MEISENHEIMER COMPLEX BETWEEN 2,4,6-TRINITROTOLUENE AND 3-AMINOPROPYLTRIETHOXYSILANE AND ITS USE FOR A PAPER-BASED SENSOR

Designing a Graphene Metasurface Organic Material Sensor for Detection of Organic Compounds in Wastewater

In many fields, such as environmental monitoring, food safety, and medical diagnostics, the identification of organic compounds is essential. It is crucial to create exceptionally sensitive and selective sensors for the detection of organic compounds in order to safeguard the environment and human health. Due to its outstanding electrical, mechanical, and chemical characteristics, the two-dimensional carbon substance graphene has recently attracted much attention for use in sensing applications. The purpose of this research is to create an organic material sensor made from graphene for the detection of organic substances like phenol, ethanol, methanol, chloroform, etc. Due to its high surface-to-volume ratio and potent interactions with organic molecules, graphene improves the sensor's performance while the metasurface structure enables the design of highly sensitive and selective sensing elements. The suggested sensor is highly sensitive and accurate at detecting a broad spectrum of organic molecules, making it appropriate for a number of applications. The creation of this sensor has the potential to have a substantial impact on the field of organic sensing and increase the safety of food, medicine, and the environment. The graphene metasurface organic material sensor (GMOMS) was categorized into three types denoted as GMOMS1, GMOMS2, and GMOMS3 based on the specific application of the graphene chemical potential (GCP). In GMOMS1, GCP was applied on both the CSRR and CS surfaces. In GMOMS2, GCP was applied to the CS surface and the surrounding outer region of the CSRR. In GMOMS3, GCP was applied to the CSRR and the surrounding outer region of the CSRR surface. The results show that all three designs exhibit high relative sensitivity, with the maximum values ranging from 227 GHz/RIU achieved by GMOMS1 to 4318 GHz/RIU achieved by GMOMS3. The FOM values achieved for all the designs range from 2.038 RIU-1 achieved by GMOMS2 to 31.52 RIU-1 achieved by GMOMS3, which is considered ideal in this paper.

Sensitive and selective impedimetric determination of TNT using RSM-CCD optimization

Detection of trace amounts of 2,4,6-Trinitrotoluene as a widely used explosive in the military and industrial sectors is of vital importance due to security and environmental concerns. The sensitive and selective measurement characteristics of the compound still is considered a challenge for analytical chemists. Unlike conventional optical and electrochemical methods, the electrochemical impedance spectroscopy technique (EIS), has a very high sensitivity, but it faces a significant challenge in that it requires complex and expensive steps to modify the electrode surface with selective agents. We reported the design and construction of an inexpensive, simple, sensitive, and selective impedimetric electrochemical TNT sensor based on the formation of a Meisenheimer complex between magnetic multiwalled carbon nanotubes modified with aminopropyl triethoxysilane (MMWCNTs @ APTES) and TNT. The formation of the mentioned charge transfer complex at the electrode-solution interface blocks the electrode surface and disrupts the charge transfer in [(Fe (CN) ₆)] ^3-/4- redox probe system. Charge transfer resistance changes (ΔR_CT) were used as an analytical response that corresponded to TNT concentration. To investigate the influence of effective parameters on the electrode response, such as pH, contact time, and modifier percentage, the response surface methodology based on central composite design (RSM-CCD) was used. The calibration curve was achieved in the range of 1-500 nM with a detection limit of 0.15 nM under optimal conditions, which included pH of 8.29, contact time of 479 s, and modifier percentage of 12.38% (w/w). The selectivity of the constructed electrode towards several nitroaromatic species was investigated, and no significant interference was found. Finally, the proposed sensor was able to successfully measure TNT in various water samples with satisfactory recovery percentages.

Fabrication of flexible AuNPs@ polyimide heating chips for in situ explosives SERS sensing in nature samples

In this study, highly sensitive flexible AuNPs@ polyimide SERS heating chips (APHC) were fabricated for in situ collecting and detecting TNT. Large-scale AuNPs arrays were synthesized by liquid-liquid interface self-assembly and transferred to polyimide heating film as SERS substrates. 4-ATP and AgNPs functionalized on APHC were used as capture means and signal amplifiers, combining with TNT to form the AuNPs-TNT-AgNPs "sandwich" structure. This flexible APHC chip showed high sensitivity as enhancement factor was 5.5×10⁵, and good repeatability and stability (RSD<10%). It was applied to detect TNT solutions with a low concentration of 10^-9 M, and showed a good linear response in the range from 10^-5 to 10^-9 M (R² = 0.986). In addition, the detection method also had good selectivity and no response to various TNT analogs. More important, combing with the thermal enrichment strategy, TNT dispersed in environmental samples such as soil, fruit and clothing would be enriched as vapor then collected and detected by APHC. This APHC device shows great potential for in situ sensing platforms, due to its sensitivity, high efficiency, and excellent portability.

Mesoporous Silica Nanoparticles Coated with Carboxymethyl Chitosan for 5-Fluorouracil Ocular Delivery: Characterization, In Vitro and In Vivo Studies

This study investigates the development of topically applied non-invasive amino-functionalized silica nanoparticles (AMSN) and O-Carboxymethyl chitosan-coated AMSN (AMSN-CMC) for ocular delivery of 5-Fluorouracil (5-FU). Particle characterization was performed by the DLS technique (Zeta-Sizer), and structural morphology was examined by SEM and TEM. The drug encapsulation and loading were determined by the indirect method using HPLC. Physicochemical characterizations were performed by NMR, TGA, FTIR, and PXRD. In vitro release was conducted through a dialysis membrane in PBS (pH 7.4) using modified Vertical Franz diffusion cells. The mucoadhesion ability of the prepared nanoparticles was tested using the particle method by evaluating the change in zeta potential. The transcorneal permeabilities of 5-FU from AMNS-FU and AMSN-CMC-FU gel formulations were estimated through excised goat cornea and compared to that of 5-FU gel formulation. Eye irritation and ocular pharmacokinetic studies from gel formulations were evaluated in rabbit eyes. The optimum formulation of AMSN-CMC-FU was found to be nanoparticles with a particle size of 249.4 nm with a polydispersity of 0.429, encapsulation efficiency of 25.8 ± 5.8%, and drug loading capacity of 5.2 ± 1.2%. NMR spectra confirmed the coating of AMSN with the CMC layer. In addition, TGA, FTIR, and PXRD confirmed the drug loading inside the AMSN-CMC. Release profiles showed 100% of the drug was released from the 5-FU gel within 4 h, while AMSN-FU gel released 20.8% of the drug and AMSN-CMC-FU gel released around 55.6% after 4 h. AMSN-CMC-FU initially exhibited a 2.45-fold increase in transcorneal flux and apparent permeation of 5-FU compared to 5-FU gel, indicating a better corneal permeation. Higher bioavailability of AMSN-FU and AMSN-CMC-FU gel formulations was found compared to 5-FU gel in the ocular pharmacokinetic study with superior pharmacokinetics parameters of AMSN-CMC-FU gel. AMSN-CMC-FU showed 1.52- and 6.14-fold higher AUC0-inf in comparison to AMSN-FU and 5-FU gel, respectively. AMSN-CMC-FU gel and AMSN-FU gel were "minimally irritating" to rabbit eyes but showed minimal eye irritation potency in comparison to the 5 FU gel. Thus, the 5-FU loaded in AMSN-CMC gel could be used as a topical formulation for the treatment of ocular cancer.

Impedimetric detection of 2,4,6-trinitrotoluene using surface-functionalized halloysite nanotubes

Herein, we report the application of amine-surface-functionalized halloysite nanotubes (HAs) as active materials for the quantitative detection of 2,4,6-trinitrotoluene (TNT). The findings indicated that HA could selectively capture TNT via a strong reaction between the amine groups on its surface and the TNT molecules. Plate electrodes were fabricated from HA to evaluate its TNT-sensing capacity by electrochemical impedance spectroscopy. Upon binding with TNT, the proton conductivity on the HA plate electrodes increased linearly with the TNT concentration from 1.0 × 10⁻¹¹ M to 1.0 × 10⁻⁴ M. The HA plate electrodes exhibited good sensitivity with a detection limit of 1.05 × 10⁻¹² M. Subsequently, the cycling measurements of the TNT binding/removal were performed on the HA plate electrode, and the material exhibited high stability, good regenerative ability, and good reversibility without a significant decrease in efficiency. The present work highlights the significant application potential of HAs for the electrochemical detection of TNT.

Amine-surface-functionalized halloysite nanotubes are used for electrochemical sensing TNT.

Melamine functionalised multiwalled carbon nanotubes (M-MWCNTs) as a metal-free electrocatalyst for simultaneous determination of 4-nitrophenol and nitrofurantoin

An innovative melamine functionalised multiwalled carbon nanotube (M-MWCNTs) based electrochemical sensor has been developed for the determination of environmental nitro-aromatic pollutants, such as 4-nitrophenol (4-NP) and nitrofurantoin (NFT).

Colorimetric optical nanosensors for trace explosive detection using metal nanoparticles: advances, pitfalls, and future perspective

Warfare threats and acts of terror are challenging situations encountered by defense agencies across the globe and are of growing concern to the general public, and security-minded policy makers. Detecting ultra-low quantities of explosive compounds in remote locations or under harsh conditions for anti-terror purposes as well as the environmental monitoring of residual or discarded explosives in soil, remains a major challenge. The use of metal nanoparticles (NPs) for trace explosive detection has drawn considerable interest in recent years. For nano-based explosive sensor devices to meet real-life operational demands, analytical parameters such as, long-shelf life, stability under harsh conditions, ease-of-use, high sensitivity, excellent selectivity, and rapid signal response must be met. Generally, the analytical performance of colorimetric-based nanosensor systems is strongly dependent on the surface properties of the nanomaterial used in the colorimetric assay. The size and shape properties of metal NPs, surface functionalisation efficiency, and assay fabrication methods, are factors that influence the efficacy of colorimetric explosive nanosensor systems. This review reports on the design and analytical performances of colorimetric explosive sensor systems using metal NPs as optical signal transducers. The challenges of trace explosive detection, advances in metal NP colorimetric explosive design, limitations of each methods, and possible strategies to mitigate the problems are discussed.

A Simple, Rapid and Low-cost 3-Aminopropyltriethoxysilane (APTES)-based Surface Plasmon Resonance Sensor for TNT Explosive Detection

In this study, a simple, one-step organic molecule 3-aminopropyltriethoxysilane (APTES) functionalized surface plasmon resonance (SPR) sensor was developed. APTES as an organic ligand immobilized on the SPR sensor chip was used to form the Meisenheimer complex with 2,4,6-trinitrotoluene (TNT). The results of using the APTES-based SPR sensor chip show a highly selective and sensitive (ppb level: parts per billion) detection of TNT explosive. The sensor is expected to have potential for application in the fast screening of the TNT explosive.

Colorimetric sensors and nanoprobes for characterizing antioxidant and energetic substances

The development of analytical techniques for antioxidant compounds is important, because antioxidants that can inactivate reactive species and radicals are health-beneficial compounds, also used in the preservation of food and protection of almost every kind of organic substance from oxidation. Energetic substances include explosives, pyrotechnics, propellants and fuels, and their determination at bulk/trace levels is important for the safety and well-being of modern societies exposed to various security threats. Most of the time, in field/on site detection of these important analytes necessitates the use of colorimetric sensors and probes enabling naked-eye detection, or low-cost and easy-to-use fluorometric sensors. The use of nanosensors brings important advantages to this field of analytical chemistry due to their various physico-chemical advantages of increased surface area, surface plasmon resonance absorption of noble metal nanoparticles, and superior enzyme-mimic catalytic properties. Thus, this critical review focuses on the design strategies for colorimetric sensors and nanoprobes in characterizing antioxidant and energetic substances. In this regard, the main themes and properties in optical sensor design are defined and classified. Nanomaterial-based optical sensors/probes are discussed with respect to their mechanisms of operation, namely formation and growth of noble metal nanoparticles, their aggregation and disaggregation, displacement of active constituents by complexation or electrostatic interaction, miscellaneous mechanisms, and the choice of metallic oxide nanoparticles taking part in such formulations.

Recent Developments in the Field of Explosive Trace Detection

Explosive trace detection (ETD) technologies play a vital role in maintaining national security. ETD remains an active research area with many analytical techniques in operational use. This review details the latest advances in animal olfactory, ion mobility spectrometry (IMS), and Raman and colorimetric detection methods. Developments in optical, biological, electrochemical, mass, and thermal sensors are also covered in addition to the use of nanomaterials technology. Commercially available systems are presented as examples of current detection capabilities and as benchmarks for improvement. Attention is also drawn to recent collaborative projects involving government, academia, and industry to highlight the emergence of multimodal screening approaches and applications. The objective of the review is to provide a comprehensive overview of ETD by highlighting challenges in ETD and providing an understanding of the principles, advantages, and limitations of each technology and relating this to current systems.

A novel SERS selective detection sensor for trace trinitrotoluene based on meisenheimer complex of monoethanolamine molecule

Trinitrotoluene (TNT) is a primary component in chemical explosives, making them a common focus in public safety detection. However, it is very difficult to achieve selective and sensitive detection of the TNT molecule in practical application. In the present study, a simple surface enhanced Raman scattering (SERS) sensing based on monoethanolamine (MEA) - modified gold nanoparticles (Au NPs) was expanded for high selectivity and sensitive detecting of TNT in an envelope, luggage, lake water, and clothing through a quickly sampling and detection process. The monoethanolamine molecule based on Meisenheimer complex lights up ultra-high Raman scattering of a nonresonant molecule on the superficial coat of gold nanoparticles. Using this detection sensor, a molecular bridge can be established to selectively detect trinitrotoluene with a detection limit of 21.47 pM. We were able to rapidly identification trinitrotoluene molecule with a powerful selective over the familiar interfering substances nitrophenol, picric acid, 2,4-dinitrophenol, and 2,4-dinitrotoluene. The outcome in this work supply an efficient solution to the test of trinitrotoluene and to establishing a SERS sensor analytical strategy. The studies have demonstrated that the MEA-Au NPs based SERS sensing can be potentially used in field detection the trace amount of chemical explosives for public security.

Tb-doped BSA-gold nanoclusters as a bimodal probe for the selective detection of TNT

Trinitrotoluene (TNT) is a widely used explosive belonging to the family of nitroaromatic compounds, and its misuse poses a significant threat to society. Herein, we propose a Tb-BSA-AuNC fluorescent and colorimetric sensing probe for the selective onsite detection of TNT in the aqueous phase. Tb-doped BSA-protected gold nanoclusters (Tb-BSA-AuNCs) were synthesized by a microwave-assisted method, and TNT detection was carried out utilizing the chemistry of Meisenheimer complex formation. Tb doping of gold nanoclusters was demonstrated to facilitate better electron shuttling effects and thereby improve the efficiency of complex formation between the TNT and gold nanoclusters. A paper strip assay was also developed for TNT detection with the designed probe. Limits of detection and quantification of 0.2136 mM and 0.7120 mM, respectively, were achieved. Graphical abstract.

Biomimetic Sensitive Elements for 2,4,6-Trinitrotoluene Tested on Multi-Layered Sensors

In spite of technological progress, most of the current techniques for 2,4,6-trinitrotoluene (TNT) detection are time consuming due to laborious sensor preparation. Thereby, the aim of this work was to enlarge the knowledge for preparing sensitive elements for TNT with the aid of molecular imprinting; a known technique used to deliver biomimetic materials. The study first depicts the auto-assembly mechanism of (TNT) with functional diamino-silanes (i.e., N-(2-aminoethyl)-3-aminopropyl methyl dimethoxysilane), via “double” Meisenheimer complexes. This mechanism is being described herein for the first time and applied further to obtain molecularly imprinted polymer (MIP) films for TNT recognition. For testing the potential application of films as chemical sensor elements, typical rebinding assays of TNT in a liquid state and the rebinding of TNT in a vapor state, using multilayered sensor chips composed of quartz-chromium (Cr)-gold (Au)-titanium oxide (TiO2), were employed. Batch rebinding experiments have shown that thinner films were more efficient on retaining TNT molecules in the first five min, with a specificity of about 1.90. The quartz-Cr-Au-TiO2-MIP capacitive sensors, tested in vapor state, registered short response times (less than 25 s), low sensitivity to humidity and high specificity for TNT.

A down converting serine-functionalised NaYF4:Ce3+/Gd3+/Eu3+@NaGdF4:Tb3+ photoluminescent probe for chemical sensing of explosive nitroaromatic compounds

In this contribution, we explored a novel serine-functionalised NaYF₄:Ce³⁺/Gd³⁺/Eu³⁺@NaGdF₄:Tb³⁺ core–shell nanophosphor as a down-converting photoluminescent probe for efficient sensing of nitroaromatic explosives.

13C and 15N NMR identification of product compound classes from aqueous and solid phase photodegradation of 2,4,6-trinitrotoluene

Photolysis is one of the main transformation pathways for 2,4,6-trinitrotoluene (TNT) released into the environment. Upon exposure to sunlight, TNT is known to undergo both oxidation and reduction reactions with release of nitrite, nitrate, and ammonium ions, followed by condensation reactions of the oxidation and reduction products. In this study, compound classes of transformation products from the aqueous and solid phase photodegradation of 2,4,6-trinitrotoluene (TNT) have been identified by liquid and solid state 13C and 15N NMR. Aqueous phase experiments were performed on saturated solutions of T15NT in deionized water, natural pond water (pH = 8.3, DOC = 3.0 mg/L), pH 8.0 buffer solution, and in the presence of Suwannee River Natural Organic Matter (SRNOM; pH = 3.7), using a Pyrex-filtered medium pressure mercury lamp. Natural sunlight irradiations were performed on TNT in the solid phase and dissolved in the pond water. In deionized water, carboxylic acid, aldehyde, aromatic amine, primary amide, azoxy, nitrosophenol, and azo compounds were formed. 15N NMR spectra exhibited major peaks centered at 128 to 138 ppm, which are in the range of phenylhydroxylamine and secondary amide nitrogens. The secondary amides are proposed to represent benzanilides, which would arise from photochemical rearrangement of nitrones formed from the condensation of benzaldehyde and phenylhydroxylamine derivatives of TNT. The same compound classes were formed from sunlight irradiation of TNT in the solid phase. Whereas carboxylic acids, aldehydes, aromatic amines, phenylhydroxylamines, and amides were also formed from irradiation of TNT in pond water and in pH 8 buffer solution, azoxy and azo compound formation was inhibited. Solid state 15N NMR spectra of photolysates from the lamp irradiation of unlabeled 2,6-dinitrotoluene in deionized water also demonstrated the formation of aromatic amine, phenylhydroxylamine/ 2° amide, azoxy, and azo nitrogens.

Downconversion Luminescence-Based Nanosensor for Label-Free Detection of Explosives

We report a selective and sensitive nanosensor probe based on polyethylenimine (PEI)-capped downconverting nanophosphors β-NaYF₄:Gd³⁺,Tb³⁺@PEI for the detection of 2,4,6-trinitrotoluene (TNT), both in water and buffer media. These downconverting phosphors were synthesized via a hydrothermal route and are known to show excellent chemical, thermal, and photostability. They emit sharp emission peaks centered at ∼488, 544, 584, and 619 nm, among which the peak at ∼544 nm was remarkably quenched (∼90%) by the addition of TNT without giving any new emission peak. The sensing mechanism is based on the formation of a Meisenheimer complex between the electron-rich amine-functionalized β-NaYF₄:Gd³⁺,Tb³⁺ nanophosphors and electron-deficient TNT molecule, which was prominently visualized by the change in the color of the solution from whitish to brownish yellow, enabling visual detection, followed by luminescence resonance energy transfer between the nanophosphors and the complex. A linear range for TNT detection was obtained from 0.1 to 300 μM with a limit of detection as low as 119.9 nM. This method displayed excellent selectivity toward TNT over other nitroaromatic compounds, which had no influence on the detection. Moreover, various other classes of analytes, viz., amino acids, pesticides, and sugars, did not quench the luminescence intensity of the nanophosphors. This developed nanosensor probe possesses high, stable fluorescence brightness and capability for the selective and sensitive on-site recognition of TNT molecules in aqueous media, avoiding complicated strategies and instruments. Thus, this work promises to pave ways to many applications in the detection of ultratrace analytes.

Determining the kinetics of desolvation of a TNT/aniline solvate

The kinetic desolvation process of TNT/aniline solvates was investigated using various experimental techniques.

Diaminocyclohexane-Functionalized/Thioglycolic Acid-Modified Gold Nanoparticle-Based Colorimetric Sensing of Trinitrotoluene and Tetryl

Detection of explosive residues in soil and postblast debris is an important issue in sensor design for environmental and criminological purposes. An easy-to-use and low-cost gold nanoparticle (AuNP)-based colorimetric sensor was developed for the determination of nitroaromatic explosives, i.e., trinitrotoluene (TNT) and tetryl, capable of analyte detection at picomolar (pM) levels. The sensor nanoparticles were synthesized by functionalizing the negatively charged thioglycolic acid (TGA)-modified AuNPs with positively charged (±)- trans-1,2-diaminocyclohexane (DACH) at a carefully calculated pH. The working principle of the sensor is charge-transfer (CT) interaction between the electron-rich free amino (-NH₂) group of DACH and the electron-deficient -NO₂ groups of TNT/tetryl, added to possible nanoparticle agglomerization via electrostatic interaction of TNT-Meisenheimer anions with more than one cationic DACH-modified AuNP. The limit of detection (LOD) and limit of quantification (LOQ) of the sensor were 1.76 pM and 5.87 pM for TNT and 1.74 pM and 5.80 pM for tetryl, respectively. TNT, tetryl, and tetrytol, extracted from a nitroaromatic explosive-contaminated soil sample, were determined with the proposed sensor, yielding good recoveries. The sensor could be selectively applied to various mixtures of TNT with common energetic materials such as RDX, HMX, and PETN. Additionally, common soil ions (Cl^-, NO₃^-, SO₄^2-, K⁺, Mg²⁺, Ca²⁺, Cu²⁺, Fe²⁺, Fe³⁺, and Al³⁺) as well as detergents, sugar, sweeteners, acetylsalicylic acid (aspirin), caffeine, and paracetamol-based painkiller drugs, which may be used as camouflage materials for explosives, either had no adverse effects or removable interferences on the detection method. The developed method was statistically validated against a GC-MS literature method.

Amine-functionalized diatom frustules: a platform for specific and sensitive detection of nitroaromatic explosive derivative

In the present study, an attempt was made to develop a proof of concept for the detection of nitroaromatic explosive derivatives through the photoluminescence (PL) quenching process using functionalized diatom frustules as a sensing platform. The diatom frustules are composed of nanostructured, highly porous biogenic silica material and emit strong, visible blue PL upon UV excitation. PL-active biosilica was isolated from the marine diatom Nitzschia sp. and was amine-functionalized to develop a sensing platform. Functionalized diatom frustules were further characterized using field emission scanning electron microscope and a series of spectroscopic methods. When nitroaromatic compounds were bound to the functionalized diatom frustules biosilica, the PL intensity from the functionalized biosilica was partially quenched due to the electrophilic nature of the nitro (-NO) groups. The quenching process confirmed the Meisenheimer complex formation and was investigated by using Fourier transform infrared spectroscopy and time-resolved photoluminescence studies. The developed platform was further evaluated for its sensitivity and specificity, and the limit of detection (LOD) of the assay was determined as 1 μM for a series of nitroaromatic explosive compounds. In conclusion, the developed sensing platform will have great utility in the development of on-site detection platforms for sensitive detection of warfare explosive nitroaromatic compounds from the environment.

Ethylenediamine mediated luminescence enhancement of pollutant derivatized carbon quantum dots for intracellular trinitrotoluene detection: soot to shine

Vehicle-generated toxic pollutants are composed of gaseous smoke and particulate byproducts accumulated as a black substance at its exhaust. This particulate matter (soot) is utilized for the green synthesis of highly stable, non-toxic, environment friendly, carbon quantum dots (CQD). The CQDs are synthesized via the simple hydrothermal route in the absence (C1) and presence (C2) of oxidants. The as-synthesized CQDs are amine functionalized using ethylenediamine. The amine functionalized CQDs (C1N and C2N) are explored for trinitrotoluene detection. From transmission electron microscopy, the average size of C1 and C2 was found to be about 4.2 nm and 5.6 nm respectively. The incorporation of amine groups lead to an increase in quantum yields from 5.63% to 12.7% for C1 and from 3.25% to 8.48% for C2 QDs. A limit of detection (LOD) of 13 ppb was displayed by C1N while the LODs of 11 ppb and 4.97 ppb were delivered by C2N at λ_ex 370 nm and λ_ex 420 nm respectively. The Stern–Volmer constant for C1N is 2.02 × 10⁶ M⁻¹ while for C2N at λ_ex 370 nm and λ_ex 420 nm is 0.38 × 10⁶ M⁻¹ and 0.48 × 10⁶ M⁻¹ respectively. Furthermore, C1N presents high selectivity for TNT compared to C2N. Owing to their higher luminescence, C1N particles are successfully demonstrated for their applicability in intracellular TNT detection.

Vehicle-generated toxic pollutants are composed of gaseous smoke and particulate byproducts accumulated as a black substance at its exhaust.

Smartphone-Enabled Colorimetric Trinitrotoluene Detection Using Amine-Trapped Polydimethylsiloxane Membranes

A smartphone-enabled platform for easy and portably colorimetric analysis of 2,4,6-trinitrotoluene (TNT) using amine-trapped PDMS is designed and implemented. The amine-trapped polydimethylsiloxane (PDMS) is simply prepared by immersing the cured PDMS in aminosilane solutions forming an amine-containing polymer. After contacting with TNT-containing solutions, the colorless PDMS showed a rapid colorimetric change which can be easily identified by the naked eye. The amine-trapped PDMS was carefully optimized to achieve visible detection of TNT at concentrations as low as 1 μM. Using an integrated camera in the smartphone, pictures of colored PDMS membranes can be analyzed by a home-developed mobile application. Thus, the TNT amount can be precisely quantified. Direct TNT detection in real samples (e.g., drinking, tap, and lake waters) is demonstrated as well. The smartphone-enabled colorimetric method using amine-trapped PDMS membranes realizes a convenient and efficient approach toward a portable system for field TNT detections.

Carbon dots on based folic acid coated with PAMAM dendrimer as platform for Pt(IV) detection

Carbon quantum dots (CQDs) coated with poly(amidoamine) (PAMAM-NH2) dendrimer are prepared from folic acid and phosphoric acid under a hydrothermal procedure. The obtained nanoparticles are successfully used as fluorescent sensor for Pt(IV) (in the form of chloroplatinate ion). CQDs possess many attractive features including uniform dispersion with average size about 13nm for unmodified particles and, ∼30nm when they are coated with PAMAM-NH2 dendrimer. The synthesized nanoparticles have been characterized by elemental analysis, attenuated total reflectance (ATR), X-ray photoelectron (XPS) and Raman spectroscopies, transmission electron microscopy (TEM), dynamic light scattering (DLS), and steady-state and life-time fluorescence. CQDs are used as fluorescent sensor of Pt(IV) ion in aqueous media showing linear quenching effect of their fluorescence. The results obtained demonstrated a limit of detection of 657nM with an accuracy of the method of 0.13% (as RSD, n=10) and sensitivity of 78nM. Moreover, with the presence of other interference species, good results are obtained when applied in real samples from platinum nanoparticles synthesis. The dissolved platinum ions can be quantified in the range 6-96μM with an accuracy of 2.5%.

Detection of nitroaromatic explosives using π-electron rich luminescent polymeric nanocomposites

Novel electron rich luminescent nanocomposite polymers for sensing nitroaromatic explosives by PET and FRET phenomenon.