A novel chromone based colorimetric sensor for highly selective detection of copper ions: Synthesis, optical properties and DFT calculations

Advances in chromone-based copper(ii) Schiff base complexes: synthesis, characterization, and versatile applications in pharmacology and biomimetic catalysis

Chromones are well known as fundamental structural elements found in numerous natural compounds and medicinal substances. The Schiff bases of chromones have a much wider range of pharmacological applications such as antitumor, antioxidant, anti-HIV, antifungal, anti-inflammatory, and antimicrobial properties. A lot of research has been carried out on chromone-based copper(ii) Schiff-base complexes owing to their role in the organometallic domain and promise as potential bioactive cores. This review article is centered on copper(ii) Schiff-base complexes derived from chromones, highlighting their diverse range of pharmacological applications documented in the past decade, as well as the future research opportunities they offer.

Dual-emission ciprofloxacin-gold nanoclusters enable ratiometric sensing of Cu2+, Al3+, and Hg2

An innovative triple optical sensor is presented that utilizes gold nanoclusters (GNCs) stabilized with ciprofloxacin (CIP) and bovine serum albumin (BSA). The sensor is designed to identify three critical metal ions, namely Cu2+, Al3+, and Hg2+. Under 360 nm excitation, the synthesized CIP-BSA-GNCs demonstrate dual fluorescence emission with peaks at 448 nm (blue) and 612 nm (red). The red emission is associated with the interior of the CIP-BSA-GNCs, whereas the blue emission results from the surface-bound CIP molecules. The sensitive and selective fluorescent nanosensor CIP-BSA-GNCs were employed to detect Cu2+, Al3+, and Hg2+ ions. Cu2+ effectively quenched the fluorescence intensity of the CIP-BSA-GNCs at both peaks via the internal charge transfer mechanism (ICT). Cu2+ could be detected within the concentration range 1.13 × 10-3 to 0.05 µM, with a detection limit of 0.34 nM. Al3+ increased the intensity of CIP fluorescence at 448 nm via the chelation-induced fluorescence enhancement mechanism. The fluorescence intensity of the core CIP-BSA-GNCs at 612 nm was utilized as a reference signal. Thus, the ratiometric detection of Al3+ succeeded with a limit of detection of 0.21 nM within the dynamic range 0.69 × 10-3 to 0.07 µM. Hg2+ effectively quenched the fluorescence intensity of the CIP-BSA-GNCs at 612 nm via the metallophilic interaction mechanism. The fluorescence intensity of CIP molecules at 448 nm was utilized as a reference signal. This allowed for the ratiometric detection of Hg2+ with a detection limit of 0.7 nM within the concentration range 2.3 × 10-3 to 0.1 µM.

Recent Development on Copper-Sensor and its Biological Applications: A Review

Metal ion recognition is one of the most prospective research topics in the field of chemical sensors due to its wide range of clinical, biological and environmental applications. In this context, hydrazones are well known compounds that exhibit metal sensing and several biological properties due to the presence of N=CH- bond. Some of the biological properties includes anti-cancer, anti-tumor, anti-oxidant, anti-microbial activities. Hydrazones are also used as a ligand to detect metal ion as well as to generate metal complexes that exhibit medicinal properties. Thus, in recent years, many attempts were made to develop novel ligands with enhanced metal sensing and medicinal properties. In this review, some of the recent development on the hydrazones and their copper complexes are covered from the last few years from 2015-2023. These includes significance of copper ions, synthesis, biological properties, mechanism and metal sensing properties of some of the copper complexes were discussed.

Colorimetric detection of fluoride and mercury (II) ions using isatin Schiff base skeleton bearing pyridine-2-carboxamidine moiety: Experimental and theoretical studies

An isatin-Schiff base ligand (ISS) bearing a pyridine-2-carboxamidine moiety was synthesized through a facile and convenient method for the highly selective colorimetric detection of Hg+2 and F- ions. The sensing ability of the synthesized ISS sensor toward Hg+2 and F- was established using colorimetric and UV-visible techniques. The developed sensor showed excellent selectivity in the presence of other competing ions for Hg+2 and F-, with a color change from yellow to red. The limits of the detection for sensing Hg+2 and F- were calculated to be 2.9 ×10-6 M and 1.4 ×10-5 M, respectively. Job's plot based on spectroscopic data revealed a 1:1 binding stoichiometry between ISS and Hg+2 or F- ion. Furthermore, the binding mechanism, optimized structures and electronic properties of ISS, ISS-F- adduct and ISS-Hg+2 complex were investigated using density functional theory (DFT) calculations. DFT results indicated a decrease of the HOMO-LUMO energy gap for ISS upon interaction with the F- and Hg+2 species which were in good agreement with the experimental outcomes.

Spectroscopic and TD-DFT studies on the chromo-fluorogenic detection of cyanide ions in organic and aquo-organic media

A new naked-eye chromogenic and fluorogenic probe KS5 has been developed for the detection of CN- ions in neat DMSO and H2O:DMSO (1:1 v/v) media. The probe KS5 exhibited selectivity towards CN- and F- ions in organic and high selectivity towards CN- ions in aquo-organic media resulting in a colour change from brown to colourless and a turn-on fluorescence response. The probe could able to detect CN- ions via a deprotonation process, which was conceived by consecutive addition of hydroxide and hydrogen ions and confirmed using 1H NMR studies. The limit of detection (LOD) of KS5 towards CN- ions were in the range of 0.07-0.62 µM in both these solvent systems. Suppression of intra-molecular charge transfer (ICT) transition and photoinduced electron transfer (PET) process of KS5 by the added CN- ions are responsible for the chromogenic and fluorogenic changes observed, respectively. Density Functional Theory (DFT) and Time-Dependent Density Functional Theory (TD-DFT) calculations strongly supported the proposed mechanism along with the optical properties of the probe before and after the addition of CN- ions. To prove the practical applicability, KS5 was successfully utilized to detect CN- ions in cassava powder and bitter almonds as well as to determine CN- ions in various real water samples.

Multi-Spectroscopic and TD-DFT Studies on Chromogenic and Fluorogenic Detection of Cyanide in an Aqueous Solution

Different spectroscopic techniques and Density Functional Theory (DFT)/Time-Dependent Density Functional Theory (TDDFT) calculations have been employed to investigate the dual channel CN- detection behaviour of the developed chemo-dosimeter (AK3). The CN- with AK3 reaction triggered a colour change from pale yellow to colourless and enhanced fluorescence. UV-Vis, fluorescence, 1H & 13C NMR and mass techniques coupled with theoretical calculations (Mulliken charges, dihedral angles) revealed that the CN- sensing process mechanism involves deprotonation of the N-H group followed by nucleophilic addition reaction. Detailed TD-DFT calculations showed that the relaxation of excited electrons from LUMO and to two different ground states is responsible for the weak/moderate fluorescence of AK3. Nucleophilic addition of CN- to the C-atom of the CH = CH bridge terminated the π-conjugation between donor and acceptor regions, reduced the coplanarity, decreased the ICT transition and consequently enhanced the fluorescence of the probe. The practical utility of the probe was demonstrated by detecting cyanide in food materials and determining CN- in environmental water samples.

Luminous Insights: Exploring Organic Fluorescent "Turn-On" Chemosensors for Metal-Ion (Cu+2, Al+3, Zn+2, Fe+3) Detection

There are several metal ions that are vital for the growth of the environmental field as well as for the biological field but only up to the maximum limit. If they are present in excess, it could be hazardous for the human health. With the growing technology, a series of various detection techniques are employed in order to recognize those metal ions, some of them include voltammetry, electrochemical methods, inductively couples, etc. However, these techniques are expensive, time consuming, requires large storage, advanced instrumentation, and a skilled person to operate. So, here comes the need of a sensor and it is defined as a miniature device which detects the substance of interest by giving response in the form of energy change. So, from past few decades, many sensors have been formulated for detecting metal ions with some basic characteristics like selectivity, specificity, sensitivity, high accuracy, lower detection limit, and response time. Detecting various metal ions by employing chemosensors involves different techniques such as fluorescence, phosphorescence, chemiluminescence, electrochemical, and colorimetry. The fluorescence technique has certain advantages over the other techniques. This review mainly focuses on the chemosensors that show a signal in the form of fluorescence to detect Al+3, Zn+2, Cu+2, and Fe+3 ions.

Zinc-Carnosine Metallodrug Network as Dual Metabolism Inhibitor Overcoming Metabolic Reprogramming for Efficient Cancer Therapy

The targeting of tumor metabolism as a novel strategy for cancer therapy has attracted tremendous attention. Herein, we develop a dual metabolism inhibitor, Zn-carnosine metallodrug network nanoparticles (Zn-Car MNs), which exhibits good Cu-depletion and Cu-responsive drug release, causing potent inhibition of both OXPHOS and glycolysis. Notably, Zn-Car MNs can decrease the activity of cytochrome c oxidase and the content of NAD⁺, so as to reduce ATP production in cancer cells. Thereby, energy deprivation, together with the depolarized mitochondrial membrane potential and increased oxidative stress, results in apoptosis of cancer cells. In result, Zn-Car MNs exerted more efficient metabolism-targeted therapy than the classic copper chelator, tetrathiomolybdate (TM), in both breast cancer (sensitive to copper depletion) and colon cancer (less sensitive to copper depletion) models. The efficacy and therapy of Zn-Car MNs suggest the possibility to overcome the drug resistance caused by metabolic reprogramming in tumors and has potential clinical relevance.

Schiff Base Ligand 3-(-(2-Hydroxyphenylimino) Methyl)-4H-Chromen-4-One as Colorimetric Sensor for Detection of Cu2+, Fe3+, and V5+ in Aqueous Solutions

The ligand 3-(-(2-hydroxyphenylimino) methyl)-4H-chromen-4-one (SL) has been synthesized and examined as a chemosensor for some metal ions in aqueous solutions based on colorimetric analysis. Color changes were monitored using UV-visible spectroscopy. Binding stoichiometry and limit of detection (LOD) were estimated using titration experimentation based on UV-visible absorbance and Job's plot. The synthesized ligand was tested for selectivity in the presence of several cations and was examined for possible utility as a chemosensor in real water samples. The results indicated sensing ability and selectivity for Cu²⁺, Fe³⁺, and V⁵⁺. Stable complexes were formed between SL and Cu²⁺, Fe³⁺, and V⁵⁺, and the ligand-to-metal binding stoichiometry was found 2 : 1 in the SL-Cu²⁺ and SL-Fe³⁺ complexes, and 1 : 1 in the SL-V⁵⁺ complex. The results of LOD and bending constant were (7.03 μM, 1.37 × 10⁴ M^-1), (5.16 μM, 2.01 × 10⁴ M^-1), and (5.94 μM, 1.82 × 10⁴ M^-1) for Cu²⁺, Fe³⁺, and V⁵⁺, respectively.

A new chromone functionalized isoqunoline derived chemosensor with fluorogenic switching effect for selective detection of Zn2+ in real water samples and living cells

In this work, a selective chemosensor, (E)-N'-((4-oxo-4H-chromen-3-yl)methylene)isoquinoline-1-carbohydrazide (ENO), was rationally developed for colorimetric and fluorogenic detection of Zn²⁺ ions. It was readily synthesized from 4-oxo-4H-chromene-3-carbaldehyde and isoquinoline-1-carbohydrazide via one-step Schiff reaction. ENO exhibited excellent fluorescent response performances toward Zn²⁺ over a wide pH range in EtOH/H₂O media, including a distinguished color change from colorless to gold, a low limit of detection (LOD) value (34 nM), strong complexation ability (1.36 × 10⁵ M^-1) and rapid identification (2 min). The sensing mechanism of ENO toward Zn²⁺ was proposed on the basis of the chelation-enhanced fluorescence (CHEF) process, which was further supported by IR studies and the density functional theory (DFT) calculation. Moreover, ENO presented here demonstrated outstanding capability in monitoring trace level of Zn²⁺ ions in real water samples, living cells as well as the on-site assay kit.

A highly selective silver ion optical chemosensor based on isoxazolyl-azo pyrimidine: synthesis, spectroscopy, DFT calculations and applications

In this work, an isoxazolyl-azo pyrimidine optical chemosensor (PICS) was efficiently synthesized and applied for naked-eye detection of Ag⁺ ions in solution. The chemical formula of the PICS was recognized by UV-vis, FTIR and NMR analyses. The detection ability of PICS toward various ions was assessed. The results revealed the excellent selectivity and sensitivity of the chemosensor PICS to Ag⁺ ions in aqueous DMSO solutions. The PICS displayed an obvious color change from yellow to dark red in the presence of silver ions. The PICS could efficiently detect Ag⁺ ions over a wide pH range of 6-11, which makes it suitable for detection of Ag⁺ under physiological conditions. PICS also binds Ag⁺ ions to form a 1 : 1 stoichiometry complex (PICS-Ag⁺), resulting in a bathochromic shift in the absorption maximum from 372 to 410 nm. The detection limit of the probe PICS towards Ag⁺ was calculated to be 1.78 μM. Furthermore, the probe PICS shows excellent detection performance in the solid state, and PICS-based test strips were fabricated and applied as efficient Ag⁺ test kits for detection of silver ions in water samples. In addition, the sensing mechanism of PICS-Ag⁺ was completely evaluated using the density functional theory (DFT) calculations. Results indicated that the calculated energy gap between the HOMO and LUMO (3.41 eV) of PICS-Ag is lower than that of the free PICS (3.57 eV). This suggests that a red shift occurred upon addition of the Ag⁺ ion to PICS.

A Quinoxaline-Naphthaldehyde Conjugate for Colorimetric Determination of Copper Ion

This work facilitates detection of bivalent copper ion by a simple Schiff base probe QNH based on a quinoxaline−naphthaldehyde framework. The detailed study in absorption spectroscopy and theoretical aspects and crystal study of the probe and probe−copper complex has been discussed. The detection limit of the probe in the presence of Cu²⁺ is 0.45 µM in HEPES−buffer/acetonitrile (3/7, v/v) medium for absorption study. The reversibility of the probe−copper complex has been investigated by EDTA. The selective visual detection of copper has been established also in gel form.

A new and efficient diaminopyrimidine-based colorimetric and fluorescence chemosensor for the highly selective and sensitive detection of Cu2+ in aqueous media and living cells

In this paper, a new and effective diaminopyrimidine-based chemosensor (DAPCS) was developed for the highly selective and ultra-sensitive detection of Cu²⁺ ion in aqueous media and living cell. Characterization and structure determining of DAPCS was determined by UV-Vis, FTIR and NMR analyses. It is observed that DAPCS and Cu (II) forms a ligand to metal charge transfer (LMCT) complex which produces distinguishable red color. The results also indicate that the DAPCS easily interacts with Cu²⁺ ion to form a 1:1 stoichiometry complex (DAPCS -Cu²⁺), resulting in a bathochromic shift in absorption maximum (429 nm to 449 nm) and remarkable quenching fluorescence intensity at the wavelength of 501 nm in DMSO-H₂O solution. Furthermore, the detection limit of DAPCS towards Cu²⁺ was calculated to be 3.19 µM. Meanwhile, DAPCS was applied as fluorescent probe for detection of Cu²⁺ ions with the detection limit of 0.014 µM. The optimal pH range of probe DAPCS for quantitative analysis of Cu²⁺ ions was 9-11, which renders it suitable for detection of Cu²⁺ under physiological conditions. Additionally, the DAPCS could be applied to detect Cu²⁺ in real water samples and in HeLa cells, indicating the practical uses of DAPCS in real analyses.

Chromone functionalized pyridine chemosensor for cupric ions detection

A new Schiff base 2-ethoxy-3-{[(6-{[(2-ethoxy-4-hydroxy-2H-chromen-3-yl)methylidene]amino}pyridine-2-yl)imino]methyl}-2H-chromen-4-ol (CD) was synthesized as a result of the condensation of 2,6-diaminopyridine and 3-formyl chromone in 1:2 M ratio and used for cupric ions detection and characterized through FTIR, HRMS and ¹H NMR spectral techniques. The sensing capability of Schiff base for cupric ions as compared to other transition metal ions was examined by absorbance and emission studies. A considerable decrease in emission intensity appeared in Schiff base in the case of cupric ions while irrelevant changes were examined for the rest of the ions. The binding stoichiometry was obtained as 1:2 for CD: Cu²⁺ complex intended from the job's plot which was confirmed through HRMS spectral technique. DFT calculations were carried for the confirmation of structural relationships and absorption-emission data. The Regression coefficient, Limit of detection, and Association constant were obtained as 98.7%, 1.2 × 10^-6 M, and 3.26 × 10⁴ M^-1 respectively using Benesi-Hildebrand (B-H) equation. The sensing power of Schiff base CD to recognize cupric ions was unaltered by the addition of the rest of metal ions, which was authenticated through interference studies. Schiff base CD and its complex with cupric ions were found stable over an extensive time period as revealed by time-reliant studies. The data collected by pH studies revealed that the preferred pH range for detecting cupric ions by Schiff base CD was 6 to 11. The Schiff base was finally utilized for sensing cupric ions in a variety of spiked samples of water like canal water, tap water, groundwater, distilled water.

Pyranopyrazole based Schiff base for rapid colorimetric detection of arginine in aqueous and real samples

A novel pyranopyrazole-based Schiff base PPS has been synthesized via a condensation reaction between aldehyde and hydrazide derivatives of pyranopyrazole.

Highly Sensitive and Selective Spiropyran-Based Sensor for Copper(II) Quantification

The metal-binding capabilities of the spiropyran family of molecular switches have been explored for several purposes from sensing to optical circuits. Metal-selective sensing has been of great interest for applications ranging from environmental assays to industrial quality control, but sensitive metal detection for field-based assays has been elusive. In this work, we demonstrate colorimetric copper sensing at low micromolar levels. Dimethylamine-functionalized spiropyran (SP1) was synthesized and its metal-sensing properties were investigated using UV-vis spectrophotometry. The formation of a metal complex between SP1 and Cu²⁺ was associated with a color change that can be observed by the naked eye as low as ≈6 μM and the limit of detection was found to be 0.11 μM via UV-vis spectrometry. Colorimetric data showed linearity of response in a physiologically relevant range (0-20 μM Cu²⁺) with high selectivity for Cu²⁺ ions over biologically and environmentally relevant metals such as Na⁺, K⁺, Mn²⁺, Ca²⁺, Zn²⁺, Co²⁺, Mg²⁺, Ni²⁺, Fe³⁺, Cd²⁺, and Pb²⁺. Since the color change accompanying SP1-Cu²⁺ complex formation could be detected at low micromolar concentrations, SP1 could be viable for field testing of trace Cu²⁺ ions.

Fabrication of the Ni-based composite wires for electrochemical detection of copper(Ⅱ) ions

Copper ions (Cu²⁺) pollution in the water environment poses a great threat to the health function of life-sustaining metabolic activities. However, the current detection methods need relatively expensive instruments, complex operation procedures and long time, so a facile and direct detection method is desired to be developed. In this work, the Ni-based composite wires with p-n junction (the Ni/NiO/ZnO/Chitosan wire) and Schottky junction (the Ni/NiO/Au/Chitosan wire) were fabricated, and the barrier driven electrochemical sensing mechanism was studied. The direct and facile detection of Cu²⁺ was achieved with a wide linear range (0-6000 nM) and a low LOD (0.81 nM). The excellent stability and recovery in real water samples made the Ni-based composite wires a promising candidate for the practical application. The interfacial barriers of semiconductor can be used as a special sensing factor to develop novel sensors.

Sensitive and selective colorimetric detection of Cu (II) in water samples by thiazolylazopyrimidine-functionalized TiO2 nanoparticles

In this study, a new thiazolylazopyrimidine-functionalized TiO₂ nanosensor (TiO₂-TAP) has been developed for sensitive and selective colorimetric detection of Cu²⁺ in water samples. Thiazolylazopyrimidine (TAP) as an azo ligand and TiO₂-TAP as highly selective nanosensor were successfully prepared through the diazo coupling reaction and surface chemical modification, respectively. Characterization of TiO₂-TAP NPs using Fourier transmission infrared (FT-IR), field emission scanning electron microscopy (FESEM), energy dispersive X- ray spectroscopy (EDX), and X-ray diffraction (XRD) analysis revealed that the TiO₂ NPs were effectively modified with the synthesized epoxy-activated thiazolylazopyrimidine. The synthesized azo ligand containing azo chromophore (N=N) produce color and make a stable complex formation with Cu²⁺ based on charge-transfer transduction in the detection system. The color change of TiO₂-TAP solution from yellow to red occur directly after few seconds of addition of Cu²⁺ ions, as a result of surface complexation. The TiO₂-TAP has revealed high affinity, sensitivity and selectivity for copper ion over other competing metal ions in aqueous media. The experimental data revealed that the Cu²⁺ ions was sensed and adsorbed by the TiO₂-TAP at optimal pH 5.0. The results also confirmed that the TiO₂-TAP has a wide linear detection range for Cu²⁺ (0.01 to 12.5 μM). From UV-vis titration experiment, the limit of detection (LOD) for Cu²⁺ ions was found to be 2.51 nM. The proposed method was successfully applied for the sensitive and selective detection of Cu²⁺ in tap water, sea water and well water. In addition, Cu²⁺ recovery improved using the TiO₂-TAP containing N, S and O atoms as chelating sites. Therefore, the developed nanosensor with great features like the cost-effective, excellent sensitively and selectively, short response times and high adsorption efficiency for Cu²⁺ can be utilized in any physical and biological conditions.

Novel edaravone-based azo dyes: efficient synthesis, characterization, antibacterial activity, DFT calculations and comprehensive investigation of the solvent effect on the absorption spectra

The present study deals with designing and synthesizing novel dyes using the drug combination of edaravone and azo compounds which can be used as an indicator for anions and cations. The desired product synthesis was accomplished via a two-step process involving diazotizing the aromatic amines followed by the resultant salts coupling with edaravone. The resulting dyes were obtained with high yields under mild conditions. The structures of the dyes were identified with UV-vis, FT-IR, ¹H NMR and ¹³C NMR spectra and CHN analysis. To investigate the solvatochromism effect, the interaction of different solvents with the selected dyes was evaluated using several parameters including the dielectric constant, refractive index, hydrogen bond donating ability, hydrogen bond accepting ability and dipolarity/polarizability scale. To achieve deep understanding about the stability and geometrical characteristics of the azo–hydrazo tautomers of the synthesized dyes and their UV-visible spectra prediction, some DFT calculations were also carried out on the synthesized dyes. The antibacterial activities of some synthesized compounds were also evaluated using the disk diffusion method. The results revealed different activity of the selected synthesized dyes for antibacterial tests against selected Gram positive and Gram negative bacteria.

The present study deals with designing and synthesizing novel dyes using the drug combination of edaravone and azo compounds which can be used as an indicator for anions and cations.

Simultaneous measurement of Cr(III) and Cu(II) based on indicator-displacement assay using a colorimetric nanoprobe

High-performance analysis of heavy metal ions is great importance in both environment and food safety. In this work, a facile and reliable colorimetric sensor was presented for simultaneous detection of Cu²⁺ and Cr³⁺ based on indicator-displacement assay (IDA). As a typical silicate nanomaterials, ZnSiO₃ hollow nanosphere (ZSHS) exhibited an outstanding ion exchange capacity. Zincon was incorporated with the ZSHS to form a zincon/ZSHS hybrid ionophore with a blue color. Upon the addition of Cr³⁺, IDA reaction and selective ion exchange occurred with the color change of zincon/ZSHS ionophore from blue to yellow. With such a design, colorimetric measurement of Cr³⁺ was realized. The linear concentration for Cr³⁺ detection ranged from 0.5 μM to 75 μM with the LOD of 83.2 nM. Furthermore, we also screened different kinds of complexing agents that may respond with zincon/ZSHS ionophore and various metal ions. It was found that tartaric acid (TA) showed the chelation capability of Zn²⁺-TA is stronger than that of Zn²⁺-zincon. Thus zincon/ZSHS/TA presented a yellow color due to the chelation reaction of Zn²⁺-TA, releasing the zincon as a free state. After addition of Cu²⁺, a stronger chelation reaction of Cu²⁺-zincon occurred. This process involved in the color change from yellow to blue and realized colorimetric measurement of Cu²⁺. The detection limit of Cu²⁺ was calculated to be 43.7 nM with linear range from 0.1 to 20 μM. In addition, the zincon/ZSHS nanoprobe was successfully applied for simultaneous measurement of Cu²⁺ and Cr³⁺ in sorghum and river water, indicating that the zincon/ZSHS nanoprobe provided a promising sensing platform in environment and food safety.

Highly efficient detection of Cu2+ and B4 O7 2- based on a recyclable asymmetric salamo-based probe in aqueous medium

An asymmetric salamo-based probe molecule (H₂ L) was synthesized and characterized structurally. When DMF/H₂ O (9:1) was used as the solvent, it was shown probe H₂ L has high sensitivity to Cu²⁺ . Using high-resolution mass spectrometry and theoretical calculation, it was found that probe H₂ L could form a more stable complex (1:1) with Cu²⁺ , the minimum limit of detection (LOD) of H₂ L for Cu²⁺ was calculated as 9.95 × 10^-8 M. In addition, probe H₂ L could also be used to identify B₄ O₇ ^2- under the same detection conditions and the minimum LOD of H₂ L for B₄ O₇ ^2- was calculated as 4.98 × 10^-7 M. At the same time, density functional theory theoretical calculation further proved the flexibility of probe H₂ L. Through the action of EDTA, probe H₂ L had a cyclic ability to recognize Cu²⁺ , and showed a better response in the physiological pH range; probe H₂ L had the characteristics of fast recognition speed and high efficiency. In addition, with probe H₂ L test paper for Cu²⁺ and B₄ O₇ ^2- , the effect was more obvious. Meanwhile, probe H₂ L can be used to quantitatively detect Cu²⁺ in water samples.

Simple C3-symmetric triaminoguanidine-triphenylamine conjugate as an efficient colorimetric sensor for Cu(II) and fluorescent sensor for Fe(III) ions

The design and construction of novel C₃-symmetric triaminoguanidine-triphenylamine conjugate (L) has been demonstrated and it displays positive solvatochromic behaviour with an increase in solvent polarity. The probe L acts as a selective colorimetric sensor for Cu²⁺ ions over other metal ions. Further, it shows high selective and sensitive detection of Fe³⁺ ions through turn-on fluorescence response. Moreover, the detection limits for Cu²⁺ and Fe³⁺ ions were found to be within the allowable range of the World Health Organisation (30 μM). The real-time application of the probe was showed by paper strip experiments as well as detection of Fe³⁺ ions in pharmaceutical tablets.

Sequential colorimetric sensing of cupric and mercuric ions by regulating the etching process of triangular gold nanoplates

A triangular gold nanoplate (AuNPL)-based colorimetric assay is presented for ultrasensitive determination of cupric ions (Cu²⁺⁾ and mercuric ions (Hg²⁺) in sequence. AuNPLs were found to be etched efficiently when producing triiodide ions (I₃^-) by a redox reaction between Cu²⁺ and iodide ions (I^-), leading to a change of the shape of AuNPLs from triangular to sphere along with a color change from blue to pink. In the presence of Hg²⁺ the etching of AuNPLs was suppressed due to the consumption of I^- by the formation of HgI₂. With an increase of the concentration of the Hg²⁺ a transformation from sphere to triangular in the shape of AuNPLs occurred with a color change from pink to blue. The evolution of AuNPLs from etching to anti-etching state by sequential addition of Cu²⁺ and Hg²⁺ was accompanied with color variations and band shifts of localized surface plasmon resonance (LSPR), allowing for visual and spectroscopic determination of Cu²⁺ and Hg²⁺ successively within 15 min. In the range 0.01-1.5 μM for Cu²⁺ and 0.02-3.0 μM for Hg²⁺, the linear relationship between the band shift values and the target ions concentration was found good (R² > 0.996). The limit of detections (3S/k) was 19 nM for Cu²⁺ and 9 nM for Hg²⁺, respectively. The lowest visual estimation concentration was 80 nM for both Cu²⁺ and Hg²⁺ through the distinguishable color changes. This system exhibited desirable selectivity for Cu²⁺ and Hg²⁺ over other common ions tested. The method has been successfully applied to sequential determination of Cu²⁺ and Hg²⁺ in real water and food samples. Graphical abstract Scheme 1 Schematic illustration for sequential detection of Cu²⁺ and Hg²⁺ based on etching of AuNPLs.

A simple pyrimidine based colorimetric and fluorescent chemosensor for sequential detection of copper (II) and cyanide ions and its application in real samples

In this study, a new pyrimidine-based chemosensor (PyrCS) has been developed for sequential detection of copper (II) and cyanide ions. The PyrCS has revealed high sensitivity and selectivity toward copper ion over other metal ions in aqueous media. The PyrCS as an optical probe exhibited a distinct color change and a bathochromic shift in UV spectra in the presence of copper ion in a few seconds due to the formation of stable complex (PyrCS-Cu²⁺). The results confirmed that the PyrCS has a widely linear detection range of 0.3-30 μM toward Cu²⁺. The calculated limit of detection for Cu²⁺ ions was low as 0.116 μM. Moreover, the fluorescent intensity of PyrCS at 507 nm was significantly quenched in the presence of Cu²⁺ and Fe²⁺ ions. Additionally, complex PyrCS-Cu²⁺ was successfully used to detect cyanide ions via Cu²⁺ displacement approach. The free PyrCS was recovered after adding the CN‾ ions in a few seconds due to the formation of the stable copper cyanide complex Cu(CN)_x. The calculated LOD for CN‾ ions was low as 0.320 μM. The data also clarified that the other competing anions did not create a clear color change in solutions. Since the proposed method could provide a vivid colorimetric response in the presence of detected analytes within the pH range of 3-9, we can claim that the developed chemosensor can be utilized in any physical and biological conditions.