Energy storage study of ferroelectric poly(vinylidene fluoride-trifluoroethylene-chlorotrifluoroethylene) terpolymers

Energy Storage Performance of Polymer-Based Dielectric Composites with Two-Dimensional Fillers

Dielectric capacitors have garnered significant attention in recent decades for their wide range of uses in contemporary electronic and electrical power systems. The integration of a high breakdown field polymer matrix with various types of fillers in dielectric polymer nanocomposites has attracted significant attention from both academic and commercial sectors. The energy storage performance is influenced by various essential factors, such as the choice of the polymer matrix, the filler type, the filler morphologies, the interfacial engineering, and the composite structure. However, their application is limited by their large amount of filler content, low energy densities, and low-temperature tolerance. Very recently, the utilization of two-dimensional (2D) materials has become prevalent across several disciplines due to their exceptional thermal, electrical, and mechanical characteristics. Compared with zero-dimensional (0D) and one-dimensional (1D) fillers, two-dimensional fillers are more effective in enhancing the dielectric and energy storage properties of polymer-based composites. The present review provides a comprehensive overview of 2D filler-based composites, encompassing a wide range of materials such as ceramics, metal oxides, carbon compounds, MXenes, clays, boron nitride, and others. In a general sense, the incorporation of 2D fillers into polymer nanocomposite dielectrics can result in a significant enhancement in the energy storage capability, even at low filler concentrations. The current challenges and future perspectives are also discussed.

Multiscale Simulations on Synaptic Signal Transduction of Energy-Harvesting P(VDF-TrFE)-Based Artificial Retina

Ferroelectric polymers have drawn a lot of research concerns recently due to their lightness, mechanical flexibility, conformability, and facile processability. Remarkably, these polymers can be used to fabricate biomimetic devices, such as artificial retina or electronic skin, to realize artificial intelligence. The artificial visual system behaves as a photoreceptor, converting incoming light into electric signals. The most widely studied ferroelectric polymer, poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE)], can be used as the building block in this visual system to implement synaptic signal generation. There is a void in computational investigations on the complicated working picture of P(VDF-TrFE)-based artificial retina from a microscopic mechanism to a macroscopic mechanism. Therefore, a multiscale simulation method combining quantum chemistry calculations, first-principles calculations, Monte Carlo simulations, and the Benav model was established to illustrate the whole working principle, involving synaptic signal transduction and consequent communication with neuron cells, of the P(VDF-TrFE)-based artificial retina. This newly developed multiscale method not only can be further applied to other energy-harvesting systems involving synaptic signals but also would be helpful to build microscopic/macroscopic pictures within these energy-harvesting devices.

Progress on Polymer Dielectrics for Electrostatic Capacitors Application

Polymer dielectrics are attracting increasing attention for electrical energy storage owing to their advantages of mechanical flexibility, corrosion resistance, facile processability, light weight, great reliability, and high operating voltages. However, the dielectric constants of most dielectric polymers are less than 10, which results in low energy densities and limits their applications in electrostatic capacitors for advanced electronics and electrical power systems. Therefore, intensive efforts have been placed on the development of high-energy-density polymer dielectrics. In this perspective, the most recent results on the all-organic polymer dielectrics are summarized, including molecular structure design, polymer blends, and layered structured polymers. The challenges in the field and suggestions for future research on high-energy-density polymer dielectrics are also presented.

Enhanced energy storage density of all-organic fluoropolymer composite dielectric via introducing crosslinked structure

Polymer-based dielectrics have been attracted much attention to flexible energy storage devices due to their rapid charge–discharge rate, flexibility, lightness and compactness. Nevertheless, the energy storage performance of these dielectric polymers was limited by the weak dielectric breakdown properties. Crosslinked structure has been proven efficient to enhance breakdown strength (E_b) and charge–discharge efficiency (η) of polymer film capacitors. However, crosslinked networks usually lead to low electric displacement of dielectric capacitors, which greatly restrict their energy storage density (U_d). In this work, we present a tri-layered composite via layer-by-layer casting technology, where crosslinked polyvinylidene fluoride (c-PVDF) was used as the inter-layer to offer high breakdown strength, and the outer ternary fluoropolymer layers with high dielectric constant could provide high electric displacement. The optimal tri-layered composites exhibit an ultrahigh discharge energy density of 18.3 J cm⁻³ and a discharge efficiency of 60.6% at 550 kV mm⁻¹. This energy density is much higher than that of the PVDF terpolymer and commercially biaxially oriented polypropylene (BOPP, 1–2 J cm⁻³). The simulation results prove that the enhanced energy density originates from the effectively depressed charge transport in crosslinked structure at high applied electric field. Moreover, this work provides a feasible method for developing flexible all-organic high-energy-density composites for polymer capacitors.

High energy density is achieved for all-organic composites by introducing crosslinked structure.

Influence of dipole and intermolecular interaction on the tuning dielectric and energy storage properties of polystyrene-based polymers

A dielectric polymer with high energy density is in high demand in modern electric and electronic systems. The current polymer dielectrics are facing the tradeoff between high energy density and low energy loss. Although many efforts have been devoted to solving the problem by modifying biaxially oriented polypropylene (BOPP), poly(vinylidene fluoride) (PVDF) and glassy polymers, limited success has been achieved. In the present work, we disperse the high polar nitrile units in a low polar polystyrene (PSt) matrix to avoid the strong coupling force among the adjacent polar groups and reduce the relaxation-induced high dielectric loss. In addition, the possible charge transportation offered by phenyl groups could be blocked by the enlarged bandgap. Notably, the induced polarization is established between the nitrile and phenyl groups, which may lead to the copolymer chain being more densely packed. As a result, excellent energy storage performances, including the high energy density and low loss, are achieved in the resultant poly(styrene-co-acrylonitrile) (AS). For instance, AS-4 exhibits a Ue of 11.4 J cm-3 and η of 91% at ambient temperature and 550 MV m-1. Manipulating the dipole polarization in the low polar glassy polymer matrix is verified to be a facile strategy for the design of a high-energy storage dielectric polymer.

Activation of different C–F bonds in fluoropolymers for Cu(0)-mediated single electron transfer radical polymerization

The graft polymerization of MMA initiated from PVDF-based fluoropolymers via single electron transfer controlled radical polymerization (SET-CRP) is reported.

Cellulose/BaTiO3 nanofiber dielectric films with enhanced energy density by interface modification with poly(dopamine)

Flexible electrostatic capacitors have many potential applications in modern electric power systems. In this study, flexible cellulose-based dielectric films were prepared by compositing regenerated cellulose (RC) and one-dimensional BaTiO₃ nanofiber (BTNF) via a simple and environmentally friendly process. To improve compatibility and distributional homogeneity of the fillers/matrix, BTNF was surface modified by dopamine to prepare the poly(dopamine) modified BTNF (PDA@BTNF). The obtained RC/PDA@BTNF composite films (RC-PDA@BTNF) possessed higher dielectric constant and breakdown strength than those of the RC and RC/BTNF composite films. In particular, RC/PDA@BTNF composite films with 2 vol% PDA@BTNF (RC-2PDA@BTNF) exhibited a high discharged energy density of 17.1 J/cm³ at 520 MV/m, which exceeded 40 % compared with that of RC-2BTNF at 460 MV/m. Meanwhile, RC-2PDA@BTNF could continuously work for more than 10,000 times with a high efficiency of 91 %. Furthermore, the composite films could maintain good dielectric properties for a long time when stored in vacuum condition (under 0.3 atm). Therefore, these flexible cellulose-based dielectric materials are promising in the field of novel high-performance film dielectric capacitors.

Re-evaluation of the Energy Density Properties of VDF Ferroelectric Thin-Film Capacitors

Large dielectric constants and small remanent polarization of the relaxor-ferroelectric (RFE) polymers are favored for energy-harvesting applications. Here, the energy harvesting of RFE thin films of vinylidene fluoride (VDF)-based terpolymers were re-evaluated. VDF-based terpolymers with trifluoroethylene (TrFE) and chlorofluoroethylene (CFE), CFE terpolymer, and those with TrFE and chlorotrifluoroethylene were used. Thermally annealed CFE terpolymer exhibited an energy density of 8.3 J cm^-3 and an energy efficiency of 82% at a field of 280 MV m^-1. The high-energy efficiency was related to the narrow bipolar hysteresis of displacement (D)-electric field (E) of the CFE terpolymer film. This narrow D-E hysteresis was a sum of the unipolar hysteresis directed toward the positive electric field region and that toward the negative electric field region, which suggested antiferroelectric-like behavior.

Structural Tailing and Pyroelectric Energy Harvesting of P(VDF-TrFE) and P(VDF-TrFE-CTFE) Ferroelectric Polymer Blends

The copolymer P(VDF-TrFE) is a normal ferroelectric because the bulky TrFE monomer improves its crystalline chain structure, while the terpolymer P(VDF-TrFE-CTFE) is a relaxor ferroelectric because the third monomer CTFE makes it amorphous. Herein, in order to induce a crystalline beta phase in the terpolymer, we blended a small amount of crystalline P(VDF-TrFE) into P(VDF-TrFE-CTFE) and investigated the effect of blending on the pyroelectric energy harvesting (PyEH) properties. The polarization-electric field hysteresis loops at different temperatures and energy densities were investigated. The PyEH energy density (N _D) is compared with the electrical energy density (U _E). The U _E and N _D at the ferroelectric-paraelectric transition temperature for the χ = 0.1 blend are reported as 3.18 and 5.04 J/cm³, respectively, which are higher than the other polymer blends. Interestingly, the N _D of the χ = 0.9 blend is found to be 3.44 J/cm³ when operated at lower and higher temperatures, that is, at T _L = 25 °C and T _H = 40 °C, respectively, which is the highest possible energy density at the lowest possible transition temperature for the polymer blends.

The Dependence of Acoustic Emission Performance on the Crystal Structures, Dielectric, Ferroelectric, and Piezoelectric Properties of the P(VDF-TrFE) Sensors

To clarify the influence of various molar concentrations of vinylidene fluoride (VDF) on the piezoelectric and acoustic emission (AE) reception performances of poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE)] sensors, we systematically investigated the crystal structures and the dielectric and ferroelectric properties of P(VDF-TrFE) films with different compositions of VDF and TrFE monomers and found that low proportion (<30 mol%) TrFE as a wedge inserted into molecular chains of P(VDF-TrFE) will not only improve the fraction of regular β -phase crystal grains but also decrease the dielectric constant ( ε_r ) of these copolymers, which favors the piezoelectric voltage coefficient ( g₃₃ ) of this P(VDF-TrFE) film. As such, a considerable remanent electric polarization ( [Formula: see text]/cm²) under 200 MV/m and a large piezoelectric coefficient ( d ₃₃  ∼ -25 pC/N) are obtained in P(VDF-TrFE) 80/20-mol% films. It is worth noting that a sensor made from P(VDF-TrFE) 80/20 mol% shows an attractive AE reception property of approximately 84 dB, a high signal voltage of above 10 mV from time-domain analysis, and a large signal voltage of above 4 mV from frequency-domain analysis, which are close to standard lead zirconate titanate (PZT) sensors. Considering its unique characters of flexibility, no required stretching, easily shaped, having high thermal Faille temperatures ( [Formula: see text]), etc., P(VDF-TrFE) piezoelectric film is considered a promising material for sensors, actuators, and energy transfer units.

Enhanced piezoelectric and acoustic performances of poly(vinylidene fluoride-trifluoroethylene) films for hydroacoustic applications

Concerning the study of flexible piezoelectric devices, both scholars and engineers propose that poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) shows more merits than oriented polyvinylidene fluoride (OPVDF) in terms of dielectric, piezoelectric, mechanic-electric, acoustic emission reception performances, etc. Thus, in this study, to clarify the differences between the two types of polymers on their ferroelectric and piezoelectric behaviors, we systematically investigated samples to analyze their molecular structures and phase structures, and to compare their dielectric properties and acoustic emission reception performances. It was found that the wedge effect of TrFE, P(VDF-TrFE), possesses higher regular β phase crystal grains, which are easier to order along the electric field and possess more ordered static charge distribution than that of OPVDF. Consequently, a considerable saturated electric polarization (Pm ∼ 15 μC cm-2 under 225 MV m-1), a large piezoelectric coefficient (d33 ∼ -21.5 pC N-1) and a low coercive electric field (Ec ∼ 50 MV m-1) were obtained in the P(VDF-TrFE) films. It is worth noting that P(VDF-TrFE) shows a more stable d33 piezoelectric response (up to 120 °C) than that of the OPVDF. Additionally, the P(VDF-TrFE) piezoelectric films exhibit a sensitive acoustic emission reception property at approximately 70 dB and an extensive response frequency range from 10 to 100 kHz. These combined properties demonstrate that P(VDF-TrFE) piezoelectric films are a promising material for flexible and easily shaped electronic devices, including hydroacoustic sensors, actuators, and energy transfer units.

Grafting PMMA onto P(VDF-TrFE) by CF Activation via a Cu(0) Mediated Controlled Radical Polymerization Process

In the present work, poly(methyl methacrylate) (PMMA) is successfully grafted onto poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) side chains via directly activated CF bonds using Cu(0)/2,2'-bipyridine as catalyst. The reaction mechanism and the initiating sites can be confirmed by the structure of the graft copolymer. The graft copolymerization exhibits first-order kinetics, and reaction conditions can affect the chemical composition of the graft copolymer, including reaction time, reaction temperature, solvents, the amount of catalyst, and monomer. The introduction of rigid PMMA side chains onto P(VDF-TrFE) can effectively tune the displacement-electric field hysteresis behaviors of P(VDF-TrFE) from normal ferroelectric to anti-ferroelectric, even linear-like dielectric, under high electric field, resulting in dramatically reduced energy loss while maintaining the discharged energy density. This work may provide an effective strategy to introduce functional groups into P(VDF-TrFE) copolymer via activation of CF bonds.

High-Performance TiO₂ Nanotubes/Poly(aryl ether sulfone) Hybrid Self-Cleaning Anti-Fouling Ultrafiltration Membranes

A series of novel self-cleaning hybrid photocatalytic ultrafiltration (UF) membranes were fabricated to separate polyacrylamide, which is widely used as a commercial flocculant. To maximize the self-cleaning and anti-fouling properties of hybrid membranes, high surface area TiO₂ nanotubes (TNTs) with excellent photocatalytic activity were homogeneously introduced into a poly(aryl ether sulfone) matrix by chemical bonds. The chemical structure, micromorphology, hydrophilicity, separation efficiency, fouling behavior, and self-cleaning property of the prepared hybrid membranes were well characterized and evaluated. For the optimal sample, the flux recovery ratio increased from ~40% to ~80% after simulated sunlight irradiation for 20 min, which was attributable to the homogeneous dispersion and efficient photocatalytic degradation ability of TNTs. Furthermore, the intelligent fabrication strategy enhanced the anti-aging ability of the hybrid membranes via the use of a fluorine-containing poly matrix. This work provided new insight into the fabrication of high-performance self-cleaning inorganic/organic hybrid membranes.

Metal–Organic Frameworks (MOFs) as Potential Hybrid Ferroelectric Materials

This chapter presents new findings of intrinsic and induced ferroelectricity in Metal–Organic Frameworks (MOFs) with a polar system, capable of forming an electronic structure in an asymmetric lattice. Multiple experimental techniques and simulation methods are reviewed in detail. The characteristics of ferroelectrics such as discontinuity in temperature-dependent dielectric constant, polarization hysteresis loops, etc. have been observed from several MOF large crystals and crystalline powders. A relationship between polarization and bond polarity for MOFs has been established. In addition, we emphasize the significance of mechanical strength of MOFs in real applications. This chapter reviews MOF materials for energy storage and utilization, aiming to provide an insight into the design of novel MOF-based ferroelectrics.

Tuning the dielectric and energy storage properties of polystyrene-based polymer dielectric by manipulating dipoles and their polarizing behavior

MMA units in MS improve energy storage properties by hindering conductivity pathway derived form PSt.

Regulating Dielectric and Ferroelectric Properties of Poly(vinylidene fluoride-trifluoroethylene) with Inner CH=CH Bonds

Poly(vinylidene fluoride) (PVDF) based ferroelectric polymers have attracted considerable attention both academically and industrially due to their tunable ferroelectric properties. By pinning the conformation of the polymer chain and the ferroelectric phase physically or chemically, the ferroelectric behaviors of PVDF based polymers could be finely turned from normal ferroelectric into relaxor ferroelectric, anti-ferroelectric like, and even linear dielectric. Besides high energy electron irradiation and chemical copolymerization with the bulky monomers, in this work, an alternative strategy is presented to regulate the dielectric and ferroelectric performances of PVDF based ferroelectric polymer for the first time. CH=CH bonds with the desired content are inserted by a controlled dehydrofluorination reaction into a poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) copolymer (TrFE refers to trifluoroethylene) synthesized from the hydrogenation of P(VDF-CTFE) (CTFE refers to chlorothrifluoroethylene). The influence of the CH=CH bonds along with the fabrication conditions on the crystallization and ferroelectric relaxation of the resultant copolymers (referred to P(VDF-TrFE-DB)) was carefully characterized and discussed. The nonrotatable CH=CH bonds result in depressed dielectric and ferroelectric performances in the as-cast films by confining the orientation of ferroelectric grains in P(VDF-TrFE). The normal ferroelectric performance of P(VDF-TrFE) is turned into anti-ferroelectric like behavior in the resultant P(VDF-TrFE-DB). The cleavage of CH=CH bonds is responsible for the recovery of the ferroelectric behavior in the annealed samples. Uniaxial stretching favors the alignment of the polymer chain and ferroelectric domains, which may address the further regulated ferroelectric characters in the stretched samples.

Probing nanoscale functionalities of metal-organic framework nanocrystals

Experimental investigation of functional properties of metal-organic frameworks (MOFs) at nanoscale precision is challenging and rarely reported. In this study, we report the piezo- and ferroelectric properties of NUS-6 MOF nanocrystals using dual AC resonance tracking piezoresponse force microscopy and piezoresponse force spectroscopy for the first time. Both NUS-6-(Hf) and NUS-6-(Zr) nanocrystals displayed anomalous piezoelectricity with the calculated piezoelectric coefficient d_zz constants of 2.0-3.5 pm V^-1 and 1.5-2.5 pm V^-1, respectively. Moreover, NUS-6-(Hf) showed much better polarization-switching behaviors (ferroelectricity) than NUS-6-(Zr), featured by very low coercive biases in the ferroelectric hysteresis (PR) loop. Furthermore, elasticity and thermal stability of the NUS-6 nanocrystals have been presented. The results have opened a realm of probing piezo- and ferro-electric properties as well as mechanical properties of MOF nanocrystals, which are promising materials for applications in integrated microelectromechanical systems (MEMS).

ALD preparation of high-k HfO2 thin films with enhanced energy density and efficient electrostatic energy storage

The energy density and energy efficiency deteriorate slightly from room temperature to 150 °C.

Inserting –CHCH– into P(VDF-TrFE) by C–F activation mediated with Cu(0) in a controlled atom transfer radical elimination process

A controlled single electron transfer radical elimination (SET-RE) reaction has been successfully developed to introduce CHCH bonds into poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)).

Influence of Dielectric Layers on Charge Transport through Diketopyrrolopyrrole-Containing Polymer Films: Dielectric Polarizability vs Capacitance

Field-effect mobility of a polymer semiconductor film is known to be enhanced when the gate dielectric interfacing with the film is weakly polarizable. Accordingly, gate dielectrics with lower dielectric constant (k) are preferred for attaining polymer field-effect transistors (PFETs) with larger mobilities. At the same time, it is also known that inducing more charge carriers into the polymer semiconductor films helps in enhancing their field-effect mobility, because the large number of traps presented in such a disorder system can be compensated substantially. In this sense, it may seem that employing higher k dielectrics is rather beneficial because capacitance is proportional to the dielectric constant. This, however, contradicts with the statement above. In this study, we compare the impact of the two, i.e., the polarizability and the capacitance of the gate dielectric, on the transport properties of poly[(diketopyrrolopyrrole)-alt-(2,2'-(1,4-phenylene)bisthiophene)] (PDPPTPT) semiconductor layers in an FET architecture. For the study, three different dielectric layers were employed: fluorinated organic CYTOP (k = ∼2), poly(methyl methacrylate) (k = ∼4), and relaxor ferroelectric poly(vinylidene fluoride-trifluoroethylene-chlorotrifluoroethylene) (k = ∼60). The beneficial influence of attaining more carriers in the PDPPTPT films on their charge transport properties was consistently observed from all three systems. However, the more dominant factor determining the large carrier mobility was the low polarizability of the gate dielectric rather than its large capacitance; field-effect mobilities of PDPPTPT films were always larger when lower k dielectric was employed than when higher k dielectric was used. The higher mobilities obtained when using lower k dielectrics could be attributed to the suppressed distribution of the density of localized states (DOS) near the transport level and to the resulting enhanced electronic coupling between the macromolecules.

The Dependence of Dielectric and Ferroelectric Properties on Crystal Phase Structures of the Hydrogenized P(VDF-TrFE) Films With Different Thermal Processing

Different thermal treatments were used to obtain various crystal structures of hydrogenated poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE)] films synthesized by an atom transfer radical chain transfer and controllable elimination reaction route. After analyzing the results of X-ray diffraction and differential scanning calorimeter, we found that these P(VDF-TrFE) samples possessed mixed crystal phases of α , β , and γ with various compositions depending on the TrFE content and processing temperature, and this characteristic was also demonstrated by the dielectric temperature curves. After polarizing the P(VDF-TrFE) samples at different electric fields, the effect of crystal structure on their ferroelectric and piezoelectric properties was illustrated and conformed by field emission scanning electronic microscopy morphology, which was found that large TrFE content and high temperature processing were responsible for the large remnant polarization. As a result, the annealed P(VDF-TrFE) 80/20 mol% possessed a high remnant polarization of [Formula: see text]/cm², a large piezoelectric value ( d₃₃ = -25 pC/N), and a favorable electromechanical coupling factor ( k_t = 0.26 ), providing a reliable method for the structure design and sample fabrication of this kind of copolymer aimed at the applications in piezoelectric sensors and actuators.

Recent Progress on Ferroelectric Polymer-Based Nanocomposites for High Energy Density Capacitors: Synthesis, Dielectric Properties, and Future Aspects

Dielectric polymer nanocomposites are rapidly emerging as novel materials for a number of advanced engineering applications. In this Review, we present a comprehensive review of the use of ferroelectric polymers, especially PVDF and PVDF-based copolymers/blends as potential components in dielectric nanocomposite materials for high energy density capacitor applications. Various parameters like dielectric constant, dielectric loss, breakdown strength, energy density, and flexibility of the polymer nanocomposites have been thoroughly investigated. Fillers with different shapes have been found to cause significant variation in the physical and electrical properties. Generally, one-dimensional and two-dimensional nanofillers with large aspect ratios provide enhanced flexibility versus zero-dimensional fillers. Surface modification of nanomaterials as well as polymers adds flavor to the dielectric properties of the resulting nanocomposites. Nowadays, three-phase nanocomposites with either combination of fillers or polymer matrix help in further improving the dielectric properties as compared to two-phase nanocomposites. Recent research has been focused on altering the dielectric properties of different materials while also maintaining their superior flexibility. Flexible polymer nanocomposites are the best candidates for application in various fields. However, certain challenges still present, which can be solved only by extensive research in this field.

Synthesis of poly(methyl methacrylate–methallyl alcohol) via controllable partial hydrogenation of poly(methyl methacrylate) towards high pulse energy storage capacitor application

The first synthesis of poly(methyl methacrylate–methallyl alcohol) (P(MMA–MAA)) copolymersviaan indirect polymerization process involving the partial hydrogenation of PMMA with promising energy storage capability has been reported.

High-field antiferroelectric-like behavior in uniaxially stretched poly(vinylidene fluoride-trifluoroethylene-chlorotrifluoroethylene)-grafted-poly(methyl methacrylate) films with high energy density

The antiferroelectric-like behavior could be retained up to 675 MV m⁻¹ with a discharged energy density of 23.3 J cm⁻³ because of the confinement of rigid PMMA segment onto the ferroelectric relaxation of P(VDF-TrFE-CTFE) and the high breakdown strength.

Solvent-dependent properties of poly(vinylidene fluoride) monolayers at the air-water interface

The present work addresses the solvent-dependent properties of Langmuir films of poly(vinylidene fluoride) (PVDF) and amphiphilic poly(N-dodecylacrylamide) (pDDA) at different mixing ratios. After introducing pDDA nanosheets, PVDF Langmuir films obtain a tremendously enhanced modulus as well as high transfer ratios using the vertical dipping method caused by the support of the pDDA two-dimensional hydrogen bonding network. Brewster angle microscopy (BAM) was used to investigate PVDF monolayers at the air-water interface in situ. Spreading from different solvents, the PVDF molecules take completely different aggregation states at the air-water interface. The PVDF molecules aggregate to become large domains when spread from N-methyl-2-pyrrolidone (NMP). However, the volatile and low-polarity methylethyl ketone (MEK) made the PVDF molecules more dispersive on the water surface. This study also discovers a versatile crystallization control of PVDF homopolymer from complete β phase (NMP) to complete α phase (MEK) at the air-water interface, thereby eliciting useful information for further manipulation of film morphologies and film applications.

Terthiophene-containing copolymers and homopolymer blends as high-performance dielectric materials

This work explores the dielectric and polarization properties of block copolymers and homopolymer blends containing a terthiophene-rich, electronically polarized block (PTTEMA) and an insulating polystyrene block (PS). PTTEMA-b-PS block copolymers were synthesized by reverse addition-fragmentation chain transfer (RAFT) polymerization, and PTTEMA/PS homopolymer blends with the same PTTEMA weight percentages were produced by solution blending. DSC and XRD characterization show that crystallinity increases with PTTEMA content, indicating the presence of terthiophene-rich crystalline domains. Under an applied electric field, these domains are electronically polarized, but the insulating PS block inhibits current leakage, resulting in enhanced dielectric properties. Impedance measurements show that relative permittivity increases with PTTEMA content. The permittivity values are higher in PTTEMA-b-PS copolymers with moderate PTTEMA content due to the ability of the PS block to inhibit PTTEMA association, resulting in a higher density of isolated, terthiophene-rich polarizable domains. Freestanding PTTEMA/PS blend films containing up to 40 wt % PTTEMA have almost 40% greater recoverable energy density compared to pure PS films polarized to the same electric field strength.

Preparation and dielectric properties of cyanoethyl cellulose/BaTiO3 flexible nanocomposite films

Cyanoethyl cellulose-based high dielectric permittivity nanocomposite films were successfully prepared for the first time by introducing BaTiO₃ into cyanoethyl cellulose.

Ferro- and piezo-electric properties of a poly(vinyl fluoride) film with high ferro- to para-electric phase transition temperature

Excellent ferro- and piezo-electricity is observed for the first time in poly(vinyl fluoride) with a ferro- to para-electric transition at 168 °C, a coercive electric field of 120 MV m⁻¹ and a relatively large piezoelectric coefficient of −11 pC N⁻¹.

A crystal phase transition and its effect on the dielectric properties of a hydrogenated P(VDF-co-TrFE) with low TrFE molar content

The crystal phase transition and electric properties of hydrogenated P(VDF-co-TrFE) with low TrFE molar content were characterized with the aid of high electric filed, which is different from traditional P(VDF-co-TrFE) in crystal phase diagram.

High energy and power density capacitors from solution-processed ternary ferroelectric polymer nanocomposites

Concurrent improvements in dielectric constant and breakdown strength are attained in a solution-processed ternary ferroelectric polymer nanocomposite incorporated with two-dimensional boron nitride nanosheets and zero-dimensional barium titanate nanoparticles that synergistically interact to enable a remarkable energy-storage capability, including large discharged energy density, high charge-discharge efficiency, and great power density.

Flexible nanodielectric materials with high permittivity for power energy storage

Study of flexible nanodielectric materials (FNDMs) with high permittivity is one of the most active academic research areas in advanced functional materials. FNDMs with excellent dielectric properties are demonstrated to show great promise as energy-storage dielectric layers in high-performance capacitors. These materials, in common, consist of nanoscale particles dispersed into a flexible polymer matrix so that both the physical/chemical characteristics of the nanoparticles and the interaction between the nanoparticles and the polymers have crucial effects on the microstructures and final properties. This review first outlines the crucial issues in the nanodielectric field and then focuses on recent remarkable research developments in the fabrication of FNDMs with special constitutents, molecular structures, and microstructures. Possible reasons for several persistent issues are analyzed and the general strategies to realize FNDMs with excellent integral properties are summarized. The review further highlights some exciting examples of these FNDMs for power-energy-storage applications.