1
|
Melo SF, Nondonfaz A, Aqil A, Pierrard A, Hulin A, Delierneux C, Ditkowski B, Gustin M, Legrand M, Tullemans BME, Brouns SLN, Nchimi A, Carrus R, Dejosé A, Heemskerk JWM, Kuijpers MJE, Ritter J, Steinseifer U, Clauser JC, Jérôme C, Lancellotti P, Oury C. Design, manufacturing and testing of a green non-isocyanate polyurethane prosthetic heart valve. Biomater Sci 2024; 12:2149-2164. [PMID: 38487997 DOI: 10.1039/d3bm01911j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/17/2024]
Abstract
The sole effective treatment for most patients with heart valve disease is valve replacement by implantation of mechanical or biological prostheses. However, mechanical valves represent high risk of thromboembolism, and biological prostheses are prone to early degeneration. In this work, we aim to determine the potential of novel environmentally-friendly non-isocyanate polyurethanes (NIPUs) for manufacturing synthetic prosthetic heart valves. Polyhydroxyurethane (PHU) NIPUs are synthesized via an isocyanate-free route, tested in vitro, and used to produce aortic valves. PHU elastomers reinforced with a polyester mesh show mechanical properties similar to native valve leaflets. These NIPUs do not cause hemolysis. Interestingly, both platelet adhesion and contact activation-induced coagulation are strongly reduced on NIPU surfaces, indicating low thrombogenicity. Fibroblasts and endothelial cells maintain normal growth and shape after indirect contact with NIPUs. Fluid-structure interaction (FSI) allows modeling of the ideal valve design, with minimal shear stress on the leaflets. Injection-molded valves are tested in a pulse duplicator and show ISO-compliant hydrodynamic performance, comparable to clinically-used bioprostheses. Poly(tetrahydrofuran) (PTHF)-NIPU patches do not show any evidence of calcification over a period of 8 weeks. NIPUs are promising sustainable biomaterials for the manufacturing of improved prosthetic valves with low thrombogenicity.
Collapse
Affiliation(s)
- Sofia F Melo
- Laboratory of Cardiology, GIGA-Cardiovascular Sciences, University of Liège, Avenue de l'Hôpital 11, B34, 4000 Liège, Belgium.
| | - Alicia Nondonfaz
- Laboratory of Cardiology, GIGA-Cardiovascular Sciences, University of Liège, Avenue de l'Hôpital 11, B34, 4000 Liège, Belgium.
| | - Abdelhafid Aqil
- Center for Education and Research on Macromolecules (CERM), CESAM Research Unit, Department of Chemistry, University of Liège, Allée du 6 août 13, B6a, 4000 Liège, Belgium
| | - Anna Pierrard
- Center for Education and Research on Macromolecules (CERM), CESAM Research Unit, Department of Chemistry, University of Liège, Allée du 6 août 13, B6a, 4000 Liège, Belgium
| | - Alexia Hulin
- Laboratory of Cardiology, GIGA-Cardiovascular Sciences, University of Liège, Avenue de l'Hôpital 11, B34, 4000 Liège, Belgium.
| | - Céline Delierneux
- Laboratory of Cardiology, GIGA-Cardiovascular Sciences, University of Liège, Avenue de l'Hôpital 11, B34, 4000 Liège, Belgium.
| | - Bartosz Ditkowski
- Laboratory of Cardiology, GIGA-Cardiovascular Sciences, University of Liège, Avenue de l'Hôpital 11, B34, 4000 Liège, Belgium.
| | - Maxime Gustin
- Laboratory of Cardiology, GIGA-Cardiovascular Sciences, University of Liège, Avenue de l'Hôpital 11, B34, 4000 Liège, Belgium.
| | - Maxime Legrand
- Sirris, Liège Science Park, Rue du Bois Saint-Jean 12, 4102 Seraing, Belgium
| | - Bibian M E Tullemans
- Cardiovascular Research Institute Maastricht (CARIM), Department of Biochemistry, Maastricht University, Universiteitssingel 50, 6200 MD Maastricht, The Netherlands
| | - Sanne L N Brouns
- Cardiovascular Research Institute Maastricht (CARIM), Department of Biochemistry, Maastricht University, Universiteitssingel 50, 6200 MD Maastricht, The Netherlands
| | - Alain Nchimi
- Laboratory of Cardiology, GIGA-Cardiovascular Sciences, University of Liège, Avenue de l'Hôpital 11, B34, 4000 Liège, Belgium.
| | - Raoul Carrus
- Sirris, Liège Science Park, Rue du Bois Saint-Jean 12, 4102 Seraing, Belgium
| | - Astrid Dejosé
- Sirris, Liège Science Park, Rue du Bois Saint-Jean 12, 4102 Seraing, Belgium
| | - Johan W M Heemskerk
- Cardiovascular Research Institute Maastricht (CARIM), Department of Biochemistry, Maastricht University, Universiteitssingel 50, 6200 MD Maastricht, The Netherlands
| | - Marijke J E Kuijpers
- Cardiovascular Research Institute Maastricht (CARIM), Department of Biochemistry, Maastricht University, Universiteitssingel 50, 6200 MD Maastricht, The Netherlands
| | - Jan Ritter
- Department of Cardiovascular Engineering, Institute of Applied Medical Engineering, Medical Faculty RWTH Aachen University, Pauwelsstraße 20, 52074 Aachen, Germany
| | - Ulrich Steinseifer
- Department of Cardiovascular Engineering, Institute of Applied Medical Engineering, Medical Faculty RWTH Aachen University, Pauwelsstraße 20, 52074 Aachen, Germany
| | - Johanna C Clauser
- Department of Cardiovascular Engineering, Institute of Applied Medical Engineering, Medical Faculty RWTH Aachen University, Pauwelsstraße 20, 52074 Aachen, Germany
| | - Christine Jérôme
- Center for Education and Research on Macromolecules (CERM), CESAM Research Unit, Department of Chemistry, University of Liège, Allée du 6 août 13, B6a, 4000 Liège, Belgium
| | - Patrizio Lancellotti
- Laboratory of Cardiology, GIGA-Cardiovascular Sciences, University of Liège, Avenue de l'Hôpital 11, B34, 4000 Liège, Belgium.
| | - Cécile Oury
- Laboratory of Cardiology, GIGA-Cardiovascular Sciences, University of Liège, Avenue de l'Hôpital 11, B34, 4000 Liège, Belgium.
| |
Collapse
|
2
|
Hong SM, Kwon HJ, Sun JM, Lee CW. Synthesis and Characteristic Valuation of a Thermoplastic Polyurethane Electrode Binder for In-Mold Coating. Polymers (Basel) 2024; 16:375. [PMID: 38337264 DOI: 10.3390/polym16030375] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/03/2024] [Revised: 01/22/2024] [Accepted: 01/27/2024] [Indexed: 02/12/2024] Open
Abstract
A polyurethane series (PHEI-PU) was prepared via a one-shot bulk polymerization method using hexamethylene diisocyanate (HDI), polycarbonate diol (PCD), and isosorbide derivatives (ISBD) as chain extenders. The mechanical properties were evaluated using a universal testing machine (UTM), and the thermal properties were evaluated using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The PHEI-PU series exhibited excellent mechanical properties with an average tensile strength of 44.71 MPa and an elongation at break of 190%. To verify the applicability of different proportions of PU as an electrode binder, PU and Ag flakes were mixed (30/70 wt%) and coated on PCT substrates, the electrodes were evaluated by four-point probe before and after 50% elongation, and the dispersion was evaluated by scanning electron microscopy (SEM). The electrical resistance change rate of PHEI-PU series was less than 20%, and a coating layer with well-dispersed silver flakes was confirmed even after stretching. Therefore, it exhibited excellent physical properties, heat resistance, and electrical resistance change rate, confirming its applicability as an electrode binder for in-mold coating.
Collapse
Affiliation(s)
- Suk-Min Hong
- Department of Chemistry, College of Science and Technology, Dankook University, Cheonan 31116, Republic of Korea
| | - Hyuck-Jin Kwon
- Department of Chemistry, College of Science and Technology, Dankook University, Cheonan 31116, Republic of Korea
| | - Jung-Min Sun
- Department of Chemistry, College of Science and Technology, Dankook University, Cheonan 31116, Republic of Korea
| | - Chil Won Lee
- Department of Chemistry, College of Science and Technology, Dankook University, Cheonan 31116, Republic of Korea
| |
Collapse
|
3
|
Karlsson I, Ponting DJ, Ortega MA, Niklasson IB, Ndreu L, Stéen EJL, Seifert T, Luthman K, Karlberg AT. Nature-Derived Epoxy Resin Monomers with Reduced Sensitizing Capacity─Isosorbide-Based Bis-Epoxides. Chem Res Toxicol 2023; 36:281-290. [PMID: 36652206 PMCID: PMC9945177 DOI: 10.1021/acs.chemrestox.2c00347] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/19/2023]
Abstract
Epoxy resin systems (ERSs) are a class of thermosetting resins that become thermostable and insoluble polymers upon curing. They are widely used as components of protective surfaces, adhesives, and paints and in the manufacturing of composites in the plastics industry. The diglycidyl ether of bisphenol A (DGEBA) is used in 75-90% of ERSs and is thus by far the most used epoxy resin monomer (ERM). Unfortunately, DGEBA is a strong skin sensitizer and it is one of the most common causes of occupational contact dermatitis. Furthermore, DGEBA is synthesized from bisphenol A (BPA), which is a petroleum-derived chemical with endocrine-disruptive properties. In this work, we have used isosorbide, a renewable and nontoxic sugar-based material, as an alternative to BPA in the design of ERMs. Three different bis-epoxide isosorbide derivatives were synthesized: the diglycidyl ether of isosorbide (1) and two novel isosorbide-based bis-epoxides containing either a benzoic ester (2) or a benzyl ether linkage (3). Assessment of the in vivo sensitizing potency of the isosorbide bis-epoxides in the murine local lymph node assay (LLNA) showed that all three compounds were significantly less sensitizing than DGEBA, especially 2 which was nonsensitizing up to 25% w/v. The peptide reactivity showed the same order of reactivity as the LLNA, i.e., 2 being the least reactive, followed by 3 and then 1, which displayed similar peptide reactivity as DGEBA. Skin permeation of 2 and 3 was compared to DGEBA using ex vivo pig skin and static Franz cells. The preliminary investigations of the technical properties of the polymers formed from 1-3 were promising. Although further investigations of the technical properties are needed, all isosorbide bis-epoxides have the potential to be less sensitizing renewable replacements of DGEBA, especially 2 that had the lowest sensitizing potency in vivo as well as the lowest peptide reactivity.
Collapse
Affiliation(s)
- Isabella Karlsson
- Department of Environmental Science, Exposure and Effect, Stockholm University, SE-106 91Stockholm, Sweden
| | - David J Ponting
- Department of Chemistry and Molecular Biology, Dermatochemistry and Skin Allergy, University of Gothenburg, SE-412 96Gothenburg, Sweden
| | - Miguel A Ortega
- Department of Chemistry and Molecular Biology, Dermatochemistry and Skin Allergy, University of Gothenburg, SE-412 96Gothenburg, Sweden
| | - Ida B Niklasson
- Department of Chemistry and Molecular Biology, Dermatochemistry and Skin Allergy, University of Gothenburg, SE-412 96Gothenburg, Sweden
| | - Lorena Ndreu
- Department of Environmental Science, Exposure and Effect, Stockholm University, SE-106 91Stockholm, Sweden
| | - E Johanna L Stéen
- Department of Chemistry and Molecular Biology, Dermatochemistry and Skin Allergy, University of Gothenburg, SE-412 96Gothenburg, Sweden
| | - Tina Seifert
- Department of Chemistry and Molecular Biology, Medicinal Chemistry, University of Gothenburg, SE-412 96Gothenburg, Sweden
| | - Kristina Luthman
- Department of Chemistry and Molecular Biology, Medicinal Chemistry, University of Gothenburg, SE-412 96Gothenburg, Sweden
| | - Ann-Therese Karlberg
- Department of Chemistry and Molecular Biology, Dermatochemistry and Skin Allergy, University of Gothenburg, SE-412 96Gothenburg, Sweden
| |
Collapse
|
4
|
dos Santos Silva ID, Albuquerque A, Boskamp L, Ries A, Haag K, Koschek K, Wellen R. Synthesis of bio‐polyurethanes with isosorbide and propanediol based poly(lactic acid) diol. J Appl Polym Sci 2023. [DOI: 10.1002/app.53623] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/19/2023]
Affiliation(s)
- Ingridy Dayane dos Santos Silva
- Academic Unit of Materials Engineering Federal University of Campina Grande Campina Grande Brazil
- Fraunhofer Institute for Environmental, Safety and Energy Technology UMSICHT Oberhausen Germany
| | - Ananda Albuquerque
- Academic Unit of Materials Engineering Federal University of Campina Grande Campina Grande Brazil
| | - Laura Boskamp
- Department Polymeric Materials and Mechanical Engineering Fraunhofer Institute for Manufacturing Technology and Advanced Materials Bremen Germany
| | - Andreas Ries
- Multidisciplinary Center for Technological Investigations National University of Asunción, San Lorenzo University Campus San Lorenzo Paraguay
| | - Katharina Haag
- Department Polymeric Materials and Mechanical Engineering Fraunhofer Institute for Manufacturing Technology and Advanced Materials Bremen Germany
| | - Katharina Koschek
- Department Polymeric Materials and Mechanical Engineering Fraunhofer Institute for Manufacturing Technology and Advanced Materials Bremen Germany
| | - Renate Wellen
- Academic Unit of Materials Engineering Federal University of Campina Grande Campina Grande Brazil
- Materials Engineering Department Federal University of Paraiba João Pessoa Brazil
| |
Collapse
|
5
|
Recent Progress of Non-Isocyanate Polyurethane Foam and Their Challenges. Polymers (Basel) 2023; 15:polym15020254. [PMID: 36679134 PMCID: PMC9866265 DOI: 10.3390/polym15020254] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/16/2022] [Revised: 12/28/2022] [Accepted: 12/30/2022] [Indexed: 01/06/2023] Open
Abstract
Polyurethane foams (PUFs) are a significant group of polymeric foam materials. Thanks to their outstanding mechanical, chemical, and physical properties, they are implemented successfully in a wide range of applications. Conventionally, PUFs are obtained in polyaddition reactions between polyols, diisoycyanate, and water to get a CO2 foaming agent. The toxicity of isocyanate has attracted considerable attention from both scientists and industry professionals to explore cleaner synthesis routes for polyurethanes excluding the use of isocyanate. The polyaddition of cyclic carbonates (CCs) and polyfunctional amines in the presence of an external blowing agent or by self-blowing appears to be the most promising route to substitute the conventional PUFs process and to produce isocyanate-free polyurethane foams (NIPUFs). Especially for polyhydroxyurethane foams (PHUFs), the use of a blowing agent is essential to regenerate the gas responsible for the creation of the cells that are the basis of the foam. In this review, we report on the use of different blowing agents, such as Poly(methylhydrogensiloxane) (PHMS) and liquid fluorohydrocarbons for the preparation of NIPUFs. Furthermore, the preparation of NIPUFs using the self-blowing technique to produce gas without external blowing agents is assessed. Finally, various biologically derived NIPUFs are presented, including self-blown NIPUFs and NIPUFs with an external blowing agent.
Collapse
|
6
|
Mouren A, Avérous L. Sustainable cycloaliphatic polyurethanes: from synthesis to applications. Chem Soc Rev 2023; 52:277-317. [PMID: 36520183 DOI: 10.1039/d2cs00509c] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/16/2022]
Abstract
Polyurethanes (PUs) are a versatile and major polymer family, mainly produced via polyaddition between polyols and polyisocyanates. A large variety of fossil-based building blocks is commonly used to develop a wide range of macromolecular architectures with specific properties. Due to environmental concerns, legislation, rarefaction of some petrol fractions and price fluctuation, sustainable feedstocks are attracting significant attention, e.g., plastic waste and biobased resources from biomass. Consequently, various sustainable building blocks are available to develop new renewable macromolecular architectures such as aromatics, linear aliphatics and cycloaliphatics. Meanwhile, the relationship between the chemical structures of these building blocks and properties of the final PUs can be determined. For instance, aromatic building blocks are remarkable to endow materials with rigidity, hydrophobicity, fire resistance, chemical and thermal stability, whereas acyclic aliphatics endow them with oxidation and UV light resistance, flexibility and transparency. Cycloaliphatics are very interesting as they combine most of the advantages of linear aliphatic and aromatic compounds. This original and unique review presents a comprehensive overview of the synthesis of sustainable cycloaliphatic PUs using various renewable products such as biobased terpenes, carbohydrates, fatty acids and cholesterol and/or plastic waste. Herein, we summarize the chemical modification of the main sustainable cycloaliphatic feedstocks, synthesis of PUs using these building blocks and their corresponding properties and subsequently present their major applications in hot-topic fields, including building, transportation, packaging and biomedicine.
Collapse
Affiliation(s)
- Agathe Mouren
- BioTeam/ICPEES-ECPM, UMR CNRS 7515, Université de Strasbourg, 25 rue Becquerel, 67087 Strasbourg Cedex 2, France.
| | - Luc Avérous
- BioTeam/ICPEES-ECPM, UMR CNRS 7515, Université de Strasbourg, 25 rue Becquerel, 67087 Strasbourg Cedex 2, France.
| |
Collapse
|
7
|
Hybrid Bisphenol A non-isocyanate polyurethane composite with Mica powder: A new insulating material. J CO2 UTIL 2023. [DOI: 10.1016/j.jcou.2022.102303] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
|
8
|
Al-Tayyem BH, Sweileh BA. Synthesis and characterization of novel bio-based polyesters and poly(ester amide)s based on isosorbide and symmetrical cyclic anhydrides. JOURNAL OF POLYMER RESEARCH 2023. [DOI: 10.1007/s10965-022-03356-0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
|
9
|
Chelike DK, Gurusamy Thangavelu SA. Biodegradable isocyanate-free polyurethane films via a noncatalytic route: facile modified polycaprolactone triol and biobased diamine as precursors. RSC Adv 2022; 13:309-319. [PMID: 36605652 PMCID: PMC9766200 DOI: 10.1039/d2ra05710g] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/10/2022] [Accepted: 12/06/2022] [Indexed: 12/24/2022] Open
Abstract
A facile synthesis of isocyanate free polyurethanes (PU) was executed by the reaction of biodegradable cyclic carbonate and sustainable diamines generated via chemical modification. The biodegradable polyol polycaprolactone triol (PCL) was transformed into a new glycerol carbonate derivative, PCL-(COOGC)3, and subjected to polyaddition with the diamines linalool diamine (LLDA), isosorbide diamine (ISODA) and hexamethylene diamine (HDA). Polyaddition of PCL-(COOGC)3 with the above diamine precursors was conducted via a one-pot reaction under catalyst-free reaction conditions prior to film casting. The above precursors were characterized by Fourier-transform infrared (FTIR) and 1H and 13C nuclear magnetic resonance spectroscopies, high-resolution mass spectrometry and electrospray ionization matrix-assisted laser desorption/ionization time-of-flight mass spectrometry, whereas the PU films were studied by attenuated total reflectance-FTIR spectroscopy, solid state 13C NMR, scanning electron microscopy, energy-dispersive X-ray spectroscopy, Raman spectroscopy, X-ray diffractometry, differential scanning calorimetry and thermogravimetric analysis. High onset degradation temperature (T d) values were observed for the PU films PU-1 (345.8 °C), PU-2 (309.6 °C) and PU-3 (344.6 °C), and further studies, including cross-link density, water contact angle, swelling behaviour and biodegradation (phosphate-buffered saline medium, pH = 7.2 at 45 °C) measurements, were conducted.
Collapse
Affiliation(s)
- Dinesh Kumar Chelike
- Department of Chemistry, SRM Institute of Science and TechnologyKattankulathurChennai 603 203Tamil NaduIndia
| | | |
Collapse
|
10
|
Quinsaat JEQ, Feghali E, van de Pas DJ, Vendamme R, Torr KM. Preparation of Biobased Nonisocyanate Polyurethane/Epoxy Thermoset Materials Using Depolymerized Native Lignin. Biomacromolecules 2022; 23:4562-4573. [PMID: 36224101 DOI: 10.1021/acs.biomac.2c00706] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
Polyurethane polymers are found in a wide range of material applications. However, the toxic nature of isocyanates used in their formulation is a major concern; hence, more environmentally friendly alternatives are of high interest in the search for new sustainable polymer materials. In this work, we present the preparation of isocyanate-free polyurethane/epoxy hybrid thermosets with a high biobased content (85-90 wt %). The isocyanate-free polyurethanes were based on polyhydroxyurethanes (PHUs) prepared from depolymerized native lignin, which we refer to as lignin hydrogenolysis oil (LHO). The LHO was functionalized with epichlorohydrin to yield the epoxidized structure (LHO-GE), which was in turn reacted with CO2 to form the cyclocarbonated species (LHO-CC). Blends of the LHO-CC and glycerol diglycidyl ether (GDGE) were cured to produce hybrid PHU/epoxy (LHO-CC/GDGE) thermosets. Thermosetting materials with flexural moduli of 4.5 GPa and flexural strengths of 160 MPa were produced by optimizing the mass ratio of the two main components and the triamine hardener. These novel biobased hybrid materials outperformed the corresponding epoxy-only thermosets and comparable hybrid PHU/epoxy materials produced from petrochemicals.
Collapse
Affiliation(s)
| | - Elias Feghali
- Scion, 49 Sala Street, Private Bag 3020, Rotorua3046, New Zealand.,Chemical Engineering Program, Notre Dame University-Louaize, Zouk Mosbeh1211, Lebanon.,Sustainable Polymer Technologies (SPOT) Team, Flemish Institute for Technological Research (Vito N.V.), Boeretang 200, Mol2400, Belgium
| | | | - Richard Vendamme
- Sustainable Polymer Technologies (SPOT) Team, Flemish Institute for Technological Research (Vito N.V.), Boeretang 200, Mol2400, Belgium.,Department of Materials and Chemistry, Physical Chemistry and Polymer Science, Vrije Universiteit Brussel, Pleinlaan 2, BrusselsB-1050, Belgium
| | - Kirk M Torr
- Scion, 49 Sala Street, Private Bag 3020, Rotorua3046, New Zealand
| |
Collapse
|
11
|
Coste G, Berne D, Ladmiral V, Negrell C, Caillol S. Non-isocyanate polyurethane foams based on six-membered cyclic carbonates. Eur Polym J 2022. [DOI: 10.1016/j.eurpolymj.2022.111392] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
12
|
Brandi F, Al‐Naji M. Sustainable Sorbitol Dehydration to Isosorbide using Solid Acid Catalysts: Transition from Batch Reactor to Continuous-Flow System. CHEMSUSCHEM 2022; 15:e202102525. [PMID: 34931452 PMCID: PMC9305242 DOI: 10.1002/cssc.202102525] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/29/2021] [Revised: 12/20/2021] [Indexed: 06/09/2023]
Abstract
Isosorbide is one of the most interesting cellulosic-derived molecules with great potential to be implemented in wide range of products that shaping our daily life. This Review describes the recent developments in the production of isosorbide from sorbitol in batch and continuous-flow systems under hydrothermal conditions using solid acid catalysts. Moreover, the current hurdles and challenges regarding the synthesis of isosorbide from cellulosic biomass in continuous-flow process using solid acid catalysts are summarized, as well as the scaling-up of this process into pilot level, which will lead to an established industrial process with high sustainability metrics.
Collapse
Affiliation(s)
- Francesco Brandi
- Department of Colloid ChemistryMax Planck Institute of Colloids and InterfacesAm Mühlenberg 114476PotsdamGermany
| | - Majd Al‐Naji
- Department of Colloid ChemistryMax Planck Institute of Colloids and InterfacesAm Mühlenberg 114476PotsdamGermany
| |
Collapse
|
13
|
Dutta S, Bhat NS. Chemocatalytic value addition of glucose without carbon-carbon bond cleavage/formation reactions: an overview. RSC Adv 2022; 12:4891-4912. [PMID: 35425469 PMCID: PMC8981328 DOI: 10.1039/d1ra09196d] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/20/2021] [Accepted: 02/02/2022] [Indexed: 01/22/2023] Open
Abstract
As the monomeric unit of the abundant biopolymer cellulose, glucose is considered a sustainable feedstock for producing carbon-based transportation fuels, chemicals, and polymers. The chemocatalytic value addition of glucose can be broadly classified into those involving C-C bond cleavage/formation reactions and those without. The C6 products obtained from glucose are particularly satisfying because their syntheses enjoy a 100% carbon economy. Although multiple derivatives of glucose retaining all six carbon atoms in their moiety are well-documented, they are somewhat dispersed in the literature and never delineated coherently from the perspective of their carbon skeleton. The glucose-derived chemical intermediates discussed in this review include polyols like sorbitol and sorbitan, diols like isosorbide, furanic compounds like 5-(hydroxymethyl)furfural, and carboxylic acids like gluconic acid. Recent advances in producing the intermediates mentioned above from glucose following chemocatalytic routes have been elaborated, and their derivative chemistry highlighted. This review aims to comprehensively understand the prospects and challenges associated with the catalytic synthesis of C6 molecules from glucose.
Collapse
Affiliation(s)
- Saikat Dutta
- Department of Chemistry, National Institute of Technology Karnataka (NITK) Surathkal Mangalore-575025 Karnataka India
| | - Navya Subray Bhat
- Department of Chemistry, National Institute of Technology Karnataka (NITK) Surathkal Mangalore-575025 Karnataka India
| |
Collapse
|
14
|
Mhd Haniffa MAC, Munawar K, Ching YC, Illias HA, Chuah CH. Bio-based Poly(hydroxy urethane)s: Synthesis and Pre/Post-Functionalization. Chem Asian J 2021; 16:1281-1297. [PMID: 33871151 DOI: 10.1002/asia.202100226] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/05/2021] [Revised: 04/06/2021] [Indexed: 11/08/2022]
Abstract
New and emerging demand for polyurethane (PU) continues to rise over the years. The harmful isocyanate binding agents and their integrated PU products are at the height of environmental concerns, in particular PU (macro and micro) pollution and their degradation problems. Non-isocyanate poly(hydroxy urethane)s (NIPUs) are sustainable and green alternatives to conventional PUs. Since the introduction of NIPU in 1957, the market value of NIPU and its hybridized materials has increased exponentially in 2019 and is expected to continue to rise in the coming years. The secondary hydroxyl groups of these NIPU's urethane moiety have revolutionized them by allowing for adequate pre/post functionalization. This minireview highlights different strategies and advances in pre/post-functionalization used in biobased NIPU. We have performed a comprehensive evaluation of the development of new ideas in this field to achieve more efficient synthetic biobased hybridized NIPU processes through selective and kinetic understanding.
Collapse
Affiliation(s)
- Mhd Abd Cader Mhd Haniffa
- Centre for Advanced Manufacturing and Material Processing, Faculty of Eangineering, University of Malaya, 50603, Kuala Lumpur, Malaysia.,Department of Chemistry, Faculty of Science, University of Malaya, 50603, Kuala Lumpur, Malaysia
| | - Khadija Munawar
- Centre for Advanced Manufacturing and Material Processing, Faculty of Eangineering, University of Malaya, 50603, Kuala Lumpur, Malaysia
| | - Yern Chee Ching
- Centre for Advanced Manufacturing and Material Processing, Faculty of Eangineering, University of Malaya, 50603, Kuala Lumpur, Malaysia.,Department of Chemical Engineering, Faculty of Engineering, University of Malaya, 50603, Kuala Lumpur, Malaysia
| | - Hazlee Azil Illias
- Centre for Advanced Manufacturing and Material Processing, Faculty of Eangineering, University of Malaya, 50603, Kuala Lumpur, Malaysia.,Department of Electrical Engineering, Faculty of Engineering, University of Malaya, 50603, Kuala Lumpur, Malaysia
| | - Cheng Hock Chuah
- Department of Chemistry, Faculty of Science, University of Malaya, 50603, Kuala Lumpur, Malaysia
| |
Collapse
|
15
|
Nanocomposites of polyhydroxyurethane with nanocrystalline cellulose: Synthesis, thermomechanical and reprocessing properties. Eur Polym J 2021. [DOI: 10.1016/j.eurpolymj.2021.110287] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022]
|
16
|
Matt L, Liblikas I, Bonjour O, Jannasch P, Vares L. Synthesis and anionic polymerization of isosorbide mono-epoxides for linear biobased polyethers. Polym Chem 2021. [DOI: 10.1039/d1py00687h] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/05/2023]
Abstract
Different regioisomeric and diastereomeric isosorbide mono-epoxides are prepared and polymerized to thermally stable and relatively rigid biobased linear polyethers.
Collapse
Affiliation(s)
- Livia Matt
- Institute of Technology, University of Tartu, Nooruse 1, Tartu 50411, Estonia
| | - Ilme Liblikas
- Institute of Technology, University of Tartu, Nooruse 1, Tartu 50411, Estonia
| | - Olivier Bonjour
- Department of Chemistry, Lund University, Box 124, Lund 221 00, Sweden
| | - Patric Jannasch
- Institute of Technology, University of Tartu, Nooruse 1, Tartu 50411, Estonia
- Department of Chemistry, Lund University, Box 124, Lund 221 00, Sweden
| | - Lauri Vares
- Institute of Technology, University of Tartu, Nooruse 1, Tartu 50411, Estonia
| |
Collapse
|
17
|
Błażek K, Beneš H, Walterová Z, Abbrent S, Eceiza A, Calvo-Correas T, Datta J. Synthesis and structural characterization of bio-based bis(cyclic carbonate)s for the preparation of non-isocyanate polyurethanes. Polym Chem 2021. [DOI: 10.1039/d0py01576h] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/04/2023]
Abstract
Full chemical structure characterization of cyclic carbonates from diepoxides synthesized using sustainable bio-based polyols with different molecular weights and carbon dioxide.
Collapse
Affiliation(s)
- Kamila Błażek
- Gdansk University of Technology
- Faculty of Chemistry
- Department of Polymers Technology
- 80-233 Gdansk
- Poland
| | - Hynek Beneš
- Institute of Macromolecular Chemistry
- CAS
- Praque 162 06
- Czech Republic
| | - Zuzana Walterová
- Institute of Macromolecular Chemistry
- CAS
- Praque 162 06
- Czech Republic
| | - Sabina Abbrent
- Institute of Macromolecular Chemistry
- CAS
- Praque 162 06
- Czech Republic
| | - Arantxa Eceiza
- Materials+Technologies’ Research Group (GMT)
- Department of Chemical and Environmental Engineering
- Polytechnic School
- University of the Basque Country
- Donostia-San Sebastian 20018
| | - Tamara Calvo-Correas
- Materials+Technologies’ Research Group (GMT)
- Department of Chemical and Environmental Engineering
- Polytechnic School
- University of the Basque Country
- Donostia-San Sebastian 20018
| | - Janusz Datta
- Gdansk University of Technology
- Faculty of Chemistry
- Department of Polymers Technology
- 80-233 Gdansk
- Poland
| |
Collapse
|
18
|
Paraskar PM, Prabhudesai MS, Kulkarni RD. Synthesis and characterizations of air-cured polyurethane coatings from vegetable oils and itaconic acid. REACT FUNCT POLYM 2020. [DOI: 10.1016/j.reactfunctpolym.2020.104734] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/29/2022]
|
19
|
Bourguignon M, Thomassin JM, Grignard B, Vertruyen B, Detrembleur C. Water-Borne Isocyanate-Free Polyurethane Hydrogels with Adaptable Functionality and Behavior. Macromol Rapid Commun 2020; 42:e2000482. [PMID: 33047423 DOI: 10.1002/marc.202000482] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/26/2020] [Revised: 09/30/2020] [Indexed: 02/02/2023]
Abstract
Polyurethane hydrogels are attractive materials finding multiple applications in various sectors of prime importance; however, they are still prepared by the toxic isocyanate chemistry. Herein the facile and direct preparation in water at room temperature of a large palette of anionic, cationic, or neutral polyurethane hydrogels by a non-isocyanate route from readily available diamines and new hydrosoluble polymers bearing cyclic carbonates is reported. The latter are synthesized by free radical polymerization of glycerin carbonated methacrylate with water-soluble comonomers. The hydrogel formation is studied at different pH and its influence on the gel time and storage modulus is investigated. Reinforced hydrogels are also constructed by adding CaCl2 to the formulation that in-situ generates CaCO3 particles. Thermoresponsive hydrogels are also prepared from new thermoresponsive cyclic carbonate bearing polymers. This work demonstrates that a multitude of non-isocyanate polyurethane hydrogels are easily accessible under mild conditions without any catalyst, opening new perspectives in the field.
Collapse
Affiliation(s)
- Maxime Bourguignon
- Center for Education and Research on Macromolecules (CERM), CESAM Research Unit, University of Liege, Chemistry Department, Sart-Tilman B6A, Liege, 4000, Belgium
| | - Jean-Michel Thomassin
- Center for Education and Research on Macromolecules (CERM), CESAM Research Unit, University of Liege, Chemistry Department, Sart-Tilman B6A, Liege, 4000, Belgium
| | - Bruno Grignard
- Center for Education and Research on Macromolecules (CERM), CESAM Research Unit, University of Liege, Chemistry Department, Sart-Tilman B6A, Liege, 4000, Belgium
| | - Bénédicte Vertruyen
- GREENMAT, CESAM Research Unit, University of Liege, Chemistry Department B6a, Liege, 4000, Belgium
| | - Christophe Detrembleur
- Center for Education and Research on Macromolecules (CERM), CESAM Research Unit, University of Liege, Chemistry Department, Sart-Tilman B6A, Liege, 4000, Belgium
| |
Collapse
|
20
|
Błażek K, Kasprzyk P, Datta J. Diamine derivatives of dimerized fatty acids and bio-based polyether polyol as sustainable platforms for the synthesis of non-isocyanate polyurethanes. POLYMER 2020. [DOI: 10.1016/j.polymer.2020.122768] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/11/2022]
|
21
|
A Sensitive Impedimetric Sensor Based on Biosourced Polyphosphine Films for the Detection of Lead Ions. CHEMOSENSORS 2020. [DOI: 10.3390/chemosensors8020034] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/24/2022]
Abstract
In this work, impedimetric sensors were developed for the detection of the four WFD heavy metals Pb2+, Cd2+, Hg2+ and Ni2+, by the modification of a gold electrode with four partially biosourced polyphosphine polymers. These polymers were obtained with satisfactory yields by polycondensation of the bis(4-fluorophenyl)(4-methylphenyl)phosphine sulfide and the bis(4-fluorophenyl)(4-methylphenyl)phosphine oxide using isosorbide or bisphenol A. The chemical structures and number-average molecular weights of the resulting polymers were determined by NMR spectroscopy (1H, 19F, and 31P) and by size exclusion chromatography. Glass transition temperatures varied between 184 and 202 °C depending on the composition of polymers. The bio-based poly(etherphosphine) oxide modified sensor showed better analytical performance than petrochemical based oxide for the detection of Pb2+. A detection limit of 10−10 g/L or 0.5 pM, which is 104 times lower than that of the anodic stripping voltammetric and the potentiometric sensors. A reversibility is obtained through rinsing of the impedimetric sensor with an EDTA solution.
Collapse
|
22
|
Chen X, Xi X, Pizzi A, Fredon E, Zhou X, Li J, Gerardin C, Du G. Preparation and Characterization of Condensed Tannin Non-Isocyanate Polyurethane (NIPU) Rigid Foams by Ambient Temperature Blowing. Polymers (Basel) 2020; 12:E750. [PMID: 32235495 PMCID: PMC7240429 DOI: 10.3390/polym12040750] [Citation(s) in RCA: 17] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/06/2020] [Revised: 03/20/2020] [Accepted: 03/27/2020] [Indexed: 11/16/2022] Open
Abstract
Ambient temperature self-blowing mimosa tannin-based non-isocyanate polyurethane (NIPU) rigid foam was produced, based on a formulation of tannin-based non-isocyanate polyurethane (NIPU) resin. A citric acid and glutaraldehyde mixture served as a blowing agent used to provide foaming energy and cross-link the tannin-derived products to synthesize the NIPU foams. Series of tannin-based NIPU foams containing a different amount of citric acid and glutaraldehyde were prepared. The reaction mechanism of tannin-based NIPU foams were investigated by Fourier Trasform InfraRed (FT-IR), Matrix Assisted Laser Desorption Ionization (MALDI-TOF) mass spectrometry, and 13C Nuclear Magnetic Resonance (13C NMR). The results indicated that urethane linkages were formed. The Tannin-based NIPU foams morphology including physical and mechanical properties were characterized by mechanical compression, by scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). All the foams prepared showed a similar open-cell morphology. Nevertheless, the number of cell-wall pores decreased with increasing additions of glutaraldehyde, while bigger foam cells were obtained with increasing additions of citric acid. The compressive mechanical properties improved with the higher level of crosslinking at the higher amount of glutaraldehyde. Moreover, the TGA results showed that the tannin-based NIPU foams prepared had similar thermal stability, although one of them (T-Fs-7) presented the highest char production and residual matter, approaching 18.7% at 790 °C.
Collapse
Affiliation(s)
- Xinyi Chen
- LERMAB, University of Lorraine, 27 rue Philippe Seguin, 88000 Epinal, France; (X.C.); (X.X.); (E.F.)
| | - Xuedong Xi
- LERMAB, University of Lorraine, 27 rue Philippe Seguin, 88000 Epinal, France; (X.C.); (X.X.); (E.F.)
| | - Antonio Pizzi
- LERMAB, University of Lorraine, 27 rue Philippe Seguin, 88000 Epinal, France; (X.C.); (X.X.); (E.F.)
| | - Emmanuel Fredon
- LERMAB, University of Lorraine, 27 rue Philippe Seguin, 88000 Epinal, France; (X.C.); (X.X.); (E.F.)
| | - Xiaojian Zhou
- Yunnan Key Laboratory of Wood Adhesives and Glue Products, Southwest Forestry University, Kunming 650224, China; (X.Z.); (J.L.); (G.D.)
| | - Jinxing Li
- Yunnan Key Laboratory of Wood Adhesives and Glue Products, Southwest Forestry University, Kunming 650224, China; (X.Z.); (J.L.); (G.D.)
| | - Christine Gerardin
- LERMAB, University of Lorraine, Boulevard des Aiguillettes, 54000 Nancy, France;
| | - Guanben Du
- Yunnan Key Laboratory of Wood Adhesives and Glue Products, Southwest Forestry University, Kunming 650224, China; (X.Z.); (J.L.); (G.D.)
| |
Collapse
|
23
|
Nonque F, Sahut A, Jacquel N, Saint-Loup R, Woisel P, Potier J. Isosorbide monoacrylate: a sustainable monomer for the production of fully bio-based polyacrylates and thermosets. Polym Chem 2020. [DOI: 10.1039/d0py00957a] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
Abstract
The radical homopolymerization of isosorbide monoacrylate (IMA) is studied to obtain transfer constants and fully bio-based thermosets.
Collapse
Affiliation(s)
- Florine Nonque
- Univ. Lille
- CNRS
- INRAE
- Centrale Lille
- UMR 8207 - UMET - Unité Matériaux et Transformations
| | | | | | | | - Patrice Woisel
- Univ. Lille
- CNRS
- INRAE
- Centrale Lille
- UMR 8207 - UMET - Unité Matériaux et Transformations
| | - Jonathan Potier
- Univ. Lille
- CNRS
- INRAE
- Centrale Lille
- UMR 8207 - UMET - Unité Matériaux et Transformations
| |
Collapse
|
24
|
Zhao B, Wei K, Wang L, Zheng S. Poly(hydroxyl urethane)s with Double Decker Silsesquioxanes in the Main Chains: Synthesis, Shape Recovery, and Reprocessing Properties. Macromolecules 2019. [DOI: 10.1021/acs.macromol.9b01976] [Citation(s) in RCA: 26] [Impact Index Per Article: 5.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022]
Affiliation(s)
- Bingjie Zhao
- Department of Polymer Science and Engineering and the State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai 200240, P. R. China
| | - Kun Wei
- Department of Polymer Science and Engineering and the State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai 200240, P. R. China
| | - Lei Wang
- Department of Polymer Science and Engineering and the State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai 200240, P. R. China
| | - Sixun Zheng
- Department of Polymer Science and Engineering and the State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai 200240, P. R. China
| |
Collapse
|
25
|
Bio-based routes to synthesize cyclic carbonates and polyamines precursors of non-isocyanate polyurethanes: A review. Eur Polym J 2019. [DOI: 10.1016/j.eurpolymj.2019.06.032] [Citation(s) in RCA: 43] [Impact Index Per Article: 8.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/02/2023]
|
26
|
Carré C, Ecochard Y, Caillol S, Avérous L. From the Synthesis of Biobased Cyclic Carbonate to Polyhydroxyurethanes: A Promising Route towards Renewable Non-Isocyanate Polyurethanes. CHEMSUSCHEM 2019; 12:3410-3430. [PMID: 31099968 DOI: 10.1002/cssc.201900737] [Citation(s) in RCA: 99] [Impact Index Per Article: 19.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/14/2019] [Indexed: 05/02/2023]
Abstract
With a global production of around 18 million tons (6th among all polymers) and a wide range of applications, such as rigid and soft foams, elastomers, coatings, and adhesives, polyurethanes (PUs) are a major polymer family. Nevertheless, they present important environmental and health issues. Recently, new and safer PUs, called non-isocyanate polyurethanes (NIPUs), have become a promising alternative to replace conventional PUs. Sustainable routes towards NIPUs are discussed herein from the perspective of green chemistry. The main focus is on the reaction between biobased carbonates and amines, which offers an interesting pathway to renewable polyhydroxyurethanes (PHUs). An overview of different routes for the synthesis of PHUs draws attention to the green synthesis of cyclic carbonate (CC) compounds and the aminolysis reaction. Current state-of-the-art of different biobased building blocks for the synthesis of PHUs focuses on CC compounds. Three classes of compounds are defined according to the feedstock: 1) vegetable fats and oils, 2) starch and sugar resources, and 3) wood derivatives. Finally, biobased PHU properties are discussed.
Collapse
Affiliation(s)
- Camille Carré
- BioTeam/ICPEES-ECPM, UMR CNRS 7515, Université de Strasbourg, 25 rue Becquerel, 67087, Strasbourg Cedex 2, France
| | - Yvan Ecochard
- ICGM, UMR 5253-CNRS, Université de Montpellier, ENSCM, 240 Avenue Emile Jeanbrau, 34296, Montpellier, France
| | - Sylvain Caillol
- ICGM, UMR 5253-CNRS, Université de Montpellier, ENSCM, 240 Avenue Emile Jeanbrau, 34296, Montpellier, France
| | - Luc Avérous
- ICGM, UMR 5253-CNRS, Université de Montpellier, ENSCM, 240 Avenue Emile Jeanbrau, 34296, Montpellier, France
| |
Collapse
|
27
|
|
28
|
Alam M. Corn oil based poly(urethane-ether-amide)/fumed silica nanocomposite coatings for anticorrosion application. INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION 2019. [DOI: 10.1080/1023666x.2019.1622719] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/26/2022]
Affiliation(s)
- Manawwer Alam
- Department of Chemistry, College of Science, King Saud University, Riyadh, Saudi Arabia
| |
Collapse
|
29
|
Quérette T, Fleury E, Sintes-Zydowicz N. Non-isocyanate polyurethane nanoparticles prepared by nanoprecipitation. Eur Polym J 2019. [DOI: 10.1016/j.eurpolymj.2019.03.006] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/27/2022]
|
30
|
Ultrasound-Assisted Heterogeneous Synthesis of Bio-Based Oligo-Isosorbide Glycidyl Ethers: Towards Greener Epoxy Precursors. Molecules 2019; 24:molecules24091643. [PMID: 31027338 PMCID: PMC6539049 DOI: 10.3390/molecules24091643] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/10/2019] [Revised: 04/23/2019] [Accepted: 04/24/2019] [Indexed: 11/21/2022] Open
Abstract
The substitution of toxic precursors such as bisphenol A by renewable and safer molecules has become a major challenge. To overcome this challenge, the 12 principles of green chemistry should be taken into account in the development of future sustainable chemicals and processes. In this context, this paper reports the highly efficient synthesis of oligo-isosorbide glycidyl ethers from bio-based starting materials by a rapid one-pot heterogeneous ultrasound-assisted synthesis. It was demonstrated that the use of high-power ultrasound in solvent-free conditions with sodium hydroxide microbeads led for the first time to a fully epoxidated prepolymer with excellent epoxy equivalent weight (EEW). The structure of the epoxy precursor was characterized by FT-IR, NMR spectroscopy and high-resolution mass spectrometry (HRMS). The efficiency of the ultrasound-assisted synthesis was attributed to the physical effects caused by micro-jets on the surface of the solid sodium hydroxide microspheres following the asymmetrical collapse of cavitation bubbles.
Collapse
|
31
|
Effects of Isosorbide Incorporation into Flexible Polyurethane Foams: Reversible Urethane Linkages and Antioxidant Activity. Molecules 2019; 24:molecules24071347. [PMID: 30959785 PMCID: PMC6479515 DOI: 10.3390/molecules24071347] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/02/2019] [Revised: 03/25/2019] [Accepted: 04/03/2019] [Indexed: 11/20/2022] Open
Abstract
Isosorbide (ISB), a nontoxic bio-based bicyclic diol composed from two fuzed furans, was incorporated into the preparation of flexible polyurethane foams (FPUFs) for use as a cell opener and to impart antioxidant properties to the resulting foam. A novel method for cell opening was designed based on the anticipated reversibility of the urethane linkages formed by ISB with isocyanate. FPUFs containing various amounts of ISB (up to 5 wt%) were successfully prepared without any noticeable deterioration in the appearance and physical properties of the resulting foams. The air permeability of these resulting FPUFs was increased and this could be further improved by thermal treatment at 160 °C. The urethane units based on ISB enabled cell window opening, as anticipated, through the reversible urethane linkage. The ISB-containing FPUFs also demonstrated better antioxidant activity by impeding discoloration. Thus, ISB, a nontoxic, bio-based diol, can be a valuable raw material (or additive) for eco-friendly FPUFs without seriously compromising the physical properties of these FPUFs.
Collapse
|
32
|
Qian W, Tan X, Su Q, Cheng W, Xu F, Dong L, Zhang S. Transesterification of Isosorbide with Dimethyl Carbonate Catalyzed by Task-Specific Ionic Liquids. CHEMSUSCHEM 2019; 12:1169-1178. [PMID: 30618199 DOI: 10.1002/cssc.201802572] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/07/2018] [Revised: 01/05/2019] [Indexed: 06/09/2023]
Abstract
Green synthesis of high-molecular-weight isosorbide-based polycarbonate (PIC) with excellent properties is a tremendous challenge and is profoundly influenced by the precursor. Herein, an ecofriendly catalyst was employed to obtain the more reactive PIC precursor dicarboxymethyl isosorbide (DC) with 99.0 % selectivity through the transesterification reaction of isosorbide with dimethyl carbonate. This is the indispensable stage of a one-pot green synthesis of PIC, playing a critical role in giving an insight into the polymerization mechanism of polymer synthesis through the melt transesterification reaction. To this end, a series of 4-substituted phenolate ionic liquids (ILs) were developed as a new type of high-efficiency catalyst for this reaction. These homogeneous ILs exhibited outstanding catalytic performances. The DC selectivity increased gradually with decreasing IL basicity; among the ILs studied, trihexyl(tetradecyl)phosphonium 4-iodophenolate ([P66614 ][4-I-Phen]) showed the highest catalytic activity. Additionally, according to the experimental results and DFT calculations, a plausible nucleophilic activation mechanism was proposed, which confirmed that the reaction is activated through the formation of H-bonds and electrostatic interactions with the IL catalyst. This strategy of tunable basicity and structure of anions in ILs affords an opportunity to develop other ILs for the transesterification reaction, thereby conveniently providing a variety of polymers through a green synthetic pathway.
Collapse
Affiliation(s)
- Wei Qian
- Key Laboratory of Green Process and Engineering, State Key Laboratory of Multiphase Complex Systems, Beijing Key Laboratory of Ionic Liquids Clean Process, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, 100190, P.R. China
- School of Chemistry and Chemical Engineering, University of Chinese Academy of Sciences, 19A Yuquan Road, Shijingshan District, Beijing, 100049, P.R. China
| | - Xin Tan
- Key Laboratory of Green Process and Engineering, State Key Laboratory of Multiphase Complex Systems, Beijing Key Laboratory of Ionic Liquids Clean Process, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, 100190, P.R. China
- School of Chemistry and Chemical Engineering, University of Chinese Academy of Sciences, 19A Yuquan Road, Shijingshan District, Beijing, 100049, P.R. China
| | - Qian Su
- Key Laboratory of Green Process and Engineering, State Key Laboratory of Multiphase Complex Systems, Beijing Key Laboratory of Ionic Liquids Clean Process, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, 100190, P.R. China
| | - Weiguo Cheng
- Key Laboratory of Green Process and Engineering, State Key Laboratory of Multiphase Complex Systems, Beijing Key Laboratory of Ionic Liquids Clean Process, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, 100190, P.R. China
| | - Fei Xu
- Key Laboratory of Green Process and Engineering, State Key Laboratory of Multiphase Complex Systems, Beijing Key Laboratory of Ionic Liquids Clean Process, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, 100190, P.R. China
| | - Li Dong
- Key Laboratory of Green Process and Engineering, State Key Laboratory of Multiphase Complex Systems, Beijing Key Laboratory of Ionic Liquids Clean Process, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, 100190, P.R. China
| | - Suojiang Zhang
- Key Laboratory of Green Process and Engineering, State Key Laboratory of Multiphase Complex Systems, Beijing Key Laboratory of Ionic Liquids Clean Process, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, 100190, P.R. China
| |
Collapse
|
33
|
Ouyang Q, Liu J, Li C, Zheng L, Xiao Y, Wu S, Zhang B. A facile method to synthesize bio-based and biodegradable copolymers from furandicarboxylic acid and isosorbide with high molecular weights and excellent thermal and mechanical properties. Polym Chem 2019. [DOI: 10.1039/c9py01314h] [Citation(s) in RCA: 18] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/29/2022]
Abstract
Biobased, biodegradable copolymers containing isosorbide and 2,5-furandicarboxylic acid with high performance are successfully synthesized through a non-solvent and economical pathway.
Collapse
Affiliation(s)
- Qing Ouyang
- Beijing National Laboratory for Molecular Sciences
- CAS Key Laboratory of Engineering Plastics
- Joint Laboratory of Polymer Science and Materials
- Centre for Molecular Science
- Institute of Chemistry Chinese Academy of Sciences (ICCAS)
| | - Jiajian Liu
- Beijing National Laboratory for Molecular Sciences
- CAS Key Laboratory of Engineering Plastics
- Joint Laboratory of Polymer Science and Materials
- Centre for Molecular Science
- Institute of Chemistry Chinese Academy of Sciences (ICCAS)
| | - Chuncheng Li
- Beijing National Laboratory for Molecular Sciences
- CAS Key Laboratory of Engineering Plastics
- Joint Laboratory of Polymer Science and Materials
- Centre for Molecular Science
- Institute of Chemistry Chinese Academy of Sciences (ICCAS)
| | - Liuchun Zheng
- Beijing National Laboratory for Molecular Sciences
- CAS Key Laboratory of Engineering Plastics
- Joint Laboratory of Polymer Science and Materials
- Centre for Molecular Science
- Institute of Chemistry Chinese Academy of Sciences (ICCAS)
| | - Yaonan Xiao
- Beijing National Laboratory for Molecular Sciences
- CAS Key Laboratory of Engineering Plastics
- Joint Laboratory of Polymer Science and Materials
- Centre for Molecular Science
- Institute of Chemistry Chinese Academy of Sciences (ICCAS)
| | - Shaohua Wu
- Beijing National Laboratory for Molecular Sciences
- CAS Key Laboratory of Engineering Plastics
- Joint Laboratory of Polymer Science and Materials
- Centre for Molecular Science
- Institute of Chemistry Chinese Academy of Sciences (ICCAS)
| | - Bo Zhang
- Beijing National Laboratory for Molecular Sciences
- CAS Key Laboratory of Engineering Plastics
- Joint Laboratory of Polymer Science and Materials
- Centre for Molecular Science
- Institute of Chemistry Chinese Academy of Sciences (ICCAS)
| |
Collapse
|
34
|
Bobbink FD, van Muyden AP, Dyson PJ. En route to CO2-containing renewable materials: catalytic synthesis of polycarbonates and non-isocyanate polyhydroxyurethanes derived from cyclic carbonates. Chem Commun (Camb) 2019; 55:1360-1373. [DOI: 10.1039/c8cc07907b] [Citation(s) in RCA: 67] [Impact Index Per Article: 13.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/05/2023]
Abstract
The strategies and challenges in the preparation of fully renewable materials prepared from CO2 and biomass enabled by catalysis are presented.
Collapse
Affiliation(s)
- Felix D. Bobbink
- Institut des Sciences et Ingénierie Chimiques
- Ecole Polytechnique Fédérale de Lausanne (EPFL)
- CH-1015 Lausanne
- Switzerland
| | - Antoine P. van Muyden
- Institut des Sciences et Ingénierie Chimiques
- Ecole Polytechnique Fédérale de Lausanne (EPFL)
- CH-1015 Lausanne
- Switzerland
| | - Paul J. Dyson
- Institut des Sciences et Ingénierie Chimiques
- Ecole Polytechnique Fédérale de Lausanne (EPFL)
- CH-1015 Lausanne
- Switzerland
| |
Collapse
|
35
|
Grignard B, Gennen S, Jérôme C, Kleij AW, Detrembleur C. Advances in the use of CO 2 as a renewable feedstock for the synthesis of polymers. Chem Soc Rev 2019; 48:4466-4514. [PMID: 31276137 DOI: 10.1039/c9cs00047j] [Citation(s) in RCA: 249] [Impact Index Per Article: 49.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/21/2022]
Abstract
Carbon dioxide offers an accessible, cheap and renewable carbon feedstock for synthesis. Current interest in the area of carbon dioxide valorisation aims at new, emerging technologies that are able to provide new opportunities to turn a waste into value. Polymers are among the most widely produced chemicals in the world greatly affecting the quality of life. However, there are growing concerns about the lack of reuse of the majority of the consumer plastics and their after-life disposal resulting in an increasing demand for sustainable alternatives. New monomers and polymers that can address these issues are therefore warranted, and merging polymer synthesis with the recycling of carbon dioxide offers a tangible route to transition towards a circular economy. Here, an overview of the most relevant and recent approaches to CO2-based monomers and polymers are highlighted with particular emphasis on the transformation routes used and their involved manifolds.
Collapse
Affiliation(s)
- Bruno Grignard
- Department of Chemistry, Center for Education and Research on Macromolecules (CERM), University of Liège, Sart-Tilman, B6A, 4000 Liège, Belgium.
| | | | | | | | | |
Collapse
|
36
|
Gregorí Valdés BS, Gomes CSB, Gomes PT, Ascenso JR, Diogo HP, Gonçalves LM, Galhano Dos Santos R, Ribeiro HM, Bordado JC. Synthesis and Characterization of Isosorbide-Based Polyurethanes Exhibiting Low Cytotoxicity Towards HaCaT Human Skin Cells. Polymers (Basel) 2018; 10:polym10101170. [PMID: 30961095 PMCID: PMC6403884 DOI: 10.3390/polym10101170] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/21/2018] [Revised: 10/12/2018] [Accepted: 10/17/2018] [Indexed: 12/02/2022] Open
Abstract
The synthesis of four samples of new polyurethanes was evaluated by changing the ratio of the diol monomers used, poly(propylene glycol) (PPG) and D-isosorbide, in the presence of aliphatic isocyanates such as the isophorone diisocyanate (IPDI) and 4,4′-methylenebis(cyclohexyl isocyanate) (HMDI). The thermal properties of the four polymers obtained were determined by DSC, exhibiting Tg values in the range 55–70 °C, and their molecular structure characterized by FTIR, 1H, and 13C NMR spectroscopies. The diffusion coefficients of these polymers in solution were measured by the Pulse Gradient Spin Echo (PGSE) NMR method, enabling the calculation of the corresponding hydrodynamic radii in diluted solution (1.62–2.65 nm). The molecular weights were determined by GPC/SEC and compared with the values determined by a quantitative 13C NMR analysis. Finally, the biocompatibility of the polyurethanes was assessed using the HaCaT keratinocyte cell line by the MTT reduction assay method showing values superior to 70% cell viability.
Collapse
Affiliation(s)
- Barbara S Gregorí Valdés
- CERENA, Departamento de Engenharia Química, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal.
- Research Institute for Medicine and Pharmaceutical Science (iMed.ULisboa), Faculty of Pharmacy, Universidade de Lisboa, Av. Prof. Gama Pinto, 1649-003 Lisboa, Portugal.
| | - Clara S B Gomes
- Centro de Química Estrutural, Departamento de Engenharia Química, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal.
| | - Pedro T Gomes
- Centro de Química Estrutural, Departamento de Engenharia Química, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal.
| | - José R Ascenso
- Centro de Química Estrutural, Departamento de Engenharia Química, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal.
| | - Hermínio P Diogo
- Centro de Química Estrutural, Departamento de Engenharia Química, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal.
| | - Lídia M Gonçalves
- Research Institute for Medicine and Pharmaceutical Science (iMed.ULisboa), Faculty of Pharmacy, Universidade de Lisboa, Av. Prof. Gama Pinto, 1649-003 Lisboa, Portugal.
| | - Rui Galhano Dos Santos
- CERENA, Departamento de Engenharia Química, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal.
| | - Helena M Ribeiro
- Research Institute for Medicine and Pharmaceutical Science (iMed.ULisboa), Faculty of Pharmacy, Universidade de Lisboa, Av. Prof. Gama Pinto, 1649-003 Lisboa, Portugal.
| | - João C Bordado
- CERENA, Departamento de Engenharia Química, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal.
| |
Collapse
|
37
|
Amorphous and Crystallizable Thermoplastic Polyureas Synthesized through a One-pot Non-isocyanate Route. CHINESE JOURNAL OF POLYMER SCIENCE 2018. [DOI: 10.1007/s10118-018-2165-0] [Citation(s) in RCA: 14] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
|
38
|
Isocyanate-Free Polyurethane Coatings and Adhesives from Mono- and Di-Saccharides. Polymers (Basel) 2018; 10:polym10040402. [PMID: 30966438 PMCID: PMC6415258 DOI: 10.3390/polym10040402] [Citation(s) in RCA: 25] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/11/2018] [Revised: 03/29/2018] [Accepted: 04/03/2018] [Indexed: 11/23/2022] Open
Abstract
Mostly biosourced non-isocyanate polyurethanes (NIPU) were prepared from mono- and disaccharides, namely glucose and sucrose, reacted with dimethyl carbonate and hexamethylene diamine. The main aim of this research was to show that NIPU can be prepared from mono- and disaccharides, this just being an initial exploratory work and its sole main aim. The oligomers obtained were detected by MALDI-ToF, CP-MAS 13C NMR, and FTIR spectrometries. The glucose-derived NIPU were shown to harden at a markedly lower temperature than the sucrose-derived ones and to be easier to handle and spread. The NIPU obtained were applied as wood and steel surface coatings and tested by the sessile drop test (on wood) and cross-cut test (on steel) with encouraging results. The glucose NIPU gave good surface coating results already at 103 °C, while the sucrose NIPU yielded good results only at a markedly higher temperature of hardening. The NIPU saccharide resins were also tested as thermosetting wood joint adhesives with the glucose NIPU yielding very encouraging results.
Collapse
|
39
|
Panchireddy S, Grignard B, Thomassin JM, Jerome C, Detrembleur C. Bio-based poly(hydroxyurethane) glues for metal substrates. Polym Chem 2018. [DOI: 10.1039/c8py00281a] [Citation(s) in RCA: 43] [Impact Index Per Article: 7.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/06/2023]
Abstract
Bio- and CO2-based high performance thermoset poly(hydroxyurethane) (PHU) glues were designed from solvent- and isocyanate-free formulations based on cyclocarbonated soybean oil, diamines (aliphatic, cycloaliphatic or aromatic) and functional silica or ZnO fillers.
Collapse
Affiliation(s)
- Satyannarayana Panchireddy
- Center for Education and Research on Macromolecules (CERM)
- CESAM Research Unit
- University of Liège
- 4000 Liège
- Belgium
| | - Bruno Grignard
- Center for Education and Research on Macromolecules (CERM)
- CESAM Research Unit
- University of Liège
- 4000 Liège
- Belgium
| | - Jean-Michel Thomassin
- Center for Education and Research on Macromolecules (CERM)
- CESAM Research Unit
- University of Liège
- 4000 Liège
- Belgium
| | - Christine Jerome
- Center for Education and Research on Macromolecules (CERM)
- CESAM Research Unit
- University of Liège
- 4000 Liège
- Belgium
| | - Christophe Detrembleur
- Center for Education and Research on Macromolecules (CERM)
- CESAM Research Unit
- University of Liège
- 4000 Liège
- Belgium
| |
Collapse
|
40
|
He X, Xu X, Wan Q, Bo G, Yan Y. Synthesis and Characterization of Dimmer-Acid-Based Nonisocyanate Polyurethane and Epoxy Resin Composite. Polymers (Basel) 2017; 9:E649. [PMID: 30965951 PMCID: PMC6418959 DOI: 10.3390/polym9120649] [Citation(s) in RCA: 16] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/07/2017] [Revised: 11/24/2017] [Accepted: 11/24/2017] [Indexed: 11/17/2022] Open
Abstract
In this study, dimmer-acid-based hybrid nonisocyanate polyurethanes (HNIPUs) were synthesized by the one-step method without catalyst. Three polyamines and two epoxy resins were selected as raw materials for HNIPU, and cyclic carbonate was synthesized based on our previous work. All of the products were characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and dynamic mechanical analysis (DMA). Then, HNIPU coatings were prepared and determined by swelling, water absorption, and water contact angle. The results showed that the HNIPU-4551 have the best mechanical and thermal properties because of its high crosslinking density. Among the different amines, it was confirmed that tetraethylenepentamine was the best amine curing agent for HNIPU coating. Meanwhile, the epoxy resin with a higher epoxy value would also form a higher crosslinking density. Those coatings showed an excellent impact strength, adhesion, flexibility, pencil hardness, hydrophilic, and appropriate crosslinking density.
Collapse
Affiliation(s)
- Xin He
- Key Laboratory of Molecular Biophysics of the Ministry of Education, College of Life Science and echnology, Huazhong University of Science and Technology, Wuhan 430074, China.
| | - Xiaoling Xu
- Key Laboratory of Molecular Biophysics of the Ministry of Education, College of Life Science and echnology, Huazhong University of Science and Technology, Wuhan 430074, China.
| | - Qian Wan
- Key Laboratory of Molecular Biophysics of the Ministry of Education, College of Life Science and echnology, Huazhong University of Science and Technology, Wuhan 430074, China.
| | - Guangxu Bo
- Key Laboratory of Molecular Biophysics of the Ministry of Education, College of Life Science and echnology, Huazhong University of Science and Technology, Wuhan 430074, China.
| | - Yunjun Yan
- Key Laboratory of Molecular Biophysics of the Ministry of Education, College of Life Science and echnology, Huazhong University of Science and Technology, Wuhan 430074, China.
| |
Collapse
|
41
|
Kasmi N, Roso M, Hammami N, Majdoub M, Boaretti C, Sgarbossa P, Vianello C, Maschio G, Modesti M, Lorenzetti A. Microwave-assisted synthesis of isosorbide-derived diols for the preparation of thermally stable thermoplastic polyurethane. Des Monomers Polym 2017; 20:547-563. [PMID: 29491826 PMCID: PMC5812175 DOI: 10.1080/15685551.2017.1395502] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/19/2017] [Accepted: 10/14/2017] [Indexed: 11/02/2022] Open
Abstract
In order to prepare thermally stable isosorbide-derived thermoplastic polyurethane, the synthesis of two new chiral exo-exo configured diols, prepared from isosorbide, and two types of diphenols (bisphenol A and thiodiphenol) was described. The synthesis conditions were optimized under conventional heating and microwave irradiations. To prove their suitability in polymerization, these monomers were successfully polymerized using 4,4'-diphenylmethane diisocyanate (MDI) and hexamethylene diisocyanate (HDI). Both monomers and polymers have been studied by NMR, FT-IR, TGA, DSC; intrinsic viscosity of polymers has also been determined. The results showed the effectiveness of the synthetic strategy proposed; moreover, a dramatic reduction of the reaction time and an important improvement of the monomers yield using microwave irradiation have been demonstrated. The monomers, as well as the polymers, showed excellent thermal stability both in air and nitrogen. It was also shown that the introduction of sulphur in the polyurethane backbone was effective in delaying the onset of degradation as well as the degradation rate.
Collapse
Affiliation(s)
- Nejib Kasmi
- Laboratory of Interfaces and Advanced Materials (LIMA), Faculty of Sciences of Monastir – Boulevard of the Environment, University of Monastir, Monastir, Tunisia
| | - Martina Roso
- Department of Industrial Engineering & INSTM UdR Padova, University of Padova, Padova, Italy
| | - Nadia Hammami
- Laboratory of Interfaces and Advanced Materials (LIMA), Faculty of Sciences of Monastir – Boulevard of the Environment, University of Monastir, Monastir, Tunisia
| | - Mustapha Majdoub
- Laboratory of Interfaces and Advanced Materials (LIMA), Faculty of Sciences of Monastir – Boulevard of the Environment, University of Monastir, Monastir, Tunisia
| | - Carlo Boaretti
- Department of Industrial Engineering & INSTM UdR Padova, University of Padova, Padova, Italy
| | - Paolo Sgarbossa
- Department of Industrial Engineering & INSTM UdR Padova, University of Padova, Padova, Italy
| | - Chiara Vianello
- Department of Industrial Engineering & INSTM UdR Padova, University of Padova, Padova, Italy
| | - Giuseppe Maschio
- Department of Industrial Engineering & INSTM UdR Padova, University of Padova, Padova, Italy
| | - Michele Modesti
- Department of Industrial Engineering & INSTM UdR Padova, University of Padova, Padova, Italy
| | - Alessandra Lorenzetti
- Department of Industrial Engineering & INSTM UdR Padova, University of Padova, Padova, Italy
| |
Collapse
|
42
|
|
43
|
Machado TO, Cardoso PB, Feuser PE, Sayer C, Araújo PH. Thiol-ene miniemulsion polymerization of a biobased monomer for biomedical applications. Colloids Surf B Biointerfaces 2017; 159:509-517. [DOI: 10.1016/j.colsurfb.2017.07.043] [Citation(s) in RCA: 24] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/23/2017] [Revised: 07/12/2017] [Accepted: 07/16/2017] [Indexed: 01/10/2023]
|
44
|
|
45
|
Jaratrotkamjorn R, Nourry A, Pasetto P, Choppé E, Panwiriyarat W, Tanrattanakul V, Pilard JF. Synthesis and characterization of elastomeric, biobased, nonisocyanate polyurethane from natural rubber. J Appl Polym Sci 2017. [DOI: 10.1002/app.45427] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Affiliation(s)
- Ruedee Jaratrotkamjorn
- Department of Materials Science and Technology, Faculty of Science; Prince of Songkla University; Songkhla 90112 Thailand
| | - Arnaud Nourry
- Unité Mixte de Recherche (France) Centre National de la Recherche Scientifique 6283, Institut des Molécules et Matériaux du Mans, Université du Maine, L’Université Nantes Angers Le Mans; Avenue Olivier Messiaen 72085 Le Mans Cedex 9 France
| | - Pamela Pasetto
- Unité Mixte de Recherche (France) Centre National de la Recherche Scientifique 6283, Institut des Molécules et Matériaux du Mans, Université du Maine, L’Université Nantes Angers Le Mans; Avenue Olivier Messiaen 72085 Le Mans Cedex 9 France
| | - Emilie Choppé
- Unité Mixte de Recherche (France) Centre National de la Recherche Scientifique 6283, Institut des Molécules et Matériaux du Mans, Université du Maine, L’Université Nantes Angers Le Mans; Avenue Olivier Messiaen 72085 Le Mans Cedex 9 France
| | - Wannarat Panwiriyarat
- Faculty of Science and Industrial Technology, Prince of Songkla University, Surat Thani Campus; Surat Thani 84000 Thailand
| | - Varaporn Tanrattanakul
- Department of Materials Science and Technology, Faculty of Science; Prince of Songkla University; Songkhla 90112 Thailand
| | - Jean-François Pilard
- Unité Mixte de Recherche (France) Centre National de la Recherche Scientifique 6283, Institut des Molécules et Matériaux du Mans, Université du Maine, L’Université Nantes Angers Le Mans; Avenue Olivier Messiaen 72085 Le Mans Cedex 9 France
| |
Collapse
|
46
|
Yuan X, Sang Z, Zhao J, Zhang Z, Zhang J, Cheng J. Synthesis and properties of non-isocyanate aliphatic thermoplastic polyurethane elastomers with polycaprolactone soft segments. JOURNAL OF POLYMER RESEARCH 2017. [DOI: 10.1007/s10965-017-1249-9] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
|
47
|
Schmidt S, Gatti FJ, Luitz M, Ritter BS, Bruchmann B, Mülhaupt R. Erythritol Dicarbonate as Intermediate for Solvent- and Isocyanate-Free Tailoring of Bio-Based Polyhydroxyurethane Thermoplastics and Thermoplastic Elastomers. Macromolecules 2017. [DOI: 10.1021/acs.macromol.6b02787] [Citation(s) in RCA: 47] [Impact Index Per Article: 6.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Affiliation(s)
- Stanislaus Schmidt
- Institute for
Macromolecular Chemistry, Stefan-Meier
Strasse 31, D-79104 Freiburg, Germany
- Freiburg Materials
Research Center, Stefan-Meier Strasse
21, D-79104 Freiburg, Germany
- JONAS - Joint Research on Advanced Materials and Systems, Advanced Materials & Systems Research, BASF SE, Carl-Bosch-Strasse 38, 67056 Ludwigshafen, Germany
| | - Felix J. Gatti
- Institute for
Macromolecular Chemistry, Stefan-Meier
Strasse 31, D-79104 Freiburg, Germany
| | - Manuel Luitz
- Institute for
Macromolecular Chemistry, Stefan-Meier
Strasse 31, D-79104 Freiburg, Germany
| | - Benjamin S. Ritter
- Institute for
Macromolecular Chemistry, Stefan-Meier
Strasse 31, D-79104 Freiburg, Germany
- Freiburg Materials
Research Center, Stefan-Meier Strasse
21, D-79104 Freiburg, Germany
| | - Bernd Bruchmann
- JONAS - Joint Research on Advanced Materials and Systems, Advanced Materials & Systems Research, BASF SE, Carl-Bosch-Strasse 38, 67056 Ludwigshafen, Germany
| | - Rolf Mülhaupt
- Institute for
Macromolecular Chemistry, Stefan-Meier
Strasse 31, D-79104 Freiburg, Germany
- Freiburg Materials
Research Center, Stefan-Meier Strasse
21, D-79104 Freiburg, Germany
| |
Collapse
|
48
|
Lambeth RH, Mathew SM, Baranoski MH, Housman KJ, Tran B, Oyler JM. Nonisocyanate polyurethanes from six-membered cyclic carbonates: Catalysis and side reactions. J Appl Polym Sci 2017. [DOI: 10.1002/app.44941] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/15/2023]
Affiliation(s)
- Robert H. Lambeth
- U.S. Army Research Laboratory; Weapons & Materials Research Directorate; 4600 Deer Creek Loop, Aberdeen Proving Ground Maryland 21005-5069
| | - Sanyo M. Mathew
- U.S. Army Research Laboratory; Weapons & Materials Research Directorate; 4600 Deer Creek Loop, Aberdeen Proving Ground Maryland 21005-5069
| | - MyVan H. Baranoski
- U.S. Army Research Laboratory; Weapons & Materials Research Directorate; 4600 Deer Creek Loop, Aberdeen Proving Ground Maryland 21005-5069
| | - Kathleen J. Housman
- U.S. Army Medical Research Institute of Chemical Defense; 3100 Ricketts Point Road, Aberdeen Proving Ground Maryland 21010
| | - Bao Tran
- Excet, Inc.; 6225 Brandon Ave, Suite 360 Springfield Virginia 22150
| | - Jonathan M. Oyler
- U.S. Army Medical Research Institute of Chemical Defense; 3100 Ricketts Point Road, Aberdeen Proving Ground Maryland 21010
| |
Collapse
|
49
|
Blain M, Cornille A, Boutevin B, Auvergne R, Benazet D, Andrioletti B, Caillol S. Hydrogen bonds prevent obtaining high molar mass PHUs. J Appl Polym Sci 2017. [DOI: 10.1002/app.44958] [Citation(s) in RCA: 32] [Impact Index Per Article: 4.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/28/2022]
Affiliation(s)
- Marine Blain
- Institut Charles Gerhardt UMR 5253 - CNRS; Université Montpellier; ENSCM - 8, Rue Ecole Normale Montpellier 34296 France
- Université Claude Bernard Lyon 1, Université de Lyon, ICBMS UMR CNRS 5246, Bâtiment Curien (CPE); 43 Bd du 11 Novembre 1918 Villeurbanne Cedex 69 622 France
- JUXTA; 5 rue de la Jalesie, BP 71039 Audincourt Cedex 25401 France
| | - Adrien Cornille
- Institut Charles Gerhardt UMR 5253 - CNRS; Université Montpellier; ENSCM - 8, Rue Ecole Normale Montpellier 34296 France
| | - Bernard Boutevin
- Institut Charles Gerhardt UMR 5253 - CNRS; Université Montpellier; ENSCM - 8, Rue Ecole Normale Montpellier 34296 France
| | - Rémi Auvergne
- Institut Charles Gerhardt UMR 5253 - CNRS; Université Montpellier; ENSCM - 8, Rue Ecole Normale Montpellier 34296 France
| | | | - Bruno Andrioletti
- Université Claude Bernard Lyon 1, Université de Lyon, ICBMS UMR CNRS 5246, Bâtiment Curien (CPE); 43 Bd du 11 Novembre 1918 Villeurbanne Cedex 69 622 France
| | - Sylvain Caillol
- Institut Charles Gerhardt UMR 5253 - CNRS; Université Montpellier; ENSCM - 8, Rue Ecole Normale Montpellier 34296 France
| |
Collapse
|
50
|
Beniah G, Uno BE, Lan T, Jeon J, Heath WH, Scheidt KA, Torkelson JM. Tuning nanophase separation behavior in segmented polyhydroxyurethane via judicious choice of soft segment. POLYMER 2017. [DOI: 10.1016/j.polymer.2017.01.017] [Citation(s) in RCA: 37] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022]
|