Trypsin mediated one-pot reaction for the synthesis of red fluorescent gold nanoclusters: Sensing of multiple analytes (carbidopa, dopamine, Cu2+, Co2+ and Hg2+ ions)

Polyethylenimine-protected green-emission copper nanoclusters as highly effective fluorescent and colorimetric nanoprobe for selective cobalt ions and temperature sensing

Excessive uptake of Co2+ is harmful to one's physical health and should not be ignored. Herein, a polyethylenimine (PEI) protected hydrophilic copper nanoclusters (PEI-CuNCs) with strong green fluorescence emission around 510 nm was apace synthesized employing a one-pot method without hyperthermia. Interestingly, the as-prepared water-soluble PEI-CuNCs can be specifically quenched by Co2+ at pH 6.0, with a wide detection range (0-500 μM) and a sensitive detection limit of 14.9 nM, which was lower than the maximum level in the body. Besides, the colorimetric detection of Co2+ could be additionally realized based upon the typical yellow color of PEI-CuNCs changed to baby-pink color of the PEI-Co2+ complex. Furthermore, the PEI-CuNCs was employed in fabrication portable test strip for visual detection of Co2+ by capturing the change in fluorescence color, which can be ascribed to the coordination interaction between Co2+ and amine groups in PEI, and also the aggregated quenching of large PEI-CuNCs-Co2+ particles formation. Moreover, the PEI-CuNCs displayed excellent reversible thermo-responsive within a temperature range of 20-65 °C. It is worth mentioning that the PEI-CuNCs exhibited low bio-toxicity and excellent cell permeability when selectively detecting Co2+ in living cells by fluorescence microscopy imaging. Armed with these engaging properties, the sensing system paved a new avenue for the effective development of a convenient fluorescence colorimetry sensor for general assessment of potential risks and specific assessment of human security.

A novel 2-(2-aminophenyl) imidazo [1,5-a] pyridine-based fluorescent probe for rapid detection of phosgene

Phosgene is a highly concealed and highly toxic gas that seriously threatens human health and public security. Therefore, the detection of phosgene is of great significance to world security. Herein, a new type of fluorescent probe based on 2-(2-aminophenyl) imidazo [1,5-a] pyridine is reported for the rapid detection of phosgene. The probe itself only emits a faint green fluorescence, while phosgene allows it to produce a strong blue fluorescence. During the recognition process, phosgene interacts simultaneously with both amino site and imidazole moiety in the probe molecule, resulting in a four-ring-fused rigid structure with high fluorescence quantum yield. The probe not only has the characteristics of high efficiency, high sensitivity (detection limit 2.68 nM), and high selectivity, but also has remarkable spectral changes. Finally, a portable test strip is used to detect phosgene in the gas phase, and the fluorescent color change of the test strip can be easily observed. The most exciting thing is that the portable test strip with the probe PMPY-NH2 can produce a strong fluorescence response to 1 ppm of phosgene, which is far lower than the level of phosgene that seriously threatens to human health.

Fluorescent-Based Neurotransmitter Sensors: Present and Future Perspectives

Neurotransmitters (NTs) are endogenous low-molecular-weight chemical compounds that transmit synaptic signals in the central nervous system. These NTs play a crucial role in facilitating signal communication, motor control, and processes related to memory and learning. Abnormalities in the levels of NTs lead to chronic mental health disorders and heart diseases. Therefore, detecting imbalances in the levels of NTs is important for diagnosing early stages of diseases associated with NTs. Sensing technologies detect NTs rapidly, specifically, and selectively, overcoming the limitations of conventional diagnostic methods. In this review, we focus on the fluorescence-based biosensors that use nanomaterials such as metal clusters, carbon dots, and quantum dots. Additionally, we review biomaterial-based, including aptamer- and enzyme-based, and genetically encoded biosensors. Furthermore, we elaborate on the fluorescence mechanisms, including fluorescence resonance energy transfer, photon-induced electron transfer, intramolecular charge transfer, and excited-state intramolecular proton transfer, in the context of their applications for the detection of NTs. We also discuss the significance of NTs in human physiological functions, address the current challenges in designing fluorescence-based biosensors for the detection of NTs, and explore their future development.

Perspectives of different colour-emissive nanomaterials in fluorescent ink, LEDs, cell imaging, and sensing of various analytes

In the past 2 decades, multicolour light-emissive nanomaterials have gained significant interest in chemical and biological sciences because of their unique optical properties. These materials have drawn much attention due to their unique characteristics towards various application fields. The development of novel nanomaterials has become the pinpoint for different application areas. In this review, the recent progress in the area of multicolour-emissive nanomaterials is summarized. The different emissions (white, orange, green, red, blue, and multicolour) of nanostructure materials (metal nanoclusters, quantum dots, carbon dots, and rare earth-based nanomaterials) are briefly discussed. The potential applications of different colour-emissive nanomaterials in the development of fluorescent inks, light-emitting diodes, cell imaging, and sensing devices are briefly summarized. Finally, the future perspectives of multicolour-emissive nanomaterials are discussed.

Dual-Role Peptide with Capping and Cleavage Site Motifs in Nanoparticle-Based One-Pot Colorimetric and Electrochemical Protease Assay

A new method for enzyme substrate assembly and its use in proteolytic enzyme assays with colorimetric and electrochemical detection is presented. The novelty of the method is the use of dual-function synthetic peptide containing both gold clustering and protease-sensitive moieties, which not only induces the simple formation of the peptide-decorated gold nanoparticle test substrates but also allows for the detection of proteolysis in the same batch. Protease-treated nanoparticles with a destabilized peptide shell became more prone to electroactivity, and thus, the model enzyme plasmin activity could be quantified with stripping square wave voltammetry analysis as well, giving an alternative method to conduct aggregation-based assays. Spectrophotometric and electrochemical calibration data proved to be linear within the 40-100 nM active enzyme concentration range, with possible extensions of the dynamic range by varying substrate concentration. The simple initial components and the ease of synthesis make the assay substrate preparation economic and easy to implement. The possibility of cross-check analytical results with two independent measurement techniques in the same batch greatly increases the applicability of the proposed system.

Synthesis of blue fluorescent molybdenum nanoclusters with novel terephthaldehyde-cysteine Schiff base for detection of pyrophosphate

In this work, terephthaldehyde-cysteine-molybdenum nanoclusters (TPA-Cys-MoNCs) were synthesized by using terephthaldehyde-cysteine (TPA-Cys) Schiff base as a novel ligand. The as-synthesized TPA-Cys-MoNCs showed blue fluorescence under UV lamp at 365 nm, displaying emission peak at 455 nm when excited at 340 nm. The fluorescent TPA-Cys-MoNCs are used as a probe for sensitive assay of pyrophosphate (PPi) via fluorescence quenching mechanism. The emission peak intensity of TPA-Cys-MoNCs at 455 nm exhibited a linear quenching with increasing amount of PPi. As a result, quantitative assay was developed for the detection of PPi (0.01-200 µM) with the detection limit of 0.9 nM. The developed probe was successfully demonstrated for the detection of PPi in biofluids (urine and plasma).

Microwave-Assisted Synthesis of Red Emitting Copper Nanoclusters Using Trypsin as a Ligand for Sensing of Pb2+ And Hg2+ Ions in Water and Tobacco Samples

In this work, a microwave assisted method was developed for synthesis of red fluorescent copper nanoclusters (NCs) using trypsin as a template (trypsin-Cu). The as-synthesized trypsin-Cu NCs are stable and water soluble, exhibiting fluorescence emission at 657 nm when excited at 490 nm. The as-prepared red-emitting trypsin-Cu NCs were characterized by using several analytical techniques such as ultraviolet-visible (UV-Vis) and fluorescence, fluorescence lifetime, Fourier transform infrared, and X-ray photoelectron spectroscopic techniques. Red-emitting trypsin-Cu NCs acted as a nanosensor for sensing both Pb2+ and Hg2+ ions through fluorescence quenching. Using this approach, good linearities are observed in the range of 0.1-25 and of 0.001-1 μM with the lower limit of detection of 14.63 and 56.81 nM for Pb2+ and Hg2+ ions, respectively. Trypsin-Cu NCs-based fluorescence assay was successfully applied to detect both Hg2+ and Pb2+ ions in water and tobacco samples.

Gold nanostructures: synthesis, properties, and neurological applications

Recent advances in technology are expected to increase our current understanding of neuroscience. Nanotechnology and nanomaterials can alter and control neural functionality in both in vitro and in vivo experimental setups. The intersection between neuroscience and nanoscience may generate long-term neural interfaces adapted at the molecular level. Owing to their intrinsic physicochemical characteristics, gold nanostructures (GNSs) have received much attention in neuroscience, especially for combined diagnostic and therapeutic (theragnostic) purposes. GNSs have been successfully employed to stimulate and monitor neurophysiological signals. Hence, GNSs could provide a promising solution for the regeneration and recovery of neural tissue, novel neuroprotective strategies, and integrated implantable materials. This review covers the broad range of neurological applications of GNS-based materials to improve clinical diagnosis and therapy. Sub-topics include neurotoxicity, targeted delivery of therapeutics to the central nervous system (CNS), neurochemical sensing, neuromodulation, neuroimaging, neurotherapy, tissue engineering, and neural regeneration. It focuses on core concepts of GNSs in neurology, to circumvent the limitations and significant obstacles of innovative approaches in neurobiology and neurochemistry, including theragnostics. We will discuss recent advances in the use of GNSs to overcome current bottlenecks and tackle technical and conceptual challenges.

Highly fluorescent carbon dots from coix seed for the determination of furazolidone and temperature

In this work, blue emission fluorescent carbon dots (CDs) were fabricated by using the hydrothermal strategy from coix seed for the first time. We found that the prepared CDs possessed many excellent characteristics including excitation-dependent properties, good solubility and strong photostability. The optimal excitation and emission wavelength of CDs were 363 and 435 nm, respectively. Unbelievably, the fluorescence of CDs was selectively and effectively quenched with the addition of furazolidone (Fu). The quenching mechanisms might be assumed to the static quenching and inner filter effect (IFE). Based on this principle, a novel fluorescence probe was developed for the determination of Fu. At the same time, the proposed probe showed excellent sensitivity and selectivity towards Fu with a wide linear range from 0.5 to 100 μM, and the corresponding detection limit was 0.096 μM. Moreover, the CDs also could be applied for the sensing of temperature. The practical application of the CDs for Fu detection in real samples was also confirmed with the satisfactory recoveries changing from 96.6% to 108.5%, which provided huge possibility in the field of medical analysis.

Fluorescent noble metal nanoclusters for contaminants analysis in food matrix

Recently, food safety issues caused by contaminants have aroused great public concern. The development of innovative and efficient sensing techniques for contaminants detection in food matrix is in urgent demand. As fluorescent nanomaterials, noble metal nanoclusters have attracted much attention because of their ease of synthesis, enhanced catalytic activity and biocompatibility, and most importantly, excellent photoluminescence property that provides promising analytical applications. This review comprehensively introduced the synthesis method of noble metal nanoclusters, and summarized the application of metal nanoclusters as fluorescent sensing materials in the detection of pollutants, including pesticides, heavy metal, mycotoxin, food additives, and other contaminants in food. The detection mechanism of pesticide residues mostly relies on the inhibition of natural enzymes. For heavy metals, the detection mechanism is mainly related to the interaction between metal ions and nanoclusters or ligands. It is evidenced that metal nanoclusters have great potential application in the field of food safety monitoring. Moreover, challenges and future trends of nanoclusters were discussed. We hope that this review can provide insights and directions for the application of nanoclusters in contaminants detection.

Glutathione stabilized green-emission gold nanoclusters for selective detection of cobalt ion

A glutathione stabilized Au nanoclusters (GSH-Au NCs) was synthesized here and used to selective detection of cobalt ion. The as-prepared GSH-Au NCs had strong green light emission around 500 nm, and the features of the NCs have been systematically characterized by UV-vis absorption, X-ray photoelectronic spectroscopic, Fourier transform infrared spectroscopy and transmission electron microscope characterization. The interactions between the GSH-Au NCs and metal ions was studied, and the results indicated that the fluorescence of the GSH-Au NCs could be quenched in the presence of Co²⁺ ion at pH of 6.0. The quenching ratio was linear with the concentration of Co²⁺ ions, and the calibration curve was I₀/I = 0.1187c_co + 0.6085 in the Co²⁺ concentration ranges from 2.0 to 50.0 μM with correlation coefficient (R²) of 0.9950 and the limit of detection (LOD, 3σ) of 0.124 μM. In addition, we collected environmental water samples to test the reliability of the method and demonstrated this method is simple, rapid, and selective.

Two-phase activated colorimetric and ratiometric fluorescent sensor for visual detection of phosgene via AIE coupled TICT processes

In this paper, we specifically designed and synthesized an excellent colorimetric and ratiometric fluorescent sensor DPA-CI for rapid and convenient detection of the highly toxic phosgene. DPA-CI was developed by incorporated a diphenylamine (DPA) and a 2-imine-3-benzo[d]imidazole as the enhanced push-pull electronic structure into the coumarin fluorophore matrix. The sensor DPA-CI towards phosgene sensing exhibited both visible colorimetric and ratiometric fluorescent color change in solution and in gaseous conditions with TICT and AIE mechanism respectively, which can be easily distinguished by using the naked eye. Also, the sensor DPA-CI showed splendid sensing performance such as excellent selectivity, rapid response (less than 8 s in THF and 2 min in gaseous condition), and fair sensitivity (limit of detection less than 0.11 ppm in gaseous condition and 0.27 μM in solution). The design strategy based on enhanced push-pull electronic structure with AIE and TICT properties will be helpful to construct a solid optical sensor with excellent potential application prospects for portable and visual sensing of gaseous phosgene through distinct color and ratiometric fluorescence change by the naked eyes.

Copper nanoclusters with/without salicylaldehyde-modulation for multifunctional detection of mercury, cobalt, nitrite and cyanide ions in aqueous solution and bioimaging

The sensitive determination of multiple heavy metal ions and toxic anions is important in biological and environmental fields. Here we report a facile strategy to construct a multifunctional chemosensor for the detection of Hg²⁺, [Formula: see text]Co²⁺, and CN^- in aqueous solution based on the fluorescent copper nanoclusters (Cu NCs). It was interesting to find that salicylaldehyde (SA) could effectively modulate the fluorescence property and sensing behavior of Cu NCs. In the absence of SA, Cu NCs showed 'on-off' fluorescence responses at the addition of Hg²⁺ and [Formula: see text] under different quenching mechanisms. Upon the presence of SA, Cu NCs exhibited a strong intramolecular charge transfer emission at 500 nm, accompanied by the decrease of the initial fluorescence of Cu NCs at 430 nm. This fluorescence on-state of Cu NC-SA at 500 nm was found to be exclusively turned off by Co²⁺ and enhanced by CN^-. Spectroscopy results combined with thermodynamic analysis provided sufficient information to deduce the sensing mechanisms. Finally, the Cu NCs showed high biocompatibility and were able to be used for fluorescence bioimaging in living cells. This study provided a novel and simple strategy to construct the multifunctional chemosensors for bioanalytical applications.

Fabrication, calibration, and preliminary testing of microcantilever-based piezoresistive sensor for BioMEMS applications

In this study, the authors demonstrate the fabrication, calibration, and testing of a piezoresistive microcantilever-based sensor for biomedical microelectromechanical system (BioMEMS) application. To use any sensor in BioMEMS application requires surface modification to capture the targeted biomolecules. The surface alteration comprises self-assembled monolayer (SAM) formation on gold (Au)/chromium (Cr) thin films. So, the Au/Cr coating is essential for most of the BioMEMS applications. The fabricated sensor uses the piezoresistive technique to capture the targeted biomolecules with the SAM/Au/Cr layer on top of the silicon dioxide layer. The stiffness (k) of the cantilever-based biosensor is a crucial design parameter for the low-pressure range and also influence the sensitivity of the microelectromechanical system-based sensor. Based on the calibration data, the average stiffness of the fabricated microcantilever with and without Au/Cr thin film is 141.39 and 70.53 mN/m, respectively, which is well below the maximum preferred range of stiffness for BioMEMS applications. The fabricated sensor is ultra-sensitive and selective towards Hg²⁺ ions in the presence of other heavy metal ions (HMIs) and good enough to achieve a lower limit of detection 0.75 ng/ml (3.73 pM/ml).

A conjugated fluorescent polymer sensor with amidoxime and polyfluorene entities for effective detection of uranyl ion in real samples

It is an important challenge to develop a chemosensor for trace uranyl ion in an aqueous medium for sustainable development of nuclear energy and environmental conservation. A conjugated fluorescent polymer sensor P2 based on amidoxime groups and polyfluorene, which showed good hydrophilous resulting adequate contact with uranyl ions and selectivity and sensitivity even in the presence of other metal ions in DMA/H₂O (v/v = 20:80, pH = 6.0) solution, for uranyl ion was designed and prepared in this work. And it possesses good thermal stability and a larger Stokes shift (108 nm). Importantly, the fluorescence quenching occurred when P2 combining uranium. It had a good linear relationship with UO₂²⁺ concentration in the range of 10 to 200 nM with a fairly low LOD 7.4 × 10^-9 M. Interaction properties between the sensor P2 and UO₂²⁺ and the fluorescent mechanism were investigated by density functional theory (DFT). More importantly, the sensor can be successfully used for the detection of uranyl ion in environmental solutions. This work suggests that conjugated fluorescent polymer with amidoxime groups will be a prospective sensor of uranyl ion in the environmental sample.

A 433-MHz surface acoustic wave sensor with Ni-TiO2-poly(L-lysine) composite film for dopamine determination

A ternary hybrid material composed of Ni nanoparticles (NPs), TiO₂ NPs, and poly(L-lysine) (Ply) was used as a sensing material. It was electrodeposited in situ onto a commercial 433-MHz surface acoustic wave (SAW) resonator to construct a Ni-TiO₂-Ply/SAW sensor. The Ni-TiO₂-Ply sensing layer fully covered the resonant cavity of the SAW resonator. As the sensing layer completely covers the interdigital transducer and piezoelectric substrate, the sensing area is significantly increased, and the resonator is protected from damage or contamination. To detect the level of dopamine (DA) in serum, the fabrication of the Ni-TiO₂-Ply sensing layer, distributions of various components in the sensing layer, and responses of the SAW biosensor to DA were investigated in detail. In addition, an electric field-assisted liquid-phase oxidation technique was developed for loading analytes onto the SAW sensors. After optimizing the pH value and L-lysine content of the sensing layer electrolyte and the pH value of the DA solution, the SAW biosensor responded to DA with a linear concentration range of 1 to 1000 nM, sensitivity of 5.77 MHz nM^-1 cm^-2, and limit of detection of 0.067 nM. Moreover, the sensor exhibited good selectivity, reproducibility, and stability at ambient temperature.Graphical abstract.

Advances in biomedical and pharmaceutical applications of protein-stabilized gold nanoclusters

The interest in using gold nanoclusters (AuNCs) as imaging probes is growing, covering wide ranges of applications. The stabilization of AuNCs with protein ligands enhances their biomedical and pharmaceutical applications. This is due to the biocompatibility, water solubility and bioactivity of proteins. Different factors can control the optical properties of AuNCs such as protein size, amino acids content and conformational structure. Controlling the synthesis conditions can result in tuning the AuNCs excitation, emission, fluorescence intensity and physicochemical properties to fulfill different applications. NIR-emitting protein-stabilized AuNCs are promising as imaging agents for targeting and visualization of cancer in vitro and in vivo. They are promising to be included as an important part of multifunctional theranostic nanosystems, due to their potential dual functions as imaging and photosensitizing agent for photodynamic therapy. Additionally, the protein around AuNCs represents a rich environment of active functional groups that are susceptible for conjugation with various biomolecules. Protein-AuNCs can act as fluorescent probes for rapid and selective analysis of different analytes in solution, cells or biological fluids. In conclusion, the variability of protein-AuNC applications can advance research in different biomedical and pharmaceutical fields.

Natural protein-templated fluorescent gold nanoclusters: Syntheses and applications

For the past decades, the synthesis of metal nanoclusters has been a great interest for research, for their unique physicochemical properties and great contributions to the catalytic, electrical and biomedical applications. Protein-templated gold nanoclusters (AuNCs) is a kind of fluorescent nanomaterials with good solubility, excellent stability, biocompatibility, decent quantum yields and active groups (-COOH, -NH₂) for facilitating modifications. Natural proteins are easily available, commercially affordable, diverse and multitudinous in animals, plants and foods, which provide a template pool for the exploration of AuNCs. This is one of the few reviews of specifically focusing on the natural protein-templated fluorescent AuNCs. The syntheses, properties and applications of different AuNCs were enumerated. Prospects were given on utilizing structure-modified proteins, bioactive enzymes, antibodies which should endow the AuNCs more favourable fluorescence performances and functional characteristics. The applications of AuNCs in analytical, biomedical and food sciences would be further heightened.

A novel gold-nanocluster-based fluorescent sensor for detection of sodium 2-mercaptoethanesulfonate

Gold nanoclusters (Au NCs) are widely used in various types of detections due to their unique fluorescence properties. However, there are rare reports on enhanced fluorescence sensors for drug molecules. Here, we report a novel strategy for detection of sodium 2-mercaptoethanesulfonate (MES) by using a fluorescence-enhanced histidine stabilized Au NCs (His-Au NCs) probe. This fluorescence probe showed excellent selectivity and sensitivity towards MES. Furthermore, we have demonstrated that the fluorescence enhancement of His-Au NCs was attributed to ligand exchange with MES by Fourier Transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). The feasibility of practical applications of this probe was further investigated by sensing the MES content in Mesna injection (Uromitexan).