Environmentally-benign rigid polyurethane foam produced from a reactive and phosphorus-functionalized biopolyol: Assessment of physicomechanical and flame-retardant properties

Elaboration of Thermally Performing Polyurethane Foams, Based on Biopolyols, with Thermal Insulating Applications

In this work, biobased rigid polyurethane foams (PUFs) were developed with the aim of achieving thermal and fireproofing properties that can compete with those of the commercially available products. First, the synthesis of a biopolyol from a wood residue by means of a scaled-up process with suitable yield and reaction conditions was carried out. This biopolyol was able to substitute completely the synthetic polyols that are typically employed within a polyurethane formulation. Different formulations were developed to assess the effect of two flame retardants, namely, polyhedral oligomeric silsesquioxane (POSS) and amino polyphosphate (APP), in terms of their thermal properties and degradation and their fireproofing mechanism. The structure and the thermal degradation of the different formulations was evaluated via Fourier Transformed Infrared Spectroscopy (FTIR) and thermogravimetric analysis (TGA). Likewise, the performance of the different PUF formulations was studied and compared to that of an industrial PUF. From these results, it can be highlighted that the addition of the flame retardants into the formulation showed an improvement in the results of the UL-94 vertical burning test and the LOI. Moreover, the fireproofing performance of the biobased formulations was comparable to that of the industrial one. In addition to that, it can be remarked that the biobased formulations displayed an excellent performance as thermal insulators (0.02371-0.02149 W·m-1·K-1), which was even slightly higher than that of the industrial one.

Phytic Acid-Iron/Laponite Coatings for Enhanced Flame Retardancy, Antidripping and Mechanical Properties of Flexible Polyurethane Foam

The use of flexible polyurethane foam (FPUF) is severely limited due to its flammability and dripping, which can easily cause major fire hazards. Therefore, choosing an appropriate flame retardant to solve this problem is an urgent need. A coating was prepared on the FPUF surface by dipping with phytic acid (PA), Fe2(SO4)3·xH2O, and laponite (LAP). The influence of PA-Fe/LAP coating on FPUF flame-retardant performance was explored by thermal stability, flame retardancy, combustion behavior, and smoke density analysis. FPUF/PA-Fe/LAP has a good performance in the small fire test, which can pass the UL-94 V-0 rating and the limiting oxygen index reaches 24.5%. Meanwhile, the peak heat release rate values and maximum smoke density of FPUF/PA-Fe/LAP are reduced by 38.7% and 38.5% compared with those of neat FPUF. After applying PA-Fe/LAP coating, the value of fire growth rate index decreases from 10.5 kW/(m2·s) to 5.1 kW/(m2·s), dramatically reducing the fire risk. Encouragingly, the effect of PA-Fe/LAP coating on cyclic compression and permanent deformation is small, which is close to that of neat FPUF. This work provides an effective strategy for making a flame-retardant FPUF with antidripping and keeping mechanical properties.