Starch-based nano-biocomposites

Combined role of stearic acid and maleic anhydride in the development of thermoplastic starch-based materials with ultrahigh ductility and durability

The diverse properties reported for starch-based materials indicate their potential for use in the preparation of biodegradable flexible actuators. However, their natural brittleness and lack of durability after modification limit their practical application. Therefore, we propose a strategy for preparing flexible starch-based composites. The results of macro/micro property characterizations and molecular dynamics simulations indicated that using starch, maleic anhydride, and stearic acid (SA), the mobility of the starch chains was enhanced and retrogradation was inhibited through the synergistic effects induced by chain breaking, complex formation with SA, and esterification of the starch molecules. In addition, the elongation at break of the modified starch (MS) reached 2070 %, and considerable ductility (>1000 %) as well as well-complexed structure were maintained after six months. Furthermore, the MS was able to undergo self-healing after fracture or a temperature-controlled stiffness transition. Moreover, it underwent complete degradation in soil within 30 d. Finally, an actuator was prepared by doping the MS with nano-Fe3O4 particles to realize a dual magnetic and optical response. Dynamic monitoring was also achieved based on the electrical signal, thereby demonstrating the broad application scope of this material in the development of biodegradable flexible actuators.

Natural polymer starch-based materials for flexible electronic sensor development: A review of recent progress

In response to the burgeoning interest in the development of highly conformable and resilient flexible electronic sensors capable of transducing diverse physical stimuli, this review investigates the pivotal role of natural polymers, specifically those derived from starch, in crafting sustainable and biocompatible sensing materials. Expounding on cutting-edge research, the exploration delves into innovative strategies employed to leverage the distinctive attributes of starch in conjunction with other polymers for the fabrication of advanced sensors. The comprehensive discussion encompasses a spectrum of starch-based materials, spanning all-starch-based gels to starch-based soft composites, meticulously scrutinizing their applications in constructing resistive, capacitive, piezoelectric, and triboelectric sensors. These intricately designed sensors exhibit proficiency in detecting an array of stimuli, including strain, temperature, humidity, liquids, and enzymes, thereby playing a pivotal role in the continuous and non-invasive monitoring of human body motions, physiological signals, and environmental conditions. The review highlights the intricate interplay between material properties, sensor design, and sensing performance, emphasizing the unique advantages conferred by starch-based materials, such as self-adhesiveness, self-healability, and re-processibility facilitated by dynamic bonding. In conclusion, the paper outlines current challenges and future research opportunities in this evolving field, offering valuable insights for prospective investigations.

Value addition of mango kernel for development and characterization of starch with starch nanoparticles for packaging applications

The present research was conducted to explore the potential of mango kernel starch from the Chaunsa variety to develop starch and starch nanoparticles (SNPs) based films. The investigation included starch isolation from mango kernel followed by the preparation of SNPs by acid hydrolysis and a thorough examination of various physicochemical properties for film formation. The properties of SNPs were found to be distinctly different from those of native starch. SNPs exhibited an aggregated form with an irregular surface, whereas native starch had an oval and elongated shape with a smooth surface. X-ray diffraction (XRD) analysis confirmed that the starch type in SNPs was of the A-type. Additionally, the pasting properties of SNPs were minimal due to the acid hydrolysis process. SNP-based composite film was developed with (5 %) SNP concentration added. This successful incorporation of SNPs enhanced biodegradability, with complete degradation occurring within three weeks. Moreover, the composite films displayed increased burst strength, measuring 1303.51 ± 73.7 g, and lower water vapor transmission rates (WVTR) at (7.40 ± 0.50) × 10-3 g per square meter per second and reduced water solubility at 35.32 ± 3.0 %. This development represents a significant advancement in the field of eco-friendly packaging materials.

Preparation and characterization on the eco-friendly corn starch based adhesive of with salient water resistance, mildew resistance

Starch adhesive is a commonly used bonding glue that is sustainable, formaldehyde-free and biodegradable. However, there are obviously some problems related to its high viscosity, poor water and mildew resistance. Hence, exploring a starch-based adhesive with good properties that satisfies the requirements of wood processing presents the context of the current research. Thus, corn starch was used as raw material to form oxidized starch (OCS) via oxidation using sodium periodate, it was reacted with a synthesis polyurea compound that prepared from hexanediamine-urea (HU) obtained by deamination to yield a oxidized starch-hexanediamine-urea adhesive (denoted hereafter as OCSHU). The oxidation process was optimized in terms of oxidant concentration, reaction time and temperature. Furthermore, the impact of HU addition on the mechanical properties of the adhesive was explored. Results indicate adhesive exhibited outstanding shear strength, when 13 % of NaIO4 was used as an oxidant to treat starch at 55 °C for 24 h, and involved in a subsequent reaction with 40 % of HU. The dry shear strength, 24 h cold water strength, 3 h hot water strength and 3 h boiling water strength are 1.84, 1.50, 1.32, and 1.31 MPa. Meantime, OCSHU adhesive solution revealed good storage stability whereas cured resin exhibited mildew resistance. The developed adhesive is a simple and green biomass wood adhesive.

Biodegradable Biocomposite of Starch Films Cross-Linked with Polyethylene Glycol Diglycidyl Ether and Reinforced by Microfibrillated Cellulose

Biopolymers are biodegradable and renewable and can significantly reduce environmental impacts. For this reason, biocomposites based on a plasticized starch and cross-linker matrix and with a microfibrillated OCC cardboard cellulose reinforcement were developed. Biocomposites were prepared by suspension casting with varied amounts of microfibrillated cellulose: 0, 4, 8, and 12 wt%. Polyethylene glycol diglycidyl ether (PEGDE) was used as a cross-linking, water-soluble, and non-toxic agent. Microfibrillated cellulose (MFC) from OCC cardboard showed appropriate properties and potential for good performance as a reinforcement. In general, microfiber incorporation and matrix cross-linking increased crystallization, reduced water adsorption, and improved the physical and tensile properties of the plasticized starch. Biocomposites cross-linked with PEGDE and reinforced with 12 wt% MFC showed the best properties. The chemical and structural changes induced by the cross-linking of starch chains and MFC reinforcement were confirmed by FTIR, NMR, and XRD. Biodegradation higher than 80% was achieved for most biocomposites in 15 days of laboratory compost.

Performance of Recycled Polylactic Acid/Amorphous Polyhydroxyalkanoate Blends

Blends of polylactic acid (PLA) with amorphous polyhydroxyalkanoate (aPHA) are less brittle than neat PLA, thus enabling their use as biodegradable packaging. This work investigated the impact of recycling on the properties of neat PLA and PLA/aPHA blends with 90 and 75 wt. % PLA. After the materials were subjected to five heat histories in a single-screw extruder, the mechanical, rheological, and thermal properties were measured. All recycled compounds with 100% PLA and 75% PLA had similar decomposition behavior, whereas the decomposition temperatures for the blends with 90% PLA decreased with each additional heat cycle. The glass transition and melting temperatures were not impacted by reprocessing, but the crystallinity increased with more heat cycles. The complex viscosity of the reprocessed PLA and PLA/aPHA blends was much lower than for the neat PLA and increasing the number of heat cycles produced smaller reductions in the complex viscosity of 100% PLA and the blend with 90% PLA; no change in complex viscosity was observed for blends with 75% PLA exposed to 2 to 5 heat cycles. The tensile properties were not affected by reprocessing, whereas the impact strength for the 75% PLA blend decreased with reprocessing. These properties suggest that users will be able to incorporate scrap into the neat resin for thermoformed packaging.

Eco-Friendly, Biodegradable Starch-Based Packaging Materials with Antioxidant Features

Due to the extensive application of petroleum-based plastics as packaging materials and problems related to their degradation/recycling, developing new solutions in the field of novel biopolymer-based materials has become imperative. Natural substitutes for synthetic polymers (starch, cellulose, chitosan) require modifications that enable their processing and provide them with additional properties (i.e., mechanical strength, controlled biodeterioration, antimicrobial and antioxidative activity). The antioxidant activity of natural packaging materials still requires further investigation. In this research paper, novel materials used for packaging perishable food susceptible to oxidizing agents were designed from potato starch (NS) reinforced with antioxidants such as dialdehyde starch (DS) and caffeic acid (CA)/quinic acid (QA). The use of spectroscopic techniques (ATR-FTIR, Raman) and X-ray diffraction allowed the examination of the chemical structure and arrangement of the blend and confirmed the component interactions. The film surface was examined by AFM. DS, functioning as a cross-linker, enhanced the film barrier as well as the mechanical and thermal properties, and it promoted starch amorphization when blended with other antioxidants. The antioxidant activity of caffeic acid was greater than that of quinic acid. Dialdehyde starch improves elasticity, whereas acids (particularly caffeic acid) influence film stiffness. A high susceptibility to biodegradation is valuable for potential eco-friendly packaging applications.

Multifunctional Ti3C2Tx MXene-reinforced thermoplastic starch nanocomposites for sustainable packaging solutions

Starch-derived films exhibit significant potential for packaging applications owing to their low cost, biodegradable characteristics, and natural abundance. Nonetheless, there is a demand to enhance their mechanical properties and moisture resistance to broaden their use. In this study, high performing sorbitol-plasticized starch/Ti3C2Tx MXene nanocomposites, reinforced with ultra-low filler contents, were fabricated for the first time in literature. The MXene nanoplatelets were well-dispersed within the starch matrix while there was a tendency for the fillers to align in-plane, as revealed by polarized Raman spectroscopy. The produced nanocomposite films demonstrate remarkable effectiveness in blocking UV light, offering an additional valuable attribute in food packaging. The Young's modulus and tensile strength of starch films containing 0.75 wt% MXene increased from 439.9 and 11.0 MPa to 764.3 and 20.8 MPa, respectively. The introduction of 1 wt% MXene nanoplatelets reduced the water vapour permeability of starch films from 2.78 × 10-7 to 1.80 × 10-7 g/m h Pa due to the creation of highly tortuous paths for water molecules. Micromechanical theories were also implemented to understand further the reinforcing mechanisms in the biobased nanocomposites. The produced starch nanocomposites not only capitalize on the biodegradable and renewable nature of starch but also harness the unique properties of nanomaterials, paving the way for sustainable and high-performance packaging solutions that align with both consumer and environmental demands.

Pioneering a paradigm shift in tissue engineering and regeneration with polysaccharides and proteins-based scaffolds: A comprehensive review

In the realm of modern medicine, tissue engineering and regeneration stands as a beacon of hope, offering the promise of restoring form and function to damaged or diseased organs and tissues. Central to this revolutionary field are biological macromolecules-nature's own blueprints for regeneration. The growing interest in bio-derived macromolecules and their composites is driven by their environmentally friendly qualities, renewable nature, minimal carbon footprint, and widespread availability in our ecosystem. Capitalizing on these unique attributes, specific composites can be tailored and enhanced for potential utilization in the realm of tissue engineering (TE). This review predominantly concentrates on the present research trends involving TE scaffolds constructed from polysaccharides, proteins and glycosaminoglycans. It provides an overview of the prerequisites, production methods, and TE applications associated with a range of biological macromolecules. Furthermore, it tackles the challenges and opportunities arising from the adoption of these biomaterials in the field of TE. This review also presents a novel perspective on the development of functional biomaterials with broad applicability across various biomedical applications.

Optimizing biodegradable plastics: Molecular dynamics insights into starch plasticization with glycerol and oleic acid

Petroleum-based plastics dominate everyday life, necessitating the exploration of natural polymers as alternatives. Starch, abundant and biodegradable, is a promising raw material. However, understanding the molecular mechanisms underlying starch plasticization has proven challenging. To address this, we employ molecular dynamics simulations, focusing on amylose as a model. Our comprehensive evaluation revealed that chain size affects solubility, temperature influenced diffusivity and elastic properties, and oleic acid expressed potential as an alternative plasticizer. Furthermore, blending glycerol or oleic acid with water suggested the enhancement amylose's elasticity. These findings contribute to the design of sustainable and improved biodegradable plastics.

Metal nanoparticles and carbohydrate polymers team up to improve biomedical outcomes

The convergence of carbohydrate polymers and metal nanoparticles (MNPs) holds great promise for biomedical applications. Researchers aim to exploit the capability of carbohydrate matrices to modulate the physicochemical properties of MNPs, promote their therapeutic efficiency, improve targeted drug delivery, and enhance their biocompatibility. Therefore, understanding various attributes of both carbohydrates and MNPs is the key to harnessing them for biomedical applications. The many distinct types of carbohydrate-MNP systems confer unique capabilities for drug delivery, wound healing, tissue engineering, cancer treatment, and even food packaging. Here, we introduce distinct physicochemical/biological properties of carbohydrates and MNPs, and discuss their potentials and shortcomings (alone and in combination) for biomedical applications. We then offer an overview on carbohydrate-MNP systems and how they can be utilized to improve biomedical outcomes. Last but not least, future perspectives toward the application of such systems are highlighted.

Diminishment the gas permeability of polyethylene by "densification" of the amorphous regions

High-density polyethylene/paraffin wax (HDPE/wax) systems with adjustable density of the amorphous regions were prepared by a melt-blending process to optimize/control the final oxygen barrier properties. The introduction of paraffin wax (a low molecular weight modifier) is the key to tune the gas permeability properties of polyethylene-based materials. Density gradient column (DGC) measurements distinctly showed that the incorporation of modifier led to densification of the amorphous phase of semicrystalline HDPE consisting in a decrease in the average fractional free volume confirmed by positron annihilation lifetime spectroscopy (PALS). Polyethylene with "densified" amorphous phase exhibits lower oxygen permeability parameters compared to pristine polyethylene, but it is characterized by similar thermal and thermomechanical properties. An increase in the density of the amorphous regions of polyethylene by about 0.003 g/cm3, which corresponds to 0.3%, reduces the permeability of oxygen by up to 22%. For the first time, it has been proven that by controlling the density of the amorphous regions of semicrystalline polymers, it is possible to obtain materials with appropriate transport properties (without changing other properties) for applications meeting specific requirements.

Thermoplastic Starch Biocomposite Films Reinforced with Nanocellulose from Agave tequilana Weber var. Azul Bagasse

In this work, cellulose nanocrystals (CNCs), bleached cellulose nanofibers (bCNFs), and unbleached cellulose nanofibers (ubCNFs) isolated by acid hydrolysis from Agave tequilana Weber var. Azul bagasse, an agro-waste from the tequila industry, were used as reinforcements in a thermoplastic starch matrix to obtain environmentally friendly materials that can substitute contaminant polymers. A robust characterization of starting materials and biocomposites was carried out. Biocomposite mechanical, thermal, and antibacterial properties were evaluated, as well as color, crystallinity, morphology, rugosity, lateral texture, electrical conductivity, chemical identity, solubility, and water vapor permeability. Pulp fibers and nanocelluloses were analyzed via SEM, TEM, and AFM. The water vapor permeability (WVP) decreased by up to 20.69% with the presence of CNCs. The solubility decreases with the presence of CNFs and CNCs. The addition of CNCs and CNFs increased the tensile strength and Young's modulus and decreased the elongation at break. Biocomposites prepared with ubCNF showed the best tensile mechanical properties due to a better adhesion with the matrix. Images of bCNF-based biocomposites demonstrated that bCNFs are good reinforcing agents as the fibers were dispersed within the starch film and embedded within the matrix. Roughness increased with CNF content and decreased with CNC content. Films with CNCs did not show bacterial growth for Staphylococcus aureus and Escherichia coli. This study offers a new theoretical basis since it demonstrates that different proportions of bleached or unbleached nanofibers and nanocrystals can improve the properties of starch films.

Sodium Trimetaphosphate Crosslinked Starch Films Reinforced with Montmorillonite

Synthetic polymers are the main food packaging material, although they are nonbiodegradable and their recycling process is expensive. A biodegradable, eco-friendly material, with high availability and low cost, such as starch, is a promising solution for the production of films for food packaging. To enhance starch film mechanical and barrier properties, nanoclays have been incorporated within the film matrix. Crosslinking is a well-established method to modify starch properties, but it has not been investigated in combination with nanoclay addition. In the present study, films were developed with starch that was crosslinked through the addition of 5, 15, and 40% wt. sodium trimetaphosphate (STMP) based on dry starch weight. To investigate the interaction between crosslinking and nanoclay addition, montmorillonite (MMT) was added at a 10.5% wt. concentration based on dry starch weight. Experimental data revealed a synergistic effect between STMP crosslinking and MMT addition regarding film thickness, elongation at break, color properties, and opacity. Regarding barrier properties, MMT addition negated the effect of STMP crosslinking, while, in the case of moisture content, it did not alter the effect of STMP crosslinking. Finally, in the case of tensile strength, a synergistic effect followed by a negative interaction was observed. In conclusion, the addition of MMT can potentially enhance, alongside crosslinking, some properties of the films, while other properties are not affected any more than just by crosslinking.

Biosynthesis, characterization, and investigation of antimicrobial and cytotoxic activities of silver nanoparticles using Solanum tuberosum peel aqueous extract

Metallic nanoparticle biosynthesis is thought to offer opportunities for a wide range of biological uses. The green process of turning biological waste into utilizable products gaining attention due to its economical and eco-friendly approach in recent years. This study reported the ability of Solanum tuberosum (ST) peel extract to the green synthesis of non-toxic, stable, small-sized silver nanoparticles without any toxic reducing agent utilizing the phytochemical components present in its structure. UV-visible spectroscopy, X-ray diffraction analysis, Fourier transform infrared spectroscopy, flourier scanning electron microscopy, atomic force microscopy, transmission electron microscopy, and energy dispersive analysis X-ray confirmed the biosynthesis and characterization of silver nanoparticles. Also, dynamic light scattering and thermogravimetric analyses showed stable synthesized nanoparticles. The antibacterial activity of the biosynthesized silver nanoparticles was evaluated against four different bacterial strains, Escherichia coli (E. coli), Pseudomonas aeruginosa (P. aeruginosa), Staphylococcus aureus (S. aureus) Bacillus subtilis (B. subtilis), and a yeast, Candida albicans (C. albicans) using the minimum inhibitory concentration technique. The cytotoxic activities were determined against Human dermal fibroblast (HDF), glioblastoma (U118), colorectal adenocarcinoma (CaCo-2), and human ovarian (Skov-3) cell lines cancer cells using MTT test. The nanoparticle capping agents that could be involved in the reduction of silver ions to Ag NPs and their stabilization was identified using FTIR. Nanoparticles were spherical in shape and had a size ranging from 3.91 to 27.07 nm, showed crystalline nature, good stability (-31.3 mV), and the presence of capping agents. ST-Ag NPs significantly decreased the growth of bacterial strains after treatment. The in vitro analysis showed that the ST-Ag NPs demonstrated dose-dependent cytotoxicity against cell lines. Based on the data, it is feasible to infer that biogenic Ag NPs were capped with functional groups and demonstrated considerable potential as antibacterial and anticancer agents for biomedical and industrial applications.

Multimodal Biomedical Implant with Plasmonic and Simulated Body Temperature Responses

This work presents a novel nanoparticle-based thermosensor implant able to reveal the precise temperature variations along the polymer filaments, as it contracts and expands due to changes in the macroscale local temperature. The multimodal device is able to trace the position and the temperature of a polypropylene mesh, employed in abdominal hernia repair, by combining plasmon resonance and Raman spectroscopy with hydrogel responsive system. The novelty relies on the attachment of the biocompatible nanoparticles, based on gold stabilized by a chitosan-shell, already charged with the Raman reporter (RaR) molecules, to the robust prosthesis, without the need of chemical linkers. The SERS enhanced effect observed is potentiated by the presence of a quite thick layer of the copolymer (poly(N-isopropylacrylamide)-co-poly(acrylamide)) hydrogel. At temperatures above the LCST of PNIPAAm-co-PAAm, the water molecules are expulsed and the hydrogel layer contracts, leaving the RaR molecules more accessible to the Raman source. In vitro studies with fibroblast cells reveal that the functionalized surgical mesh is biocompatible and no toxic substances are leached in the medium. The mesh sensor opens new frontiers to semi-invasive diagnosis and infection prevention in hernia repair by using SERS spectroscopy. It also offers new possibilities to the functionalization of other healthcare products.

Biopolymer Based Multifunctional Films Loaded with Anthocyanin Rich Floral Extract and ZnO Nano Particles for Smart Packaging and Wound Healing Applications

There are significant societal repercussions from our excessive use of plastic products derived from petroleum. In response to the increasing environmental implications of plastic wastes, biodegradable materials have been proven to be an effective means of mitigating environmental issues. Therefore, protein- and polysaccharide-based polymers have gained widespread attention recently. In our study, for increasing the strength of a biopolymer (Starch), we used ZnO dispersed nanoparticles (NPs), which resulted in the enhancement of other functional properties of the polymer. The synthesized NPs were characterized using SEM, XRD, and Zeta potential values. The preparation techniques are completely green, with no hazardous chemicals employed. The floral extract employed in this study is Torenia fournieri (TFE), which is prepared using a mixture of ethanol and water and possesses diverse bioactive features and pH-sensitive characteristics. The prepared films were characterized using SEM, XRD, FTIR, contact angle and TGA. The incorporation of TFE and ZnO (SEZ) NPs was found to increase the overall nature of the control film. The results obtained from this study confirmed that the developed material is suitable for wound healing and can also be used as a smart packaging material.

Recent advances and future challenges of the starch-based bio-composites for engineering applications

Starch is regarded as one of the most promising sustainable materials due to its abundant yield and excellent biodegradability. From the perspective of practical engineering applications, this paper systematically describes the development of starch-based bio-composites in the past decade. Packaging properties, processing characteristics, and current challenges for the efficient processing of starch-based bio-composites are reviewed in industrial packaging. Green coatings, binders, adsorbents, flocculants, flame retardants, and emulsifiers are used as examples to illustrate the versatility of starch-based bio-composites in chemical agent applications. In addition, the work compares the application of starch-based bio-composites in conventional spinning with emerging spinning technologies and describes the challenges of electrostatic spinning for preparing nanoscale starch-based fibers. In terms of flexible electronics, the starch-based bio-composites are regard as a solid polymer electrolyte and easily modified porous material. Moreover, we describe the applications of the starch-based gels in tissue engineering, controlled drug release, and medical dressings. Finally, the theoretical input and technical guidance in the advanced sustainable engineering application of the starch-based bio-composites are provided in the work.

A Biodegradable, Waterproof, and Thermally Processable Cellulosic Bioplastic Enabled by Dynamic Covalent Modification

The growing environmental concern over petrochemical-based plastics continuously promotes the exploration of green and sustainable substitute materials. Compared with petrochemical products, cellulose has overwhelming superiority in terms of availability, cost, and biodegradability; however, cellulose's dense hydrogen-bonding network and highly ordered crystalline structure make it hard to be thermoformed. A strategy to realize the partial disassociation of hydrogen bonds in cellulose and the reassembly of cellulose chains via constructing a dynamic covalent network, thereby endowing cellulose with thermal processability as indicated by the observation of a moderate glass transition temperature (T_g  = 240 °C), is proposed. Moreover, the cellulosic bioplastic delivers a high tensile strength of 67 MPa, as well as excellent moisture and solvent resistance, good recyclability, and biodegradability in nature. With these advantageous features, the developed cellulosic bioplastic represents a promising alternative to traditional plastics.

Main Characteristics of Processed Grain Starch Products and Physicochemical Features of the Starches from Maize (Zea mays L.) with Different Genotypes

To understand the relationship between the genotype of maize plants and differences in their origin and the ploidy of the genome, which carry gene alleles programming the biosynthesis of various starch modifications, the thermodynamic and morphological features of starches from the grains of these plants have been studied. This study investigated the peculiarities of starch extracted from subspecies of maize (the dry matter mass (DM) fraction, starch content in grain DM, ash content in grain DM, and amylose content in starch) belonging to different genotypes within the framework of the program for the investigation of polymorphism of the world collection of plant genetic resources VIR. Among the starch genotypes of maize studied, four groups comprised the waxy (wx), conditionally high amylose ("ae"), sugar (su), and wild (WT) genotypes. Starches with an amylose content of over 30% conditionally belonged to the "ae" genotype. The starches of the su genotype had fewer starch granules than other investigated genotypes. An increase in amylose content in the investigated starches, accompanied by a decrease in their thermodynamic melting parameters, induced the accumulation of defective structures in the starches under study. The thermodynamic parameters evaluated for dissociation of the amylose-lipid complex were temperature (T_aml) and enthalpy (H_aml); for the su genotype, temperature and enthalpy values of dissociation of the amylose-lipid complex were higher than in the starches from the "ae" and WT genotypes. This study has shown that the amylose content in starch and the individual features of the maize genotype determine the thermodynamic melting parameters of the starches under study.

Effect of polybutylene adipate terephthalate on the properties of starch/polybutylene adipate terephthalate shape memory composites

In this work, the starch/polybutylene adipate terephthalate (PBAT) composite films with high starch content were prepared by hot-pressing and ultraviolet cross-linking methods using cassava starch, benzophenone (BP), degradable PBAT and citric acid as film-forming substrate, photosensitizer, toughening material and solvent, respectively. The results showed that starch and PBAT had excellent performance, resulting in the composites films exhibit robust tensile strength (9.90 MPa), decent elongation at break (500.05 %) and excellent shape memory property. Under 30 % pre-tensile strain, the shape memory fixity and recovery ratios reached 96.58 % and 93.94 %, respectively. In addition, the starch-based films were successfully rendered hydrophobic by PBAT hydrophobic characteristics. PBAT not only secures the biodegradability of the starch/PBAT composites films, but also improves the mechanical properties of them, and meets the requirements of the thermal shrinkage films when subjected to large strain.

Barley thermoplastic starch nanocomposite films reinforced with nanocellulose

Despite being one of the starch producers, barley has yet to be widely studied for thermoplastic starch applications, including nanocellulose thermoplastic composites, due to its uses in the food and beverage industries. However, only 20% of barley is used in the malting industry to produce both alcoholic and non-alcoholic beverages, and 5% is used as an ingredient in a wide variety of foods. As the fourth most important cereal in the world after wheat, corn, and rice, barley can be considered an interesting biomass source to produce biodegradable thermoplastics, stemming from its starch constitution. Therefore, this review attempts to highlight the barley starch properties and its potential utilization for nanocellulose thermoplastic starch composites. Several studies involving barley-based starch in thermoplastic production and nanocellulose reinforcement for properties enhancement are also reviewed, particularly in the attempt to provide various options to reduce and replace the uses of harmful petroleum-based plastic.

Structure of Starch-Sepiolite Bio-Nanocomposites: Effect of Processing and Matrix-Filler Interactions

Sepiolite clay is a natural filler particularly suitable to be used with polysaccharide matrices (e.g., in starch-based bio-nanocomposites), increasing their attractiveness for a wide range of applications, such as packaging. Herein, the effect of the processing (i.e., starch gelatinization, addition of glycerol as plasticizer, casting to obtain films) and of the sepiolite filler amount on the microstructure of starch-based nanocomposites was investigated by SS-NMR (solid-state nuclear magnetic resonance), XRD (X-ray diffraction) and FTIR (Fourier-transform infrared) spectroscopy. Morphology, transparency and thermal stability were then assessed by SEM (scanning electron microscope), TGA (thermogravimetric analysis) and UV-visible spectroscopy. It was demonstrated that the processing method allowed to disrupt the rigid lattice structure of semicrystalline starch and thus obtain amorphous flexible films, with high transparency and good thermal resistance. Moreover, the microstructure of the bio-nanocomposites was found to intrinsically depend on complex interactions among sepiolite, glycerol and starch chains, which are also supposed to affect the final properties of the starch-sepiolite composite materials.

Synthesis and Characterization of Eco-Friendly Bio-Composite from Fenugreek as a Natural Resource

The present study show the usability of starch (tamarind) based-bio-composite film reinforced by fenugreek by various percentages to replace the traditional petrochemical plastics. The prepared bio-composite films were systematically characterized using the universal testing machine (UTM), soil degradation, scanning electron microscope (SEM), X-ray diffraction (XRD), thermogravimetric analyzer (TGA), and antibacterial tests. The experiments showed that a lower percentage of fenugreek improves biodegradation and mechanical strength. More than 60% of biodegradation occurred in only 30 days. Almost 3 N/mm² tensile strength and 6.5% tensile strain were obtained. The presence of micropores confirmed by SEM images may accelerate the biodegradation process. Antibacterial activity was observed with two samples of synthesized bio-composite, due to photoactive compounds confirmed by FTIR spectra. The glass transition temperature was shown to be higher than the room temperature, with the help of thermal analysis. The prepared bio-composite containing 5% and 10% fenugreek showed antibacterial activities.

The Effect of Surface Characteristics of Clays on the Properties of Starch Nanocomposites

In this research, different clays such as laponite and montmorillonite (NaMMT) are used as fillers in the preparation of thermoplastic starch/clay nanocomposites. Thin films are produced by casting and evaporation in a wide composition range, using glycerol as the plasticizer at two different concentrations. The surface energy of clay fillers is measured by inverse gas chromatography (IGC); X-ray diffraction (XRD) and light transmission measurements (UV-VIS) are carried out to characterize the structure of nanocomposites; and mechanical properties and water vapor permeability are also studied. While all the starch/montmorillonite nanocomposites possess intercalated structures, significant exfoliation can be noted in the starch/laponite nanocomposites, mainly at low clay contents. Due to the larger surface energy of montmorillonite, stronger polymer/clay interactions and better mechanical properties can be assumed in starch/NaMMT composites. The smaller surface energy of laponite, however, can facilitate the delamination of laponite layers. Thus, the specific surface area of laponite can be further increased by exfoliation. Based on the results, the better exfoliation and the much larger specific surface area of laponite lead to higher reinforcement in starch/laponite nanocomposites.

Chitosan-Gelatin Films: Plasticizers/Nanofillers Affect Chain Interactions and Material Properties in Different Ways

Biopolymers, which are biodegradable and inherently functional, have high potential for specialized applications (e.g., disposable and transient systems and biomedical treatment). For this, it is important to create composite materials with precisely defined chain interactions and tailored properties. This work shows that for a chitosan–gelatin material, both glycerol and isosorbide are effective plasticizers, but isosorbide could additionally disrupt the polyelectrolyte complexation (PEC) between the two biopolymers, which greatly impacts the glass transition temperature (T_g), mechanical properties, and water absorption. While glycerol-plasticized samples without nanofiller or with graphene oxide (GO) showed minimal water uptake, the addition of isosorbide and/or montmorillonite (MMT) made the materials hydrolytically unstable, likely due to disrupted PEC. However, these samples showed an opposite trend in surface hydrophilicity, which means surface chemistry is controlled differently from chain structure. This work highlights different mechanisms that control the different properties of dual-biopolymer systems and provides an updated definition of biopolymer plasticization, and thus could provide important knowledge for the future design of biopolymer composite materials with tailored surface hydrophilicity, overall hygroscopicity, and mechanical properties that meet specific application needs.

Thermal, flammability, and antimicrobial properties of arrowroot (Maranta arundinacea) fiber reinforced arrowroot starch biopolymer composites for food packaging applications

Using the solution casting method, a novel biodegradable thermoplastic arrowroot (Maranta arundinacea) starch (TPAS) films containing arrowroot fiber (AF) at different concentrations (0, 2, 4, 6, 8, and 10 wt%) were developed and characterized in terms of thermal, antibacterial activity, water vapor permeability (WVP), biodegradability, and light transmittance properties. The TPAS/AF-10 biocomposite film revealed a higher degradation temperature (313.02 °C) than other biocomposite films, indicating better thermal stability. Furthermore, increasing AF concentration led to a significant (p < 0.05) reduction in the linear burning rate and WVP of the biocomposite films from 248.9 to 115.2 mm/min and 8.18 × 10^-10 ×g. s^-1.m^-1. Pa^-1 to 5.20 × 10^-10 ×g. s^-1.m^-1. Pa^-1, respectively. The addition of fibers in the surface structure had a significant impact on remarkable drop in opacity (91.1 to 74.1%). In addition, the incorporation of AF and control film showed an insignificant effect against three pathogenic bacteria, including Staphylococcus aureus (ATCC 43300), Escherichia coli (ATCC 25922), and Bacillus subtilis (B29). The soil burial findings demonstrated that the weight loss of TPAS/AF biocomposite films was significantly higher than TPAS film. Overall, the reinforcement of arrowroot fiber with TPAS film improved the properties of biocomposites for environmentally friendly food packaging applications.

Strengthening and Toughening of Protein-Based Thermosets via Intermolecular Self-Assembly

As proteins are abundant polymers in biomass sources such as agricultural feedstocks and byproducts, leveraging them to develop alternatives to synthetic polymers is of great interest. However, the mechanical performance of protein materials is not suitable for most target applications. Constructing copolymers with proteins as hard domains and rubbery polymers as soft domains has been shown to be a promising strategy for improving mechanical properties. Herein, it is demonstrated that toughening and strengthening of protein copolymers can be advanced further by thermal treatment, leading to mechanical enhancements that generalize across a variety of different protein feedstocks, including whey, serum, soy, and pea proteins. The thermal treatment induces a rearrangement of protein structure, leading to the formation of intermolecular β-sheets. The ordered intermolecular structures in the hard domains of thermosets greatly improve their mechanical properties, providing simultaneous increases in strength, toughness, and modulus, with little sacrifice in fracture strain. Analogous to crystalline structures, the formation of intermolecular β-sheet structures also leads to reduced hygroscopicity. This is a valuable contribution, as practical applications of natural polymer-based plastics are frequently hindered by the materials' humidity sensitivity. Therefore, this work demonstrates a simple yet versatile strategy to improve the materials' performance from a wide range of protein feedstocks, as well as signifies the implications of protein structural assembly in materials design.

Starch as a Matrix for Incorporation and Release of Bioactive Compounds: Fundamentals and Applications

Due to its abundance in nature and low cost, starch is one of the most relevant raw materials for replacing synthetic polymers in a number of applications. It is generally regarded as non-toxic, biocompatible, and biodegradable and, therefore, a safe option for biomedical, food, and packaging applications. In this review, we focused on studies that report the use of starch as a matrix for stabilization, incorporation, or release of bioactive compounds, and explore a wide range of applications of starch-based materials. One of the key application areas for bioactive compounds incorporated in starch matrices is the pharmaceutical industry, especially in orally disintegrating films. The packaging industry has also shown great interest in using starch films, especially those with antioxidant activity. Regarding food technology, starch can be used as a stabilizer in nanoemulsions, thus allowing the incorporation of bioactive compounds in a variety of food types. Starch also presents potential in the cosmetic industry as a delivery system. However, there are still several types of industry that could benefit from the incorporation of starch matrices with bioactive compounds, which are described in this review. In addition, the use of microbial bioactive compounds in starch matrices represents an almost unexplored field still to be investigated.

Applications of Starch Biopolymers for a Sustainable Modern Agriculture

Protected cultivation in modern agriculture relies extensively on plastic-originated mulch films, nets, packaging, piping, silage, and various applications. Polyolefins synthesized from petrochemical routes are vastly consumed in plasticulture, wherein PP and PE are the dominant commodity plastics. Imposing substantial impacts on our geosphere and humankind, plastics in soil threaten food security, health, and the environment. Mismanaged plastics are not biodegradable under natural conditions and generate problematic emerging pollutants such as nano-micro plastics. Post-consumed petrochemical plastics from agriculture face many challenges in recycling and reusing due to soil contamination in fulfilling the zero waste hierarchy. Hence, biodegradable polymers from renewable sources for agricultural applications are pragmatic as mitigation. Starch is one of the most abundant biodegradable biopolymers from renewable sources; it also contains tunable thermoplastic properties suitable for diverse applications in agriculture. Functional performances of starch such as physicomechanical, barrier, and surface chemistry may be altered for extended agricultural applications. Furthermore, starch can be a multidimensional additive for plasticulture that can function as a filler, a metaphase component in blends/composites, a plasticizer, an efficient carrier for active delivery of biocides, etc. A substantial fraction of food and agricultural wastes and surpluses of starch sources are underutilized, without harnessing useful resources for agriscience. Hence, this review proposes reliable solutions from starch toward timely implementation of sustainable practices, circular economy, waste remediation, and green chemistry for plasticulture in agriscience

Sustainable Natural Bio-Origin Materials for Future Flexible Devices

Flexible devices serve as important intelligent interfaces in various applications involving health monitoring, biomedical therapies, and human-machine interfacing. To address the concern of electronic waste caused by the increasing usage of electronic devices based on synthetic polymers, bio-origin materials that possess environmental benignity as well as sustainability offer new opportunities for constructing flexible electronic devices with higher safety and environmental adaptivity. Herein, the bio-source and unique molecular structures of various types of natural bio-origin materials are briefly introduced. Their properties and processing technologies are systematically summarized. Then, the recent progress of these materials for constructing emerging intelligent flexible electronic devices including energy harvesters, energy storage devices, and sensors are introduced. Furthermore, the applications of these flexible electronic devices including biomedical implants, artificial e-skin, and environmental monitoring are summarized. Finally, future challenges and prospects for developing high-performance bio-origin material-based flexible devices are discussed. This review aims to provide a comprehensive and systematic summary of the latest advances in the natural bio-origin material-based flexible devices, which is expected to offer inspirations for exploitation of green flexible electronics, bridging the gap in future human-machine-environment interactions.

Thermoplastic starch nanocomposites: sources, production and applications - a review

The development of materials based on thermoplastic starch (TPS) is an excellent alternative to replace or reduce the use of petroleum-derived polymers. The abundance, renewable origin, biodegradability, biocompatibility, and low cost of starch are among the advantages related to the application of TPS compared to other thermoplastic biopolymers. However, through the literature review, it was possible to observe the need to improve some properties, to allow TPS to replace commonly used polyolefins. The studies reviewed achieved these modifications were achieved by using plasticizers, adjusting processing conditions, and incorporating fillers. In this sense, the addition of nanofillers proved to be the main modification strategy due to the large number of available nanofillers and the low charge concentration required for such improvement. The improvement can be seen in thermal, mechanical, electrical, optical, magnetic, antimicrobial, barrier, biocompatibility, cytotoxicity, solubility, and swelling properties. These modification strategies, the reviewed studies described the development of a wide range of materials. These are products with great potential for targeting different applications. Thus, this review addresses a wide range of essential aspects in developing of this type of nanocomposite. Covering from starch sources, processing routes, characterization methods, the properties of the obtained nanocomposites, to the various applications. Therefore, this review will provide an overview for everyone interested in working with TPS nanocomposites. Through a comprehensive review of the subject, which in most studies is done in a way directed to a specific area of study.

Isosorbide plasticized corn starch filled with poly(3-hydroxybutyrate-co-3-hydroxyvalerate) microparticles: Properties and behavior under environmental factors

In this work, new green and fully biodegradable composites, based on corn starch, plasticized with two different amounts of isosorbide and filled by poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) microparticles, were obtained by melt processing. The analysis of their morphologies, crystallinity, structural interactions and dynamomechanical properties as well as the evaluation of their moisture resistance and biodegradability in soil, were performed in function of the plasticizer and/or microparticle amount. The analysis of morphology, crystallinity and structural interactions showed that the plasticization process was completed under the melting processing conditions used. The microparticles were homogeneously dispersed in the thermoplastic starch matrix without suffering any deformation or breaking during the processing. Biocomposites with adequate storage modulus values were obtained, especially the TPS plasticized with 35% of isosorbide and filled with 5 wt% of PHBV microparticles. The incorporation of PHBV microparticles leads to biocomposites with higher moisture resistance. All the biocomposites were completely biodegraded in soil in a short period of time. The performed study demonstrated that these biocomposites could be used for applications in the packaging industry.

Quality assessment of lemon (Citrus aurantifolia, swingle) coated with self-healed multilayer films based on chitosan/carboxymethyl cellulose under cold storage conditions

The polyelectrolyte multilayer self-healing coating film of chitosan and carboxymethyl cellulose (PEM-SH) tended to maintain high sensory quality and control physiological and pathological decay of lemon fruits under cold storage. The PEM-SH film was characterized by ATR-IR, XRD, X-ray photoelectron spectroscopy, SEM analysis, swelling ratio, self-healing, and mechanical characteristics. The 3-layered film (3L) exhibited the optimum barrier properties; WVP: 3.32 ± 0.06 g. mm. k Pa^-1.h^-1.m^-2 and GTR: 0.256 ± 0.032 cc.M^-2.day^-1. The moisture sorption isotherm data were fitted with BET, GAB, and Peleg models and three models showed applicability. The coated fruits exhibit superior features of fruit quality such as reduced weight loss %, respiration rate, and decay symptoms appearance. The 3L-coated fruit showed the lower pectinase enzyme activity (0.689 Ug^-1 FW) up to 60 days. As well as, increased total soluble solids, keeping vitamin C of loss and decreasing percentage acidity of juice up to 60 days.

Study of the water sorption and barrier performances of potato starch nano-biocomposites based on halloysite nanotubes

The barrier performances, in terms of water vapor sorption properties, gas and water barrier performances were analyzed on different starch-based nano-biocomposites. These multiphase systems were elaborated by melt blending starch and halloysite nanotubes at different contents with different plasticizers (glycerol, sorbitol and a mix of both polyols). The influence of the composition was investigated onto the structure, morphology, water sorption and barrier performances. As recently reported, halloysite nanoclay is a promising clay to enhance the properties of plasticized starch matrix. The barrier performances of nanofilled starch-based films were examined through gas and water permeabilities, diffusivity and water affinity. Glycerol-plasticized starch films give fine and more homogeneous nanofiller dispersion with good interfacial interactions, compared to sorbitol ones (alone or mixed), due to stronger and more stable hydrogen bonds. Tortuosity effects linked to the halloysite nanotubes were evidenced by gas transfer analysis, and exacerbated by the good interactions at interfaces and the resulting good filler dispersion. The influence of morphology and interfacial interactions towards water affinity was highlighted by moisture barrier properties. This was a key factor on the reduction of water diffusion and uptake with nanoclay content. A preferential water transfer was observed as a function of a plasticizer type in relation with the phenomenon of water plasticization in the nanocomposite systems.

Modelling and assessment of plasticizer migration and structure changes in hydrophobic starch-based films

The structures of starch and starch-based materials determine additives migration from material matrix. Propionylated starch derived from waxy, normal, G50 and G80 starch were selected as the matrix, the amylose effect on plasticizer (triacetin) migration as well as structural changes in hydrophobic starch-based films were discussed. The constant (k₁) of first-order rate and initial release rate (V₀) of triacetin migration were consistent with the increment of amylose content. Meanwhile, diffusion model disclosed that Fick's second law was apposite to characterize the short-term migration of triacetin, and larger diffusion coefficient (D) values of short- and long-term migration were also found in films with higher amylose content, indicating that amylose-formed structures were in favor of triacetin migration. In comparison of propionylated amylopectin, Van der Waals's interactions between propionylated amylose and triacetin were easier to be weakened with the migration of triacetin, which promoted the decrease of wavenumber of C-O-C, and enlarged the inter-planner spacing of crystalline structures, promoting the formation of amorphous structures and wrinkles and embossments in films with higher amylose content. This work confirmed that regulating the structures of starch were effective to control the migration behavior of additives from starch-based films.

Progress in Starch-Based Materials for Food Packaging Applications

The food packaging sector generates large volumes of plastic waste due to the high demand for packaged products with a short shelf-life. Biopolymers such as starch-based materials are a promising alternative to non-renewable resins, offering a sustainable and environmentally friendly food packaging alternative for single-use products. This article provides a chronology of the development of starch-based materials for food packaging. Particular emphasis is placed on the challenges faced in processing these materials using conventional processing techniques for thermoplastics and other emerging techniques such as electrospinning and 3D printing. The improvement of the performance of starch-based materials by blending with other biopolymers, use of micro- and nano-sized reinforcements, and chemical modification of starch is discussed. Finally, an overview of recent developments of these materials in smart food packaging is given.

Sustainable production of curable maltodextrin-based electrospun microfibers

Maltodextrins are inexpensive, water-soluble starch hydrolysis products composed of high molecular weight polysaccharide molecules. This feature allows their water solutions to be processed by electrospinning to produce bio-based microfibrous mats. Also, the presence of hydroxyl functions along the maltodextrin's backbone enables cross-linking reactions to be performed, necessary to overcome the intrinsic solubility of the starting material, by exploiting suitable functional molecules. In this work, the electrospinning process to obtain fibre deposition from water solutions of five different commercial maltodextrins was firstly optimized. Well-defined fibres with diameters ranging between 1.1 μm and 1.5 μm were successfully obtained using water as the unique solvent. Subsequently, the same maltodextrin-containing water solutions with citric acid added were then processed again. The presence of citric acid did not hinder the spinnability of the studied systems, while the possibility to achieve a one-step thermal curing of the obtained fibres was proved via solubility tests, TGA, and FTIR-ATR analyses. Eventually, bio-based cross-linked mats with fibre diameters ranging from 0.7 μm to 1.4 μm were obtained from the electrospinning of commercial maltodextrins and citric acid, employing water as the unique solvent and environmentally friendly curing processes. This approach enables the reported mats to be further studied for environmental, pharmaceutical, and medical applications.

This paper reports a sustainable approach to obtain thermally curable bio-based microfibrous mats from the electrospinning of water solutions containing commercial maltodextrins and citric acid.

Cationized high amylose maize starch films reinforced with borax cross-linked nanocellulose

In this study, a novel strategy for modifying nanocellulose (NC) by borax cross-linking was developed, and the obtained borax modified nanocellulose (BNC) was incorporated into cationized high amylose maize starch (CS) films to evaluate the applicability. Cellulose molecules were successfully cross-linked by boron ester bonds, and the original crystal type and basic chemical structure were not changed. Compared with NC, the relative crystallinity of BNC was slightly increased, and the thermal stability was obviously enhanced. Addition of NC and BNC to CS films significantly improved their tensile strength and water resistance. The dispersion of nanocellulose in CS films was effectively improved by borax cross-linking modification. CS/BNC films showed higher mechanical and water resistance properties compared with CS/NC films. Compared with pure CS film, tensile strength of the composite film with 6 wt% BNC increased about 4.0 times, and its water-vapor permeability decreased about 37%. The novel strategy for preparing BNC by using boron ester bonds will provide a potential approach for the development of starch films with desirable properties.

Overview of Bioplastic Introduction and Its Applications in Product Packaging

Each year, more than 330 million tons of plastic are produced worldwide. The main consumers of plastics are the packaging (40%), building (20%) and automotive (8%) industries, as well as for the manufacture of household appliances. The vast majority of industrial plastics are not biodegradable and, therefore, create environmental problems due to the increase in the amount of solid waste. Studies have been conducted to produce biodegradable materials such as bioplastics to overcome this environmental problem. Bioplastics are defined as materials that are bio-based, biodegradable, or both; they can provide excellent biodegradability and can be used to help alleviate environmental problems. Therefore, this article presents an overview of the introduction of bioplastic materials and classifications, and a comprehensive review of their drawbacks and areas of importance, including basic and applied research, as well as biopolymer mixtures and biocomposites developed in the last decade. At the same time, this article provides insights into the development of bioplastics research to meet the needs of many industries, especially in the packaging industry in Malaysia. This review paper also focuses generally on bioplastic packaging applications such as food and beverage, healthcare, cosmetics, etc.