Wettability of conducting polymers: From superhydrophilicity to superoleophobicity

Material-based treatment strategies against intraosseous implant biofilm infection

Implant-associated infections present a significant clinical obstacle for orthopedic practitioners, with bacterial biofilm formation serving as a pivotal factor in the initiation, progression, and management of such infections. Conventional approaches have proven inadequate in fully eradicating biofilm-related infections. Consequently, novel material-based therapeutic strategies have been developed, encompassing the utilization of antimicrobial agents, delivery vehicles, and synergistic antibacterial systems. In this review, we provide a succinct overview of recent advancements in anti-biofilm strategies, with the aim of offering insights that may aid in the treatment of intraosseous implant infections.

A Review of Methods to Modify the PDMS Surface Wettability and Their Applications

Polydimethylsiloxane (PDMS) has attracted great attention in various fields due to its excellent properties, but its inherent hydrophobicity presents challenges in many applications that require controlled wettability. The purpose of this review is to provide a comprehensive overview of some key strategies for modifying the wettability of PDMS surfaces by providing the main traditional methods for this modification and the results of altering the contact angle and other characteristics associated with this property. Four main technologies are discussed, namely, oxygen plasma treatment, surfactant addition, UV-ozone treatment, and the incorporation of nanomaterials, as these traditional methods are commonly selected due to the greater availability of information, their lower complexity compared to the new techniques, and the lower cost associated with them. Oxygen plasma treatment is a widely used method for improving the hydrophilicity of PDMS surfaces by introducing polar functional groups through oxidation reactions. The addition of surfactants provides a versatile method for altering the wettability of PDMS, where the selection and concentration of the surfactant play an important role in achieving the desired surface properties. UV-ozone treatment is an effective method for increasing the surface energy of PDMS, inducing oxidation, and generating hydrophilic functional groups. Furthermore, the incorporation of nanomaterials into PDMS matrices represents a promising route for modifying wettability, providing adjustable surface properties through controlled dispersion and interfacial interactions. The synergistic effect of nanomaterials, such as nanoparticles and nanotubes, helps to improve wetting behaviour and surface energy. The present review discusses recent advances of each technique and highlights their underlying mechanisms, advantages, and limitations. Additionally, promising trends and future prospects for surface modification of PDMS are discussed, and the importance of tailoring wettability for applications ranging from microfluidics to biomedical devices is highlighted. Traditional methods are often chosen to modify the wettability of the PDMS surface because they have more information available in the literature, are less complex than new techniques, and are also less expensive.

Induced Wettability Switch in Thin Films of Conductive Polymer Coatings Exhibiting Hydrophobic/Hydrophilic Interactions

The hydrophobic/hydrophilic character of some conductive polymer (CP) coatings can be switched in the function of the working conditions of these adaptive materials. We studied the influence of electrical stimuli and intrinsic physical characteristics (nature of the polymerizable core, dopants, the droplet dimension and physical properties, surface roughness, etc.) on the CP wettability. A simulation strategy was developed for determining the contact angle (CA) of a liquid droplet on a CP layer with roughness. The method was tested for new reported CP composites, but with new dopants. The results indicate that the influences on the material wettability are correlated, and in practice, modification of more than one parameter converges to a wanted behavior of the material. E.g., the CP porous film of poly(3-hexylthiophene) (P3HT) + [6,6]-phenyl-C61-butyricacid-methyl-ester (PCBM) changes its wettability at voltages of up to 26 V, but if doping ions are inserted and the roughness geometry is modified, the voltage decreases twice. Our multi-parametrical study points out that the polymer wettability type is driven by the voltage, but this effect is tuned differently by each internal parameter. The thin films' effect and the dopants (in-situ and ex-situ) significantly decrease the actuation voltage. We also illustrated that the wettability type does not change for specific sets of parameters.

Electrolyte-Wettability Issues and Challenges of Electrode Materials in Electrochemical Energy Storage, Energy Conversion, and Beyond

The electrolyte-wettability of electrode materials in liquid electrolytes plays a crucial role in electrochemical energy storage, conversion systems, and beyond relied on interface electrochemical process. However, most electrode materials do not have satisfactory electrolyte-wettability for possibly electrochemical reaction. In the last 30 years, there are a lot of literature have directed at exploiting methods to improve electrolyte-wettability of electrodes, understanding basic electrolyte-wettability mechanisms of electrode materials, exploring the effect of electrolyte-wettability on its electrochemical energy storage, conversion, and beyond performance. This review systematically and comprehensively evaluates the effect of electrolyte-wettability on electrochemical energy storage performance of the electrode materials used in supercapacitors, metal ion batteries, and metal-based batteries, electrochemical energy conversion performance of the electrode materials used in fuel cells and electrochemical water splitting systems, as well as capacitive deionization performance of the electrode materials used in capacitive deionization systems. Finally, the challenges in approaches for improving electrolyte-wettability of electrode materials, characterization techniques of electrolyte-wettability, as well as electrolyte-wettability of electrode materials applied in special environment and other electrochemical systems with electrodes and liquid electrolytes, which gives future possible directions for constructing interesting electrolyte-wettability to meet the demand of high electrochemical performance, are also discussed.

Effect of Electrolytic Cations on a 3D Cd-MOF for Supercapacitive Electrodes

A cadmium-based metal-organic framework (Cd-MOF) is synthesized in a facile manner at ambient temperature by an easy slow diffusion process. The three-dimensional (3D) structure of Cd-MOF is authenticated by single-crystal X-ray diffraction studies and exhibits a cuboid-shaped morphology with an average edge length of ∼1.13 μm. The prepared Cd-MOF was found to be electroactive in nature, which resulted in a specific capacitance of 647 F g^-1 at 4 A g^-1 by maintaining a retention of ∼78% over 10,000 successive cycles in the absence of any binder. Further, to distinguish the efficiency of Cd-MOF electrodes, different electrolytes (NaOH, KOH, and LiOH) were explored, wherein NaOH revealed a higher capacitive response due to its combined effect of ionic and hydrated ionic radii. To investigate the practical applicability, an asymmetric supercapacitor (ASC) device is fabricated by employing Cd-MOF as the positive electrode and activated carbon (AC) as the negative electrode, enabling it to light a commercial light-emitting diode (LED) bulb (∼1.8 V). The as-fabricated ASC device delivers comparable energy density and power density.

Influence of Polyfluorinated Side Chains and Soft-Template Method on the Surface Morphologies and Hydrophobic Properties of Electrodeposited Films from Fluorene Bridged Dicarbazole Monomers

A clear case of relationship between the monomer molecular structure and the capability of tuning the morphology of electrodeposited gas bubbles template polymer thin films is shown. To this end, a series of fluorene-bridged dicarbazole derivatives containing either linear or terminally branched polyfluorinated side chains connected to the fluorene subunit were synthesized and their electrochemical properties were investigated. The new compounds underwent electrochemical polymerization over indium tin oxide electrodes to give hydrophobic films with nanostructural and morphological properties strongly dependent on the nature of the side chains. Gas bubbles templated electropolymerization was next achieved by the addition of tiny amounts of water to the monomer solutions, without using surfactants. Within the investigated set of molecules, the nanostructural properties of the soft-templated films obtained from monomers bearing linear side chains could be fine-tuned by adjusting electrochemical parameters, leading to superhydrophobic surfaces.

Impact of Interfaces, and Nanostructure on the Performance of Conjugated Polymer Photocatalysts for Hydrogen Production from Water

The direct conversion of sunlight into hydrogen through water splitting, and by converting carbon dioxide into useful chemical building blocks and fuels, has been an active area of research since early reports in the 1970s. Most of the semiconductors that drive these photocatalytic processes have been inorganic semiconductors, but since the first report of carbon nitride organic semiconductors have also been considered. Conjugated materials have been relatively extensively studied as photocatalysts for solar fuels generation over the last 5 years due to the synthetic control over composition and properties. The understanding of materials' properties, its impact on performance and underlying factors is still in its infancy. Here, we focus on the impact of interfaces, and nanostructure on fundamental processes which significantly contribute to performance in these organic photocatalysts. In particular, we focus on presenting explicit examples in understanding the interface of polymer photocatalysts with water and how it affects performance. Wetting has been shown to be a clear factor and we present strategies for increased wettability in conjugated polymer photocatalysts through modifications of the material. Furthermore, the limited exciton diffusion length in organic polymers has also been identified to affect the performance of these materials. Addressing this, we also discuss how increased internal and external surface areas increase the activity of organic polymer photocatalysts for hydrogen production from water.

Antifouling Conductive Composite Membrane with Reversible Wettability for Wastewater Treatment

Membrane fouling severely hinders the sustainable development of membrane separation technology. Membrane wetting property is one of the most important factors dominating the development of membrane fouling. Theoretically, a hydrophilic membrane is expected to be more resistant to fouling during filtration, while a hydrophobic membrane with low surface energy is more advantageous during membrane cleaning. However, conventional membrane materials do not possess the capability to change their wettability on demand. In this study, a stainless steel mesh–sulfosuccinate-doped polypyrrole composite membrane (SSM/PPY(AOT)) was prepared. By applying a negative or positive potential, the surface wettability of the membrane can be switched between hydrophilic and relatively hydrophobic states. Systematic characterizations and a series of filtration experiments were carried out. In the reduction state, the sulfonic acid groups of AOT were more exposed to the membrane surface, rendering the surface more hydrophilic. The fouling filtration experiments verified that the membrane is more resistant to fouling in the hydrophilic state during filtration and easier to clean in the hydrophobic state during membrane cleaning. Furthermore, Ca²⁺ and Mg²⁺ could complex with foulants, aggravating membrane fouling. Overall, this study demonstrates the importance of wettability switching in membrane filtration and suggests promising applications of the SSM/PPY(AOT) membrane.

Recent advances in superhydrophobic polyurethane: preparations and applications

Even though polyurethane (PU) has been widely applied, its superhydrophobicity is inadequate for certain applications. As such, the development of superhydrophobic polyurethane (SHPU) has recently attracted significant attention, with numerous motivating reports in recent years. However, a comprehensive review that summarizes these state-of-the-art developments remains lacking. Thus, this review aims to fill up this gap by reviewing the recent preparation methods for SHPU based on superhydrophobic theories and principles. Three main types of methods used in promoting the hydrophobicity of PU are emphasized in this review; (1) incorporation of silicide or fluoride to lower the surface energy, (2) creation of micro/nano-scale rough surfaces by electrospinning or grafting of nanoparticles, and (3) integrating the earlier two methods to develop a synergistic approach. Furthermore, this review also discussed the various applications of SHPU in oil spill treatment, protective coating, self-healing materials and sensors.

Smart surfaces with reversibly switchable wettability: Concepts, synthesis and applications

As a growing hot research topic, manufacturing smart switchable surfaces has attracted much attention in the past a few years. The state-of-the-art study on reversibly switchable wettability of smart surfaces has been presented in this systematic review. External stimuli are brought about to render the alteration in chemical conformation and surface morphology to drive the wettability switch. Here, starting from the fundamental theories related to the surfaces wetting principles, highlights on different triggers for switchable wettability, such as pH, light, ions, temperature, electric field, gas, mechanical force, and multi-stimuli are discussed. Different applications that have various wettability requirement are targeted, including oil-water separation, droplets manipulation, patterning, liquid transport, and so on. This review aims to provide a deep insight into responsive interfacial science and offer guidance for smart surface engineering. It ends with a summary of current challenges, future opportunities, and potential solutions on smart switch of wettability on superwetting surfaces.

Organic Bioelectronics for In Vitro Systems

Bioelectronics have made strides in improving clinical diagnostics and precision medicine. The potential of bioelectronics for bidirectional interfacing with biology through continuous, label-free monitoring on one side and precise control of biological activity on the other has extended their application scope to in vitro systems. The advent of microfluidics and the considerable advances in reliability and complexity of in vitro models promise to eventually significantly reduce or replace animal studies, currently the gold standard in drug discovery and toxicology testing. Bioelectronics are anticipated to play a major role in this transition offering a much needed technology to push forward the drug discovery paradigm. Organic electronic materials, notably conjugated polymers, having demonstrated technological maturity in fields such as solar cells and light emitting diodes given their outstanding characteristics and versatility in processing, are the obvious route forward for bioelectronics due to their biomimetic nature, among other merits. This review highlights the advances in conjugated polymers for interfacing with biological tissue in vitro, aiming ultimately to develop next generation in vitro systems. We showcase in vitro interfacing across multiple length scales, involving biological models of varying complexity, from cell components to complex 3D cell cultures. The state of the art, the possibilities, and the challenges of conjugated polymers toward clinical translation of in vitro systems are also discussed throughout.

Surface Design for Antibacterial Materials: From Fundamentals to Advanced Strategies

Healthcare-acquired infections as well as increasing antimicrobial resistance have become an urgent global challenge, thus smart alternative solutions are needed to tackle bacterial infections. Antibacterial materials in biomedical applications and hospital hygiene have attracted great interest, in particular, the emergence of surface design strategies offer an effective alternative to antibiotics, thereby preventing the possible development of bacterial resistance. In this review, recent progress on advanced surface modifications to prevent bacterial infections are addressed comprehensively, starting with the key factors against bacterial adhesion, followed by varying strategies that can inhibit biofilm formation effectively. Furthermore, "super antibacterial systems" through pre-treatment defense and targeted bactericidal system, are proposed with increasing evidence of clinical potential. Finally, the advantages and future challenges of surface strategies to resist healthcare-associated infections are discussed, with promising prospects of developing novel antimicrobial materials.

Rewritable PEDOT Film Based on Water-Writing and Electroerasing

Rewritable paper has greatly promoted the sustainable development of society. However, the hydrophilicity/lipophilicity of the poly(3,4-ethylenedioxythiophene) (PEDOT) film limits its application as the rewritable paper. Herein, we constructed a repeatable writing/erasing pattern on a PEDOT film (rewritable PEDOT paper) by combining wettability control, water-induced dedoping, and an electrochemical redox reaction. The treatment with a medium-polarity/high-volatility solvent (MP/HVS) adjusted the wettability of the PEDOT film (water contact angle increased from 6.5° to 146.2°), contributing to the formation of a hydrophobic writable substrate. The treatment with a high-polarity solvent (HPS) induced the dedoping of anions in the PEDOT chain, resulting in the film's color changed from blue to purple and serving as a writing process. The intrinsic electrochemical redox (elimination of color change by doping/dedoping of lithium ions in the PEDOT chain) of the PEDOT film enabled the erasing process. This writing/erasing process can be repeated at least 10 times. The patterned PEDOT film maintained excellent stability to standing diverse solvents (low-polarity solvent (LPS) and MP/HVS), high temperatures (350 °C), and irradiation of different light wavelengths (wavelengths of 365, 380, 460, 520, and 645 nm). Additionally, the conductivity of the PEDOT film was quantitatively measured (impedance: LPS, increased 8.84%; MP/HVS, decreased 6.67%; and HPS, increased 27.97%) by fabricating a micropatterned PEDOT electrode. This work will provide a method for the fabrication of PEDOT-based optoelectronic functional materials.

Multi-solvent large stopband monitoring based on the insolubility/superoleophilicity of PEDOT inverse opals

Monitoring and post-processing of organic solvents are important for environmental protection. Challenges remain in the development of a universal material which can detect any solvent with a large stopband shift and show excellent stability. Herein, we demonstrate a poly 3,4-ethylenedioxythiophene inverse opal (PEDOT-IO) with a large stopband shift toward various solvents based on the insolubility/superoleophilicity properties. The PEDOT-IO film was fabricated by the potentiostatic polymerization of 3,4-ethylene dioxythiophene using a three-electrode system, infiltrating the interstices of the photonic crystal template with PEDOT and subsequently removing the template. The surface of the PEDOT-IO film presented a composite structure: interconnected pores and hollow shells. When the solvent was introduced into the voids of PEDOT-IO film, the effective refractive index (n) of the whole sample increased due to the replacement of air with the solvent, and the pores and hollow shells showed different degrees of swelling. The synergistic effect of increased n and volume expansion contributed to a large redshift of the stopband of the PEDOT-IO film. PEDOT-IO film exhibited excellent resistance to various solvents and high/low temperature. This work further enriches the application of conductive polymers in solvent-responsive PC sensors and provides a novel means of creating PC-based optical materials and devices.

Performance Comparison of Solid Lead Ion Electrodes with Different Carbon-Based Nanomaterials as Electron-Ion Exchangers

Carbon-based nanomaterials with carboxylation or chemical modification are widely used as electron-ion exchangers of solid electrodes. For reducing the complexity and dangerousness of the intermediate layer preparation, different original carbon-based nanomaterials are dispersed in deionized water. They are applied in the fabrication of Pb2+-selective electrodes. Because the contact angle of graphene reached 132.5°, the Pb2+-selective electrode of graphene used as an electron-ion exchanger showed excellent performance with a low detection limit of 3.4 × 10-8 M and a fast average response time of 42.6 s. The Nernstian response slope could reach 26.8 mV/decade, and the lifetime lasted for a month. Therefore, graphene suspension without any treatment can be used as the intermediate layer of solid-state electrodes, providing a reference for the preparation of other ion-selective electrodes.

Superwetting Shape Memory Microstructure: Smart Wetting Control and Practical Application

Smart control of wettability on superwetting surfaces has aroused much attention in the past few years. Compared with traditional strategies such as adjusting the surface chemistry, regulating the surface microstructure is more difficult, though it can bring lots of new functions. Recently, it was found that, based on the shape memory effect of a shape memory polymer, the surface microstructure can be controlled more easily and precisely. Here, recent developments in the smart control of wettability on superwetting shape memory microstructures and corresponding applications are summarized. The primary concern is the superhydrophobic surfaces that have demonstrated numerous attractive functions, including controllable droplet storage, transportation, bouncing, capture/release, and reprogrammable gradient wetting, under variation of the surface microstructure. Finally, some achievements in wetting control on other superwetting surfaces (such as superomniphobic surfaces and superslippery surfaces) and perspectives on future research directions are also discussed.

The Effect of Hydroxyl on the Superhydrophobicity of Dodecyl Methacrylate (LMA) Coated Fabrics through Simple Dipping-Plasma Crosslinked Method

In order to obtain stable superhydrophobicity, suitable hydrophobic treatment agents should be selected according to different material properties. In this paper, cotton and poly(ethylene terephthalate) (PET) fabrics were respectively coated with dodecyl methacrylate (LMA) via argon combined capacitively coupled plasma (CCP), and the surface hydrophobicity and durability of the treated cotton and polyester fabrics are also discussed. An interesting phenomenon happened, whereby the LMA-coated cotton fabric (Cotton-g-LMA) had better water repelling and mechanical durability properties than LMA-coated PET fabric (PET-g-LMA), and LMA-coated hydroxyl-grafted PET fabrics (PET fabrics were successively coated with polyethylene glycol (PEG) and LMA, PET-g-PEG & LMA) had a similar performance to cotton fabrics. The water contact angles of Cotton-g-LMA, PET-g-LMA and PET-g-PEG & LMA were 156°, 153° and 155°, respectively, and after 45 washing cycles or 1000 rubbing cycles, the corresponding water contact angles decreased to 145°, 88°, 134° and 146°, 127° and 143°, respectively. Additionally, thermoplastic polyurethane (TPU) and polyamides-6 (PA6) fabrics all exhibited the same properties as the PET fabric. Therefore, the grafting of hydroxyl can improve the hydrophobic effect of LMA coating and the binding property between LMA and fabrics effectively, without changing the wearing comfort.

Surface Finishing of 3D-Printed Polymers with Selected Coatings

Surface treatment of 3D-printed objects with coatings, besides protection against environmental influences, offers the improvement of visual appearance of the printed elements. In order to design an optimum surface system, the physical and chemical properties of polymers surfaces should be well-known. In the present study, 3D-printed samples of acrylonitrile-butadiene-styrene, poly(lactic acid) and poly(lactic acid) with wood flour additive were coated with three different types of coating, namely solvent borne alkyd coating, water borne acrylic coating and coating made of acrylonitrile-butadiene-styrene diluted in acetone. The surface properties of substrates and the properties of surface systems were assessed with different methods. The results revealed the surfaces of polymers having hydrophobic character, whereas the color, gloss, surface roughness and coating film thickness of coated surfaces depend on the characteristics of particular coatings. Finally, the adhesion of coatings was shown to be appropriate, but dependent on substrate surface porosity and chemical properties of both substrate surface and coating asset.

Programming Multiphase Media Superwetting States in the Oil-Water-Air System: Evolutions in Hydrophobic-Hydrophilic Surface Heterogeneous Chemistry

Studies toward tailoring macroscopic extreme wetting behaviors on a certain well-defined surface in multiphase media are significant but still at an infant stage. Herein, superantiwetting evolutions in the oil-water-air system can be programmed from single to quadruple superrepellence by controlling the surface hydrophobic-hydrophilic heterogeneous chemistry. Ammonia vapor exposure makes the realization of challenging superhydrophilicity-superoleophobicity possible in air medium, causing the transition from quadruple to triple superantiwetting states in the oil-water-air system. Upon UV illumination, only single superrepellence-underwater superoleophobicity is maintained on titanium dioxide (TiO₂, P25)-based coatings. A reversible transition between underoil superhydrophilicity and superhydrophobicity via an alternating UV irradiation and heating process leads to a switching between "water-absorbing" and "size-sieving" effects in water-in-oil emulsion separation. A comparative study for investigating two such effects in emulsion separation is further investigated. The current conceptual insights not only extend superwetting states to multiphase media, but can also deepen the understanding of the relationship between macroscopic extreme wetting behaviors and surface chemistry.

Smart Copolymer-Functionalized Flexible Surfaces with Photoswitchable Wettability: From Superhydrophobicity with "Rose Petal" Effect to Superhydrophilicity

Realizing smart surfaces with switchable wettability inspired by nature continues to be fascinating as well as challenging. Herein, we present a versatile dip-coating approach to fabricate smart polymer-functionalized flexible surfaces with photoswitchable superwettability. Decorated with novel acrylate copolymers bearing a trifluoromethyl side chain and fluorine-containing azobenzene derivative moieties, the modified cotton fabric possesses a rose petal-like superhydrophobicity with contact angles larger than 150° and high water adhesion. This smart surface exhibits rapid phototriggered wettability transformation between superhydrophobicity and superhydrophilicity via alternate irradiation with ultraviolet and visible light, respectively. Meanwhile, the as-prepared flexible smart surfaces have excellent chemical and physical stabilities, which could tolerate harsh environmental conditions and repetitive mechanical deformation (e.g., stretching, curling, folding, and twisting) as well as multiple washing. More importantly, based on the excellent photocontrollability, various erasable and rewritable patterns with distinct wetting properties upon selective photoirradiation can be obtained. This simple strategy and the developed smart surface may find more advanced potential applications in controllable liquid transport, patterning droplet microarrays, and microfluidic devices.

Conducting Polymers, Hydrogels and Their Composites: Preparation, Properties and Bioapplications

This review is focused on current state-of-the-art research on electroactive-based materials and their synthesis, as well as their physicochemical and biological properties. Special attention is paid to pristine intrinsically conducting polymers (ICPs) and their composites with other organic and inorganic components, well-defined micro- and nanostructures, and enhanced surface areas compared with those of conventionally prepared ICPs. Hydrogels, due to their defined porous structures and being filled with aqueous solution, offer the ability to increase the amount of immobilized chemical, biological or biochemical molecules. When other components are incorporated into ICPs, the materials form composites; in this particular case, they form conductive composites. The design and synthesis of conductive composites result in the inheritance of the advantages of each component and offer new features because of the synergistic effects between the components. The resulting structures of ICPs, conducting polymer hydrogels and their composites, as well as the unusual physicochemical properties, biocompatibility and multi-functionality of these materials, facilitate their bioapplications. The synergistic effects between constituents have made these materials particularly attractive as sensing elements for biological agents, and they also enable the immobilization of bioreceptors such as enzymes, antigen-antibodies, and nucleic acids onto their surfaces for the detection of an array of biological agents. Currently, these materials have unlimited applicability in biomedicine. In this review, we have limited discussion to three areas in which it seems that the use of ICPs and materials, including their different forms, are particularly interesting, namely, biosensors, delivery of drugs and tissue engineering.

Design of a Zn-MOF biosensor via a ligand “lock” for the recognition and distinction of S-containing amino acids

A new method of introducing a ‘lock’ ligand into the frame of MOFs is described to achieve the first example of a MOF-based biosensor for the recognition and distinction of S-containing amino acids.

Under-Oil Switchable Superhydrophobicity to Superhydrophilicity Transition on TiO2 Nanotube Arrays

Recently, smart interfacial materials that can reversibly transit between the superhydrophobicity and superhydrophilicity have aroused much attention. However, all present performances happen in air, and to realize such a smart transition in complex environments, such as oil, is still a challenge. Herein, TiO₂ nanotube arrays with switchable transition between the superhydrophobicity and superhydrophilicity in oil are reported. The switching can be observed by alternation of UV irradiation and heating process, and the smart controllability can be ascribed to the cooperative effect between the surface nanostructures and the chemical composition variation. By using the controllable wetting performances, some applications such as under-oil droplet-based microreaction and water-removal from oil were demonstrated on our surface. This paper reports a surface with smart water wettability in oil, which could start some fresh ideas for wetting control on interfacial materials.

Polaron dynamics with off-diagonal coupling: beyond the Ehrenfest approximation

Treated traditionally by the Ehrenfest approximation, the dynamics of a one-dimensional molecular crystal model with off-diagonal exciton-phonon coupling is investigated in this work using the Dirac-Frenkel time-dependent variational principle with the multi-D₂Ansatz. It is shown that the Ehrenfest method is equivalent to our variational method with the single D₂Ansatz, and with the multi-D₂Ansatz, the accuracy of our simulated dynamics is significantly enhanced in comparison with the semi-classical Ehrenfest dynamics. The multi-D₂Ansatz is able to capture numerically accurate exciton momentum probability and help clarify the relation between the exciton momentum redistribution and the exciton energy relaxation. The results demonstrate that the exciton momentum distributions in the steady state are determined by a combination of the transfer integral and the off-diagonal coupling strength, independent of the excitonic initial conditions. We also probe the effect of the transfer integral and the off-diagonal coupling on exciton transport in both real and reciprocal space representations. Finally, the variational method with importance sampling is employed to investigate temperature effects on exciton transport using the multi-D₂Ansatz, and it is demonstrated that the variational approach is valid in both low and high temperature regimes.

Electric heated cotton fabrics with durable conductivity and self-cleaning properties

This study was carried out to improve durability and reduce conductivity degradation of polypyrrole-deposited cotton fabrics by introducting a superhydrophobic surface.

Superlyophilic Interfaces and Their Applications

Superlyophilic interfaces denote interfaces displaying strong affinity to diverse liquids, including superhydrophilic, superoleophilic, and superamphiphilic interfaces. When coming in contact with these interfaces, water or oil droplets tend to spread completely with contact angles close to 0°, presenting versatile applications including self-cleaning, antifogging, controllable liquid transport, liquid separation, and so forth. Inspired by nature, scientists have developed various kinds of artificial superlyophilic (SLPL) interfaces in the past decades. In terms of dimensional characteristics, the artificial SLPL interfaces can be divided into four categories: i) 0D particles, whose dispersibility or catalytic performance can be notably enhanced by superlyophilicity; ii) 1D micro-/nanofibers or nanotubes/channels, which can efficiently transfer liquids with SLPL interfaces; iii) 2D flat SLPL interfaces, on which different functional molecules can be deposited uniformly, forming ultrathin and smooth films; and iv) 3D structures, which can be obtained by either constructing 0D, 1D, or 2D SLPL materials separately or directly fabricating random SLPL frameworks, and can always be used as functional coatings or bulk materials. Here, natural and artificial SLPL interfaces are briefly introduced, followed by a short discussion of the limit between lyophilicity and lyophobicity, and then a snapshot of methods to generate SLPL interfaces is given. Specific focus is placed on recent achievements of constructing SLPL interfaces from zero to three dimensions. Following that, broad applications of SLPL interfaces in commercial areas will be introduced. Finally, a short summary and outlook for future challenges in this field is presented.

Redox-active conducting polymers modulate Salmonella biofilm formation by controlling availability of electron acceptors

Biofouling is a major problem caused by bacteria colonizing abiotic surfaces, such as medical devices. Biofilms are formed as the bacterial metabolism adapts to an attached growth state. We studied whether bacterial metabolism, hence biofilm formation, can be modulated in electrochemically active surfaces using the conducting conjugated polymer poly(3,4-ethylenedioxythiophene) (PEDOT). We fabricated composites of PEDOT doped with either heparin, dodecyl benzene sulfonate or chloride, and identified the fabrication parameters so that the electrochemical redox state is the main distinct factor influencing biofilm growth. PEDOT surfaces fitted into a custom-designed culturing device allowed for redox switching in Salmonella cultures, leading to oxidized or reduced electrodes. Similarly large biofilm growth was found on the oxidized anodes and on conventional polyester. In contrast, biofilm was significantly decreased (52-58%) on the reduced cathodes. Quantification of electrochromism in unswitched conducting polymer surfaces revealed a bacteria-driven electrochemical reduction of PEDOT. As a result, unswitched PEDOT acquired an analogous electrochemical state to the externally reduced cathode, explaining the similarly decreased biofilm growth on reduced cathodes and unswitched surfaces. Collectively, our findings reveal two opposing effects affecting biofilm formation. While the oxidized PEDOT anode constitutes a renewable electron sink that promotes biofilm growth, reduction of PEDOT by a power source or by bacteria largely suppresses biofilm formation. Modulating bacterial metabolism using the redox state of electroactive surfaces constitutes an unexplored method with applications spanning from antifouling coatings and microbial fuel cells to the study of the role of bacterial respiration during infection.

Conjugated Polymer for Voltage-Controlled Release of Molecules

Conjugated polymers are attractive in numerous biological applications because they are flexible, biocompatible, cost-effective, solution-processable, and electronic/ionic conductive. One interesting application is for controllable drug release, and this has been realized previously using organic electronic ion pumps. However, organic electronic ion pumps show high operating voltages and limited transportation efficiency. Here, the first report of low-voltage-controlled molecular release with a novel organic device based on a conjugated polymer poly(3-hexylthiophene) is presented. The releasing rate of molecules can be accurately controlled by the duration of the voltage applied on the device. The use of a handy mobile phone to remotely control the releasing process and its application in delivering an anticancer drug to treat cancer cells are also successfully demonstrated. The working mechanism of the device is attributed to the unique switchable permeability of poly(3-hexylthiophene) in aqueous solutions under a bias voltage that can tune the wettability of poly(3-hexylthiophene) via oxidation or reduction processes. The organic devices are expected to find many promising applications for controllable drug delivery in biological systems.

Electrostimulated Release of Neutral Drugs from Polythiophene Nanoparticles: Smart Regulation of Drug-Polymer Interactions

Poly(3,4-ethylenedioxythiophene) (PEDOT) nanoparticles are loaded with curcumin and piperine by in situ emulsion polymerization using dodecyl benzene sulfonic acid both as a stabilizer and a doping agent. The loaded drugs affect the morphology, size, and colloidal stability of the nanoparticles. Furthermore, kinetics studies of nonstimulated drug release have evidenced that polymer···drug interactions are stronger for curcumin than for piperine. This observation suggests that drug delivery systems based on combination of the former drug with PEDOT are much appropriated to show an externally tailored release profile. This is demonstrated by comparing the release profiles obtained in presence and absence of electrical stimulus. Results indicate that controlled and time-programmed release of curcumin is achieved in a physiological medium by applying a negative voltage of -1.25 V to loaded PEDOT nanoparticles.