High selective and sensitive detection of Zn(II) using tetrapeptide-based dansyl fluorescent chemosensor and its application in cell imaging

Benzil Bis-Hydrazone Based Fluorescence 'Turn-on' Sensor for Highly Sensitive and Selective Detection of Zn(II) Ions

In this study, a novel Benzil Bis-Hydrazone (BBH) sensor with two C = N-N = C moieties was designed and synthesized based on the condensation reaction between benzil-dihydrazone (b) and cinnamaldehyde. The BBH probe in dimethylsulfoxide showed extremely weak fluorescence. However, the same solution exhibited an intensive fluorescence enhancement (152-fold) with the introduction of Zn(II) ions. In contrast, no or negligible fluorescence changes were observed when other ions were added. The fluorogenic behavior of BBH towards the examined cations indicated an excellent selectivity of the BBH sensor for Zn(II) cations without any interference from other cations like Fe(II), Mg(II), Cu(II), Co(II), Mn(II), Cr(III), Hg(II), Sn(II), Al(I), La(III), Ca(II), Ba(II), Na(I), K(I), and especially Cd(II). Moreover, the UV-vis spectrophotometric titrations revealed that a 1:1 stoichiometric complex BBH-Zn(II) was formed during the Zn(II) sensing and the binding constant value for this complex was calculated to be equal to 106.8. Further, in order to show the affinity of the BBH sensor for Zn(II) cations, it was deemed necessary to determine the limit of detection (LOD) which was found to equal to 2.5 10-4 M.

A bifunctional peptide-based fluorescent probe for ratiometric and "turn-on" detection of Zn(II) ions and its application in living cells

In this work, a bifunctional peptide-based fluorescent probe L containing a tetrapeptide scaffold (Pro-Gly-His-Trp-NH₂) and a dansyl group was synthesized using solid phase peptide synthesis (SPPS) technology. As designed, L, based on a FRET mechanism, exhibited high selectivity, excellent ratiometric signals, and fast response to Zn²⁺ in aqueous solutions at an excitation wavelength of 280 nm. In addition, when excited at 320 nm, L exhibited a fluorescent "turn-on" response towards Zn²⁺ based on PET mechanism. More importantly, the stoichiometry of L and Zn²⁺ was determined to be 2:1 by fluorescent titration, Job's plot method, and ESI-MS spectrometry. The association constant for Zn²⁺ ions was determined to be 6.26 × 10⁸ M^-2, while the limit of detection (LOD) of L was estimated as 5.43 nM, which is a much lower value than WHO and EPA guidelines for drinking water. Moreover, L was successfully applied to detect both Zn²⁺ and Cu²⁺ in living cells due to good biocompatibility and excellent low toxicity.

Synthesis of Dansyl Cyclen and Preliminary Study of Its Fluorescent Properties

The synthesis of a dansyl cyclen-based compound as a potential chemical sensor has been carried out. The initial study of its fluorescent properties has also been conducted. This study aims to synthesize a cyclen-based compound comprising three identical pendant arms and another different arm carrying a dansyl fluorophore. Producing these heterogenous pendant arms, a-three pendant arm cyclen 9 was reacted with dansyl aziridine 10. The synthesis products were characterized using 1H NMR, 13C NMR, IR, and elemental analysis. In addition, a Fluorescent Spectrophotometer has been used to assess the fluorescent intensity changes of the synthetic ligand in a range of pH 2–13 and when it was titrated with some metal ions. Based on the results of characterization with 13C NMR for compound 2 and additional characterization with IR and elemental analysis for its hydrochloric form 11, it is wisely said that the proposed compound has been successfully synthesized, giving 66% yield as viscous brown oil 2. Moreover, the fluorescent property showed that the higher the pH employed, the higher the fluorescent intensity observed. Meanwhile, the addition of some cationic metals revealed that cadmium (II) gave the highest increase in the fluorescent intensities among other cationic metals.

Importance of BODIPY-based Chemosensors for Cations and Anions in Bio-imaging Applications

Background:

Chemosensor compounds are useful for sensitive selective detection of cations and anions with fluorophore groups in an attempt to develop the effective selectivity of the sensors. Although familiar fluorescent sensors utilizing inter-molecular interactions with the cations and anions, an extraordinary endeavor was executed the preparation of fluorescent-based sensor compounds. 4,4-difluoro-4- bora-3a,4a-diaza-s-indacene (Bodipy) and its derivatives were firstly used as an agent in the imaging of biomolecules due to their interesting structures, complexation, and fluorogenic properties. Among the fluorescent chemosensors used for cations and anions, Bodipy-based probes stand out owing to the excellent properties such as sharp emission profile, high stability, etc. In this review, we emphasize the Bodipy-based chemosensor compounds, which have been used to image cations and anions in living cells, because of as well as the biocompatibility and spectroscopic properties.

Methods:

Research and online content related to chemosensor online activity is reviewed. The advances, sensing mechanisms and design strategies of the fluorophore exploiting selective detection of some cation and anions with Bodipy-based chemosensors are explained. It could be claimed that the using of Bodipy-based chemosensors is very important for cations and anions in bio-imaging applications.

Results:

Molecular sensors or chemosensors are molecules that show a change can be detected when affected by the analyte. They are capable of producing a measurable signal when they are selective for a particular molecule. Molecular and ion recognition that it is important in biological systems such as enzymes, genes, environment, and chemical fields. Due to the toxic properties of many heavy metal ions, it is of great importance to identify these metals due to their harmful effects on living metabolism and the pollution they create in the environment. This process can be performed with analytical methods based on atomic absorption and emission. The fluorescence methods among chemosensor systems have many advantages such as sensitivity, selectivity, low price, simplicity of using the instrument and direct determination in solutions. The fluorescence studies can be applied at nanomolar concentrations.

Conclusion:

During a few decades, a lot of Bodipy-based chemosensors for the detection of cations & anions have been investigated in bio-imaging applications. For the Bodipy-based fluorescent chemosensors, the Bodipy derivatives were prepared by different ligand groups for the illumination of the photophysical and photochemical properties. The synthesized Bodipy-based chemosensors have remarkable photophysical properties, such as a high quantum yield, strong molar absorption coefficient etc. Moreover, these chemosensors were successfully implemented on living organisms for the detection of analytes.

A novel peptide-based fluorescent probe with a large stokes shift for rapid and sequential detection of Cu2+ and CN- in aqueous systems and live cells

A novel fluorescent probe (DSD) was reasonably designed and synthesized with dansyl-labeled dipeptide (Dan-Ser-Asp-NH₂). DSD featured remarkably large Stokes shift (230 nm) and perfect water solubility, and exhibited high selectivity and rapid recognition toward Cu²⁺via fluorescence quenching. The detection limit of DSD for Cu²⁺ was 2.4 nM, indicated that DSD has excellent sensitivity. In addition, the stoichiometry between DSD and Cu²⁺ were detected as 1:1 by fluorescence titration, Job's plot and ESI-HRMS data. As designed, DSD-Cu²⁺ system was able to sequentially detect CN^- according to the displacement approach with fluorescence "off-on" response, and the detection limit for CN^- was calculated to be 41.9 nM. Specifically, the response time of DSD with Cu²⁺ and CN^- was less than 40 s, which rendered it suitable for real time detection in actual water samples. In addition, with the alternate addition of Cu²⁺ and CN^-, the reversible cycles could be repeated for at least 10 times, indicated that DSD was a promising reversibility probe. DSD showed low toxicity and good biocompatibility, and was successfully applied to detect Cu²⁺ and CN^- in living cells.

A highly selective and sensitive Zn2+ fluorescent sensor based on zinc finger-like peptide and its application in cell imaging

Developing new chemosensors for detection of Zn²⁺ has attracted great attentions because of the important roles of Zn²⁺ in biological systems, and it will produce toxic effects with an excessive intake of zinc ion. Metalloproteins are often used as an effective template for the design and development of peptide-based fluorescent sensors. In this study, we designed a new and simple ratiometric fluorescent sensor for Zn²⁺, which was based on a zinc finger-like peptide and labeled with a dansyl group, i.e., Dansyl-His-Gln-Arg-Thr-His-Trp-NH₂ (D-P6), by using solid phase peptide synthesis (SPPS). The dimeric peptide has a high affinity for Zn²⁺ overothermetalions, as indicated by spectroscopic studies, as well as molecular modeling. Remarkably, the sensor exhibited a highly selective and sensitive ratiometric fluorescent response to Zn²⁺ by fluorescent resonance energy transfer effect between tryptophan residue and fluorophore dansyl group, with a very low detection limit of 33 nM in aqueous solution. Furthermore, the sensor displayed a very low biotoxicity, which allows successful detection of Zn²⁺ in living HeLa cells. We believe that the new sensor may have potential applications in biological science.

A dansyl-based fluorescent probe for sensing Cu2+ in aqueous solution

A fluorescent probe based on a glycyl-L-tyrosine-modified dansyl derivative (D-GT) is designed and synthesized. D-GT demonstrated great detection performance toward Cu²⁺ in an aqueous solution. Fluorescence quenching occurred due to the coordination of Cu²⁺ with D-GT. The sensitive detection of D-GT to Cu²⁺ was applied in aqueous solution within a wide pH span (6-12). A 1:1 coordinate stoichiometric way and an association constant of 6.47 × 10⁴ M^-1 between D-GT and Cu²⁺ were determined. The measured detection limit for Cu²⁺ in HEPES buffer solution (10 mM, pH 7.4) was 0.69 μM. The probe displayed an appropriate sensitivity toward Cu²⁺ in real drinking water samples and living cells, which reveals the potential applications of D-GT in complicated environments.

Ultrasensitive mercury ion and biothiol detection based on Dansyl-His-Pro-Gly-Asp-NH2 fluorescent sensor

Mercury is an environmental contaminant, which is highly toxic even at extremely low concentrations. Long-term accumulation of mercury in human body will damage the central nervous system or digestive tract system. Here, a new fluorescent chemical sensor Dansyl-His-Pro-Gly-Asp-NH₂ (D-P4) was synthesized for the determination of Hg²⁺. The D-P4 sensor exhibits excellent selectivity and sensitivity to Hg²⁺ in aqueous solution with a 'turn-off' fluorescence response. Furthermore, D-P4-Hg system displays a good 'turn-on' fluorescence response to biothiols. The calculated binding constant for the 1:1 complex of D-P4 with Hg^{2 +} is 1.07 × 10⁵ M^-1, which also confirms the high affinity of D-P4 for Hg²⁺. Results indicate that the detection limit of D-P4 for Hg²⁺ is 61.0 nM, and that of D-P4-Hg system for Cys is as low as 80.0 nM.

Thermally Stable Fluorogenic Zn(II) Sensor Based on a Bis(benzimidazole)pyridine-Linked Phenyl-Silsesquioxane Polymer

A 2,6-bis(2-benzimidazolyl) pyridine-linked silsesquioxane-based semi-branched polymer was synthesized, and its photophysical and metal-sensing properties have been investigated. The polymer is thermally stable up to 285 °C and emits blue in both solid and solution state. The emission of the polymer is sensitive to pH and is gradually decreased and quenched upon protonation of the linkers. The initial emission color is recoverable upon deprotonation with triethylamine. The polymer also shows unique spectroscopic properties in both absorption and emission upon long-term UV irradiation, with red-shifted absorption and emission not present in a simple blended system of phenylsilsesquioxane and linker, suggesting that a long-lived energy transfer or charge separated state is present. In addition, the polymer acts as a fluorescence shift sensor for Zn(II) ions, with red shifts observed from 464 to 528 nm, and reversible binding by the introduction of a competitive ligand such as tetrahydrofuran. The ion sensing mechanism can differentiate Zn(II) from Cd(II) by fluorescence color shifts, which is unique because they are in the same group of the periodic table and possess similar chemical properties. Finally, the polymer system embedded in a paper strip acts as a fluorescent chemosensor for Zn(II) ions in solution, showing its potential as a solid phase ion extractor.

A Highly Selective and Sensitive Peptide-Based Fluorescent Ratio Sensor for Ag. J Fluoresc 2020;31:237-246. [PMID: 33215317 DOI: 10.1007/s10895-020-02653-5]

A fluorescence ratio sensor based on dansyl-peptide, Dansyl-Glu-Cys-Glu-Glu-Trp-NH₂ (D-P5), was efficiently synthesized by Fmoc solid phase peptide synthesis. The sensor exhibits high selectivity and sensitivity for Ag⁺ over 16 metal ions in 100 mM sodium perchlorate and 50 mM 2-[4-(2-hydroxyethyl)piperazin-1-yl]ethanesulfonic acid buffer solution by fluorescence resonance energy transfer. The 1:1 binding stoichiometry of the sensor and Ag⁺ is measured by fluorescence ratio response and the job's plot. The dissociation constant of the sensor with Ag⁺ was calculated to be 6.4 × 10^-9 M, which indicates that the sensor has an effective binding affinity for Ag⁺. In addition, the limit of detection of the sensor for Ag⁺ was determined to be 80 nM, which also indicates that the sensor has a high sensitivity to Ag⁺. Result showed that the sensor is an excellent Ag⁺ sensor under neutral condition. Furthermore, this sensor displays good practicality for Ag⁺ detection in river water samples without performing tedious sample pretreatment, as well as for silver chloride detection.

A novel peptide-based fluorescent probe for sensitive detection of zinc (II) and its applicability in live cell imaging

In this work, we report SPSS synthesis of a new peptide-based fluorescent probe (L) capable of detecting Zn²⁺ with little interference in 100% aqueous solutions at physiological pH. Furthermore, L showed excellent sensitivity, with a detection limit of 26.77 nM. The 2:1 binding ratio between L and Zn²⁺ was determined using fluorometric titration, Job's plot and ESI-MS analyses. The "off-on-off" type fluorescence change of L was demonstrated by alternately adding Zn²⁺ and EDTA based on a formation-separation process of the complex, indicating that L could serve as a reversible probe. Moreover, MTT studies demonstrated that L has low biotoxicity, and could be successfully used for detection of Zn²⁺ and EDTA in live cells.

Highly sensitive turn-on detection of mercury(II) in aqueous solutions and live cells with a chemosensor based on tyrosine

Herein, we reported a novel fluorescent chemosensor (DY) based on dansyl group and tyrosine by solid phase peptide synthesis (SPPS) for the detection of mercury(II) ions with excellent selectivity among 17 different metal ions. As designed, DY exhibited a sensitive fluorescence "turn-on" response to Hg²⁺ with low detection limits of 22.65 nM. A stoichiometric ratio (2: 1) of chemosensor DY and Hg²⁺ ions was determined by a Job's plot, fluorescent titration and the ESI-MS spectra. Especially, the reversible of DY-Hg with EDTA establishes the reuse of DY, and the circulation effect was very good. Furthermore, the wide pH range of 6-10 makes it capable of application in biological systems. Moreover, DY has been successfully applied to the detection of Hg²⁺ ions and EDTA in living HeLa and HK2 cells based on low cytotoxicity and good membrane permeability.

Colorimetric and fluorescence sensing of Zn2+ ion and its bio-imaging applications based on macrocyclic "tet a" derivative

We report on the synthesis and characterization of trans N, N'-di-substituted macrocyclic "tet a" probe (L) for metal ion sensing. Both the colorimetric and fluorescent titration studies are performed with different metal ions. The results have suggested that the probe L is very selective and sensitive towards Zn²⁺ ions with significant changes in color. The pendant armed macrocyclic "tet a" probe has exhibited 1.28× 10⁵ M^-1 binding constant and virtuous selectivity for Zn²⁺ ion than other common metal ions. The detection limit of the probe towards Zn²⁺ ion is 0.027 nM. The selective sensing of Zn²⁺ ion is efficiently reversible with EDTA, which is demonstrated for five cycles without losing sensitivity. The time-resolved single-photon counting (TCSPC) studies have determined the average lifetime value for the probe L and L+ Zn²⁺ ion of 1.29 and 2.96 ns, respectively. The theoretical DFT studies have well supported the experimental outcomes. The practical application of the probe in visualizing intracellular Zn²⁺ ion distribution in live Artemia salina has proved the low cytotoxicity and cell membrane permeability of probe, which makes it capable of sensing Zn²⁺ ion in HeLa cells. Thus, the probe L can act as a selective recognition of Zn²⁺ ion in living cell applications.

A novel fluorescent chemosensor for detection of mercury(II) ions based on dansyl-peptide and its application in real water samples and living LNcap cells

Mercury is one of the most hazardous pollutants, and mercury pollution is a serious hazard to our environment. Herein, we designed and synthesized a new peptide-based fluorescent chemosensor (L) based on a Fmoc-Lys (Fmoc)-OH backbone conjugated with two Serines and dansyl groups using solid phase peptide synthesis (SPPS) technology. L exhibited highly selective and excellent sensitive detection of Hg²⁺ ions in 100% aqueous solutions through fluorescence quenching. The chemosensor L forms a 2:1 stoichiometry with high binding constants (4.89×10⁶M^-1) and the detection limit for Hg²⁺ ions of the proposed assay was 7.59nM. In addition, the recovery test results of Hg²⁺ concentration in actual water samples showed that the quantitative detection of Hg²⁺ ions can be realized in two water samples. Moreover, L showed low cytotoxicity and excellent membrane permeability in HK2 cells, which has been successfully applied for monitoring Hg²⁺ ions in living LNCaP cells.

A water-soluble peptide fluorescent chemosensor for detection of cadmium (II) and copper (II) by two different response modes and its application in living LNcap cells

A novel peptide-based fluorescent chemosensor (DGC) based on dansyl-appended dipeptide (Gly-Cys-NH₂) was synthesized using SPPS technology. DGC exhibited highly sensitive detection of Cadmium (II) ions in 100% aqueous solutions through fluorescent "turn on" response and the detection limits of 14.5 nM. On the other hand, the fluorescence of DGC was almost completely quenched with fast response time when the addition of Cu²⁺ ions to DGC solutions, the detection limits for Cu²⁺ was 26.3 nM. In addition, the 2:1 binding stoichiometry of DGC with Cd²⁺ and Cu²⁺ were confirmed by Job's plot, fluorescent titration and HR-MS data. More importantly, MTT assays and fluorescence imaging experiments suggested that DGC has outstanding membrane permeability and hypotoxicity, and could be an efficient fluorescent chemosensor for Cd²⁺ and Cu²⁺ detection by two different response modes in living LNcap cells.

A selective “turn-on” sensor for recognizing In3+ and Zn2+ in respective systems based on imidazo[2,1-b]thiazole

An imidazo[2,1-b]thiazole-based compound (X) was designed and synthesized as an “off–on–off” sensor for the multiple recognition of In³⁺ and Zn²⁺ in different systems.

A novel fluorescent chemosensor for detection of Zn(II) ions based on dansyl-appended dipeptide in two different living cells

This paper describes a new fluorescent chemosensor (DSH) based on dipeptide conjugated with dansyl group, which was synthesized by solid phase peptide synthesis (SPPS) technology. DSH exhibited a highly selective and sensitive toward Zn²⁺ ions by "turn-on" response based on generation of monomer-excimer mechanism in aqueous solutions, and the detection limit was calculated at 11.2 nM. In addition, the reversible of DSH-Zn with Na₂EDTA establishes the reuse of DSH, and the circulation effect was very good. Moreover, DSH had good water solubility, and was successfully applied to bioimage intracellular Zn²⁺ ions and Na₂EDTA in two different living cells with exciting cellular permeability and low cytotoxicity, which indicated that DSH had great potential in the application of biological imaging.

Highly Sensitive Dansyl-Based Chemosensor for Detection of Cu2+ in Aqueous Solution and Zebrafish

A new dansyl-based chemosensor (2-(4-((5-(dimethylamino)naphthalen-1-yl)sulfonyl)piperazin-1-yl)-N-(quinolin-8-yl)acetamide) (DC) for detecting Cu2+ was synthesized and characterized. DC showed great selectivity to Cu2+ by a fluorescent "on-off" detection method. Job plot, ESI-mass spectroscopy, and 1H NMR titration suggested a 1 to 1 binding mode between DC and Cu2+. The detection limit was determined to be 43 nM, which is greatly below the WHO guidelines. In addition, DC can be applied to real samples and zebrafish imaging. The fluorescence quenching mechanism was proposed as the enhancement of intramolecular charge transfer with calculations.

A sequential and reversibility fluorescent pentapeptide probe for Cu(II) ions and hydrogen sulfide detections and its application in two different living cells imaging

In this study, we report a sequential and reversibility fluorescent probe (DP5) based on pentapeptide conjugated with dansyl groups using the solid phase peptide synthesis (SPPS) technology. DP5 showed immediate "turn off" response toward Cu²⁺ ions at an excitation wavelength of 330 nm with detection limits of 23.5 nM. The 2:1 binding ratio between DP5 and Cu²⁺ were confirmed using Job's plot method and fluorescence titration study, and DP5-Cu complex was observed with an association constant of 6.76 × 10⁸ M^-2. As designed, DP5-Cu complex as a promising analytical probe exhibited highly selective for H₂S detection in aqueous solutions. The detection limit for H₂S was obtained to be 17.2 nM, and lower than EPA and WHO guidelines. In addition, the reversibility and cyclicity were imparted to the DP5 during the detection of Cu²⁺ and H₂S, and cycle effect is very good. Furthermore, DP5 displayed better biocompatibility and low biotoxicity, and sequential fluorescence "on-off-on" responses of DP5 to Cu²⁺ and H₂S were successfully applied in two different living cells.

A novel peptide-based fluorescent chemosensor for Cd(II) ions and its applications in bioimaging

Nowadays, it is of great significance to develop a novel fluorescent chemosensor for Cd(II) ions detection with cost-effective, rapid, facile and applicable to environment and biological milieus. Herein, we report a new peptide-based fluorescent chemosensor DSC (Dan-Ser-Cys-NH₂) based on dipeptide (Ser-Cys-NH₂) conjugated with dansyl group, which was synthesized using solid phase peptide synthesis (SPPS) technology. As designed, DSC exhibited fluorescent "turn-on" response for Cd²⁺ in 100% aqueous solution over a wide range of pH values based on photoinduced electron transfer (PET). The stoichiometry binding of DSC and Cd²⁺ was determined to be 2:1 by Job's plot and ESI-MS analysis. Furthermore, DSC showed highly sensitive for Cd²⁺ and a low detection limit of 13.8 nM. What's more, DSC has cell permeability and low cytotoxicity, and fluorescence imaging experiments demonstrated that DSC was capable of monitoring Cd²⁺ in living HK2 cells by confocal microscopy.

Highly selective and sensitive detection of Zn(II) and Cu(II) ions using a novel peptide fluorescent probe by two different mechanisms and its application in live cell imaging

Metalloproteins are often a useful template for the design and development of peptide fluorescent probes. Herein, we report a novel and simple fluorescent probe L comprised of tetrapeptide and dansyl groups by the solid phase peptide synthesis (SPPS). As a multifunctional analytical probe, L exhibited a highly selective "turn-on" fluorescent response to zinc ions, and a selective "turn-off" fluorescent response to copper ions at an excitation wavelength of 330 nm. The high sensitivity of L was made possible photo-induced electron transfer (PET), and L exhibited very low detection limits for Zn²⁺ and Cu²⁺ of 4.9 nM and 15 nM in 100% aqueous solutions, respectively. Furthermore, L displayed very low biotoxicity and excellent cell permeability, and was successfully used for detection of Zn²⁺ and Cu²⁺ in living HeLa cells based on two different mechanisms. We believe that the probe L may have many potential applications in environmental and biological research.

A fluorescent dansyl-based peptide probe for highly selective and sensitive detect Cd2+ ions and its application in living cell imaging

We reported a novel and readily synthesized fluorescent "turn-on" probe L (Dansyl-Glu-Pro-Gly-Cys) based on dansyl group combine tetrapeptide. The probe L exhibited highly sensitive fluorescent recognition to Cd²⁺ ions in HEPES buffer solutions (10.0 mM, pH 7.4). The 2:1 binding stoichiometry of L with Cd²⁺ were determined based on fluorescence titration and the Job's plot investigation. The competitive experiments were found to be highly selective for the Cd²⁺ ions even in the existence of excess competing metal ions including Zn²⁺, Pb²⁺, Hg²⁺ and Cu²⁺ ions. The binding constant of the complex L-Cd was calculated to be 5.18 × 10¹⁰ M^-2, and showed great affinity compared to other probes. In addition, the detection limit of the probe L for Cd²⁺ ions was calculated to be 45 nM, which presented a pronounced sensitivity toward Cd²⁺ ions. Most importantly, the probe L had wide range of pH and good biocompatibility, and were successfully applied to selectively detected Cd²⁺ ions within pH range of 7-12 and bioimaging studies in live cells.