The architectures and surface behavior of highly branched molecules

Brownian dynamics simulations of bottlebrush polymers in dilute solution under simple shear and uniaxial extensional flows

We study the dynamics of bottlebrush polymer molecules in dilute solutions subjected to shear and uniaxial extensional flows using Brownian dynamics simulations with hydrodynamic interaction (HI). Bottlebrush polymers are modeled using a coarse-grained representation, consisting of a set of beads interacting pairwise via a purely repulsive potential and connected by finitely extensible nonlinear springs. We present the results for molecular stretching, stress, and solution viscosity during the startup of flow as well as under steady state as a function of side chain length while keeping the backbone length fixed. In extensional flow, the backbone fractional extension and the first normal stress difference decrease with an increase in side chain length at a fixed Weissenberg number (Wi). Using simulation results both in the presence of and in the absence of HI, we show that this is primarily a consequence of steric interaction resulting from the dense grafting of side chains. In shear flow, we observe a shear-thinning behavior in all cases, although it becomes less pronounced with increasing side chain length. Furthermore, nonmonotonicity in the backbone fractional extension is observed under shear, particularly at high Wi. We contextualize our simulation results for bottlebrush polymers with respect to existing studies in the literature for linear polymers and show that the unique dynamical features characterizing bottlebrush polymers arise on account of their additional molecular thickness due to the presence of densely grafted side chains.

Synthesis of hyperbranched polymer films via electrodeposition and oxygen-tolerant surface-initiated photoinduced polymerization

HYPOTHESIS

Hyperbranched polymers, not only possess higher functionality, but are also easier to prepare compared to dendrimers and dendric polymers. Combining electrodeposition and surface-initiated photoinduced electron transfer-reversible addition-fragmentation chain transfer (SI-PET-RAFT) polymerization is hypothesized to be a novel strategy for preparing hyperbranched polymer films on conductive surfaces without degassing.

EXPERIMENTS

Polymer brush grafted films with four different architectures (i.e. linear, branched, linear-block-branched, and branched-block-linear) were prepared on gold-coated glass substrates using electrodeposition, followed by SI-PET-RAFT polymerization. The resulting film structure and thickness, surface topology, absorption property, and electrochemical behavior were confirmed by spectroscopy, microscopy, microbalance technique, and impedance measurement.

FINDINGS

These hyperbranched polymer brushes were capable of forming a thicker but more uniformly covered films compared to linear polymer brush films, demonstrating that hyperbranched polymer films can be potentially useful for fabricating protective polymer coatings on various conductive surfaces.

Nanocontainers Against Biofouling and Corrosion Degradation of Materials: A Short Review With Prospects

The current state of the art in active corrosion prevention is based on the use of macromolecular containers that can store and release corrosion inhibitors particularly to the surface when corrosion develops. These corrosion inhibitor-containing nano- or microcontainers are subsequently infused into coatings, allowing them to self-heal. Especially, nanocontainers for self-healing coatings with controlled corrosion inhibitors, energy storage, cement fracture repair, and antifouling metal protection have recently been developed. Incorporating these nanocontainers into materials in small amounts (e.g., 5–10 wt% in paints) provided anticorrosion protection that was incomparably better than the current approaches. Furthermore, the materials developed had multifunctional properties, including self-healing, antibacterial, and antimicrobial properties. The primary goal of this review was to compile the different research studies that have been published in a variety of publications so that the reader may better understand the potential of these new types of nanotechnology and the prospects for nanocontainers.

Thermally-induced hyperbranching of bromine-containing polyesters by insertion of in situ generated chain-end carbenes

Hyperbranched, biodegradable PCL-based polymers are obtained through a random but invasive migration of an in situ generated carbene end group which is unmasked via the thermolysis of its precursor diazirine moiety. These hyperbranched cores are used as macroinitiators for 'grafting-from' polymerisation using controlled radical polymerisation to achieve amphiphilic copolymers which can subsequently be self-assembled into spherical core-shell micelles.

Weakly Ionically Bound Thermosensitive Hyperbranched Polymers

We synthesized novel amphiphilic hyperbranched polymers (HBPs) with variable contents of weakly ionically tethered thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) macrocations in contrast to traditional covalent linking. Their assembling behavior was studied below and above the lower critical solution temperature (LCST). The HBPs underwent a morphological transition under changing temperature and ionic strength due to the LCST transition of PNIPAM and the reduction in the ionization degree of terminal ionic groups, respectively. We suggest that, in contrast to traditional branched polymers, ionically linked PNIPAM macrocations can reversibly disassociate from the sulfonate groups and form mobile coronas, endowing the dynamic micellar morphologies. In addition, assembly at the air-water interface confined PNIPAM macrocations and resulted in the formation of heterogeneous Langmuir-Blodgett (LB) monolayers with diverse surface morphologies for different peripheral compositions with circular domains formed in the condensed state. The HBPs with 25% PNIPAM showed larger and more stable circular domains that were partially preserved at high compression than those of HBPs with 50% PNIPAM. Moreover, the LB monolayers showed variable surface mechanical and surface charge distribution, which can be attributed to net dipole redistribution caused by the behavior of mobile PNIPAM macrocations and core sulfonate groups.

Amino Acid- and Growth Factor-Based Multifunctional Nanocapsules for the Modulation of the Local Microenvironment in Tissue Engineering

Oxidative damage to cells from metabolites at a wound site is one of the trickiest factors inhibiting tissue regeneration, especially with bulk damage. In addition, an excessive inflammatory reaction by the body at the wound site can make it even worse. How to scavenge the reactive oxygen species (ROS) produced from metabolism and inflammatory reactions has become a critical issue in tissue engineering. Here, we utilize the natural bioactive small molecules l-arginine and l-phenylalanine and the growth factor inositol to synthesize a branched poly(ester amide) (BPEA) to fabricate BPEA nanocapsules for vitamin E delivery at wound sites. BPEA nanocapsules loaded with vitamin E (BPEA@VE NCs) could protect cells from both extracellular and intracellular damage by scavenging ROS. Simultaneously, the inflammatory reaction could also be downregulated, benefiting from the introduction of l-arginine. Furthermore, the biodegradation products of BPEA are natural metabolites of the body, such as amino acids and growth factors, guaranteeing the biocompatibility of the BPEA@VE NCs. The protective ability of the BPEA@VE NCs was also investigated in vivo for accelerated wound healing. All the results indicate that the BPEA@VE NCs have promising potential for the modulation of the local microenvironment in tissue engineering for excellent antioxidative and anti-inflammatory properties.

Self-assembly of amphiphilic polymers of varying architectures near attractive surfaces

We use coarse-grained molecular dynamics simulations to investigate the assembly of A-B amphiphilic polymers near/on surfaces as a function of polymer architecture and surface attraction to the solvophobic B-block in the polymer. We study four polymer architectures: linear, bottlebrush with a backbone that is longer than each of the side chains, bottlebrush where the solvophobic backbone is similar in length to each of the side chains, and 'star-like' architectures where the backbone is significantly shorter than the side chain lengths. For each architecture and surface-B attraction, we quantify the assembled aggregate structure (i.e., aggregation number, domain shapes and sizes) and the chain conformations (i.e., components of the chain radius of gyration) on and away from the surface. For all the architectures and surface-B attraction strengths, the assembled structure away from the surface is similar to the assembly observed in bulk systems without surfaces. Near/on the surface, the assembled B-blocks form domains whose shapes and sizes are dependent on the surface-B attraction strength and the ability of the B-block in the polymer architecture to change conformations and pack on the surface. Domain sizes formed from linear and 'star-like' polymer architectures show the highest sensitivity to surface-B-block attraction strength, transitioning from hemispherical to disordered domains with increasing attraction strength. In contrast, bottlebrushes with long backbones and short side chains transition from hemispherical to striped to continuous domains with increasing surface-B attraction strength. Bottlebrushes with similar solvophobic backbone and side chain lengths form hemispherical domains that do not change significantly with the surface-B-block attraction strength. These computational results can guide experimentalists in their choices of surface chemistry and polymer architecture to achieve desired assembled domain shapes and sizes on the surface.

Development of thermo-responsive polycaprolactone macrocarriers conjugated with Poly(N-isopropyl acrylamide) for cell culture

Poly(N-isopropyl acrylamide) (PNIPAAm) is a well-known 'smart' material responding to external stimuli such as temperature. PNIPAAm was successfully conjugated to polycaprolactone (PCL) bead surfaces through amidation reaction. Functionalization steps were characterized and confirmed by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy and Energy Dispersion Spectroscopy. PNIPAAm-conjugated PCL allowed human dermal fibroblast cells (HDF) and mesenchymal stem cells (MSC) to adhere, spread, and grow successfully. By reducing the temperature to 30 °C, more than 70% of HDF were detached from PNIPAAm-conjugated PCL macrocarriers with 85% viability. The cell detachment ratio by trypsin treatment was slightly higher than that induced by reduced temperature, however, cell detachment from PNIPAAm-conjugated macrocarriers by lowering the temperature significantly reduced cell death and increased both cell viability and the recovery potential of the detached cells. HDF attachment and detachment were also observed by Live-Dead staining and phase contrast imaging. The expression of extracellular matrix proteins such as Laminin and Fibronectin was also affected by the trypsinization process but not by the reduced temperature process. Taken together, our results showed that thermo-responsive macrocarriers could be a promising alternative method for the non-invasive detachment of cells, in particular for tissue engineering, clinical applications and the use of bioreactors.

Well-Defined and Precision-Grafted Bottlebrush Polypentenamers from Variable Temperature ROMP and ATRP

Polypentenamer macroinitiators are synthesized through variable temperature ring opening metathesis polymerization of 3-cyclopentenyl α-bromoisobutyrate, which has sufficient ring strain (ΔH_p = -22.6 kJ mol^-1) to produce targeted molar mass (<5% from theoretical), low dispersity (1.17 ≤ Đ ≤ 1.23), and high conversion (∼72%). An initiation site for atom-transfer radical polymerization at every fifth backbone carbon allows "grafting-from" of styrene with quantitative initiation and linear molar mass increase with time. These bottlebrushes retain a low dispersity (Đ ≤ 1.34) at varying graft degrees of polymerization (5 ≤ N_sc ≤ 49) and have a glass transition temperature highly sensitized to graft length. Extension of the grafts with methyl methacrylate produces a core-shell brush polymer with high molar mass (>1000 kg mol^-1) and Đ = 1.33. This system exhibits high synthetic versatility and control with a unique flexible backbone to expand the suite of densely grafted polymers.

Two-Dimensional Controlled Syntheses of Polypeptide Molecular Brushes via N-Carboxyanhydride Ring-Opening Polymerization and Ring-Opening Metathesis Polymerization

Well-defined molecular brushes bearing polypeptides as side chains were prepared by a "grafting through" synthetic strategy with two-dimensional control over the brush molecular architectures. By integrating N-carboxyanhydride ring-opening polymerizations (NCA ROPs) and ring-opening metathesis polymerizations (ROMPs), desirable segment lengths of polypeptide side chains and polynorbornene brush backbones were independently constructed in controlled manners. The N2 flow accelerated NCA ROP was utilized to prepare polypeptide macromonomers with different lengths initiated from a norbornene-based primary amine, and those macromonomers were then polymerized via ROMP. It was found that a mixture of dichloromethane and an ionic liquid were required as the solvent system to allow for construction of molecular brush polymers having densely-grafted peptide chains emanating from a polynorbornene backbone, poly(norbornene-graft-poly(β-benzyl-l-aspartate)) (P(NB-g-PBLA)). Highly efficient postpolymerization modification was achieved by aminolysis of PBLA side chains for facile installment of functional moieties onto the molecular brushes.

Temperature-driven self-assembly of self-limiting uniform supraparticles from non-uniform unimolecular micelles

In this work, the self-assembly of non-uniform unimolecular micelles constituted of a hyperbranched polyester core decorated with a corona of thermoresponsive poly(N-isopropylacrylamide) (PNIPAm) chains has been studied. As revealed by dynamic light scattering (DLS), transmission electron microscopy (TEM) and small angle X-ray scattering (SAXS), these unimicelles form uniform supraparticles through a thermally-induced self-limited process, as well as exhibit molecular features commonly observed in PNIPAm-based gels. We believe that these results provide new insights into the application of stimuli-responsive polymeric materials as versatile building blocks to build up soft supraparticles displaying well-defined dimensional characteristics.

Functionalization of surfaces with branched polymers

This review summarizes recent developments in the field of surfaces functionalized with branched polymers, including the fabrication methods, morphologies, properties and applications.

Controllable and Reversible Dimple-Shaped Aggregates Induced by Macrocyclic Recognition Effect

A novel dimethyl acrylate 18-membered macrocycle (DMECE), acting as both bifunctional monomer and cross-linker, was designed and synthesized, and thus employed to construct a series of macrocycle-containing amphiphilic hyperbranched polymers (HBPs). The macrocyclic recognition effect between the HBPs and alkali metal ions showed that Na(+) was introduced in 1:1 interactive mode, whereas K(+) and Rb(+) were in 2:1 ratio. Through the formation of the DMECE/K(+) = 2:1 rigid "sandwich" complex of amphiphilic hyperbranched polymers, dimple-shaped aggregates were observed by TEM, SEM and AFM. Moreover, the initial concentration, the nature of solvent, the mode and affinity of the macrocyclic recognition effect as well as the amount of K(+), were essential control factors for the formation of dimple-shaped aggregates. Most importantly, the macrocyclic recognition effect endows the reversibility of the dimple-shaped aggregates and the size controllability of its circular opening, which provides a new strategy for design novel macrocycle-containing HBPs and great potential application in the field of capture and release.

Dissipative particle dynamics simulation study on self-assembly of amphiphilic hyperbranched multiarm copolymers with different degrees of branching

Hyperbranched multiarm copolymers (HMCs) have shown great potential to be excellent precursors in self-assembly to form various supramolecular structures in all scales and dimensions in solution. However, theoretical studies on the self-assembly of HMCs, especially the self-assembly dynamics and mechanisms, have been greatly lagging behind the experimental progress. Herein, we investigate the effect of degree of branching (DB) on the self-assembly structures of HMCs by dissipative particle dynamics (DPD) simulation. Our simulation results demonstrate that the self-assembly morphologies of HMCs can be changed from spherical micelles, wormlike micelles, to vesicles with the increase of DBs, which are qualitatively consistent with the experimental observations. In addition, both the self-assembly mechanisms and the dynamic processes for the formation of these three aggregates have been systematically disclosed through the simulations. These self-assembly details are difficult to be shown by experiments and are very useful to fully understand the self-assembly behaviors of HMCs.

Perfluoroalkyl-Functionalized Hyperbranched Polyglycerol as Pore Forming Agents and Supramolecular Hosts in Polymer Microspheres

Perfluoroalkyl-functionalized, hyperbranched polyglycerols that produce stable microbubbles are integrated into a microfluidic emulsion to create porous microspheres. In a previously-presented work a dendrimer with a perfluorinated shell was used. By replacing this dendrimer core with a hyperbranched core and evaluating different core sizes and degrees of fluorinated shell functionalization, we optimized the process to a more convenient synthesis and higher porosities. The new hyperbranched polyglycerol porogens produced more pores and can be used to prepare microspheres with porosity up to 12% (v/v). The presented preparation forms pores with a perfluoroalkyl-functionalized surface that enables the resulting microspheres to act as supramolecular host systems. The microspheres can incorporate gases into the pores and actives in the polymer matrix, while the perfluoroalkylated pore surface can be used to immobilize perfluoro-tagged molecules onto the pores by fluorous-fluorous interaction.

Branched Polyhedral Oligomeric Silsesquioxane Nanoparticles Prepared via Strain-Promoted 1,3-Dipolar Cycloadditions

Conjugation of small organic molecules and polymers to polyhedral oligosilsesquioxane (POSS) cores results in novel hybrid materials with unique physical characteristics. We report here an approach in which star-shaped organic-inorganic scaffolds bearing eight cyclooctyne moieties can be rapidly functionalized via strain-promoted azide-alkyne cycloaddition (SPAAC) to synthesize a series of nearly monodisperse branched core-shell nanoparticles with hydrophobic POSS cores and hydrophilic arms. We established that SPAAC is a robust method for POSS core octafunctionalization with the reaction rate constant of 1.9 × 10(-2) M(-1) s(-1). Functionalization with poly(ethylene glycol) (PEG) azide, fluorescein azide, and unprotected lactose azide gave conjugates which represent different classes of compounds: polymer conjugates, fluorescent dots, and bioconjugates. These resulting hybrid compounds were preliminarily tested for their ability to self-assemble in solution and at the air-water interface. We observed the formation of robust smooth Langmuir monolayers with diverse morphologies. We found that polar lactose moieties are completely submerged into the subphase whereas the relatively hydrophobic fluorescein arms had extended conformation at the interface, and PEG arms were partially submerged. Finally, we observed the formation of stable micelles with sizes between 70 and 160 nm in aqueous solutions with size and morphology of the structures dependent on the molecular weight and the type of the peripheral hydrophilic moieties.

Architecture, Assembly, and Emerging Applications of Branched Functional Polyelectrolytes and Poly(ionic liquid)s

Branched polyelectrolytes with cylindrical brush, dendritic, hyperbranched, grafted, and star architectures bearing ionizable functional groups possess complex and unique assembly behavior in solution at surfaces and interfaces as compared to their linear counterparts. This review summarizes the recent developments in the introduction of various architectures and understanding of the assembly behavior of branched polyelectrolytes with a focus on functional polyelectrolytes and poly(ionic liquid)s with responsive properties. The branched polyelectrolytes and poly(ionic liquid)s interact electrostatically with small molecules, linear polyelectrolytes, or other branched polyelectrolytes to form assemblies of hybrid nanoparticles, multilayer thin films, responsive microcapsules, and ion-conductive membranes. The branched structures lead to unconventional assemblies and complex hierarchical structures with responsive properties as summarized in this review. Finally, we discuss prospectives for emerging applications of branched polyelectrolytes and poly(ionic liquid)s for energy harvesting and storage, controlled delivery, chemical microreactors, adaptive surfaces, and ion-exchange membranes.

A rapid crosslinking injectable hydrogel for stem cell delivery, from multifunctional hyperbranched polymers via RAFT homopolymerization of PEGDA

A novel injectable hydrogel for stem cell delivery was prepared from multifunctional hyperbranched polyPEGDA and thiolated hyaluronic acid.

Bioapplications of hyperbranched polymers

The recent research progress in biological and biomedical applications of hyperbranched polymers has been summarized in this review.

Hydrogen peroxide-responsive anticancer hyperbranched polymer micelles for enhanced cell apoptosis

Hydrogen peroxide-responsive nanomicelles from hyperbranched polymers were developed for effective cancer therapy through enhanced apoptotic cell death.

Hyperbranched polymers: advances from synthesis to applications

This review summarizes the advances in hyperbranched polymers from the viewpoint of structure, click synthesis and functionalization towards their applications in the last decade.

Synthesis and therapeutic applications of biocompatible or biodegradable hyperbranched polymers

The recent progress in the synthesis, modifications and therapeutic applications of biocompatible or biodegradable hyperbranched polymers has been reviewed.

Cyclodextrin-tunable reversible self-assembly of a thermoresponsive Y-shaped polymer

The reversible self-assembly behavior of thermoresponsive γ-shaped polymer can be effectively tuned based on the inclusion complexation, intermolecular hydrogen bonding and steric hindrance of β-CD.