A UV-induced mutant of Cryptococcus flavus GB-1 with increased production of a biodegradable plastic-degrading enzyme

Enzymatic degradation of polylactic acid (PLA)

Environmental concerns arising from the increasing use of polluting plastics highlight polylactic acid (PLA) as a promising eco-friendly alternative. PLA is a biodegradable polyester that can be produced through the fermentation of renewable resources. Together with its excellent properties, suitable for a wide range of applications, the use of PLA has increased significantly over the years and is expected to further grow. However, insufficient degradability under natural conditions emphasizes the need for the exploration of biodegradation mechanisms, intending to develop more efficient techniques for waste disposal and recycling or upcycling. Biodegradation occurs through the secretion of depolymerizing enzymes, mainly proteases, lipases, cutinases, and esterases, by various microorganisms. This review focuses on the enzymatic degradation of PLA and presents different enzymes that were isolated and purified from natural PLA-degrading microorganisms, or recombinantly expressed. The review depicts the main characteristics of the enzymes, including recent advances and analytical methods used to evaluate enantiopurity and depolymerizing activity. While complete degradation of solid PLA particles is still difficult to achieve, future research and improvement of enzyme properties may provide an avenue for the development of advanced procedures for PLA degradation and upcycling, utilizing its building blocks for further applications as envisaged by circular economy principles. KEY POINTS: • Enzymes can be promisingly utilized for PLA upcycling. • Natural and recombinant PLA depolymerases and methods for activity evaluation are summarized. • Approaches to improve enzymatic degradation of PLA are discussed.

Soil Microplastic Pollution and Microbial Breeding Techniques for Green Degradation: A Review

Microplastics (MPs), found in many places around the world, are thought to be more detrimental than other forms of plastics. At present, physical, chemical, and biological methods are being used to break down MPs. Compared with physical and chemical methods, biodegradation methods have been extensively studied by scholars because of their advantages of greenness and sustainability. There have been numerous reports in recent years summarizing the microorganisms capable of degrading MPs. However, there is a noticeable absence of a systematic summary on the technology for breeding strains that can degrade MPs. This paper summarizes the strain-breeding technology of MP-degrading strains for the first time in a systematic way, which provides a new idea for the breeding of efficient MP-degrading strains. Meanwhile, potential techniques for breeding bacteria that can degrade MPs are proposed, providing a new direction for selecting and breeding MP-degrading bacteria in the future. In addition, this paper reviews the sources and pollution status of soil MPs, discusses the current challenges related to the biodegradation of MPs, and emphasizes the safety of MP biodegradation.

Can bioplastics always offer a truly sustainable alternative to fossil-based plastics?

Bioplastics, comprised of bio-based and/or biodegradable polymers, have the potential to play a crucial role in the transition towards a sustainable circular economy. The use of biodegradable polymers not only leads to reduced greenhouse gas emissions but also might address the problem of plastic waste persisting in the environment, especially when removal is challenging. Nevertheless, biodegradable plastics should not be considered as substitutes for proper waste management practices, given that their biodegradability strongly depends on environmental conditions. Among the challenges hindering the sustainable implementation of bioplastics in the market, the development of effective downstream recycling routes is imperative, given the increasing production volumes of these materials. Here, we discuss about the most advisable end-of-life scenarios for bioplastics. Various recycling strategies, including mechanical, chemical or biological (both enzymatic and microbial) approaches, should be considered. Employing enzymes as biocatalysts emerges as a more selective and environmentally friendly alternative to chemical recycling, allowing the production of new bioplastics and added value and high-quality products. Other pending concerns for industrial implementation of bioplastics include misinformation among end users, the lack of a standardised bioplastic labelling, unclear life cycle assessment guidelines and the need for higher financial investments. Although further research and development efforts are essential to foster the sustainable and widespread application of bioplastics, significant strides have already been made in this direction.

Biodegradation of low-density polyethylene by plasma-activated Bacillus strain

Plastic biodegradation by microorganisms is an eco-friendly and sustainable method without any ramifications. Herein, we used a cultivation method and 16S rRNA sequencing to screen bacteria that can efficiently colonize and degrade low-density polyethylene (LDPE) from various plastic wastes. We identified Bacillus safensis BS-10L through whole-genome sequencing analysis and verified its LDPE-degradation ability. However, the decomposition mechanism of the isolated bacteria was unclear and the decomposition efficiency was insufficient, so low-temperature plasma was used to increase the decomposition efficiency of the bacteria. The population and viability of bacteria treated with cold plasma increased. Plasma-activated bacteria could induce cracks, holes, and roughness on the surface of LDPE films over 90 days, and over 30 days; the LDPE film lost 13.40 ± 0.013% and 27.78 ± 0.014% of its mass by BS-10L and plasma-treated BS-10L, respectively. Fourier-transform infrared spectroscopic analysis identified new peaks of the C=O and C-O groups in the plasma-treated LDPE film, exhibiting high transmittance in the LDPE film that was inoculated with bacteria. X-ray photoelectron spectroscopic analysis showed that C-O bonds were generated by BS-10L strain, and relatively strong C=O bonds were generated in the film inoculated with plasma-treated BS-10L strain. Plasma treatment increased the colonization of the BS-10L strain and changed the chemical bonding of the LDPE film, suggesting that plasma-activated BS-10L could accelerate decomposition by oxidation by increasing the carbonyl group of the PE film. Therefore, plasma technology may be effective for enhancing the plastic-degrading ability of microorganisms.

Identification of a plastic-degrading enzyme from Cryptococcus nemorosus and its use in self-degradable plastics

For decades, plastic waste management has been one of the major ecological challenges of our society. Despite the introduction of biodegradable alternatives such as polylactic acid (PLA), their beneficial environmental impact is limited by the requirement of specific compost facility as biodegradation of PLA in natural environment occurs at a very slow rate. In this work, a plastic-degrading enzyme was utilized to facilitate degradation process. Genomic and proteomic tools were employed to identify a new biodegradable plastic-degrading enzyme from Cryptococcus nemorosus TBRC2959. The new enzyme, Cr14CLE, functions optimally under mild conditions with temperature range of 30 to 40 °C and suffers no significant loss of enzymatic activity at pH ranging from 6 to 8. In addition to PLA, Cr14CLE is capable to degrade other types of biodegradable plastic such as polybutylene succinate (PBS) and polybutylene adipate terephthalate (PBAT) as well as composite bioplastic. Applications of Cr14CLE have been demonstrated through the preparation of enzyme-coated PLA film and laminated PLA film with enzyme layer. PLA films prepared by both approaches exhibited capability to self-degrade in water. KEY POINTS: • Novel plastic-degrading enzyme (Cr14CLE) was identified and characterized. • Cr14CLE can degrade multiple types of biodegradable plastics under mild conditions. • Applications of Cr14CLE on self-degradable plastic were demonstrated.

Potential effects of micro- and nanoplastics on phyllosphere microorganisms and their evolutionary and ecological responses

Plastic pollution is among the most urgent environmental and social challenges of the 21st century, and their influxes in the environment have altered critical growth drivers in all biomes, attracting global concerns. In particular, the consequences of microplastics on plants and their associated soil microorganisms have gained a large audience. On the contrary, how microplastics and nanoplastics (M/NPs) may influence the plant-associated microorganisms in the phyllosphere (i.e., the aboveground portion of plants) is nearly unknown. We, therefore, summarize evidence that may potentially connect M/NPs, plants, and phyllosphere microorganisms based on studies on other analogous contaminants such as heavy metals, pesticides, and nanoparticles. We show seven pathways that may link M/NPs into the phyllosphere environment, and provide a conceptual framework explaining the direct and indirect (soil legacy) effects of M/NPs on phyllosphere microbial communities. We also discuss the adaptive evolutionary and ecological responses, such as acquiring novel resistance genes via horizontal gene transfer and microbial degradation of plastics of the phyllosphere microbial communities, to M/NPs-induced threats. Finally, we highlight the global consequences (e.g., disruption of ecosystem biogeochemical cycling and impaired host-pathogen defense chemistry that can lead to reduced agricultural productivity) of altered plant-microbiome interactions in the phyllosphere in the context of a predicted surge of plastic production and conclude with pending questions for future research priorities. In conclusion, M/NPs are very likely to produce significant effects on phyllosphere microorganisms and mediate their evolutionary and ecological responses.

Enzymes' Power for Plastics Degradation

Plastics are everywhere in our modern way of living, and their production keeps increasing every year, causing major environmental concerns. Nowadays, the end-of-life management involves accumulation in landfills, incineration, and recycling to a lower extent. This ecological threat to the environment is inspiring alternative bio-based solutions for plastic waste treatment and recycling toward a circular economy. Over the past decade, considerable efforts have been made to degrade commodity plastics using biocatalytic approaches. Here, we provide a comprehensive review on the recent advances in enzyme-based biocatalysis and in the design of related biocatalytic processes to recycle or upcycle commodity plastics, including polyesters, polyamides, polyurethanes, and polyolefins. We also discuss scope and limitations, challenges, and opportunities of this field of research. An important message from this review is that polymer-assimilating enzymes are very likely part of the solution to reaching a circular plastic economy.

Accelerated degradation of plastic products via yeast enzyme treatment

Biodegradable plastics can solve the problem of unwanted plastics accumulating in the environment if they can be given the contradictory properties of durability in use and rapid degradation after use. Commercially available agricultural biodegradable mulch films are made from formulations containing polybutylene adipate-co-terephthalate (PBAT) to provide mechanical and UV resistance during the growing season. Although used films are ploughed into the soil using a tiller to promote decomposition, it is difficult if they remain durable. We showed that an enzyme produced by the leaf surface yeast Pseudozyma antarctica (PaE) degrades PBAT-containing films. In laboratory studies, PaE randomly cleaved the PBAT polymer chain and induced erosion of the film surface. In the field, commercial biodegradable films containing PBAT placed on ridges were weakened in both the warm and cold seasons by spraying the culture filtrate of P. antarctica. After the field was ploughed the next day, the size and total weight of residual film fragments decreased significantly (p < 0.05). Durable biodegradable plastics used in the field are degraded using PaE treatment and are broken down into small fragments by the plough. The resultant degradation products can then be more readily assimilated by many soil microorganisms.

Biodegradation of Biodegradable Polymers in Mesophilic Aerobic Environments

Finding alternatives to diminish plastic pollution has become one of the main challenges of modern life. A few alternatives have gained potential for a shift toward a more circular and sustainable relationship with plastics. Biodegradable polymers derived from bio- and fossil-based sources have emerged as one feasible alternative to overcome inconveniences associated with the use and disposal of non-biodegradable polymers. The biodegradation process depends on the environment's factors, microorganisms and associated enzymes, and the polymer properties, resulting in a plethora of parameters that create a complex process whereby biodegradation times and rates can vary immensely. This review aims to provide a background and a comprehensive, systematic, and critical overview of this complex process with a special focus on the mesophilic range. Activity toward depolymerization by extracellular enzymes, biofilm effect on the dynamic of the degradation process, CO2 evolution evaluating the extent of biodegradation, and metabolic pathways are discussed. Remarks and perspectives for potential future research are provided with a focus on the current knowledge gaps if the goal is to minimize the persistence of plastics across environments. Innovative approaches such as the addition of specific compounds to trigger depolymerization under particular conditions, biostimulation, bioaugmentation, and the addition of natural and/or modified enzymes are state-of-the-art methods that need faster development. Furthermore, methods must be connected to standards and techniques that fully track the biodegradation process. More transdisciplinary research within areas of polymer chemistry/processing and microbiology/biochemistry is needed.

A novel global transcriptional perturbation target identified by forward genetics reprograms Vibrio natriegens for improving recombinant protein production

Vibrio natriegens is known to be the fastest-growing free-living bacterium with the potential to be a novel protein expression system other than Escherichia coli. Seven sampled genes of interest (GOIs) encoding biocatalyst enzymes, including Ochrobactrum anthropi-derived ω-transaminase (OATA), were strongly expressed in E. coli but weakly in V. natriegens using the pET expression system. In this study, we fused the C-terminal of OATA with green fluorescent protein (GFP) and obtained V. natriegens mutants that could increase both protein yield and enzyme activity of OATA as well as the other three GOIs by ultraviolet mutagenesis, fluorescence-activated cell sorting (FACS), and OATA colorimetric assay. Furthermore, next-generation sequencing and strain reconstruction revealed that the Y457 variants in the conserved site of endogenous RNA polymerase (RNAP) β' subunit rpoC are responsible for the increase in recombinant protein yield. We speculated that the mutation of rpoC Y457 may reprogram V. natriegens's innate gene transcription, thereby increasing the copy number of pET plasmids and soluble protein yield of certain GOIs. The increase in GOI expression may partly be attributed to the increase in copy number. In conclusion, GOI-GFP fusion combined with FACS is a powerful tool of forward genetics that can be used to obtain a superior expression chassis. If more high-expression-related targets are found for more GOIs, it would make the construction of next-generation protein expression chassis more time-saving.

Cutinase-like biodegradable plastic-degrading enzymes from phylloplane yeasts have cutinase activity

Phylloplane yeast genera Pseudozyma and Cryptococcus secrete biodegradable plastic (BP)-degrading enzymes, termed cutinase-like enzymes (CLEs). Although CLEs contain highly conserved catalytic sites, the whole protein exhibits ≤30% amino acid sequence homology with cutinase. In this study, we analyzed whether CLEs exhibit cutinase activity. Seventeen Cryptococcus magnus strains, which degrade BP at 15 °C, were isolated from leaves and identified the DNA sequence of the CLE in one of the strains. Cutin was prepared from tomato leaves and treated with CLEs from 3 Cryptococcus species (C. magnus, Cryptococcus flavus, and Cryptococcus laurentii) and Pseudozyma antarctia (PaE). A typical cutin monomer, 10,16-dihydroxyhexadecanoic acid, was detected in extracts of the reaction solution via gas chromatography-mass spectrometry, showing that cutin was indeed degraded by CLEs. In addition to the aforementioned monomer, separation analysis via thin-layer chromatography detected high-molecular-weight products resulting from the breakdown of cutin by PaE, indicating that PaE acts as an endo-type enzyme.

The phylloplane yeast Pseudozyma: a rich potential for biotechnology

Basidiomycetous yeast Pseudozyma strains are often isolated from leaf surfaces. Here, we describe the sources of Pseudozyma yeasts and their useful secreted products, including enzymes and biosurfactants. We then outline the life of Pseudozyma on the leaf surface and introduce studies to verify ecological functions of their useful products. In addition, the function of Pseudozyma in maintaining the health of plants is briefly explained. Finally, the gene manipulation techniques necessary for future research and development of technological applications of Pseudozyma are described.

Pullulan production from synthetic medium by a new mutant of Aureobasidium pullulans

Pullulan with different molecular-weight could be applied in various fields. A UV-induced mutagenesis Aureobasidium pullulans UVMU6-1 was obtained from the strain A. pullulans CGMCC3.933 for the production of low-molecular-weight pullulan. First, the obtained polysaccharide from A. pullulans UVMU6-1 was purified and identified to be pullulan with thin-layer chromatography, Fourier transform infrared, and nuclear magnetic resonance. Then, culture medium and conditions for this strain were optimized by flask fermentation. Based on the optimized medium and culture conditions (pH 4, addition of 4 g/L Tween 80 for 96 hr of cultivation), continuously fermentation was performed. The highest pullulan production and dry biomass was 109 and 125 g/L after fermentation for 114 hr, respectively. The average productivity was about 1 g/L/hr, which was intensively higher than the previous reported. This study would lay foundations for the industrial production of pullulan.

Biodegradable Plastic-degrading Activity of Various Species of Paraphoma

The fungal strain B47-9, isolated from barley, was previously selected as an effective degrader of various biodegradable plastic (BP) films such as poly(butylene succinate-co-adipate) (PBSA) and poly(butylene succinate) (PBS). The strain has not been identified based on mycological methods because it does not form fruiting bodies, which are the key to morphological identification. Here, we performed molecular phylogenetic analyses of the nuclear ribosomal RNA gene regions and their internal transcribed spacer region of B47-9 and related fungi. The results suggest that B47-9 is closely related to the genus Paraphoma. Investigation of the abilities of six strains belonging to the genus Paraphoma to degrade BPs indicated that all strains could degrade PBSA and PBS films to varying degrees. Based on our approach, we conclude that strain B47-9 is a species belonging to the genus Paraphoma.

Application of Chitinous Materials in Production and Purification of a Poly(l-lactic acid) Depolymerase from Pseudomonas tamsuii TKU015

The management of fishery residues and plastics is considered to be a vital strategy for conserving resources and maintaining the quality of the environment. Poly(l-lactic acid) (PLA) is a commercially promising, renewable, and biodegradable plastic. In this study, a PLA depolymerase was produced in a squid pen powder (SPP) and recycled plastic waste (PLA powder)-containing medium by Pseudomonas tamsuii TKU015, a bacterial strain isolated from Taiwanese soil. This PLA depolymerase had a molecular weight of 58 kDa and was purified to homogeneity from the supernatant of a TKU015 culture. The optimum pH of TKU015 PLA depolymerase is 10, and the optimal temperature of the enzyme is 60 °C. In addition to PLA, TKU015 PLA depolymerase degraded fibrinogen and tributyrin, but did not hydrolyze casein, triolein, and poly(β-hydroxybutyrate). Taken together, these data demonstrate that P. tamsuii TKU015 produces a PLA depolymerase to utilize SPP and polylactide as carbon/nitrogen sources.