Effect of gamma irradiation on physicochemical properties of commercial poly(lactic acid) clamshell for food packaging

Novel insights into photoaging mechanisms and environmental persistence risks of polylactic acid (PLA) microplastics: Direct and indirect photolysis

Polylactic acid (PLA), as a biodegradable plastic, exhibits high sensitivity to ultraviolet (UV) radiation, yet the mechanisms and environmental risks of its photoaging remain unclear. This study uses quantum chemical calculations (DFT and TD-DFT) and kinetic simulations to explore the direct and indirect photoaging of PLA. Direct photoaging indicates that the highest oscillator intensity absorption peaks occurred at 172 and 246 nm, corresponding to the 13th singlet (S13) and 48th triplet (T48) states, thereby initiating the Norrish I and Norrish II mechanisms. The innovative "electron-hole" technology effectively clarifies the variations in photoaging mechanisms under different wavelengths. Indirect photoaging involves multiple reactive oxygen species (ROS) like •OH, 1O2, •O2-, and •HO2. The study confirms the anhydride production hypothesis and proposes two novel •OH-induced mechanisms: carbonyl carbon addition and branched methyl hydrogen dehydrogenation. Both mechanisms are thermodynamically advantageous, but their products pose potential environmental risks. ROS species and concentrations impact both PLA's photoaging mechanisms and environmental persistence. Low •OH concentration in northeast China, especially in winter, suggests a significant photoaging risk. This study offers pioneering insights into photoaging mechanisms and emphasizes the pivotal role of ROS, offering recommendations for managing PLA environmental impacts and fates in China.

Investigating the involvement of the NLRP3/ASC/caspase-1 and NF-κb/MAPK pathways in the pathogenesis of gouty arthritis: Insights from irradiated and non-irradiated Trifolium alexandrium L. extracts and some metabolites

ETHNOPHARMACOLOGICAL RELEVANCE

Trifolium alexandrinum L. (TA), has traditionally been used in folk medicine for its anti-inflammatory properties against hyperuricemia and gout. However, the specific mechanisms of action of TA have not been thoroughly studied.

AIM OF THE WORK

This study aimed to evaluate the protective effects of irradiated (TR25) and non-irradiated (TR0) Trifolium alexandrinum L. aqueous extract (TAAE), along with two isolated compounds, caffeine (CAF) and saponin (SAP), in a rat model of acute gouty arthritis (GA).

MATERIALS AND METHODS

The GA model was established by injecting a monosodium urate (MSU) suspension into the knee joint. Synovial tissue pathology was assessed, and levels of TNF-α, IL-6, IL-1β, NF-κB, mTOR, AKT1, PI3K, NLRP3, and ASC were measured by ELISA. mRNA expression of ERK1, JNK, and p-38 MAPK was detected using qRT-PCR, and Caspase-1 protein expression was assessed by immunohistochemical analysis. Knee swelling, uric acid levels, liver and kidney function, and oxidative stress markers were also evaluated.

RESULTS

TAAE analysis identified 170 compounds, with 73 successfully identified using LC-HR-MS/MS, including caffeine citrate and theasapogenol B glycoside as the main constituents. The studied materials demonstrated significant protective effects against GA. TR25 administration significantly mitigated knee joint circumference compared to other treatments. It demonstrated potential in alleviating hyperuricemia, renal and hepatic impairments induced by MSU crystals. TR25 also alleviated oxidative stress and reduced levels of IL1β, IL-6, TNF-α, and NF-κB. Weak Caspase-1 immune-positive staining was observed in the TR25 group. TR25 decreased NLRP3 and ASC expression, reducing inflammatory cytokine levels in GA. It effectively inhibited the PI3K, AKT, and mTOR signaling pathways, promoting autophagy. Additionally, TR25 suppressed ERK1, JNK, and p-38 MAPK gene expression in synovial tissue. These effects were attributed to various components in TAAE, such as flavonoids, phenolic acids, tannins, alkaloids, and triterpenes.

CONCLUSION

Importantly, irradiation (25 KGy) enhanced the antioxidant effects and phtchemical contents of TAAE. Additionally, TR0, TR25, CAF, and SAP exhibited promising protective effects against GA, suggesting their therapeutic potential for managing this condition. These effects were likely mediated through modulation of the NLRP3/ASC/Caspase-1 and ERK/JNK/p-38 MAPK signaling pathways, as well as regulation of the PI3K/AKT/mTOR pathway. Further research is warranted to fully elucidate the underlying mechanisms and optimize their clinical applications.

Effect of Degradation on the Physicochemical and Mechanical Properties of Extruded Films of Poly(lactic acid) and Chitosan

This study addresses the fabrication of extruded films using poly(lactic acid) (PLA) and chitosan, with and without maleic anhydride as a compatibilizing agent, for potential applications in disposable food packaging. These films underwent controlled conditions of UV irradiation, water condensation, and temperature variations in an accelerated weathering chamber. The investigation analyzed the effect of different exposure periods on the structural, morphological, mechanical, and thermal properties of the films. It was observed that PLA films exhibited a lower susceptibility to degradation compared to those containing chitosan. Specifically, the pure PLA film showed an increase in elastic modulus and strength during the initial 144 h of exposure, associated with cross-linking induced by UV radiation. On the other hand, film Q2 composed of PLA, chitosan, and maleic anhydride and Q1 without maleic anhydride experienced a tensile strength loss of over 50% after 244 h of exposure. The Q2 film exhibited greater homogeneity, leading to increased resistance to degradation compared to that of Q1. As the degradation time increased, both the Q1 and Q2 films demonstrated a decline in thermal stability. These films also exhibited alterations in crystallinity attributed to the chemo-crystallization process, along with fluctuations in the glass transition temperature and crystallization, particularly at 288 h.

Influence of Ethylene Oxide and Gamma Irradiation Sterilization Processes on the Properties of Poly-L-Lactic-Acid (PLLA) Materials

In order to encourage the substitution of petrochemical polymers in medical technology with sustainable, bio-based materials, there is an urgent need for further investigations, especially data regarding their sterility performance. Within the scope of the investigations, selected material properties of poly-L-lactic-acid (PLLA), a specific type of poly(lactic-acid) (PLA), were analyzed before and after sterilization (using ethylene oxide or gamma irradiation) in order to investigate deviations in its chemical structure, wettability, optical, and mechanical properties. In particular, parameters such as molecular weight, complex viscosity, tensile strength, water contact angle, and color were discussed. Sterilization temperatures close to the glass transition of PLA, high humidity, and interactions with the ethylene oxide molecules have resulted in an increase in crystallinity, a decrease in elongation at break, and in some cases, a variation in wettability. As a consequence of exposure to high-energy radiation, the material's toughness is reduced due to chain scission, which is manifested through a decrease in molecular weight, an increase in crystallinity, and a partial change in surface energy. For the selected PLLA-materials (Luminy® L130, NP HT 202, and NP HT 203), ethylene oxide sterilization resulted in a comparatively minor variation in the characteristics behavior, and was chosen as the preferred method.

Amendment the surface structure and optical properties of Makrofol LT by low energy oxygen ion bombardment

Ion beam bombardment is a powerful technique to improve the surface properties of polymeric materials without changing the bulk properties. Herein, Makrofol LT films were bombarded with low energy of oxygen ions at different fluences ranging from 11 × 10¹⁷ to 44 × 10¹⁷ ions/cm². X-ray diffraction, FTIR spectroscopy, surface-roughness tester, ultraviolet-visible spectroscopy, and Fluorescence spectroscopy were used to examine the change in the structure, chemical functional groups, alteration in surface roughness parameters, and photo-physical properties. The obtained results evidenced that the ordering and disordering structure of bombarded Makrofol LT films were influenced by ion beam irradiation according to the ion fluence. The FTIR spectroscopy of functional group examination revealed the possibility of the presence of sp²-carbon clusterization and amorphization. The surface roughness parameters increase as the ion fluences increase. Optical measurements exhibit a shift of absorption-edge towards the visible zone that correlated to the surface damage and the creation of CC bonds. The fluorescence spectra exhibit that the yield intensities decrease with increasing ion fluences. This refers to improvement in the radiative-recombination rate relative to non-radiative recombination. This is attributable to the growth of clusters, the increase of density states of the surface, and the increase in the surface roughness of the bombarded samples.

Characterization of Biodegradable Food Contact Materials under Gamma-Radiation Treatment

Radiation is an example of one of the techniques used for pasteurization and sterilization in various packaging systems. There is a high demand for the evaluation of the possible degradation of new composites, especially based on natural raw materials. The results of experimental research that evaluated the impact of radiation technology on biodegradable and compostable packaging materials up to 40 kGy have been presented. Two commercially available flexible composite films based on aliphatic-aromatic copolyesters (AA) were selected for the study, including one film with chitosan and starch (AA-CH-S) and the other with thermoplastic starch (AA-S). The materials were subjected to the influence of ionizing radiation from 10 to 40 kGy and then tests were carried out to check their usability as packaging material for the food industry. The results showed that the mechanical properties of AA-S films improved due to the radiation-induced cross-linking processes, while in the case of AA-CH-S films, a considerable decrease in the elongation at break was observed. The results also showed a decrease in the WVTR in the case of AA-S and no changes in barrier properties in the case of AA-CH-S. Both materials revealed no changes in the odor analyzed by sensory analysis. In the case of the AA-S films, the higher the radiation dose, the faster the biodegradation rate. In the case of the AA-CH-S film, the radiation did not affect biodegradation. The performed research enables the evaluation of the materials intended for direct contact with food. AA-CH-S was associated with unsatisfactory parameters (exceeding the overall migration limit and revealing color change during storage) while AA-S showed compliance at the level of tests carried out. The study showed that the AA-CH-S composite did not show a synergistic effect due to the presence of chitosan.

Effect of Non-Thermal Food Processing Techniques on Selected Packaging Materials

In the last decade both scientific and industrial community focuses on food with the highest nutritional and organoleptic quality, together with appropriate safety. Accordingly, strong efforts have been made in finding appropriate emerging technologies for food processing and packaging. Parallel to this, an enormous effort is also made to decrease the negative impact of synthetic polymers not only on food products (migration issues) but on the entire environment (pollution). The science of packaging is also subjected to changes, resulting in development of novel biomaterials, biodegradable or not, with active, smart, edible and intelligent properties. Combining non-thermal processing with new materials opens completely new interdisciplinary area of interest for both food and material scientists. The aim of this review article is to give an insight in the latest research data about synergies between non-thermal processing technologies and selected packaging materials/concepts.

Effect of Gamma Irradiation on the PLA-Based Blends and Biocomposites Containing Rosemary Ethanolic Extract and Chitosan

The irradiation of polymeric materials with ionizing radiation (γ-rays, X-rays, accelerated electrons, ion beams, etc.) may lead to disproportion, hydrogen abstraction, arrangements, degradation, and/or the formation of new bonds. The purpose of this paper is to evaluate the effect of gamma irradiation on some new poly(lactic acid) (PLA)-based blends and biocomposites, which is crucial when they are used for food packaging or medical purposes. The polymeric blends and biocomposites based on PLA and rosemary ethanolic extract (R) and poly(ethylene glycol) (PEG) (20 wt%) plasticized PLA, chitosan (CS) (3–6 wt%) and R (0.5 wt%) biocomposites were subjected to gamma irradiation treatment using three low γ-doses of 10, 20, and 30 kGy. The effect of irradiation was evaluated by Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), thermogravimetry (TG), chemiluminescence method (CL), migration studies, and antibacterial activity tests. It was found that in comparison with neat PLA, the gamma irradiation in the oxidative conditions of the PLA-based blends and biocomposites, causes modifications in the structure, morphology, and thermal properties of the materials depending on irradiation dose and the presence of natural additives such as rosemary and chitosan. It was established that under a gamma-irradiation treatment with dose of 10–20 kGy, the PLA materials showed minor changes in structure and properties being suitable for application in packaging and in addition after irradiation with such doses their antimicrobial activity against Escherichia coli, Staphylococcus aureus, and Salmonella typhimurium is improved.

Investigations at the Product, Macromolecular, and Molecular Level of the Physical and Chemical Properties of a γ-Irradiated Multilayer EVA/EVOH/EVA Film: Comprehensive Analysis and Mechanistic Insights

Chemically and biologically safe storage of solutions for medical uses is a daily concern for industry since decades and it appeared even more dramatic during the last two years of pandemia. Biological safety is readily reached by sterilization using γ-irradiation process. However, such a type of irradiation induces the degradation and the release of chemicals able to spoil the biological solutions. Surprisingly, there are no investigations on multi-layer films combining multi-technique and multi-method approaches to unveil the events occurring during γ-irradiation. Furthermore, our investigations are focuses on properties/events occurring at product, macromolecular, and molecular levels.

Effect of gamma irradiation on physico-mechanical and structural properties of active Farsi gum-CMC films containing Ziziphora clinopodioides essential oil and lignocellulose nanofibers for meat packaging

The objective of this study was to examine the effect of gamma irradiation (0, 2.5, and 5 kGy) on physico-mechanical and structural characteristics of films based on Farsi gum-carboxymethyl cellulose supplemented with Ziziphora clinopodioides essential oil (ZEO; 0%, 1%, and 2%) and lignocellulose nanofibers (LCNF; 0%, 1%, and 2%), and their application on fresh minced beef meat's shelf-life during refrigerated temperature (4 ± 1 °C) for 16 days. Gamma irradiation under the ⁶⁰ Co source at 2.5 and 5 kGy doses did not have a significant effect on thickness, tensile strength, swelling index, oxygen permeability, and water vapor transmission rate of prepared films (P > 0.05). The best microbiological (total viable count, psychrotrophic bacterial count, Pseudomonas spp., Brochothrix thermosphacta, lactic acid bacteria, and Enterobacteriaceae) and chemical (thiobarbituric acid reactive substances, total volatile base nitrogen content, and peroxide value) properties were recorded for samples packaged with ZEO 2% + LCNF 2%, followed by ZEO 2% + LCNF 1%, ZEO 1% + LCNF 2%, and ZEO 1% + LCNF 1%. These results indicate acceptable extensions of hurdle technology for prolonged refrigeration of minced beef meat. PRACTICAL APPLICATION: The application of active packaging films has received considerable interest in extending the shelf-life of perishable foods during prolonged chilled storage. The effects of active Farsi gum-carboxymethyl cellulose films supplemented with Ziziphora clinopodioides essential oil 2% + lignocellulose nanofibers 2% resulted in delaying lipid oxidation and microbial spoilage growth of refrigerated minced beef meat and consequently extending the shelf-life during storage for at least 16 days.

Aliphatic Polyester-Based Biodegradable Microbeads for Sustainable Cosmetics

Marine pollution stemming from plastic microbeads (MBs) in personal care products has been substantially increased because of their nonbiodegradability and high adsorption capacity against persistent organic pollutants (POPs) in seawater. Moreover, the manufacturing process of MBs has been based on wet processes, such as emulsification, microfluidics, and precipitation. Therefore, a green process for obtaining biodegradable MBs is urgently necessary. Aliphatic polyesters, such as poly(lactic acid) (PLA, radiation-degradable) and poly(ε-caprolactone) (PCL, radiation-cross-linkable), have biodegradability and melt processability. The eco-friendly melt electrospraying process is a simple and cost-effective method for the preparation of MBs without the need for organic reagents. In this study, the PLA and PCL MBs were obtained by adjusting the main processing parameters during the melt electrospraying process. The weight losses of PLA and PCL MBs in aqueous environments occurred faster than those of positive controls, and the thermal transition parameters were decreased with the hydrolytic degradation of MBs. In the POP adsorption test, the biodegradable MBs showed poor adsorption because of their low specific surface area. The results of the cleansing efficiency test indicated that biodegradable MBs have great potential as more sustainable cosmetics to replace nondegradable MBs.

Reconciliation of pH, conductivity, total organic carbon with carboxylic acids detected by ion chromatography in solution after contact with multilayer films after γ-irradiation

The impact of γ-irradiation on polymers in multilayer films was studied by means of the study of the diffusion and release (spontaneous migration of the molecules from the container into the product) of chemical species in aqueous solution. A series of different measurements have been performed: pH, conductivity, total organic carbon (TOC) and ion chromatography (IC). Their evolution according to γ-irradiation dose was studied. More several rinsings made over several months allowed to quantify well the impact of the irradiation on these polymers. The samples are irradiated at several γ-doses, up to 270 kGy, and compared with a non-irradiated sample used as reference. It shows that quantity of generated carboxylic acids depends on the film material (PE/EVOH/PE and EVA/EVOH/EVA) and increases with γ-dose.