TICT fluorescent probe for Al3+: Sequential detection of PPi, ATP and ADP in semi-aqueous medium and real-life applications

A naphthyl appended ninhydrin based colorimetric chemosensor for Cu2+ ion: Detection of cysteine and ATP

A ninhydrin-based colorimetric chemosensor (LH) was synthesized using 3-hydroxy-2-naphthoic hydrazide and 11H-indeno[1,2-b]quinoxalin-11-one. It was characterized by spectroscopic and single crystal X-ray diffraction techniques. In a semi-aqueous (MeOH/HEPES) system, LH displayed a characteristic chromogenic change from colorless to yellow upon adding Cu2+ ion, with the appearance of a new peak at λmax = 460 nm. A 1:1 binding stoichiometry between LH and Cu2+ ion has been found, with LOD = 2.3 μM (145 ppb) and LOQ = 8 μM (504 ppb). Based on experimental results the formula of [Cu(L)Cl(H2O)2] (1) was assigned and this in-situ generated 1 was found to exhibit a discoloration of upon gradual addition of cysteine (LOD = 60 nM) as well as ATP (LOD = 130 nM) having 1:2 and 1:1 stoichiometry respectively. The LH was useful for recognition of Cu2+ ion in real water samples and on filter paper strips. A two-input-two-output logic gate circuitry was also constructed by employing 1 and cysteine. The DFT/TDDFT calculations performed on LH and 1 were consistent with experimental findings. The binding affinity of LH towards HSA and BSA were determined with HSA having greater affinity than BSA, which was also supported by theoretical calculations.

Diethylaminophenol appended pyrimidine bis hydrazone for the sequential detection of Al3+ and PPi ions

In this study, a novel easy-to-prepare diethylaminophenol appended pyrimidine bis hydrazone (HD) has been designed and developed. The probe exhibits excellent sequential sensing characteristics towards Al3+ and PPi ions. The emission studies, various spectroscopic techniques and lifetime results have been utilized to understand the binding mechanism of HD with Al3+ ions and, to discover the specificity as well as the efficacy of the probe in sensing Al3+ ions. The good association constant in addition to the lower detection limit values makes the probe effective for the detection of Al3+. The in-situ produced HD-Al3+ ensemble could consecutively detect PPi via a turn-off fluorescence response and the selectivity and sensitivity characteristics of the generated ensemble towards PPi were described based on the demetallation approach. The overall sensing property of HD was perfectly employed for constructing logic gates, real water, and tablet applications. Paper strips, as well as cotton-swab experiments, were also conducted inorder to check the practical utility of the synthesized probe.

Designing of efficient two-armed colorimetric and fluorescent indole appended organosilicon sensors for the detection of Al(III) ions: Implication as paper-based sensor

Metal ions have significant roles in diagnosis, industry, human health, and the environment. To design and develop new lucid molecular receptors for the selective detection of metal ions is important for environmental and medical applications. In the present work, two-armed indole appended Schiff bases conjoined with 1,2,3-Triazole bis-organosilane and bis-organosilatrane skelton sensors for naked eye colorimetric and fluorescent detection sensors for Al(III) are developed. The introduction of Al(III) in sensor 4 and 5 show red shift in UV-visible spectra, changes in fluorescence spectra and immediate color change from colorless to dark yellow. Furthermore, the pH and time response studies were explored for both sensors 4 & 5. The sensors 4 and 5 exhibited significantly low detection limit (LOD) in nano-molar range 1.41 × 10-9 M and 0.17 × 10-9 M respectively from emission titration. The LOD form absorption titration was found to be 0.6 × 10-7 M for sensor 4 and 0.22 × 10-7 M for sensor 5. In addition, the sensing model is developed as paper based sensor for its practical applicability. The theoretical calculations were performed on Gaussian 03 program by relaxing the structures using Density functional theory.

Triphenylamine-Functionalized Coordination Cage as a Supramolecular Fluorescence Sensor for Sequential Detection of Aluminum Ions and Nitrofurantoin

Coordination cages with a well-defined nanocavity are a class of promising supramolecular materials for molecular recognition and sensing. However, their applications in sequential sensing of multiple types of pollutants are highly desirable yet extremely limiting and challenging. Herein, we demonstrate a convenient strategy to develop a supramolecular fluorescence sensor for sequentially detecting environmental pollutants of aluminum ions and nitrofurantoin. A coordination cage (Ni-NTB), adopting an octahedral structure with triphenylamine chromophores occupying on the faces, is weakly emissive in solution due to the intramolecular rotations of the phenyl rings. Ni-NTB exhibits sensitive and selective fluorescence "off-on-off" processes during consecutive sensing of Al³⁺ and nitrofurantoin, an antibacterial drug. These sequential detection processes are highly interference-tolerant and visually observable with the naked eye. Mechanism studies reveal that the fluorescence switch is controllable by tuning the degree of intramolecular rotations of the phenyl rings and the pathway of intermolecular charge transfer, which is associated with the host-guest interaction. Moreover, the fabrication of Ni-NTB on test strips enabled a quick naked-eye sequential sensing of Al³⁺ and nitrofurantoin in seconds. Hence, this novel supramolecular fluorescence "off-on-off" sensing platform provides a new approach to developing supramolecular functional materials for monitoring environmental pollution.

A Selective and ''Off-On'' Fluorescent Chemosensor Based on Fluorescein for Al3+: Synthesis, Characterization, Spectroscopy Analyses, and DFT Calculation

An efficient fluorescent cation chemosensor based on fluorescein L4 was well prepared and identified with spectroscopy analyses. UV-vis and fluorescence measurements examined the analyte complexation of the L4 with various cations, demonstrating a clear tendency to Al³⁺ ion. In the Job plot study, a stoichiometry ratio of a complex between L4 and Al³⁺ ion was determined to be 1: 2 (L4: Al³⁺). A stoichiometry ratio of complex between L4 and Al³⁺ ion was determined to be 1: 2 (L4: Al³⁺) using the Job plot. The association constant (K_a) of the L4-Al³⁺ complex was found 2.8 × 10⁷ M^-2. The obtained limit of detection (LOD) value (1.37 × 10^-6 M for Al³⁺) exhibited the considerable sensitivity of the chemosensor L4 to Al³⁺ ion. DFT/TD-DFT calculations have also been employed to support the binding mode and photophysical properties of the complexation of chemosensor L4 to Al³⁺ ion and also to investigate the enhancement of L4 fluorescence by Al³⁺ ion.

Colorimetric Detection of ATP by a Chlorophosphonazo III -based Mg2+ Complex in Aqueous Solution via Indicator Displacement Approach

A simple and effective colorimetric detection of adenosine 5-triphosphate (ATP) in 100% aqueous media was developed based on an indicator displacement approach (IDA). A commercially available dye, Chlorophosphonazo III (CPA), was utilized as the indicator and the ATP detection was achieved using the complex of CPA with Mg²⁺ in a 2:1 stoichiometric ratio (CPA₂-Mg²⁺) through the regeneration of CPA by the binding of ATP to Mg²⁺. Upon addition of a series of anions to the CPA₂-Mg²⁺ complex, only the appearance of the solution of the complex with ATP exhibited a color change from blue to purple which can be detected by the naked eye. Moreover, the ATP recognition was not hampered by the presence of other anions. Hence, CPA₂-Mg²⁺ is efficient in ATP highly selective and sensitive colorimetric detection in 100% aqueous media.

Efficient fluorescent recognition of ATP/GTP by a water-soluble bisquinolinium pyridine-2,6-dicarboxamide compound. Crystal structures, spectroscopic studies and interaction mode with DNA

The new dicationic pyridine-2,6-dicarboxamide-based compound 1 bearing two N-alkylquinolinium units was synthesized, structurally determined by single-crystal X-ray diffraction, and studied in-depth as a fluorescent receptor for nucleotides and inorganic phosphorylated anions in pure water. The addition of nucleotides to 1 at pH = 7.0 quenches its blue emission with a selective affinity towards adenosine 5'-triphosphate (ATP) and guanosine 5'-tripohosphate (GTP) over other nucleotides such CTP, UTP, ADP, AMP, dicarboxylates and inorganic anions. On the basis of the spectroscopic tools (1H, 31P NMR, UV-vis, fluorescence), MS measurements and DFT calculations, receptor 1 binds ATP with high affinity (log K = 5.04) through the simultaneous formation of strong hydrogen bonds and π-π interactions between the adenosine fragment and quinolinium ring with binding energy calculated in 8.7 kcal mol-1. High affinity for ATP/GTP is attributed to the high acidity of amides and preorganized rigid structure of 1. Receptor 1 is an order of magnitude more selective for ATP than GTP. An efficient photoinduced electron transfer quenching mechanism with simultaneous receptor-ATP complexation in both the excited and ground states is proposed. Additionally, multiple spectroscopic studies and molecular dynamics simulations showed that 1 can intercalate into DNA base pairs.

A new naphthalimide-picolinohydrazide derived fluorescent "turn-on" probe for hypersensitive detection of Al3+ ions and applications of real water analysis and bio-imaging

The development of high-selective chemosensors for trace Al³⁺ detection in the ecosystem is crucially importance due to its detrimental effects. In this work, a simple Schiff-base fluorescent probe NPP derived from naphthalimide and picolinohydrazide was rationally designed and prepared for efficient detection of Al³⁺. NPP exhibited prominent sensing behaviors toward Al³⁺ with low detection limit (LOD) (39 nM), rapid response time (1 min), strong binding affinity (4.02 × 10⁴), good anti-interference characteristics and visual detection. Binding ratio of NPP-Al³⁺ complex was determined to be 1:1 by Job's plot analysis. In addition, the chelation mechanism of NPP with Al³⁺ ions was proposed and substantiated by the density functional theory (DFT) and time-dependent density functional theory (TD-DFT), IR spectrum and ¹H NMR titration experiments. Furthermore, this "signal-on" probe NPP was efficiently utilized as a promising indicator for Al³⁺ detection in environmental and biological samples.

A dimedone-phenylalanine-based fluorescent sensor for the detection of iron (III), copper (II), L-cysteine, and L-tryptophan in solution and pharmaceutical samples

The development of fluorescence molecules for the fast and effective detection of L-tryptophan (L-Trp) has attracted a lot of attention because it is an important amino acid for baby growth, nitrogen equilibrium in adults, improving sleep, and mood regulation. A dimedone-phenylalanine-based chiral sensor (SDPA) was synthesized and exhibited a strong fluorescence quenching by Fe³⁺ and Cu²⁺ in a water/DMSO (3/7) solution with a detection limit of 2.29 × 10^-6 M and 6.37 × 10^-6 M, respectively. The factors affecting fluorescence sensings, such as the pH and competing cations, were studied. The sensor can be reused at least five times after being treated with EDTA. The Job plot, ESI-MS spectra, ¹H NMR spectra, absorbance, and fluorescence titration experiments were investigated to study the mechanism of SDPA-Fe³⁺ and SDPA-Cu²⁺ complexation. The SDPA-Cu²⁺ complex can detect L-tryptophan and L-cysteine at trace levels by turn-on fluorescence with a detection limit of 9.35 × 10^-6 M and 8.86 × 10^-6 M, respectively. Moreover, applying the SDPA-Cu²⁺ complex for quantitative analysis of L-tryptophan in real sleep-improving capsules resulted in good recovery. The L-tryptophan level of the Elining capsule was determined at 190.8 ± 10.5 mg/g (mg L-tryptophan/g medicine), which is close to the announced quantity of 180 mg/g. Besides, the SDPA-Cu²⁺ complex can selectively detect free L-Try molecules and L-Try residues in proteins.

Real time sensor for Fe3+, Al3+, Cu2+ & PPi through quadruple mechanistic pathways using a novel dipodal quinoline-based molecular probe

A quinoline-based small molecular probe, H₂L was designed, synthesized and characterized by different spectroscopic methods. It was utilized as a multi-responsive probe for the detection of Fe³⁺, Al³⁺, Cu²⁺ and PPi. It showed very selective instant turn-on fluorimetric response towards Fe³⁺and Al³⁺ with a detection limit in nanomolar range. Solutions of H₂L containing Fe³⁺ or Al³⁺ could sequentially sense PPi by a turn-off mechanism. Also, H₂L could determine the presence of Cu²⁺ very selectively among a series of other metal ions by a sharp change in colour. Detection of Cu²⁺ through colorimetry was further investigated by systematic UV-Vis studies and the potential of H₂L to act as a potential colorimetric sensor for Cu²⁺ was suitably established. Filter-paper strip experiments were conducted to demonstrate the practical utility of the proposed sensor. Potential applications of H₂L as a sensor for pH in the acidic range has also been explored.

A simple hydrazone probe for recognition of Al3+ and PPi and its applicability in lysosomal imaging

A simple hydrazone probe (1) was designed and synthesized for the successive detection of Al³⁺ and pyrophosphate (PPi) in almost 100% buffer environment. The probe provided O₂N donor set for chelation with Al³⁺, leading to a distinct fluorescence boost at 510 nm. The in-situ formed 1-Al³⁺ complex detected PPi with an "on-off" behavior. The detection limits for Al³⁺ and PPi were 35.7 nM and 76 nM, respectively. Benefiting from the existence of morpholine as lysosome-targeting group, probe 1 was successfully applied to the detection of Al³⁺ and PPi in lysosomes.

An "off-on-off" fluorescence chemosensor for the sensitive detection of Cu2+ in aqueous solution based on multiple fluorescence emission mechanisms

A new organosiloxane precursor ((E)-3-hydroxy-4-((2-(2-hydroxy-4-(3-(3-(triethoxysilyl)propyl)ureido)benzoyl)hydrazono)methyl)phenyl(3-(triethoxysilyl)propyl)carbamate, hereinafter referred to as AHBH-Si) and tetraethylorthosilicate (TEOS) were mixed as the mixed Si source, and bridged periodic mesoporous organic silica (AHBH-PMOs) nanoparticles were obtained through the co-condensation reaction. AHBH-PMO nanoparticles possess mechanisms of "Aggregation Induced Emission" (AIE) and "Intramolecular Charge Transfer" (ICT), which originate from the molecular structure of AHBH having "C[double bond, length as m-dash]N" bond, ortho hydroxyl groups, etc.. Therefore, the optical properties of AHBH are excellent with respect to the solvent effect and enhanced fluorescence. For hybrid materials, the silica framework provides a rigid environment that restricts the rotation of AHBH, thereby turning on the fluorescence of AHBH due to the regulation by the AIE effect. In particular, AHBH-PMOs are no longer restricted by organic solvents and could really achieve the response to Cu2+ with high sensitivity and selectivity in aqueous solutions of a wide pH range. In addition, the detection limit is as low as 3.26 × 10-9 M. Methods such as Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, and high-resolution mass spectrometry have shown the coordination interaction between AHBH and Cu2+. The Gaussian 09 software of density functional theory to calculate the reducing changes of energy gaps among AHBH and AHBH-Si before and after the addition of Cu2+ showed that coordination interaction exists in the system. These results indicate that AHBH-PMO hybrid materials have potential applications in the field of environmental monitoring.

Selective sensing of PPi by fluorogenic Al(III)-probe complex in aqueous medium

A newly designed Schiff base probe JN has been synthesized. It is highly selective and sensitive towards Al³⁺ in nearly 100% aqueous medium by exhibiting a dramatic "turn-on" fluorescence response at 495 nm (λ_ex = 450 nm). The sensing mechanism of JN towards Al³⁺ ions was proposed as the combination of PET, ICT, ESIPT, and CHEF processes according to spectra studies and theory calculations. The in situ generated mononuclear Al(III) complex JN-Al³⁺ could sequentially detect PPi ions by turn-off fluorescence response. The selectivity and sensitivity of the JN-Al³⁺ complex towards PPi ions are based on demetalization process. Interestingly, the fact that Al³⁺ can bind with 1, 2, or 3 PPi has been revealed by HRMS study. The probes JN and JN-Al³⁺ complexes were able to capture Al³⁺ and PPi ions, respectively, as demonstrated by fluorescence imaging of the adult zebrafish and onion inner epidermal cells samples.

Schiff base-functionalized silatrane-based receptor as a potential chemo-sensor for the detection of Al3+ ions

Excess Al³⁺ ions are considered toxic to living organisms.