Highly efficient and sustainable alginate/carboxylated lignin hybrid beads as adsorbent for cationic dye removal

A comprehensive review of sustainable hydrogels from lignin for advanced wastewater solutions

Throughout the recent years, water bodies have been significantly contaminated via various industrial and pollution wastes posing threats to the living. To tackle the situation, Lignin-Based Hydrogels have appeared as a material with great potential for wastewater treatment. Biomass-derived polymers for wastewater treatment present a sustainable replacement to plastics based on petroleum owing to its biocompatibility, affordability, eco-friendliness and biodegradability. After cellulose the lignin is the second highest polyaromatic bio-polymer in plants. And serves as the Earth's primary renewable source for aromatic materials. Structurally, it is a cross-linked polymer enriched with hydrophilic functional groups like hydroxyls, methoxyls, carbonyls that makes it a promising precursor towards hydrogel development. This review focuses on hydrogels based on lignin, highlighting their synthesis, traits and potential functions in water treatment. It also examines various methods for extracting lignin from different raw materials. Challenges and limitations associated with real-world applications of LBHs are addressed and along with prospects for future research. Ultimately, this review provides valuable insights into developing sustainable hydrogels based on lignin for efficient elimination of aquatic contaminants.

Synergy of Magnetic Nanoparticles and Sodium Alginate-Coated Lignin for Effective Pollutant Remediation, Simple Recovery, and Cost-Effective Regeneration

In the pursuit of sustainable materials for environmental remediation, this study presents the development and comprehensive characterization of cobalt ferrite nanoparticles (CFNPs) incorporated in lignocellulosic-derived sodium alginate (CFNPs@LCG-SA) biocomposite beads. These biobased beads exhibit exceptional adsorption capabilities, particularly for methylene blue (MB) dyes, rendering them promising candidates for wastewater treatment. Using a comprehensive range of analytical techniques, including Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis-derivative thermogravimetry (TGA/DTG), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), etc., we elucidated their structural, physicochemical, and thermal properties. Their multifunctional nature, derived from lignin and sodium alginate components, provides ample active sites for both physical interactions and chemical bonding with contaminants apart from the magnetic character attributed by the CFNPs. With a freeze-drying approach, the optimal adsorption capacity and removal rate of MB reached 97 mg/g and 99%, respectively, and no meaningful decline in their activity was noted even after six cycles. The CFNPs@LCG-SA biocomposite beads emerge as a cost-efficient and sustainable remedy for environmental cleanup, offering valuable perspectives in environmental preservation and advancing green energy technologies.

Biopolymer-based beads for the adsorptive removal of organic pollutants from wastewater: Current state and future perspectives

Among biopolymer-based adsorbents, composites in the form of beads have shown promising results in terms of high adsorption capacity and ease of separation from the effluents. This review addresses the potential of biopolymer-based beads to remediate wastewaters polluted with emerging organic contaminants, for instance dyes, active pharmaceutical ingredients, pesticides, phenols, oils, polyaromatic hydrocarbons, and polychlorinated biphenyls. High adsorption capacities up to 2541.76 mg g-1 for dyes, 392 mg g-1 for pesticides and phenols, 1890.3 mg g-1 for pharmaceuticals, and 537 g g-1 for oils and organic solvents have been reported. The review also attempted to convey to its readers the significance of wastewater treatment through adsorption by providing an overview on decontamination technologies of organic water contaminants. Various preparation methods of biopolymer-based gel beads and adsorption mechanisms involved in the process of decontamination have been summarized and analyzed. Therefore, we believe there is an urge to discuss the current state of the application of biopolymer-based gel beads for the adsorption of organic pollutants from wastewater and future perspectives in this regard since it is imperative to treat wastewater before releasing into freshwater bodies.

Facile crosslinking methods for water-durable oven-dried cellulose nanofibril foams and their application as dye adsorbents

The potential applications of cellulose nanofibril-based foam materials can be expanded by their enhanced water durability. This study proposes two crosslinking methods to improve the water durability of the oven-dried carboxymethylated cellulose nanofibril (CMCNF) foam. The first method involves the addition of a crosslinker, polyamideamine epichlorohydrin. The second method is the self-crosslinking of CMCNFs via heat treatment at 140 °C for less than an hour, which is a simple way to crosslink CMCNF-based materials. Both crosslinking methods resulted in excellent water durability and wet resilience of the foams, which also exhibited high water absorbency. Furthermore, neither method affected the structural nor mechanical properties of the oven-dried CMCNF foams. In particular, self-crosslinking by heat treatment proved to be as effective as using a crosslinking agent. Compared to the freeze-dried foam, the oven-dried foam exhibited slower methylene blue (MB) dye adsorption but a higher maximum adsorption capacity (238-250 mg/g), attributed to the closed pore structure and a larger specific surface area. In addition, the isotherm and reusability of the foam for MB adsorption were investigated. These crosslinking processes expanded the potential use of oven-dried CMCNF foams as adsorbents for cationic dyes.

Preparation of CS-LS/AgNPs Composites and Photocatalytic Degradation of Dyes

Synthetic dyes are prone to water pollution during use, jeopardizing biodiversity and human health. This study aimed to investigate the adsorption and photocatalytic assist potential of sodium lignosulfonate (LS) in in situ reduced silver nanoparticles (AgNPs) and chitosan (CS)-loaded silver nanoparticles (CS-LS/AgNPs) as adsorbents for Rhodamine B (RhB). The AgNPs were synthesized by doping LS on the surface of chitosan for modification. Fourier transform infrared (FT-IR) spectrometry, energy-dispersive spectroscopy (EDS), scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were used to confirm the synthesis of nanomaterials. The adsorption and photocatalytic removal experiments of RhB were carried out under optimal conditions (initial dye concentration of 20 mg/L, adsorbent dosage of 0.02 g, time of 60 min, and UV power of 250 W), and the kinetics of dye degradation was also investigated, which showed that the removal rate of RhB by AgNPs photocatalysis can reach 55%. The results indicated that LS was highly effective as a reducing agent for the large-scale production of metal nanoparticles and can be used for dye decolorization. This work provides a new catalyst for the effective removal of dye from wastewater, and can achieve high-value applications of chitosan and lignin.

Recent advances and future perspective on lignocellulose-based materials as adsorbents in diverse water treatment applications

The growing shortage of non-renewable resources and the burden of toxic pollutants in water have gradually become stumbling blocks in the path of sustainable human development. To this end, there has been great interest in finding renewable and environmentally friendly materials to promote environmental sustainability and combat harmful pollutants in wastewater. Of the many options, lignocellulose, as an abundant, biocompatible and renewable material, is the most attractive candidate for water remediation due to the unique physical and chemical properties of its constituents. Herein, we review the latest research advances in lignocellulose-based adsorbents, focusing on lignocellulosic composition, material modification, application of adsorbents. The modification and preparation methods of lignin, cellulose and hemicellulose and their applications in the treatment of diverse contaminated water are systematically and comprehensively presented. Also, the detailed description of the adsorption model, the adsorption mechanism and the adsorbent regeneration technique provides an excellent reference for understanding the underlying adsorption mechanism and the adsorbent recycling. Finally, the challenges and limitations of lignocellulosic adsorbents are evaluated from a practical application perspective, and future developments in the related field are discussed. In summary, this review offers rational insights to develop lignocellulose-based environmentally-friendly reactive materials for the removal of hazardous aquatic contaminants.

pH-sensitive cellulose/chitin nanofibrillar hydrogel for dye pollutant removal

In this study, a pH-sensitive smart hydrogel was successfully prepared by combining a polyelectrolyte complex using biopolymeric nanofibrils. By adding a green citric acid cross-linking agent to the formed chitin and cellulose-derived nanofibrillar polyelectrolytic complex, a hydrogel with excellent structural stability could be prepared even in a water environment, and all processes were conducted in an aqueous system. The prepared biopolymeric nanofibrillar hydrogel not only enables rapid conversion of swelling degree and surface charge according to pH but can also effectively remove ionic contaminants. The ionic dye removal capacity was 372.0 mg/g for anionic AO and 140.5 mg/g for cationic MB. The surface charge conversion ability according to pH could be easily applied to the desorption of the removed contaminants, and as a result, it showed an excellent contaminant removal efficiency of 95.1 % or more even in the repeated reuse process 5 times. Overall, the eco-friendly biopolymeric nanofibrillar pH-sensitive hydrogel shows potential for complex wastewater treatment and long-term use.

Fabrication of transparent cellulose nanofibril composite film with smooth surface and ultraviolet blocking ability using hydrophilic lignin

Ecofriendly multifunctional films with only biomass-based components have gathered significant interest from researchers as next-generation materials. Following this trend, a TEMPO-oxidized cellulose nanofibril (TOCNF) film containing hydrophilic lignin (CL) was fabricated. To produce the lignin, peracetic acid oxidation was carried out, leading to the introduction of carboxyl groups into the lignin structure. By adding hydrophilic lignin, various characteristics (e.g., surface smoothness, UV protection, antimicrobial activity, and barrier properties) of the TOCNF film were enhanced. In particular, the shrinkage of CNF was successfully prevented by the addition of CL, which is attributed to the lower surface roughness (Ra) from 18.93 nm to 4.99 nm. As a result, the smooth surface of the TOCNF/CL film was shown compared to neat TOCNF film and TOCNF/Kraft lignin composite film. In addition, the TOCNF/CL film showed a superior UV blocking ability of 99.9 % with high transparency of 78.4 %, which is higher than that of CNF-lignin composite films in other research. Also, water vapor transmission rate was reduced after adding CL to TOCNF film. Consequently, the developed TOCNF/CL film can be potentially utilized in various applications, such as food packaging.

Super-efficient removal and adsorption mechanism of anionic dyes from water by magnetic amino acid-functionalized diatomite/yttrium alginate hybrid beads as an eco-friendly composite

The development of eco-friendly, large-capacity and easy-to-separate adsorbent materials has always been the focus and difficulty of adsorption technology in wastewater treatment applications based on the characteristics of dye wastewater. Therefore, in this study, a green magnetic glycine(Gly)-functionalized diatomite(Dia)/yttrium alginate (Y-SA) hybrid bead composite (Dia-Gly-Y-SA@Fe₃O₄) was synthesized by the droplet polymerization, and characterized by various modern analytical techniques. The adsorption performance and adsorption mechanism of the composite were evaluated and elucidated by the removal of anionic dyes direct Blue 106 (DB 106), Congo red (CR) and direct red 13 (DR 13) from water. The results show that the composite is a macroparticle gelpolymer with an average particle size of about 1.5 mm, flower-like fold surface structure, abundant porosity and sensitive magnetic response, and displays ultrastrong adsorption ability for three dyes. The adsorption equilibrium of each dye can be reached quickly within 30 min, and the removal efficiency is more than 95% at pH 2.0 and decreases slightly with pH up to 9.0. The adsorption processes could be explained by the Pseudo-second-order rate equation well. All isotherm data fitted the Langmuir model well, and the maximum adsorption capacities were 1635, 2359 and 1165 mg/g for DB 106, CR and DR 13 at 298 K, respectively. The ultrastrong adsorption performance was due to the multisite interaction of physicochemical action and various hydrogen bonds between hybrid beads and dye anions. As a cost-effective magnetic macroparticle adsorbent prepared by natural ingredients, Dia-Gly-Y-SA@Fe₃O₄ composite exhibits much more stronger adsorption efficiency, better collectability and no secondary pollution than powder Dia, and would have a good application prospect for the purification of anionic dye wastewater with a wide pH range.

Lignin based microspheres for effective dyes removal: Design, synthesis and adsorption mechanism supported with theoretical study

Multifunctional lignin bio-based adsorbent, b-LMS, was obtained via inverse copolymerization in the suspension of acryloyl modified kraft lignin (K_fL-AA) and bio-based trimethylolpropane triacrylate (bio-TMPTA). Morphological and structural characterization of K_fL-AA and b-LMS was performed using BET, FTIR, Raman, NMR, TGA, SEM, and XPS techniques. The b-LMS microspheres with 253 ± 42 μm diameters, 69.4 m² g^-1 surface area, and 59% porosity efficiently adsorb Malachite Green (MG), Tartrazine (T), and Methyl Red (MR) dye. The influence of pH, pollutant concentration, temperature, and time on the removal efficiency was studied in a batch mode. Favorable and spontaneous processes with high adsorption capacities e.g. 116.8 mg g^-1 for MG, 86.8 mg g^-1 for T, and 68.6 mg g^-1 for MR indicate the significant adsorptive potential of b-LMS. Results from diffusional and single mass transfer resistance studies indicate that pore diffusion is a rate-limiting step. Theoretical calculations confirmed a higher affinity of b-LMS to cationic dye MG compared with an anionic and neutral one, i.e. T and MR, respectively. The data fitting from a flow system, using semi-empirical equations and Pore Surface Diffusion Modelling (PSDM) provided breakthrough point determination. The results from the desorption and competitive adsorption study proved the exceptional performance of b-LMS. Moreover, sulfation of b-LMS, i.e.production of b-LMS-OSO₃H, introduced high-affinity sulfate groups with respect to cationic dye and cations. Developed methodology implements the principle of sustainable development and offers concept whose results contribute to the minimization of environmental pollution.

Adsorptive removal of organic pollutant methylene blue using polysaccharide-based composite hydrogels

Methylene blue (MB) is categorized as an organic dye (OD) released as effluents after various industrial activities and is one of the most abundant pollutants in the aquatic environment. Significantly, because of its potential toxicity, removing MB from wastewater has been a matter of necessity in recent times. Numerous analytical techniques have been applied, among which polysaccharide-based composite hydrogels appear as the most favorable for MB removal because of their large surface area, excellent mechanical properties, swelling capability, and large-scale production. In this review, the first section gives adequate information about the ODs' adverse effects on the environment and the contribution of polysaccharide-based hydrogels for OD removal, especially MB. Next, various mechanisms such as electrostatic interactions, π-π interactions, hydrogen bonding, hydrophobic interaction, van der Waals force, and coordination interaction involved in the adsorption technique are investigated. The third section extensively describes the MB removal by incorporation of various materials such as monomers, metal oxides, magnetic nanoparticles, and clay into the polysaccharide matrix to produce composite hydrogels. Finally, the current limitations and future perspectives of the polysaccharide-based composite hydrogel techniques are addressed. Overall, this review acknowledged the vital role of polysaccharide-based composite hydrogels for MB adsorption by surveying 110 research articles published in the past five years (2015-2021).

Preparation of hyper-cross-linked hydroxylated polystyrene for adsorptive removal of methylene blue

A series of hydroxylated polystyrene (PS-OH) resins were prepared from macroporous poly(styrene-co-divinylbenzene) by nitration, reductive amination, diazotation and hydrolysis in sequence, and then a series of hyper-cross-linked hydroxylated polystyrene (HCPS-OH) resins were successfully prepared from the PS-OH resins by the Friedel–Crafts post-cross-linking using dichloromethane as an external cross-linker. Benefiting from the synthetic protocol, the HCPS-OH resins showed better adsorption performance for methylene blue in aqueous solution as compared with the corresponding PS-OH resins. HCPS-OH-4, one of the fabricated HCPS-OH resins which had the hydroxyl content of 5.0 mmol g⁻¹ and BET specific surface area of 69.0 m² g⁻¹, showed the highest adsorption capacity and selectivity for methylene blue. Higher temperature, higher pH, and higher ionic strength were beneficial to adsorption of methylene blue from aqueous solution. HCPS-OH-4 could be regenerated by treatment with 1.0 M HCl methanol solution and deionized water sequentially. Moreover, HCPS-OH-4 retained good adsorption performance for methylene blue even after 5 cycles of adsorption and regeneration, which implied that it was a good candidate for adsorptive removal of methylene blue dye in waste water.

This study presents the preparation of hyper-cross-linked hydroxylated polystyrene (HCPS-OH) resins using dichloromethane as an external cross-linker for the adsorption of methylene blue.

Synthesis of a Lignin-Fe/Mn Binary Oxide Blend Nanocomposite and Its Adsorption Capacity for Methylene Blue

A high-performance modified lignin adsorbent was prepared through coprecipitation of ferrous, ferric, and permanganate with lignin in sodium hydroxide solution. The structural characteristics of the synthesized lignin-Fe/Mn binary oxide blend nanocomposite (L-F/M) and its performance on the methylene blue (MB) removal from aqueous solution were evaluated. Influence factors of adsorption effects were analyzed including pH, contact time, dye concentration, temperature, and thermodynamics. The pseudo-second-order kinetic model well described the adsorption kinetics, and the adsorption isotherms best fitted the Langmuir model with a maximum adsorption capacity of 252.05 mg g-1 at 298 K. The adsorption mechanism showed that the L-F/M introduced the metallic element and negative charges to the lignin surface, which improved the adherence of MB via hydrogen bonding, electrostatic interaction, and coordination. Moreover, the removal ratio of MB maintained 81.2% after being used in five adsorption-desorption cycles. Results indicated that the L-F/M obtained was an efficient candidate for dye wastewater treatment.