Spectrophotometric determination of hydrogen peroxide with osmium(VIII) and m-carboxyphenylfluorone

Photocatalytic degradation of methyl blue dye with H2O2 sensing

A condensation polymer (urea-formaldehyde resin) passivated ZnO nanoparticles were used as an efficient photocatalyst for methyl blue degradation in the presence of H2O2 involving a Fenton-like reaction. The formation of OH˙ radicals were attributed to the pivotal factor for the degradation process. The method was easy and recyclable. The dose of photocatalyst, initial dye concentration, pH variation, variations of the composition of the photocatalyst, and the effect of scavengers were gauged. The degraded product was highly fluorescent and fluorometric detection of H2O2 was achieved along with a colorimetric recognition pathway. No other dye could be degraded under similar experimental conditions, implying the novel utility of methyl blue for environmental remediation.

A simple spectrophotometric determination of hydrogen peroxide solution via spectral delta from redox reaction with sodium hypochlorite

Hydrogen peroxide (H₂O₂) is widely used in the synthesis of organic chemicals, bleaching of paper pulp, and the treatment of wastewater and as a food additive, important mediator of redox processes in natural water, and a disinfectant. However, H₂O₂ stock solution is unstable and slowly decomposes when exposed to, for example, light, elevated temperatures, or metal compounds. Therefore, the ability to measure the exact concentration of H₂O₂ stock solution is important for its proper use in diverse applications. This work proposes a simple method for the spectrophotometric determination of H₂O₂ solution via chemical reaction with sodium hypochlorite that is inexpensive and easy to acquire. The proposed method is based on the stoichiometric spectral change of hypochlorite ion at 292.5 nm following a redox reaction with a sample solution of H₂O₂. Due to high relationship between the spectral delta value and the applied H₂O₂ concentration (0.00188-0.03000%), H₂O₂ stock solution can be easily quantified.

Novel Electrochemical Sensors Based on L-Proline Assisted LDH for H2O2 Determination in Healthy and Diabetic Urine

In this paper, a novel non-enzymatic modified glassy carbon (GC) sensor, of the (GC-Ag_paste)-catalytic proline-assisted LDH type, for H₂O₂ determination was fabricated, studied, characterized and employed to determine the hydrogen peroxide content in healthy and diabetic human urine. LDH (whose composition can be schematized as [Zn^IIAl^III (OH)₂]⁺ NO₃^-·nH₂O) is glued to glassy carbon by means of silver paste, while proline, which increases the catalytic properties of LDH, is used free in solution in the phosphate buffer. A voltametric survey was first conducted to ascertain the positive effect induced by the presence of proline, i.e., the increase of sensor sensitivity. Then a deep study of the new three-electrode amperometric proline-assisted LDH sensor, whose working electrode was of the same type as the one used to perform the cyclic voltammetry, was carried out, working at first in static air, then in a nitrogen atmosphere. Possible interferences from various substances, both oxidants and antioxidants, were also investigated. Lastly, the new amperometric sensor was successfully used to determine the H₂O₂ level in human urine from both healthy and diabetic subjects. The effect of proline in enhancing the properties of the sensor system was also investigated. The limit of detection (LOD) of the new catalytic sensor was of the order of 0.15 mmol L^-1, working in air, and of 0.05 µmol L^-1, working in nitrogen atmosphere.

A Core–Shell Au@TiO2 and Multi-Walled Carbon Nanotube-Based Sensor for the Electroanalytical Determination of H2O2 in Human Blood Serum and Saliva

A hydrogen peroxide (H₂O₂) sensor was developed based on core–shell gold@titanium dioxide nanoparticles and multi-walled carbon nanotubes modified glassy carbon electrode (Au@TiO₂/MWCNTs/GCE). Core–shell Au@TiO₂ material was prepared and characterized using a scanning electron microscopy and energy dispersive X-ray analysis (SEM/EDX), transmission electron microscopy (TEM), atomic force microscopy (AFM), Raman spectroscopy, X-ray diffraction (XRD) and Zeta-potential analyzer. The proposed sensor (Au@TiO₂/MWCNTs/GCE) was investigated electrochemically using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The analytical performance of the sensor was evaluated towards H₂O₂ using differential pulse voltammetry (DPV). The proposed sensor exhibited excellent stability and sensitivity with a linear concentration range from 5 to 200 µM (R² = 0.9973) and 200 to 6000 µM (R² = 0.9994), and a limit of detection (LOD) of 1.4 µM achieved under physiological pH conditions. The practicality of the proposed sensor was further tested by measuring H₂O₂ in human serum and saliva samples. The observed response and recovery results demonstrate its potential for real-world H₂O₂ monitoring. Additionally, the proposed sensor and detection strategy can offer potential prospects in electrochemical sensors development, indicative oxidative stress monitoring, clinical diagnostics, general cancer biomarker measurements, paper bleaching, etc.

Sensitive determination of hydrogen peroxide in real water samples by high spin peroxo complex

In this paper, a fast, cheap, simple, sensitive and selective spectrophotometric method based on high spin peroxo-Fe(III)-EDTA complex in the alkaline medium was developed for the determination of hydrogen peroxide (H₂O₂) in real water samples. The purple-coloured complex with a maximum absorbance at a wavelength of 525 nm was formed. Various parameters such as type of stabilizer reagent and its concentration, reaction time, Fe(III), EDTA and NH₃ concentration were optimized. The method was confirmed with the Beer’s law with a molar absorption coefficient of 267.36 L mol^-1 cm^-1 in the 8.3 ×10^-6 –4.08 ×10^-3 mol/L concentration range. Sandell’s sensitivity of the proposed method was also calculated as 0.188 μg/cm² . LOD and LOQ were determined as 2.5 ×10^-6 and 8.3 ×10^-6 mol/L, respectively. Intraday and interday relative standard deviation of the proposed method for 2.0 ×10^-4 mol / L of H₂O₂ were found as 1.5% and 6.1%, respectively. The developed method is suitable for fast monitoring of H₂O₂ in different types of aqueous water samples without any sample preparation steps and acceptable recovery values between 90% and 118% were obtained. In the sample analysis, H₂O₂ removed solutions from the real water samples were used for blank correction in their analysis and this process provides more reliable and accurate results in real sample analysis.

Electrochemical Detection of H2O2 Released from Prostate Cancer Cells Using Pt Nanoparticle-Decorated rGO–CNT Nanocomposite-Modified Screen-Printed Carbon Electrodes

In this study, we fabricated platinum nanoparticles (PtNP)-decorated, porous reduced graphene oxide (rGO)–carbon nanotube (CNT) nanocomposites on a PtNP-deposited screen-printed carbon electrode (PtNP/rGO–CNT/PtNP/SPCE) for detection of hydrogen peroxide (H2O2), which is released from prostate cancer cells LNCaP. The PtNP/rGO–CNT/PtNP/SPCE was fabricated by a simple electrochemical deposition and co-reduction method. In addition, the amperometric response of the PtNP/rGO–CNT/PtNP/SPCE electrode was evaluated through consecutive additions of H2O2 at an applied potential of 0.2 V (vs. Ag pseudo-reference electrode). As a result, the prepared PtNP/rGO–CNT/PtNP/SPCE showed good electrocatalytic activity toward H2O2 compared to bare SPCE, rGO–CNT/SPCE, PtNP/SPCE, and rGO–CNT/PtNP/SPCE. In addition, the PtNP/rGO–CNT/PtNP/SPCE electrode exhibited a sensitivity of 206 μA mM−1·cm−2 to H2O2 in a linear range of 25 to 1000 μM (R2 = 0.99). Moreover, the PtNP/rGO–CNT/PtNP/SPCE electrode was less sensitive to common interfering substances, such as ascorbic acid, uric acid, and glucose than H2O2. Finally, real-time monitoring of H2O2 released from LNCaP cells was successfully performed by this electrode. Therefore, we expect that the PtNP/rGO–CNT/PtNP/SPCE can be utilized as a promising electrochemical sensor for practical nonenzymatic detection of H2O2 in live cells or clinical analysis.

Development of an ultrasound-enhanced smartphone colorimetric biosensor for ultrasensitive hydrogen peroxide detection and its applications

In this work, we developed the first ultrasound technique enhanced smartphone application for highly sensitive determination of hydrogen peroxide (H₂O₂). The measurement technique is based on the change in color intensity due to the transformation of tetramethylbenzidine (TMB) to oxidized tetramethylbenzidine (oxTMB) by the oxidation process with hydroxyl radical (OH˙) from the oxidation etching of silver nanoparticles (AgNPs) and its ultrasound usability. The oxTMB product occurs without peroxidase and can be detected with a saturation channel using HSV methodology via the application of a smartphone. To prove the peroxidase mimic property, our proposed method was also validated by determination of certain biomolecules, including glucose, uric acid, acetylcholine and total cholesterol, of which the known amounts are a valuable diagnostic tool. The proposed method provided the lowest limits of detection (LOD) of 2.0, 5.0, 12.50, 7.50, and 10.0 nmol L⁻¹ for H₂O₂, glucose, uric acid, acetylcholine, and cholesterol, respectively, when compared with LODs obtained from other smartphone colorimetric methods. Reproducibility was calculated from the detection of H₂O₂ at 25.0 and 50.0 nmol L⁻¹ with the highest standard deviations of 3.47 and 4.58%, respectively. Additionally, the determination of all analytes in human urine samples indicated recoveries in the range of 96–104% with the highest relative standard deviation of 3.98%, offering high accuracy and precision. Our research shows the novel compatibility of basic technology and chemical methodology with green chemistry principles by reducing a high-power process and organic solvent as well as exhibiting good colorimetric performance and effective sensitivity and selectivity. Thus, our developed method can be applied for point-of-care medical diagnosis.

In this work, we developed the first ultrasound technique enhanced smartphone application for highly sensitive determination of hydrogen peroxide (H₂O₂).

Spectrophotometric determination of hydrogen peroxide in water by oxidative decolorization of azo dyes using Fenton system

In this study, based on the oxidative decolorization of three azo dyes (Orange G (OG), Acid Orange 7 (AO7) and Reactive Black 5 (RB5)) with hydroxyl radicals generated in Fenton system, we have successfully established three types of azo dyes spectrophotometric methods for measuring aqueous hydrogen peroxide (H₂O₂) concentration. The decolorization extent of OG, AO7 and RB5 at the corresponding characteristic wavelengths of 478 nm, 484 nm and 597 nm are proportion to the concentration of H₂O₂ in aqueous solutions. Under the selected reaction conditions, three well linear correlations between the depletion of azo dyes and the H₂O₂ concentration are established in the range of 0.45-175 μmol L^-1 of OG, 0.36-120 μmol L^-1 of AO7 and 0.44-175 μmol L^-1 of RB5, respectively. These proposed spectrophotometric methods are enough accurate to measure low concentrations of H₂O₂ in practical water samples and monitor the variations of H₂O₂ concentration during the phenol degradation in the Cu(II)/HCO₃^-/H₂O₂ process.

Multi-wavelength spectrophotometric determination of hydrogen peroxide in water by oxidative coloration of ABTS via Fenton reaction

In this study, a sensitive and low-cost multi-wavelength spectrophotometric method for the determination of hydrogen peroxide (H₂O₂) in water was established. The method was based on the oxidative coloration of 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) via Fenton reaction, which resulted in the formation of green radical (ABTS^•+) with absorbance at four different wavelengths (i.e., 415 nm, 650 nm, 732 nm, and 820 nm). Under the optimized conditions (C_ABTS = 2.0 mM, C_Fe²⁺ = 1.0 mM, pH = 2.60 ± 0.02, and reaction time (t) = 1 min), the absorbance of the generated ABTS^•+ at 415 nm, 650 nm, 732 nm, and 820 nm were well linear with H₂O₂ concentrations in the range of 0-40 μM (R² > 0.999) and the sensitivities of the proposed Fenton-ABTS method were calculated as 4.19 × 10⁴ M^-1 cm^-1,1.73 × 10⁴ M^-1 cm^-1, 2.18 × 10⁴ M^-1 cm^-1, and 1.96 × 10⁴ M^-1 cm^-1, respectively. Meanwhile, the detection limits of the Fenton-ABTS method at 415 nm, 650 nm, 732 nm, and 820 nm were respectively calculated to be 0.18 μM, 0.12 μM, 0.10 μM, and 0.11 μM. The absorbance of the generated ABTS^•+ in ultrapure water, underground water, and reservoir water was quite stable within 30 min. Moreover, the proposed Fenton-ABTS method could be used for monitoring the variations of H₂O₂ concentration during the oxidative decolorization of RhB in alkali-activated H₂O₂ system.

Spectrophotometric determination of trace hydrogen peroxide via the oxidative coloration of DPD using a Fenton system

A low-cost and environmentally-friendly spectrophotometric method for hydrogen peroxide (H₂O₂) determination based on the oxidative coloration reaction of N,N'-diethyl-p-phenylenediamine (DPD) via the Fenton reactions in aqueous water was established. The generated pink radical cation (DPD⁺) showed maximum absorption at 551 nm. Importantly, under the optimal conditions (pH 3.0, 20 mM DPD, 1.5 mM Fe(II) and reaction time of 45 s), the increase in absorbance at 551 nm for DPD⁺ generation was linear with respect to the addition of H₂O₂ (0-12 μM). The sensitivity and the detection limit of the proposed Fenton-DPD method for H₂O₂ determination at 551 nm were (2.55 ± 0.01) × 10⁴ M^-1 cm^-1 and 0.05 μM, respectively. The stoichiometric factor for the reaction of H₂O₂ with DPD was 1:1.18. The absorbance of the generated DPD⁺ was found to be stable in different types of water within 20 min. Moreover, the proposed Fenton-DPD method could be used for the analysis of the trace H₂O₂ in rainwater and determine the rate constants that involved H₂O₂ with high accuracy.

Multi-wavelength spectrophotometric determination of hydrogen peroxide in water with peroxidase-catalyzed oxidation of ABTS

In this study, a new spectrophotometric method was proposed for the measurement of hydrogen peroxide (H₂O₂) in aqueous solutions. The method was based on the peroxidase (POD)-catalyzed reaction in which 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) was oxidized to form the stable green radical (ABTS⁺). The generated ABTS⁺ could be determined spectrophotometrically. The absorbance of the generated ABTS⁺ at 415 nm, 650 nm, 732 nm and 820 nm were linear with H₂O₂ concentrations in the range of 0-40 μM. The sensitivities of the proposed ABTS method for H₂O₂ determination at 415 nm, 650 nm, 732 nm and 820 nm were 6.29 × 10⁴ M^-1 cm^-1, 2.00 × 10⁴ M^-1 cm^-1, 2.54 × 10⁴ M^-1 cm^-1 and 1.89 × 10⁴ M^-1 cm^-1, respectively. The oxidation of ABTS to generate ABTS⁺ in POD-catalyzed H₂O₂ system at pH 6.0 was so fast that the determination time of the ABTS method was as short as 0.5 min. The stoichiometry of the reaction of H₂O₂ and ABTS in the presence of POD was calculated as nearly 1:2 (1:1.92). The residual absorbance of the generated ABTS⁺ was also found to be stable within 30 min in natural waters. Low H₂O₂ concentration in rainwater could be both measured by the ABTS method and the DPD method with high accuracy, however, H₂O₂ concentration in wastewater contained rhodamine B could only be accurately measured with the ABTS method at 732 nm. Moreover, waste solutions after H₂O₂ analysis with the proposed ABTS method were non-hazardous towards E. coli.

Ultra-Sensitive Nano Optical Sensor Samarium-Doxycycline Doped in Sol Gel Matrix for Assessment of Glucose Oxidase Activity in Diabetics Disease

A low cost and very sensitive method for the determination of the activity of glucose oxidase enzyme in different diabetics serum samples was developed. The method based on the assessment of the H₂O₂ concentration produced from the reaction of the glucose oxidase (GOx) enzyme with glucose as substrate in the serum of diabetics patients by nano optical sensor Sm-doxycycline doped in sol gel matrix. H₂O₂ enhances the luminescence intensity of all bands of the nano Sm-doxycycline complex [Sm-(DC)₂]⁺ doped in sol-gel matrix, especially the 645 nm band at λ_ex = 400 nm and pH 7.0 in water. The influence of the different analytical parameters that affect the luminescence intensity of the nano optical sensor, e.g. pH, H₂O₂ concentration and foreign ions concentrations were studied. The remarkable enhancement of the luminescence intensity of nano optical sensor [Sm-(DC)₂]⁺ complex in water at 645 nm by the addition of various concentrations of H₂O₂ was successfully used as an optical sensor for the assessment of the activity of the glucose oxidase enzyme in different diabetics serum samples. The calibration plot was achieved over the activity range 0.1-240 U/L with a correlation coefficient of 0.999 and a detection limit of 0.05 U/L.

Study of the transient "free" OH radical generated in H2O-H2O2 mixtures by stimulated Raman scattering

Forward and backward stimulated Raman scattering (SRS) were studied in the H₂O₂-H₂O mixtures by a strong excitation laser with 532nm. Only the backward SRS (BSRS) of the H₂O₂-H₂O system shows an unexpected SRS shoulder peak at around 3600cm^-1, which is similar to the characteristic peak of "free" OH radical. The generation of the "free" OH radical is mainly attributed to the dissociation of hydrogen peroxide (HP) molecules. Simultaneously, the ionization of HP-water clusters generates a part of "free" OH radical under the Laser-induced breakdown (LIB). The interaction of water and HP is also discussed.

Development of a reliable analytical method for the precise extractive spectrophotometric determination of osmium(VIII) with 2-nitrobenzaldehydethiocarbohydrazone: Analysis of alloys and real sample

The proposed method demonstrates that the osmium(VIII) forms complex with 2-NBATCH from 0.8molL(-1) HCl at room temperature. The complex formed was extracted in 10mL of chloroform with a 5min equilibration time. The absorbance of the red colored complex was measured at 440nm against the reagent blank. The Beer's law was obeyed in the range of 5-25μgmL(-1), the optimum concentration range was 10-20μgmL(-1) of osmium(VIII) as evaluated by Ringbom's plot. Molar absorptivity and Sandell's sensitivity of osmium(VIII)-2NBATCH complex in chloroform is 8.94×10(3)Lmol(-1)cm(-1) and 0.021μgcm(-2), respectively. The composition of osmium(VIII)-2NBATCH complex was 1:2 investigated from Job's method of continuous variation, Mole ratio method and slope ratio method. The interference of diverse ions was studied and masking agents were used wherever necessary. The present method was successfully applied for determination of osmium(VIII) from binary, ternary and synthetic mixtures corresponding to alloys and real samples. The validity of the method was confirmed by finding the relative standard deviation for five determinations which was 0.29%.

Poly (N-isopropylacrylamide)-co-(acrylic acid) microgel/Ag nanoparticle hybrids for the colorimetric sensing of H2O2

Poly (N-isopropylacrylamide)-co-(acrylic acid) (pNIPAm-co-AAc) microgels composed of Ag nanoparticles (Ag NPs) have been synthesized and employed for the colorimetric sensing of H2O2. Each pNIPAm-co-AAc microgel, which exhibited a diameter of ∼800 nm, contained multiple Ag NPs (diameter of ∼5 nm), and solutions of these hybrid materials showed a UV-vis absorption band at ∼400 nm. This is due to the excitation of the Ag NP surface plasmon. We go on to show that the intensity of this absorption band is dependent on the concentration of H2O2 in solution. Specifically, in the presence of H2O2 the magnitude of the absorption peak dramatically decreases in a linear fashion over the concentration range of 0.30 to 3.00 μM H2O2 (r(2) = 0.9918). We go on to show that the response is selective for H2O2 and can still function in complex mixtures, e.g., we showed that the response is still robust in milk samples. While Ag NPs themselves can exhibit similar responses, this system has many benefits including sample processing and long term stability - i.e., Ag NPs are destabilized in solutions of a certain pH, and aggregate readily. Our microgel/Ag NP hybrids have been shown to be extremely stable and are easily purified prior to use by simple centrifugation/washing protocols. This system is simple and straightforward to use, is low cost, and can be used in complex media, which makes it practical for analyzing complex biological and environmental samples.

Synthesis and anisotropic self-assembly of Ag nanoparticles immobilized by the Pluronic F127 triblock copolymer for colorimetric detection of H2O2

Facile and green synthesis of a Ag@DA@F127 system for the sensitive and quantitative detection of H₂O₂. Ag NPs in the network-like F127 micelles were well-dispersed and anisotropically self-assembled.

Development of a novel and efficient H2O2 sensor by simple modification of a screen printed Au electrode with Ru nanoparticle loaded functionalized mesoporous SBA15

A novel and efficient electrochemical sensor has been developed to quantitatively measure H₂O₂ concentration by cyclic voltammetry.