Radical addition–fragmentation chemistry in polymer synthesis

Non-Aufbau electronic structure in radical enzymes and control of the highly reactive intermediates

Radicals are highly reactive, short-lived chemical species that normally react indiscriminately with biological materials, and yet, nature has evolved thousands of enzymes that employ radicals to catalyze thermodynamically challenging chemistry. How these enzymes harness highly reactive radical intermediates to steer the catalysis to the correct outcome is a topic of intense investigation. Here, the results of detailed QM/MM calculations on archetype radical B12-enzymes are presented that provide new insights into how these enzymes control the reactivity of radicals within their active sites. The catalytic cycle in B12-enzymes is initiated through the formation of the 5'-deoxyadenosyl (Ado˙) moiety, a primary carbon-centred radical, which must migrate up to 8 Å to reach the target substrate to engage in the next step of the catalytic process, a hydrogen atom abstraction. Our calculations reveal that Ado˙ within the protein environment exhibits an unusual non-Aufbau electronic structure in which the singly occupied molecular orbital is lower in energy than the doubly occupied orbitals, an uncommon phenomenon known as SOMO-HOMO inversion (SHI). We find that the magnitude of SHI in the initially formed Ado˙ is larger compared to when the Ado˙ is near the intended substrate, leading to the former being relatively less reactive. The modulation of the SHI originates from Coulombic interactions of a quantum nature between a negative charge on a conserved glutamate residue and the spin on the Ado˙. Our findings support a novel hypothesis that these enzymes utilize this quantum Coulombic effect as a means of maintaining exquisite control over the chemistry of highly reactive radical intermediates in enzyme active sites.

Carbon Dioxide Capture by Emerging Innovative Polymers: Status and Perspectives

A significant amount of research has been conducted in carbon dioxide (CO2) capture, particularly over the past decade, and continues to evolve. This review presents the most recent advancements in synthetic methodologies and CO2 capture capabilities of diverse polymer-based substances, which includes the amine-based polymers, porous organic polymers, and polymeric membranes, covering publications in the last 5 years (2019-2024). It aims to assist researchers with new insights and approaches to develop innovative polymer-based materials with improved capturing CO2 capacity, efficiency, sustainability, and cost-effective, thereby addressing the current obstacles in carbon capture and storage to sooner meeting the net-zero CO2 emission target.

Unravelling Competitive Interactions between Polymer Side Chains and End Groups with β-Cyclodextrin

This study investigates unexpected competitive host-guest interactions of β-cyclodextrin (β-CD), which can occur with polymers in aqueous solution, using the examples of the two polymers poly(oligo(ethylene glycol) methyl ether methacrylate) and poly(glycerol mono methacrylate). Systematic structural modifications of the polymer provide insight into the host-guest interaction with β-CD and the competition between side chains and end groups such as hydrophobic end groups remaining from reversible addition fragmentation chain transfer polymerization or intentionally implemented molecular recognition units such as arylazopyrazole photoswitches.

Combining Crystallization-Driven Self-Assembly with Reverse Sequence Polymerization-Induced Self-Assembly Enables the Efficient Synthesis of Hydrolytically Degradable Anisotropic Block Copolymer Nano-objects Directly in Concentrated Aqueous Media

Herein we combine the well-known processing advantages conferred by polymerization-induced self-assembly (PISA) with crystallization-driven self-assembly (CDSA) to achieve the efficient synthesis of hydrolytically degradable, highly anisotropic block copolymer nano-objects directly in aqueous solution at 30% w/w solids. This new strategy involves a so-called reverse sequence PISA protocol that employs poly(l-lactide) (PLLA) as the crystallizable core-forming block and poly(N,N'-dimethylacrylamide) (PDMAC) as the water-soluble non-ionic coronal block. Such syntheses result in PDMAC-rich anisotropic nanoparticles. Depending on the target diblock copolymer composition, either rod-like nanoparticles or diamond-like platelets can be obtained. Furthermore, N-Acryloylmorpholine is briefly evaluated as an alternative hydrophilic vinyl monomer to DMAC. Given that the PLLA block can undergo either hydrolytic or enzymatic degradation, such nanoparticles are expected to offer potential applications in various fields, including next-generation sustainable Pickering emulsifiers.

Protein-polymer bioconjugation, immobilization, and encapsulation: a comparative review towards applicability, functionality, activity, and stability

Polymer-based biomaterials have received a lot of attention due to their biomedical, agricultural, and industrial potential. Soluble protein-polymer bioconjugates, immobilized proteins, and encapsulated proteins have been shown to tune enzymatic activity, improved pharmacokinetic ability, increased chemical and thermal stability, stimuli responsiveness, and introduced protein recovery. Controlled polymerization techniques, increased protein-polymer attachment techniques, improved polymer surface grafting techniques, controlled polymersome self-assembly, and sophisticated characterization methods have been utilized for the development of well-defined polymer-based biomaterials. In this review we aim to provide a brief account of the field, compare these methods for engineering biomaterials, provide future directions for the field, and highlight impacts of these forms of bioconjugation.

Hybrid Nanoparticles from Random Polyelectrolytes and Carbon Dots

The present study concerns the preparation of hybrid nanostructures composed of carbon dots (CDs) synthesized in our lab and a double-hydrophilic poly(2-dimethylaminoethyl methacrylate-co-oligo(ethylene glycol) methyl ether methacrylate) (P(DMAEMA-co-OEGMA)) random copolymer through electrostatic interactions between the negatively charged CDs and the positively charged DMAEMA segments of the copolymer. The synthesis of P(DMAEMA-co-OEGMA) copolymer was conducted through RAFT polymerization. Furthermore, the copolymer was converted into a strong cationic random polyelectrolyte through quaternization of the amine groups of DMAEMA segments with methyl iodide (CH3I), and it was subsequently utilized for the complexation with the carbon dots. The molecular, physicochemical, and photophysical characterization of the aqueous solution of the copolymers and their hybrid nanoparticles was conducted using dynamic and electrophoretic light scattering (DLS, ELS) and spectroscopic techniques, such as UV-Vis, fluorescence (FS), and FT-IR spectroscopy. In addition, studies of their aqueous solution using DLS and ELS showed their responsiveness to external stimuli (pH, temperature, ionic strength). Finally, the interaction of selected hybrid nanoparticles with iron (III) ions was confirmed through FS spectroscopy, demonstrating their potential application for heavy metal ions sensing.

Four-Component Statistical Copolymers by RAFT Polymerization

This manuscript serves as the starting point for in-depth research of multicomponent, statistical, methacrylate-based copolymers that potentially mimic the behavior of proteins in aqueous solutions. These synthetic macromolecules are composed of specially chosen comonomers: methacrylic acid (MAA), oligoethylene glycol methyl ether methacrylate (OEGMA475), 2-(dimethylamino)ethyl methacrylate (DMAEMA) and benzyl methacrylate (BzMA). Monomer choice was based on factors such as the chemical nature of pendant functional groups, the polyelectrolyte/polyampholyte and amphiphilic character and the overall hydrophobic-hydrophilic balance (HLB) of the obtained quaterpolymers. Their synthesis was achieved via a one-pot reversible addition fragmentation chain transfer (RAFT) polymerization in two distinct compositions and molecular architectures, linear and hyperbranched, respectively, in order to explore the effects of macromolecular topology. The resulting statistical quaterpolymers were characterized via 1H-NMR and ATR-FTIR spectroscopies. Their behavior in aqueous solutions was studied by dynamic (DLS) and electrophoretic light scattering (ELS) and fluorescence spectroscopy (FS), producing vital information concerning their self-assembly and the structure of the formed aggregates. The physicochemical studies were extended by tuning parameters such as the solution pH and ionic strength. Finally, the quaterpolymer behavior in FBS/PBS solutions was investigated to test their colloid stability and biocompatibility in an in vivo-mimicking, biological fluid environment.

Block and Statistical Copolymers of Methacrylate Monomers with Dimethylamino and Diisopropylamino Groups on the Side Chains: Synthesis, Chemical Modification and Self-Assembly in Aqueous Media

The synthesis of amphiphilic diblock and statistical (random) copolymers of poly(dimethylamino ethyl methacrylate) and poly((2-(diisopropylamino) ethyl methacrylate) using the reversible addition-fragmentation chain transfer polymerization technique (RAFT polymerization) is reported. The precursor copolymers were chemically modified to create derivative copolymers of polyelectrolyte and polyampholyte nature with novel solution properties. Moreover, their molecular and physicochemical characteristics, as well as their self-assembly in aqueous media as a function of molecular architecture and composition, are investigated by using size exclusion chromatography, spectroscopic characterization techniques and light scattering techniques. Furthermore, the behavior and properties of the obtained micelles and aggregates were studied, depending on the pH, temperature and ionic strength of the aqueous solutions. The response of the systems to changes in these parameters shows interesting behavior and new properties that are useful for their utilization as nanocarriers of pharmaceutical compounds.

Using RAFT Polymerization Methodologies to Create Branched and Nanogel-Type Copolymers

This review aims to highlight the most recent advances in the field of the synthesis of branched copolymers and nanogels using reversible addition-fragmentation chain transfer (RAFT) polymerization. RAFT polymerization is a reversible deactivation radical polymerization technique (RDRP) that has gained tremendous attention due to its versatility, compatibility with a plethora of functional monomers, and mild polymerization conditions. These parameters lead to final polymers with good control over the molar mass and narrow molar mass distributions. Branched polymers can be defined as the incorporation of secondary polymer chains to a primary backbone, resulting in a wide range of complex macromolecular architectures, like star-shaped, graft, and hyperbranched polymers and nanogels. These subcategories will be discussed in detail in this review in terms of synthesis routes and properties, mainly in solutions.

Development of Ring-Expansion RAFT Polymerization of tert-Butyl Acrylate with a Cyclic Trithiocarbonate Derivative toward the Facile Synthesis of Cyclic Polymers

Polymers with cyclic topology have no terminal structure and, therefore, exhibit various unique physical and functional properties compared to those of linear analogs. In this paper, we report an innovative methodology for the synthesis of cyclic polymers via ring-expansion RAFT (RE-RAFT) polymerization of vinyl monomers using a cyclic trithiocarbonate derivative (CTTC) as a RAFT agent. RE-RAFT of tert-butyl acrylate (TBA) was performed to yield a mixture of polymers exhibiting a bimodal size exclusion chromatography (SEC) trace. Both the peak top molecular weights shifted to higher-molecular-weight regions as the monomer conversion increased. The structure of the resulting polymer mixture was examined by 1H NMR and MALDI-TOF-MS. Detailed studies indicated that the obtained polymer of higher molecular weight was one of the large-sized cyclic polymers generated by the fusion of smaller-sized cyclic polymers during the RE-RAFT polymerization process. This approach opens the door to the simple synthesis of well-controlled cyclic polymers with complex structures, such as alternating and multi-block repeat unit sequences.

Reversible Thiyl Radical Addition-Fragmentation Chain Transfer Polymerization

Developing reversible-deactivation radical polymerization (RDRP) methods that could directly control the thiyl radical propagation is highly desirable yet remains challenging in modern polymer chemistry. Here, we reported the first reversible thiyl radical addition-fragmentation chain transfer (SRAFT) polymerization strategy, which utilizes allyl sulfides as chain transfer agents for reversibly deactivating the propagating thiyl radicals, thus allowing us to directly control a challenging thiyl radical chain polymerization to afford polymers with well-defined architectures. A linear dependence of molecular weight on conversion, high chain-end fidelity, and efficient chain extension proved good controllability of the polymerization. In addition, density functional theory calculations provided insight into the reversible deactivation ability of allyl sulfides. The SRAFT strategy developed in this work represents a promising platform for discovering new controlled polymerizations based on thiyl radical chemistry.

Barbier Polymerization-Induced Emission towards Fully Substituted Polyethylene Analogues with Non-Traditional Intrinsic Luminescence

The properties of polyethylene are highly dependent on the variety and quantity of substitutions. Generally, polyethylene can only be fully substituted with fluorine atoms, mainly e. g., polytetrafluoroethylene and nafion, because atomic radius of fluorine atom is small enough. The preparation of fully substituted polyethylene analogues (FSPEA) and their non-traditional intrinsic luminescence (NTIL) are attractive, especially for substitutions with relatively larger atomic radii than a fluorine atom. Here, Barbier polymerization-induced emission (PIE) is demonstrated as a universal method for the molecular design of NTIL type FSPEAs with intriguing aggregation-induced emission (AIE) behaviors. Through Barbier polymerization of diphenyldichloromethane and different peroxyesters in the presence of Mg in one pot, a series of FSPEAs, including polytriphenylethanol (PTPE), polydiphenylfurylethanol (PDPFE), polydiphenylthiophenylethanol (PDPTE) and polydiphenylnaphthylethanol (PDPNE) have been successfully prepared. Further potential applications for explosive detection, artificial light-harvesting system and white phosphor-converted light-emitting diode are investigated. Therefore, this work opens up a new approach for the molecular design of FSPEA with non-conjugated luminescence, which may cause inspirations to different research fields like polyolefin and luminescent materials.

Functional Acrylic Resins Prepared via Photo-Induced Telomerization Using Tetrabromomethane as Telogen

Novel method of obtaining functional acrylic resins (FARs) containing carboxyl- and benzophenone groups (in-chain functionalization) and terminal Br atoms was verified. Acrylic oligomers were prepared by a solution-free, UV-initiated telomerization process of basic monomer (n-butyl acrylate) and functional monomers (acrylic acid and 4-acrylooxybenzophenone) in the presence of radical photoinitiator and different amount of tetrabromomethane (CBr4) as telogen. The effect of telogen content on UV-telomerization kinetics as well as physicochemical and thermal (Tg) properties of FARs was investigated. A telogen content higher than 5 wt. parts does not affect the UV-telomerization rate (photo-DSC), the molecular weights of telomers (GPC), or their glass transition temperature (DSC), but it significantly increases the conversion of monomers (up to 88%) and lowers the viscosity of FARs (approx. 6 Pa·s). NMR studies confirmed the inclusion of CBr4 in the structure of functional acrylic telomers.

Polymerization Induced Microphase Separation for the Fabrication of Nanostructured Materials

Polymerization induced microphase separation (PIMS) is a strategy used to develop unique nanostructures with highly useful morphologies through the microphase separation of emergent block copolymers during polymerization. In this process, nanostructures are formed with at least two chemically independent domains, where at least one domain is composed of a robust crosslinked polymer. Crucially, this synthetically simple method is readily used to develop nanostructured materials with the highly coveted co-continuous morphology, which can also be converted into mesoporous materials by selective etching of one domain. As PIMS exploits a block copolymer microphase separation mechanism, the size of each domain can be tightly controlled by modifying the size of block copolymer precursors, thus providing unparalleled control over nanostructure and resultant mesopore sizes. Since its inception 11 years ago, PIMS has been used to develop a vast inventory of advanced materials for an extensive range of applications including biomedical devices, ion exchange membranes, lithium-ion batteries, catalysis, 3D printing, and fluorescence-based sensors, among many others. In this review, we provide a comprehensive overview of the PIMS process, summarize latest developments in PIMS chemistry, and discuss its utility in a wide variety of relevant applications.

A Strategy for Controlling the Polymerizations of Thiyl Radical Propagation by RAFT Agents

The ability to extend the polymerizations of thiyl radical propagation to be regulated by existing controlled methods would be highly desirable, yet remained very challenging to achieve because the thiyl radicals still cannot be reversibly controlled by these methods. In this article, we reported a novel strategy that could enable the radical ring-opening polymerization of macrocyclic allylic sulfides, wherein propagating specie is thiyl radical, to be controlled by reversible addition-fragmentation chain transfer (RAFT) agents. The key to the success of this strategy is the propagating thiyl radical can undergo desulfurization with isocyanide and generate a stabilized alkyl radical for reversible control. Systematic optimization of the reaction conditions allowed good control over the polymerization, leading to the formation of polymers with well-defined architectures, exemplified by the radical block copolymerization of macrocyclic allylic sulfides and vinyl monomers and the incorporation of sequence-defined segments into the polymer backbone. This work represents a significant step toward directly enabling the polymerizations of heteroatom-centered radical propagation to be regulated by existing reversible-deactivation radical polymerization techniques.

Synthetic exploration of electrophilic xanthylation via powerful N-xanthylphthalimides

Organic xanthates are broadly applied as synthetic intermediates and bioactive molecules in synthetic chemistry. Electrophilic xanthylation represents a promising approach but has rarely been explored mainly due to the lack of powerful electrophilic reagents. Herein, synthetic exploration of electrophilic xanthylation via powerful N-xanthylphthalimides was investigated. This strategy might provide a new avenue to less-concerned but meaningful electrophilic xanthylation in organic synthesis. With the help of these powerful reagents, electrophilic xanthylation of a wide range of substrates including aryl/alkenyl boronic acids, β-keto esters, 2-oxindole, and alkyl amines, as well as previously inaccessible phenols (first report) was achieved under mild reaction conditions. Notably, this simple electrophilic xanthylation of alkyl amine substrates will occur in the desulfuration reaction, consistent with the previously reported methods. Similarly, xanthamide and thioxanthate groups could also be transformed into desired nucleophiles via this electrophilic reagent strategy. The broad substrate scope, excellent functional group compatibility and late-stage functionalization of bioactive or functional molecules made them very attractive as general reagents which will allow rapid incorporation of SC(S)R (R = OEt, Oalkyl, NEt2 and SEt) into the target molecules.

Ketyl Radical Anion Mediated Radical Polymerization and Anionic Ring-Opening Polymerization to Give Polymers with Low Molecular Weight Distribution

The development of novel polymerization capable of yielding polymers with low molecular weight distribution (Đ) is essential and significant in polymer chemistry, where monofunctional initiator contains only one initiation site in these polymerizations generally. Here, ketyl radical anion species is introduced to develop a novel Ketyl Mediated Polymerization (KMP), which enables radical polymerization at carbon radical site and anionic ring-opening polymerization at oxygen anion site, respectively. Meanwhile, polymerization and corresponding organic synthesis generally couldn't be performed simultaneously in one pot. Through KMP, organic synthesis and polymerization are achieved in one pot, where small molecules (cyclopentane derivates) and polymers with low Đ are successfully prepared under mild condition simultaneously. At the initiation step, both organic synthesis and polymerization are initiated by single electron transfer reaction with ketyl radical anion formation. Cyclopentane derivates are synthesized through 3-3 coupling reaction and cyclization. Polystyrene and polycaprolactone with low Đ and a full monomer conversion are prepared by KMP via radical polymerization and anionic ring-opening polymerization, respectively. This work therefore enables both organic synthesis and two different polymerizations from same initiation system, which saves time, labour, resource and energy and expands the reaction mode and method libraries of organic chemistry and polymer chemistry.

Sustainable Elastomers for Actuators: "Green" Synthetic Approaches and Material Properties

Elastomeric materials have great application potential in actuator design and soft robot development. The most common elastomers used for these purposes are polyurethanes, silicones, and acrylic elastomers due to their outstanding physical, mechanical, and electrical properties. Currently, these types of polymers are produced by traditional synthetic methods, which may be harmful to the environment and hazardous to human health. The development of new synthetic routes using green chemistry principles is an important step to reduce the ecological footprint and create more sustainable biocompatible materials. Another promising trend is the synthesis of other types of elastomers from renewable bioresources, such as terpenes, lignin, chitin, various bio-oils, etc. The aim of this review is to address existing approaches to the synthesis of elastomers using "green" chemistry methods, compare the properties of sustainable elastomers with the properties of materials produced by traditional methods, and analyze the feasibility of said sustainable elastomers for the development of actuators. Finally, the advantages and challenges of existing "green" methods of elastomer synthesis will be summarized, along with an estimation of future development prospects.

RAFT Polymerisation and Hypercrosslinking Improve Crosslink Homogeneity and Surface Area of Styrene Based PolyHIPEs

The influence of a polymerisation mechanism (reversible addition-fragmentation chain transfer; RAFT vs. free radical polymerisation; FRP) on the porous structure of highly porous poly(styrene-co-divinylbenzene) polymers was investigated. The highly porous polymers were synthesised via high internal phase emulsion templating (polymerizing the continuous phase of a high internal phase emulsion), utilising either FRP or RAFT processes. Furthermore, residual vinyl groups in the polymer chains were used for the subsequent crosslinking (hypercrosslinking) applying di-tert-butyl peroxide as the source of radicals. A significant difference in the specific surface area of polymers prepared by FRP (between 20 and 35 m²/g) and samples prepared by RAFT polymerisation (between 60 and 150 m²/g) was found. Based on the results from gas adsorption and solid state NMR, it could be concluded that the RAFT polymerisation affects the homogeneous distribution of the crosslinks in the highly crosslinked styrene-co-divinylbenzene polymer network. During the initial crosslinking, RAFT polymerisation leads to the increase in mesopores with diameters between 2 and 20 nm, resulting in good accessibility of polymer chains during the hypercrosslinking reaction, which is reflected in increased microporosity. The fraction of micropores created during the hypercrosslinking of polymers prepared via RAFT is around 10% of the total pore volume, which is up to 10 times more than for polymers prepared by FRP. Specific surface area, mesopore surface area, and total pore volume after hypercrosslinking reach almost the same values, regardless of the initial crosslinking. The degree of hypercrosslinking was confirmed by determination of the remaining double bonds by solid-state NMR analysis.

Rapid RAFT Polymerization of Acrylamide with High Conversion

Rapid RAFT polymerization can significantly improve production efficiency of PAM with designed molecular structure. This study shows that ideal Reversible Addition–Fragmentation Chain Transfer (RAFT) polymerization of acrylamide is achieved in dimethyl sulfoxide (DMSO) solution at 70 °C. The key to success is the appropriate choice of both a suitable RAFT chain transfer agent (CTA) and initiating species. It is illustrated that dodecyl trithiodimethyl propionic acid (DMPA) is a suitable trithiocarbonate RAFT CTA and is synthesized more easily than other CTAs. Compared to other RAFT processes of polymers, the reaction system shortens reaction time, enhances conversion, and bears all the characteristics of a controlled radical polymerization. The calculation result shows that high concentrations can reduce high conversions, accelerate the reaction rate, and widen molecular weight distributions slightly. This work proposes an excellent approach for rapid synthesis of PAMs with a restricted molecular weight distribution.

Recent Advances and Challenges in Barbier Polymerization

The Barbier reaction, a classical name reaction for carbon-carbon bond formation, has played important roles in organic chemistry for over 120 years. The introduction of the Barbier reaction into polymer chemistry for the development of a novel Barbier polymerization, expands the methodology, monomer, chemical structure and property libraries of polymerization, aggregation-induced emission (AIE) and non-traditional intrinsic luminescence (NTIL). This mini review focuses on Barbier polymerization, including the brief introduction of the history and importance of polymerization methods design and the achievements of Barbier polymerization from molecular design strategies, functionalities and properties. An outlook of Barbier polymerization is also proposed. This mini review on Barbier polymerization therefore may cause inspirations to scientists in different fields.

Evaluation of linear versus star-like polymer anti-cancer nanomedicines in mouse models

Nanomedicines are considered next generation therapeutics with advanced therapeutic properties and reduced side effects. Herein, we introduce tailored linear and star-like water-soluble nanosystems as stimuli-sensitive nanomedicines for the treatment of solid tumors or hematological malignancies. The polymer carrier and drug pharmacokinetics were independently evaluated to elucidate the relationship between the nanosystem structure and its distribution in the body. Positron emission tomography and optical imaging demonstrated enhanced tumor accumulation of the polymer carriers in 4T1-bearing mice with increased tumor-to-blood and tumor-to-muscle ratios. Additionally, there was a significant accumulation of doxorubicin bound to various polymer carriers in EL4 tumors, as well as excellent in vivo therapeutic activity in EL4 lymphoma and moderate efficacy in 4T1 breast carcinoma. The linear nanomedicine showed at least comparable pharmacologic properties to the star-like nanomedicines regarding doxorubicin transport. Therefore, if multiple parameters are considered such as its optimized structure and simple and reproducible synthesis, this polymer carrier system is the most promising for further preclinical and clinical investigations.

Sulfur-Free Radical RAFT Polymerization of Methacrylates in Homogeneous Solution: Design of exo-Olefin Chain-Transfer Agents (R-CH2 C(=CH2 )Z)

In this work, the development of exo-olefin compounds (R-CH₂ C(=CH₂ )Z) as chain-transfer agents for the sulfur-free reversible addition-fragmentation chain transfer (RAFT) radical polymerization of methacrylates in homogeneous solution is described. A series of exo-olefin compounds with a methyl methacrylate (MMA) dimer structure as the R group and a substituted α-methylstyrene unit as the -CH₂ C(=CH₂ )Z (Z: Ph-Y) group were synthesized and used for the radical polymerization of MMA in toluene and PhC(CF₃ )₂ OH. These compounds underwent transfer of the CH₂ C(=CH₂ )Z group via addition-fragmentation of the propagating methacryloyl radical. More electron-donating (Y) substituents, such as methoxy and dimethylamino groups, produced polymers with narrower molecular weight distributions. A continuous monomer addition method further improved molecular weight control and enabled the synthesis of colorless, sulfur-free, multiblock copolymers of methacrylates in homogeneous solutions.

Mannosylated Polycations Target CD206+ Antigen-Presenting Cells and Mediate T-Cell-Specific Activation in Cancer Vaccination

Immunotherapy is deemed one of the most powerful therapeutic approaches to treat cancer. However, limited response and tumor specificity are still major challenges to address. Herein, mannosylated polycations targeting mannose receptor- are developed as vectors for plasmid DNA (pDNA)-based vaccines to improve selective delivery of genetic material to antigen-presenting cells and enhance immune cell activation. Three diblock glycopolycations (M₁₅A₁₂, M₂₉A₂₅, and M₅₈A₄₅) and two triblock copolymers (M₂₉A₂₉B₉ and M₆₂A₅₂B₃₂) are generated by using mannose (M), agmatine (A), and butyl (B) derivatives to target CD206, complex nucleic acids, and favor the endosomal escape, respectively. All glycopolycations efficiently complex pDNA at N/P ratios <5, protecting the pDNA from degradation in a physiological milieu. M₅₈A₄₅ and M₆₂A₅₂B₃₂ complexed with plasmid encoding for antigenic ovalbumin (pOVA) trigger the immune activation of cultured dendritic cells, which present the SIINFEKL antigenic peptide via specific major histocompatibility complex-I. Importantly, administration of M₅₈A₄₅/pOVA elicits SIINFEKL-specific T-cell response in C56BL/6 mice bearing the melanoma tumor model B16-OVA, well in line with a reduction in tumor growth. These results qualify mannosylation as an efficient strategy to target immune cells in cancer vaccination and emphasize the potential of these glycopolycations as effective delivery vehicles for nucleic acids.

Antiviral Polymer Brushes by Visible-Light-Induced, Oxygen-Tolerant Covalent Surface Coating

This work presents a novel route for creating metal-free antiviral coatings based on polymer brushes synthesized by surface-initiated photoinduced electron transfer-reversible addition-fragmentation chain transfer (SI-PET-RAFT) polymerization, applying eosin Y as a photocatalyst, water as a solvent, and visible light as a driving force. The polymer brushes were synthesized using N-[3-(decyldimethyl)-aminopropyl] methacrylamide bromide and carboxybetaine methacrylamide monomers. The chemical composition, thickness, roughness, and wettability of the resulting polymer brush coatings were characterized by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), water contact angle measurements, and ellipsometry. The antiviral properties of coatings were investigated by exposure to severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and avian influenza viruses, with further measurement of residual viable viral particles. The best performance was obtained with Cu surfaces, with a ca. 20-fold reduction of SARS-Cov-2 and a 50-fold reduction in avian influenza. On the polymer brush-modified surfaces, the number of viable virus particles decreased by about 5-6 times faster for avian flu and about 2-3 times faster for SARS-CoV-2, all compared to unmodified silicon surfaces. Interestingly, no significant differences were obtained between quaternary ammonium brushes and zwitterionic brushes.

Nanomedicine and versatile therapies for cancer treatment

The higher prevalence of cancer is related to high rates of mortality and morbidity worldwide. By virtue of the properties of matter at the nanoscale, nanomedicine is proven to be a powerful tool to develop innovative drug carriers with greater efficacies and fewer side effects than conventional therapies. In this review, different nanocarriers for controlled drug release and their routes of administration have been discussed in detail, especially for cancer treatment. Special emphasis has been given on the design of drug delivery vehicles for sustained release and specific application methods for targeted delivery to the affected areas. Different polymeric vehicles designed for the delivery of chemotherapeutics have been discussed, including graft copolymers, liposomes, hydrogels, dendrimers, micelles, and nanoparticles. Furthermore, the effect of dimensional properties on chemotherapy is vividly described. Another integral section of the review focuses on the modes of administration of nanomedicines and emerging therapies, such as photothermal, photodynamic, immunotherapy, chemodynamic, and gas therapy, for cancer treatment. The properties, therapeutic value, advantages, and limitations of these nanomedicines are highlighted, with a focus on their increased performance versus conventional molecular anticancer therapies.

Lewis Base Catalyzed Synthesis of Sulfur Heterocycles via the C1‐Pyridinium Enolate

While the addition of C1‐Lewis base enolates to carbonyls and related structures are well established, the related addition to thiocarbonyls compounds are unknown. Herein, we report a reaction cascade in which a C1‐pyridinium enolate undergos addition to dithioesters, trithiocarbonates and xanthates. The reaction provides access to a range of dihydrothiophenes and dihydrothiopyrans (28‐examples). Mechanistic investigations, including isolation of intermediates, electronic correlation, and kinetic isotope effect studies support the viability of an activated acid intermediate giving rise to the C1‐pyridinium enolate which undergoes turnover limiting cyclization. Subsequent formation of a β‐thiolactone regenerates the catalyst with loss of carbon oxysulfide providing the observed products.

Linear Block Copolymer Synthesis

Block copolymers form the basis of the most ubiquitous materials such as thermoplastic elastomers, bridge interphases in polymer blends, and are fundamental for the development of high-performance materials. The driving force to further advance these materials is the accessibility of block copolymers, which have a wide variety in composition, functional group content, and precision of their structure. To advance and broaden the application of block copolymers will depend on the nature of combined segmented blocks, guided through the combination of polymerization techniques to reach a high versatility in block copolymer architecture and function. This review provides the most comprehensive overview of techniques to prepare linear block copolymers and is intended to serve as a guideline on how polymerization techniques can work together to result in desired block combinations. As the review will give an account of the relevant procedures and access areas, the sections will include orthogonal approaches or sequentially combined polymerization techniques, which increases the synthetic options for these materials.

Two plus One: Combination Therapy Tri-systems Involving Two Membrane-Disrupting Antimicrobial Macromolecules and Antibiotics

The escalating issue of multidrug-resistant (MDR) bacteria indicates the urgent need for new and effective strategies to combat this global health challenge. Here, we describe a new combinatorial approach that can be put forward for experimental therapy application against MDR bacteria. Specifically, we have developed a tri-system that includes the coadministration of two different membrane-disrupting-type antimicrobial agents─a synthetic antimicrobial polymer P and an antimicrobial peptide (AMP) colistin methanesulfonate (Col)─in conjunction with an antibiotic [doxycycline (Dox), rifampicin (Rif), or azithromycin (Azi)]. Traditionally, the administration of membrane-disrupting antimicrobial agents causes toxicity, but, in comparison, we demonstrated synergy and biocompatibility using this combinatorial approach. Checkerboard assays showed the occurrence of synergistic interactions in Col-Dox-P, Col-Rif-P, and Col-Azi-P tri-systems against wild-type and MDR Pseudomonas aeruginosa, with the Col-Dox-P system being the most effective. The ability to synergize thus enables the use of a lower dosage in combinations compared to the standalone agents. The tri-systems not only demonstrated bacteriostatic activity but were also bactericidal. For example, the Col-Dox-P system (at 8, 4, and 8 μg mL^-1, respectively) and the Col-Rif-P system (at 4, 8, and 16 μg mL^-1, respectively) were able to kill >99.999% of planktonic P. aeruginosa cells within 3 h of treatment. More importantly, an improvement of the therapeutic/selectivity index was achieved via combination therapy. Taking the Col-Dox-P system as an example, its biocompatibility with murine embryonic fibroblast cells was found to be comparable to that of polymer P alone despite the synergistic enhancement in antimicrobial activity of the combination. This resulted in a significant increase in selectivity by 16-fold for the Col-Dox-P combination system compared to P alone. Furthermore, the broad applicability of this tri-system strategy was demonstrated via the successful application of the AMP melittin in place of Col or P. Overall, this study sheds new insights on the application of membrane-disrupting antimicrobial agents in combination therapy and their potential for safer clinical use. Additionally, the information gathered in this study could inform the development of future combination therapy systems involving the simultaneous employment of multiple AMPs with antibiotics.

The effect of experimental conditions on the formation of dixanthogen by triiodide oxidation in the determination of ethyl xanthate by HPLC-ICP-MS/MS

The rising concern over the environmental impact of xanthates, especially in the arctic region, has increased the need to study these traditional flotation reagents in greater detail. The environmental concern relates mostly to the formation of carbon disulfide (CS₂) and the heavy metal complexes of xanthates. Due to the unstable nature and multiple reaction mechanisms of xanthates, their reliable determination at low concentration levels is difficult. In this study, a xanthate pretreatment method was optimized and applied for the determination of ethyl xanthate (EX⁻) by high performance liquid chromatography–inductively coupled plasma tandem mass spectrometry (HPLC–ICP-MS/MS). Ethyl xanthate was oxidized to diethyl dixanthogen ((EX)₂) by triiodide (I₃⁻) in aqueous solution and the formed (EX)₂ was extracted into n-hexane. Important experimental parameters, including pH, I₃⁻ amount, and oxidation time, were optimized and the detection limit of 0.29 mg L⁻¹ for potassium ethyl xanthate was obtained. During the optimization experiments, it was found that the oxidation reaction resulted in multiple products, decreasing the efficiency of (EX)₂ formation and, therefore, the sensitivity of the method. The proposed method was applied to wastewater samples with recoveries of 105–106%. This study provides a selective method for the determination of ethyl xanthate and introduces novel information on the parameters affecting the oxidation of xanthates.

Thermal expansion of free volume in "classic" and regulated dimethacrylates: photocured directly and via a mask to study pillar formation

The temperature dependence of free volume in dimethacrylates (poly2M), cured by direct irradiation (poly2M-A) or via a mask (poly2M-B), and in a thiol-based 2M sample (poly2M-co-EDDT), was investigated by positron annihilation lifetime spectroscopy (PALS) and dilatometry (DIL) to study the influence of thiol regulation on the microstructure via free volume characteristics. It was found that the free volume fraction as determined from experimental data by using the standard spherical approach for the hole shapes showed systematic differences from the analogous quantity as evaluated from the lattice-hole theory. Much better results were obtained for cylindrical holes, which expand 'anisotropically' in poly2M samples and 'isotropically' in the poly2M-co-EDDT resin. In addition, the hydrogen bond changes and the conversion of monomers in cured samples studied by near infra-red spectroscopy (NIR) revealed spectrum-structure correlations for the final cured thermosets.

Recent Advances in the Synthesis of Complex Macromolecular Architectures Based on Poly(N-vinyl pyrrolidone) and the RAFT Polymerization Technique

Recent advances in the controlled RAFT polymerization of complex macromolecular architectures based on poly(N-vinyl pyrrolidone), PNVP, are summarized in this review article. Special interest is given to the synthesis of statistical copolymers, block copolymers, and star polymers and copolymers, along with graft copolymers and more complex architectures. In all cases, PNVP is produced via RAFT techniques, whereas other polymerization methods can be employed in combination with RAFT to provide the desired final products. The advantages and limitations of the synthetic methodologies are discussed in detail.

Design of biointerfaces composed of soft materials using controlled radical polymerizations

Soft interface materials have an immense potential for the improvement of biointerfaces, which are the interface of biological and artificially designed materials. Controlling the chemical and physical structures of the interfaces at the nanometer level plays an important role in understanding the mechanism of the functioning and its applications. Controlled radical polymerization (CRP) techniques, including atom transfer radical polymerization (ATRP) and reversible addition-fragmentation chain-transfer (RAFT) polymerization, have been developed in the field of precision polymer chemistry. It allows the formation of well-defined surfaces such as densely packed polymer brushes and self-assembled nanostructures of block copolymers. More recently, a novel technique to prepare polymers containing biomolecules, called biohybrids, has also been developed, which is a consequence of the advancement of CRP so as to proceed in an aqueous media with oxygen. This review article summarizes recent advances in CRP for the design of biointerfaces.

Schmidt D, Dieden R, Weydert M, S. Shaplov A. RAFT solution copolymerization of styrene and 1,3-butadiene and its application as a tool for block copolymer preparation

For the first time, random copolymers of styrene (St) and 1,3-butadiene (Bd) (poly(Stn-r-Bdm), styrene butadiene rubber, SBR) were prepared via solution RAFT polymerization, that was further extended to produce poly[Xn-b-(Stm-r-Bdk)] block copolymers.

Thiocarbonyl Chemistry in Polymer Science

Organised by reaction type, this review highlights the unique reactivity of thiocarbonyl (C=S) groups with radicals, anions, nucleophiles, electrophiles, in pericyclic reactions, and in the presence of light. In the...

A bioinspired stimuli-responsive amino acid-based antibacterial drug delivery system in cancer therapy

Design of tyrosine based stimuli responsive antibacterial drug delivery system with potential application in cancer therapy.