Performance of Biotrickling Filter Inoculated with Activated Sludge for Chlorobenzene Removal

Biological-based methods for the removal of volatile organic compounds (VOCs) and heavy metals

The current scenario of increased population and industrial advancement leads to the spoliation of freshwater and tapper of the quality of water. These results decrease in freshwater bodies near all of the areas. Besides, organic and inorganic compounds discharged from different sources into the available natural water bodies are the cause of pollution. The occurrence of heavy metals in water and volatile organic compounds (VOCs) in the air is responsible for a vast range of negative impacts on the atmosphere and human health. Nonetheless, high uses of heavy metals for human purposes may alter the biochemical and geochemical equilibrium. The major air contaminants which are released into the surroundings known as VOCs are produced through different kinds of sources, such as petrochemical and pharmaceutical industries. VOCs are known to cause various health hazards. VOCs are a pivotal group of chemicals that evaporate readily at room temperature. To get over this problem, biofiltration technology has been evolved for the treatment of heavy metals using biological entities such as plants, algae, fungi, and bacteria. Biofiltration technology is a beneficial and sustainable method for the elimination of toxic pollutants from the aquatic environment. Various types of biological technologies ranging from biotrickling filters to biofilters have been developed and they are cost-effective, simple to fabricate, and easy to perform. A significant advantage of this process is the pollutant that is transformed into biodegradable trashes which can decompose within an average time period, thus yielding no secondary pollutants. The aim of this article is to scrutinize the role of biofiltration in the removal of heavy metals in wastewater and VOCs and also to analyze the recent bioremediation technologies and methods.

A review and perspective of recent research in biological treatment applied in removal of chlorinated volatile organic compounds from waste air

Chlorinated volatile organic compounds (Cl-VOCs) waste air is a kind of typical recalcitrant organic compounds, which poses a great threat to the ecological environment and human health. At present, the biotechnology is considered as a potential strategy for the Cl-VOCs removal due to the advantages of low energy consumption and less possibility of secondary pollution. This work summarizes the recent researches on strains, bioreactors and technology integration. The dominant pure strains for biodegradation of Cl-VOCs are first outlined with a special focus on the co-metabolism of multi-components. It then summarizes two bioreactors (optimized airlift reactor (ALR) and two-phase partitioning bioreactor (TPPB)) and strategy (addition of surfactant) for improvement of biotrickling filter (BTF), which are benefit to achieve the mass transfer enhancement in the removal of hydrophobic Cl-VOCs from waste air. After that, the integration technologies, such as magnetic field (MF)-BTF, non-thermal plasma (NTP)/ultraviolet light (UV)-BTF, and microbial electrolytic cells (MEC), are elucidated, which provide opportunities for complete mineralization of Cl-VOCs in a more efficient, energy-saving and economical way. Finally, current challenges and a perspective of future research on biotechnology for Cl-VOCs removal are thoroughly discussed.

Combination of highly efficient microflora to degrade paint spray exhaust gas

Spray paint exhaust gas contains recalcitrant volatile organic compounds (VOCs), such as benzene, toluene and xylene (BTX). Treating BTX with a biofilter often achieves unsatisfactory results because the biofilter lacks efficient microbial community. In this work, three strains for BTX degradation were isolated and identified as Pseudomonas putida, Bacillus cereus and Bacillus subtilis by using 16S rRNA sequencing technology. A consortium of highly efficient microbial community was then constructed on a stable biofilm to treat BTX in a biofilter. A relatively suitable ratio of P. putida, B. cereus and B. subtilis was obtained. An efficiency of over 90% was achieved in the biofilter with VOC concentration of 1000 mg/m3 through inoculation with the microbial community after only 10 days of operation. Thus, fast start-up of the biofilter was realised. Analysis of intermediate products by gas chromatography-mass spectrometry indicated that BTX was degraded into short-chain aldehydes or acids via ring opening reactions.

Effects of n-butanol presence, inlet loading, empty bed residence time and starvation periods on the performance of a biotrickling filter removing cyclohexane vapors from air

This paper presents the results of investigations on the removal of cyclohexane vapors from air using a peat-perlite packed biotrickling filter. Effects of basic process parameters i.e. inlet loading and empty bed residence time as well as introduction of n-butanol to the treated air stream and starvation periods on the process performance were evaluated. The results show that the introduction of hydrophilic n-butanol results in an enhanced removal of hydrophobic cyclohexane comparing to the experiments where only cyclohexane was treated. Additionally, the biotrickling filter performance after the starvation events is regained to more extent for mixed system than for the single cyclohexane. A novel and interesting element of the paper is the application of an electronic nose for the process monitoring. Obtained results are discussed in the perspective of an influence of the presence of a compound with different affinity to aqueous phase on the removal efficiency of the compound with opposite chemical properties.

Technologies for deodorization of malodorous gases

There is an increasing number of citizens' complaints about odor nuisance due to production or service activity. High social awareness imposes pressure on entrepreneurs and service providers forcing them to undertake effective steps aimed at minimization of the effects of their activity, also with respect to emission of malodorous substances. The article presents information about various technologies used for gas deodorization. Known solutions can be included into two groups: technologies offering prevention of emissions, and methodological solutions that enable removal of malodorous substances from the stream of emitted gases. It is obvious that the selection of deodorization technologies is conditioned by many factors, and it should be preceded by an in-depth analysis of possibilities and limitations offered by various solutions. The aim of the article is presentation of the available gas deodorization technologies as to facilitate the potential investors with selection of the method of malodorous gases emission limitation, suitable for particular conditions.

Air pollution control through biotrickling filters: a review considering operational aspects and expected performance

The biological removal of pollutants, especially through biotrickling filters (BTFs), has recently become attractive for the low investment and operational costs and the low secondary pollution. This paper is intended to investigate the state of the art on BTF applications. After an overview on the biodegradation process and the typical parameters involved, this paper presents the analysis of a group of 16 literature studies chosen as the references for this sector. The reference studies differ from one another by the pollutants treated (volatile organic compounds [VOC], hydrogen sulphide, nitrogen oxides and trimethylamine), the geometry and size of the BTFs, and the procedures of the tests. The reference studies are analyzed and discussed in terms of the operational conditions and the results obtained, especially with respect to the removal efficiencies (REs) and the elimination capacities (ECs) of the pollutants considered. Empty bed residence time (EBRT), pollutant loading rate, temperature, pH, oxygen availability, trickling liquid flow rate, inoculum selection and biomass control strategies revealed to be the most important operational factors influencing the removal performance of a BTF.