A fluorescence aptasensor based on controlled zirconium-based MOFs for the highly sensitive detection of T-2 toxin

Portable T-2 toxin biosensor based on target-responsive DNA hydrogel using water column height as readout

T-2 toxin, a hazardous mycotoxin often present in cereals and products based on cereals, poses a substantial risk to humans and animals due to its high toxicity. The development of uncomplicated, quick and highly sensitive methods for detecting T-2 toxin is imperative. In this work, a portable sensing system was constructed using water column height as a readout device in combination with a controlled release system, which allows for an accurate quantitative analysis of T-2 toxin without the need for expensive instrumentation or skilled technicians. Hyaluronic acid (HA) hydrogel was constructed by double cross-linked DNA/aptamer hybrids with polyethyleneimine (PEI) and embedded with platinum nanoparticles (Pt NPs). The aptamer specifically bound to T-2 toxin in its presence, resulting in the disruption of the hydrogel and subsequent release of the Pt NPs. These Pt NPs were later mixed with a solution of H2O2 in a confined reaction flask, leading to the decomposition of H2O2 into O2. A glass capillary tube containing a column of red water had been inserted into the cap of the reaction flask, and the low solubility of O2 led to an increase in pressure within the reaction unit, causing the red water column to rise. There is a good linear correlation between the height of the capillary liquid level and the T-2 toxin concentration in the range of 20 ng/mL to 6 μg/mL. The system has been successfully used to detect T-2 toxin in samples of barley tea and corn.

A highly sensitive and selective Cd-MOF fluorescent probe for the detection of His, NB, TC and PTH and its applications in real samples

A novel metal-organic framework (MOF) with the formula of [Cd(CIA)(4,4'-BB)·H2O]·H2O (Cd-MOF) (H2CIA = 5-methoxyisophthalic acid, 4,4'-BB: 4,4'-bis((1H-imidazol-1-yl)methyl)-1,1'-biphenyl) has been designed and synthesized through solvothermal reaction. The structure was characterized by TG, IR, PXRD, elemental analysis, single-crystal X-ray diffraction and XPS. The coordination pattern of the fully deprotonated ligand (CIA) in Cd-MOF is μ2-к1: к0: к2. The complex is found to be a three-dimensional reticular material with good thermal stability. Further study revealed that Cd-MOF has good fluorescence performance and can be used as a fluorescent probe for sensitive detection of histidine (His), nitrobenzene (NB), tetracycline (TC) and pyrimethanil (PTH) in water. Four cycles experiments can be achieved with a low detection limit. The detection limits were 0.3 µM (His), 0.05 µM (NB), 0.2 µM (TC) and 0.01 µM (PTH), respectively. To verify the feasibility of detecting PTH in real samples, we further explored it in water samples and apple peels. The spiked recoveries were 95.3-99.4 % and 97.2-101.2 %, respectively. Finally, the fluorescence quenching mechanism of Cd-MOF in His, NB, TC and PTH detection is discussed in detail.

Detection mechanism and the outlook of metal-organic frameworks for the detection of hazardous substances in milk

Milk has a high nutritional value. However, milk is easily contaminated in the production, processing, and storage processes, which harms consumers' health. Therefore, the harmful substances' detection in milk is important. Metal-organic frameworks (MOFs) have proven high potential in food safety detection due to their unique porous structure, large effective surface area, large porosity, and structural tunability. This article systematically describes the detection mechanism of fluorescence, electrochemical, colorimetric, and enzyme-linked immunosorbent assay based on MOFs. The progress of the application of MOFs in the detection of antibiotics, harmful microorganisms and their toxins, harmful ions, and other harmful substances in milk in recent years is reviewed. The structural tunability of MOFs enables them to be functionalized, giving the ability to be applied to different detection methods or substances. Therefore, MOFs can be used as an advantageous sensing material for detecting harmful substances in the complex environment of milk.

Nanoscale Materials Applying for the Detection of Mycotoxins in Foods

Trace amounts of mycotoxins in food matrices have caused a very serious problem of food safety and have attracted widespread attention. Developing accurate, sensitive, rapid mycotoxin detection and control strategies adapted to the complex matrices of food is crucial for in safeguarding public health. With the continuous development of nanotechnology and materials science, various nanoscale materials have been developed for the purification of complex food matrices or for providing response signals to achieve the accurate and rapid detection of various mycotoxins in food products. This article reviews and summarizes recent research (from 2018 to 2023) on new strategies and methods for the accurate or rapid detection of mold toxins in food samples using nanoscale materials. It places particular emphasis on outlining the characteristics of various nanoscale or nanostructural materials and their roles in the process of detecting mycotoxins. The aim of this paper is to promote the in-depth research and application of various nanoscale or structured materials and to provide guidance and reference for the development of strategies for the detection and control of mycotoxin contamination in complex matrices of food.

Aptamer-modified metal organic frameworks for measurement of food contaminants: a review

The measurement of food contaminants faces a great challenge owing to the increasing demand for safe food, increasing consumption of fast food, and rapidly changing patterns of human consumption. As different types of contaminants in food products can pose different levels of threat to human health, it is desirable to develop specific and rapid methods for their identification and quantification. During the past few years, metal-organic framework (MOF)-based materials have been extensively explored in the development of food safety sensors. MOFs are porous crystalline materials with tunable composition, dynamic porosity, and facile surface functionalization. The construction of high-performance biosensors for a range of applications (e.g., food safety, environmental monitoring, and biochemical diagnostics) can thus be promoted through the synergistic combination of MOFs with aptamers. Accordingly, this review article delineates recent innovations achieved for the aptamer-functionalized MOFs toward the detection of food contaminants. First, we describe the basic concepts involved in the detection of food contaminants in terms of the advantages and disadvantages of the commonly used analytical methods (e.g., DNA-based methods (PCR/real-time PCR/multiplex PCR/digital PCR) and protein-based methods (enzyme-linked immunosorbent assay/immunochromatography assay/immunosensor/mass spectrometry). Afterward, the progress in aptamer-functionalized MOF biosensors is discussed with respect to the sensing mechanisms (e.g., the role of MOFs as signal probes and carriers for loading signal probes) along with their performance evaluation (e.g., in terms of sensitivity). We finally discuss challenges and opportunities associated with the development of aptamer-functionalized MOFs for the measurement of food contaminants.

Advances in aptamers, and application of mycotoxins detection: A review

Mycotoxin contamination in food products can easily cause serious health hazards and economic losses to human beings. How to accurately detect and effectively control mycotoxin contamination has become a global concern. Mycotoxins conventional detection techniques e.g; ELISA, HPLC, have limitations like, low sensitivity, high cost and time-consuming. Aptamer-based biosensing technology has the advantages of high sensitivity, high specificity, wide linear range, high feasibility, and non-destructiveness, which overcomes the shortcomings of conventional analysis techniques. This review summarizes the sequences of mycotoxin aptamers that have been reported so far. Based on the application of four classic POST-SELEX strategies, it also discusses the bioinformatics-assisted POST-SELEX technology in obtaining optimal aptamers. Furthermore, trends in the study of aptamer sequences and their binding mechanisms to targets is also discussed. The latest examples of aptasensor detection of mycotoxins are classified and summarized in detail. Newly developed dual-signal detection, dual-channel detection, multi-target detection and some types of single-signal detection combined with unique strategies or novel materials in recent years are focused. Finally, the challenges and prospects of aptamer sensors in the detection of mycotoxins are discussed. The development of aptamer biosensing technology provides a new approach with multiple advantages for on-site detection of mycotoxins. Although aptamer biosensing shows great development potential, still some challenges and difficulties are there in practical applications. Future research need high focus on the practical applications of aptasensors and the development of convenient and highly automated aptamers. This may lead to the transition of aptamer biosensing technology from laboratory to commercialization.

A fluorescent aptasensor for quantification of cocaine mediated by signal amplification characteristics of UiO-66/AuNPs nanocomposite

Due to the detrimental effects of cocaine on the human body such as organ damage, paranoia, immunodeficiency, cardiovascular disease, blood pressure, and stress, it is highly required to develop sensing approaches for its rapid and facile determination. Based on the signal enhancement capability of the UiO-66/AuNPs nanocomposite and acting as a capture agent, we designed a cost-effective fluorescent aptasensor for cocaine detection. The cocaine presence in the sample would cause a considerable escalation in the quenching of the fluorescence signal. The aptasensor achieved the linear response range over 0.5 μM-20 μM with a low detection limit of 0.178 μM. The selectivity of the designed aptasensing assay was successfully confirmed by examining several analgesic drugs. The aptasensor was employed for cocaine determination in human serum as the real samples. This method has a substantial benefit the for development of a low-cost and facile tool in medicine and forensic science.

A universal design of turn-on fluorescent aptasensor based on luminescent MOFs: Application for the detection of bisphenol A in water, milk and chicken samples

A universal design of turn-on fluorescent aptasensor based on aptamer functionalized gold nanoparticles (AuNPs) and luminescent metal-organic frameworks (LMOFs) complex (AuNPs-Apt/NH₂-MIL-125(Ti)) was realized for bisphenol A (BPA) detection. LMOF NH₂-MIL-125(Ti) was prepared using facial hydrothermal method. BPA aptamer functionalized AuNPs were prepared and adsorbed on the surface of NH₂-MIL-125(Ti) to obtain platform of the fluorescent aptasensor. The fabrication process, sensing performance and applicability of the proposed aptasensor were characterized and investigated carefully. Linear detection range of the constructed aptasensor was from 1 × 10^-9 mol L^-1 to 1 × 10^-4 mol L^-1 with good selectivity, repeatability, stability and reproducibility under optimal experimental conditions. Meanwhile, the fluorescent aptasensor was successfully utilized for BPA detection in real samples with the recoveries of 95.80%-103.12%. The proposed aptasensor based on AuNPs-Apt/NH₂-MIL-125(Ti) holds significant potential for BPA detection in environmental and food samples, promoting the construction and application of LMOFs-based aptasensor.

Metal-Organic Frameworks Nanocarriers for Functional Nucleic Acid Delivery in Biomedical Applications

Metal-organic frameworks (MOFs), a distinctive funtionalmaterials which is constructed by various metal ions and organic molecules, have gradually attracted researchers' attention from they were founded. In the last decade, MOFs emerge as a biomedical material with potential applications due to their unique properties. However, the MOFs performed as nanocarriers for functional nucleic acid delivery in biomedical applications rarely summarized. In this review, we introduce recent developments of MOFs for nucleic acid delivery in various biologically relevant applications, with special emphasis on cancer therapy (including siRNA, ASO, DNAzyme, miRNA and CpG oligodeoxynucleotides), bioimaging, biosensors and separation of biomolecules. We expect the accomplishment of this review could benefit certain researchers in biomedical field to develop novel sophisticated nanocarriers for functional nucleic acid delivery based on the promising material of MOFs.

Fluorescence-based aptasensors for small molecular food contaminants: From energy transfer to optical polarization

Small molecular food contaminants, such as mycotoxins, pesticide residues and antibiotics, are highly probable to be passively introduced in food at all stages of its processing, including planting, harvest, production, transportation and storage. Owing to the high risks caused by the unknowing intake and accumulation in human, there is an urgent need to develop rapid, sensitive and efficient methods to monitor them. Fluorescence-based aptasensors provide a promising platform for this area owing to its simple operation, high sensitivity, wide application range and economical practicability. In this paper, the common sorts of small molecular contaminants in foods, namely mycotoxins, pesticides, antibiotics, etc, are briefly introduced. Then, we make a comprehensive review, from fluorescence resonance energy transfer (in turn-on, turn-off, and ratiometric mode, as well as energy upconversion) to fluorescence polarization, of the fluorescence-based aptasensors for the determination of these food contaminants reported in the last five years. The principle of signal generation, the advances of each sort of fluorescent aptasensors, as well as their applications are introduced in detail. Additionally, we also discussed the challenges and perspectives of the fluorescent aptasensors for small molecular food contaminants. This work will offer systematic overview and inspiration for amateurs, researchers and developers of fluorescence-based aptasensors for the detection of small molecules.

Current State of Sensors and Sensing Systems Utilized in Beer Analysis

Beer is one of the most consumed beverages in the world. Advances in instrumental techniques have allowed the analysis and characterization of a large number of beers. However, review studies that outline the methodologies used in beer characterization are scarce. Herein, a systematic review investigating the molecular targets and sensometric techniques in beer characterization was performed following the PRISMA protocol. The study reviewed 270 articles related to beer analysis in order to provide a comprehensive summary of the recent advances in beer analysis, including methods using sensors and sensing systems. The results revealed the use of various techniques that include several technologies, such as nanotechnology and electronics, often combined with scientific data analysis tools. To our knowledge, this study is the first of its kind and provides the reader with a faithful overview of what has been done in the sensor field regarding beer characterization.

Electrochemical aptasensor based on the target-induced strand displacement strategy-driven for T-2 toxin detection

Herein, an aptasensor based on target-induced strand displacement (TISD) strategy was developed for sensitive detection of T-2 toxin. Gold nanoparticles@ aminated manganese dioxide (AuNPs@NH₂-MnO₂) exhibited excellent electrical conductivity and provided more binding sites for aptamer (Apt). Besides, polyethyleneimine-reduced graphene oxide/gold‑platinum core-shell nanorods composites (PEI-rGO/Pt@Au NRs) were used to be carriers for signaling tags, as their sufficiently large specific surface area improved the loading capacity for signal molecules. In the presence of T-2, the Apt sequence was more inclined to form an Apt-T-2 complex, and the cDNA was displaced from the Apt-cDNA duplex, while the signal tag was released, resulting in a weakened MB signal, differential pulse voltammetry (DPV) was used to record the signal change. Under optimal conditions, the signal response of the constructed electrochemical aptasensor exhibited a good linear relationship with the concentration of T-2. The detection limit was 8.74 × 10^-7 ng mL^-1over a wide range of concentration from 5 × 10^-6 ng mL^-1 to 5 ng mL^-1. Furthermore, the proposed aptasensor had excellent specificity, good stability and can be well applied to the detection of real samples. It provided a new avenue for the research and development of sensitive aptasensors in food detection and analysis.

MOF-Based Mycotoxin Nanosensors for Food Quality and Safety Assessment through Electrochemical and Optical Methods

Mycotoxins in food are hazardous for animal and human health, resulting in food waste and exacerbating the critical global food security situation. In addition, they affect commerce, particularly the incomes of rural farmers. The grave consequences of these contaminants require a comprehensive strategy for their elimination to preserve consumer safety and regulatory compliance. Therefore, developing a policy framework and control strategy for these contaminants is essential to improve food safety. In this context, sensing approaches based on metal-organic frameworks (MOF) offer a unique tool for the quick and effective detection of pathogenic microorganisms, heavy metals, prohibited food additives, persistent organic pollutants (POPs), toxins, veterinary medications, and pesticide residues. This review focuses on the rapid screening of MOF-based sensors to examine food safety by describing the main features and characteristics of MOF-based nanocomposites. In addition, the main prospects of MOF-based sensors are highlighted in this paper. MOF-based sensing approaches can be advantageous for assessing food safety owing to their mobility, affordability, dependability, sensitivity, and stability. We believe this report will assist readers in comprehending the impacts of food jeopardy exposure, the implications on health, and the usage of metal-organic frameworks for detecting and sensing nourishment risks.

An Alkyne-Mediated SERS Aptasensor for Anti-Interference Ochratoxin A Detection in Real Samples

Avoiding interference and realizing the precise detection of mycotoxins in complex food samples is still an urgent problem for surface-enhanced Raman spectroscopy (SERS) analysis technology. Herein, a highly sensitive and specific aptasensor was developed for the anti-interference detection of Ochratoxin A (OTA). In this aptasensor, 4-[(Trimethylsilyl) ethynyl] aniline was employed as an anti-interference Raman reporter to prove a sharp Raman peak (1998 cm-1) in silent region, which could avoid the interference of food bio-molecules in 600-1800 cm-1. 4-TEAE and OTA-aptamer were assembled on Au NPs to serve as anti-interference SERS probes. Meanwhile, Fe3O4 NPs, linked with complementary aptamer (cApts), were applied as capture probes. The specific binding of OTA to aptamer hindered the complementary binding of aptamer and cApt, which inhibited the binding of SERS probes and capture probes. Hence, the Raman responses at 1998 cm-1 were negatively correlated with the OTA level. Under the optimum condition, the aptasensor presented a linear response for OTA detection in the range of 0.1-40 nM, with low detection limits of 30 pM. In addition, the aptasensor was successfully applied to quantify OTA in soybean, grape and milk samples. Accordingly, this anti-interference aptasensor could perform specific, sensitive and precise detection of OTA in real samples, and proved a reliable reference strategy for other small-molecules detection in food samples.

A switchable and signal-amplified aptasensor based on metal organic frameworks as the quencher for turn-on detection of T-2 mycotoxin

A simple and low-cost fluorescence aptasensor was developed for rapid and sensitive signal amplification detection of T-2 mycotoxin (T-2). Dual-terminal-fluorescein amidite (FAM)-labeled aptamer (D-aptamer) acted as a recognition element and signal indicator. The metal organic frameworks (MOFs) of N, N'-bis(2-hydroxyethyl)dithiooxamidato copper (II) (H₂dtoaCu) were as the quencher. The D-aptamer was initially adsorbed to the surface of H₂dtoaCu, leading to efficient quenching of the aptasensor. Upon addition of T-2, the D-aptamer underwent a conformation change to form the T-2/T-2 aptamer complex, which induced the signaling probe to be released from the H₂dtoaCu surface. Thus, the fluorescence intensity (FL) of the D-aptamer was recovered. Versus the single-terminal-FAM-labeled aptamer (S-aptamer), the D-aptamer showed a lower detection limit of 0.39 ng/mL. The aptasensor was also successfully applied to detect T-2 in corn and wheat samples with good recoveries.