A luminescence nanosensor for Ornidazole detection using graphene quantum dots entrapped in silica molecular imprinted polymer

Synthesis of polymer dots as fluorescent nanoprobe for the detection of Ponceau 4R, an additive color abuse in food

Abusing organic dyes in industrial food products is an important issue in many countries. Rapid chemical sensing of these compounds can be of great importance during the industrial life of humans. In this work, we synthesized a new fluorescent polymer dot and successfully applied it as an optical probe for the detection of red color abuse in foodstuffs. Ponceau 4R is a red organic dye additive that is used in some foodstuffs such as tomato sauces or pastes. It is too hazardous to human health. Detection of such abusage is challenging. The development of π-conjugated polymer dots having a bright emission band at visible can be a promising probe for the detection of food color additives. A variety of methods and monomers were previously used for their synthesis. Here, the Suzuki Coupling method was employed. The limit of detection (LOD) of the method was obtained 16 nmol L-1 for the detection of Ponceau 4R.

Sulfur and nitrogen co-doped carbon quantum dots as fluorescent probes for the determination of some pharmaceutically-important nitro compounds

In this study, highly fluorescent sulfur and nitrogen co-doped carbon quantum dots (SN-CQDs) were synthesized by a simple one-pot hydrothermal method using thiosemicarbazide and citric acid as starting materials. Various spectroscopic and microscopic techniques were applied to characterize the prepared SN-CQDs. The synthesized SN-CQDs' maximum fluorescence emission was obtained at 430 nm after excitation at 360 nm. Rifampicin (RFP), tinidazole (TNZ), ornidazole (ONZ), and metronidazole (MNZ) all quantitatively and selectively quenched the SN-CQDs' native fluorescence, which was the base-for their-spectrofluorimetric estimation without the need for any tedious pre-treatment steps or high-cost instrumentation. SN-CQDs demonstrated a "turn-off" fluorescence response to RFP, TNZ, ONZ, and MNZ over the ranges of 1.0-30.0, 10.0-200.0, 6.0-200.0, and 5.0-100.0 μM with detection limits of 0.31, 1.76, 0.57, and 0.75 μM and quantitation limits of 0.93, 5.32, 1.74, and 2.28 μM respectively. The suggested method was successfully used to determine the investigated drugs in their commercial dosage forms. The method was further extended to their determination in spiked human plasma samples, with satisfactory mean % recoveries (99.44-100.29) and low % RSD values (< 4.52). The mechanism of fluorescence quenching was studied and discussed. The suggested method was validated in accordance with ICH recommendations.

A Fusion of Molecular Imprinting Technology and Siloxane Chemistry: A Way to Advanced Hybrid Nanomaterials

Molecular imprinting technology is a well-known strategy to synthesize materials with a predetermined specificity. For fifty years, the "classical" approach assumed the creation of "memory sites" in the organic polymer matrix by a template molecule that interacts with the functional monomer prior to the polymerization and template removal. However, the phenomenon of a material's "memory" provided by the "footprint" of the chemical entity was first observed on silica-based materials nearly a century ago. Through the years, molecular imprinting technology has attracted the attention of many scientists. Different forms of molecularly imprinted materials, even on the nanoscale, were elaborated, predominantly using organic polymers to induce the "memory". This field has expanded quickly in recent years, providing versatile tools for the separation or detection of numerous chemical compounds or even macromolecules. In this review, we would like to emphasize the role of the molecular imprinting process in the formation of highly specific siloxane-based nanomaterials. The distinct chemistry of siloxanes provides an opportunity for the facile functionalization of the surfaces of nanomaterials, enabling us to introduce additional properties and providing a way for vast applications such as detectors or separators. It also allows for catalyzing chemical reactions providing microreactors to facilitate organic synthesis. Finally, it determines the properties of siloxanes such as biocompatibility, which opens the way to applications in drug delivery and nanomedicine. Thus, a brief outlook on the chemistry of siloxanes prior to the discussion of the current state of the art of siloxane-based imprinted nanomaterials will be provided. Those aspects will be presented in the context of practical applications in various areas of chemistry and medicine. Finally, a brief outlook of future perspectives for the field will be pointed out.

Green synthesis, characterization, and antimicrobial applications of silver nanoparticles as fluorescent nanoprobes for the spectrofluorimetric determination of ornidazole and miconazole

A green and simple method was proposed for the synthesis of silver nanoparticles (Ag-NPs) using Piper cubeba seed extract as a reducing agent for the first time. The prepared Ag-NPs were characterized using different spectroscopic and microscopic techniques. The obtained Ag-NPs showed an emission band at 320 nm when excited at 280 nm and exhibited strong green fluorescence under UV-light. The produced Ag-NPs were used as fluorescent nanosensors for the spectrofluorimetric determination of ornidazole (ONZ) and miconazole nitrate (MIZ) based on their quantitative quenching of Ag-NPs native fluorescence. The current study introduces the first spectrofluorimetric method for the determination of the studied drugs using Ag-NPs without the need for any pre-derivatization steps. Since the studied drugs don't exhibit native fluorescent properties, the importance of the proposed study is magnified. The proposed method displayed a linear relationship between the fluorescence quenching and the concentrations of the studied drugs over the range of 5.0-80.0 µM and 20.0-100.0 µM with limits of detection (LOD) of 0.35 µM and 1.43 µM for ONZ and MIZ, respectively. The proposed method was applied for the determination of ONZ and MIZ in different dosage forms and human plasma samples with high % recoveries and low % RSD values. The developed method was validated according to ICH guidelines. Moreover, the synthesized Ag-NPs demonstrated significant antimicrobial activities against three different bacterial strains and one candida species. Therefore, the proposed method may hold potential applications in the antimicrobial therapy and related mechanism research.

Molecularly Imprinted Polymers (MIPs) in Sensors for Environmental and Biomedical Applications: A Review

Molecular imprinted polymers are custom made materials with specific recognition sites for a target molecule. Their specificity and the variety of materials and physical shapes in which they can be fabricated make them ideal components for sensing platforms. Despite their excellent properties, MIP-based sensors have rarely left the academic laboratory environment. This work presents a comprehensive review of recent reports in the environmental and biomedical fields, with a focus on electrochemical and optical signaling mechanisms. The discussion aims to identify knowledge gaps that hinder the translation of MIP-based technology from research laboratories to commercialization.

In-situ preparation of CuO nanoparticles decorated In2O3 pn heterojunction composite for the photoelectrochemical detection of ornidazole

The eco-friendly synthesis of metal oxides pn junction composite with high visible light absorption and its photoelectrochemical monitoring on antibiotics is reported. The In2O3-CuO pn heterojunction composite was successfully prepared by in-situ hydrothermal decoration of CuO on the prepared In2O3 using a simple reflux method. The obtained nanorods like In2O3-CuO pn heterojunction exhibited high conductivity with excellent stability for the facilitated photoelectrochemical detection of ornidazole (ONZ) that plays a role in aquatic toxicology. The photo-stability and optical characteristics of the In2O3-CuO heterojunction composite were analyzed through photocurrent and UV-visible studies. Mechanism of ONZ signaling has been proposed with appropriate band levels derived by Mott-Schottky analysis. An optimized In2O3-CuO heterojunction detects ONZ in the range 0.05-65.3 nM with 0.0092 nM as the limit of detection at - 0.45 V (vs. Ag/AgCl) working potential. The practical applicability of the sensor device was tested in chicken meat, human urine, and lake water samples containing ONZ. The recoveries of real samples were above 95% and results obtained were compared with electrochemical methods.

A novel carbon dot/polyacrylamide composite hydrogel film for reversible detection of the antibacterial drug ornidazole

A carbon dot/polyacrylamide (CDs/PAM) composite hydrogel film with stable fluorescence performance was fabricated by merging a hydrogel film and carbon dots (CDs) with blue fluorescence, which were prepared by hydrothermal synthesis using anhydrous citric acid and acrylamide as carbon sources. The obtained CDs/PAM composite hydrogel film exhibited a good fluorescence quenching effect on ornidazole (ONZ), and can be used for the quantitative detection of ONZ. In the ONZ concentration range of 5-60 μM, a good linear relationship between the fluorescence quenching efficiency of the CDs/PAM composite hydrogel film and the concentration of ONZ solution was obtained with a low detection limit of 2.35 μM. In addition, the detection system has good selectivity and strong anti-interference capacity, and can be used in repeated cycles for detection.

A novel hybrid construction of MnMoO4 nanorods anchored graphene nanosheets; an efficient electrocatalyst for the picomolar detection of ecological pollutant ornidazole in water and urine samples

Nitroimidazole compounds are widely used antibiotics to encounter anaerobic bacterial and parasitic infections. The wide usage of antibiotic drugs became an ecological contaminant which in turn into potential monitoring. In this regards, we have designed and developed a new electrochemical sensing probe to monitor an antiprotozoal drug, ornidazole (ODZ), with the aid of a glassy carbon electrode (GCE) integrated with manganese molybdate nanorods (MnMoO4) decorated graphene nanosheets (GNS) hybrid materials that prepared by feasible probe sonochemical method (parameters: 2-4 W, 5 mV amp, 20 kHz). The electrochemical investigations of the developed probe were performed by using rapid scan electrochemical workstations namely cyclic voltammetry (CV) and amperometric (i-t) techniques. The as-prepared MnMoO4/GNS nanocomposite was characterized and its purity of nanocomposite formation was confirmed by various analytical techniques like X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and Raman spectroscopy. In addition to that, the textural morphology of the MnMoO4/GNS nanocomposite was examined with the aid of field emission scanning electron microscopy (FE-SEM) and high-resolution transmission electron microscopy (HR-TEM). The MnMoO4/GNS nanocomposite rotating disk glassy carbon electrode (RDGCE) plays a crucial role in electrochemical detection of ODZ, which results in excellent anti-interference ability, a lower detection limit of 845 pM, massive linear ranges from 10 to 770 nM, and good sensitivity of about 104.62 μA μM-1 cm-2. From the acquired electrochemical studies, we have developed a disposable electrochemical sensor probe using a low-cost screen-printed carbon electrode (SPCE) with MnMoO4/GNS nanocomposite. The MnMoO4/GNS/SPCE are capably employed in real-time sensing of ODZ in water and urine samples. These electrochemical studies revealed the integral new vision on the electrocatalytic performance of the modified SPCE and also shown excellent amplification results in ultra-trace levels.

Detection of tartrazine in fake saffron containing products by a sensitive optical nanosensor

A fluorescent assay for the selective analysis of tartrazine was developed. Tartrazine is a health-threatening food additive commonly used as fake saffron. An optical nanosensor was fabricated based on molecular imprinting technique in which carbon dots (CDs) as fluorophores and tartrazine as a template molecule were embedded in molecularly imprinted polymer (MIP) matrix. The synthesized CDs embedded in MIP (CDs-MIP) was characterized by various methods. The fluorescence intensity of (CDs-MIP) was selectively quenched in the presence of tartrazine in comparison with other similar food color additives. The correlation between the quenching of CD-MIP and the concentration of tartrazine was used as an optical sensing for rapid detection of tartrazine in the range of 3.3-20.0 nM (1.8-10.7 μg L^-1) with detection limit of 1.3 nM (0.70 μg L^-1). Eventually, the designed nanosensor was successfully applied for tartrazine detection in foodstuffs such as fake saffron, saffron tea and saffron ice cream samples.

Development of an electrochemical sensor based on a cobalt oxide/tin oxide composite for determination of antibiotic drug ornidazole

A schematic illustration of the electrochemical performance towards sensing of ODZ at the Co₃O₄/SnO₂/GCE.

A review of the incorporation of QDs and imprinting technology in optical sensors – imprinting methods and sensing responses

This review aims to cover the simultaneous method of using molecularly imprinted technology and quantum dots (QDs) as well as its application in the field of optical sensors.

Highly sensitive determination of 4-nitrophenol with coumarin-based fluorescent molecularly imprinted poly (ionic liquid)

A coumarin-based fluorescent molecularly imprinted poly (ionic liquid) (FL-MIPIL) was prepared using a new coumarin-based alkenyl fluorescent ionic liquid (coumarin-FL-IL) as the functional monomer, IL [V₂C₄(mim)₂][(PF₆)₂] and ethyleneglycol dimethacrylate as the cross-linkers, and 4-NP as the template molecule. The absolute quantum yields of coumarin-FL-IL and FL-MIPIL were 7.26 % and 30.66 %, respectively. As a result of the electron transfer between coumarin-FL-IL which contains amino groups and 4-NP bearing hydroxyl groups, FL-MIPIL fluorescence was effectively quenched by 4-NP. The prepared FL-MIPIL sensor can rapidly respond to 4-NP within 60 s. The FL-MIPIL sensor had good linear response to 4-NP from 0.001-7.5 μM and low detection limit of 0.5 nM (S/N = 3). The FL-MIPIL sensor exhibited high sensitivity and good selectivity for 4-NP. The outstanding performance of FL-MIPIL could be ascribed to high fluorescence intensity of FL-MIPIL without matrixes and more interactions between FL-MIPIL and 4-NP. The FL-MIPIL sensor has successfully applied to the determination of 4-NP in lake, rain and waste water samples, river sediment, soil and urine samples.

A fluorescent artificial receptor with specific imprinted cavities to selectively detect colistin

A novel and facile fluorescent artificial receptor on the basis of the molecularly imprinted polymer-coated graphene quantum dots was engineered successfully to detect colistin. The colistin imprinted graphene quantum dots (CMIP-GQDs) was synthesized by vinyl-based radical polymerization between functional monomers and crosslinker at around the template molecule on the surface of graphene quantum dots. The size of bare, CNIP-GQDs, and CMIP-GQDs was about 4.8 ± 0.6 nm, 18.4 ± 1.7 nm, and 19.7 ± 1.3 nm, respectively. The CMIP-GQDs, which showed the strong fluorescence emission at 440 nm with the excitation wavelength fixed at 380 nm, had excellent selectivity and specificity to rapidly recognize and detect colistin. The linear range of fluorescence quenching of this fluorescent artificial receptor for detection colistin was 0.016-2.0 μg mL^-1 with a correlation coefficient (R²) of 0.99919, and the detection limit was 7.3 ng mL^-1 in human serum samples. The designed receptor was successfully applied to detect colistin in human serum samples and it achieved excellent recoveries shifted from 93.8 to 105%. Graphical abstract.

Application of molecularly imprinted polymers and dual-emission carbon dots hybrid for ratiometric determination of chloramphenicol in milk

Chloramphenicol (CLP) is a veterinary antibiotic that has been banned due to its severe side effects but it is still illegally used in animal husbandry. In this work, the fabrication of simple, fast-response and highly selective ratiometric probe for sensitive visual detection of CLP antibiotic at trace levels in both indoor and outdoor is reported. For the construction of the ratiometric fluorescence probe (mMIP@YBCDs), two kinds of different carbon dots with yellow emission (Y/CDs, 560 nm) and blue emission carbon dots (B/CDs, 440 nm) were used as target sensitive and as reference dyes respectively. Besides, molecularly imprinted mesoporous silica was used as a recognized part of the probe. Upon the addition of different concentrations of CLP, the fluorescence of Y/CDs was quenched significantly while the fluorescence intensity of B/CDs stayed constant which was accompanied by gradual fluorescence color change from yellow-to-blue. The ratiometric probe has a linear response in the range of 0.1-3 μgL^-1 with a detection limit 0.035 μgL^-1. The practicality of the ratiometric method was validated by the quantification of CLP in milk samples.

Graphene oxide quantum dots immobilized on mesoporous silica: preparation, characterization and electroanalytical application

Because of its high surface area and combination of various functional groups, graphene oxide (GO) is currently one of the most actively studied materials for electroanalytical applications. It is not practical to utilize self-supported GO on its own and thus it is commonly integrated with different supporting carriers. Having a large lateral size, GO can only wrap the particles of the support and thus can significantly reduce the surface area of porous materials. To achieve synergy from the high surface area and polyfunctional nature of GO, and the rigid structure of a porous support, the lateral size of GO must essentially be decreased. Recently reported graphene oxide quantum dots (GOQDs) can fulfil this task. Here we report the successful preparation of an SiO₂-GOQDs hybrid, where GOQDs have been incorporated into the mesoporous network of silica. The SiO₂-GOQDs emit a strong luminescence with a band maximum at 404 nm. The Raman spectrum of SiO₂-GOQDs shows two distinct peaks at 1585 cm⁻¹ (G-peak) and 1372 cm⁻¹ (D-peak), indicating the presence of a graphene ordered basal plane with aromatic sp²-domains and a disordered oxygen-containing structure. Covalent immobilization of GOQDs onto aminosilica via such randomly structured oxygen fragments was proven with the help of Fourier transform infrared spectroscopy, solid-state cross-polarization magic angle spinning ¹³C nuclear magnetic resonance, and X-ray photoelectron spectroscopy. SiO₂-GOQDs were used as a modifier of a carbon paste electrode for differential pulse voltammetry determination of two antibiotics (sulfamethoxazole and trimethoprim) and two endocrine disruptors (diethylstilbestrol (DES) and estriol (EST)). The modified electrodes demonstrated a significant signal enhancement for EST (370%) and DES (760%), which was explained by a π–π stacking interaction between GOQDs and the aromatic system of the analytes.

Graphene oxide quantum dots incorporated into a mesoporous silica network have been used as a modifier of a carbon paste electrode for the determination of antibiotics and hormones.

Applications of Graphene Quantum Dots in Biomedical Sensors

Due to the proliferative cancer rates, cardiovascular diseases, neurodegenerative disorders, autoimmune diseases and a plethora of infections across the globe, it is essential to introduce strategies that can rapidly and specifically detect the ultralow concentrations of relevant biomarkers, pathogens, toxins and pharmaceuticals in biological matrices. Considering these pathophysiologies, various research works have become necessary to fabricate biosensors for their early diagnosis and treatment, using nanomaterials like quantum dots (QDs). These nanomaterials effectively ameliorate the sensor performance with respect to their reproducibility, selectivity as well as sensitivity. In particular, graphene quantum dots (GQDs), which are ideally graphene fragments of nanometer size, constitute discrete features such as acting as attractive fluorophores and excellent electro-catalysts owing to their photo-stability, water-solubility, biocompatibility, non-toxicity and lucrativeness that make them favorable candidates for a wide range of novel biomedical applications. Herein, we reviewed about 300 biomedical studies reported over the last five years which entail the state of art as well as some pioneering ideas with respect to the prominent role of GQDs, especially in the development of optical, electrochemical and photoelectrochemical biosensors. Additionally, we outline the ideal properties of GQDs, their eclectic methods of synthesis, and the general principle behind several biosensing techniques.

The facile co-precipitation synthesis of strontium tungstate anchored on a boron nitride (SrWO4/BN) composite as a promising electrocatalyst for pharmaceutical drug analysis

Strontium tungstate/boron nitride (SrWO₄/BN) composite considered efficient electrocatalysts in the area of electrochemical sensors.

Molecularly Imprinted Polymer-Based Hybrid Materials for the Development of Optical Sensors

We report on the development of new optical sensors using molecularly imprinted polymers (MIPs) combined with different materials and explore the novel strategies followed in order to overcome some of the limitations found during the last decade in terms of performance. This review pretends to offer a general overview, mainly focused on the last 3 years, on how the new fabrication procedures enable the synthesis of hybrid materials enhancing not only the recognition ability of the polymer but the optical signal. Introduction describes MIPs as biomimetic recognition elements, their properties and applications, emphasizing on each step of the fabrication/recognition procedure. The state of the art is presented and the change in the publication trend between electrochemical and optical sensor devices is thoroughly discussed according to the new fabrication and micro/nano-structuring techniques paving the way for a new generation of MIP-based optical sensors. We want to offer the reader a different perspective based on the materials science in contrast to other overviews. Different substrates for anchoring MIPs are considered and distributed in different sections according to the dimensionality and the nature of the composite, highlighting the synergetic effect obtained as a result of merging both materials to achieve the final goal.

Specific fluorometric assay for direct determination of amikacin by molecularly imprinting polymer on high fluorescent g-C3N4 quantum dots

Here, a specific and reliable fluorometric method for the rapid determination of amikacin was developed based on the molecularly imprinting polymer (MIP) capped g-C₃N₄ quantum dots (QDs). g-C₃N₄ QDs were obtained by facile and one-spot ethanol-thermal treatment of bulk g-C₃N₄ powder and showed a high yield fluorescence emission under UV irradiation. The MIP layer was also created on the surface on QDs, via usual self-assembly process of 3-aminopropyl triethoxysilane (APTES) functional monomers and tetraethyl ortho-silicate (TEOS) cross linker in the presence of amikacin as template molecules. The synthesized MIP-QDs composite showed an improved tendency toward the amikacin molecules. In this state, amikacin molecules located adjacent to the g-C₃N₄ QDs caused a remarkable quenching effect on the fluorescence emission intensity of QDs. This effect has a linear relationship with amikacin concentration and so, formed the basis of a selective assay to recognize amikacin. Under optimized experimental conditions, a linear calibration graph was obtained as the quenched emission and amikacin concentration, in the range of 3-400 ng mL^-1 (4.4-585.1 nM) with a detection limit of 1.2 ng mL^-1 (1.8 nM). The high selectivity of MIP sites as well as individual fluorescence properties of g-C₃N₄ QDs offers a high specific and sensitive monitoring method for drug detection. The method was acceptably applied for the measurement of amikacin in biological samples.

Fabrication of cefotaxime sodium-functionalized gold nanoclusters for the detection of copper ions in Chinese herbal medicines

Antibiotic-based gold nanoclusters (AuNCs) are a good sensing platform for specific recognition; however, the related studies are few. Herein, a simple and facile strategy was proposed for the fabrication of bright blue fluorescent AuNCs through the degradation product (DCTX) of cefotaxime sodium that induced the reduction of HAuCl₄. Various analytical techniques were applied to characterize the prepared AuNCs@DCTX. AuNCs@DCTX exhibited a strong emission peak centered at 420 nm and a quantum yield of 11.8%. Furthermore, an aggregation-induced fluorescence quenching mode endowed the AuNCs@DCTX probe with good specificity and sensitivity for Cu²⁺ detection. The proposed probe had a linear range of 0.01–40 μM, a precision with a relative standard deviation of 1.2% (n = 8), and a detection limit of 8 nM (signal/noise = 3). Interestingly, the probe could be reused through switching the “off” and “on” states by the addition of Cu²⁺ and EDTA. The practicality of the sensing platform was investigated for the determination of Cu²⁺ in four Chinese herbal medicines (CHMs), and the results were in accordance with those obtained by the FAAS method. This study has provided an alternate way for the fabrication of thiolate-protected AuNCs for sensing applications.

Antibiotic-based gold nanoclusters (AuNCs) are a good sensing platform for specific recognition; however, the related studies are few.