A novel peptide-based relay fluorescent probe with a large Stokes shift for detection of Hg2+ and S2- in 100 % aqueous medium and living cells: Visual detection via test strips and smartphone

A highly sensitive and selective fluorescent "on-off-on" peptide-based probe for sequential detection of Hg2+ and S2- ions: Applications in living cells and zebrafish imaging

Mercury ions (Hg2+) and sulfur ions (S2-), have caused serious harm to the ecological environment and human health as two kinds of highly toxic pollutants widely used. Therefore, the visual quantitative determination of Hg2+ and S2- is of great significance in the field of environmental monitoring and medical therapy. In this study, a novel fluorescent "on-off-on" peptide-based probe DNC was designed and synthesized using dipeptide (Asn-Cys-NH2) as the raw material via solid phase peptide synthesis (SPPS) technology with Fmoc chemistry. DNC displayed high selectivity in the recognition of Hg2+, and formed non-fluorescence complex (DNC-Hg2+) through 2:1 binding mode. Notably, DNC-Hg2+ complex generated in situ was used as relay response probe for highly selective sequential detection of S2- through reversible formation-separation. DNC achieved highly sensitive detection of Hg2+ and S2- with the detection limits (LODs) of 8.4 nM and 5.5 nM, respectively. Meanwhile, DNC demonstrated feasibility for Hg2+ and S2- detections in two water samples, and the considerable recovery rate was obtained. More importantly, DNC showed excellent water solubility and low toxicity, and was successfully used for consecutive discerning Hg2+ and S2- in test strips, living cells and zebrafish larvae. As an effective visual analysis method in the field, smartphone RGB Color Picker APP realized semi-quantitative detections of Hg2+ and S2- without the need for complicated device.

Ratiometric peptide-based fluorescent probe with large Stokes shift for detection of Hg2+ and S2- and its applications in cells imaging and smartphone-assisted recognition

In this work, a new ratiometric fluorescent probe DKA was synthesized based on the double sides of lysine backbone conjugated with alanine and dansyl groups. DKA exhibited fluorescence ratiometric response for Hg2+ with high sensitivity (13.4 nM), specific selectivity (only Hg2+), strong anti-interference ability (no interference), fast recognition (within 60 s) and wide pH range (5-10). The stoichiometry of binding of DKA and Hg2+ was determined to be 1:1 via Job's plot, ESI-HRMS and 1HNMR titration analysis. Subsequently, the in situ formation of DKA-Hg2+ complex was used for highly selective detection of S2- as a novel fluorescence "on-off" probe, and the lowest detection limit for S2- was 12.9 nM. In addition, DKA possessed excellent cells permeation and low toxicity, and fluorescence imaging of Hg2+ and S2- was performed in living Hacat cells. Most importantly, the digital imaging using a smartphone color recognition APP indicated that DKA could semi-quantitatively and visually detected Hg2+ and S2- without expensive equipment.

A novel ratiometric peptide-based fluorescent probe for sequential detection of Hg2+ and S2- ions and its application in living cells and zebrafish imaging

A new ratiometric peptide-based fluorescent probe DWPH was designed and synthesized, comprising dansyl fluorophore as a fluorescent dye, and tripeptide backbone (Trp-Pro-His-NH2) as a recognition group. The addition of Hg2+ caused the maximum emission peak of DWPH to blue shift from 560 nm to 510 nm. DWPH exhibited large Stokes shift (230 nm), satisfactory water solubility (100 % aqueous medium), good selectivity (only Hg2+), high sensitivity (24.6 nM), rapid response (within 50 s) and strong anti-interference ability for Hg2+ detection over a wide pH range (7-11). Additionally, the complex DWPH-Hg2+ as a relay response probe could also be applied to S2- according to displacement approach. Notably, the detection limit for S2- was calculated as 23.3 nM, exhibiting that DWPH showed great potential for environmental monitoring and bioimaging. In addition, DWPH were successfully used to determine Hg2+ and S2- in living cells and zebrafish based on excellent permeability and low cytotoxicity. What's more, the gradient concentration color changes of Hg2+ and S2- were combined with the smartphone APP to obtain red-green-blue (RGB) values, thus enabling rapid semi-quantitative detection of Hg2+ and S2- without expensive instruments.

An amphiphilic dansyl based multianalyte sensor for the detection of Hg2+, PPi, and TNP: A three-in-one chemical sensor

A fluorescent dansyl-based amphiphilic probe, 5-(dimethylamino)-N-hexadecylnaphthalene-1-sulfonamide (DLC), was synthesized and characterized to detect multiple analytes at different sensing environments. In acetonitrile, DLC detects nitro explosives such as trinitrophenol (TNP) and 2,4-dinitrophenol (2,4-DNP) by an emission "on-off" response method, and the detection limits (LOD) were estimated to be as low as 4.3 µM and 17.4 µM, respectively. Amphiphilic long chains of the probe were embedded into lipid bilayers to form nanoscale vesicles DLC.Ves. Nanovesicular probe DLC.Ves was found to be highly selective for Hg2+ among other metal ions and for pyrophosphate (PPi) ions among various anions. DLC.Ves could detect Hg2+ with a turn "on-off" emission and PPi with ratiometric change in emission at 525 nm. It is proposed that DLC.Ves could detect Hg2+ via the Hg2+-induced aggregation quenching mechanism and PPi through the Hydrogen bonding. The LODs are estimated as 6.41 µM and 70.9 µM for Hg2+ and PPi, respectively. 1H NMR, SEM, and fluorescence lifetime measurements confirmed the binding mechanism. Thus, it is believed that the simple fluorescent probe DLC could be a prominent sensor to detect multiple analytes depending on the sensing medium.

Rational development of a peptide-based probe for fluorescence and colorimetric dual-mode detection of Cu2+ and S2- ions: Real application in cell imaging and test strips

A new dual-mode probe FAM-SSH with fluorescence and colorimetric properties was developed by solid-phase peptide synthesis, comprising 5-carboxy fluorescein (5-FAM) as a fluorophore, and tripeptide (Ser-Ser-His) as a recognition group. FAM-SSH not only displayed highly selective detection of Cu2+ based on fluorescence quenching mode, but also achieved colorimetric recognition of Cu2+ in solution, wherein a color change was observable to the naked eye. Additionally, the FAM-SSH-Cu2+ ensemble was highly selective for S2- over a wide pH range (7.0-12.0), characterized by a fluorescence enhanced response and colorimetric recognition, which was caused by the release of FAM-SSH and the precipitation of CuS. Moreover, the limit of detection (LOD) values for Cu2+ and S2- were 55.5 nM and 31.1 nM, respectively. Results of sample analyses and cell imaging experiments indicated that FAM-SSH has exciting field practicability and good cell permeability, and would be further useful for detection and imaging in environmental systems and living cells. Finally, test strips were produced by immersing them in FAM-SSH solution, thereby creating a method for portable visual detection. More importantly, a smartphone-assisted visual sensing platform was also developed for semi-quantitative Cu2+ and S2- detection with LOD values of 0.48 μM and 1.22 μM, respectively.

A smartphone-assisted paper-based ratio fluorescent probe for the rapid and on-site detection of tetracycline in food samples

Rapid, sensitive and portable analytical methods for on-site detection of tetracycline (TC) in food samples is of critical importance for food safety and public health. In this study, a dual-emission ratio fluorescent probe (Gd0.9@Eu0.1) was prepared and utilized for the detection of tetracycline (TC) by observing the fluorescence color change from blue to red. The detection process exhibits a wide linear range (0-52.0 μM), good selectivity and low detection limit (14 nM). A paper-based probe and a colorimetric card was constructed for the visual detection of TC. Furthermore, a novel and portable detection platform combining smartphone and test strip was exploited for the quantitative and on-site detection of TC in real pork sample. The developed method was validated through intra- (n = 5) and inter-day (n = 2) measurements, as well as comparison with a traditional HPLC method. These statistical result validate the reliability and accuracy of the developed method. This intelligent detection platform represents a promising approach for the rapid, sensitive and visual detection of TC in food samples.

Synthesis of Mesoporous Eu3+-Doped Zinc/Silicate Phosphors for Highly Selective and Sensitive Detection of Sulfide Ions

A mesoporous Eu3+-doped zinc/silicate phosphor with a large surface area (>100 m2g-1) and amorphous structure was prepared in an aqueous solution without using any organic template. The residual concentration of the Zn2+ ion in the filtrate is lower than the standard of effluent 3.5 ppm under a pH 8-11 preparation condition. When a sulfide ion (S2-) is present in aqueous solution, the phosphor can react with the sulfide ion to transform from the amorphous structure to the crystalline ZnS, which causes structural transformation and a subsequent decrease in luminescent intensity. This distinct phosphor with a high surface area and amorphous structure can be applied through the structure transformation mechanism for highly selective and sensitive detection of the sulfide ions at low concentrations. In addition, the luminescent efficiency was obtained from adjustments in the pH value, calcination temperature, and Eu3+ ion concentration. The quenching efficiency, the limit of detection (CLOD), S2- ion selectivity, and phosphor regeneration ability were systematically explored in sulfide ion detection tests. Due to the novel S2- ion-induced structural transformation, we found that the amorphous Eu3+-doped zinc/silicate phosphors demonstrate a CLOD sensitivity as low as 1.8 × 10-7 M and a high Stern-Volmer constant (KSV) of 3.1 × 104 M-1. Furthermore, the phosphors were easily regenerated through simple calcination at 500 °C and showed a KSV value of 1.4 × 104 M-1. Overall, the Eu3+-doped zinc/silicates showed many advantageous properties for detecting sulfide ions, including low toxicity, green synthesis, good selectivity, high sensitivity, and good renewability.

A novel Cu(II)-assisted peptide fluorescent probe for highly sensitive detection of glyphosate in real samples: real application in test strips and smartphone

Glyphosate (Glyp) is an organophosphorus herbicide, and its abuse causes potential harm to the environment and human health. Thus, the development of simple and portable methods for rapid and visual detection of glyphosate is of great importance. Herein, we successfully developed a new fluorescent probe L with dansyl fluorophore as a fluorescent dye and tetrapeptide (Ala-Ser-Arg-His-NH2) as a recognition group. According to the design, L exhibited a specific fluorescence quenching response to Cu2+ and formed an L-Cu2+ ensemble with a molecular ratio of 2:1, demonstrating a limit of detection (LOD) as low as 12.04 nM. Interestingly, the L-Cu2+ ensemble as a relay response probe exhibited a specific fluorescence "off-on" response to glyphosate without interference from other pesticides and anions based on the strong complexation of glyphosate and Cu2+. The LOD of the L-Cu2+ ensemble for glyphosate was calculated as 12.59 nM. Additionally, the results of three recovery experiments with real samples showed that L has good practicability and accuracy in detecting glyphosate. Test strips were also fabricated to achieve facile detection of glyphosate to demonstrate the practical application potential of the L-Cu2+ ensemble. The L-Cu2+ ensemble was integrated with a smartphone for semi-quantification of glyphosate in a field environment under a 365 nm UV lamp.

Recent Development in Fluorescent Probes for the Detection of Hg2+ Ions

Mercury, a highly toxic heavy metal, poses significant environmental and health risks, necessitating the development of effective and responsive techniques for its detection. Organic chromophores, particularly small molecules, have emerged as promising materials for sensing Hg²⁺ ions due to their high selectivity, sensitivity, and ease of synthesis. In this review article, we provide a systematic overview of recent advancements in the field of fluorescent chemosensors for Hg²⁺ ions detection, including rhodamine derivatives, Schiff bases, coumarin derivatives, naphthalene derivatives, BODIPY, BOPHY, naphthalimide, pyrene, dicyanoisophorone, bromophenol, benzothiazole flavonol, carbonitrile, pyrazole, quinoline, resorufin, hemicyanine, monothiosquaraine, cyanine, pyrimidine, peptide, and quantum/carbon dots probes. We discuss their detection capabilities, sensing mechanisms, limits of detection, as well as the strategies and approaches employed in their design. By focusing on recent studies conducted between 2022 and 2023, this review article offers valuable insights into the performance and advancements in the field of fluorescent chemosensors for Hg²⁺ ions detection.

Ratiometric fluorescence assay for sulfide ions with fluorescent MOF-based nanozyme

A novel ratiometric fluorescence strategy for sulfide ions (S^2-) analysis has been developed using metal-organic framework (MOF)-based nanozyme. NH₂-Cu-MOF displays blue fluorescence (λem = 435 nm) originating from 2-amino-1,4-benzenedicarboxylic acid ligand. Besides, it possesses oxidase-like activity due to Cu²⁺ node, which can trigger chromogenic reaction. o-Phenylenediamine (OPD), as a common enzyme substrate, can be oxidized by NH₂-Cu-MOF to form luminescent products (oxOPD) (λem = 570 nm). Inner filter effect occurs between oxOPD and MOF. Upon exposure to S^2-, oxidase-like activity of MOF is depressed significantly because of the generation of CuS. On one hand, the amount of free Cu²⁺ decreases, affecting the yielding of oxOPD. On the other hand, CuNPs with larger size are obtained during the oxidation-reduction reaction between Cu²⁺ and OPD, which show weaker autocatalytic ability for OPD oxidation. These result in the decrease and increase of intensities at 570 and 435 nm, respectively. This method exhibits sensitive and selective responses towards S^2- with LOD of 0.1 μM. Furthermore, such ratiometric strategy has been applied to detect S^2- in food samples.

Recent advances in fluorescent materials for mercury(ii) ion detection

Invading mercury would cause many serious health hazards such as kidney damage, genetic freak, and nerve injury to human body. Thus, developing highly efficient and convenient mercury detection methods is of great significance for environmental governance and protection of public health. Motivated by this problem, various testing technologies for detecting trace mercury in the environment, food, medicines or daily chemicals have been developed. Among them, the fluorescence sensing technology is a sensitive and efficient detection method for detecting Hg2+ ions due to its simple operation, rapid response and economic value. This review aims to discuss the recent advances in fluorescent materials for Hg2+ ion detection. We reviewed the Hg2+ sensing materials and divided them into seven categories according to the sensing mechanism: static quenching, photoinduced electron transfer, intramolecular charge transfer, aggregation-induced emission, metallophilic interaction, mercury-induced reactions and ligand-to-metal energy transfer. The challenges and prospects of fluorescent Hg2+ ion probes are briefly presented. We hope that this review can provide some new insights and guidance for the design and development of novel fluorescent Hg2+ ion probes to promote their applications.

A novel fluorescent probe based on a tripeptide-Cu(II) complex system for detection of histidine and its application on test strips and smartphone

Herein, we reported a novel peptide-based fluorescent probe DSSH for highly selective and sensitive detections of both Cu²⁺ and _l-histidine (_l-His). DSSH exhibited different color changes and fluorescence "on-off" response toward Cu²⁺ with a 2:1 binding stoichiometry, and the limit of detection (LOD) for Cu²⁺ was calculated to be 22.9 nM. The in situ formed DSSH-Cu²⁺ ensemble showed obvious fluorescence "off-on" response to _l-His based on replacement reaction with Cu²⁺, as well as the discernable color changes under 365 nm UV lamp irradiation with "naked eye". The specificity of Cu²⁺/_l-His interactions allowed _l-His to be determined without interference from other amino acids, and the detection limit of DSSH-Cu²⁺ ensemble response to _l-His was determined as 25.7 nM. Notably, DSSH was successfully applied for detecting Cu²⁺ and _l-His in RKO living cells owing to its remarkable fluorescence behavior and low cytotoxicity. Test strips experiments suggested that DSSH can recognize Cu²⁺ and _l-His together by a remarkable fluorescence change. More importantly, smartphone was combined with _l-His solutions of different concentrations and converted into digital values through RGB channels, which was successfully used for semi-quantitative identification of _l-His, and the limit of detection (LOD) was 0.97 μM.