A multifunctional Schiff base as a fluorescence sensor for Fe3+ and Zn2+ ions, and a colorimetric sensor for Cu2+ and applications

Tri-armed Schiff base fluorescent sensor for the rapid recognition of Zn(II): application in live cell imaging, test strips and TLC

Various metal ions exist in nature and human beings and play limitless vital roles in both the atmosphere and biology. A fundamental and useful aspect is the qualitative and quantitative assessment of Zn(II) at concentration levels as low as parts per billion (ppb). Thus, the design and development of novel fluorescent turn-on receptors have gained significant interest because of their potential for use in live cell imaging to detect biologically relevant metal ions with high selectivity and sensitivity. The present research illustrates the design and synthesis of a novel fluorescent sensor [(1,3,5-triazine-2,4,6-triyl)tris(hydrazine-2-yl-1-ylidene)tris(methaneylylidene)]tris(2,4-di-tert-butylphenol) (THDBP) for the selective and sensitive probing of Zn(II). The sensor exhibited a fluorescence turn-on mechanism upon treatment with Zn(II) ions at λemi. 503 nm in aq. acetonitrile. The formation of a 1 : 3 complex between THDBP and Zn(II) is confirmed from the Job plot and ESI-MS spectrum. The evaluated limit of detection (LOD) and association constant (Ka) of the sensor THDBP for Zn(II) were found to be 1.03 × 10-10 M and 2.33 × 108 M-1, respectively. Further research demonstrates the practical application of the sensor for the detection of Zn(II) ions in live cells. The sensing ability of the sensor THDBP was also explored through inexpensive test strips and TLC sheets.

Diaminonaphthalene functionalized LUS-1 as a fluorescence probe for simultaneous detection of Hg2+ and Fe3+ in Vetiver grass and Spinach

One of the important problems in the environment is heavy metal pollution, and fluorescence is one of the best methods for their detection due to its sensitivity, selectivity, and relatively rapid and easy operation. In this study, 1,8-diaminonaphthalene functionalized super-stable mesoporous silica (DAN-LUS-1) was synthesized and used as a fluorescence probe to identify Hg2+ and Fe3+ in food samples. The TGA and FT-IR spectra illustrated that 1,8-diaminonaphthalene was grafted into LUS-1. XRD patterns verified that the LUS-1 and functionalized mesoporous silica have a hexagonal symmetrical array of nano-channels. SEM images showed that the rod-like morphology of LUS-1 was preserved in DAN-LUS-1. Also, surface area and pore diameter decreased from 824 m2 g⁻1 and 3.61 nm for the pure LUS-1 to 748 m2 g⁻1 and 3.43 nm for the DAN-LUS-1, as determined by N₂ adsorption-desorption isotherms. This reduction demonstrated that 1,8-diaminonaphthalene immobilized into the pore of LUS-1. The DAN-LUS-1 fluorescence properties as a chemical sensor were studied with a 340/407 nm excitation/emission wavelength that was quenched by Hg2+ and Fe3+ ions. Hg2+ and Fe3+ were quantified using the fluorescence response in the working range 8.25-13.79 × 10-6 and 3.84-10.71 × 10-6 mol/L, with detection limits of 8.5 × 10-8 M and 1.3 × 10-7 M, respectively. Hg2+ and Fe3+ were measured in vetiver grass and spinach. Since the Fe3+ quenching can move in the opposite direction with sodium hexametaphosphate (SHMP) as a hiding compound for Fe3+, consequently, the circuit logic system was established with Fe3+, Hg2+, and SHMP as inputs and the fluorescent quench as the output.

Advances in chromone-based copper(ii) Schiff base complexes: synthesis, characterization, and versatile applications in pharmacology and biomimetic catalysis

Chromones are well known as fundamental structural elements found in numerous natural compounds and medicinal substances. The Schiff bases of chromones have a much wider range of pharmacological applications such as antitumor, antioxidant, anti-HIV, antifungal, anti-inflammatory, and antimicrobial properties. A lot of research has been carried out on chromone-based copper(ii) Schiff-base complexes owing to their role in the organometallic domain and promise as potential bioactive cores. This review article is centered on copper(ii) Schiff-base complexes derived from chromones, highlighting their diverse range of pharmacological applications documented in the past decade, as well as the future research opportunities they offer.

Heterocyclic fluorescent Schiff base chemosensors for the detection of Fe(III) and Cu(II) ions

Two new Schiff bases were synthesized from 1-(2,4-dihydroxyphenyl)ethanone and pyridine derivatives. Both compounds were characterized using infrared, UV-Vis., 1H NMR, 13C NMR and mass spectral studies. Density functional theory (DFT) calculations were performed for both the Schiff bases with 6-31G(d, p) as the basis set. Vibrational frequencies calculated using the theoretical method were in good agreement with the experimental values. Both the Schiff bases were highly fluorescent in nature. The cation-recognizing profile of the compounds was investigated in aqueous methanol medium. The Schiff base 4-(1-(pyridin-4-ylimino)ethyl)benzene-1,3-diol (PYEB) was found to interact with Fe(III) and Cu(II) ions, whereas the Schiff base 4,4'-((pyridine-2,3-diylbis(azanylylidene))bis(ethan-1-yl-1-ylidene))bis(benzene-1,3-diol) (PDEB) was found to detect Cu(II) ions. The mechanism of recognition was established as combined excited state intramolecular proton transfer (ESIPT)-chelation-enhanced fluorescence (CHEF) effect and chelation-enhanced quenching (CHEQ) process for the detection of Fe(III) and Cu(II) ions, respectively. The stability constant of the metal complexes formed during the sensing process was determined. The limit of detection for Fe(III) and Cu(II) ions with respect to Schiff base PYEB was found to be 1.64 × 10-6 and 2.16 × 10-7 M, respectively. With respect to Schiff base PDEB, the limit of detection for Cu(II) ion was found to be 4.54 × 10-4 M. The Cu(II) ion sensing property of the Schiff base PDEB was applied in bioimaging studies for the detection of HeLa cells.

New fluorescent Schiff base modified nanocellulose-based chemosensors for the selective detection of Fe3+, Zn2+ and Cu2+ in semi-aqueous media and application in seawater sample

Stimulus-responsive fluorescent-modified biopolymers have received significant attention in the field of chemosensors. Herein, four new fluorescent dyes, namely, S1: (PDA-DANC), S2: (SAL-PDA-DANC), S3: (BrSAL-PDA-DANC) and S4: (ClSAL-PDA-DANC) have been successfully synthesized from 2,3-dialdehyde nanocellulose (DANC) for the detection of heavy metals. The microstructural and photophysical properties of nanocellulose (NC), microcrystalline cellulose (DANC) and the synthesized S1 to S4 dyes were investigated by FT-IR, SEM-EDX, XRD, TGA, DLS and photoluminescence. NC, obtained from conversion of MCC, shows an average size of 802.4 nm with 0.141 of polydispersity index (PdI), and a crystalline index (CI) of 82.40 % and crystallite size of 4.68 nm. The synthesized dyes present good fluorescent properties and have been therefore exploited for developing new probes for heavy metal ions detection. Remarkable "turn off" and/or "turn on" behaviors with Fe3+ and Cu2+ and with Zn2+ in DMF/water solution have been demonstrated, allowing the sensitive and selective determination of these heavy metal ions with a low limit of detection (LOD). Finally, the evaluation of the Fe3+ sensing in a real seawater sample was investigated.

A comprehensive review on monitoring and purification of water through tunable 2D nanomaterials

Instead of typical household trash, the heavy metal complexes, organic chemicals, and other poisons produced by huge enterprises threaten water systems across the world. In order to protect our drinking water from pollution, we must keep a close eye on the situation. Nanotechnology, specifically two-dimensional (2D) nanomaterials, is used in certain wastewater treatment systems. Graphene, g-C3N4, MoS2, and MXene are just a few examples of emerging 2D nanomaterials that exhibit an extraordinary ratio of surface (m3), providing material consumption, time consumption, and treatment technique for cleaning and observing water. In this post, we'll talk about the ways in which 2D nanomaterials may be tuned to perform certain functions, namely how they can be used for water management. The following is a quick overview of nanostructured materials and its possible use in water management: Also discussed in length are the applications of 2D nanomaterials in water purification, including pollutant adsorption, filtration, disinfection, and photocatalysis. Fluorescence sensors, colorimetric, electrochemical, and field-effect transistors are only some of the devices being studied for their potential use in monitoring water quality using 2D nanomaterials. Utilizing 2D content has its benefits and pitfalls when used to water management. New developments in this fast-expanding business will boost water treatment quality and accessibility in response to rising awareness of the need of clean, fresh water among future generations.

Oxadiazole Schiff Base as Fe3+ Ion Chemosensor: "Turn-off" Fluorescent, Biological and Computational Studies

Compound, (E)-5-(4-((thiophen-2-ylmethylene)amino)phenyl)-1,3,4-oxadiazole-2-thiol (3) was synthesized via condensation reaction of 5-(4-aminophenyl)-1,3,4-oxadiazole-2-thiol with thiophene-2-carbaldehyde in ethanol. For the synthesis and structural confirmation the FT-IR, ¹H, ¹³C-NMR, UV-visible spectroscopy, and mass spectrometry were carried out. The long-term stability of the probe (3) was validated by the experimental as well as theoretical studies. The sensing behaviour of the compound 3 was monitored with various metal ions (Ca²⁺, Cr³⁺, Fe³⁺, Co²⁺, Mg²⁺, Na⁺, Ni²⁺, K⁺) using UV- Vis. and fluorescence spectroscopy techniques by various methods (effect of pH and density functional theory) which showing the most potent sensing behaviour with iron. Job's plot analysis confirmed the binding stoichiometry ratio 1:1 of Fe³⁺ ion and compound 3. The limit of detection (LOD), the limit of quantification (LOQ), and association constant (K_a) were calculated as 0.113 µM, 0.375 µM, and 5.226 × 10⁵ respectively. The sensing behavior was further confirmed through spectroscopic techniques (FT-IR and ¹H-NMR) and DFT calculations. The intercalative mode of binding of oxadiazole derivative 3 with Ct-DNA was supported through UV-Vis spectroscopy, fluorescence spectroscopy, viscosity, cyclic voltammetry, and circular dichroism measurements. The binding constant, Gibb's free energy, and stern-volmer constant were find out as 1.24 × 10⁵, -29.057 kJ/mol, and 1.82 × 10⁵ respectively. The cleavage activity of pBR322 plasmid DNA was also observed at 3 × 10^-5 M concentration of compound 3. The computational binding score through molecular docking study was obtained as -7.4 kcal/mol. Additionally, the antifungal activity for compound 3 was also screened using broth dilution and disc diffusion method against C. albicans strain. The synthesized compound 3 showed good potential scavenging antioxidant activity against DPPH and H₂O₂ free radicals.

An effective dual sensor for Cu2+ and Zn2+ with long-wavelength fluorescence in aqueous media based on biphenylacrylonitrile Schiff-base

Although some sensors for Cu²⁺ and Zn²⁺ had been reported, the sensor with long-wavelength emission in aqueous media for in-situ detecting Cu²⁺ and Zn²⁺ was always expected. Herein, a biphenylacrylonitrile Schiff-base (OPBS) with large aromatic conjugated system was designed and synthesized in yield of 82%. OPBS possessed excellent long-wavelength fluorescence at 550-750 nm in aqueous media, which selectively response to sense Cu²⁺ with quenched fluorescence and Zn²⁺ with chromotropic fluorescence from red to yellow. The detection of Cu²⁺ and Zn²⁺ were realized without mutual interference in their coexistence system by means of the assistance of ATP. The detection limits were 2.3 × 10^-7 M for Cu²⁺ and 1.8 × 10^-6 M for Zn²⁺, respectively. The sensing mechanism was elucidated by binding MS spectra, fluorescence Job's plot and ¹H NMR spectra. Moreover, OPBS exhibited good bioimaging performance and the in-situ sensing abilities for Cu²⁺ and Zn²⁺ in living cells, suggesting the application potential for detecting Cu²⁺ and Zn²⁺ in both vitro assay and vivo environment.

Design and Synthesis of Dipeptidomimetic Isocyanonaphthalene as Enhanced-Fluorescent Chemodosimeter for Sensing Mercury Ion and Living Cells

A novel valine-based isocyanonaphthalene (NpI) was designed and synthesized by using an easy method and enabled the selective fluorescence detection of Hg2+. The chemodosimeter can display an immediate turn-on fluorescence response (500-fold) towards target metal ions upon the Hg2+-mediated conversion of isocyano to amino within NpI. Based on this specific reaction, the fluorescence-enhancement probe revealed a high sensitivity toward Hg2+ over other common metal ions and exhibited excellent aqueous solubility, good antijamming capability, high sensitivity (detection limit: 14.2 nM), and real-time detection. The response mechanism of NpI was supported by NMR spectroscopy, MS analysis and DFT theoretical calculation using various techniques. Moreover, a dipeptidomimetic NpI probe was successfully applied to visualize intracellular Hg2+ in living cells and monitor Hg2+ in real water samples with good recoveries and small relative standard deviations.

A Review on Organic Colorimetric and Fluorescent Chemosensors for the Detection of Zn(II) Ions

Organic compounds display several electronic and structural features which enable their application in various fields, ranging from biological to non-biological. These compounds contain heteroatoms like sulfur, nitrogen and, oxygen, which provide coordination sites to act as ligands in the field of coordination chemistry and are used as chemosensors to detect various metal ions. This review article covers different organic compounds including Schiff bases, thiourea, pyridine, rhodamine, triazole, pyrene, coumarin, imidazole, diaminomaleonitrile, naphthoxazole, pyrimidine, thiophene, thioether, and other functional groups based chemosensors that contain heteroatoms like sulfur, nitrogen and, oxygen for fluorimetric and colorimetric detection of Zn(II) ions in different environmental, agricultural, and biological samples. Further, the sensing performances of these chemosensors have been compared and discussed which could help the readers for the future design of organic fluorescent and colorimetric chemosensors for the detection of Zn(II) ions. We hope this study will support the new thoughts to design a simple, efficient, selective, and sensitive chemosensor for the detection of Zn(II) ions in different samples (environmental, agricultural, and biological).

Idiosyncratic recognition of Zn2+ and CN- using Pyrazolyl-Hydroxy-Coumarin scaffold and live cell imaging: Depiction of Luminescent Zn(II)-Metallocryptand

Multi-responsive sensitive and selective sensor design is one of the stimulating researches in sensor field. We have designed a pyrazolyl-hydroxy-coumarin scaffold, 7-hydroxy-4-methyl-8-(((5-phenyl-1H-pyrazol-3-yl)imino)methyl)-2H-chromen-2-one (H2L) and characterized by spectroscopic data (1H-NMR,13C-NMR, ESI-MS,...

Two-Dimensional Material-Based Colorimetric Biosensors: A Review

Two-dimensional (2D) materials such as graphene, graphene oxide, transition metal oxide, MXene and others have shown high potential for the design and fabrication of various sensors and biosensors due to their 2D layered structure and unique properties. Compared to traditional fluorescent, electrochemical, and electrical biosensors, colorimetric biosensors exhibit several advantages including naked-eye determination, low cost, quick response, and easy fabrication. In this review, we present recent advances in the design, fabrication, and applications of 2D material-based high-performance colorimetric biosensors. Potential colorimetric sensing mechanisms and optimal material selection as well as sensor fabrication are introduced in brief. In addition, colorimetric biosensors based on different 2D materials such as graphene, transition metal dichalcogenide/oxide, MXenes, metal-organic frameworks, and metal nanoplates for the sensitive detection of DNA, proteins, viruses, small molecules, metallic ions, and others are presented and discussed in detail. This work will be helpful for readers to understand the knowledge of 2D material modification, nanozymes, and the synthesis of hybrid materials; meanwhile, it could be valuable to promote the design, fabrication, and applications of 2D material-based sensors and biosensors in quick bioanalysis and disease diagnostics.

An aniline trimer-based multifunctional sensor for colorimetric Fe3+, Cu2+ and Ag+ detection, and its complex for fluorescent sensing of L-tryptophan

The detection of metal ions and amino acids by the aniline oligomer-based receptor has not been reported yet, to the best of our knowledge. In this study, an efficient multifunctional cation-amino acid sensor (CAS) with aniline moiety and chiral thiourea binding site was synthesized by the reaction of aniline trimer and (S)-(+)-1-phenyl ethyl isothiocyanate. CAS can sense Fe³⁺, Cu²⁺, Ag⁺ ions, and L-tryptophan. These results can be recognized by the naked eye. The appropriate pH range for the quantitative analysis of Fe³⁺, Cu^2+, and Ag⁺ by CAS in DMSO/water (30 vol% water) was evaluated. The interaction between CCS and metal ions was analyzed by ¹H NMR titration. The detection limits of CAS for the Cu²⁺, Ag^+, and Fe³⁺ were 0.214, 0.099, and 0.147 μM, respectively. Moreover, the CASCu²⁺ complex can act as a turn-on fluorescence sensor for L-tryptophan. On the contrary, there is no response upon the addition of other amino acids, such as L-histidine, L-proline, L-phenylalanine, L-threonine, L-methionine, L-tyrosine, and L-cystine to CASCu²⁺ complex.

Rhodamine-azobenzene based single molecular probe for multiple ions sensing: Cu2+, Al3+, Cr3+ and its imaging in human lymphocyte cells

A photoinduced electron transfer (PET) and chelation-enhanced fluorescence (CHEF) regulated rhodamine-azobenzene chemosensor (L) was synthesized for chemoselective detection of Al³⁺, Cr³⁺, and Cu²⁺ by UV-Visible absorption study whereas Al³⁺ and Cr³⁺ by fluorimetric study in EtOH-H₂O solvent. L showed a clear fluorescence emission enhancement of 21 and 16 fold upon addition of Al³⁺ and Cr³⁺ due to the 1:1 host-guest complexation, respectively. This is first report on rhodamine-azobenzene based Cr³⁺ chemosensor. The complex formation, restricted imine isomerization, inhibition of PET (photo-induced electron transfer) process with the concomitant opening of the spirolactam ring induced a turn-on fluorescence response. The higher binding constants 6.7 × 10³ M^-1 and 3.8 × 10³ M^-1 for Al³⁺ and Cr³⁺, respectively and lower detection limits 1 × 10^-6 M and 2 × 10^-6 M for Al³⁺ and Cr³⁺, respectively in a buffered solution with high reversible nature describes the potential of L as an effective tool for detecting Al³⁺ and Cr³⁺ in a biological system with higher intracellular resolution. Finally, L was used to map the intracellular concentration of Al³⁺ and Cr³⁺ in human lymphocyte cells (HLCs) at physiological pH very effectively. Altogether, our findings will pave the way for designing new chemosensors for multiple analytes and those chemosensors will be effective for cell imaging study.

Two novel rhodamine-based fluorescent probes for the rapid and sensitive detection of Fe3+: Experimental and DFT calculations

Fe³⁺ ions play an important role in both biological and environmental field. In this work, two novel rhodamine-based colorimetric and fluorescent probes (RBA2 and RBA3) were designed and synthesized for the efficient detection of Fe³⁺. Upon the addition of Fe³⁺, the fluorescence intensity of RBA2 and RBA3 enhanced 108-fold and 222-fold, respectively. RBA2 and RBA3 exhibited a low detection limit which could achieve 12.8 nM and 11.0 nM. In addition, the binding modes of RBA2 and RBA3 with Fe³⁺ were proved to be 1:1 stoichiometry in the complexes by Job's plot, ESI-MS and ¹H NMR results. The complexing ability of RBA3 with Fe³⁺ excessed to that of RBA2 that was determined by the binding association constants, and highly consistent with DFT calculations results. Furthermore, RBA2 and RBA3 were further utilized to detect Fe³⁺ in living cells and real water samples, indicating their promising prospects in biological and environmental field.

Novel dual-functional fluorescent sensors based on bis(5,6-dimethylbenzimidazole) derivatives for distinguishing of Ag+ and Fe3+ in semi-aqueous medium

Three novel bisbenzimidazole derivatives have been synthesized and developed as dual-functional fluorescent sensors for the rapid and highly selective detection of Ag⁺ and Fe³⁺ ions in semi-aqueous medium with distinct spectral response for the first time. The absorption intensity is drastically decreased after the addition of Ag⁺. Contrarily, it is markedly increased upon the addition of Fe³⁺. And there is a good linear relation at low concentration of both Ag⁺ and Fe³⁺, which provides a quantitative method for their detection. Similarly, the sensors show a distinct fluorescence response towards Ag⁺ and Fe³⁺ with a different fluorescence color change under UV light. In addition, no significant changes and interference can be observed with other metal ions. The sensing mechanism studies confirm that the N atom in CN of benzimidazole ring of sensor 4a may bind with Ag⁺ or Fe³⁺ ion to form metal complex. And there is only a static quenching process for the 4-Ag⁺ complex system, but both dynamic and static quenching processes occur in the 4-Fe³⁺ complex system. Moreover, sensors 4 can steadily work in solution with a wide range of pH 4-13 and rapidly respond to Ag⁺ and Fe³⁺ with a response time of 10 s. Finally, the sensors have been successfully applied to the visual detection of Ag⁺ and Fe³⁺ not only in solution, but also in test paper.

UV-vis spectral property of a multi-hydroxyl Schiff-base derivative and its colorimetric response to some special metal ions

A multi-hydroxyl Schiff-base derivative, N-2'-hydroxyl-1'-naphthyl methylene-2-amino phenol (HNMAP), was synthesized and characterized by FTIR, ¹H NMR and UV-vis spectroscopy. It was noted to find there was great effect for solvent and pH on the UV-vis spectroscopy of HNMAP. Especially, some metal ions could make its UV-vis spectra changed regularly with different time-resolved effects. For example, a real-time and multi-wavelength response to Fe²⁺ at 520 nm, 466 nm and 447 nm and a quite slow one about 26 min to Fe³⁺ at 447 nm and 466 nm, respectively. Under the optimized conditions, the changes in the corresponding absorption intensities at above wavelengths were in proportion to c_Fe²⁺ or c_Fe³⁺ during respectively partitioned linear ranges, which realized to quantitatively detect Fe²⁺ or Fe³⁺ with a large linear range more than two orders of magnitude. A 1:1 complex mode for HNMAP-Fe²⁺ and 1:2 for HNMAP-Fe³⁺ were proposed from UV-vis spectral titration and Job's plot. HNMAP would be a potential sensor for colorimetric detection of Fe²⁺ and Fe³⁺ in practice.