Synergetic enhancement of surface reactions and charge separation over holey C3N4/TiO2 2D heterojunctions

Creation of Interfacial S4-Sn-N2 Electron Pathways for Efficient Light-Driven Hydrogen Evolution

Establishing effective charge transfer channels between two semiconductors is key to improving photocatalytic activity. However, controlling hetero-structures in situ and designing binding modes pose significant challenges. Herein, hydrolytic SnCl2·2H2O is selected as the metal source and loaded in situ onto a layered carbon nitriden supramolecular precursor. A composite photocatalyst, S4-Sn-N2, with electron pathways of SnS2 and tubular carbon nitriden (TCN) is prepared through pyrolysis and vulcanization processes. The contact interface of SnS2-TCN is increased significantly, promoting the formation of S4-Sn-N2 micro-structure in a Z-scheme charge transfer channel. This structure accelerates the separation and transport of photogenerated carriers, maintains the stronger redox ability, and improves the stability of SnS2 in this series of heterojunctions. Therefore, the catalyst demonstrated exceptional photocatalytic hydrogen production efficiency, achieving a reaction rate of 86.4 µmol h-1, which is 3.15 times greater than that of bare TCN.

Delocalizing Excitation for Highly-Active Organic Photovoltaic Catalysts

Localized excitation in traditional organic photocatalysts typically prevents the generation and extraction of photo-induced free charge carriers, limiting their activity enhancement under illumination. Here, we enhance delocalized photoexcitation of small molecular photovoltaic catalysts by weakening their electron-phonon coupling via rational fluoro-substitution. The optimized 2FBP-4F catalyst we develop here exhibits a minimized Huang-Rhys factor of 0.35 in solution, high dielectric constant and strong crystallization in the solid state. As a result, the energy barrier for exciton dissociation is decreased, and more importantly, polarons are unusually observed in 2FBP-4F nanoparticles (NPs). With the increased hole transfer efficiency and prolonged charge carrier lifetime highly related to enhanced exciton delocalization, the PM6 : 2FBP-4F heterojunction NPs at varied concentration exhibit much higher optimized photocatalytic activity (207.6-561.8 mmol h-1 g-1) for hydrogen evolution than the control PM6 : BP-4F and PM6 : 2FBP-6F NPs, as well as other reported photocatalysts under simulated solar light (AM 1.5G, 100 mW cm-2).

Element-dependent effects of alkali cations on nitrate reduction to ammonia

Catalytic conversion of nitrate (NO3-) pollutants into ammonia (NH3) offers a sustainable and promising route for both wastewater treatment and NH3 synthesis. Alkali cations are prevalent in nitrate solutions, but their roles beyond charge balance in catalytic NO3- conversion have been generally ignored. Herein, we report the promotion effect of K+ cations in KNO3 solution for NO3- reduction over a TiO2-supported Ni single-atom catalyst (Ni1/TiO2). For photocatalytic NO3- reduction reaction, Ni1/TiO2 exhibited a 1.9-fold NH3 yield rate with nearly 100% selectivity in KNO3 solution relative to that in NaNO3 solution. Mechanistic studies reveal that the K+ cations from KNO3 gradually bonded with the surface of Ni1/TiO2, in situ forming a K-O-Ni moiety during reaction, whereas the Na+ ions were unable to interact with the catalyst in NaNO3 solution. The charge accumulation on the Ni sites induced by the incorporation of K atom promoted the adsorption and activation of NO3-. Furthermore, the K-O-Ni moiety facilitated the multiple proton-electron coupling of NO3- into NH3 by stabilizing the intermediates.

Carbon Dots Anchoring Single-Atom Pt on C3N4 Boosting Photocatalytic Hydrogen Evolution

Carbon nitride (C3N4) has gained considerable attention and has been regarded as an ideal candidate for photocatalytic hydrogen evolution. However, its photocatalytic efficiency is still unsatisfactory due to the rapid recombination rate of photo-generated carriers and restricted surface area with few active sites. Herein, we successfully synthesized a single-atom Pt cocatalyst-loaded photocatalyst by utilizing the anchoring effect of carbon dots (CDs) on C3N4. The introduction of CDs onto the porous C3N4 matrix can greatly enhance the specific surface area of C3N4 to provide more surface-active sites, increase light absorption capabilities, as well as improve the charge separation efficiency. Notably, the functional groups of CDs can efficiently anchor the single-atom Pt, thus improving the atomic utilization efficiency of Pt cocatalysts. A strong interaction is formed via the connection of Pt-N bonds, which enhances the efficiency of photogenerated electron separation. This unique structure remarkably improves its H2 evolution performance under visible light irradiation with a rate of 15.09 mmol h-1 g-1. This work provides a new approach to constructing efficient photocatalysts by using CDs for sustainable hydrogen generation, offering a practical approach to utilizing solar energy for clean fuel production.

Artificial Surface Electron Network Prompted Energy Band Structure Tuning: Boosting Solar-to-Hydrogen Evolution Performance

The energy gap and conduction band position of catalysts play crucial roles in solar-to-hydrogen (STH) transformation technology. Unfortunately, although an increase in the conduction band position can effectively promote the photoreduction capacity of the photocatalyst, it will inevitably widen the band gap, thus reducing the light-absorption scale. It seems that there is a contradiction between the reduction of band gap and the improvement of conduction band position, which is that "You can't have your cake and eat it too." Herein, an ultrasimple molecular adsorption strategy was engineered by adsorbing hydrazine hydrate on the surface of TiO2. The theoretical and experimental results indicated that the strong electron-donating effect of amino groups in hydrazine hydrate can promote the redistribution of photogenerated electrons and form surface electron networks on the surface of TiO2 photocatalysts, which can bend the conduction band upward and significantly improve its photoreduction ability. Besides, the adsorption of -NH2 can narrow the band gap width of TiO2 and promote the separation efficiency of photogenerated carriers. More interestingly, it can also effectively enhance the adsorption of H2O and H+, thus greatly elevating the STH efficiency. The STH rate of the as-prepared T-N-3 can be increased by ≈530%. This work sheds light on a new approach for resolving the contradiction between photoreduction and light absorption capabilities to effectively enhance photocatalytic performance.

Porphyrin Supramolecular Nanoassembly/C3N4 Nanosheet S-Scheme Heterojunctions for Selective Photocatalytic CO2 Reduction toward CO

The photocatalytic reduction of CO2 with H2O into valuable chemicals is a sustainable carbon-neutral technology for renewable energy; however, the photocatalytic activity and product selectivity remain challenging. Herein, an S-scheme heterojunction photocatalyst with superior CO2 photoreduction performance─porous C3N4 (CN) nanosheets anchored with zinc(II) tetra(4-cyanophenyl)porphyrin (ZnTP) nanoassemblies (denoted as ZnTP/CN)─was designed and prepared via a simple self-assembly process. The constructed ZnTP/CN heterojunction had rich accessible active sites, improved CO2 absorption capacity, and high charge carrier separation efficiency caused by the S-scheme heterojunction. As a result, the obtained ZnTP/CN catalyst exhibited considerable activity for photocatalytic CO2 reduction, yielding CO with a generation rate of 19.4 μmol g-1·h-1 and a high selectivity of 95.8%, which is much higher than that of pristine CN nanosheets (4.53 μmol g-1·h-1, 57.4%). In addition, theoretical calculations and in situ Fourier transform infrared spectra demonstrated that the Zn sites in the porphyrin unit favor CO2 activation and *COOH formation as well as CO desorption, thereby affording a high CO selectivity. This work provides insight into the design and fabrication of efficient S-scheme heterostructure photocatalysts for solar energy storage.

Ternary Heterojunction Graphitic Carbon Nitride/Cupric Sulfide/Titanium Dioxide Photoelectrochemical Sensor for Sesamol Quantification and Antioxidant Synergism

Sesamol (SM) is a potent natural antioxidant that can quench free radicals and modulate the cholinergic system in the brain, thereby ameliorating memory and cognitive impairment in Alzheimer's disease patients. Moreover, the total antioxidant capacity can be amplified by synergistic interactions between different antioxidants. Here, we constructed a ternary heterojunction graphitic carbon nitride/cupric sulfide/titanium dioxide (g-C3N4/CuS/TiO2) photoelectrochemical (PEC) sensor for the quantification of SM and its synergistic interactions with other antioxidants. Crucially, the Schottky barrier in ternary semiconductors considerably enhances electron transfer. The PEC sensor showed a wide linear range for SM detection, ranging from 2 to 1277 μmol L-1, and had a limit of detection of 1.8 μmol L-1. Remarkably, this sensing platform could evaluate the synergism between SM and five typical lipid-soluble antioxidants: tert-butyl hydroquinone, vitamin E, butyl hydroxyanisole, propyl gallate, and butylated hydroxytoluene. Owing to its low redox potential, SM could reduce antioxidant radicals and promote their regeneration, which increased the overall antioxidant performance. The g-C3N4/CuS/TiO2 PEC sensor exhibited high sensitivity, satisfactory selectivity, and stability, and was successfully applied for SM determination in both soybean and peanut oils. The findings of this study provide guidance for the development of nutritional foods, nutrition analysis, and the treatment of diseases caused by free radicals.

Light-Activated Interface Charge-Alternating Interaction on an Extended Gate Photoelectrode: A New Sensing Strategy for EGFET-Based Photoelectrochemical Sensors

Integration of extended gate field-effect transistors (EGFET) and photoelectrochemical (PEC) measurement to construct highly sensitive sensors is an innovative research field that was proven feasible by our previous work. However, it remains a challenge on how to adjust the interaction between the extended gate and the analyte and study its influence on EGFET-based PEC sensors. Herein, a new sensing strategy was proposed by a mutual electrostatic interaction. Three-dimensional TiO₂ and g-C₃N₄ core-shell heterojunction on flexible carbon cloth (TCN) was designed as the extended sensing gate. Tetracycline (TC) was also used as a model analyte, and it contains electron-donating groups (-NH₂ and -OH) with negative charge. The designed TCN-extended sensing gate was negatively charged in the dark by introducing carbon vacancies with oxygen doping in the g-C₃N₄ shell, while it was positively charged under illustration due to the aggregation of photogenerated holes on the surface. Therefore, a light-activated PEC sensing platform for the sensitive and selective determination of tetracycline (TC) was demonstrated. Such a PEC sensor exhibited wide linear ranges within 100 pM to 1 μM and 1-100 μM with a low detection limit of 0.42 pM. Furthermore, the sensing platform possessed excellent selectivity, good reproducibility, and stability. The proposed sensing strategy in this work can expand the paradigm for developing a light-regulated FET-based PEC sensor by mutual electrostatic interaction, and we believe that this work will offer a new perspective for the design of interface interaction in PEC devices.

TiO2/graphitic carbon nitride nanosheet composite with enhanced sensitivity to atmospheric water

Understanding the fundamentals of transport properties in two-dimensional (2D) materials is essential for their applications in devices, sensors, and so on. Herein, we report the impedance spectroscopic study of carbon nitride nanosheets (CNNS) and the composite with anatase (TiO₂/CNNS, 20 atom% Ti), including their interaction with atmospheric water. The samples were characterized by X-ray diffraction, N₂ adsorption/desorption, solid state ¹H nuclear magnetic resonance spectroscopy, thermogravimetric analysis, and transmission electron microscopy. It is found that CNNS is highly insulating (resistivity ρ ∼ 10¹⁰ Ω cm) and its impedance barely changes during a 20 min-measurement at room temperature and 70% relative humidity. Meanwhile, incorporating the semiconducting TiO₂ nanoparticles (∼10 nm) reduces ρ by one order of magnitude, and the decreased ρ is proportional to the exposure time to atmospheric water. Sorbed water shows up at low frequency (<10² Hz) with relaxation time in milliseconds, but the response intrinsic to CNNS and TiO₂/CNNS is evident at higher frequency (>10⁴ Hz) with relaxation time in microseconds. These two signals apparently correlate to the endothermic peak at ≤110 °C and >250 °C, respectively, in differential scanning calorimetry experiments. Universal power law analysis suggests charge hopping across the 3D conduction pathways, consistent with the capacitance in picofarad typical of grain response. Our work demonstrates that the use of various formalisms (i.e., impedance, permittivity, conductivity, and modulus) combined with a simple universal power law analysis provides insights into water-induced transport of the TiO₂/CNNS composite without complicated curve fitting procedure or dedicated humidity control.

Engineering interface structures for heterojunction photocatalysts

Solar photocatalysis is the most ideal solution to global energy concerns and environmental deterioration nowadays. The heterojunction combination has become one of the most successful and effective strategies to design and manufacture composite photocatalysts. Heterojunction structures are widely documented to markedly improve the photocatalytic behavior of materials by enhancing the separation and transfer of photogenerated charges, widening the light absorption range, and broadening redox potentials, which are attributed to the presence of both build-in electric fields at the interface of two different materials and the complementarity between different electron structures. So far, a large number of heterojunction photocatalytic materials have been reported and applied for water splitting, reduction of carbon dioxide and nitrogen, environmental cleaning, etc. This review outlines the recent accomplishments in the design and modification of interface structures in heterojunction photocatalysts, aiming to provide some useful perspectives for future research in this field.

Partial Sulphidation to Regulate Coordination Structure of Single Nickel Atoms on Graphitic Carbon Nitride for Efficient Solar H2 Evolution

To develop a non-precious highly efficient cocatalyst to replace Pt on graphitic carbon nitride (g-C₃ N₄ ) for solar H₂ production is great significant, but still remains a huge challenge. The emerging single-atom catalyst presents a promising strategy for developing highly efficient non-precious cocatalyst owing to its unique adjustability of local coordination environment and electronic structure. Herein, this work presents a facile approach to achieve single Ni sites (Ni₁ -N₂ S) with unique local coordination structure featuring one Ni atom coordinated with two nitrogen atoms and one sulfur atom, confirmed by high-angle annular dark-field scanning transmission electron microscopy, X-ray absorption spectroscopy, and density functional theory calculation. Thanks to the unique electron structure of Ni₁ -N₂ S sites, the 1095 µmol g^-1 h^-1 of high H₂ evolution rate with 4.1% of apparent quantum yield at 420 nm are achieved. This work paves a pathway for designing a highly efficient non-precious transition metal cocatalyst for photocatalytic H₂ evolution.

Direct Z-Scheme g-C3N5/Cu3TiO4 Heterojunction Enhanced Photocatalytic Performance of Chromene-3-Carbonitriles Synthesis under Visible Light Irradiation

In order to make the synthesis of pharmaceutically active carbonitriles efficient, environmentally friendly, and sustainable, the method is regularly examined. Here, we introduce a brand-new, very effective Cu3TiO4/g-C3N5 photocatalyst for the production of compounds containing chromene-3-carbonitriles. The direct Z-Scheme photo-generated charge transfer mechanism used by the Cu3TiO4/g-C3N5 photocatalyst results in a suppressed rate of electron-hole pair recombination and an increase in photocatalytic activity. Experiments showed that the current method has some advantages, such as using an environmentally friendly and sustainable photocatalyst, having a simple procedure, quick reaction times, a good product yield (82–94%), and being able to reuse the photocatalyst multiple times in a row without noticeably decreasing its photocatalytic performance.

Facile Chemical Vapor Modification Strategy to Construct Surface Cyano-Rich Polymer Carbon Nitrides for Highly Efficient Photocatalytic H2 Evolution

The surface grafting of electro-negative cyano groups on polymer carbon nitrides (PCNs) is an effective way to tail their electronic structure. Despite the significant progress in the synthesis of cyano group-enriched PCN, developing a simple and efficient method remains challenging. Here, a facile strategy was developed for fabricating surface cyano-rich PCN (PCN-DM) with a porous structure via chemical vapor modification using diaminomaleonitrile. The cyano groups of diaminomaleonitrile substituted the amino groups on PCN surface via a deamination. The hydrogen production rate of the PCN-DM was approximately 17 times higher than that of pristine PCN. This significant increase in photocatalytic performance could be assigned to the fusion of cyano groups in the surface of PCN, forming new gap states that broadened the visible-light harvesting and accelerated charge separation for photoredox reactions. This study unveils a promising approach for incorporating functional units in the design of novel photocatalysts for efficient hydrogen production.

A Unique Fe-N4 Coordination System Enabling Transformation of Oxygen into Superoxide for Photocatalytic CH Activation with High Efficiency and Selectivity

Selective oxidation of CH bonds is one of the most important reactions in organic synthesis. However, activation of the α-CH bond of ethylbenzene by use of photocatalysis-generated superoxide anions (O₂ ^•- ) remains a challenge. Herein, the formation of individual Fe atoms on polymeric carbon nitride (CN), that activates O₂  to create O₂ ^•- for facilitating the reaction of ethylbenzene to form acetophenone, is demonstrated. By utilizing density functional theory and materials characterization techniques, it is shown that individual Fe atoms are coordinated to four N atoms of CN and the resultant low-spin Fe-N₄  system (t_2g ⁶ e_g ⁰ ) is not only a great adsorption site for oxygen molecules, but also allows for fast transfer of electrons generated in the CN framework to adsorbed O₂ , producing O₂ ^•- . The oxidation reaction of ethylbenzene triggered by O₂ ^•- ions turns out to have a high conversion rate of 99% as well as an acetophenone selectivity of 99%, which can be ascribed to a novel reaction pathway that is different from the conventional route involving hydroxyl radicals and the production of phenethyl alcohol. Furthermore, it possesses great potential for other CH activation reactions besides ethylbenzene oxidation.

Visible Light-Driven Selective Reduction of CO2 by Acetylene-Bridged Cobalt Porphyrin Conjugated Polymers

Photocatalytic conversion of CO₂ into renewable fuels with high efficiency and selectivity is desirable for solar energy utilization, but remains a great challenge. Herein, cobalt(II)-porphyrin functionalized conjugated polymers with acetylene bridging units, assembled through the Sonogashira cross coupling reaction, as heterogeneous catalysts for CO₂ photoreduction were presented. Experimental investigations and density functional theory calculations demonstrated the crucial roles of Co centers in porphyrin units for CO₂ activation and conversion, while excessive acetylene group prompted the competing hydrogen evolution reaction and reduced the selectivity. Thus, the CoPor-DBBP afforded superior activity for the CO generation with a rate of 286.7 μmol g^-1  h^-1 and high selectivity of up to 90.4 %. This work presents a new insight for rationally designing of porphyrin-based conjugated polymers as energetic photocatalyst in CO₂ reduction.

Recent advances in visible-light graphitic carbon nitride (g-C3N4) photocatalysts for chemical transformations

Graphitic carbon nitride (g-C3N4) has emerged as a new research hotspot, attracting broad interdisciplinary attention in the form of metal-free and visible-light-responsive photocatalysts in the field of solar energy conversion and environmental remediation. These photocatalysts have evolved as attractive candidates due to their non-toxicity, chemical stability, efficient light absorption capacity in the visible and near-infrared regions, and adaptability as a platform for the fabrication of hybrid materials. This review mainly describes the latest advances in g-C3N4 photocatalysts for chemical transformations. In addition, the typical applications of g-C3N4-based photocatalysts involving organic transformation reactions are discussed (synthesis of heterocycles, hydrosulfonylation, hydration, oxygenation, arylation, coupling reactions, etc.).

Monochromatic light-enhanced photocatalytic CO2 reduction based on exciton properties of two-dimensional lead halide perovskites

Converting CO₂ into valuable solar fuels through photocatalysis has been considered a green and sustainable technology that is promising for alleviating global warming and providing energy in an environmentally friendly manner. However, traditional photocatalysts generally suffer from low surface-reactive reaction sites, inefficient light harvesting and rapid recombination of electron-hole pairs. Lead halide perovskite materials have been considered ideal semiconductor photocatalysts for photocatalytic CO₂ reduction due to their tunable band gaps, strong light absorption, and low cost. Herein, a series of L₂Cs_n-1Pb_nX_3n+1 (L = ba, ha, oa; X = Cl, Br, I; n = 1, 2) 2D layered perovskites were synthesized by a facile solvothermal method. The effects of alkyl amine chain length, halogen atoms and inorganic layer number on their properties were studied. More importantly, these 2D materials were used as photocatalysts for CO₂ reduction without any sacrificial agents. These 2D perovskites exhibited markedly increased performance in comparison with 3D bulk materials, benefitting from the larger surface-area-to-volume ratio and faster and more efficient exciton dissociation, which achieved the highest CO yield of 158.69 μmol g^-1 h^-1 and CH₄ yield of 6.9 μmol g^-1 h^-1 through the design of the photocatalytic system. In addition, the influence of light source conditions on photocatalysis was studied systematically, including light source intensity and wavelength. The experimental results indicated that an appropriate solvent, high light intensity and monochromatic light source matching the wavelength of exciton absorption can effectively improve the photocatalytic efficiency.

Semicrystalline SrTiO3 -Decorated Anatase TiO2 Nanopie as Heterostructure for Efficient Photocatalytic Hydrogen Evolution

The coupling of TiO₂ and SrTiO₃ through elaborate bandgap engineering can provide synergies for highly efficient photocatalysts. To further improve the separation between photogenerated electrons and holes, a nano-heterostructured combination of semicrystalline SrTiO₃ (S-SrTiO₃ ) and anatase TiO₂ nanoparticles is designed, and an optimized interface is achieved between uniformly grown S-SrTiO₃ and metal organic framework (MOF)-derived anatase TiO₂ through a controlled hydrothermal process. Besides tuning of the bandgap and broadening of the absorption spectral range, S-SrTiO₃ particles alleviate charge carrier recombination benefiting from the coupling of the semicrystalline SrTiO₃ around the interface. Additionally, highly dispersed S-SrTiO₃ on TiO₂ provides a good spatial distribution of active sites and the abundant carbon remained from MOF may reduce charge transport resistance. Moreover, the rapid transfer within the nano-heterostructure promotes the separation of the photogenerated charge carriers. With the above predominant architecture, when used as a photocatalyst, the as-synthesized S-SrTiO₃ /TiO₂ heterostructure exhibits exceptionally high photocatalytic performance of 13 005 µmol h^-1 g^-1 for H₂ production, exceeding most oxide-based photocatalysts reported. This study might provide mechanistic insights into a new perspective for the design and preparation of photocatalysts with novel structure and enhanced catalysis activity.

A strategy to construct a highly active CoxP/SrTiO3(Al) catalyst to boost the photocatalytic overall water splitting reactions

Hydrogen production from overall water splitting using SrTiO₃(Al)-based semiconductors is one of the most promising routes to address energy and environmental concerns. Noble metals are needed to accelerate water splitting by promoting the charge transfer and providing active sites. However, noble metal-based catalysts have high prices and rare resources. Herein, we demonstrate a strategy to construct highly active Co_xP/SrTiO₃(Al) for overall water splitting. Hydrothermal method followed by an ultrasonic process was applied to prepare Co_xP dots, which were loaded on the whole surface of SrTiO₃(Al) as bifunctional cocatalysts. Interestingly, the Co_xP dots on the (110) planes of SrTiO₃(Al) were partially oxidized for the OER reaction. However, Co_xP dots on the (100) planes of SrTiO₃(Al) for HER kept it as it was. The as-prepared Co_xP/SrTiO₃(Al) photocatalyst shows a stable HER rate of 1.36 mmol^-1 h^-1 and OER rate of 0.635 mmol^-1 h^-1. The strong interaction between Co_xP and SrTiO₃(Al) not only facilitates rapid charge separation but also provides a highly active site for overall water splitting. Our study provides a valuable method for constructing noble-metal-free SrTiO₃(Al)-based photocatalysts.

Porous Nitrogen-Defected Carbon Nitride Derived from A Precursor Pretreatment Strategy for Efficient Photocatalytic Degradation and Hydrogen Evolution

Graphitic carbon nitride (g-C₃N₄) has attracted extensive research attention because of its virtues of a metal-free nature, feasible synthesis, and excellent properties. However, the low specific surface area and mediocre charge separation dramatically limit the practical applications of g-C₃N₄. Herein, porous nitrogen defective g-C₃N₄ (PDCN) was successfully fabricated by the integration of urea-assisted supramolecular assembly with the polymerization process. Advanced characterization results suggested that PDCN exhibited a much larger specific surface area and dramatically improved charge separation compared to bulk g-C₃N₄, leading to the formation of more active sites and the improvement in mass transfer. The synthesized PDCN rendered a 16-fold increase in photocatalytic tetracycline degradation efficiency compared to g-C₃N₄. Additionally, the hydrogen evolution rate of PDCN was 10.2 times higher than that of g-C₃N₄. Meanwhile, the quenching experiments and electron spin resonance (ESR) spectra suggested that the superoxide radicals and holes are the predominant reactive species for the photocatalytic degradation process. This study may inspire the new construction design of efficient g-C₃N₄-based visible-light photocatalysts.

Fabrication of novel direct Z-scheme + isotype heterojunction photocatalyst g-C3N4/TiO2 with peroxymonosulfate (PMS) activation synergy and 2D/0D structure

A novel strategy for fabricating C3N4/TiO2 Z-scheme heterojunctions based on C3N4 isotype heterojunctions is presented. This scheme exploits the structural plasticity of C3N4 to achieve a breakthrough in activity without adding new materials.

Self-assembled Transition Metal Chalcogenides@CoAl-LDH 2D/2D Heterostructures with Enhanced Photoactivity for Hydrogen Evolution

Transition metal chalcogenides (TMCs) have been well-established as ideal low-dimensional systems for photocatalytic hydrogen evolution. Strategies toward improving the activity of these TMCs photocatalysts by crafting heterostructures have been intensively...

New carbon nitride close to C6N7 with superior visible light absorption for highly efficient photocatalysis

The rational design and construction of novel two-dimensional (2D) carbon nitrides (CNs) beyond g-C₃N₄ is a hot topic in the fields of chemistry and materials. Inspired by the polymerisation of urea, we have prepared a series of novel C-C bridged heptazine CNs UO_x (where x is the ratio of urea to oxamide, x = 1, 1.5, 2, 2.5, and 3), which are similar to (C₆N₇)_n, upon the introduction of oxamide. As predicted using density functional theory (DFT) calculations, the conjugated structure of UO_x was effectively extended from an individual heptazine to the entire material. Consequently, its bandgap was reduced to 2.05 eV, and its absorption band edge was significantly extended to 600 nm. Furthermore, its carrier transfer and separation were significantly enhanced, establishing its superior photocatalytic activity. The optimised UO₂ exhibits a superior photocatalytic hydrogen production rate about 108.59 μmol h^-1 (using 10 mg of catalyst) with an apparent quantum efficiency (AQE) of 36.12% and 0.33% at 420 and 600 nm, respectively, which is one of the most active novel CNs reported to date. Moreover, UO₂ exhibits excellent photocatalytic activity toward the oxidation of diphenylhydrazine to azobenzene with conversion and selectivity reaching ~100%, which represents a promising highly efficient 2D CN material. Regarding phenols degradation, UO₂ also displayed significantly higher activity and durability during the degradation of phenol when compared to traditional g-C₃N₄, highlighting its significant potential for application in energy, environment and photocatalytic organic reactions.

Fabrication of g-C3N4/Y-TiO2 Z-scheme heterojunction photocatalysts for enhanced photocatalytic activity

The g-C3N4/Y-TiO2 Z-scheme heterojunction photocatalysts for enhanced photocatalytic activity that use yttrium instead of noble metals was successfully manufactured.