Colorimetric method for the detection of melamine using in-situ formed silver nanoparticles via tannic acid

Microfluidic paper analytic device (μPAD) technology for food safety applications

Foodborne pathogens, food adulterants, allergens, and toxic chemicals in food can cause major health hazards to humans and animals. Stringent quality control measures at all stages of food processing are required to ensure food safety. There is, therefore, a global need for affordable, reliable, and rapid tests that can be conducted at different process steps and processing sites, spanning the range from the sourcing of food to the end-product acquired by the consumer. Current laboratory-based food quality control tests are well established, but many are not suitable for rapid on-site investigations and are costly. Microfluidic paper analytical devices (μPADs) are a fast-growing field in medical diagnostics that can fill these gaps. In this review, we describe the latest developments in the applications of microfluidic paper analytic device (μPAD) technology in the food safety sector. State-of-the-art μPAD designs and fabrication methods, microfluidic assay principles, and various types of μPAD devices with food-specific applications are discussed. We have identified the prominent research and development trends and future directions for maximizing the value of microfluidic technology in the food sector and have highlighted key areas for improvement. We conclude that the μPAD technology is promising in food safety applications by using novel materials and improved methods to enhance the sensitivity and specificity of the assays, with low cost.

Novel rapid detection of melamine based on the synergistic aggregation of gold nanoparticles

A simple and rapid colorimetric method for the detection of melamine in milk samples is described. Polythymidine oligonucleotide was adsorbed on to the surface of gold nanoparticles (AuNPs), protecting it from aggregation. In the presence of melamine, polythymidine oligonucleotide combined with melamine formed a double-strand DNA-like structure, allowing AuNPs aggregation. In the presence of positively charged SYBR Green I (SG I), AuNPs were further aggregated. In the presence of melamine and SG I, aggregation of AuNPs was synergistic. Thus, in this principle, melamine can be detected visually. Plasmon resonance peak changes enabled detection of melamine quantitatively using UV-vis spectroscopy. The limit of detection for this colorimetric method was 16 μg L^-1 with a good linear range from 19.5 μg L^-1 to 1.25 × 10³ μg L^-1, and detection took only 1 min. The method was successfully applied for detection of melamine in milk samples.

Plasmonic nanoparticle's anti-aggregation application in sensor development for water and wastewater analysis

Colorimetric sensors have emerged as a powerful tool in the detection of water pollutants. Plasmonic nanoparticles use localized surface plasmon resonance (LSPR)-based colorimetric sensing. LSPR-based sensing can be accomplished through different strategies such as etching, growth, aggregation, and anti-aggregation. Based on these strategies, various sensors have been developed. This review focuses on the newly developed anti-aggregation-based strategy of plasmonic nanoparticles. Sensors based on this strategy have attracted increasing interest because of their exciting properties of high sensitivity, selectivity, and applicability. This review highlights LSPR-based anti-aggregation sensors, their classification, and role of plasmonic nanoparticles in these sensors for the detection of water pollutants. The anti-aggregation based sensing of major water pollutants such as heavy metal ions, anions, and small organic molecules has been summarized herein. This review also provides some personal insights into current challenges associated with anti-aggregation strategy of LSPR-based colorimetric sensors and proposes future research directions.

Non-invasive detection of COVID-19 using a microfluidic-based colorimetric sensor array sensitive to urinary metabolites

A colorimetric sensor array designed on a paper substrate with a microfluidic structure has been developed. This array is capable of detecting COVID-19 disease by tracking metabolites of urine samples. In order to determine minor metabolic changes, various colorimetric receptors consisting of gold and silver nanoparticles, metalloporphyrins, metal ion complexes, and pH-sensitive indicators are used in the array structure. By injecting a small volume of the urine sample, the color pattern of the sensor changes after 7 min, which can be observed visually. The color changes of the receptors (recorded by a scanner) are subsequently calculated by image analysis software and displayed as a color difference map. This study has been performed on 130 volunteers, including 60 patients infected by COVID-19, 55 healthy controls, and 15 cured individuals. The resulting array provides a fingerprint response for each category due to the differences in the metabolic profile of the urine sample. The principal component analysis-discriminant analysis confirms that the assay sensitivity to the correctly detected patient, healthy, and cured participants is equal to 73.3%, 74.5%, and 66.6%, respectively. Apart from COVID-19, other diseases such as chronic kidney disease, liver disorder, and diabetes may be detectable by the proposed sensor. However, this performance of the sensor must be tested in the studies with a larger sample size. These results show the possible feasibility of the sensor as a suitable alternative to costly and time-consuming standard methods for rapid detection and control of viral and bacterial infectious diseases and metabolic disorders.

In Situ Functionalization of Silver Nanoparticles by Gallic Acid as a Colorimetric Sensor for Simple Sensitive Determination of Melamine in Milk

A simple and green colorimetric sensing assay strategy for highly efficient determination of melamine has been fabricated, which is based on the redox reaction of gallic acid with Ag+. Monodispersed Ag nanoparticles (AgNPs) were obtained using gallic acid as a reducing and stabilizing agent. However, the aggregate behavior of AgNPs was observed, while the melamine was present in the reaction medium. As a result, the color of the solution changed from vivid yellow to brown, and the density of the color was quantitatively correlated with the melamine concentration. The aggregation of AgNPs could be attributable to the formation of hydrogen bonds between melamine and gallic acid. The designed sensor exhibited a good detection limit of 0.099 μM (0.012 ppm), which was much lower than the safety limit in China (1.0 ppm) and EU (2.0 ppm). Additionally, the sensing assay displayed good selectivity toward melamine over other coexisting substances. Consequently, the proposed colorimetric sensor was successfully used for the determination of melamine detection in raw milk samples.

Phytochemicals toward Green (Bio)sensing

Because of numerous inherent and unique characteristics of phytochemicals as bioactive compounds derived from plants, they have been widely used as one of the most interesting nature-based compounds in a myriad of fields. Moreover, a wide variety of phytochemicals offer a plethora of fascinating optical and electrochemical features that pave the way toward their development as optical and electrochemical (bio)sensors for clinical/health diagnostics, environmental monitoring, food quality control, and bioimaging. In the current review, we highlight how phytochemicals have been tailored and used for a wide variety of optical and electrochemical (bio)sensing and bioimaging applications, after classifying and introducing them according to their chemical structures. Finally, the current challenges and future directions/perspective on the optical and electrochemical (bio)sensing applications of phytochemicals are discussed with the goal of further expanding their potential applications in (bio)sensing technology. Regarding the advantageous features of phytochemicals as highly promising and potential biomaterials, we envisage that many of the existing chemical-based (bio)sensors will be replaced by phytochemical-based ones in the near future.

Study on the interactions between B-norcholesteryl benzimidazole compounds with ct-DNA

The study of molecule-DNA interaction is very important for designing an improved therapeutic agent. In previous studies, we synthesized some B-norcholesteryl benzimidazole compounds, and the tests on cancer cells showed that these compounds had good in vitro anti-cancer activities. In order to further investigate mechanism of their actions, three different B-norcholesteryl benzimidazole compounds were selected and interaction of these compounds with the calf thymus DNA (ct-DNA) was monitored by using various methods including UV-Vis and fluorescence spectroscopic techniques, viscosity measurement, and circular dichroism (CD). The results proved a hypochromic effect accompanied with a slight red-shift due to the interaction of the molecules with ct-DNA. According to the UV-Vis and fluorescence spectra, the mentioned compounds were bound to DNA, preferentially through partial intercalation into the DNA helix. Moreover, the ethidium bromide (EB) and Hoechst 33258 competitive binding experiments were also used to confirm the interaction mode of the compounds with ct-DNA. In the Hoechst 33258 displacement experiment, no significant change in the fluorescence intensity was observed. Additional assays such as iodide quenching, viscosity, and CD spectroscopy further confirmed that intercalation should be the major binding mode of the selected compounds with DNA. The cytotoxicity of these three compounds was also evaluated by MTT method, and the results confirmed that binding ability of these compounds to DNA was consistent with their cytotoxicity behavior. The experimental results indicated a higher binding affinity for compound 3 compared to the other compounds. This research provided a better understanding on the molecular mechanism of the interaction between B-norcholesteryl benzimidazole compounds and tumor cells, and offered a beneficial perspective to the designation of novel B-norsteroidal anticancer compounds.

Immobilization of β-galactosidase on tannic acid stabilized silver nanoparticles: A safer way towards its industrial application

In this study, β-galactosidase has been immobilized on tannic acid stabilized silver nanoparticles (AgNPs). Tannic acid is a phytochemical and it is advantageous to use it as a linker molecule for immobilization because of its antidiarrheal and antimicrobial properties, and very low toxicity. AgNPs with immobilized β-galactosidase were characterized for particle size and catalytic properties. The AgNPs consisted of almost monodispersed particles of average diameter of ∼20 nm. β-galactosidase immobilized on tannic acid stabilized AgNPs (83.6% Immobilization yield) exhibited good activity with a high enzyme to carrier ratio as compared to the previous reports. Immobilization did not affect the optimum pH (pH 4.5) of the enzyme, however it retained greater fraction of activity in both alkaline and acidic pH range. The immobilized enzyme exhibited greater fraction of activity at higher temperatures as compared to the soluble enzyme, and its optimum temperature increased by 5 °C. The immobilized enzyme retained almost 60% of its activity after 10th successive use. The immobilized enzyme hydrolyzed 258 and 474 μM lactose from 1% lactose and from milk lactose, respectively, whereas the soluble enzyme hydrolyzed 235 and 424 μM lactose from 1% lactose and from milk lactose, respectively. Excellent activity and stability of β-galactosidase immobilized on AgNPs provides a cost-effective industrial application of this enzyme. β-galactosidase immobilized on tannic acid stabilized AgNPs are free from toxicity hazards of the linker molecules. Hence, it may find constructive enzyme based applications in food technology.

Noble Metal Nanoparticles-Based Colorimetric Biosensor for Visual Quantification: A Mini Review

Nobel metal can be used to form a category of nanoparticles, termed noble metal nanoparticles (NMNPs), which are inert (resistant to oxidation/corrosion) and have unique physical and optical properties. NMNPs, particularly gold and silver nanoparticles (AuNPs and AgNPs), are highly accurate and sensitive visual biosensors for the analytical detection of a wide range of inorganic and organic compounds. The interaction between noble metal nanoparticles (NMNPs) and inorganic/organic molecules produces colorimetric shifts that enable the accurate and sensitive detection of toxins, heavy metal ions, nucleic acids, lipids, proteins, antibodies, and other molecules. Hydrogen bonding, electrostatic interactions, and steric effects of inorganic/organic molecules with NMNPs surface can react or displacing capping agents, inducing crosslinking and non-crosslinking, broadening, or shifting local surface plasmon resonance absorption. NMNPs-based biosensors have been widely applied to a series of simple, rapid, and low-cost diagnostic products using colorimetric readout or simple visual assessment. In this mini review, we introduce the concepts and properties of NMNPs with chemical reduction synthesis, tunable optical property, and surface modification technique that benefit the development of NMNPs-based colorimetric biosensors, especially for the visual quantification. The “aggregation strategy” based detection principle of NMNPs colorimetric biosensors with the mechanism of crosslinking and non-crosslinking have been discussed, particularly, the critical coagulation concentration-based salt titration methodology have been exhibited by derived equations to explain non-crosslinking strategy be applied to NMNPs based visual quantification. Among the broad categories of NMNPs based biosensor detection analyses, we typically focused on four types of molecules (melamine, single/double strand DNA, mercury ions, and proteins) with discussion from the standpoint of the interaction between NMNPs surface with molecules, and DNA engineered NMNPs-based biosensor applications. Taken together, NMNPs-based colorimetric biosensors have the potential to serve as a simple yet reliable technique to enable visual quantification.

Review on Nanomaterial-Based Melamine Detection

Illegal adulteration of milk products by melamine and its analogs has become a threat to the world. In 2008, the misuse of melamine with infant formula caused serious effects on babies of China. Thereafter, the government of China and the US Food and Drug Administration (FDA) limited the use of melamine of 1 mg/kg for infant formula and 2.5 mg/kg for other dairy products. Similarly, the World Health Organization (WHO) has also limited the daily intake of melamine of 0.2 mg/kg body weight per day. Many sensory schemes have been proposed by the scientists for carrying out screening on melamine poisoning. Among them, nanomaterial-based sensing techniques are very promising in terms of real-time applicability. These materials uncover and quantify the melamine by means of diverse mechanisms, such as fluorescence resonance energy transfer (FRET), aggregation, inner filter effect, surface-enhanced Raman scattering (SERS), and self-assembly, etc. Nanomaterials used for the melamine determination include carbon dots, quantum dots, nanocomposites, nanocrystals, nanoclusters, nanoparticles, nanorods, nanowires, and nanotubes. In this review, we summarize and comment on the melamine sensing abilities of these nanomaterials for their suitability and future research directions.

Sensitive and selective detection of Cu2+ ions based on fluorescent Ag nanoparticles synthesized by R-phycoerythrin from marine algae Porphyra yezoensis

In this study, using a natural and green protein R-phycoerythrin (R-PE) extracted from marine Porphyra yezoensis as the stabilizer and reducer, silver nanoparticles (AgNPs) were synthesized. Based on this, a highly sensitive and selective method for the detection of Cu²⁺ ions was developed using R-PE-AgNPs as fluorescent probe. The interactions between R-PE-AgNPs and Cu²⁺ ions were systematically characterized by fluorescence spectroscopy, transmission electron microscopy (TEM), elemental mapping and Fourier transform infrared (FTIR). It was found that Cu²⁺ ions could cause aggregation of the R-PE-AgNPs, accompanied by the greatly increased particle size. Importantly, the method offered a wide linear detection range from 0 μM to 100.0 μM with a detection limit of 0.0190 μM. Moreover, the proposed method was successfully applied to analyze Cu²⁺ ions in tap water and lake water samples, acquiring satisfactory recovery between 91.6% and 102.2%. Such a green, fast and cost-effective fluorimetric method of the R-PE-AgNPs probe has great potential for tracing Cu²⁺ ions in diverse aqueous media.

Colorimetric detection of melamine in milk based on Triton X-100 modified gold nanoparticles and its paper-based application

In this study, we have developed a method for rapid, highly efficient and selective detection of melamine. The negatively charged citrate ions form an electrostatic layer on gold nanoparticles (AuNPs) and keep the NPs dispersed and stable. When citrate-capped AuNPs were further modified with Triton X-100, it stabilized the AuNPs against the conditions of high ionic strength and a broad pH range. However, the addition of melamine caused the destabilization and aggregation of NPs. This may be attributed to the interaction between melamine and the AuNPs through the ligand exchange with citrate ions on the surface of AuNPs leading Triton X-100 to be removed. As a result, the AuNPs were unstable, resulting in the aggregation. The aggregation induced a wine red-to-blue color change, and a new absorption peak around 630nm appeared. Triton X-100-AuNPs could selectively detect melamine at the concentration as low as 5.1nM. This probe was successfully applied to detect melamine in milk. Furthermore, paper-based quantitative detection system using this colorimetric probe was also demonstrated by integrating with a smartphone.