Dispersion polymerization in non-polar solvent: Evolution toward emerging applications

Template-Directed Polymerization of Binary Acrylate Monomers on Surface-Activated Lignin Nanoparticles in Toughening of Bio-Latex Films

Fabricating bio-latex colloids with core-shell nanostructure is an effective method for obtaining films with enhanced mechanical characteristics. Nano-sized lignin is rising as a class of sustainable nanomaterials that can be incorporated into latex colloids. Fundamental knowledge of the correlation between surface chemistry of lignin nanoparticles (LNPs) and integration efficiency in latex colloids and from it thermally processed latex films are scarce. Here, an approach to integrate self-assembled nanospheres of allylated lignin as the surface-activated cores in a seeded free-radical emulsion copolymerization of butyl acrylate and methyl methacrylate is proposed. The interfacial-modulating function on allylated LNPs regulates the emulsion polymerization and it successfully produces a multi-energy dissipative latex film structure containing a lignin-dominated core (16% dry weight basis). At an optimized allyl-terminated surface functionality of 1.04 mmol g^-1 , the LNPs-integrated latex film exhibits extremely high toughness value above 57.7 MJ m^-3 . With multiple morphological and microstructural characterizations, the well-ordered packing of latex colloids under the nanoconfinement of LNPs in the latex films is revealed. It is concluded that the surface chemistry metrics of colloidal cores in terms of the abundance of polymerization-modulating anchors and their accessibility have a delicate control over the structural evolution of core-shell latex colloids.

Span 85-Based Macromolecular Stabilizer for the Preparation of PMMA Colloidal Particles in a Nonpolar Media

Colloidal particles in a nonpolar media are closely correlated to industrial applications in particular particle-based electrophoretic display techniques. However, the synthesis of the commonly used poly(12-hydroxystearic acid)(PHSA)-based stabilizers for the dispersion polymerization of polymer particles in nonpolar solvent are troublesome. We report a sorbitan trioleate (Span 85)-based macromolecular copolymer stabilizer that can be easily synthesized and used for the preparation of PMMA particles in a nonpolar solvent. This is realized by synthesizing random copolymers of methyl methacrylate (MMA) and polymerizable sorbitan trioleate (M-Span 85), and the latter can be synthesized from the commercial product Span 85. Using this stabilizer, the resulting PMMA particles have narrow size distribution and tunable diameters. With the stabilizers, transferring water-dispersible particles to a nonpolar solvent and further preparing core/shell particles was verified to be a useful route. This provides an effective approach for using water-dispersible functional nanoparticles in nonpolar environments. In addition, the prepared PMMA particles are demonstrated to be a useful model system to study crystallization or glass transitions by quantitative confocal microscopy.

Building Permanently Optically Active Particles from Absolutely Achiral Polymer

Chirality in polymer particles represents one of the most dynamic areas of nanoscale materials today. The chirality of most chiral polymeric particles (CPPs) derived from achiral monomers/polymers has a strong...

The Influence of Monomer Structure on the Properties of Ionogels Obtained by Thiol-Ene Photopolymerization

The influence of ene and thiol monomer structure on the mechanical and electrochemical properties of thiol-ene polymeric ionogels were investigated. Ionogels were obtained in situ by thiol-ene photopolymerization of 1,3,5-triallyl-1,3,5-triazine-2,4,6(1H,3H,5H)-trione (TATT), 2,4,6-triallyloxy-1,3,5-triazine (TAT), diallyl phthalate (DAP), and glyoxal bis(diallyl acetal) (GBDA) used as enes and trimethylolpropane tris(3-mercaptopropionate) (TMPTP), pentaerythritol tetrakis(3-mercaptopropionate) (PETMP), and pentaerythritol tetrakis(3-mercaptobutyrate) (PETMB) used as thiols in 70 wt.% of ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (EMImNTf₂). The mechanical strength of ionogels was studied by puncture resistance and ionic conductivity by electrochemical impedance spectroscopy. The course of photopolymerization by photo-DSC method (differential scanning calorimetry) as well as characterization of compositions and its components (by IR and UV spectroscopy-Kamlet-Taft parameters) were also studied. The resulting ionogels were opaque, with phase separation, which resulted from the dispersion mechanism of polymerization. The mechanical and conductive properties of the obtained materials were found to be largely dependent on the monomer structure. Ionogels based on triazine monomers TAT and TATT were characterized by higher mechanical strength, while those based on aliphatic GBDA had the highest conductivity. These parameters are strongly related to the structure of the polymer matrix, which is in the form of connected spheres. The conductivity of ionogels was high, in the range of 3.5-5.1 mS∙cm^-1.

Zwitterionic Nanogels and Microgels: An Overview on Their Synthesis and Applications

Zwitterionic polymers by virtue of their unique chemical and physical attributes have attracted researchers in recent years. The simultaneous presence of positive and negative charges in the same repeat unit renders them of various interesting properties such as superhydrophilicity, which has significantly broadened their scope for being used in different applications. Among polyzwitterions of different architectures, micro- and/or nano-gels have started receiving attention only until recently. These 3D cross-linked colloidal structures show peculiar characteristics in context to their solution properties, which are attributable either to the comonomers present or the presence of different electrolytes and biological specimens. In this review, a concise yet detailed account is provided of the different synthetic techniques and application domains of zwitterion-based micro- and/or nanogels that have been explored in recent years. Here, the focus is kept solely on the "polybetaines," which have garnered maximum research interest and remain the extensively studied polyzwitterions in literature. While their vast application potential in the biomedical sector is being detailed here, some other areas of scope such as using them as microreactors for the synthesis of metal nanoparticles or making smart membranes for water-treatment are discussed in this minireview as well.

Microporous poly(glycidyl methacrylate-co-ethylene glycol dimethyl acrylate) microspheres: synthesis, functionalization and applications

As a new kind of functional material, micron-sized porous polymer microspheres are a hot research topic in the field of polymer materials.

Exploring the Upper Size Limit for Sterically Stabilized Diblock Copolymer Nanoparticles Prepared by Polymerization-Induced Self-Assembly in Non-Polar Media

Reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization of benzyl methacrylate is used to prepare a series of well-defined poly(stearyl methacrylate)-poly(benzyl methacrylate) (PSMA-PBzMA) diblock copolymer nanoparticles in mineral oil at 90 °C. A relatively long PSMA54 precursor acts as a steric stabilizer block and also ensures that only kinetically trapped spheres are obtained, regardless of the target degree of polymerization (DP) for the core-forming PBzMA block. This polymerization-induced self-assembly (PISA) formulation provides good control over the particle size distribution over a wide size range (24-459 nm diameter). 1H NMR spectroscopy studies confirm that high monomer conversions (≥96%) are obtained for all PISA syntheses while transmission electron microscopy and dynamic light scattering analyses show well-defined spheres with a power-law relationship between the target PBzMA DP and the mean particle diameter. Gel permeation chromatography studies indicate a gradual loss of control over the molecular weight distribution as higher DPs are targeted, but well-defined morphologies and narrow particle size distributions can be obtained for PBzMA DPs up to 3500, which corresponds to an upper particle size limit of 459 nm. Thus, these are among the largest well-defined spheres with reasonably narrow size distributions (standard deviation ≤20%) produced by any PISA formulation. Such large spheres serve as model sterically stabilized particles for analytical centrifugation studies.

Janus dimers from tunable phase separation and reactivity ratios

Janus dimers, as a typical species of anisotropic material, are useful for both theoretical simulations and practical applications.

Colloidal Stabilizer-Assisted Polymerization-Induced Precipitation Method for Colloidally Stable Polyacid Particles

Near-monodispersed, colloidally stable, submicrometer-sized poly(acid phosphoxy ethyl methacrylate) (PAPEMA) latex particles were synthesized by free-radical dispersion polymerization using poly( N-vinylpyrrolidone) (PNVP) as both a steric colloidal stabilizer and a precipitating agent. Polymerization in the absence of PNVP led to a homogeneous transparent solution of PAPEMA, which indicates that the PNVP is essential for latex formation and the complex of PNVP and PAPEMA was formed during the dispersion polymerization. Dispersion copolymerizations with a divinyl cross-linking comonomer (∼20 wt % based on acid phosphoxy ethyl methacrylate) were also successful in synthesizing near-monodispersed, colloidally stable cross-linked PAPEMA latex particles, and the softness and p K_a values of the resulting PAPEMA latex particles can be controlled by varying the divinyl comonomer concentration. These sterically stabilized latex particles were characterized by electron microscopy, dynamic light scattering, X-ray photoelectron spectroscopy, elemental microanalysis, and Fourier transform infrared spectroscopy. Characterization results indicated that the PNVP colloidal stabilizer was likely to be located homogeneously on the particle surfaces and within the interior of particles. Finally, it was demonstrated that the PAPEMA latex particles worked as an effective surface modifier for metal surfaces.

Studying a novel AIE coating and its handling process via fluorescence spectrum

Study the existing state of TPE–EPOXY-1 polymer chains in good solution varied with its concentration.

Determining the Effective Density and Stabilizer Layer Thickness of Sterically Stabilized Nanoparticles

A series of model sterically stabilized diblock copolymer nanoparticles has been designed to aid the development of analytical protocols in order to determine two key parameters: the effective particle density and the steric stabilizer layer thickness. The former parameter is essential for high resolution particle size analysis based on analytical (ultra)centrifugation techniques (e.g., disk centrifuge photosedimentometry, DCP), whereas the latter parameter is of fundamental importance in determining the effectiveness of steric stabilization as a colloid stability mechanism. The diblock copolymer nanoparticles were prepared via polymerization-induced self-assembly (PISA) using RAFT aqueous emulsion polymerization: this approach affords relatively narrow particle size distributions and enables the mean particle diameter and the stabilizer layer thickness to be adjusted independently via systematic variation of the mean degree of polymerization of the hydrophobic and hydrophilic blocks, respectively. The hydrophobic core-forming block was poly(2,2,2-trifluoroethyl methacrylate) [PTFEMA], which was selected for its relatively high density. The hydrophilic stabilizer block was poly(glycerol monomethacrylate) [PGMA], which is a well-known non-ionic polymer that remains water-soluble over a wide range of temperatures. Four series of PGMA x -PTFEMA y nanoparticles were prepared (x = 28, 43, 63, and 98, y = 100-1400) and characterized via transmission electron microscopy (TEM), dynamic light scattering (DLS), and small-angle X-ray scattering (SAXS). It was found that the degree of polymerization of both the PGMA stabilizer and core-forming PTFEMA had a strong influence on the mean particle diameter, which ranged from 20 to 250 nm. Furthermore, SAXS was used to determine radii of gyration of 1.46 to 2.69 nm for the solvated PGMA stabilizer blocks. Thus, the mean effective density of these sterically stabilized particles was calculated and determined to lie between 1.19 g cm-3 for the smaller particles and 1.41 g cm-3 for the larger particles; these values are significantly lower than the solid-state density of PTFEMA (1.47 g cm-3). Since analytical centrifugation requires the density difference between the particles and the aqueous phase, determining the effective particle density is clearly vital for obtaining reliable particle size distributions. Furthermore, selected DCP data were recalculated by taking into account the inherent density distribution superimposed on the particle size distribution. Consequently, the true particle size distributions were found to be somewhat narrower than those calculated using an erroneous single density value, with smaller particles being particularly sensitive to this artifact.

Inhibiting the Thermal Gelation of Copolymer Stabilized Nonaqueous Dispersions and the Synthesis of Full Color PMMA Particles

Polymeric particle dispersions have numerous potential applications; currently one of the most relevant is their use as inks in electrophoretic displays. These colloidal particles are synthesized from the appropriate monomer using nonaqueous dispersion (NAD) polymerization in a nonpolar solvent, which requires a stabilizer to control particle size and morphology. We have previously reported the facile synthesis of poly(methyl methacrylate)-block-poly(octadecyl acrylate) (PMMA-b-PODA) by atom transfer radical polymerization (ATRP), and its use in the NAD polymerization of MMA in hexane/dodecane solvent mixtures. Here we report the synthesis of monodisperse PMMA particles in dodecane following a standard "industrial" procedure using these PMMA-b-PODA stabilizers. However, it was observed that the particle suspensions solidified when they were left at temperatures below ∼18 °C yet redispersed upon being heated. Differential scanning calorimetry, dynamic light scattering, and rheological studies demonstrated that this thermoresponsive behavior was due to a liquid-gel transition occurring at 17.5 °C as a consequence of the upper critical solution temperature of PODA in dodecane being traversed. Consequently, new copolymers were synthesized by ATRP with an ethylhexyl acrylate (EHA) co-monomer incorporated into the lyophilic (dodecane compatible) block. Dispersions stabilized by these PMMA-b-P(ODA-co-EHA) polymers with high EHA contents exhibited lower gelation temperatures because of the greater solvent compatibility with dodecane. The use of a PMMA65-b-(ODA10-co-EHA45) copolymer stabilizer (with the highest EHA content) gave PMMA dispersions that showed no gelation down to 4 °C and monodisperse cross-linked PMMA particles containing organic dyes (cyan, magenta, red, and black) giving colored particles across the size range of approximately 100-1300 nm.

Systemic research of fluorescent emulsion systems and their polymerization process with a fluorescent probe by an AIE mechanism

An AIE luminogen, which was used as a fluorescent probe, was synthesized and copolymerized with acrylate monomers to study the process of emulsion polymerization and properties of a fluorescent emulsion.

Monte Carlo simulation of the dispersion polymerization of styrene

The Monte Carlo kinetic simulation method was performed to simulate the entire process of the dispersion polymerization of styrene stabilized by polyvinyl pyrrolidone (PVP) in ethanol.

Block copolymer synthesis by controlled/living radical polymerisation in heterogeneous systems

We review the range of CLRP-controlled syntheses of block copolymer particles in dispersed systems, which are being exploited to create new opportunities for the design of nanostructured soft materials.

Celebrating Soft Matter's 10th Anniversary: Influencing the charge of poly(methyl methacrylate) latexes in nonpolar solvents

Sterically-stabilized poly(methyl methacrylate) (PMMA) latexes dispersed in nonpolar solvents are a classic, well-studied system in colloid science. This is because they can easily be synthesized with a narrow size distribution and because they interact essentially as hard spheres. These PMMA latexes can be charged using several methods (by adding surfactants, incorporating ionizable groups, or dispersing in autoionizable solvents), and due to the low relative permittivity of the solvents (εr ≈ 2 for alkanes to εr ≈ 8 for halogenated solvents), the charges have long-range interactions. The number of studies of these PMMA particles as charged species has increased over the past ten years, after few studies immediately following their discovery. A large number of variations in both the physical and chemical properties of the system (size, concentration, surfactant type, or solvent, as a few examples) have been studied by many groups. By considering the literature on these particles as a whole, it is possible to determine the variables that have an effect on the charge of particles. An understanding of the process of charge formation will add to understanding how to control charge in nonaqueous solvents as well as make it possible to develop improved technologically relevant applications for charged polymer nanoparticles.

Fabrication of fluorinated raspberry particles and their use as building blocks for the construction of superhydrophobic films to mimic the wettabilities from lotus leaves to rose petals

Preparation of raspberry-like particles (RPs) and the subsequent fabrication of superhydrophobic films with tunable adhesion derived from fluorinated RPs.

In situ formation of reverse polymeric micelles in liquid alkanes to lodge alcohol micro-droplets

We report the in situ generation of a polymeric micellar solution in non-polar solvent that allows the incorporation of oxygenates into diesel.

Poly(dimethylsiloxane)-stabilized polymer particles from radical dispersion polymerization in nonpolar solvent:influence of stabilizer properties and monomer type [corrected]

Particles used in electrophoretic display applications (EPD) must possess a number of specific properties ranging from stability in a nonaqueous solvent, high reflectivity, low polydispersity, and high charge density to name but a few. The manufacture of such particles is best carried out in the solvent of choice for the EPD. This opens up new interests in the study of nonaqueous dispersion polymerization methods, which deliver polymer particles suspended in low dielectric constant solvents. We explore in this article the use of a poly(dimethylsiloxane) macromonomer for the stabilization of poly(methyl methacrylate) polymer particles in dodecane, a typical solvent of choice for EPDs. The use of this stabilizer is significant for this method as it is directly soluble in the reaction medium as opposed to traditionally used poly(12-hydroxystearic acid)-based stabilizers. Additionally, the present study serves as a baseline for subsequent work, where nonaqueous dispersion polymerization will be used to create polymer particles encapsulating liquid droplets and solid pigment particles. In this article, the influence of the macromonomer molecular weight and concentration on the properties of the synthesized particles is studied. In addition, we investigate the possibility of synthesizing polymer particles from other monomers both as a comonomer for methyl methacrylate and as the only monomer in the process. The influence of macromonomer concentration is also studied throughout all experiments.