Characteristics of zwitterionic sulfobetaine acrylamide polymer and the hydrogels prepared by free-radical polymerization and effects of physical and chemical crosslinks on the UCST

New insights into pure zwitterionic hydrogels with high strength and high toughness

Zwitterionic hydrogels are electrically neutral materials with both cationic and anionic groups that impart excellent anti-fouling properties and ion channel orientations. However, pure zwitterionic hydrogels generally exhibit low strength and toughness. In this study, it has been discovered that polymerizable zwitterionic monomers in aqueous solution exhibit a unique liquid-liquid phase separation phenomenon at a high monomer concentration of ≥50 wt%, resulting in pure and commercial zwitterionic hydrogels with high compressive strength (6.5 MPa) and high toughness (2.12 kJ m-2). This phase separation and the corresponding aggregations might be caused by strong dipole-dipole interactions among residual zwitterionic monomers under the lack of free-water condition. The synergistic effect of liquid-liquid phase separation and polymer entanglement enhances the mechanical strength, toughness, self-recovery, and anti-freezing properties of pure polyzwitterionic hydrogels. Moreover, the high fracture energy of highly elongated yet tough polyzwitterionic hydrogels facilitates the development of high crack propagation resistance, which supports an expanded role in tissue engineering, soft flexible devices, and electronics applications with improved durability. A wide range of applications for the proposed polyzwitterionic hydrogels is demonstrated by the development and testing of a strain sensor and a triboelectric nanogenerator device. Our findings provide novel insights into the network structure of pure polyzwitterionic hydrogels.

Natural Oleanolic Acid-Tailored Eutectogels Featuring Multienvironment Shape Memory Performance

Shape memory gels, one of the primary modern smart materials, hold great promise in a myriad of applications spanning from soft robotics to medical devices. Nevertheless, most shape memory gels rely on water, organic solvents, and ionic liquids as dispersion mediums, posing the risks of freezing, dehydration, and toxicity to humans or environment. Herein, we have developed a thermoresponsive shape memory eutectogel by introducing an oleanolic acid-modified polyacrylamide network into a deep eutectic solvent (DES). The resulting eutectogel shows a fracture strength of 4.46 MPa along with elongation of 345%, Young's modulus of 14.83 MPa, and toughness of 9.51 MJ m-3. Thanks to the low freezing point and low volatility inherited from DES, this eutectogel possesses good antifreezing and long-term storage stability, which facilitate the shape memory behavior both in silicone oil and in air. The shape fixity and shape recovery ratios of this eutectogel maintain almost 90% during 10 cycles in silicone oil and more than 70% during four cycles in air that cannot be realized in hydrogels. By virtue of shape memory effect and conductivity, the eutectogel can be further used as a thermoswitch. This work presents a simple approach to fabricating shape memory eutectogels and imparts exciting prospects to smart eutectogels.

Thermo-Responsive Hydrogels Coupled with Photothermal Agents for Biomedical Applications

Intelligent hydrogels are materials with abilities to change their chemical nature or physical structure in response to external stimuli showing promising potential in multitudinous applications. Especially, photo-thermo coupled responsive hydrogels that are prepared by encapsulating photothermal agents into thermo-responsive hydrogel matrix exhibit more attractive advantages in biomedical applications owing to their spatiotemporal control and precise therapy. This work summarizes the latest progress of the photo-thermo coupled responsive hydrogel in biomedical applications. Three major elements of the photo-thermo coupled responsive hydrogel, i.e., thermo-responsive hydrogel matrix, photothermal agents, and construction methods are introduced. Furthermore, the recent developments of these hydrogels for biomedical applications are described with some selected examples. Finally, the challenges and future perspectives for photo-thermo coupled responsive hydrogels are outlined.

LCST-UCST Transition Property of a Novel Retarding Swelling and Thermosensitive Particle Gel

Super absorbent resin particles used as profile control and water plugging agent remains a deficiency that the particles swells with high speed when absorbing water, resulting in low strength and limited depth of migration. To address this issue, we proposed a thermosensitive particle gel possessing the upper critical solution temperature (UCST), which was synthesized from hydrophobically modified poly(vinyl alcohol)s (PVA) with glutaraldehyde (GA) as a cross-linker. The structure of the hydrogel was characterized by Fourier transform infrared spectrophotometer (FTIR) and nuclear magnetic resonance (NMR). The thermosensitive-transparency measurement and swelling experiment show that the hydrophobic-modified PVA solutions and corresponding hydrogels exhibited thermosensitive phase transition behaviors with lower critical solution temperature (LCST) and UCST. The results indicated that the temperature-induced phase transition behavior of CHPVA hydrogels leads to their retarding swelling property and great potential as an efficient water plugging agent with excellent temperature and salt resistance.

Zwitterionic nanocapsules with pH- and thermal- responsiveness for drug-controlled release

The construction of an environmentally responsive drug-release system is of great significance for the treatment of special diseases. In particular, the construction of nanomaterials with pH- and thermal-responsiveness, which can effectively encapsulate drugs and control drug release, is becoming hot research. In this study, zwitterionic nanocapsules with stable core-shell structures were synthesized by inverse reversible addition-fragmentation transfer miniemulsion interfacial polymerization. To further study the structure and performance of the nanocapsules, the prepared nanocapsules were characterized by transmission electron microscopy, dynamic light dispersion, and zeta potential analysis. It was found that the nanocapsules had dual pH- and thermal- responsiveness, and the average particle size ranged from 178 to 142 nm when the temperature changed from 25 °C to 40 °C. In addition, bovine serum albumin (BSA) was encapsulated into nanocapsules, and sustained release experiments were conducted at 10 °C and 40 °C. The results showed that nanocapsules as carriers of BSA could achieve the purpose of sustained release of drugs, and showed different sustained release curves at different temperatures. Finally,in vitrocytotoxicity tests were performed to demonstrate the feasibility of their biomedical application. It is believed that the dual pH- and thermal- responsive nanocapsules are promising for drug-controlled release.

Challenges and solutions in polymer drug delivery for bacterial biofilm treatment: A tissue-by-tissue account

To tackle the emerging antibiotic resistance crisis, novel antimicrobial approaches are urgently needed. Bacterial communities (biofilms) are a particular concern in this context. Biofilms are responsible for most human infections and are inherently less susceptible to antibiotic treatments. Biofilms have been linked with several challenging chronic diseases, including implant-associated osteomyelitis and chronic wounds. The specific local environments present in the infected tissues further contribute to the rise in antibiotic resistance by limiting the efficacy of systemic antibiotic therapies and reducing drug concentrations at the infection site, which can lead to reoccurring infections. To overcome the shortcomings of systemic drug delivery, encapsulation within polymeric carriers has been shown to enhance antimicrobial efficacy, permeation and retention at the infection site. In this Review, we present an overview of current strategies for antimicrobial encapsulation within polymeric carriers, comparing challenges and solutions on a tissue-by-tissue basis. We compare challenges and proposed drug delivery solutions from the perspective of the local environments for biofilms found in oral, wound, gastric, urinary tract, bone, pulmonary, vaginal, ocular and middle/inner ear tissues. We will also discuss future challenges and barriers to clinical translation for these therapeutics. The following Review demonstrates there is a significant imbalance between the research focus being placed on different tissue types, with some targets (oral and wound biofims) being extensively more studied than others (vaginal and otitis media biofilms and endocarditis). Furthermore, the importance of the local tissue environment when selecting target therapies is demonstrated, with some materials being optimal choices for certain sites of bacterial infection, while having limited applicability in others.

Zwitterionic Nanocapsules with Salt- and Thermo-Responsiveness for Controlled Encapsulation and Release

Intelligent polymer nanocapsules that can not only encapsulate substances efficiently but also release them in a controllable manner hold great potential in many applications. To date, although intensive efforts have been made to develop intelligent polymer nanocapsules, how to construct the well-defined core/shell structure with high stability via a straightforward method remains a considerable challenge. In this work, the target novel zwitterionic nanocapsules (ZN_Cs) with a stable hollow structure were synthesized by inverse reversible addition fragmentation transfer (RAFT) miniemulsion interfacial polymerization. The shell gradually grew from the water/oil interface due to the interfacial polymerization, accompanied by the cross-linking of the polyzwitterionic networks, where the core/shell structure could be well-tuned by adjusting the precursor compositions. The resultant ZN_Cs exhibited a salt-/thermo-induced swelling behavior through the phase transition of the external zwitterionic polymers. To further investigate the functions of ZN_Cs, different substances, such as methyl orange and bovine serum albumin (BSA), were encapsulated into the ZN_Cs with a high encapsulation efficiency of 89.3 and 93.6%, respectively. Interestingly, the loaded substances can be controllably released in aqueous solution triggered by salt or temperature variations, and such responsiveness also can be utilized to bounce off the bacteria adhered on target surfaces. We believe that these designed salt- and thermo-responsive intelligent polymer nanocapsules with well-defined core/shell structures and antifouling surfaces should be a promising platform for biomedical and saline related applications.

Expansion Microscopy with a Thermally Adjustable Expansion Factor Using Thermoresponsive Biospecimen-Hydrogel Hybrids

Expansion microscopy (ExM) is a technique in which swellable hydrogel-embedded biological samples are physically expanded to effectively increase imaging resolution. Here, we develop thermoresponsive reversible ExM (T-RevExM), in which the expansion factor can be thermally adjusted in a reversible manner. In this method, samples are embedded in thermoresponsive hydrogels and partially digested to allow for reversible swelling of the sample-gel hybrid in a temperature-dependent manner. We first synthesized hydrogels exhibiting lower critical solution temperature (LCST)- and upper critical solution temperature (UCST)-phase transition properties with N-alkyl acrylamide or sulfobetaine monomers, respectively. We then formed covalent hybrids between the LCST or UCST hydrogel and biomolecules across the cultured cells and tissues. The resulting hybrid could be reversibly swelled or deswelled in a temperature-dependent manner, with LCST- and UCST-based hybrids negatively and positively responding to the increase in temperature (termed thermonegative RevExM and thermopositive RevExM, respectively). We further showed reliable imaging of both unexpanded and expanded cells and tissues and demonstrated minimal distortions from the original sample using conventional confocal microscopy. Thus, T-RevExM enables easy adjustment of the size of biological samples and therefore the effective magnification and resolution of the sample, simply by changing the sample temperature.

Selective capture of circulating tumor cells by antifouling nanostructure substrate made of hydrogel nanoparticles

The detection and analysis of circulating tumor cells (CTCs) from cancer patients' blood samples present a powerful means to monitor cancer progression. In this work, an antifouling nanostructure substrate made of hydrogel nanoparticles was fabricated for an effective capture of CTCs from the blood samples. The hydrogel nanoparticles were synthesized by zwitterionic sulfobetaine methacrylate (SBMA), methacrylic acid (MAA) and N, N'-methylene bisacrylamide (MBA) through a simple polymerization. SBMA could provide an effective antifouling layer for the substrate to prevent nonspecific cell adhesion, MAA could afford active carboxyl groups for the immobilization of antibody to achieve specific CTC capture, and the nanostructured surface could improve the interaction of the target cells with the antibody modified substrate surface to enhance the capture efficiency of CTCs. Moreover, it was not necessary to further modify the antifouling molecules on the hydrogel nanoparticle substrate's surface, reducing the complexity and difficulty of the substrate preparation. The results showed that about 87 % of target cells (MCF-7 cells) were captured on the antibody modified hydrogel nanoparticle substrate. In contrast, the substrate showed little adhesive capacity for the nonspecific cells (K562 cells), and only 0.15 % of cells were captured. And 98 % of the captured cells kept good cell viability. Finally, 1-32 CTCs/mL were detected from the blood samples of five cancer patients, while no CTC was found in five healthy samples. It is envisaged that the new hydrogel nanostructure substrate is capable of capturing CTCs efficiently and specifically from patient blood samples to be used in cancer treatment.

Stimuli-Responsive Zwitterionic Core-Shell Microgels for Antifouling Surface Coatings

Fouling on filtration membranes is induced by the nonspecific interactions between the membrane surface and the foulants, and effectively hinders their efficient use in various applications. Here, we established a facile method for the coating of membrane surface with a dual stimuli-responsive antifouling microgel system enriched with a high polyzwitterion content. Different poly(sulfobetaine) (PSB) zwitterionic polymers with defined molecular weights and narrow dispersities were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization and integrated onto poly(N-vinylcaprolactam) (PVCL) microgels via a controlled dosage of a cross-linker, adapting a precipitation polymerization technique to obtain a core-shell microstructure. Increasing the PSB macro-RAFT concentration resulted in a shift of both upper critical solution temperature and lower critical solution temperature toward higher temperatures. Cryogenic transmission electron microscopy at different temperatures suggested the formation of a core-shell morphology with a PVCL-rich core and a PSB-rich shell. On the other hand, the significant variations of different characteristic proton signals and reversible phase transitions of the microgel constituents were confirmed by temperature-dependent ¹H NMR studies. Utilizing a quartz crystal microbalance with dissipation monitoring, we have been able to observe and quantitatively describe the antipolyelectrolyte behavior of the zwitterionic microgels. The oscillation frequency of the sensor proved to change reversibly according to the variations of the NaCl concentration, showing, in fact, the effect of the interaction between the salt and the opposite charges present in the microgel deposited on the sensor. Poly(ethersulfone) membranes, chosen as the model surface, when functionalized with zwitterionic microgel coatings, displayed protein-repelling property, stimulated by different transition temperatures, and showed even better performances at increasing NaCl concentration. These kinds of stimuli-responsive zwitterionic microgel can act as temperature-triggered drug delivery systems and as potential coating materials to prevent bioadhesion and biofouling as well.

Structure-controlled zwitterionic nanocapsules with thermal-responsiveness

A facile approach is established to prepare zwitterionic nanocapsules (ZN C s) with controlled diameters and core/shell structures based on an inverse reversible addition-fragmentation transfer (RAFT) miniemulsion interfacial polymerization method. The diameters and core volume fractions of ZNCs can be tuned finely from 61 to 220 nm and from 0.22 to 0.61, respectively. Furthermore, the thermal-responsive property of the prepared zwitterionic nanocapsules was systematically studied relating to core/shell ratios and cross-linking degrees. These ZNCs could be particularly useful in constructing polymeric materials with well-defined nanoporous structures for nano-void membranes, drug delivery devices and catalytic carriers.

Dual-Temperature-Responsive Microgels from a Zwitterionic Functional Graft Copolymer with Superior Protein Repelling Property

In this work, we developed a synthetic strategy to synthesize dual-temperature-responsive low surface fouling zwitterionic microgels. Statistical poly(N-vinylcaprolactam-co-glycidyl methacrylate) copolymers were synthesized by RAFT polymerization and post-modified by thiol-epoxy click reaction with thiol end-group-modified poly(sulfobetaine) macro-RAFT (PSB-SH) to obtain poly(N-vinylcaprolactam-co-glycidyl methacrylate)-graft-poly(sulfobetaine) (PVCL-co-PGMA-g-PSB) graft copolymers. Synthesized graft copolymers were cross-linked by diamine cross-linker in water-in-oil (w/o) inverse mini-emulsion to obtain zwitterionic microgels. Using this approach, we synthesized microgels with unique microstructure, high loading and uniform distribution of poly(sulfobetaine) chains, which exhibits tunable dual-volume phase transition temperatures. The microgels also showed excellent antifouling property reflected in strongly reduced protein absorption on a microgel-coated surface observed in real time by a Quartz Crystal Microbalance with Dissipation (QCM-D) monitoring experiment with continuous flow of protein solution. Therefore, this kind of zwitterionic microgel can be potentially used for temperature-triggered drug delivery and anti-bioadhesion coating material as well.

Thermoresponsive properties of poly(acrylamide-co-acrylonitrile)-based diblock copolymers synthesized (by PISA) in water

UCST-type poly(acrylamide-co-acrylonitrile) diblock copolymers synthesized in water (by PISA) can not only undergo reversible temperature-induced chain dissociation, but also temperature-induced morphological transition.

Novel D–π-A and A–π-D–π-A three-component photoinitiating systems based on carbazole/triphenylamino based chalcones and application in 3D and 4D printing

A series of carbazole or triphenylamine based mono-chalcones, displaying either D–π-A or A–π-D–π-A architecture have been designed as photoinitiators for 3D and 4D printing.

Biodegradable zwitterionic nanoparticles with tunable UCST-type phase separation under physiological conditions

Thermo-responsive polymeric nanoparticles (NPs) are emerging as a powerful tool in nanomedicine for the fabrication of advanced drug delivery systems. In addition to their size and biodegradation rate, phase separation of NPs upon application of a thermal stimulus provides an additional switch to control the rate of release of active components. Among the materials currently developed for biomedical applications, NPs stabilized by zwitterionic polymers are gaining increasing interest due to their high stability and ability to escape the body immune response. Yet, biodegradable zwitterionic NPs with temperature response under physiological conditions are currently not available. Here, we develop a new class of biodegradable zwitterionic NPs that exhibit UCST phase transition in the biological temperature range (T = 30-45 °C) and in physiological solution (i.e. 0.9% w/w NaCl). We design a strategy that relies on the self-assembly of block copolymers produced via reversible addition-fragmentation chain transfer (RAFT) emulsion polymerization. These copolymers comprise a zwitterionic portion exhibiting an upper critical solution temperature (UCST) and a biodegradable hydrophobic block consisting of oligoesters functionalized with a vinyl group. This modular macromolecular architecture allows us to independently control a variety of NP properties by modifying the individual components of the copolymer. In particular, the zwitterionic block of the copolymers controls the UCST-type phase separation behavior, while the number of the oligoester repeating units governs the size of the NPs and the length of the oligoester dictates the degradation rate. After demonstrating the synthesis of highly controlled degradable NPs, we show the potential of this new class of materials in the context of drug delivery by controlling the release of a drug-mimic molecule upon temperature variations in a broad time range from few minutes to 20 hours.

Modern Strategies To Achieve Tissue-Mimetic, Mechanically Robust Hydrogels

Hydrogels are frequently used biomaterials due to their similarity in hydration and structure to biological tissues. However, their utility is limited by poor mechanical properties, namely, a lack of strength and stiffness that mimic that of tissues, particularly load-bearing tissues. Thus, numerous recent strategies have sought to enhance and tune these properties in hydrogels, including interpenetrating networks (IPNs), macromolecular cross-linking, composites, thermal conditioning, polyampholytes, and dual cross-linking. Individually, these approaches have achieved hydrogels with either high strength (σ f > 10 MPa), high stiffness (E > 1 MPa), or, less commonly, both high strength and stiffness (σ f > 10 MPa and E > 1 MPa). However, only certain unique combinations of these approaches have been able to synergistically achieve retention of a high, tissuelike water content as well as high strength and stiffness. Applying such methods to stimuli-responsive hydrogels has also produced robust, smart biomaterials. Overall, methods to achieve hydrogels that simultaneously mimic the hydration, strength, and stiffness of soft and load-bearing tissues have the potential to be used in a much broader range of biomedical applications.

Reversible Self-Assembly Nanovesicle of UCST Response Prepared with Multi-l-arginyl-poly-l-aspartate Conjugated with Polyethylene Glycol

Multi-L-arginyl-poly-L-aspartate (MAPA), also known as cyanophycin, containing a backbone of polyaspartate with arginine and lysine as side chains, was prepared with recombinant Escherichia coli. The insoluble part (iMAPA) was conjugated with polyethylene glycol (PEG) at two different levels, high (iMAPA(PEG)h) and low (iMAPA(PEG)l). Both levels of conjugation exhibited UCST (upper critical solution temperature)-type responses in the pH range of 3-10 at a concentration of 2 mg/mL. The cloud-point temperature of each conjugate also showed a positive correlation with concentration in PBS, falling between 20 to 58 °C at a concentration from 0.1 to 3 mg/mL. Hysteresis was observed to follow approximate paths under the same condition during repeated heating and cooling. Notably, the reversible formation of core-shell vesicles appeared at room temperature in PBS with a size of around 25 to 60 nm, as measured by DLS and observed under TEM. The reversibility was further employed to encapsulate doxorubicin (Dox) at different weight ratios of Dox to iMAPA(PEG)h. An encapsulation efficiency could reach as high as 70% with an equivalent loading capacity of 1.5 mg Dox/mg iMAPA(PEG)h. The Dox-loaded vesicles stayed stable at 4 °C for up to 4 weeks, with a minimal leakage below 2% and a slightly dilated morphology. Temperature-triggered release of Dox from the vesicles could be achieved by a step change of 5 °C successively from 37 to 62 °C in an effort to induce an initial 10% release at 37 °C gradually to complete release at 62 °C.

Tunable Dual-Thermoresponsive Core-Shell Nanogels Exhibiting UCST and LCST Behavior

Thermoresponsive polymers change their physical properties as the temperature is changed and have found extensive use in a number of fields, especially in tissue engineering and in the development of drug delivery systems. The synthesis of a novel core-shell nanogel composed of N-isopropylacrylamide and sulfobetaine by reversible addition fragmentation chain transfer polymerization is reported. The core-shell architecture of the nanogels is confirmed using energy dispersive X-ray spectroscopy in scanning transmission electron microscopy. These nanogels exhibit dual thermoresponsive behavior, i.e., the core of the nanogel exhibits lower critical solution temperature, while the shell displays upper critical solution temperature behavior. Transition temperatures can be easily tuned by changing the molecular weight of the constituent polymer. These nanogels can be efficiently used in temperature-triggered delivery of therapeutic proteins and drugs.

Multi-responsive hydrogels with UCST- and LCST-induced shrinking and controlled release behaviors of rhodamine B

By using a disulfide-functionalized crosslinker, a pH- and thermo-responsive 2-(dimethylamino) ethyl methacrylate (DMAEMA) monomer and a zwitterionic sulfobetaine methacrylate (SBMA) monomer were conjugated to fabricate a multi-responsive P(DMAEMA-SS-SBMA) copolymeric hydrogel. Apparent UCST and LCST volume transitions were observed in the P(DMAEMA-SS-SBMA) hydrogels with equivalent weight fractions of monomers. Different pore size and response sensitivity of shrunken structures below UCST and above LCST were visualized by SEM images. The hydrogel exhibited a highly swollen state with a swelling ratio of 17.8 and a pore size of 106μm at 45°C, they deswelled unequally at 5°C with a compact surface with pore size of 30μm and a loose bulk with pore size of 83μm, while they deswelled uniformly at 65°C with dense shrunken structure with small pore size of 12μm. The dual-thermoresponsive hydrogel was promising in controlled drug release. The initial drug release was predominantly controlled by diffusion, and the long-term release was influenced by the swelling ratio. Below UCST, the relatively hydrophilic shrunken structure and slow diffusion had a synergistic effect on the sustained release. Above LCST, the fast diffusion and the rapid "off" effect of hydrophobic skin layer resulted in a burst release. Additionally, pH-tunable swelling and redox-sensitive degradation were also observed.

An in situ-forming zwitterionic hydrogel as vitreous substitute

An in situ-forming zwitterionic gel as vitreous substitute.

Thermophilic films and fibers from photo cross-linkable UCST-type polymers

Photo cross-linkable thermoresponsive polymers of UCST-type and the corresponding thermophilic films and fibers are presented for use in biofabrication and microactuators.

Zwitterionic copolymer-based and hydrogen bonding-strengthened self-healing hydrogel

We report here a zwitterionic copolymer based non-covalently cross-linked hydrogel with intrinsic self-healing nature for potential use in enhanced oil recovery.

On the hydrophilicity of polyzwitterion poly (N,N-dimethyl-N-(3-(methacrylamido)propyl)ammoniopropane sulfonate) in water, deuterated water, and aqueous salt solutions

A series of zwitterionic model polymers with defined molar masses up to 150,000 Da and defined end groups are prepared from sulfobetaine monomer N,N-dimethyl-N-(3-(methacrylamido)propyl)ammoniopropanesulfonate (SPP). Polymers are synthesized by reversible addition-fragmentation chain transfer polymerization (RAFT) using a functional chain transfer agent labeled with a fluorescent probe. Their upper critical solution temperature-type coil-to-globule phase transition in water, deuterated water, and various salt solutions is studied by turbidimetry. Cloud points increase with polyzwitterion concentration and molar mass, being considerably higher in D2O than in H2O. Moreover, cloud points are strongly affected by the amount and nature of added salts. Typically, they increase with increasing salt concentration up to a maximum value, whereas further addition of salt lowers the cloud points again, mostly down to below freezing point. The different salting-in and salting-out effects of the studied anions can be correlated with the Hofmeister series. In physiological sodium chloride solution and in phosphate buffered saline (PBS), the cloud point is suppressed even for high molar mass samples. Accordingly, SPP-polymers behave strongly hydrophilic under most conditions encountered in biomedical applications. However, the direct transfer of results from model studies in D2O, using, e.g. (1)H NMR or neutron scattering techniques, to 'normal' systems in H2O is not obvious.