Functionalization of small black phosphorus nanoparticles for targeted imaging and photothermal therapy of cancer

Rapidly molded sodium alginate/soy protein adhesive hydrogel with 808-nm laser inhibition of infected wounds

Infected wounds produce pus and heal slowly. To address this issue, we developed a rapid-setting SP/SA@BP-C hydrogel by combining sodium alginate (SA) and soy protein (SP) with black phosphorus (BP) grafted with clarithromycin (Cla) and incorporating Ca2+ for chelation. This hydrogel dressing exhibits excellent photothermal (PT) and photodynamic (PD) bacteriostatic effects without biotoxicity, making it suitable for treating infected wounds. Characterization confirmed its successful fabrication, and the bacteriostatic effect demonstrated over 99 % efficacy through the synergistic effects of PT, PD, and Cla. Cellular studies indicated nontoxicity and a promoting effect on cell proliferation (121.6 %). In the mouse-infected wound model, the hydrogel led to complete healing in 12 days, with good recovery of the skin's superficial dermal layer and appendages. Consequently, SP/SA@BP-C is a natural hydrogel dressing with promising properties.

Ultrathin BSA-Stabilized Black Phosphorous Nanoreactor Boosts Mild-Temperature Photothermal Therapy Through Modulation of Cellular Self-Defense Fate

Mild-temperature photothermal therapy (mild-PTT, 42-45 °C) offers a higher level of biosafety. However, its therapeutic effects are compromised by the heat shock response (HSR), a cellular self-defense mechanism, which triggers the overexpression of heat shock proteins (HSPs) with the capacity of repairing the damaged tumor cells. Herein, this work fabricates a novel nanoreactor by incorporating up-conversion nanoparticles (UCNPs), chlorin e6 (Ce6), and glucose oxidase (GOx) onto the ultrathin black phosphorus nanosheet (BPNS) (denoted as GOx-BUC). This nanoreactor amplifies mild-PTT effects under irradiation with an 808 nm laser, modulating HSPs-mediated cellular self-defense fate. On one hand, upon irradiation with a 980 nm laser, UCNPs can transfer energy to excite Ce6, leading to the generation of ROS burst, which achieves indiscriminate damage to HSPs activity in deeper tumor tissues. On the other hand, GOx can consume glucose, thereby depleting the ATP energy supply and further suppressing HSPs expression. Consequently, GOx-BUC exhibits excellent anti-tumor efficacy under mild temperature in a human colorectal cancer mouse model, resulting in complete tumor inhibition with negligible side effects. This black phosphorous nanoreactor, featuring dual-track HSPs destruction functionality, introduces novel perspectives for enhancing mild-PTT effectiveness while maintaining high biosafety.

Nanoscale Evaluation of the Degradation Stability of Black Phosphorus Nanosheets Functionalized with PEG and Glutathione-Stabilized Doxorubicin Drug-Loaded Gold Nanoparticles in Real Functionalized System

Two-dimensional black phosphorus (2D BP) has attracted significant research interest in the field of biomedical applications due to its unique characteristics, including high biocompatibility, impressive drug-loading efficiency, phototherapeutic ability, and minimal side effects. However, its puckered honeycomb lattice structure with lone-pair electrons of BP leads to higher sensitivity and chemical reactivity towards H2O and O2 molecules, resulting in the degradation of the structure with physical and chemical changes. In our study, we synthesize polyethylene glycol (PEG) and glutathione-stabilized doxorubicin drug-assembled Au nanoparticle (Au-GSH-DOX)-functionalized BP nanosheets (BP-PEG@Au-GSH-DOX) with improved degradation stability, biocompatibility, and tumor-targeting ability. Transmission electron microscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy indicate the nanoscale degradation behavior of synthesized nanoconjugates in three different environmental exposure conditions, and the results demonstrate the remarkable nanoscale stability of BP-PEG@Au-GSH-DOX against the degradation of BP, which provides significant interest in employing 2D BP-based nanotherapeutic agents for tumor-targeted cancer phototherapy.

NK cell-based tumor immunotherapy

Natural killer (NK) cells display a unique inherent ability to identify and eliminate virus-infected cells and tumor cells. They are particularly powerful for elimination of hematological cancers, and have attracted considerable interests for therapy of solid tumors. However, the treatment of solid tumors with NK cells are less effective, which can be attributed to the very complicated immunosuppressive microenvironment that may lead to the inactivation, insufficient expansion, short life, and the poor tumor infiltration of NK cells. Fortunately, the development of advanced nanotechnology has provided potential solutions to these issues, and could improve the immunotherapy efficacy of NK cells. In this review, we summarize the activation and inhibition mechanisms of NK cells in solid tumors, and the recent advances in NK cell-based tumor immunotherapy boosted by diverse nanomaterials. We also propose the challenges and opportunities for the clinical application of NK cell-based tumor immunotherapy.

2D Nanomaterials and Their Drug Conjugates for Phototherapy and Magnetic Hyperthermia Therapy of Cancer and Infections

Photothermal therapy (PTT) and magnetic hyperthermia therapy (MHT) using 2D nanomaterials (2DnMat) have recently emerged as promising alternative treatments for cancer and bacterial infections, both important global health challenges. The present review intends to provide not only a comprehensive overview, but also an integrative approach of the state-of-the-art knowledge on 2DnMat for PTT and MHT of cancer and infections. High surface area, high extinction coefficient in near-infra-red (NIR) region, responsiveness to external stimuli like magnetic fields, and the endless possibilities of surface functionalization, make 2DnMat ideal platforms for PTT and MHT. Most of these materials are biocompatible with mammalian cells, presenting some cytotoxicity against bacteria. However, each material must be comprehensively characterized physiochemically and biologically, since small variations can have significant biological impact. Highly efficient and selective in vitro and in vivo PTTs for the treatment of cancer and infections are reported, using a wide range of 2DnMat concentrations and incubation times. MHT is described to be more effective against bacterial infections than against cancer therapy. Despite the promising results attained, some challenges remain, such as improving 2DnMat conjugation with drugs, understanding their in vivo biodegradation, and refining the evaluation criteria to measure PTT or MHT effects.

Black Phosphorus - A Rising Star in the Antibacterial Materials

Antibiotics are the most commonly used means to treat bacterial infection at present, but the unreasonable use of antibiotics induces the generation of drug-resistant bacteria, which causes great problems for their clinical application. In recent years, researchers have found that nanomaterials with high specific surface area, special structure, photocatalytic activity and other properties show great potential in bacterial infection control. Among them, black phosphorus (BP), a two-dimensional (2D) nanomaterial, has been widely reported in the treatment of tumor and bone defect due to its excellent biocompatibility and degradability. However, the current theory about the antibacterial properties of BP is still insufficient, and the relevant mechanism of action needs to be further studied. In this paper, we introduced the structure and properties of BP, elaborated the mechanism of BP in bacterial infection, and systematically reviewed the application of BP composite materials in the field of antibacterial. At the same time, we also discussed the challenges faced by the current research and application of BP, which laid a solid theoretical foundation for the further study of BP in the future.

Smart nanoparticles for cancer therapy

Smart nanoparticles, which can respond to biological cues or be guided by them, are emerging as a promising drug delivery platform for precise cancer treatment. The field of oncology, nanotechnology, and biomedicine has witnessed rapid progress, leading to innovative developments in smart nanoparticles for safer and more effective cancer therapy. In this review, we will highlight recent advancements in smart nanoparticles, including polymeric nanoparticles, dendrimers, micelles, liposomes, protein nanoparticles, cell membrane nanoparticles, mesoporous silica nanoparticles, gold nanoparticles, iron oxide nanoparticles, quantum dots, carbon nanotubes, black phosphorus, MOF nanoparticles, and others. We will focus on their classification, structures, synthesis, and intelligent features. These smart nanoparticles possess the ability to respond to various external and internal stimuli, such as enzymes, pH, temperature, optics, and magnetism, making them intelligent systems. Additionally, this review will explore the latest studies on tumor targeting by functionalizing the surfaces of smart nanoparticles with tumor-specific ligands like antibodies, peptides, transferrin, and folic acid. We will also summarize different types of drug delivery options, including small molecules, peptides, proteins, nucleic acids, and even living cells, for their potential use in cancer therapy. While the potential of smart nanoparticles is promising, we will also acknowledge the challenges and clinical prospects associated with their use. Finally, we will propose a blueprint that involves the use of artificial intelligence-powered nanoparticles in cancer treatment applications. By harnessing the potential of smart nanoparticles, this review aims to usher in a new era of precise and personalized cancer therapy, providing patients with individualized treatment options.

Safe Etching Route of Nb2SnC for the Synthesis of Two-Dimensional Nb2CTx MXene: An Electrode Material with Improved Electrochemical Performance

In this study, low-temperature synthesis of a Nb₂SnC non-MAX phase was carried out via solid-state reaction, and a novel approach was introduced to synthesize 2D Nb₂CT_x MXenes through selective etching of Sn from Nb₂SnC using mild phosphoric acid. Our work provides valuable insights into the field of 2D MXenes and their potential for energy storage applications. Various techniques, including XRD, SEM, TEM, EDS, and XPS, were used to characterize the samples and determine their crystal structures and chemical compositions. SEM images revealed a two-dimensional layered structure of Nb₂CT_x, which is consistent with the expected morphology of MXenes. The synthesized Nb₂CT_x showed a high specific capacitance of 502.97 Fg^-1 at 1 Ag^-1, demonstrating its potential for high-performance energy storage applications. The approach used in this study is low-cost and could lead to the development of new energy storage materials. Our study contributes to the field by introducing a unique method to synthesize 2D Nb₂CT_x MXenes and highlights its potential for practical applications.

Nanoconstructs for theranostic application in cancer: Challenges and strategies to enhance the delivery

Nanoconstructs are made up of nanoparticles and ligands, which can deliver the loaded cargo at the desired site of action. Various nanoparticulate platforms have been utilized for the preparation of nanoconstructs, which may serve both diagnostic as well as therapeutic purposes. Nanoconstructs are mostly used to overcome the limitations of cancer therapies, such as toxicity, nonspecific distribution of the drug, and uncontrolled release rate. The strategies employed during the design of nanoconstructs help improve the efficiency and specificity of loaded theranostic agents and make them a successful approach for cancer therapy. Nanoconstructs are designed with a sole purpose of targeting the requisite site, overcoming the barriers which hinders its right placement for desired benefit. Therefore, instead of classifying modes for delivery of nanoconstructs as actively or passively targeted systems, they are suitably classified as autonomous and nonautonomous types. At large, nanoconstructs offer numerous benefits, however they suffer from multiple challenges, too. Hence, to overcome such challenges computational modelling methods and artificial intelligence/machine learning processes are being explored. The current review provides an overview on attributes and applications offered by nanoconstructs as theranostic agent in cancer.

Advances in Single-component inorganic nanostructures for photoacoustic imaging guided photothermal therapy

Phototheranostic based on photothermal therapy (PTT) and photoacoustic imaging (PAI), as one of avant-garde medical techniques, have sparked growing attention because it allows noninvasive, deeply penetrative, and highly selective and effective therapy. Among a variety of phototheranostic nanoagents, single-component inorganic nanostructures are found to be novel and attractive PAI and PTT combined nanotheranostic agents and received tremendous attention, which not only exhibit structural controllability, high tunability in physiochemical properties, size-dependent optical properties, high reproducibility, simple composition, easy functionalization, and simple synthesis process, but also can be endowed with multiple therapeutic and imaging functions, realizing the superior therapy result along with bringing less foreign materials into body, reducing systemic side effects and improving the bioavailability. In this review, according to their synthetic components, conventional single-component inorganic nanostructures are divided into metallic nanostructures, metal dichalcogenides, metal oxides, carbon based nanostructures, upconversion nanoparticles (UCNPs), metal organic frameworks (MOFs), MXenes, graphdiyne and other nanostructures. On the basis of this category, their detailed applications in PAI guide PTT of tumor treatment are systematically reviewed, including synthesis strategies, corresponding performances, and cancer diagnosis and therapeutic efficacy. Before these, the factors to influence on photothermal effect and the principle of in vivo PAI are briefly presented. Finally, we also comprehensively and thoroughly discussed the limitation, potential barriers, future perspectives for research and clinical translation of this single-component inorganic nanoagent in biomedical therapeutics.

NIR-II fluorescence visualization of ultrasound-induced blood-brain barrier opening for enhanced photothermal therapy against glioblastoma using indocyanine green microbubbles

Focused ultrasound (FUS)-induced blood-brain barrier (BBB) opening is crucial for enhancing glioblastoma (GBM) therapies. However, an in vivo imaging approach with a high spatial-temporal resolution to monitor the BBB opening process in situ and synchronously is still lacking. Herein, we report the use of indocyanine green (ICG)-dopped microbubbles (MBs-ICG) for visualizing the FUS-induced BBB opening and enhancing the photothermal therapy (PTT) against GBM. The MBs-ICG show bright fluorescence in the second near-infrared window (NIR-II), ultrasound contrast, and ultrasound-induced size transformation properties. By virtue of complementary contrast properties, MBs-ICG can be successfully applied for cerebral vascular imaging with NIR-II fluorescence resolution of ∼168.9 μm and ultrasound penetration depth of ∼7 mm. We further demonstrate that MBs-ICG can be combined with FUS for in situ and synchronous visualization of the BBB opening with a NIR-II fluorescence signal-to-background ratio of 6.2 ± 1.2. Finally, our data show that the MBs-ICG transform into lipid-ICG nanoparticles under FUS irradiation, which then rapidly penetrate the tumor tissues within 10 min and enhance PTT in orthotopic GBM-bearing mice. The multifunctional MBs-ICG approach provides a novel paradigm for monitoring BBB opening and enhancing GBM therapy.

2D Hetero-Nanoconstructs of Black Phosphorus for Breast Cancer Theragnosis: Technological Advancements

As per global cancer statistics of 2020, female breast cancer is the most commonly diagnosed cancer and also the foremost cause of cancer death in women. Traditional treatments include a number of negative effects, making it necessary to investigate novel smart drug delivery methods and identify new therapeutic approaches. Efforts for developing novel strategies for breast cancer therapy are being devised worldwide by various research groups. Currently, two-dimensional black phosphorus nanosheets (BPNSs) have attracted considerable attention and are best suited for theranostic nanomedicine. Particularly, their characteristics, including drug loading efficacy, biocompatibility, optical, thermal, electrical, and phototherapeutic characteristics, support their growing demand as a potential substitute for graphene-based nanomaterials in biomedical applications. In this review, we have explained different platforms of BP nanomaterials for breast cancer management, their structures, functionalization approaches, and general methods of synthesis. Various characteristics of BP nanomaterials that make them suitable for cancer therapy and diagnosis, such as large surface area, nontoxicity, solubility, biodegradability, and excellent near-infrared (NIR) absorption capability, are discussed in the later sections. Next, we summarize targeting approaches using various strategies for effective therapy with BP nanoplatforms. Then, we describe applications of BP nanomaterials for breast cancer treatment, which include drug delivery, codelivery of drugs, photodynamic therapy, photothermal therapy, combined therapy, gene therapy, immunotherapy, and multidrug resistance reversal strategy. Finally, the present challenges and future aspects of BP nanomaterials are discussed.

4D Printing of Hydrogels: Innovation in Material Design and Emerging Smart Systems for Drug Delivery

Advancements in the material design of smart hydrogels have transformed the way therapeutic agents are encapsulated and released in biological environments. On the other hand, the expeditious development of 3D printing technologies has revolutionized the fabrication of hydrogel systems for biomedical applications. By combining these two aspects, 4D printing (i.e., 3D printing of smart hydrogels) has emerged as a new promising platform for the development of novel controlled drug delivery systems that can adapt and mimic natural physio-mechanical changes over time. This allows printed objects to transform from static to dynamic in response to various physiological and chemical interactions, meeting the needs of the healthcare industry. In this review, we provide an overview of innovation in material design for smart hydrogel systems, current technical approaches toward 4D printing, and emerging 4D printed novel structures for drug delivery applications. Finally, we discuss the existing challenges in 4D printing hydrogels for drug delivery and their prospects.

Hemin-loaded black phosphorus-based nanosystem for enhanced photodynamic therapy and a synergistic photothermally/photodynamically activated inflammatory immune response

The biocompatible nanosystem integrating hemin into black phosphorus nanosheets was ingeniously constructed through the easy modified strategy. Taking advantage of the enhanced permeability and retention (EPR) effect, the designed nanosystem could accumulate into the tumor location, leading to attractive cytotoxicity through the enhanced photodynamic therapy (PDT) ascribing to the catalytic oxygen supply and GSH depletion of hemin. Simultaneously, combining PDT and photothermal therapy (PTT) showed an apparent promotion in anti-tumor effect. Moreover, inflammatory response and immune activation amplified anti-tumor effect, which could compensate limitations of exogenous therapy (i.e., limited tissue depth and intensity-dependent curation effect) and potentiate the efficiency of the endogenous immune-activating behavior. Especially, the designed nanosystem degraded followed by being metabolized in the blood circulation. By and large, this constructed nanosystem provides the new insight into designing biocompatible nanomaterials and paves the ideal way for anti-tumor therapy. STATEMENT OF SIGNIFICANCE: Biocompatible nanomaterials-based synergistic tumor therapy offers the potential application prospect. Taking advantage of degradable black phosphorus, the nanosystem integrating hemin into black phosphorus for the enhanced photodynamic therapy and synergistic photothermal-photodynamic activating inflammation-immune response was developed and the results demonstrate that tumor growth was inhibited followed by activating inflammatory factors and leading to satisfactory immune response.

Molecular imaging nanoprobes for theranostic applications

As a non-invasive imaging monitoring method, molecular imaging can provide the location and expression level of disease signature biomolecules in vivo, leading to early diagnosis of relevant diseases, improved treatment strategies, and accurate assessment of treating efficacy. In recent years, a variety of nanosized imaging probes have been developed and intensively investigated in fundamental/translational research and clinical practice. Meanwhile, as an interdisciplinary discipline, this field combines many subjects of chemistry, medicine, biology, radiology, and material science, etc. The successful molecular imaging not only requires advanced imaging equipment, but also the synthesis of efficient imaging probes. However, limited summary has been reported for recent advances of nanoprobes. In this paper, we summarized the recent progress of three common and main types of nanosized molecular imaging probes, including ultrasound (US) imaging nanoprobes, magnetic resonance imaging (MRI) nanoprobes, and computed tomography (CT) imaging nanoprobes. The applications of molecular imaging nanoprobes were discussed in details. Finally, we provided an outlook on the development of next generation molecular imaging nanoprobes.

Exogenous Contrast Agents in Photoacoustic Imaging: An In Vivo Review for Tumor Imaging

The field of cancer theranostics has grown rapidly in the past decade and innovative 'biosmart' theranostic materials are being synthesized and studied to combat the fast growth of cancer metastases. While current state-of-the-art oncology imaging techniques have decreased mortality rates, patients still face a diminished quality of life due to treatment. Therefore, improved diagnostics are needed to define in vivo tumor growths on a molecular level to achieve image-guided therapies and tailored dosage needs. This review summarizes in vivo studies that utilize contrast agents within the field of photoacoustic imaging-a relatively new imaging modality-for tumor detection, with a special focus on imaging and transducer parameters. This paper also details the different types of contrast agents used in this novel diagnostic field, i.e., organic-based, metal/inorganic-based, and dye-based contrast agents. We conclude this review by discussing the challenges and future direction of photoacoustic imaging.

Targeting Killing of Tumor Cells Based on Isoelectric Point Suitable Nanoceria-rod with High Oxygen Vacancies

Nanozymes have great potential application in tumor treatment because of their good stability, high biocompatibility, easy preparation and versatility. However, it remains a challenge to design of highly active nanozyme...

Biodegradable L-lysine-modified amino black phosphorus/poly(l-lactide-coε-caprolactone) nanofibers with enhancements in hydrophilicity, shape recovery and osteodifferentiation properties

Biodegradable poly-(lactide-coε-caprolactone) (PLCL) scaffolds have opened new perspectives for tissue engineering due to their nontoxic and fascinating functionality. Herein, a black phosphorus-based biodegradable material with a combination of promising enhanced hydrophilicity, shape recovery and osteodifferentiation properties was proposed. First, amino black phosphorous (BP-NH₂) was prepared by a simple ball milling method. Then, L-lysine-modified black phosphorous (L-NH-BP) was formed by hydrogen bonding between L-lysine and amino BP and integrated into PLCL to form PLCL/L-NH-BP composite fibers. The scaffolds had excellent shape recovery and shape fixity properties. Moreover, based on gene expression and protein level assessment, the scaffolds could enhance the expression of alkaline phosphatase (ALP) and bone morphogenetic protein 2 (BMP2), simultaneously improving the mineralization ability of bone mesenchymal stem cells. Specifically, this new composite material was experimentally verified to be degradable under mild conditions. This strategy provided new insight into the design of multifunctional materials for diverse applications.

2D materials for bone therapy

Due to their prominent physicochemical properties, 2D materials are broadly applied in biomedicine. Currently, 2D materials have achieved great success in treating many diseases such as cancer and tissue engineering as well as bone therapy. Based on their different characteristics, 2D materials could function in various ways in different bone diseases. Herein, the application of 2D materials in bone tissue engineering, joint lubrication, infection of orthopedic implants, bone tumors, and osteoarthritis are firstly reviewed comprehensively together. Meanwhile, different mechanisms by which 2D materials function in each disease reviewed below are also reviewed in detail, which in turn reveals the versatile functions and application of 2D materials. At last, the outlook on how to further broaden applications of 2D materials in bone therapies based on their excellent properties is also discussed.

Black Phosphorus/Polymers: Status and Challenges

As a newly emerged mono-elemental nanomaterial, black phosphorus (BP) has been widely investigated for its fascinating physical properties, including layer-dependent tunable band gap (0.3-1.5 eV), high ON/OFF ratio (10⁴ ), high carrier mobility (10³ cm² V^-1 s^-1 ), excellent mechanical resistance, as well as special in-plane anisotropic optical, thermal, and vibrational characteristics. However, the instability caused by chemical degradation of its surface has posed a severe challenge for its further applications. A focused BP/polymer strategy has more recently been developed and implemented to hurdle this issue, so at present BP/polymers have been developed that exhibit enhanced stability, as well as outstanding optical, thermal, mechanical, and electrical properties. This has promoted researchers to further explore the potential applications of black phosphorous. In this review, the preparation processes and the key properties of BP/polymers are reviewed, followed by a detailed account of their diversified applications, including areas like optoelectronics, bio-medicine, and energy storage. Finally, in accordance with the current progress, the prospective challenges and future directions are highlighted and discussed.

Emerging two-dimensional monoelemental materials (Xenes): Fabrication, modification, and applications thereof in the field of bioimaging as nanocarriers

In recent years, more and more research enthusiasm has been devoted to the development of emerging two-dimensional (2D) monoelement materials (Xenes) and explored potential applications in various fields, especially biomedicine and bioimaging. The inspiring results attribute to their excellent physicochemical properties, including adjustable band gap, surface electronic layout characteristics, and so on, making it easier for surface modification in order to meet designated needs. As a popular interdisciplinary research frontier, a variety of methods for fabricating 2D Xenes have recently been adopted for pre-preparing future practical bioimaging applications, which implies that these materials will have broad clinical application prospects in the future. In this review, we will concentrate on the family of 2D Xenes and summarize their fabrication and modification methods firstly. Then, their applications in bioimaging as nanocarriers will be described according to the Periodic Table of Elements. In addition, current challenges and prospects for further clinical applications will be under discussion and use black phosphorus as a typical example. At last, general conclusion will be made that it is worth expecting that 2D Xenes will play a key role in the next generation of oncologic bioimaging in the future. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease Toxicology and Regulatory Issues in Nanomedicine > Toxicology of Nanomaterials Toxicology and Regulatory Issues in Nanomedicine > Regulatory and Policy Issues in Nanomedicine.

Light-Driven Self-Oscillating Actuators with Phototactic Locomotion Based on Black Phosphorus Heterostructure

Developing self-oscillating soft actuators that enable autonomous, continuous, and directional locomotion is significant in biomimetic soft robotics fields, but remains great challenging. Here, an untethered soft photoactuators based on covalently-bridged black phosphorus-carbon nanotubes heterostructure with self-oscillation and phototactic locomotion under constant light irradiation is designed. Owing to the good photothermal effect of black phosphorus heterostructure and thermal deformation of the actuator components, the new actuator assembled by heterostructured black phosphorus, polymer and paper produces light-driven reversible deformation with fast and large response. By using this actuator as mechanical power and designing a robot configuration with self-feedback loop to generate self-oscillation, an inchworm-like actuator that can crawl autonomously towards the light source is constructed. Moreover, due to the anisotropy and tailorability of the actuator, an artificial crab robot that can simulate the sideways locomotion of crabs and simultaneously change color under light irradiation is also realized.

Progress in the therapeutic applications of polymer-decorated black phosphorus and black phosphorus analog nanomaterials in biomedicine

Wonderful black phosphorus (BP) and some BP analogs (BPAs) have been increasingly studied for their biomedical applications owing to their fascinating properties and biodegradability, but opportunities and challenges have always coexisted in their study. Poor stability upon exposure to the natural environment is the major obstacle hampering their in vivo applications. BP/polymer and BPAs/polymer nanocomposites can not only efficiently prevent their oxidation and aggregation but also exhibit "biological activity" due to synergistic effects. In this review, we briefly describe the synthesis methods and stability strategies of BP/polymer and BPAs/polymer. Then, advances pertaining to their exciting therapeutic applications in various fields are systematically introduced, such as cancer therapy (phototherapy, drug delivery, and synergistic immunotherapy), bone regeneration, and neurogenesis. Some challenges for future clinical trials and possible directions for further study are finally discussed.

Synthesis, modification and bioapplications of nanoscale copper chalcogenides

Copper chalcogenides have a simple general formula, variable atomic ratios, and complicated crystal structures, which lead to their wealth of optical, electrical, and magnetic properties with great potential for wide applications ranging from energy conversion to the biomedical field. Herein, we summarize the recent advances in (1) the synthesis of size- and morphology tunable nanostructures by different methods; (2) surface modification and functionalization for different purposes; and (3) bioapplications for diagnosis and treatment of tumors by different imaging and therapy methods, as well as antibacterial applications. We also briefly discuss the future directions and challenges of copper chalcogenide nanoparticles in the biomedical field.

Current Advances in Black Phosphorus-Based Drug Delivery Systems for Cancer Therapy

Cancer has been one of the major threats to the lives of human beings for centuries. Traditional therapy is more or less faced with certain defects, such as poor targeting, easy degradation, high side effects, etc. Therefore, in order to improve the treatment efficiency of drugs, an intelligent drug delivery system (DDS) is considered as a promising solution strategy. Due to their special structure and large specific surface area, 2D materials are considered to be a good platform for drug delivery. Black phosphorus (BP), as a new star of the 2D family, is recommended to have the potential to construct DDS by virtue of its outstanding photothermal therapy (PTT), photodynamic therapy (PDT), and biodegradable properties. This tutorial review is intended to provide an introduction of the current advances in BP-based DDSs for cancer therapy, which covers topics from its construction, classified by the types of platforms, to the stimuli-responsive controlled drug release. Moreover, their cancer therapy applications including mono-, bi-, and multi-modal synergistic cancer therapy as well as the research of biocompatibility are also discussed. Finally, the current status and future prospects of BP-based DDSs for cancer therapy are summarized.

Current update on nanoplatforms as therapeutic and diagnostic tools: A review for the materials used as nanotheranostics and imaging modalities

In the last decade, the use of nanotheranostics as emerging diagnostic and therapeutic tools for various diseases, especially cancer, is held great attention. Up to date, several approaches have been employed in order to develop smart nanotheranostics, which combine bioactive targeting on specific tissues as well as diagnostic properties. The nanotheranostics can deliver therapeutic agents by concomitantly monitor the therapy response in real-time. Consequently, the possibility of over- or under-dosing is decreased. Various non-invasive imaging techniques have been used to quantitatively monitor the drug delivery processes. Radiolabeling of nanomaterials is widely used as powerful diagnostic approach on nuclear medicine imaging. In fact, various radiolabeled nanomaterials have been designed and developed for imaging tumors and other lesions due to their efficient characteristics. Inorganic nanoparticles as gold, silver, silica based nanomaterials or organic nanoparticles as polymers, carbon based nanomaterials, liposomes have been reported as multifunctional nanotheranostics. In this review, the imaging modalities according to their use in various diseases are summarized, providing special details for radiolabeling. In further, the most current nanotheranostics categorized via the used nanomaterials are also summed up. To conclude, this review can be beneficial for medical and pharmaceutical society as well as material scientists who work in the field of nanotheranostics since they can use this research as guide for producing newer and more efficient nanotheranostics.

Engineering Cu2−xS-conjugated upconverting nanocomposites for NIR-II light-induced enhanced chemodynamic/photothermal therapy of cancer

Cu2−xS-conjugated upconverting nanocomposites with an outstanding photothermal killing effect and a PT-enhanced CDT effect for NIR-II light-induced enhanced chemodynamic/photothermal therapy of cancer.

Surface modification of black phosphorus-based nanomaterials in biomedical applications: Strategies and recent advances

Black phosphorus-based nanomaterials (BPNMs), an emerging member of two-dimensional (2D) nanomaterials, possess excellent physicochemical properties and hold great potential for application in advanced nanomedicines. However, the bare BPNMs easily decrease their biomedical activities due to their degradability and in vivo interactions with biological macromolecules such as plasma proteins, largely restricting their biomedical application. A variety of surface modifications, via chemical, physical or biological approaches, have been developed for BPNMs to avoid these limitations and achieve stable, long-lasting and safe therapeutic effects, thus enlighten the development of the multifunctional BPNMs for more practical application in the field of biomedicine. The present review summarizes the recent advances in the surface modification of BPNMs and the resultant expansion of their biomedical applications. Focus is put on the strategy and method of modification while the effects incurred on the behavior and potential toxicity of BPNMs are also included. The future and challenge of the surface modification of the therapeutic BPNMs are finally discussed.

Multifunctional layered black phosphorene-based nanoplatform for disease diagnosis and treatment: a review

As an outstanding two-dimensional material, black phosphorene, has attracted significant attention in the biomedicine field due to its large surface area, strong optical absorption, distinct bioactivity, excellent biocompatibility, and high biodegradability. In this review, the preparation and properties of black phosphorene are summarized first. Thereafter, black phosphorene-based multifunctional platforms employed for the diagnosis and treatment of diseases, including cancer, bone injuries, brain diseases, progressive oxidative diseases, and kidney injury, are reviewed in detail. This review provides a better understanding of the exciting properties of black phosphorene, such as its high drug-loading efficiency, photothermal conversion capability, high 1O2 generation efficiency, and high electrical conductivity, as well as how these properties can be exploited in biomedicine. Finally, the research perspectives of black phosphorene are discussed.

Microfluidics-Assisted Surface Trifunctionalization of a Zeolitic Imidazolate Framework Nanocarrier for Targeted and Controllable Multitherapies of Tumors

Metal-organic framework (MOF)-based drug delivery nanosystems with both precise drug release and multidrug codelivery capabilities have emerged as promising candidates for cancer treatment. However, challenges are posed by the limited number of suitable payload types, uncontrollable drug leakage, and lack of chemical groups for postmodification. To overcome those challenges, we developed a core-shell nanocomposite composed of zeolitic imidazolate framework-90 (ZIF-90) coated with spermine-modified acetalated dextran (SAD) by a facile microfluidics-based nanoprecipitation method. This nanocomposite could serve as a multidrug storage reservoir for the loading of two drugs with distinct properties, where the hydrophilic doxorubicin (DOX) was coordinately attached to the ZIF-90 framework, and hydrophobic photosensitizer IR780 was loaded into the SAD shell, enabling the combination therapy of photodynamic treatment with chemotherapy. Meanwhile, equipping ZIF-90 with a SAD shell not only substantially improved the pH-responsive drug release of ZIF-90 but also enabled the postformation conjugation of ZIF-90 with hyaluronic acid for specific CD44 recognition, thereby facilitating precise drug delivery to CD44-overexpressed tumor. Such a simple microfluidics-based strategy can efficiently overcome the limitations of solely MOF-based DDSs and greatly extend the flexibility of MOF biomedical applications.

Sn4+ complexation with sulfonated-carbon dots in pursuit of enhanced fluorescence and singlet oxygen quantum yield

Here we report a novel strategy to crosslink the surface of sulfonated-carbon dots (S-CDs) by complexing SnCl₄ with sulfonate groups (-SO₃^-) on the CDs in aqueous solution. The S-CDs show an average photoluminescence (PL) quantum yield of 21% and a mean diameter of 3.8 nm. After being complexed with Sn⁴⁺, the as-obtained Sn@S-CDs present a reduced size of 1.8 nm and a higher PL quantum yield of 32%. More interestingly, the Sn@S-CDs show an enhanced singlet oxygen (¹O₂) quantum yield as high as 37% compared to that of the S-CDs (27%). In the HepG2 cell line as a model, the Sn@S-CDs exhibit a remarkable cell imaging effect and in vitro PDT efficiency. Therefore, our study proposes a simple but effective cross-linking strategy to synthesize CDs incorporated with metal ions, for the purpose of achieving an enhanced fluorescence intensity and a higher ¹O₂ quantum yield.

Two-dimensional nanomaterials: fascinating materials in biomedical field

Due to their high anisotropy and chemical functions, two-dimensional (2D) nanomaterials have attracted increasing interest and attention from various scientific fields, including functional electronics, catalysis, supercapacitors, batteries and energy materials. In the biomedical field, 2D nanomaterials have made significant contributions to the field of nanomedicine, especially in drug/gene delivery systems, multimodal imaging, biosensing, antimicrobial agents and tissue engineering. 2D nanomaterials such as graphene/graphene oxide (GO)/reduced graphene oxide (rGO), silicate clays, layered double hydroxides (LDHs), transition metal dichalcogenides (TMDs), transition metal oxides (TMOs), black phosphorus (BP), graphitic carbon nitride (g-C₃N₄), hexagonal boron nitride (h-BN), antimonene (AM), boron nanosheets (B NSs) and tin telluride nanosheets (SnTe NSs) possess excellent physical, chemical, optical and biological properties due to their uniform shapes, high surface-to-volume ratios and surface charge. In this review, we first introduce the properties, structures and synthetic strategies of different configurations of 2D nanomaterials. Recent advances and paradigms of 2D nanomaterials in a variety of biomedical applications, ranging from drug delivery, cancer treatment, bioimaging and tissue engineering to biosensing are discussed afterwards. In the final part, we foresee the development prospects and challenges of 2D nanomaterials after summarizing the research status of ultrathin 2D nanomaterials.

Tumor Targeting Strategies of Smart Fluorescent Nanoparticles and Their Applications in Cancer Diagnosis and Treatment

Advantages such as strong signal strength, resistance to photobleaching, tunable fluorescence emissions, high sensitivity, and biocompatibility are the driving forces for the application of fluorescent nanoparticles (FNPs) in cancer diagnosis and therapy. In addition, the large surface area and easy modification of FNPs provide a platform for the design of multifunctional nanoparticles (MFNPs) for tumor targeting, diagnosis, and treatment. In order to obtain better targeting and therapeutic effects, it is necessary to understand the properties and targeting mechanisms of FNPs, which are the foundation and play a key role in the targeting design of nanoparticles (NPs). Widely accepted and applied targeting mechanisms such as enhanced permeability and retention (EPR) effect, active targeting, and tumor microenvironment (TME) targeting are summarized here. Additionally, a freshly discovered targeting mechanism is introduced, termed cell membrane permeability targeting (CMPT), which improves the tumor-targeting rate from less than 5% of the EPR effect to more than 50%. A new design strategy is also summarized, which is promising for future clinical targeting NPs/nanomedicines design. The targeting mechanism and design strategy will inspire new insights and thoughts on targeting design and will speed up precision medicine and contribute to cancer therapy and early diagnosis.

Black Phosphorus-Based Multimodal Nanoagent: Showing Targeted Combinatory Therapeutics against Cancer Metastasis

In breast cancer chemophotothermal therapy, it is a great challenge for the development of multifunctional nanoagents for precision targeting and the effective treatment of tumors, especially for metastasis. Herein, we successfully design and synthesize a multifunctional black phosphorus (BP)-based nanoagent, BP/DTX@PLGA, to address this challenge. In this composite nanoagent, BP quantum dots (BPQDs) are loaded into poly(lactic-co-glycolic acid) (PLGA) with additional conjugation of a chemotherapeutic agent, docetaxel (DTX). The in vivo distribution results demonstrate that BP/DTX@PLGA shows striking tropism for targeting both primary tumors and lung metastatic tumors. Moreover, BP/DTX@PLGA exhibits outstanding controllable chemophotothermal combinatory therapeutics, which dramatically improves the efficacy of photothermal tumor ablation when combined with near-light irradiation. Mechanistically, accelerated DTX release from the nanocomplex upon heating and thermal treatment per se synergistically incurs apoptosis-dependent cell death, resulting in the elimination of lung metastasis. Meanwhile, in vitro and in vivo results further confirm that BP/DTX@PLGA possesses good biocompatibility. This study provides a promising BP-based multimodal nanoagent to constrain cancer metastasis.

Cholesterol-Modified Black Phosphorus Nanospheres for the First NIR-II Fluorescence Bioimaging

Black phosphorus (BP) nanostructures with unique layer-dependent properties have been extensively applied in the fields of electronic devices, energy conversion and storage, and nanomedicine. As a narrow band gap semiconductor, they are expected to show strong second near-infrared (NIR-II) fluorescence. However, there is no report on the NIR-II fluorescence of free-standing BP nanostructures, which have great potential in the NIR-II fluorescence bioimaging because of their excellent biocompatibility and biodegradability. Here, for the first time, we report that the BP nanoparticles modified with cholesterol exhibit strong NIR-II fluorescence and can be encapsulated with the PEGylated lipid to form BP@lipid-PEG nanospheres for in vitro and in vivo NIR-II imaging. The resultant BP@lipid-PEG nanospheres exhibit broad emissions from 900 to 1650 nm under excitation by an 808 nm laser and have 8% quantum yield of that of standard dye IR-26. We also show that the NIR-II fluorescence image acquired with emission beyond 1400 nm has the sharpest contrast and can be used to in situ measure the diameter of blood vessels. In addition to NIR-II fluorescence imaging, we also show the potential of BP@lipid-PEG nanospheres in photoacoustic (PA) imaging. Both the long-wavelength NIR-II fluorescence imaging and PA imaging reveal that the as-fabricated BP@lipid-PEG nanospheres can be gradually metabolized by the liver in 48 h, thus making them promising for bioapplications.

Design and Applications of Photoresponsive Hydrogels

Hydrogels are the most relevant biochemical scaffold due to their tunable properties, inherent biocompatibility, and similarity with tissue and cell environments. Over the past decade, hydrogels have developed from static materials to "smart" responsive materials adapting to various stimuli, such as pH, temperature, chemical, electrical, or light. Light stimulation is particularly interesting for many applications because of the capability of contact-free remote manipulation of biomaterial properties and inherent spatial and temporal control. Moreover, light can be finely adjusted in its intrinsic properties, such as wavelength and intensity (i.e., the energy of an individual photon as well as the number of photons over time). Water is almost transparent for light in the photochemically relevant range (NIR-UV), thus hydrogels are well-suited scaffolds for light-responsive functionality. Hydrogels' chemical and physical variety combined with light responsiveness makes photoresponsive hydrogels ideal candidates for applications in several fields, ranging from biomaterials, medicine to soft robotics. Herein, the progress and new developments in the field of light-responsive hydrogels are elaborated by first introducing the relevant photochemistries before discussing selected applications in detail.

Radial extracorporeal shock wave promotes the enhanced permeability and retention effect to reinforce cancer nanothermotherapeutics

Since most cancer nanomedicine relies on the enhanced permeability and retention (EPR) effect to eradicate tumors, strategies that are able to promote nanoparticle (NP) delivery and extravasation are presupposed to elevate the EPR effect for more effective cancer therapeutics. However, nanothermotherapeutics still suffers from limited drug delivery into tumor sites, for even though numerous efforts have been made to enhance the selective tumor targeting of NPs. In this study, we uncovered that radial extracorporeal shock wave therapy (rESWT), an important approach in physical therapy that has been overlooked in cancer treatment in the past, can largely improve the EPR-dependent tumor uptake of NPs. We here defined the optimal low dosage and desirable combinatory manner for rESWT in driving NP accumulation towards tumors. Two underlying biophysical mechanisms responsible for the rESWT-enhanced EPR effect were proposed. On one hand, rESWT-conducted compressive and tensile forces could relieve high intra-tumoral pressure; on the other hand, rESWT-induced cavitation bubbles could directly distend and disrupt tumor blood vessels. All these together synergistically promoted vessel vasodilation, tumor perfusion and NP extravasation. Further experiments revealed that the combinatory therapeutics between rESWT and nanothermotherapeutics greatly improved the tumor-killing efficacy. Thus, our findings open a new path to improve EPR-mediated drug delivery with the assistance of rESWT.

Boosting the Radiosensitizing and Photothermal Performance of Cu2- xSe Nanocrystals for Synergetic Radiophotothermal Therapy of Orthotopic Breast Cancer

The small difference between tumor and normal tissues in their responses to ionizing radiation has been a significant issue for radiotherapy of tumors. Herein, we report that dumbbell-shaped heterogeneous copper selenide-gold nanocrystals can serve as an efficient radiosensitizer for enhanced radiotherapy. The mean lethal dose of X-rays to 4T1 tumor cells can be drastically decreased about 40%, that is, decreasing from 1.81 to 1.10 Gy after culture with heterostructures. Due to the synergetic effect of heterostructures, the dose of X-rays is also much lower than those obtained from mixture of Cu_{2- x}Se + Au nanoparticles (1.78 Gy), Cu_{2- x}Se nanoparticles (1.72 Gy) and Au nanoparticles (1.50 Gy), respectively. We demonstrate that the sensitivity enhancement ratio of Cu_{2- x}Se nanoparticles was significantly improved 45% ( i. e., from 1.1 to 1.6) after the formation of heterostructures with gold. We also show that the heteronanocrystals exhibit an enhanced photothermal conversion efficiency, due to the synergetic interactions of localized surface plasmon resonance. These properties highly feature them as a multimodal imaging contrast agent (particularly for photoacoustic imaging, computed tomography imaging, and single photon emission computed tomography after labeled with radioisotopes) and as a radiosensitizer for imaging guided synergetic radiophotothermal treatment of cancer. The research provides insights for engineering low- Z nanomaterials with high- Z elements to form heteronanostructures with enhanced synergetic performance for tumor theranostics.

Black phosphorus–polypyrrole nanocomposites for high-performance photothermal cancer therapy

Black phosphorus–polypyrrole nanosheets with superimposed NIR absorption have been fabricated as the novel nanotherapeutic agent for enhanced NIR photothermal cancer therapy in vitro and in vivo.