A carbon dots-CdTe quantum dots fluorescence resonance energy transfer system for the analysis of ultra-trace chlortoluron in water

Development of Fluorescent Co (II)-Integrated Carbon Dots and Their Application as a Off-On Mesotrione Detection Sensor

A very simple mesotrione-sensing medium with enhanced sensitivity detection limits has been proposed. A renovated hydrothermal method was adopted for synthesizing fluorescent carbon dots from ethylenediamine and glucose using a Teflon-lined simple autoclave in a GC oven. The resultant carbon dots were characterized via TEM, FTIR, UV-vis, particle size distribution, and EDX and evaluated in a fluorimeter as the sensing medium for mesotrione detection. The binding approach of the Co (II)-integrated glucose-bound carbon dots toward mesotrione is selective, making them an effective sensor for the real sample applications, where majority of the coexisting substances showed insignificant interference effect. Formation of the metastable state due to the molecular interaction between carbon dots and Co (II) resulted in fluorescence quenching at 456 nm. Enhancement in the fluorescence intensity occurred when mesotrione was added in the concentration range of 0.2-5.0 μg mL-1, with a limit of detection, limit of quantification, standard deviation, and relative standard deviation of 0.054, 0.164, 0.00082 μg mL-1, and 0.682%, respectively. Mesotrione determination was demonstrated in soil, water, and tomato samples with recoveries in the range of 95.38-104.7%. The selectivity of the sensor was found to be good enough when checked for the complex tomato sample spiked with different pesticides of the triketone family having structural similarities to mesotrione.

Gold@Carbon Quantum Dots Nanocomposites Based Two-In-One Sensor: A Novel Approach for Sensitive Detection of Aminoglycosides Antibiotics in Food Samples

Antibiotics are life-saving drugs for humans, but their unwanted use leads to antibacterial resistance (ABR) and causes serious health problems. The excess of these antibiotics entered to the food chain and caused food contamination. Here, Au@CQDs nanocomposites (NCs) was used as a two-in-one sensor to detect two antibiotics. The color change of AuNCs and fluorescence resonance energy transfer are two distance-dependent phenomena used as sensing mechanisms. In the sensing process, Au@CQDs NCs change their color, enhancing the fluorescence intensity of NCs in the presence of Gentamicin (GENTA) and Kanamycin (KMC) antibiotics. The limit of detection of 116 nM and 133 nM for GENTA and 195 nM and 120 nM for KMC have been achieved with colorimetric and fluorimetric readout, respectively. The practicality of the reported sensor was evaluated in real spiked samples and showed excellent recovery efficiency. Therefore this two-in-one sensor can be used for the food monitoring system.

Synthesis of fructose bound Fe(iii) integrated carbon dots as a robust turn-off detection sensor for chlortoluron

A simple, sensitive, and robust fluorescent sensor for chlortoluron detection has been developed. Fluorescent carbon dots were synthesized using ethylene diamine and fructose via a hydrothermal protocol. The molecular interaction between fructose carbon dots and Fe(iii) resulted in a fluorescent metastable state exhibiting remarkable fluorescence quenching at λ_em of 454 nm and interestingly, further quenching occurred upon the addition of chlortoluron. The quenching in the fluorescence intensity of CDF-Fe(iii) towards chlortoluron occurred in the concentration range of 0.2-5.0 μg mL^-1 where the limit of detection was found to be 0.0467 μg mL^-1, the limit of quantification was 0.14 μg mL^-1, and the relative standard deviation was 0.568%. The selective and specific recognitive nature of the Fe(iii) integrated fructose bound carbon dots towards the chlortoluron make it a suitable sensor for real sample applications. The proposed strategy was applied for the determination of chlortoluron in soil, water, and wheat samples with recoveries in the range of 95% to 104.3%.

A Rapid, Fluorescence Switch-On Biosensor for Early Diagnosis of Sorghum Mosaic Virus

For the first time, a nanobiosensor was established for Sorghum mosaic virus (SrMV) detection. The biosensor consists of cadmium telluride quantum dots (CdTe QDs) conjugated to the specific antibody (Ab) against SrMV coat protein (CP) and carbon quantum dots (C QDs) labeled with SrMV coat protein. The formation of the fluorophore-quencher immunocomplex CdTe QDs-Ab+C QDs-CP led to a distinct decrease in the fluorescence intensity of CdTe QDs. Conversely, the emission intensity of CdTe QDs recovered upon the introduction of unlabeled CP. The developed biosensor showed a limit of detection of 44 nM in a linear range of 0.10-0.54 μM and exhibited the strongest fluorescence intensity (about 47,000 a.u.) at 552 nm. This strategy was applied to detect purified CP in plant sap successfully with a recovery rate between 93-103%. Moreover, the feasibility of the proposed method was further verified by the detection of field samples, and the results were consistent with an enzyme-linked immunosorbent assay (ELISA). Contrarily to ELISA, the proposed biosensor did not require excessive washing and incubation steps, thus the detection could be rapidly accomplished in a few minutes. The high sensitivity and short assay time of this designed biosensor demonstrated its potential application in situ and rapid detection. In addition, the fluorescence quenching of CdTe QDs was attributed to dynamic quenching according to the Stern-Volmer equation.

Recent advances in synthesis and modification of carbon dots for optical sensing of pesticides

Serious threat from pesticide residues to the ecosystem and human health has become a global concern. Developing reliable methods for monitoring pesticides is a world-wide research hotspot. Carbon dots (CDs) with excellent photostability, low toxicity, and good biocompatibility have been regarded as the potential substitutes in fabricating various optical sensors for pesticide detection. Based on the relevant high-quality publications, this paper first summarizes the current state-of-the-art of the synthetic and modification approaches of CDs. Then, a comprehensive overview is given on the recent advances of CDs-based optical sensors for pesticides over the past five years, with a particular focus on photoluminescent, electrochemiluminescent and colorimetric sensors regarding the sensing mechanisms and design principles by integrating with various recognition elements including antibodies, aptamers, enzymes, molecularly imprinted polymers, and some nanoparticles. Novel functions and extended applications of CDs as signal indicators, catalyst, co-reactants, and electrode surface modifiers, in constructing optical sensors are specially highlighted. Beyond an assessment of the performances of the real-world application of these proposed optical sensors, the existing inadequacies and current challenges, as well as future perspectives for pesticide monitoring are discussed in detail. It is hoped to provide powerful insights for the development of novel CDs-based sensing strategies with their wide application in different fields for pesticide supervision.

Onsite/on-field analysis of pesticide and veterinary drug residues by a state-of-art technology: A review

Pesticides and veterinary drugs are generally employed to control pests and insects in crop and livestock farming. However, remaining residues are considered potentially hazardous to human health and the environment. Therefore, regular monitoring is required for assessing and legislation of pesticides and veterinary drugs. Various approaches to determining residues in various agricultural and animal food products have been reported. Most analytical methods involve sample extraction, purification (cleanup), and detection. Traditional sample preparation is time-consuming labor-intensive, expensive, and requires a large amount of toxic organic solvent, along with high probability for the decomposition of a compound before the analysis. Thus, modern sample preparation techniques, such as the quick, easy, cheap, effective, rugged, and safe method, have been widely accepted in the scientific community for its versatile application; however, it still requires a laboratory setup for the extraction and purification processes, which also involves the utilization of a toxic solvent. Therefore, it is crucial to elucidate recent technologies that are simple, portable, green, quick, and cost-effective for onsite and infield residue detections. Several technologies, such as surface-enhanced Raman spectroscopy, quantum dots, biosensing, and miniaturized gas chromatography, are now available. Further, several onsite techniques, such as ion mobility-mass spectrometry, are now being upgraded; some of them, although unable to analyze field sample directly, can analyze a large number of compounds within very short time (such as time-of-flight and Orbitrap mass spectrometry). Thus, to stay updated with scientific advances and analyze organic contaminants effectively and safely, it is necessary to study all of the state-of-art technology.

Ultrasensitive fluorescent detection of pesticides in real sample by using green carbon dots

Pesticides, widely used in modern agriculture, could potentially cause environmental pollution and affect human lives. Hence, the development of a highly sensitive sensing element to detect pesticide residues is crucial for food safety and ecosystem protection. Optical methods based on fluorescence properties provide an ideal approach for screening and quantification of these compounds in different medias including water, plant, and nutritional products. The development of fluorescence emitting carbon dot-based sensors for monitoring pesticides has attracted great attention in recent years. In comparison to other fluorophores, carbon dots have more promising optical features, higher quantum yields and better biocompatibility. This article aims to present a novel fluorescent sensing method of diazinon, glyphosate, and amicarbazone using plant-based carbon dots. A comprehensive characterization of carbon dots obtained from cauliflower was performed by methods including UV-visible, FTIR spectroscopy, fluorometry, AFM, DLS, and zeta sizer. Following this step, carbon dots were used to detect pesticides. The fluorescence quenching property of carbon dots has been utilized to identify detection limit of 0.25, 0.5, and 2 ng ml-1 for diazinon, amicarbazone, and glyphosate, respectively. Also, real sample study revealed that the detection of pesticides accompanied by our developed nano-sensor is repeatable and accurate. According to carbon dots specificity determination, the prepared nano sensor does not have the potential to identify "bromacil" and "dialen super" pesticides but the other three mentioned pesticides are detectable. The results confirm that synthesized green carbon dots are well qualified for application in food safety and environmental monitoring.

Photoinduced holes transfer based visual determination of dopamine in human serum

A simple unexplored strategy was followed to construct ratiometric fluorescence-based sensing system for the detection of dopamine (DA) in human serum. Ratiometric fluorescence system was constructed through bonding energy transfer (TBET) by conjugating carboxyl functionalized CdTe quantum dots (QDs) and amine-capped Carbon quantum dots (CQDs). The photophysical properties of sensing system were characterized by standard methods. Photoluminescence (PL) of sensing system under excitonic wavelength (350 nm) depends on dual emission at 440 and 595 nm that corresponds to CQDs and CdTe QDs respectively. The developed sensing system was utilized for visual determination of DA, an unquenched blue fluorescence of CQDs in ratiometric system reveals the visual color differentiation for DA binding with CdTe QDs among the possible interferences (Alanine, Glycine, Glucose, Sucrose, Urea and Ascorbic acid). The limit of detection (LOD) and quantification (LOQ) was calculated as 8.1 and 27.2 nm respectively by using regression analysis. Photoinduced holes transfer (PHT) might have attributed the possible sensing mechanism for DA that quench the photoluminescence sequentially to enhance the sensing performance of QDs. The matrix interferences and reliability of the developed sensing platform were evaluated by testing DA spiked human serum and the sensing response was found to be field deployable.

Advances in the integration of quantum dots with various nanomaterials for biomedical and environmental applications

Quantum dots (QDs) are semiconductor nanocrystals with distinct characteristics of high brightness, large Stokes shift and broad absorption spectra, large molar extinction coefficients, high quantum yield, good photostability and long fluorescence lifetime. The QDs have replaced the conventional fluorophores with wide applications in immunoassays, microarrays, fluorescence imaging, targeted drug delivery and therapy. The integration of QDs with various nanomaterials such as noble metal nanoparticles, carbon allotropes, upconversion nanoparticles (UCNPs), metal oxides and metal-organic frameworks (MOFs) brings new opportunities and possibilities in nanoscience and nanotechnology. In this review, we summarize the recent advances in the integration of QDs with various nanomaterials for biomedical and environmental applications including sensing, bioimaging, theranostics and cancer therapy. We highlight the involved interactions such as fluorescence resonance energy transfer (FRET), plasmon enhanced fluorescence (PEF), and nanometal surface energy transfer (NSET) as well as the synergistic effect resulting from the integration of QDs with nanomaterials. In addition, we discuss the sensing and imaging mechanisms of different strategies and give new insight into the challenges and future direction as well.

Quantum Dots Applied to Methodology on Detection of Pesticide and Veterinary Drug Residues

The pesticide and veterinary drug residues brought by large-scale agricultural production have become one of the issues in the fields of food safety and environmental ecological security. It is necessary to develop the rapid, sensitive, qualitative and quantitative methodology for the detection of pesticide and veterinary drug residues. As one of the achievements of nanoscience, quantum dots (QDs) have been widely used in the detection of pesticide and veterinary drug residues. In these methodology studies, the used QD-signal styles include fluorescence, chemiluminescence, electrochemical luminescence, photoelectrochemistry, etc. QDs can also be assembled into sensors with different materials, such as QD-enzyme, QD-antibody, QD-aptamer, and QD-molecularly imprinted polymer sensors, etc. Plenty of study achievements in the field of detection of pesticide and veterinary drug residues have been obtained from the different combinations among these signals and sensors. They are summarized in this paper to provide a reference for the QD application in the detection of pesticide and veterinary drug residues.

Rapid Determination of H2S Poisoning in a Forensic Study Using a Novel Fluorescence Assay Based on Zn/Cu@BSA Nanoclusters

The quantitative determination of H2S in the blood can provide valid evidence for H2S poisoning through occupational exposure. However, known traditional methods for the detection of H2S in blood are time consuming, require complicated pretreatments, and have low sensitivity. In this paper, a new fluorescence sensing assay is proposed for the rapid detection of H2S poisoning in forensic cases based on bovine serum albumin (BSA)-stabilised zinc/copper (Zn/Cu) bi-metal nanoclusters (Zn/Cu@BSA NCs). The as-prepared Zn/Cu@BSA NCs probes have been characterised by UV-vis absorption and fluorescence spectroscopy. The fluorescence of Zn/Cu@BSA NCs can be quenched through specific interactions between HS−/S2− and the Zn2+/Cu2+ bi-metal ions. Under optimised conditions, the fluorescence sensing method was linear in the concentration range of 2.5 nM to 30 mM with 0.69 nM as the limit of detection. Moreover, the practical feasibility of this fluorescence sensing method has also been demonstrated by the analysis of mice blood samples containing different levels of sulfide and human blood samples from forensic cases of H2S poisoning. Compared with gas chromatography/mass spectrometry (GC/MS), this fluorescence sensing method is quite simple, straightforward, and can be accurate for the quantitative determination of H2S poisoning in a few minutes for forensic analysis. Overall, this is the first report of a bi-metal fluorescence sensing assay for detecting H2S poisoning directly in blood. This research may provide a new approach for forensic toxicologists to monitor poisoning by H2S using a fluorescence-sensing method.

Electronic compensation-induced stabilization of carbon dots@PMMA under UV aging

As-prepared FOCDs could enhance the stability of optical polymers under UV aging through timely electron compensation with no deterioration in transparency.

One-step preparation of carbon dot-grafted trisodium citrate dihydrate for tunable photoluminescence and white light-emitting diodes

Emitting-color of (B-CDs/SC and Y-CDs/SC)-based composites can be systematically tailored. Meanwhile, both of them can be successfully fabricated in WLEDs.

Biosensing with Förster Resonance Energy Transfer Coupling between Fluorophores and Nanocarbon Allotropes

Nanocarbon allotropes (NCAs), including zero-dimensional carbon dots (CDs), one-dimensional carbon nanotubes (CNTs) and two-dimensional graphene, exhibit exceptional material properties, such as unique electrical/thermal conductivity, biocompatibility and high quenching efficiency, that make them well suited for both electrical/electrochemical and optical sensors/biosensors alike. In particular, these material properties have been exploited to significantly enhance the transduction of biorecognition events in fluorescence-based biosensing involving Förster resonant energy transfer (FRET). This review analyzes current advances in sensors and biosensors that utilize graphene, CNTs or CDs as the platform in optical sensors and biosensors. Widely utilized synthesis/fabrication techniques, intrinsic material properties and current research examples of such nanocarbon, FRET-based sensors/biosensors are illustrated. The future outlook and challenges for the research field are also detailed.