Spectroscopic and DFT study of solvent effects on the electronic absorption spectra of sulfamethoxazole in neat and binary solvent mixtures

Mesocosm experiment to determine the contribution of adsorption, biodegradation, hydrolysis and photodegradation in the attenuation of antibiotics at the water sediment interface

To understand the fate of antibiotics in the aquatic environment, we need to evaluate to which extent the following processes contribute to the overall antibiotic attenuation: adsorption to river sediment, biodegradation, hydrolysis and photodegradation. A laboratory scale mesocosm experiment was conducted in 10 L reactors filled with river sediment and water. The reactors were spiked with four classes of antibiotics (fluoroquinolones, macrolides, sulfonamides, tetracyclines), as well as clindamycin and trimethoprim. The experimental-set-up was designed to study the attenuation processes in parallel in one mesocosm experiment, hence also considering synergetic effects. Our results showed that antibiotics belonging to the same class exhibited similar behavior. Adsorption was the main attenuation process for the fluoroquinolones and tetracyclines (44.4 to 80.0 %). For the sulfonamides, biodegradation was the most frequent process (50.2 to 65.1 %). Hydrolysis appeared to be significant only for tetracyclines (12.6 to 41.8 %). Photodegradation through visible light played a minor role for most of the antibiotics - fluoroquinolones, sulfonamides, and trimethoprim (0.7 to 24.7 %). The macrolides were the only class of antibiotics not affected by the studied processes and they persisted in the water phase. Based on our results, we propose to class the antibiotics in three groups according to their persistence in the water phase. Fluoroquinolones and tetracyclines were non-persistent (half-lives shorter than 11 d). Chlorotetracycline, sulfapyridine and trimethoprim showed a moderate persistence (half-lives between 12 and 35 d). Due to half-lives longer than 36 d sulfonamides and clindamycin were classified as persistent.

Effect of Hydroxyl Group on Photo-Physical Properties and Dipole Moments of Fluorescent Dyes: An Experimental and Computational Approach

In this work, structurally similar, (E)-N'-(2-hydroxybenzylidene)-3,5-di-tert-butyl-2-hydroxybenzohydrazide (A) and (E)-N'-(2-4-dihydroxybenzylidene)-3,5-di-tert-butyl-2-hydroxybenzohydrazide (A-OH) dyes dissolved in general solvents have been studied to explore photo-physical properties, employing solvatochromic shift method, thereby determining their dipole moments in the ground (μ_g) and excited (μ_e) states. The molecule A shows a bathochromic shift of fluorescence emission maxima in aprotic solvents whereas a hypsochromic shift in protic solvents. Interestingly, A-OH follows a hypsochromic shift in both protic and aprotic solvents with increasing solvent polarity. The effect of hydroxyl substituent on UV-Visible absorption, fluorescence emission, and dipole moment of the titled organic molecules was explained. Theoretical methods such as Bilot-Kawski method for determination of μ_g and μ_e and Bakshiev, Kawski-Chamma-Viallet, Lippert-Mataga equations for μ_e, and Reichardt method for the difference between μ_g and μ_e were employed. It is observed that μ_e is higher than that of μ_g for both the molecules, and interestingly, upon substituting an additional hydroxyl group the value of μ_g has increased while μ_e is decreased. The DFT calculations have been performed to support experimental results by employing DFT/B3LYP/6-311G + (d) and TD-DFT/B3LYP/6-311G + (d) method using Gaussian09 software. The electrophilic and nucleophilic sites on the molecules were studied with the help of MEP. The NBO analysis results show that the interaction N24 (σ) → C22-O23 (π*) is found to be stronger in both the molecules with energy 68.90 kJ/mol and the effect of hydroxyl group is also discussed on the basis of HOMO and LUMO.

Efficient model photosensitizers based on metallocenyl complexes with thiophene-N = N-pyrimidine as π-conjugated bridge and cyanoacrylate as an anchoring group: a density functional theory study

Eight push-pull systems involving containing four transition metals (iron, ruthenium, cobalt, and nickel), metallocenes as donor groups, cyanoacrylate as electron attractor group, and thiophene-N = N- pyrimidine derivatives as π-conjugated bridges were designed and studied using DFT and TD-DFT methods involving B3LYP and CAM-B3LYP functionals combined with the cc-pVDZ/LANL2DZ basis sets. The main purpose of this work is to determine the effect of metallocene in improving the photosensitization property of such chromophores. This was done by calculating their light-harvesting efficiency LHE as well as other properties employed for DSSC application. The considered dyes were first studied in the gas phase, then in the presence of TiO₂ nanoparticles representing the semi-conductor, and finally in the presence of a specific implicit solvent. The presence of iron as metal involved in the metallocene group supplemented by extending the π-conjugated bridge by a cyanovinyl spacer was demonstrated so as to give the most optimal response taking into account the lower cost and toxicity as well as the friendliness to the environment of iron as metal.

Absorption spectra of benzoic acid in water at different pH and in the presence of salts: insights from the integration of experimental data and theoretical cluster models

The absorption spectra of molecular organic chromophores in aqueous media are of considerable importance in environmental chemistry. In this work, the UV-vis spectra of benzoic acid (BA), the simplest aromatic carboxylic acid, in aqueous solutions at varying pH and in the presence of salts are measured experimentally. The solutions of different pH provide insights into the contributions from both the non-dissociated acid molecule and the deprotonated anionic species. The microscopic interpretation of these spectra is then provided by quantum chemical calculations for small cluster models of benzoic species (benzoic acid and benzoate anion) with water molecules. Calculations of the UV-vis absorbance spectra are then carried out for different clusters such as C6H5COOH·(H2O)n and C6H5COO-·(H2O)n, where n = 0-8. The following main conclusions from these calculations and the comparison to experimental results can be made: (i) the small water cluster yields good quantitative agreement with observed solution experiments; (ii) the main peak position is found to be very similar at different levels of theory and is in excellent agreement with the experimental value, however, a weaker feature about 1 eV to lower energy (red shift) of the main peak is correctly reproduced only by using high level of theory, such as Algebraic Diagrammatic Construction (ADC); (iii) dissociation of the BA into ions is found to occur with a minimum of water molecules of n = 8; (iv) the deprotonation of BA has an influence on the computed spectrum and the energetics of the lowest energy electronic transitions; (v) the effect of the water on the spectra is much larger for the deprotonated species than for the non-dissociated acid. It was found that to reproduce experimental spectrum at pH 8.0, additional continuum representation for the extended solvent environment must be included in combination with explicit solvent molecules (n ≥ 3); (vi) salts (NaCl and CaCl2) have minimal effect on the absorption spectrum and; (vii) experimental results showed that B-band of neutral BA is not sensitive to the solvent effects whereas the effect of the water on the C-band is significant. The water effects blue-shift this band up to ∼0.2 eV. Overall, the results demonstrate the ability to further our understanding of the microscopic interpretation of the electronic structure and absorption spectra of BA in aqueous media through calculations restricted to small cluster models.

Solubility and Preferential Solvation of Piroxicam in Neat Solvents and Binary Systems

The solubilization and solvatochromic behavior of piroxicam (PRX) were analyzed using UV-vis spectroscopy in neat (protic and aprotic) and binary solvent mixtures. The effects of solvent dipolarity/polarizability and solvent–solute hydrogen bonding interactions on the absorption maxima were evaluated by means of the linear solvation energy relationship concept of Kamlet and Taft. This analysis indicated that both interactions play an important role in the position of the absorption maxima in neat solvents. While, the PRX solubility depends on the solute–solvent specific interactions, polarizability and the cohesive forces of the solvent, manifested mainly by means of the Hildebrand’s solubility parameter. Preferential solvation (PS) was studied in 10 binary mixtures. A non-ideal behavior of the wavenumber curve as the function of analytical mole fraction of co-solvent was detected. Index of preferential solvation, as well as the influence of solvent parameters were calculated. The process of dissolution was analyzed in aqueous binary mixtures of ethanol, ethylene glycol and propylene glycol. They were not spontaneous in all proportions, but when water concentration decreases in the mixtures, the process becomes more spontaneous.

High Adsorption of Sulfamethoxazole by an Amine-Modified Polystyrene-Divinylbenzene Resin and Its Mechanistic Insight

Sulfamethoxazole (SMZ) adsorption by a series of amine-modified polystyrene-divinylbenzene resins (PSA/B/C/D) was investigated. All resins showed a similar pH dependent adsorption of SMZ but their capacities were linearly related with the contents of primary amines (-NH2) rather than secondary amines (-NH-). Mechanisms of SMZ adsorption by PSA (highest -NH2 content) were discussed as an example. Due to comparable pKa, H-bonding interactions of -NH2(0) with SMZ(0) (regular H-bond) and SMZ(-) (negative charge-assisted H-bond, (-)CAHB) successively contributed most adsorption (pH 4-9). At weakly acidic pH, -NH2(0) was partially protonated and electrostatic attraction between -NH3(+) and SMZ(-) occurred concurrently, but could be hindered by increased loading of SMZ(0). Hydrophobic/ π-π interactions were not major mechanisms as phenanthrene and nitrobenzenes had little effect on SMZ adsorption. At alkaline pH, where SMZ(-) and -NH2(0) prevailed, adsorption was accompanied by the stoichiometric (∼1.0) proton exchange with water, leading to OH(-) release and the formation of (-)CAHB [SO2N(-)···H···NH2]. The interaction and SMZ spatial distribution in the resin-phase were further confirmed by FTIR and Raman spectra. SMZ was uniformly adsorbed on external and interior surfaces. SMZ adsorption by PSA had low-interference from other coexistent matter, but high stability after multiple regenerations. The findings will guide new adsorbent designs for selectively removing target organics.

Solid-State Characterization and Interconversion of Recrystallized Amodiaquine Dihydrochloride in Aliphatic Monohydric Alcohols

Amodiaquine dihydrochloride monohydrate (AQ-DM) was obtained by recrystallizing amodiaquine dihydrochloride dihydrate (AQ-DD) in methanol, ethanol, and n-propanol. Solid-state characterization of AQ-DD and AQ-DM was performed using X-ray powder diffractometry, Fourier transform infrared spectroscopy, thermogravimetry, and differential scanning calorimetry. All recrystallized samples were identified as AQ-DM. Crystal habits of AQ-DD and AQ-DM were shown to be needle-like and rhombohedral crystals, respectively. When AQ-DD and AQ-DM were exposed to various relative humidity in dynamic vapor sorption apparatus, no solid-state interconversion was observed. However, AQ-DM showed higher solubility than AQ-DD when exposed to bulk water during solubility study, while excess AQ-DM was directly transformed back to a more stable AQ-DD structure. Heating AQ-DM sample to temperatures ≥190°C induced initial change to metastable amorphous form (AQ-DA) which was rapidly recrystallized to AQ-DD upon ≥80%RH moisture exposure. AQ-DD was able to be recrystallized in alcohols (C1-C3) as AQ-DM solid-state structure. In summary, AQ-DM was shown to have different solubility, moisture and temperature stability, and interconversion pathways when compared to AQ-DD. Thus, when AQ-DM was selected for any pharmaceutical applications, these critical transformation and property differences should be observed and closely monitored.

The crystal structure of sulfamethoxazole, interaction with DNA, DFT calculation, and molecular docking studies

Sulfamethoxazole (SMX) [4-amino-N-(5-methyl-1,2-oxazol-3-yl)benzenesulfonamide] is structurally established by single crystal X-ray diffraction measurement. The crystal packing shows H-bonded 2D polymer through N(7)-H(7A)-O(2), N(7)-H(7B)-O(3), N(1)-H(1)-N(2), C(5)-H(5)-O(3)-S(1) and N(7)-(H7A)-O(2)-S(1). Density Functional Theory (DFT) and Time Dependent-DFT (TD-DFT) computations of optimized structure of SMX determine the electronic structure and has explained the electronic spectral transitions. The interaction of SMX with CT-DNA has been studied by absorption spectroscopy and the binding constant (Kb) is 4.37×10(4)M(-1). The in silico test of SMX with DHPS from Escherichia coli and Streptococcus pneumoniae helps to understand drug metabolism and accounts the drug-molecule interactions. The molecular docking of SMX-DNA also helps to predict the interaction feature.

Solvent effects on the photophysical properties of poly[1,4-dihydroxyanthraquinoneimine-1,3-bis(phenylene-ester-methylene)tetramethyldisiloxane]

Absorption and fluorescence spectra of a polyquinoneimine, PQI, built on 1,4-dihydroxyanthraquinone and a siloxane diamine, 1,3-bis(amino-phenylene-ester-methylene)tetramethyldisiloxane, have been investigated in solvents of different polarities. The effect of solvents on the spectral properties was investigated using Lippert-Mataga and Bakhshiev polarity functions and Catalán's multiple linear regression approach. Absorption and fluorescence spectra in studied solvents exhibit hypsochromic and bathochromic shifts, respectively. The polarity of the solvent was the main parameter which changes the spectral properties of PQI. Also, the binary mixtures of chloroform with methanol and dimethyl sulfoxide were used to analyze the intermolecular interactions and preferential solvation. The preferential solvation parameters (local mole fraction (X₂(L)), excess function (δs₂) and preferential solvation constant (KPS)) were calculated from spectral data and discussed as a function of cosolvent content. The values of quantum yield, decreased linearly with increasing solvent polarity (for non-polar and polar solvents).

UV-Vis spectroscopic study and DFT calculation on the solvent effect of trimethoprim in neat solvents and aqueous mixtures

The solvatochromic behavior of trimethoprim (TMP) was analyzed using UV-Vis spectroscopy and DFT methods in neat and binary aqueous solvent mixtures. The effects of solvent dipolarity/polarizability and solvent-solute hydrogen bonding interactions on the absorption maxima were evaluated by means of the linear solvation energy relationship concept of Kamlet and Taft. This analysis indicated that both interactions play an important role in the position of the absorption maxima in neat solvents. The simulated absorption spectra of TMP and TMP:(solvent)n complexes in ACN and H2O using TD-DFT methods were in agreement with the experimental ones. Binary aqueous mixtures containing as co-solvents DMSO, ACN and EtOH were studied. Preferential solvation was detected as a nonideal behavior of the wavenumber curve respective to the analytical mole fraction of co-solvent in all binary systems. TMP molecules were preferentially solvated by the organic solvent over the whole composition range. Index of preferential solvation, as well as the influence of solvent parameters were calculated as a function of solvent composition.