Upconversion luminescence nanoparticles-based immunochromatographic assay for quantitative detection of triamcinolone acetonide in cosmetics

A sensitive intelligent point-of-care test method for tert-butylhydroquinone in edible oil via a test strip with a smartphone

Tert-butylhydroquinone (TBHQ) is easily overused or illegally added to edible oil and attracts a growing concern because of its cytotoxic, liver-damaging, and carcinogenic effects. Thus, a sensitive and intelligent point-of-care testing (iPOCT) method is developed to fulfill the on-site monitoring. This iPOCT method depended on a fluorescent immunochromatographic assay within 15 min. Under optimization, the limit of quantification (LOQ) was calculated as 0.03 μg mL-1. The iPOCT method provided a low limit of detection (LOD) of 0.02 μg mL-1, a wide linear range of 0.03-100 μg mL-1, and great selectivity. Recoveries by the spiking experiments ranged from 97.4% to 103.5% with relative standard deviations (RSDs) of 2.4%-4.9% in soybean, peanut, rapeseed, and corn oil samples. The results showed that the iPOCT method is highly consistent with the high-performance liquid chromatography (HPLC) method.

Multi-class analysis of 100 drug residues in cosmetics using high-performance liquid chromatography-quadrupole time-of-flight high-resolution mass spectrometry

Cosmetics are an important aspect of the lives of many people. With an increasing demand for cosmetics, consumers pay more attention to their efficacy and composition. To improve their efficacy, prohibited substances, such as hormones, glucocorticoids, antibiotics, antifungals and antihistamines, may be added to cosmetics. We developed a rapid method for the multi-class analysis of drug residues in toner and lotion cosmetic samples using high-performance liquid chromatography coupled with quadrupole time-of-flight high-resolution mass spectrometry (HPLC-Q-TOF-HRMS). The primary variables in the extraction and purification steps were studied to minimize the interference of the sample matrix. The non-information-dependent sequential window acquisition of all theoretical fragment ion spectra (SWATH®) mode was used to improve the data acquisition efficiency. The secondary product ion peak areas were used for quantification to obtain a satisfactory matrix effects. The validation experiments confirmed that the developed method exhibited good linearity (5-200 ng/L) with correlation coefficients (R) ≥ 0.9902. Our developed method was then successfully applied to 92 real cosmetic samples. The calibration curve established by this method can be used for retrospective quantitative analysis over long durations without re-calibration. This method is efficient and suitable for screening and controlling multi-class prohibited substances in the cosmetics industry to reduce potential risks.

New technologies and reagents in lateral flow assay (LFA) designs for enhancing accuracy and sensitivity

Lateral flow assays (LFAs) are a popular method for quick and affordable diagnostic testing because they are easy to use, portable, and user-friendly. However, LFA design has always faced challenges regarding sensitivity, accuracy, and complexity of the operation. By integrating new technologies and reagents, the sensitivity and accuracy of LFAs can be improved while minimizing the complexity and potential for false positives. Surface enhanced Raman spectroscopy (SERS), photoacoustic techniques, fluorescence resonance energy transfer (FRET), and the integration of smartphones and thermal readers can improve LFA accuracy and sensitivity. To ensure reliable and accurate results, careful assay design and validation, appropriate controls, and optimization of assay conditions are necessary. Continued innovation in LFA technology is crucial to improving the reliability and accuracy of rapid diagnostic testing and expanding its applications to various areas, such as food testing, water quality monitoring, and environmental testing.

A reliable upconversion nanoparticle-based immunochromatographic assay for the highly sensitive determination of olaquindox in fish muscle and water samples

Olaquindox residues in food from its illegal use has received great attention. Here, an immunoassay strategy integrating an upconversion nanoparticle (UCNP)-based immunochromatographic strip with a fluorescence reader was proposed for the highly selective and sensitive detection of olaquindox. Polyacrylic acid-functionalized UCNPs were synthesized using a simple ligand exchange process and combined with an olaquindox polyclonal antibody to form a fluorescent probe. This approach achieved a sensitive response and specific recognition of olaquindox. A convenient upconversion fluorescence reader was introduced to implement accurate and sensitive quantitative analysis of olaquindox based on the fluorescence intensity of control and test lines on a strip. Under optimal conditions, the method demonstrated a favorable linear range (0-50 ng/mL) and sensitive detection (1.42 ng/mL, S/N = 3). This method was applied successfully to determine olaquindox in fish muscle and water samples, and results were consistent with an HPLC approach, and considered a promising strategy for monitoring olaquindox residuals.

Advances on Hormones in Cosmetics: Illegal Addition Status, Sample Preparation, and Detection Technology

Owing to the rapid development of the cosmetic industry, cosmetic safety has become the focus of consumers' attention. However, in order to achieve the desired effects in the short term, the illegal addition of hormones in cosmetics has emerged frequently, which could induce skin problems and even skin cancer after long-term use. Therefore, it is of great significance to master the illegal addition in cosmetics and effectively detect the hormones that may exist in cosmetics. In this review, we analyze the illegally added hormone types, detection values, and cosmetic types, as well as discuss the hormone risks in cosmetics for human beings, according to the data in unqualified cosmetics in China from 2017 to 2022. Results showed that although the frequency of adding hormones in cosmetics has declined, hormones are still the main prohibited substances in illegal cosmetics, especially facial masks. Because of the complex composition and the low concentration of hormones in cosmetics, it is necessary to combine efficient sample preparation technology with instrumental analysis. In order to give the readers a comprehensive overview of hormone analytical technologies in cosmetics, we summarize the advanced sample preparation techniques and commonly used detection techniques of hormones in cosmetics in the last decade (2012-2022). We found that ultrasound-assisted extraction, solid phase extraction, and microextraction coupled with chromatographic analysis are still the most widely used analytical technologies for hormones in cosmetics. Through the investigation of market status, the summary of sample pretreatment and detection technologies, as well as the discussion of their development trends in the future, our purpose is to provide a reference for the supervision of illegal hormone residues in cosmetics.

A Comprehensive Review on Upconversion Nanomaterials-Based Fluorescent Sensor for Environment, Biology, Food and Medicine Applications

Near-infrared-excited upconversion nanoparticles (UCNPs) have multicolor emissions, a low auto-fluorescence background, a high chemical stability, and a long fluorescence lifetime. The fluorescent probes based on UCNPs have achieved great success in the analysis of different samples. Here, we presented the research results of UCNPs probes utilized in analytical applications including environment, biology, food and medicine in the last five years; we also introduced the design and construction of upconversion optical sensing platforms. Future trends and challenges of the UCNPs used in the analytical field have also been discussed with particular emphasis.

Toward Next Generation Lateral Flow Assays: Integration of Nanomaterials

Lateral flow assays (LFAs) are currently the most used point-of-care sensors for both diagnostic (e.g., pregnancy test, COVID-19 monitoring) and environmental (e.g., pesticides and bacterial monitoring) applications. Although the core of LFA technology was developed several decades ago, in recent years the integration of novel nanomaterials as signal transducers or receptor immobilization platforms has brought improved analytical capabilities. In this Review, we present how nanomaterial-based LFAs can address the inherent challenges of point-of-care (PoC) diagnostics such as sensitivity enhancement, lowering of detection limits, multiplexing, and quantification of analytes in complex samples. Specifically, we highlight the strategies that can synergistically solve the limitations of current LFAs and that have proven commercial feasibility. Finally, we discuss the barriers toward commercialization and the next generation of LFAs.

Gold immunochromatographic strip assay for the detection of triamcinolone acetonide and budesonide in milk

A monoclonal antibody against triamcinolone acetonide (TCA) and budesonide (BUD) was prepared using a hapten that was generated by introducing a carboxyl group into the structure of TCA. Based on the prepared monoclonal antibody, a gold nanoparticle-based lateral-flow immunoassay (GLFA) was developed with the ability to screen TCA and BUD in milk. The visible limits of detection of the GLFA for the analysis of TCA and BUD were 0.1 and 0.5 ng/mL with a cutoff value of 5 and 10 ng/mL, respectively, in milk. Average recoveries of TCA and BUD in milk were 92.0-102.2% and 96.0-98.8% with a good correlation between the results from the GLFA and LC-MS/MS analysis. These results demonstrated that the GLFA method for the rapid detection of TCA and BUD in milk samples is reliable and sensitive.

PMVEMA-coated upconverting nanoparticles for upconversion-linked immunoassay of cardiac troponin

Surface engineering of upconverting nanoparticles (UCNPs) is crucial for their bioanalytical applications. Here, an antibody specific to cardiac troponin I (cTnI), an important biomarker for acute myocardial infection, was covalently immobilized on the surface of UCNPs to prepare a label for the detection of cTnI biomarker in an upconversion-linked immunoassay (ULISA). Core-shell UCNPs (NaYF₄:Yb,Tm@NaYF₄) were first coated with poly(methyl vinyl ether-alt-maleic acid) (PMVEMA) and then conjugated to antibodies. The morphology (size and uniformity), hydrodynamic diameter, chemical composition, and amount of coating on the of UCNPs, as well as their upconversion luminescence, colloidal stability, and leaching of Y³⁺ ions into the surrounding media, were determined. The developed ULISA allowed reaching a limit of detection (LOD) of 0.13 ng/ml and 0.25 ng/ml of cTnI in plasma and serum, respectively, which represents 12- and 2-fold improvement to conventional enzyme-linked immunosorbent based on the same immunoreagents.

Nano-biotechnology, an applicable approach for sustainable future

Nanotechnology is one of the most emerging fields of research within recent decades and is based upon the exploitation of nano-sized materials (e.g., nanoparticles, nanotubes, nanomembranes, nanowires, nanofibers and so on) in various operational fields. Nanomaterials have multiple advantages, including high stability, target selectivity, and plasticity. Diverse biotic (e.g., Capsid of viruses and algae) and abiotic (e.g., Carbon, silver, gold and etc.) materials can be utilized in the synthesis process of nanomaterials. "Nanobiotechnology" is the combination of nanotechnology and biotechnology disciplines. Nano-based approaches are developed to improve the traditional biotechnological methods and overcome their limitations, such as the side effects caused by conventional therapies. Several studies have reported that nanobiotechnology has remarkably enhanced the efficiency of various techniques, including drug delivery, water and soil remediation, and enzymatic processes. In this review, techniques that benefit the most from nano-biotechnological approaches, are categorized into four major fields: medical, industrial, agricultural, and environmental.

Sensitive and rapid determination of heat shock protein 70 using lateral flow immunostrips and upconversion nanoparticle fluorescence probes

Heat shock protein 70 (Hsp70), belonging to the heat shock protein (HSP) family, is reported to be a potential diagnostic biomarker.

Immunological Analytical Techniques for Cosmetics Quality Control and Process Monitoring

Cosmetics analysis represents a rapidly expanding field of analytical chemistry as new cosmetic formulations are increasingly in demand on the market and the ingredients required for their production are constantly evolving. Each country applies strict legislation regarding substances in the final product that must be prohibited or regulated. To verify the compliance of cosmetics with current regulations, official analytical methods are available to reveal and quantitatively determine the analytes of interest. However, since ingredients, and the lists of regulated/prohibited substances, rapidly change, dedicated analytical methods must be developed ad hoc to fulfill the new requirements. Research focuses on finding innovative techniques that allow a rapid, inexpensive, and sensitive detection of the target analytes in cosmetics. Among the different methods proposed, immunological techniques are gaining interest, as they make it possible to carry out low-cost analyses on raw materials and finished products in a relatively short time. Indeed, immunoassays are based on the specific and selective antibody/antigen reaction, and they have been extensively applied for clinical diagnostic, alimentary quality control and environmental security purposes, and even for routine analysis. Since the complexity and variability of the matrices, as well as the great variety of compounds present in cosmetics, are analogous with those from food sources, immunological methods could also be applied successfully in this field. Indeed, this would provide a valid approach for the monitoring of industrial production chains even in developing countries, which are currently the greatest producers of cosmetics and the major exporters of raw materials. This review aims to highlight the immunological techniques proposed for cosmetics analysis, focusing on the detection of prohibited/regulated compounds, bacteria and toxins, and allergenic substances, and the identification of counterfeits.

The antibody orientational labeled by StaphylococcusA protein improve the sensitivity of Gold Immunochromatography Assay

The antibody of Cry1Ab-51 was immobilized orientationly in a simple and effective way on Colloidal gold nanoparticles(CGNP) by The staphylococcal protein A(SPA) affinity with the FC fragement of mouse IgG.The lateral flow detection test strip assembled with the probe by orientational labeled method at the optimum operational conditons (new probe) is 10 times more sensitive than the test strip assembled with the probe labeled by Adsorption(conventionally probe). The affinity experiment have shown that the affinity of the new probe is much higher than the conventionally probe. The Immunochromatography gold strip(ICG strip) assembled by the new probe was highly specific to Cry1Ab with no cross-reaction with other transgenic proteins. And it was proved that the specificity of the new probe have no significant change. Furthermore, the ICG strips assembled by the new probe could be stored for 12 months under dry conditions without significant loss of sensitivity.The Orientational labeling the antibodies with Staphylococcus A protein on Colloidal gold proved to be suitable for improving the sensitivity of the ICG strips.

Modification of a nitrocellulose membrane with nanofibers for sensitivity enhancement in lateral flow test strips

Lateral-flow analysis (LFA) is a convenient, low-cost, and rapid detection method, which has been widely used for screening of diseases. However, sensitivity enhancement in LFA is still a focus in this field and remains challenging. Herein, we propose an electrospinning coating method to modify the conventional nitrocellulose (NC) membrane and optimize the liquid flow rate for enhancing the sensitivity of the NC based LFA strips in the detection of human chorionic gonadotropin (HCG) and luteinizing hormone (LH). It can be seen that coating the NC membrane with nitrocellulose fibers could obtain a NC based strip with HCG and LH detection limits of 0.22 and 0.36 mIU mL-1 respectively, and a quantitative linear range of 0.5-500 mIU mL-1. The results show that electrospinning is effective in modifying conventional NC membranes for LFA applications.

Multicolor Coding Up-Conversion Nanoplatform for Rapid Screening of Multiple Foodborne Pathogens

Technologies for rapid screening of multiple foodborne pathogens have been urgently needed because of the complex food matrix and high outbreaks of foodborne diseases. In this study, multicolor coding up-conversion nanoparticles (UCNPs) were synthesized and applied for rapid and simultaneous detection of five kinds of foodborne pathogens. The multicolor coding UCNPs were obtained through doping different concentrations of a sensitizer (Yb³⁺) on the shell of the synthesized NaYF₄:Yb³⁺, Tm³⁺ (20%/2%)@NaYF₄:Yb³⁺, and Er³⁺ (x %/2%) core/shell nanocrystals. All the UCNPs could emit red and green luminescence simultaneously once excited with near-infrared wavelength (980 nm), and the ratio of red and green (R/G ratio) emission light intensity of each kind of UCNPs varied depending on the Yb³⁺ doping concentration. In addition, the magnetic nanoparticles (MNPs) modified with the monoclonal antibodies (mAbs) against the target bacteria were used to capture and separate the bacteria, resulting in obtaining the MNP-bacterium complexes. Different UCNPs with multicolor coding acted as signal probes were also modified with the mAbs to react with the MNP-bacterium complexes to form the MNP-bacterium-UCNP sandwich complexes. After the sandwich complexes were excited with a wavelength of 980 nm, the obtained R/G ratios and the green photoluminescence intensity (PL intensity) could be used to distinguish and quantitatively detect foodborne pathogens, respectively. This proposed nanoplatform could detect five foodborne pathogens simultaneously within 2 h with good sensitivity and specificity, showing great potential for multiplex detection of other targets in the fields of medical diagnosis and food security.

Functional Up-Conversion Nanoparticle-Based Immunochromatography Assay for Simultaneous and Sensitive Detection of Residues of Four Tetracycline Antibiotics in Milk

An ultrahigh-sensitivity lateral flow immunochromatography (LFIC) assay based on up-converting nanoparticles (UCNPs) was developed to carry out a multi-residue detection of tetracycline in milk. The sensitivity of the immunoassay was greatly improved by the use of a broad-spectrum monoclonal antibody attached to UCNPs to form a signal probe. Under the optimal conditions, the UCNP-LFIC assay enabled sensitive detection of tetracycline (TC) as well as of oxytetracycline (OTC), chlortetracycline (CTC), and doxycycline (DOX) within 10 min, with IC ₅₀ values of 0.32, 0.32, 0.26, 0.22 ng/mL, respectively. There was no cross-reactivity with ten other antibiotics. Similarly, we evaluated the experimental results for matrix effects. Experiments involving spiking showed the four tetracycline antibiotics displaying mean recoveries ranging from 93.95 to 111.90% with relative standard deviations (RSDs) of < 9.95%. The detection results of actual samples using the developed method showed a good correlation (R ² ≥ 0.98) with the results using high-performance liquid chromatography (HPLC). Thus, the assay can achieve an ultrahighly sensitive detection of antibiotics in milk, and can hence promote human health and provides promising applications in the bio-detection field.

Visual upconversion nanoparticle-based immunochromatographic assay for the semi-quantitative detection of sibutramine

Immunochromatographic assay (ICA) has been used widely for the onsite monitoring of illegal additives due to its simplicity, speed, and low cost. However, a scanner is commonly required for ICA to achieve quantitative results. In this work, we developed a visual semi-quantitative ICA for sibutramine, a banned additive in diet foods, without the need for a scanner for measurement. Monoclonal antibodies specific for sibutramine were raised and conjugated with upconversion nanoparticles (UCNPs) as the luminescent tracer. ICA was developed by employing multiple test lines to achieve the semi-quantitative detection of sibutramine. Based on the optimal conditions, the cutoff levels (limit of quantitation, LOQ) of T1 line, T2 line, T3 line, and T4 line were 0.02 μg/mL, 0.15 μg/mL, 1.0 μg/mL, and 7.5 μg/mL, respectively, in buffer system. The ICA demonstrated a LOQ at 0.2 mg/kg for sibutramine in diet food samples. The assay (including pretreatment) can be finished within 30 min without the aid of other instruments, except a laser pen. No false positive or false negative results were observed. The results indicated that the proposed method was reliable, simple, and rapid for the screening of sibutramine abuse in diet food samples.

Nanobody-alkaline phosphatase fusion-mediated phosphate-triggered fluorescence immunoassay for ochratoxin a detection

Ochratoxin A (OTA) is a kind of mycotoxin that seriously harms the health of humans and animals. In this study, a nanobody-alkaline phosphatase fusion-mediated phosphate-triggered fluorescence immunoassay (Nb-AP-mediated PT-FIA) was developed for detecting OTA. Based on the constructed phosphate-triggered fluorescence sensing system for Nb-AP and the optimal working conditions, the Nb-AP-mediated PT-FIA has a half maximal inhibition concentration (IC₅₀) of 0.46 ng/mL, a limit of detection (IC₁₀) of 0.12 ng/mL, and a linear range (IC_20-80) of 0.2-1.26 ng/mL, respectively. The recovery experiment indicated acceptable accuracy and precision of the Nb-AP-mediated PT-FIA, and the results were validated by high performance liquid chromatography with fluorescence detector. Thus this proposed method is applicable to sensitive, rapid, and low-cost detection of OTA and other toxic analytes with low molecular weight in food and environment.