Thermal, tensile and rheological properties of dynamically cross-linked organoclay filled poly(ethylene-co-vinyl acetate)/acrylonitrile-butadiene rubber nanocomposites: Effect of peroxide content

Enhancement of Chloroprene/Natural/Butadiene Rubber Nanocomposite Properties Using Organoclays and Their Combination with Carbon Black as Fillers

Organoclay nanoparticles (Cloisite^® C10A, Cloisite^® C15) and their combination with carbon black (N330) were studied as fillers in chloroprene/natural/butadiene rubber blends to prepare nanocomposites. The effect of filler type and load on the physical mechanical properties of nanocomposites was determined and correlated with its structure, compatibility and cure properties using Fourier Transformed Infrared (FT-IR), X-ray Diffraction (XRD), Thermogravimetric Analysis (TGA) and rheometric analysis. Physical mechanical properties were improved by organoclays at 5–7 phr. Nanocomposites with organoclays exhibited a remarkable increase up to 46% in abrasion resistance. The improvement in properties was attributed to good organoclay dispersion in the rubber matrix and to the compatibility between them and the chloroprene rubber. Carbon black at a 40 phr load was not the optimal concentration to interact with organoclays. The present study confirmed that organoclays can be a reinforcing filler for high performance applications in rubber nanocomposites.

Structure Evolution of Epoxidized Natural Rubber (ENR) in the Melt State by Time-Resolved Mechanical Spectroscopy

In this work, time-resolved mechanical spectroscopy (TRMS) was used to accurately characterize the rheological behavior of an epoxidized natural rubber (ENR) containing 25 mol% of epoxy groups. Conventional rheological tests are not suitable to characterize with accuracy the frequency-dependent linear viscoelastic behavior of materials, such as ENR, in a transient configurational state. For this reason, TRMS was used to determine the true rheological behavior of ENR, as well as to gain some insights into the changes of its macromolecular architecture under the dynamic conditions experienced during the measurements. The constructed master curves for the moduli revealed a gradual transition of the ENR rheological state from liquid-like to solid-like through the formation of an “elastic gel” throughout the bulk of the polymer. Furthermore, the evolution of the stress relaxation modulus revealed a slow relaxation mechanism, resulting from thermally activated reactions in the molten state attributed to the formation of crosslinks. Finally, the crosslink density evolution was estimated from the TRMS data and compared with results derived from equilibrium solvent-swelling measurements. These demonstrated the accuracy of the TRMS data in the prediction of the structural changes that can take place in polymers during processing.