Benzoindole-based bifunctional ratiometric turn-on sensor with an ICT effect for trapping of H+ and Al3+ in dual-channel cell imaging and samples

Photo-induced time-dependent controllable wettability of dual-responsive multi-functional electrospun MXene/polymer fibers

Switchable wettability potential in smart fibers is of paramount importance in various applications. Light-induced controllable changes in surface wettability have a significant role in this area. Herein, smart waterborne homopolymer, functional copolymer with different polarity and flexibility, and multi-functional terpolymer particles containing a time-dependent dual-responsive acrylated spiropyran, as a polymerizable monomer, were successfully synthesized through eco-friendly single-step emulsifier-free emulsion polymerization. Presence of 10 wt% of butyl acrylate and dimethylaminoethyl methacrylate relative to methylmethacrylate as functional comonomers decreased the Tg of the samples almost 20 ℃ and increased their polarity. The optical properties of the particles were investigated, and the UV-vis and fluorescence spectroscopy results showed that not only polarity and flexibility of the polymer chains may have a positive effect on improving the optical properties, but also the simultaneous presence of functional groups has a synergistic effect. The smart polymer particles with flexibility and polarity features exhibited higher absorption and emission compared to other samples. Inspired by these findings, multi-functional smart polymer fibers were prepared using the electrospinning method. The smart multi-functional electrospun fibers containing few-layer Ti3C2 MXenes were synthesized to improve the fibers' properties and change the surface wettability due to the hydrophilic functional groups of MXene. Field-emission scanning electron microscopy images displayed the successful preparation of few-layer MXenes. Smooth and bead-free fibers with bright red fluorescence emission under UV irradiation were shown using fluorescence microscopy. The study on the surface wettability of fibers revealed that UV and visible light irradiation induced reversible time-dependent changes in the wettability of the smart multi-functional MXene/polymer electrospun fibers from hydrophobic to hydrophilic, reaching a water contact angle of 10° from an initial water contact angle of 100° under UV light and also changing to superhydrophilic state with passing time. Upon visible light exposure, the fibers returned to their original state. Furthermore, the fibers demonstrated a high stability over five alternating cycles of UV and visible light irradiation. This study shows that the fabrication of time-dependent smart fibers, utilizing the flexibility and polarity in the presence of MXenes, significantly improves and controls surface wettability changes. The outstanding dynamically photo-switchable wettability of these fibers may offer exciting opportunities in various applications, especially in the separation of oil from water contaminants.

A review of advanced helical fibers: formation mechanism, preparation, properties, and applications

As a unique structural form, helical structures have a wide range of application prospects. In the field of biology, helical structures are essential for the function of biological macromolecules such as proteins, so the study of helical structures can help to deeply understand life phenomena and develop new biotechnology. In materials science, helical structures can give rise to special physical and chemical properties, such as in the case of spiral nanotubes, helical fibers, etc., which are expected to be used in energy, environment, medical and other fields. The helical structure also has unique charm and application value in the fields of aesthetics and architecture. In addition, helical fibers have attracted a lot of attention because of their tendrils' vascular geometry and indispensable structural properties. In this paper, the development of helical fibers is briefly reviewed from the aspects of mechanism, synthesis process and application. Due to their good chemical and physical properties, helical fibers have a good application prospect in many fields. Potential problems and future opportunities for helical fibers are also presented for future studies.

Synthesis and photo-induced anticancer activity of new 2-phenylethenyl-1H-benzo[e]indole dyes

Herein, a series of new 1,1,2-trimethyl-1H-benzo[e]indole dyes was prepared via Knoevenagel condensation reaction between 1,1,2-trimethyl-1H-benzo[e]indole and benzaldehydes, and characterized using various spectroscopic methods. The obtained compounds showed cytotoxic properties in G361 melanoma cell line upon irradiation with 414 nm blue light at submicromolar doses. The mechanism of action of the most potent compound 15 was further investigated. The treatment induced substantial generation of reactive oxygen species, leading to DNA damage followed by cell death depending on the concentration of the photosensitizer compound and the irradiation intensity.

Structural characterization and anti-inflammatory activities of a purified polysaccharide from fruits remnants of Alpinia zerumbet (Pers.) Burtt. et Smith

We reported here an interesting source of Alpinia zerumbet Polysaccharides (named AZPs) from the residues after extracting essential oil by steam distillation from Alpinia zerumbet fructus. After a series of purifications, a homogeneous polysaccharide (AZP-2) of molecular weight 1.25 × 105 Da was obtained. Structure, anti-inflammatory activity, and anti-inflammatory mechanism were investigated. AZP-2 was mainly composed of galactose, arabinose, xylopyranose, glucose, and galacturonic acid. The main linkage structure of AZP-2 was determined after integrating the nuclear magnetic resonance (NMR) and methylation analysis, and the structure was comparatively complex. The results indicated that AZP-2 significantly decreased the production of NO and ROS in the inflammatory model established by lipopolysaccharide (LPS) stimulated RAW264.7, particularly at the concentration of 200 μg/mL. Furthermore, AZP-2 significantly modulated the secretion of both pro-inflammatory and anti-inflammatory cytokines. Notably, the mechanism of AZP-2 exhibiting inhibitory effects was related to regulating the NF-κB signaling pathway. Overall, AZP-2 could be used as a potential anti-inflammatory agent for further in-depth studies.

Highly sensitive and specific detection of Ni2+ using a novel fluorometric probe in the DMSO-H2O system

The rapid detection of Ni ions has important research and application value. This paper presents a novel specific turn-off fluorescence probe PCTMP-FS for detecting Ni2+ ions. The carbazole-based compound PCTMP is first synthesized via a two-step reaction. PCTMP-FS comprises PCTMP dispersed into a DMSO-H2O (fw = 30% v/v) mixed solvent. The probe demonstrates prominent selectivity and anti-interference abilities for detecting Ni2+ with a limit of detection (LOD) of 0.233 μM. The probe exhibits good applicability over a wide range of acidities. The detecting mechanism of the probe is due to the complex formed by PCTMP and Ni2+ (2:1), which destroys intramolecular charge transfer in the compound. The probe has good repeatability and demonstrates excellent stability and sensitivity for the detection of Ni2+ in real water samples.

Nanocellulose-based nanogenerators for sensor applications: A review

With the rapid development of the Internet of Things, nanogenerator as a green energy collection technology has attracted great attention in various fields. Specifically, the natural renewable nanocellulose as a raw material can significantly improve the environmental friendliness of the nanocellulose-based nanogenerators, which also makes the nanocellulose based nanogenerators expected to further develop in areas such as wearable devices and sensor networks. This paper mainly reports the application of nanocellulose in nanogenerator, focusing on the sensor. The types, sources and preparation methods of nanocellulose are briefly introduced. At the same time, the special structure of nanocellulose highlights the advantages of nanocellulose in nanogenerators. Then, the application of nanocellulose-based nanogenerators in sensors is introduced. Finally, the future development prospects and shortcomings of this nanogenerator are discussed.

Yolk-shell composite optical sensors with chiral L-histidine/Rhodamine 6G for high-sensitivity "turn-on" detection of L-proline

Chirality is a ubiquitous phenomenon in nature and has attracted wide attention in the biomedicine, pharmaceutics and biosensing research fields. Enantiomeric recognition of chiral compounds, especially chiral drugs and chiral amino acids, is important for human health and nutrition. In this work, through the encapsulation of L-His&R6G (L-His = L-Histidine; R6G = Rhodamine 6G) into MOF@MOF framework ZIF-67@ZIF-8, composited material L-His&R6G@ZIF-67@ZIF-8 can be obtained. Additionally, through the etching process, a unique yolk-shell ZIF-8 chiral composite optical sensors L-His&R6G@ZIF-8 (1) can be successfully prepared. Photo-luminescent (PL) experiment also reveals that 1 can highly sensitively detect L-Proline (L-Pro) through the "turn-on" detection strategy (KBH = 1.22 × 104 M-1 and detection limit 1.9 μM). Further yolk-shell L-His&R6G@ZIF-8-based fabricate flexible mixed-matrix membranes has been prepared using doctor-blading technique, which show significant fluorescence enhancement effect under ultraviolet lamp. This work also provides the unique example of preparing chiral yolk-shell framework composite sensors, which have broad application in chiral sensing area.

A pyridine modified naphthol hydrazone Schiff base chemosensor for Al3+ via intramolecular charge transfer process

A pyridine modified naphthol hydrazone Schiff base chemosensor, NaPy, was prepared in a two-step process to detect aluminum ion (Al3+) in different samples. The probe shows a turn-off emission response towards Al3+ at a 1:1 binding stoichiometry via intramolecular charge transfer (ICT) mechanism, as validated by density functional theory (DFT) calculations and a series of spectroscopic measurements. The response time is slightly over one minute with a limit of detection (LOD) value of 0.164 µM, demonstrating the great sensitivity of the probe. It is also found that NaPy exhibits high selectivity towards Al3+ and resists interference from seventeen other cations. Application investigations in paper strips, water samples and HeLa cells suggest that NaPy can be used as an efficient probe for sensing Al3+ in real environmental samples and biosystems.

Novel MOF(Zr)-on-MOF(Ce) adsorbent for elimination of excess fluoride from aqueous solution

Herein, we used a one-pot method to fabricate a novel MOF-on-MOF adsorbent, namely MOF(Zr)-on-MOF(Ce). The adsorbent demonstrated a high maximum fluoride-ions capture capacity of 164.47 mg g-1. The morphology, elemental distribution, pore size distribution, and thermal stability were studied using SEM-EDS, XRD, BET, and TGA. The influence of the temperature, solution pH, fluoride concentration, and coexisting ions was explored using intermittent experiments. The results suggested that MOF(Zr)-on-MOF(Ce) had a fast capture rate for fluoride. MOF(Zr)-on-MOF(Ce) maintained an excellent fluoride removal performance over a wide pH range with an initial fluoride concentration of 20 mg L-1. The optimal effect was obtained at a pH of 4, but a high removal efficiency of 94% was maintained even at a pH of 9. Interference experiments showed that only the PO43- had an adverse inhibition influence. The field experiments demonstrated that MOF(Zr)-on-MOF(Ce) can keep the safety threshold levels of fluoride in drinking water. The Langmuir and pseudo-second order kinetic models were well fitted for the defluoridation process, demonstrating that the adsorption of fluoride ions on MOF(Zr)-on-MOF(Ce) was dominated by monolayer chemisorption. With the further characterization and kinetic thermodynamic studies indicates that the removal mechanism involves ion exchange, electrostatic interactions and complexation effect.

Fluorescent Sensors for Detecting and Imaging Metal Ions in Biological Systems: Recent Advances and Future Perspectives

Metal ions play a crucial role in many biochemical processes, and when in a state of scarcity or surplus, they can lead to various diseases. Therefore, the development of a selective, sensitive, cost-effective, and fast-responding sensor to detect metal ions is critical for in vitro medical diagnostics. In recent years, fluorescent sensors have been extensively investigated as potent kits for the effective assessment of metal ions in living systems due to their high sensitivity, selectivity, ability to perform real-time, non-invasive monitoring, and versatility. This review is an overview of recent advances in fluorescent sensors for the detection and imaging of metal ions in biosystems from 2018 to date. Specifically, we discuss their application in detecting essential metal ions and non-essential metal ions for in vitro diagnostics, living cell imaging, and in vivo imaging. Finally, we summarize remaining challenges and offer a future outlook on the above topics.

Extension of the alkyl chain length to adjust the properties of laccase-mimicking MOFs for phenolic detection and discrimination

2-Methylimidazole (MIM) is a classic organic ligand that shows excellent thermal stability and chemical robustness and is widely used in ZIFs. Recently, transformations of MOFs have been realized by using metals or ligands. In this study, we propose a new strategy-adjusting MIM by extending the alkyl chain length -to change the properties of related MOFs. Furthermore, we used copper as the metal core to replace zinc to mimic the active sites of laccases (electron transfer between copper and imidazole ring). As a result, the nanostructures transformed from nanoleaves to nanovesicles, which changed the Cu(II)/Cu(I) ratio from 3.7 to 1.7, as well as the lattice constant (decreased the diffraction angle) and enzyme-like activity (inhibition). In addition, we revealed that superoxidase anions were the main factors responsible for its laccase-like activity. We applied it to detect and discriminate phenolics. Laccase-mimicking activity was best at pH 7.0. When compared to protein laccase, the Cu-MeIm nanozyme had a greater Vmax at the same mass concentration. It was used to identify and distinguish phenolics. In the presence of Cu-MeIm nanozymes, the linear range is 0.1-2 mM and the detection limit of 2,4-DCP is 0.034 mM.

Biomass-based indole derived composited with cotton cellulose fiber integrated as sensitive fluorescence platform for NH3 detection and monitoring of seafood spoilage

Herein, an indole-derived water-soluble fluorescence nanomaterial and biomass-based cellulose filter paper integrated as solid-state fluorescence platform (H2-FP) for seafood spoilage detection was prepared. H2 exhibits high fluorescence stability and good biocompatibility with green beans, onion tissues, blood and zebrafish, which proving that H2 has a wide range of application scenarios. Further, H2-FP with effective, solid-state fluorescence, portable, and reusable characteristics is nanoengineered for NH₃ quantitative and qualitative detection (DOL = 2.6 ppm). Then, H2-FP has been successfully used to monitor NH₃ release in the seafood spoilage process at various storage time (4 °C and 25 °C). More importantly, fluorescence color of H2-FP is integrated smartphone are converted to digital values through RGB channels and successfully used to visualize semi-quantitative recognition of NH₃. This sensing fluorescence platform integrated with smartphone furnishes an effective fabrication strategy and broad prospects for explore various biomass-based materials for sensing NH₃ change in biological and environmental samples.

Solvo-thermal synthesis of a unique cluster-based nano-porous zinc(II) luminescent metal-organic framework for highly sensitive detection of anthrax biomarker and dichromate

In this work a flexible multi-dentate 4,4'-(1H-1,2,4-triazole-1-yl) methylene-bis(benzonic acid) (H₂L) ligand has been employed, a unique cluster-based nano-porous luminescent zinc(II) metal-organic framework {[Zn(μ₆-L)]·(DMAC)₂}_n (1) (DMAC = Dimethylacetamide) has been isolated under solvo-thermal conditions. The H₂L ligand adopts hexa-dentate coordination modes via one triazole nitrogen atom and four aromatic carboxylate oxygen atoms, which bridge the neighboring six-coordinated Zn^II centers, leading to a three-dimensional (3D) nano-porous metal organic framework. A PLATON program analysis suggests the total potential solvent area volume is 2028.9 Å³, which occupy 62.5% percent of the unit cell volume (3248.4 Å³). PXRD Patterns of the as-synthesized samples 1 have been determined confirming the purity of the bulky samples. Photo-luminescent properties indicate strong fluorescent emissions of 1 at the room temperature. Further photo-luminescent measurements show that 1 can exhibit highly sensitive real-time luminescence sensing of anthrax biomarker dipicolinic acid (DPA) with high quenching efficiency (K_SV = 1.48 × 10⁵ M^-1) and low detection limit (0.298 μM (S/N = 3)). Meanwhile 1 also exhibits highly selective and sensitive luminescence sensing for Cr₂O₇^2- ions in aqueous solutions with high quenching efficiency K_SV = 1.22 × 10⁴ L·mol^-1 and low detection limit (0.023 μM (S/N = 3)). Therefore 1 can be used a unique multi-functional 3D cluster-based metal organic material in sensitive detection and effective detection of environment pollutants and biomarker molecules.

Real time sensor for Fe3+, Al3+, Cu2+ & PPi through quadruple mechanistic pathways using a novel dipodal quinoline-based molecular probe

A quinoline-based small molecular probe, H₂L was designed, synthesized and characterized by different spectroscopic methods. It was utilized as a multi-responsive probe for the detection of Fe³⁺, Al³⁺, Cu²⁺ and PPi. It showed very selective instant turn-on fluorimetric response towards Fe³⁺and Al³⁺ with a detection limit in nanomolar range. Solutions of H₂L containing Fe³⁺ or Al³⁺ could sequentially sense PPi by a turn-off mechanism. Also, H₂L could determine the presence of Cu²⁺ very selectively among a series of other metal ions by a sharp change in colour. Detection of Cu²⁺ through colorimetry was further investigated by systematic UV-Vis studies and the potential of H₂L to act as a potential colorimetric sensor for Cu²⁺ was suitably established. Filter-paper strip experiments were conducted to demonstrate the practical utility of the proposed sensor. Potential applications of H₂L as a sensor for pH in the acidic range has also been explored.

Labeling of liver cells with CdSe/ZnS quantum dot-based fluorescence probe below freezing point

In this paper, CdSe/ZnS quantum dots (QDs) with particle size of 5.5 ~ 9.3 nm were synthesized, and the fluorescence emission ranged from 545 ~ 616 nm. When the volume fraction of ethanol was 30%, the water-soluble QD dispersion system remained liquid under -20 °C freezing conditions, the fluorescence intensity increased with a decrease in temperature, and the quantum yield reached 79% at -20 °C. The endothelial cell adhesion molecule CD31 antibody (anti-CD31) was used as the primary antibody, QDs were coupled with IgG as the secondary antibody (QD-Ab), and effective labeling of hepatic sinusoid endothelial cells was achieved at -20 °C. Fluorescence imaging and flow cytometry analysis showed that the labeling efficiency was as high as 97%, indicating that QDs have an important application prospect in microscopic section tomography of the liver.

Naked-eye sensing and target-guiding treatment of bacterial infection using pH-tunable multicolor luminescent lanthanide-based hydrogel

In this work, a pH-tunable multicolor luminescent lanthanide-based hydrogel (CS/DEX/CP) was prepared based on lanthanide coordination polymer (CP), dextran aldehyde (DEX) and chitosan (CS). The CP was obtained by the self-assembly of guanosine acid (GMP), ciprofloxacin (CIP), Eu³⁺, and Tb³⁺. As-prepared CS/DEX/CP hydrogel could emit blue, green, and red luminescence of CIP, Tb³⁺, and Eu³⁺, respectively. It was also found that the luminescence of CS/DEX/CP hydrogel exhibited visual color change in the pH range of 5.5 to 8. Such pH-sensitive hydrogel was multicolor-responsive to protons produced by bacterial growth, therefore, it could provide early warning of bacterial infection by naked-eye. In addition, the increased acidity resulted in not only the degradation of acid-labile Schiff base linkages between DEX and CS, but also the fracture of coordination between CIP and lanthanide ions. As a result, the released CIP and CS showed significantly antibacterial activity against both S. aureus and E. coli.

Rational design of AIE-based fluorescent probes for hypochlorite detection in real water samples and live cell imaging

As one kind of important disinfectant and reactive oxygen species (ROS), hypochlorite (ClO^-), plays vital roles in both water treatment and cell homeostasis. In this work, by decorating a series of groups with different electron donating and withdrawing properties on tetraphenylethene (TPE), four aggregation-induced emission (AIE)-based fluorescent probes containing C˭C double bonds as the potential reaction sites named Probe A, B, C and D were constructed, and their sensing performance for ClO^- was systematically studied. The results showed that the substituents can not only effectively tune the photophysical properties of the probes, but also make a significant impact on their sensing performance for ClO^-. Combined with the theoretical calculation results, it can be inferred that the reactivity of the probes for ClO^- can be greatly enhanced with the increase of electron cloud density on the C˭C double bonds by the introduction of strong electron-donating group (EDG) and electron-withdrawing group (EWG) adjacent to the double bonds. Finally, the best performing Probe D was selected and then successfully applied to ClO^- detection in real water samples and live cell imaging.

A benzaldehyde-indole fused chromophore-based fluorescent probe for double-response to cyanide and hypochlorite in living cells

With the rapid development of various industries, cyanide (CN-) and hypochlorite (ClO-) have a tremendously adverse effect on the health of humans and animals. In this study, a fluorescent probe HHTB based on a benzaldehyde-indole fused chromophore was designed to detect cyanide and hypochlorite simultaneously. The synthesized probe was found to have strong anti-interference ability. In addition, the designed probe could respond rapidly to ClO- in just 80 s, while the color changed visibly from red to colorless. Moreover, the response time to CN- was longer (about 160 s), with the apparent color change from red to light red. The ratiometric and colorimetric absorbance variation of HHTB was due to the nucleophilic attack of CN- on the indole C[double bond, length as m-dash]N functional group and the strong oxidization of ClO- which destroyed the C[double bond, length as m-dash]C bonds and the conjugation systems. Furthermore, the probe HHTB responding to ClO- and CN- presented high sensitivity, as the calculated detection limits were 1.18 nM and 1.40 nM, respectively. The probe was also found to have low biological toxicity and was used in living cells successfully. Therefore, it has good application prospect in the field of cell imaging and biomedicine. The binding mechanism of HHTB-CN and the reaction mechanism of HHTB and ClO- were further elucidated by a series of experiments.

Simultaneous surface functionalization and drug loading: A novel method for fabrication of cellulose nanocrystals-based pH responsive drug delivery system

Herein, a novel strategy for surface functionalization and drug loading of cellulose nanocrystals (CNCs) through formation of hydrazone bonds between functionalized CNCs and aldehyde group containing polyethylene glycol (CHO-PEG)/anticancer drug doxorubicin (DOX) was reported for the first time. DOX could be loaded on PEGylated CNCs with high capacity and released from drug complexes (P-CNCs-D) with pH dependent behavior. The biological evaluation results demonstrated that drug carriers (CNCs-EBO-NH) showed negative cytotoxicity while DOX could be transported into cells and exhibits desirable anticancer effects. As compared with other method, the method developed in this work is rather simple and effective and can be achieved for simultaneous for surface functionalization and drug loading in a one-pot route. This work will open a new avenue for fabrication of various multifunctional composites based on other carbohydrate polymers or materials and to explore their applications in biomedical fields.

Facile synthesis of porous MoS2nanofibers for efficient drug delivery and cancer treatment

Porous MoS₂nanofibers were synthesized by electroplating and post-annealing and applied in a responsive drug delivery system. The one-dimensional (1D) MoS₂nanofibers displayed a high specific surface area, controllable morphology, and uniform size, serving as a promising drug carrier for chemotherapy. After surface modification with polyethylene glycol (PEG) through PEGylation, the MoS₂/PEG composite displayed excellent physical/chemical stability and biocompatibility. More importantly, MoS₂/PEG loaded with doxorubicin (DOX) exhibited a controllable release responsive to pH and near-infrared (NIR) irradiation and demonstrated precise DOX dose release. Such remarkable anticancer effects were mainly attributed to outstanding photothermal performance and stability of porous MoS₂nanofibers. This work offered a new opportunity of employing porous MoS₂nanofibers as drug carriers for effective cancer chemotherapy.

Solvothermal Preparation of a Lanthanide Metal-Organic Framework for Highly Sensitive Discrimination of Nitrofurantoin and l-Tyrosine

Metal-organic frameworks (MOFs) have been rapidly developed for their broad applications in many different chemistry and materials fields. In this work, a multi-dentate building block 5-(4-(tetrazol-5-yl)phenyl)-isophthalic acid (H₃L) containing tetrazole and carbolxylate moieties was employed for the synthesis of a two-dimensional (2D) lanthanide MOF [La(HL)(DMF)₂(NO₃)] (DMF = N,N-dimethylformamide) (1) under solvothermal condition. The fluorescent sensing application of 1 was investigated. 1 exhibits high sensitivity recognition for antibiotic nitrofurantoin (K_sv: 3.0 × 10³ M⁻¹ and detection limit: 17.0 μM) and amino acid l-tyrosine (K_sv: 1.4 × 10⁴ M⁻¹ and detection limit: 3.6 μM). This work provides a feasible detection platform of 2D MOFs for highly sensitive discrimination of antibiotics and amino acids.