A coumarin-derived Cu2+-fluorescent chemosensor and its direct application in aqueous media

Coumarin Based Fluorescent Probe for Detecting Heavy Metal Ions

Heavy metals such as Iron, Copper, and Zinc are micro-essential trace metal and involve animportant biological role, but it quickly turns toxic at exceeding the permissible limit, causing gastrointestinal irritation, liver, bone, and kidney damage, as well as disorders including Wilson's, Parkinson's, and Alzheimer's. It is important to detect the metal ions as well as their concentration quickly and affordable cost using organic probes. Among the organic probes,the coumarin fluorescent probe shows a very prominent candidate with heavy metal ions. Therefore, in the present review, we reviewed the very recent literature the identify the heavy metals using modified coumarin fluorescent probes. Readers will get information quickly about the method of preparation of modified coumarin core and their use as fluorescent probes with heavy metals using absorption and emission spectroscopic methods along with the probable mechanistic pathway of detection.

Coumarin Derivative and Gold Nanoparticle Conjugate as a Selective Fluorescent Sensor for Mercury Ion in Real Sample

A biphenyl based coumarin fluorescent molecule, N,N'-bis(7-diethylamino-2-oxo-2 H-chromen-3-yl)methylene)biphenyl-2-2'-dicarbohydrazide (molecule 1) has been synthesized and characterised. Photophysical studies of 1 exhibit solvent polarity dependent absorption and emission maxima. Citrate capped gold nanoparticles (AuNPs) have been mixed with molecule 1 for the preparation of AuNPs/1 conjugate. The association constant of the AuNPs/1 conjugate has been calculated to 4.54 × 104 M- 1. The AuNPs/1 conjugate has been found to detect Hg2+ ion selectively by fluorescence enhancement. While addition of molecule 1 into the solution of AuNPs, fluorescence intensity of 1 quenched. On addition of several monovalent, divalent and trivalent metal ion into the solution of AuNPs/1 conjugate separately, there was no change in fluorescence intensity of 1 has been observed. However, upon addition of Hg2+ ion into the solution of AuNPs/1 conjugate, the fluorescence intensity enhancement occurred, indicating released of 1 from the surface of AuNPs and probably aggregation of AuNPs took place in presence of Hg2+ ion. The AuNPs/1 conjugate has been found to have a detection limit of 2.3 × 10- 9 M for Hg2+ ion in aqueous solvent. Meanwhile, the AuNPs/1 conjugate have also been successfully applied for the determination of Hg2+ in real water samples.

Viscosity-sensitive and AIE-active bimodal fluorescent probe for the selective detection of OCl- and Cu2+: a dual sensing approach via DFT and biological studies using green gram seeds

A novel dual-mode viscosity-sensitive and AIE-active fluorescent chemosensor based on the naphthalene coupled pyrene (NCP) moiety was designed and synthesized for the selective detection of OCl- and Cu2+. In non-viscous media, NCP exhibited weak fluorescence; however, with an increase in viscosity using various proportions of glycerol, the fluorescence intensity was enhanced to 461 nm with a 6-fold increase in fluorescence quantum yields, which could be utilized for the quantitative determination of viscosity. Interestingly, NCP exhibited novel AIE characteristics in terms of size and growth in H2O-CH3CN mixtures with high water contents and different volume percentage of water, which was investigated using fluorescence, DLS study and SEM analysis. Interestingly, this probe can also be effectively employed as a dual-mode fluorescent probe for light up fluorescent detection of OCl- and Cu2+ at different emission wavelengths of 439 nm and 457 nm via chemodosimetric and chelation pathways, respectively. The fast-sensing ability of NCP towards OCl- was shown by a low detection limit of 0.546 μM and the binding affinity of NCP with Cu2+ was proved by a low detection limit of 3.97 μM and a high binding constant of 1.66 × 103 M-1. The sensing mechanism of NCP towards OCl- and Cu2+ was verified by UV-vis spectroscopy, fluorescence analysis, 1H-NMR analysis, mass spectroscopy, DFT study and Job plot analysis. For practical applications, the binding of NCP with OCl- and Cu2+ was determined using a dipstick method and a cell imaging study in a physiological medium using green gram seeds.

Luminous Insights: Exploring Organic Fluorescent "Turn-On" Chemosensors for Metal-Ion (Cu+2, Al+3, Zn+2, Fe+3) Detection

There are several metal ions that are vital for the growth of the environmental field as well as for the biological field but only up to the maximum limit. If they are present in excess, it could be hazardous for the human health. With the growing technology, a series of various detection techniques are employed in order to recognize those metal ions, some of them include voltammetry, electrochemical methods, inductively couples, etc. However, these techniques are expensive, time consuming, requires large storage, advanced instrumentation, and a skilled person to operate. So, here comes the need of a sensor and it is defined as a miniature device which detects the substance of interest by giving response in the form of energy change. So, from past few decades, many sensors have been formulated for detecting metal ions with some basic characteristics like selectivity, specificity, sensitivity, high accuracy, lower detection limit, and response time. Detecting various metal ions by employing chemosensors involves different techniques such as fluorescence, phosphorescence, chemiluminescence, electrochemical, and colorimetry. The fluorescence technique has certain advantages over the other techniques. This review mainly focuses on the chemosensors that show a signal in the form of fluorescence to detect Al+3, Zn+2, Cu+2, and Fe+3 ions.

A coumarin-based fluorescent chemosensor as a Sn indicator and a fluorescent cellular imaging agent†

In the present study, fluorogenic coumarin-based probes (1–3) through condensation of 4-hydroxy coumarin with malondialdehyde bis(diethyl acetal)/triethyl orthoformate were prepared. The absorption and fluorescence emission properties of 2b and 3 in different solvents were studied, and a considerable solvatochromic effect was observed. The sensitivity of chemosensors 2b and 3 toward various cations and anions was investigated. It was revealed that compound 3 had a distinct selectivity toward Sn²⁺, possibly via a chelation enhanced quenching mechanism. The fluorescence signal was quenched over the concentration range of 6.6–120 μM, with an LOD value of 3.89 μM. The cytotoxicity evaluation of 3 against breast cancer cell lines demonstrated that the chemosensor was nontoxic and could be used successfully in cellular imaging. The probe responded to tin ions not only via fluorescence quenching, but also through colorimetric signal change. The change in optical properties was observed in ambient conditions and inside living cells.

A fluorogenic and colorimetric coumarin-based probe was synthesized and used for sensing Sn²⁺ inside and ouside of living cells.

Amino-coumarin-based colorimetric and fluorescent chemosensors capable of discriminating Co2+, Ni2+, and Cu2+ ions in solution and potential utilization as a paper-based device

New chemosensors, L1-L3, based on the coumarin Schiff base scaffold with substituent modifications, have been designed and synthesized. The chemosensors L1-L3 exhibited the absorbance and fluorescence spectral changes that can discriminate Co²⁺, Ni²⁺, and Cu²⁺ ions. Sensor L1 demonstrated the ability to respond to Co²⁺, Ni²⁺, and Cu²⁺ ions. Remarkably, the slight modification of substituent on L2 has been observed to cause selective binding to Ni²⁺ and Cu²⁺ ions while L3 can specifically detect Cu²⁺ ions. The in-situ formation of metal and ligand complexes was determined by Job's plot analysis. The limit of detection and the sensing ability of all probes are estimated to be within the range of safe drinking water. Incorporation of the sensing compounds into a paper-based detection system using a laminated paper-based analytical device (LPAD) was demonstrated and found to be consistent to those obtained from the batchwise solution measurements.

A novel hydrazide Schiff base self-assembled nanoprobe for selective detection of human serum albumin and its applications in renal disease surveillance

Human serum albumin (HSA) is considered as a biomarker for the early diagnosis of renal disease, therefore identifying and detecting HSA in biological fluids (especially urine) with an easy method is of great importance. Herein, we report a novel hydrazide Schiff base fluorescent probe N'-((7-(diethylamino)-2-oxo-2H-chromen-3-yl)methylene)pyrazine-2-carbohydrazide (NPC), which self-assembled into nanoparticles in aqueous solution. Based on disassembly-induced emission and the site-specific recognition mechanism, the binding of NPC with HSA resulted in a fluorescence "turn-on" response. Probe NPC exhibited superior selectivity and sensitivity toward HSA with a detection limit of 0.59 mg L-1 in PBS and 0.56 mg L-1 in the urine sample. The site-binding mechanism of NPC with HSA was explored by fluorescence quenching study, Job's plot analysis, HSA destruction, site marker displacement and molecular docking. Fluorescence imaging of HSA in MCF-7 cells was achieved by using a non-toxic NPC probe, suggesting that NPC could be applied to visualize the level of HSA in vivo. More importantly, further practical applications of probe NPC in human urine samples were achieved with satisfactory results by using a fluorometer or test paper, which could provide extensive application in clinical diagnosis.

A dual-functional fluorescent probe for sequential determination of Cu2+/S2- and its applications in biological systems

A new acylhydrazine-derived Schiff base fluorescence probe DMI based on "ON-OFF-ON" fluorescence strategy was presented in this paper. Probe DMI could detect Cu²⁺ selectively and sensitively with dramatic fluorescence quenching in CH₃OH-PBS (v/v = 3:7) mixed solution. Once the complex DMI-Cu²⁺ interacted with S^2-, 10.67-folds fluorescence increase was induced via a displacement mechanism under the same experimental conditions. The corresponding detection limits for Cu²⁺ and S^2- were calculated to be 1.52 × 10^-8 M and 1.79 × 10^-8 M, respectively. The structures of DMI and DMI-Cu²⁺ were systematically characterized by Job's plot analysis, ESI-MS, IR, X-ray diffraction and density functional theory calculations. Furthermore, fluorescence imaging in MCF-7 cells and zebrafish demonstrated the probe DMI could act as a useful tool to monitor and track intracellular Cu²⁺ and S^2-, which was encouraged by remarkable fluorescence performance and low cytotoxicity. Importantly, the complex DMI-Cu²⁺ could be applied to detect corrupt blood samples, which could estimate the time of death.

A highly selective colorimetric and fluorescent probe for quantitative detection of Cu2+/Co2+: The unique ON-OFF-ON fluorimetric detection strategy and applications in living cells/zebrafish

Identifying and detecting similar target cations through combining "turn on" and "turn off" fluorescence mechanism is effective and challenging. Now a new colorimetric and ON-OFF-ON fluorescent probe N'-((7-(diethylamino)-2-oxo-2H-chromen-3-yl)methylene)-3-hydroxy-2-naphthohydrazide (L) was reported, which could detect Cu²⁺ and Co²⁺ in phosphate buffered CH₃CH₂OH-H₂O solvent system. With the assistance of glutathione and pH adjustment, a unique ON-OFF-ON fluorescence detection strategy could be achieved for distinguishing Cu²⁺ and Co²⁺. The emission of probe could recover from the L-Cu²⁺ and L-Co²⁺ system by addition of GSH or adjusting pH value to 4, respectively, which is due to the abolishment of paramagnetic Cu²⁺/Co²⁺. Based on fluorescence titration experiments, the limit of detection was determined as 3.84 × 10^-9 M and 4.55 × 10^-9 M for Cu²⁺ and Co²⁺, respectively. Meanwhile, the detection limit reached 6.21 × 10^-8 M for Cu²⁺ and 6.96 × 10^-8 M for Co²⁺ according to absorbance signal output. Fast recognition of Cu²⁺/Co²⁺ can be achieved by obvious color changes from green to colorless under UV light, as well as from yellow to orange-red in room light. The binding mode of L toward Cu²⁺ and Co²⁺ have been systematically studied by Job's plot analysis, ESI-MS, IR and density functional theory calculations. Most strikingly, further practical applications of the probe L in fluorescence imaging were investigated in MCF-7 cells and zebrafish due to its low cytotoxicity and good optical properties, suggesting that L could serve as a fluorescent sensor for tracking Cu²⁺ and Co²⁺in vivo.

Highly Selective and Sensitive Colorimetric and Fluorimetric Sensor for Cu2

A newly designed fluorescent and colorimetric probe was synthesized and selective detection of cu²⁺ was successful in aqueous medium. The design strategy exhibited strongly fluorescent when binding with cu²⁺ based on the change in structure between spirocyclic to a non-cyclic form of rhodamine based dye. The UV visible spectra of probe (6GS2) exhibited three absorption peaks at 229, 309 and 530 nm respectively. The emission spectra of fluorescent probe exhibited wavelength at 550 nm. The peak intensity increases during the addition of copper ion to probe through n-π transition. The probe characterized by different techniques like NMR, absorption, emission, mass and test strips methods. Graphical Abstract .

A dual-function fluorescent probe for Hg (II) and Cu (II) ions with two mutually independent sensing pathways and its logic gate behavior

A dual-function fluorescent Probe 1 has been synthesized conveniently by coupling rhodamine hydrazone with O-vinyl protected hydroxyl benzaldehyde. Probe 1 was a highly selective and sensitive chemodosimeter for Hg²⁺ through specific hydrolysis reaction of vinyl ethers with significant fluorescence quenching in CH₃CN-PBS buffer (3:7, v/v) solution. Meanwhile, Probe 1 showed a ratiometric fluorescent detection of Cu²⁺ with a remarkable large Stokes shift (150 nm) by the opening of the spirolactam ring in CH₃CN-PBS buffer (3:7, v/v) solution. Hence, the two recognition mechanisms realized well by using a single fluorescent probe. Moreover, Probe 1 could be efficiently applied to the combinatorial logic circuit of NOR and INHIBIT gates through the procured spectral results, respectively.

A coumarin-containing Schiff base fluorescent probe with AIE effect for the copper(ii) ion

A novel coumarin-derived Cu²⁺-selective Schiff base fluorescent “turn-off” chemosensor CTPE was successfully obtained, which showed an AIE effect. It could identify Cu²⁺ by quenching its fluorescence. The lower limit of detection was 0.36 μM. CTPE can act as a highly selective and sensitive fluorescence probe for detecting Cu²⁺.

A novel coumarin-derived Schiff base fluorescent “turn-off” chemosensor with AIE effect showed selectivity towards Cu²⁺. The recognition mechanism is presented.

A dual-responsive colorimetric probe for the detection of Cu2+ and Ni2+ species in real water samples and human serum

The monitoring of heavy transition metals has increasingly attracted great attention because they pollute the environment and have unique physiological functions. Chemosensors are useful tools for monitoring heavy transition metals due to their simple visualization, excellent sensitivity and high selectivity. Herein, we have developed a novel chemosensor for the detection of water-soluble Cu2+ and Ni2+ species with different mechanisms, and low detection limits of 2.1 nM for Cu2+ and 1.2 nM for Ni2+ were obtained. The colorimetric probe CPH has been applied to qualitative and quantitative detection of Cu2+ and Ni2+ species in real samples.

Highly Sensitive Dansyl-Based Chemosensor for Detection of Cu2+ in Aqueous Solution and Zebrafish

A new dansyl-based chemosensor (2-(4-((5-(dimethylamino)naphthalen-1-yl)sulfonyl)piperazin-1-yl)-N-(quinolin-8-yl)acetamide) (DC) for detecting Cu2+ was synthesized and characterized. DC showed great selectivity to Cu2+ by a fluorescent "on-off" detection method. Job plot, ESI-mass spectroscopy, and 1H NMR titration suggested a 1 to 1 binding mode between DC and Cu2+. The detection limit was determined to be 43 nM, which is greatly below the WHO guidelines. In addition, DC can be applied to real samples and zebrafish imaging. The fluorescence quenching mechanism was proposed as the enhancement of intramolecular charge transfer with calculations.

Coumarin–graphene turn-on fluorescent probe for femtomolar level detection of copper(ii)

A novel coumarin–graphene moiety was suggested as an excellent optical sensor for Cu²⁺ ions.

Two new quinoline-based regenerable fluorescent probes with AIE characteristics for selective recognition of Cu2+ in aqueous solution and test strips

Two novel highly selective quinoline-based fluorescent probes (1 and 2) with an aggregation induced emission (AIE) feature have been designed and synthesized for the rapid analysis of Cu2+ ions in aqueous media and on paper strips with a fluorescence quenching mechanism. Moreover, probes 1 and 2 exhibit excellent sensitivity and anti-interference for Cu2+ detection, and the detection limits are as low as 1.3 × 10-8 M and 8.5 × 10-8 M, respectively, which are much lower than the allowable standard of Cu2+ (∼20 μM) in drinking water (EPA). More importantly, these two probes were successfully applied for the determination of Cu2+ in real aqueous samples and fabrication of simple device test strips for rapid and on-site detection of Cu2+ ions. Interestingly, they can also be regenerated by adding an excess of S2-. Additionally, the crystallographic structure of probe 1 was confirmed through a single crystal X-ray study. Job's plot analysis and ESI-MS spectroscopic studies reflect the 1 : 1 complexation of the 1-Cu2+ and 2-Cu2+ complexes. Furthermore, DFT/TDDFT calculations were performed in order to help in understanding the electronic properties of the complexes and the chelation-induced quenching mechanism.

A new high selective and sensitive turn-on fluorescent and ratiometric absorption chemosensor for Cu2+ based on benzimidazole in aqueous solution and its application in live cell

A new benzimidazole base turn-on fluorescent and ratiometric absorption chemosensor (L) bearing bidentate ligand for detection of Cu²⁺ was designed and synthesized. Fluorescence and UV-vis spectra studies demonstrated that L can detect Cu²⁺ ions in aqueous solution using fluorescence enhancement and ratiometric absorption sensing over a wide pH range. Both fluorescent and ratiometric absorption sensing of L for Cu²⁺ possessed high selectivity and sensitivity over other competitive metal ions and had low detection limit. Job's plot, mass spectra and DFT calculation indicated the sensing mechanism is the complex formation between L and Cu²⁺ with 1:2 stoichiometry. Fluorescence images of HepG2 in the absence and presence of Cu²⁺ displayed L had cell permeability and detection ability for Cu²⁺ in live cells.