Molecular spectroscopic characterisation of poly(methyl methacrylate) generated by means of atom transfer radical polymerisation (ATRP)

Chemical recycling of bromine-terminated polymers synthesized by ATRP

Chemical recycling of polymers is one of the biggest challenges in materials science. Recently, remarkable achievements have been made by utilizing polymers prepared by controlled radical polymerization to trigger low-temperature depolymerization. However, in the case of atom transfer radical polymerization (ATRP), depolymerization has nearly exclusively focused on chlorine-terminated polymers, even though the overwhelming majority of polymeric materials synthesized with this method possess a bromine end-group. Herein, we report an efficient depolymerization strategy for bromine-terminated polymethacrylates which employs an inexpensive and environmentally friendly iron catalyst (FeBr2/L). The effect of various solvents and the concentration of metal salt and ligand on the depolymerization are judiciously explored and optimized, allowing for a depolymerization efficiency of up to 86% to be achieved in just 3 minutes. Notably, the versatility of this depolymerization is exemplified by its compatibility with chlorinated and non-chlorinated solvents, and both Fe(ii) and Fe(iii) salts. This work significantly expands the scope of ATRP materials compatible with depolymerization and creates many future opportunities in applications where the depolymerization of bromine-terminated polymers is desired.

PDMAEMA from α to ω chain ends: tools for elucidating the structure of poly(2-(dimethylamino)ethyl methacrylate)

An in-depth characterization of PDMAEMA prepared by ATRP was conducted, with a focus on end group analysis. This work discusses analytical tools providing essential information about the extent of control over DMAEMA polymerization and chain extension.

Iron-catalysed atom transfer radical polyaddition for the synthesis and modification of novel aliphatic polyesters displaying lower critical solution temperature and pH-dependent release behaviors

Novel aliphatic polyesters were synthesized and quantitatively modified by click reactions to obtain amphiphilic polymer brushes for nano-carrier applications.

Synthesis of Poly(ε-caprolactone)-Based Miktoarm Star Copolymers through ROP, SA ATRC, and ATRP

The synthesis of novel branched/star copolymers which possess unique physical properties is highly desirable. Herein, a novel strategy was demonstrated to synthesize poly(ε-caprolactone) (PCL) based miktoarm star (μ-star) copolymers by combining ring-opening polymerization (ROP), styrenics-assisted atom transfer radical coupling (SA ATRC), and atom transfer radical polymerization (ATRP). From the analyses of gel permeation chromatography (GPC), proton nuclear magnetic resonance (¹H NMR), and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS), well-defined PCL-μ-PSt (PSt: polystyrene), and PCL-μ-PtBA (PtBA: poly(tert-butyl acrylate) μ-star copolymers were successfully obtained. By using atomic force microscopy (AFM), interestingly, our preliminary examinations of the μ-star copolymers showed a spherical structure with diameters of ca. 250 and 45 nm, respectively. We successfully employed combinations of synthetic techniques including ROP, SA ATRC, and ATRP with high effectiveness to synthesize PCL-based μ-star copolymers.

Fragmentation behavior of poly(methyl methacrylate) during matrix-assisted laser desorption/ionization

RATIONALE

Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) has been widely utilized for the structural characterization of various synthetic polymers. However, polymer sample molecules can occasionally decompose even in the MALDI process depending on the measurement conditions. In this work, the fragmentation behavior of radically polymerized poly(methyl methacrylate) (PMMA) during laser irradiation in MALDI was investigated in detail.

METHODS

Two types of PMMA samples with oligomeric molar mass were examined: Sample A was synthesized with an excess content of a chain transfer reagent to form simple molecules with less labile structures. Sample B was polymerized with a greater amount of a peroxide initiator without any chain transfer reagent, which resulted in the formation of various terminal and chain structures including relatively labile ones. The original components and fragment ions for the PMMA samples were precisely assigned using a high-resolution MALDI spiral time-of-flight MS system. Electrospray ionization MS measurements were also performed for comparison.

RESULTS

The PMMA chains underwent fragmentation during the MALDI process with high laser intensity even for the relatively stable sample A. The fragmentation reactions proceeded mainly through 1,5-hydrogen rearrangements via a six-membered intermediate structure. Furthermore, PMMA molecules formed via recombination termination in sample B selectively decomposed during the MALDI-MS measurements even with low laser intensity.

CONCLUSIONS

It was observed that the fragmentation reactions in the PMMA chains in MALDI with high laser power were generally the same as those in the post-source decay or collision-induced dissociation in MALDI-MS/MS measurements. Even with low laser intensity, less stable structures in the PMMA chain, especially head-to-head linkages, were readily decomposed during the MALDI process. Possible fragmentation, therefore, should be considered in the structural characterization of synthetic polymer samples by MALDI-MS.

MALDI of synthetic polymers with labile end-groups

Mass spectrometry is increasingly used in the field of synthetic polymers as a fast and accurate technique for end-group analysis. More particularly, matrix-assisted laser desorption/ionization (MALDI) has gained much popularity because it allows quite simple mass spectra to be obtained, displaying a single distribution for each polymeric species present in the sample, in contrast to electrospray ionization (ESI) which readily promotes multiple charging for most polymers. A soft ionization process, ensuring the integrity of the species upon transfer into gas phase ions, is however mandatory for polymer end-group analysis since information about the chain terminations mainly rely on the m/z values measured for polymer adducts. As compared to ESI, MALDI is sometimes suspected to be a quite "hard" ionization technique, leading to spontaneous dissociation of ionized species either in the source or during their flight time. This issue is of particular concern for polymers carrying so-called fragile end-groups arising from their mode of synthesis. In particular, controlled radical polymerization (CRP) processes, one of the most important advances in the field of polymer science during the last 20 years, allow the production of polymers with well-defined molecular distribution and low polydispersities, but they are all based on the low dissociation energy of the chemical bond between the last monomer and the terminating group. As a result, if macromolecules are activated while being ionized, this end-group is prone to fragmentation and ions measured in the mass spectra do no longer reflect the original chain composition. However, different results are reported in the literature about the ability of MALDI to generate intact ions from CRP synthetic polymers. This article reviews MALDI MS data reported for synthetic polymers produced by atom transfer radical polymerization (ATRP), reversible addition-fragmentation transfer polymerization (RAFT), and nitroxide-mediated polymerization (NMP), the three most studied CRP techniques. The general principle of each polymerization process, which defines the structure of the end-groups in both targeted macromolecules and species arising from eventual side-reactions, is first briefly presented. An overview of MALDI data reported for samples obtained upon polymerization of different monomers are then commented for each polymerization techniques with regards to the success of the ionization method to generate intact cationic adducts and its propensity to distinguish in-source fragments from polymerization side-products.

Fragmentation pathways of polymer ions

Tandem mass spectrometry (MS/MS) is increasingly applied to synthetic polymers to characterize chain-end or in-chain substituents, distinguish isobaric and isomeric species, and determine macromolecular connectivities and architectures. For confident structural assignments, the fragmentation mechanisms of polymer ions must be understood, as they provide guidelines on how to deduce the desired information from the fragments observed in MS/MS spectra. This article reviews the fragmentation pathways of synthetic polymer ions that have been energized to decompose via collisionally activated dissociation (CAD), the most widely used activation method in polymer analysis. The compounds discussed encompass polystyrenes, poly(2-vinyl pyridine), polyacrylates, poly(vinyl acetate), aliphatic polyester copolymers, polyethers, and poly(dimethylsiloxane). For a number of these polymers, several substitution patterns and architectures are considered, and questions regarding the ionization agent and internal energy of the dissociating precursor ions are also addressed. Competing and consecutive dissociations are evaluated in terms of the structural insight they provide about the macromolecular structure. The fragmentation pathways of the diverse array of polymer ions examined fall into three categories, viz. (1) charge-directed fragmentations, (2) charge-remote rearrangements, and (3) charge-remote fragmentations via radical intermediates. Charge-remote processes predominate. Depending on the ionizing agent and the functional groups in the polymer, the incipient fragments arising by pathways (1)-(3) may form ion-molecule complexes that survive long enough to permit inter-fragment hydrogen atom, proton, or hydride transfers.

Methylation of acidic moieties in poly(methyl methacrylate-co-methacrylic acid) copolymers for end-group characterization by tandem mass spectrometry

The complete structural characterization of a copolymer composed of methacrylic acid (MAA) and methyl methacrylate (MMA) units was achieved using tandem mass spectrometry. In a first step, collision-induced dissociation (CID) of sodiated MAA-MMA co-oligomers allowed us to determine the co-monomeric composition, the random nature of the copolymer and the sum of the end-group masses. However, dissociation reactions of MAA-based molecules mainly involve the acidic pendant groups, precluding individual characterization of the end groups. Therefore, methylation of all the acrylic acid moieties was performed to transform the MAA-MMA copolymer into a PMMA homopolymer, for which CID mainly proceeds via backbone cleavages. Using trimethylsilyldiazomethane as a derivatization agent, this methylation reaction was shown to be complete without affecting the end groups. Using fragmentation rules established for PMMA polymers together with accurate mass measurements of the product ions and knowledge of reagents used for the studied copolymer synthesis, a structure could be proposed for both end groups and it was found to be consistent with signals obtained in nuclear magnetic resonance spectra.

Tandem mass spectrometry of synthetic polymers

The detailed characterization of macromolecules plays an important role for synthetic chemists to define and specify the structure and properties of the successfully synthesized polymers. The search for new characterization techniques for polymers is essential for the continuation of the development of improved synthesis methods. The application of tandem mass spectrometry for the detailed characterization of synthetic polymers using the soft ionization techniques matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) and electrospray ionization mass spectrometry (ESI-MS), which became the basic tools in proteomics, has greatly been increased in recent years and is summarized in this perspective. Examples of a variety of homopolymers, such as poly(methyl methacrylate), poly(ethylene glycol), as well as copolymers, e.g. copolyesters, are given. The advanced mass spectrometric techniques described in this review will presumably become one of the basic tools in polymer chemistry in the near future.

Novel software for the assignment of peaks from tandem mass spectrometry spectra of synthetic polymers

Novel software has been developed to aid the interpretation of tandem mass spectrometry (MS/MS) data from synthetic polymers. The software is particularly focused toward aiding the end-group determination of these materials by significantly speeding up the interpretation process. This allows information on the initiator and/or chain transfer agents, used to generate the polymer, and the mechanism of termination to be inferred from the data much more rapidly. The software allows the validity of hypothesized structures to be rapidly tested by automatically annotating the data file using previously proposed fragmentation rules for synthetic polymers. Low-energy collision-induced dissociation (CID) data from methacrylate, styrene, and polyether oligomers are used as example data for the software. Exact-mass CID information was used to aid the understanding of the dissociation mechanism of the polymers. The software can use exact-mass data to provide more confidence in the results. The MS/MS results indicate that the fragmentation pathways are those previously proposed for these polymers.

Generation of end-group information from polyethers by matrix-assisted laser desorption/ionisation collision-induced dissociation mass spectrometry

A series of polyethers, namely poly(ethylene glycol) (PEG), poly(propylene glycol) (PPG), poly(butylene glycol) (PBG) and poly(tetramethylene glycol) (PTMeG), has been characterised by means of matrix-assisted laser desorption/ionisation collision-induced dissociation (MALDI-CID) using a hybrid sector orthogonal-time-of-flight (TOF) instrument. The data indicate that this technique can be used to generate information about the end-group functionality of these polymers, including in some cases information about branching of the alkyl chains of the initiating groups. Proposals are made for the fragmentation pathways for these polymers.