A near-infrared fluorogenic probe with fast response for detecting sodium dithionite in living cells

Fast detection of sodium dithionite in sugar using a xanthylium-based fluorescent probe

Dithionite remained in the foodstuff may pose a great threat to the health of consumers. Three xanthylium-based probes were synthesized and their responses to dithionite were explored. Probe SH-1 could respond to dithionite selectively in PBS buffer (15% DMSO, 10 mM, pH = 7.4). Upon the addition of dithionite, the fluorescent emission of SH-1 at 684 nm dropped quickly (within 10 s) and the fluorescence decline was proportional to the concentration of dithionite (0-7.0 μM). The limit of detection was determined to be 0.139 μM. Then, the sensing mechanism was tentatively presented and the structure of resulted adduct (SH-1-SO3-) which was the reaction product of SH-1 and dithionite via a Micheal addition reaction followed by an oxidation reaction was verified. Moreover, white granulated sugar was subjected to the standard spike experiments and the results demonstrated a great potential of SH-1 for the quantitative monitoring of dithionite in foodstuffs.

Accelerated Activity-Based Sensing by Fluorogenic Reporter Engineering Enables to Rapidly Determine Unstable Analyte

Accurate detection of labile analytes through activity based fluorogenic sensing is meaningful but remains a challenge because of nonrapid reaction kinetic. Herein, we present a signaling reporter engineering strategy to accelerate azoreduction reaction by positively charged fluorophore promoted unstable anion recognition for rapidly sensing sodium dithionite (Na2S2O4), a kind of widespread used but harmful inorganic reducing agent. Its quick decomposition often impedes application reliability of traditional fluorogenic probes in real samples because of their slow responses. In this work, four azo-based probes with different charged fluorophores (positive, zwitterionic, neutral, and negative) were synthesized and compared. Among of them, with sequestration effect of positively charged anthocyanin fluorophore for dithionite anion via electrostatic attraction, the cationic probe Azo-Pos displayed ultrafast fluorogenic response (∼2 s) with the fastest response kinetic (kpos' = 0.373 s-1) that is better than other charged ones (kzwi' = 0.031 s-1, kneu' = 0.013 s-1, kneg' = 0.003 s-1). Azo-Pos was demonstrated to be capable to directly detect labile Na2S2O4 in food samples and visualize the presence of Na2S2O4 in living systems in a timely fashion. This new probe has potential as a robust tool to fluorescently monitor excessive food additives and biological invasion of harmful Na2S2O4. Moreover, our proposed accelerating strategy would be versatile to develop more activity-based sensing probes for quickly detecting other unstable analytes of interest.

Rational design of an iminocoumarin-based fluorescence probe for peroxynitrite with high signal-to-noise ratio

As a high reactive oxygen species (ROS) and a reactive nitrogen species (RNS), peroxynitrite anion (ONOO- ) is widely present in organisms and plays influential roles in physiological and pathological processes. It is of great significance to develop effective fluorescent probes for imaging peroxynitrite variation in living systems. Herein we present a novel fluorescent probe TQC0 for monitoring ONOO- based on the iminocoumarin platform, and this probe was synthesized by the knoevenagel condensation between a dihydropyridine-salicylaldehyde derivative and 2-benzothiazole-acetonitrile, and subsequently masked with the boronate moiety. The obtained probe TQC0 exhibited a high signal-to-noise ratio (206-fold) and a quick 'turn-on' response (about 10 min) with great selectivity and sensitivity. Furthermore, the probe TQC0 was successfully applied for imaging ONOO- in living cells with low cytotoxicity.

A novel turn-on fluorescent probe for detection of pH in extremely acidic environment and its application

A water-soluble turn-on fluorescent probe PNAP for pH has been designed and synthesized. PNAP was consist of pyrene as fluorophore and morpholine as receptor. Owing to the photoinduced electron transfer (PET) effect, the fluorescence of PNAP was quenched, while PNAP exhibited a remarkable "turn-on" fluorescence with the increase of acidity. Notably for its pKa of 2.15, PNAP was one of the pH fluorescent probes used in extremely acidic environments. Furthermore, PNAP also displayed good repeatability, strong anti-ion interference ability, high sensitivity and selectivity toward pH. In addition, PNAP has been successfully applied to the test strips and monitor the pH of environment water samples and realistic samples, showing its good promising prospect.

Three birds, one stone: Disinfecting and turning waste medical masks into valuable carbon dots for sodium hydrosulfite and Fe3+ detection enabled by a simple hydrothermal treatment

Disposable medical masks are widely used to prevent respiratory infections due to their ability to block virus particles from entering the human body. The coronavirus disease 2019 (COVID-19) pandemic highlighted the importance of medical masks, leading to their widespread use around the world. However, a large number of disposable medical masks have been discarded, some carrying viruses, which have posed a grave threat to the environment and people's health, as well as wasting resources. In this study, a simple hydrothermal method was used for the disinfection of waste medical masks under high-temperature conditions as well as for their transformation into high-value-added carbon dots (CDs, a new type of carbon nanomaterial) with blue-emissive fluorescence, without high energy consumption or environmental pollution. Moreover, the mask-derived CDs (m-CDs) could not only be used as fluorescent probes for sensing sodium hydrosulfite (Na₂S₂O₄), which is widely used in the food and textile industries but is seriously harmful to human health, but also be used for detecting Fe³⁺ which is harmful to the environment and human health due to its wide use in industries.

Acceptor Planarization and Donor Rotation: A Facile Strategy for Realizing Synergistic Cancer Phototherapy via Type I PDT and PTT

Tumor hypoxia seriously impairs the therapeutic outcomes of type II photodynamic therapy (PDT), which is highly dependent upon tissue oxygen concentration. Herein, a facile strategy of acceptor planarization and donor rotation is proposed to design type I photosensitizers (PSs) and photothermal reagents. Acceptor planarization can not only enforce intramolecular charge transfer to redshift NIR absorption but also transfer the type of PSs from type II to type I photochemical pathways. Donor rotation optimizes photothermal conversion efficiency (PCE). Accordingly, three 3,6-divinyl-substituted diketopyrrolopyrrole (DPP) derivatives, 2TPAVDPP, TPATPEVDPP, and 2TPEVDPP, with different number of rotors were prepared. Experimental results showed that three compounds were excellent type I PSs, and the corresponding 2TPEVDPP nanoparticles (NPs) with the most rotors possessed the highest PCE. The photophysical properties of 2TPEVDPP NPs are particularly suitable for in vivo NIR fluorescence imaging-guided synergistic PDT/PTT therapy. The proposed strategy is helpful for exploiting type I phototherapeutic reagents with high efficacy for synergistic PDT and PTT.

Golgi-Targeting Fluorescent Probe for Monitoring CO-Releasing Molecule-3 In Vitro and In Vivo

CO-releasing molecule-3 (CORM-3), mainly metal carbonyl compounds, is widely used as experimental tools to deliver CO, a biological "gasotransmitter", in mammalian systems. CORM-3 is also proposed as a potential new antimicrobial agent, which kills bacteria effectively and rapidly in vitro and in animal models. Organelle-targeting therapy, as a highly effective therapeutic strategy with little toxic and side effects, has important research significance and development prospects. Therefore, the development of effective methods for detecting and tracking CORM-3 at the subcellular level has important implications. In this paper, an easily available Golgi-targetable fluorescent probe (Golgi-Nap-CORM-3) was proposed for CORM-3 detection. In the probe Golgi-Nap-CORM-3, the phenyl sulfonamide group was selected as the Golgi-targetable unit, naphthalimide dye was chosen as a fluorophore, and the nitro group was selected as a CORM-3-responsive unit. Golgi-Nap-CORM-3 shows a CORM-3-reponsive increase of fluorescence emission at 520 nm. Using the excellent probe, the change of CORM-3 in HeLa cells, HepG2 cells, and zebrafish is successfully monitored. This study demonstrates very important information for the study of CORM-3 in vivo systems.

Recent Progresses in NIR-I/II Fluorescence Imaging for Surgical Navigation

Cancer is still one of the main causes of morbidity and death rate around the world, although diagnostic and therapeutic technologies are used to advance human disease treatment. Currently, surgical resection of solid tumors is the most effective and a prior remedial measure to treat cancer. Although medical treatment, technology, and science have advanced significantly, it is challenging to completely treat this lethal disease. Near-infrared (NIR) fluorescence, including the first near-infrared region (NIR-I, 650-900 nm) and the second near-infrared region (NIR-II, 1,000-1,700 nm), plays an important role in image-guided cancer surgeries due to its inherent advantages, such as great tissue penetration, minimal tissue absorption and emission light scattering, and low autofluorescence. By virtue of its high precision in identifying tumor tissue margins, there are growing number of NIR fluorescence-guided surgeries for various living animal models as well as patients in clinical therapy. Herein, this review introduces the basic construction and operation principles of fluorescence molecular imaging technology, and the representative application of NIR-I/II image-guided surgery in biomedical research studies are summarized. Ultimately, we discuss the present challenges and future perspectives in the field of fluorescence imaging for surgical navigation and also put forward our opinions on how to improve the efficiency of the surgical treatment.

Self-Immolative Dye-Doped Polymeric Probe for Precisely Imaging Hydroxyl Radicals by Avoiding Leakage

For sensing low abundance of biomarkers, utilizing nanocarriers to load dyes is an efficient method to amplify the detected signal. However, the non-specific leak of the internal dyes in this approach is accompanied by false positive signals, resulting in inaccurate signal acquirement. To address this issue, in this work, we reported a novel signal amplification strategy with dye as a scaffold to construct a self-immolative dye-doped polymeric probe (SDPP). In our proposed approach, the dyes were covalently integrated into the main chain of a polymer, which can avoid the non-specific leak of the dye when used in a rigorous biological environment, thus evading the false positive signal. As a prototype of this concept, a SDPP, which responds to hydroxyl radicals (^•OH), was rationally fabricated. Upon being activated by ^•OH, SDPP will liberate the dye through a self-immolative reaction to bind with protein for amplifying the fluorescence signal. Compared with a dye-loaded nanoprobe, SDPP can precisely track intracellular basal ^•OH levels and visualize the ^•OH associated with myocarditis in vivo. More importantly, the attempt in this work not only provides an effective molecular tool to investigate the role of ^•OH in cardiopathy, but also puts forward a new direction to current signal-amplifying strategies for precisely and reliably acquiring the intracellular molecular information.

Snowflake-like DNA crystals templated Cu clusters as a fluorescent turn-on probe for sensing actin

Herein, we synthesized snowflake-like DNA crystals (SDC) via hybridization chain reaction and used it for the first time in the synthesis of copper nanoclusters with enhanced fluorescence. Atomic force microscopy (AFM) and laser confocal microscopy characterization confirmed that SDC/CuNCs are self-assembled successfully on SDC. Aggregation induced emission allows SDC/CuNCs to exhibit better stability and stronger emission intensity. Thus, we developed the "turn-on" label-free fluorescence detection method of actin based on SDC/CuNCs which offer simplicity, low cost, good selectivity, and high sensitivity. The detection limit was determined to be 0.0124 μg mL^-1, which was an order of magnitude lower than that of reported fluorescent methods (0.12 μg mL^-1). Compared with previous method, the linear range is also much wider. We also performed standard recovery experiments in actual samples for evaluating the practicality of this strategy and proved that the capability of the proposed approach for the determination of actin is feasible and the interference from complex biological samples is negligible. These results indicate that SDC/CuNCs are expected to play a more important role in the field of biosensors.

Photoactivatable Red Chemiluminescent AIEgen Probe for In Vitro/Vivo Imaging Assay of Hydrazine

Here, we have developed a novel photoactivatable red chemiluminescent AIEgen probe (ACL), based on the combination of the red-emission AIEgen fluorophore (TPEDC) that shows excellent singlet oxygen (¹O₂)-generation ability and the precursor of Schaap's dioxetane (the linker connected to adamantane is the C═C bond) that can be modified to target various analytes, for in vitro and in vivo measurement of hydrazine. Prior to applying for sensing detection, the C═C bond connected to adamantane in ACL was first converted into dioxetane by irradiation to form the activated chemiluminescent AIEgen probe (ACLD). Then, the self-immolative reaction was triggered upon the deprotection of the acylated phenolic hydroxyl group in ACLD in the presence of hydrazine, resulting in the release of the high energy held in the 1,2-dioxetanes, and then, the chemiexcitation was triggered, thereby producing red chemiluminescence through the intramolecular chemiluminescence resonance energy transfer from Schaap's dioxetane to TPEDC. This chemiluminescent AIEgen probe was evaluated in a clean buffer environment as well as using living cells and mouse models.

Design and Engineering of Hypoxia and Acidic pH Dual-Stimuli-Responsive Intelligent Fluorescent Nanoprobe for Precise Tumor Imaging

Stimulus-responsive fluorescence imaging modality shows great promise for detection of tumor due to the advantages of high sensitivity, simplicity and noninvasiveness. However, some non-cancer regions including nodules and inflammation may also exhibit a stimulus-related characteristic, which cause the problem of nonspecific responsiveness and then cause "false positive" results for tumor recognition. Herein, hypoxia and acidic pH, two typical features strongly associated with tumor invasion, progression and metastasis in tumor microenvironment (TME), are chosen as dual stimuli to fabricate "dual lock-and-key" fluorescent nanoprobe for highly specific and precise imaging of tumor cells. Mesoporous silica coated gold nanorods (AuNR@mSiO₂ ) are employed as nanocarrier and nanoquencher to load the pH-sensitive fluorescent reporter (Rho-TP). Azobenzene (azo) which can be reduced to amines by the highly expressed azoreductase under hypoxic conditions, is elected as the effective gatekeeper for AuNR@mSiO₂ by forming complex with β-cyclodextrin polymer via host-guest interaction (azo/β-CDP). By elaborately combining the hypoxia-responsive gatekeeper and pH-responsive fluorescent signal reporter into one nanoprobe, sensitive and specific imaging of tumor cells can be realized. The fabricated dual lock-and-key fluorescent nanoprobe successfully further apply in tumor-bearing mice model, which indicate potential of early diagnosis and assessment of cancer treatment.

Ultralong and Color-Tunable Room-Temperature Phosphorescence Based on Commercial Melamine for Anticounterfeiting and Information Recognition

Advances have been made in the research on color-tunable organic ultralong room-temperature phosphorescence (OURTP) materials. Due to the high cost of raw materials, complex and strict synthesis conditions, and low yields, it is hard to obtain cheap commercial OURTP materials within a short time. Therefore, it is of practical significance to research and develop new OURTP functions based on commercialized organic materials. In this study, the OURTP characteristics of melamine (MEL), a kind of commercially available, cheap, and pure organic material, were investigated and explored. MEL was found with color-tunable and excellent OURTP, the average lifetime can reach 0.74 s, and the phosphorescence quantum yield can reach 17%. Since the ratio of molecular phosphorescence of MEL to the ultralong phosphorescence mediated by H-aggregation differs with the excitation wavelength and their luminescence life spans are also different, the color of OURTP materials is dependent on both excitation wavelength and time. Moreover, the OURTP characteristics of MEL can be utilized in anticounterfeiting and information identification.

Real-Time Monitoring Mitochondrial Viscosity during Mitophagy Using a Mitochondria-Immobilized Near-Infrared Aggregation-Induced Emission Probe

Mitophagy plays a crucial role in maintaining intracellular homeostasis through the removal of dysfunctional mitochondria and recycling their constituents in a lysosome-degradative pathway, which leads to microenvironmental changes within mitochondria, such as the pH, viscosity, and polarity. However, most of the mitochondrial fluorescence viscosity probes only rely on electrostatic attraction and readily leak out from the mitochondria during mitophagy with a decreased membrane potential, thus easily leading to an inaccurate detection of viscosity changes. In this work, we report a mitochondria-immobilized NIR-emissive aggregation-induced emission (AIE) probe CS-Py-BC, which allows for an off-on fluorescence response to viscosity, thus enabling the real-time monitoring viscosity variation during mitophagy. This system consists of a cyanostilbene skeleton as the AIE active core and viscosity-sensitive unit, a pyridinium cation for the mitochondria-targeting group, and a benzyl chloride subunit that induces mitochondrial immobilization. As the viscosity increased from 0.903 cP (0% glycerol) to 965 cP (99% glycerol), CS-Py-BC exhibited an about 92-fold increase in fluorescence intensity at 650 nm, which might be attributed to the restriction of rotation and inhibition of twisted intramolecular charge transfer in a high viscosity system. We also revealed that CS-Py-BC could be well immobilized onto mitochondria, regardless of the mitochondrial membrane potential fluctuation. Most importantly, using CS-Py-BC, we have successfully visualized the increased mitochondrial viscosity during starvation or rapamycin-induced mitophagy in real time. All these features render CS-Py-BC a promising candidate to investigate mitophagy-associated dynamic physiological and pathological processes.

A novel copper ion sensing fluorescent probe for fast detection of pyrophosphate and alkaline phosphatase

A Cu²⁺ sensing fluorescent probe is synthesized via a Mannich reaction and is applied in the fluorescence detection of pyrophosphate and alkaline phosphatase.