Pre-treatment and bioconversion of wastewater sludge to value-added products--fate of endocrine disrupting compounds

Recovery of 17β-Estradiol Using 3D Printed Polyamide-12 Scavengers

Over the past decades, endocrine-disrupting compounds have been under active studies due to their potential environmental impact and increased usage. The actual hormones, especially estrogens, have shown to be one of the major contributors to hormonal waste in wastewater. Wastewater treatment facilities have variable capabilities to handle hormonal compounds and, therefore, different quantities of harmful compounds may end up in the environment. We introduce a simple technique to remove estrogens, such as 17β-estradiol (E2) from wastewater by using 3D printed polyamide-12 (PA12) filters. A selective laser sintering 3D printing was used to manufacture porous PA12 filters with accessible functional groups. Adsorption and desorption properties were studied using gas chromatography with flame ionization detector. The results showed that near quantitative removal of E2 was achieved. The 3D printed filters could also be regenerated and reused without losing their efficiency. During regeneration, E2 could be extracted from the filter without destroying the compound. This opens up possibilities to use the hormone scavenger filters also as concentration tools enabling accurate analyses of sources with trace concentrations of E2.

Laccase-Driven Transformation of High Priority Pesticides Without Redox Mediators: Towards Bioremediation of Contaminated Wastewaters

In this study, Pleurotus dryinus was grown on municipal biosolids (BS) as the substrate to produce laccase for the removal of pesticides (fungicides, herbicides, and insecticides) from wastewater. Among the various types of BS tested, sterilized biosolids were the most promising substrate for laccase production by P. dryinus with a maximal laccase activity (162.1 ± 21.1 U/g dry substrate), followed by hygenized biosolids (96.7 ± 17.6 U/g dry substrate), unsterilized biosolids (UBS) (31.9 ± 1.2 U/g dry substrate), and alkali-treated biosolids (8.2 ± 0.4 U/g dry substrate). The ultrasound-assisted extraction of this enzyme from fermented UBS was carried out with 0.1 M phosphate buffer at pH 7.0, which increased the enzyme activity of the crude extract by 30%. To test the catalytic potential of the biocatalyst in real matrices, 1 U/ml of recovered crude laccase extract was applied for 24 h for the removal of 29 pesticides (nine fungicides, 10 herbicides, and 10 insecticides) either separately or as a mixture from spiked biologically treated wastewater effluent. When treated with crude enzyme extract, high-priority herbicides metolachlor and atrazine were completely removed, while 93%–97% of the insecticides aldicarb, spinosad, and azinphos-methyl and up to 91% of kresoxim-methyl were removed. Promising results were obtained with BS-derived crude enzyme extract exhibiting improved pesticides removal, which may be due to the mediator effect resulting from the catalytic transformation of other molecules in the cocktail. The results demonstrated a promising integrated bioprocess for the removal of pesticides in wastewater using crude laccase obtained from BS.

Occurrence, fate, and persistence of emerging micropollutants in sewage sludge treatment

Sludge generated at sewage treatment plants is of environmental concern due to the voluminous production and the presence of a high concentration of emerging contaminants (ECs). This review discusses the fate of ECs in sewage sludge treatment with an emphasis on fundamental mechanisms driving the degradation of compounds based on chemical properties of the contaminant and process operating conditions. The removal of ECs in sewage sludge through various treatment processes of sludge stabilization, such as anaerobic digestion (AD), composting, and pre-treatment methods (thermal, sonication, and oxidation) followed by AD, are discussed. Several transformation mechanisms and remediation strategies for the removal of ECs in sludge are summarized. The study concludes that pH, sludge type, and the types of functional groups are the key factors affecting the sorption of ECs to sludge. During conventional waste stabilization processes such as composting, the degradation of ECs depends on the type of feedstock (TOC, N, P, C/N, C/P) and the initial concentration of the contaminant. In AD, the degree of degradation depends on the hydrophilicity of the compound. The estrogenicity of the sludge may sometimes increase due to the conversion to estrogenic compounds. The pre-treatment techniques can increase the partitioning of ECs in the soluble fraction resulting in enhanced biodegradation up to 10-60%. However, the formation of by-products and loss of OH· to scavenging under high organic content during advanced oxidation processes can make the process uneconomical and require further research.

Biopesticide and formulation processes based on starch industrial wastewater fortified with soybean medium

The aim of this study was to produce Bacillus thuringiensis-based biopesticide using starch-producing industry wastewater (SIW) fortified with soybean medium and optimize the formulated product using different adjuvants. This study was necessary as low endotoxin concentration is obtained in formulated biopesticide when SIW alone is used as fermentation medium. The fermentation runs were conducted using SIW alone and SIW fortified with 25% soybean (w/v) medium in 2000 L and 150 L bioreactor, respectively. SIW supplemented with soybean medium showed an increase in cell count (from 1.95 × 108 to 1.65 × 109 CFU mL-1), spore synthesis (from 1.5 × 108 to 1.35 × 109 CFU mL-1) and endotoxin concentration (from 436 to 1170 μg mL-1) when compared to SIW medium alone. The fermented broth was concentrated using continuous centrifugation and adjuvants were added for biopesticide formulation in order to enhance its resistance against UV rays and rainfastness. Entomotoxicity of the formulation produced using fermented broth of SIW fortified with soybean (38,000 IU μL-1) was higher than that obtained by SIW medium alone (21,000 IU μL-1), commercial biopesticide Foray 76B (20,000 IU μL-1) and Btk sander's (12,500 IU μL-1).

The Presence of 17 Beta-Estradiol in the Environment: Health Effects and Increasing Environmental Concerns

Endocrine-disrupting compounds (EDCs) as active biological compounds can pose a threat to the environment through acute and chronic toxicity in organisms, accumulation in the ecosystem, and loss of habitats and biodiversity. They also have a range of possible adverse effects on environmental and ecological health. Estradiol, as one of the natural estrogenic hormones released by the humans and livestock, may exert endocrine-disrupting effects on the nanogram-per-liter range and cause serious problems for the aquatic organisms and animals in many aquatic systems. Various studies have reported the presence of synthetic estrogens such as 17 alpha-ethinyl estradiol (EE2) and natural estrogens including 17 beta-estradiol (E2) in wastewater sludge, surface water, river bed sediment, and also digested and activated sludge. The aim of the present study was to review and evaluate the endocrine disrupting compounds especially 17 beta-estradiol, as a representative of estrogen hormones present in the environment and their disturbing effects on humans and wildlife.

Enhanced laccase-mediated transformation of diclofenac and flufenamic acid in the presence of bisphenol A and testing of an enzymatic membrane reactor

The inadequate removal of pharmaceuticals and other micropollutants in municipal wastewater treatment plants, as evidenced by their detection of these substances in the aquatic environment has led to the need for sustainable remediation strategies. Laccases possess a number of advantages including a broad substrate spectrum. To identify promoting or inhibitory effects of reaction partners in the remediation processes we tested not only single compounds—as has been described in most studies—but also mixtures of pollutants. The reaction of diclofenac (DCF) and flufenamic acid (FA), mediated by Trametes versicolor laccase resulted in the formation of products, which were more hydrophilic than the respective reactant (reactant concentration of 0.1 mM; laccase activity 0.5 U/ml). Analyses (HPLC, LC/MS) showed that the product 1a and 1b for DCF and FA, respectively, to be a para-benzoquinone imine derivative. The formation of 1a was enhanced by the addition of bisphenol A (BPA). After 6 days 97% more product was formed in the mixture of DCF and BPA compared with DCF tested alone. Product 1a was also detected in experiments with micropollutant-supplemented secondary effluent. Within 24 h 67% and 100% of DCF and BPA were transformed, respectively (25 U/ml). Experiments with a membrane reactor (volume 10 l; phosphate buffer, pH 7) were in good agreement with the results of the laboratory scale experiments (50 ml). EC₅₀-values were also determined. The data support the use of laccases for the removal or detoxification of recalcitrant pollutants. Thus, the enzyme laccase may be a component of an additional environmentally friendly process for the treatment stage of wastewater remediation.

Adsorption and degradation of 14C-bisphenol A in a soil trench

Bisphenol A (BPA) has caused widespread concern among scholars as a result of its estrogenic toxicity. It exists mainly in natural waters, sediments, and soil, as well as sewage and wastewater sludge. Considering that BPA is a common environmental pollutant that is removed along with chemical oxygen demand (COD), nitrogen, and phosphorus in drainage treatment systems, it is important to research the fate of BPA in sewage treatment systems. In this research, laboratory batch experiments on soil degradation and adsorption were conducted with ¹⁴C-BPA, aiming to discuss the transport and degradation characteristics of BPA in both simulated facilities and a soil trench. Based on the experimental results, the Freundlich model could be applied to fit the isothermal adsorption curve of the BPA in soil. A low mobility characteristic of BPA was discovered. The mineralization rate of BPA was fast and that of the reaction showed small fluctuations. After degradation, 21.3 and 17.7% of the BPA groups (the experimental group treated with ammonia oxidase (AMO) inhibitor and the control group) were converted into ¹⁴CO₂, respectively. This indicates that the nitrification and degradation of BPA had a certain competitive relationship. Besides, nitrification did not significantly affect the soil residue of BPA. Through the soil trench test, the average removal rate of BPA in the soil trench was 85.5%. ¹⁴CO₂ was discharged via the mineralization of BPA, accounting for 2.5% of the initial input. BPA easily accumulated in the bottom soil of the soil trench. BPA and its metabolites in the effluent accounted for 14.5% of the initial dosage. The residual extractable BPA and its metabolites in the soil accounted for 51.3%, and the remaining part of the unextractable residue represented 19.8% of the initial radioactive dosage.

Pilot-scale biopesticide production by Bacillus thuringiensis subsp. kurstaki using starch industry wastewater as raw material

Pilot-scale Bacillus thuringiensis based biopesticide production (2000 L bioreactor) was conducted using starch industry wastewater (SIW) as a raw material using optimized operational parameters obtained in 15 L and 150 L fermenters. In pilot scale fermentation process the oxygen transfer rate is a major limiting factor for high product yield. Thus, the volumetric mass transfer coefficient (K_La) remains a tool to determine the oxygen transfer capacity [oxygen utilization rate (OUR) and oxygen transfer rate (OTR)] to obtain better bacterial growth rate and entomotoxicity in new bioreactor process optimization and scale-up. This study results demonstrated that the oxygen transfer rate in 2000 L bioreactor was better than 15 L and 150 L fermenters. The better oxygen transfer in 2000 L bioreactor augmented the bacterial growth [total cell (TC) and viable spore count (SC)] and delta-endotoxin yield. Prepared a stable biopesticide formulation for field use and its entomotoxicity was also evaluated. This study result corroborates the feasibility of industrial scale operation of biopesticide production using starch industry wastewater as raw material.

Human exposure to endocrine disrupting compounds: Their role in reproductive systems, metabolic syndrome and breast cancer. A review

Endocrine disrupting chemicals (EDCs) are released into the environment from different sources. They are mainly used in packaging industries, pesticides and food constituents. Clinical evidence, experimental models, and epidemiological studies suggest that EDCs have major risks for humans by targeting different organs and systems in the body (e.g. reproductive system, breast tissue, adipose tissue, pancreas, etc.). Due to the ubiquity of human exposure to these compounds the aim of this review is to describe the most recent data on the effects induced by phthalates, bisphenol A and parabens in a critical window of exposure: in utero, during pregnancy, infants, and children. The interactions and mechanisms of toxicity of EDCs in relation to human general health problems, especially those broadening the term of endocrine disruption to 'metabolic disruption', should be deeply investigated. These include endocrine disturbances, with particular reference to reproductive problems and breast, testicular and ovarian cancers, and metabolic diseases such as obesity or diabetes.

Microbial network for waste activated sludge cascade utilization in an integrated system of microbial electrolysis and anaerobic fermentation

BACKGROUND

Bioelectrochemical systems have been considered a promising novel technology that shows an enhanced energy recovery, as well as generation of value-added products. A number of recent studies suggested that an enhancement of carbon conversion and biogas production can be achieved in an integrated system of microbial electrolysis cell (MEC) and anaerobic digestion (AD) for waste activated sludge (WAS). Microbial communities in integrated system would build a thorough energetic and metabolic interaction network regarding fermentation communities and electrode respiring communities. The characterization of integrated community structure and community shifts is not well understood, however, it starts to attract interest of scientists and engineers.

RESULTS

In the present work, energy recovery and WAS conversion are comprehensively affected by typical pretreated biosolid characteristics. We investigated the interaction of fermentation communities and electrode respiring communities in an integrated system of WAS fermentation and MEC for hydrogen recovery. A high energy recovery was achieved in the MECs feeding WAS fermentation liquid through alkaline pretreatment. Some anaerobes belonging to Firmicutes (Acetoanaerobium, Acetobacterium, and Fusibacter) showed synergistic relationship with exoelectrogens in the degradation of complex organic matter or recycling of MEC products (H2). High protein and polysaccharide but low fatty acid content led to the dominance of Proteiniclasticum and Parabacteroides, which showed a delayed contribution to the extracellular electron transport leading to a slow cascade utilization of WAS.

CONCLUSIONS

Efficient pretreatment could supply more short-chain fatty acids and higher conductivities in the fermentative liquid, which facilitated mass transfer in anodic biofilm. The overall performance of WAS cascade utilization was substantially related to the microbial community structures, which in turn depended on the initial pretreatment to enhance WAS fermentation. It is worth noting that species in AD and MEC communities are able to build complex networks of interaction, which have not been sufficiently studied so far. It is therefore important to understand how choosing operational parameters can influence reactor performances. The current study highlights the interaction of fermentative bacteria and exoelectrogens in the integrated system.

Microbial network for waste activated sludge cascade utilization in an integrated system of microbial electrolysis and anaerobic fermentation

BACKGROUND

Bioelectrochemical systems have been considered a promising novel technology that shows an enhanced energy recovery, as well as generation of value-added products. A number of recent studies suggested that an enhancement of carbon conversion and biogas production can be achieved in an integrated system of microbial electrolysis cell (MEC) and anaerobic digestion (AD) for waste activated sludge (WAS). Microbial communities in integrated system would build a thorough energetic and metabolic interaction network regarding fermentation communities and electrode respiring communities. The characterization of integrated community structure and community shifts is not well understood, however, it starts to attract interest of scientists and engineers.

RESULTS

In the present work, energy recovery and WAS conversion are comprehensively affected by typical pretreated biosolid characteristics. We investigated the interaction of fermentation communities and electrode respiring communities in an integrated system of WAS fermentation and MEC for hydrogen recovery. A high energy recovery was achieved in the MECs feeding WAS fermentation liquid through alkaline pretreatment. Some anaerobes belonging to Firmicutes (Acetoanaerobium, Acetobacterium, and Fusibacter) showed synergistic relationship with exoelectrogens in the degradation of complex organic matter or recycling of MEC products (H2). High protein and polysaccharide but low fatty acid content led to the dominance of Proteiniclasticum and Parabacteroides, which showed a delayed contribution to the extracellular electron transport leading to a slow cascade utilization of WAS.

CONCLUSIONS

Efficient pretreatment could supply more short-chain fatty acids and higher conductivities in the fermentative liquid, which facilitated mass transfer in anodic biofilm. The overall performance of WAS cascade utilization was substantially related to the microbial community structures, which in turn depended on the initial pretreatment to enhance WAS fermentation. It is worth noting that species in AD and MEC communities are able to build complex networks of interaction, which have not been sufficiently studied so far. It is therefore important to understand how choosing operational parameters can influence reactor performances. The current study highlights the interaction of fermentative bacteria and exoelectrogens in the integrated system.

Trace organic contaminants in biosolids: Impact of conventional wastewater and sludge processing technologies and emerging alternatives

This paper critically reviews the fate of trace organic contaminants (TrOCs) in biosolids, with emphasis on identifying operation conditions that impact the accumulation of TrOCs in sludge during conventional wastewater and sludge treatment and assessing the technologies available for TrOC removal from biosolids. The fate of TrOCs during sludge thickening, stabilisation (e.g. aerobic digestion, anaerobic digestion, alkaline stabilisation, and composting), conditioning, and dewatering is elucidated. Operation pH, sludge retention time (SRT), and temperature have significant impact on the sorption and biodegradation of TrOCs in activated sludge that ends up in the sludge treatment line. Anaerobic digestion may exacerbate the estrogenicity of sludge due to bioconversion to more potent metabolites. Application of advanced oxidation or thermal pre-treatment may minimise TrOCs in biosolids by increasing the bioavailability of TrOCs, converting TrOCs into more biodegradable products, or inducing complete mineralisation of TrOCs. Treatment of sludge by bioaugmentation using various bacteria, yeast, or fungus has the potential to reduce TrOC levels in biosolids.

Characterization of estrogenic receptor agonists and evaluation of estrogenic activity in the sediments of Liaohe River protected areas

Estrogenic activity of 12 sediment samples from Liaohe River protected areas was evaluated by the recombinant yeast bioassays. The bioassay-derived 17β-estradiol equivalents of crude extracts (Bio-EEQcrudes) were between 52.2 and 207.6pg/g dry weight. The most concerned estrogenic receptor (ER) agonists including estrone (E1), 17β-estradiol (E2), estriol (E3), 17α-ethynylestradiol (EE2), 4-nonylphenols (4-NP), bisphenol A (BPA), and organochlorine pesticides (OCPs) were determined. The concentrations of E1, E2, E3, EE2, BPA, andΣ10OCPs ranged up to 203.3pg/g, 185.8pg/g, 237.7pg/g, 188.5pg/g, 51.0ng/g, and 3.6ng/g, respectively. Taken together with polarity-based fractionation, in vitro bioassay and chemical analysis, it indicated that E1, E2, and EE2 were the predominant ER agonists and were mainly from the discharge of domestic wastewater and breeding wastewater. Meanwhile, this study showed that the establishment of protected areas had not obviously reduced the ecological risk caused by ER agonists in Liaohe River protected areas sediments.

Sustainable approaches for minimizing biosolids production and maximizing reuse options in sludge management: A review

Sludge generation during wastewater treatment is inevitable even with proper management and treatment. Yet proper handling and disposal of sludge are still challenging in terms of treatment cost, presence of recalcitrant contaminants of concern, sanitary issues, and public acceptance. Conventional disposal methods (i.e. landfilling, incineration) have created concerns in terms of legislative restrictions and community perception, incentivizing consideration of substitute sludge management options. Furthermore, with proper treatment, biosolids from sludge, rich in organic materials and nutrients, could be utilizable as fertilizer. Despite the challenges of dealing with sludge, no review has dealt with integrated source reduction and reuse as the best sustainable management practices for sludge treatment. In this review, we present two main approaches as potentially sustainable controls: (i) pretreatment for minimizing extensive sludge treatment, and (ii) recycling and reuse of residual sludge. Drawing on these approaches, we also suggest strategies for efficient pretreatment mechanisms and residual reuse, presenting ideas for prospective future research.

Removal of phenolic endocrine disrupting compounds from waste activated sludge using UV, H2O2, and UV/H2O2 oxidation processes: effects of reaction conditions and sludge matrix

Removal of six phenolic endocrine disrupting compounds (EDCs) (estrone, 17β-estradiol, 17α-ethinylestradiol, estriol, bisphenol A, and 4-nonylphenols) from waste activated sludge (WAS) was investigated using ultraviolet light (UV), hydrogen peroxide (H2O2), and the combined UV/H2O2 processes. Effects of initial EDC concentration, H2O2 dosage, and pH value were investigated. Particularly, the effects of 11 metal ions and humic acid (HA) contained in a sludge matrix on EDC degradation were evaluated. A pseudo-first-order kinetic model was used to describe the EDC degradation during UV, H2O2, and UV/H2O2 treatments of WAS. The results showed that the degradation of the 6 EDCs during all the three oxidation processes fitted well with pseudo-first-order kinetics. Compared with the sole UV irradiation or H2O2 oxidation process, UV/H2O2 treatment was much more effective for both EDC degradation and WAS solubilization. Under their optimal conditions, the EDC degradation rate constants during UV/H2O2 oxidation were 45-197 times greater than those during UV irradiation and 11-53 times greater than those during H2O2 oxidation. High dosage of H2O2 and low pH were favorable for the degradation of EDCs. Under the conditions of pH = 3, UV wavelength = 253.7 nm, UV fluence rate = 0.069 mW cm(-2), and H2O2 dosage = 0.5 mol L(-1), the removal efficiencies of E1, E2, EE2, E3, BPA, and NP in 2 min were 97%, 92%, 95%, 94%, 89%, and 67%, respectively. The hydroxyl radical (OH) was proved to take the most important role for the removal of EDCs. Metal ions in sludge could facilitate the removal of EDCs during UV/H2O2 oxidation. Fe, Ag, and Cu ions had more obvious effects compared with other metal ions. The overall role of HA was dependent on the balance between its competition as organics and its catalysis/photosensitization effects. These indicate that the sludge matrix plays an important role in the degradation of EDCs.

Corrosion and stability study of Bacillus thuringiensis var. kurstaki starch industry wastewater-derived biopesticide formulation

Biopesticides are usually sprayed on forests by using planes made up of aluminum alloy. Bioval derived from starch industry wastewater (SIW) in suspension form was developed as stable anticorrosive biopesticide formulation. In this context, various anticorrosion agents such as activated charcoal, glycerin, ethylene glycol, phytic acid, castor oil and potassium silicate were tested as anticorrosive agents. There was no corrosion found in Bioval formulation where potassium silicate (0.5% w/v) was added and compared with Foray 76 B, as an industrial standard, when stored over 6 months. In relation to other parameters, the anticorrosion formulation of Bioval+buffer+KSi reported excellent zeta potential (-33.19 ± 4 mV) and the viscosity (319.13 ± 32 mPa.s) proving it's stability over 6 months, compared to the standard biopesticide Foray 76 B (-36.62 ± 4 mV potential zeta, pH 4.14 ± 0.1 and 206 ± 21 mPa.s viscosity). Metal analysis of the different biopesticides showed that Bioval+buffer+KSi has no corrosion (5.11 ± 0.5 mg kg(-1) of Al and 13.53 ± 1.5 mg kg(-1) of Fe) on the aluminum alloy due to the contribution of sodium acetate buffer at pH 5. The bioassays reported excellent results for Bioval+Buffer+KSi (2.95 ± 0.3 × 10(9) CFU mL(-1) spores and 26.6 ± 2.7 × 10(9) IU L(-1) Tx) compared with initial Bioval (2.46 ± 0.3 × 10(9) CFU mL(-1) spores and 23.09 ± 3 × 10(9) IU L(-1) Tx) and Foray 76 B (2.3 ± 0.2 × 10(9) CFU mL(-1) spores and 19.950 ± 2.1 UI L(-1) Tx) which was due to the break-up of the external chitinous membrane due to abrasive action of potassium silicate after ingestion by insects. The contribution of sodium acetate buffer and potassium silicate (0.5% and at pH = 5) as anticorrosion agent in the Bioval allowed production of an efficient biopesticide with a reduced viscosity and favorable pH as compared to Foray 76 B which enhanced the entomotoxic potential against spruce budworm (SB) larvae (Lepidoptera: Choristoneura fumiferana).

Di 2-ethylhexylphtalate in the aquatic and terrestrial environment: a critical review

Phthalates are being increasingly used as softeners-plasticizers to improve the plasticity and the flexibility of materials. Amongst the different plasticizers used, more attention is paid to di (2-ethylhexylphtalate) (DEHP), one of the most representative compounds as it exhibits predominant effects on environment and human health. Meanwhile, several questions related to its sources; toxicity, distribution and fate still remain unanswered. Most of the evidence until date suggests that DEHP is an omnipresent compound found in different ecological compartments and its higher hydrophobicity and low volatility have resulted in significant adsorption to solids matrix. In fact, there are important issues to be addressed with regard to the toxicity of this compound in both animals and humans, its behavior in different ecological systems, and the transformation products generated during different biological or advanced chemical treatments. This article presents detailed review of existing treatment schemes, research gaps and future trends related to DEHP.

Fate of estrogenic hormones in wastewater and sludge treatment: A review of properties and analytical detection techniques in sludge matrix

Estrogenic hormones (estrone (E1), 17β-estradiol (E2), estriol (E3), 17α-ethinylestradiol (EE2)) are the major contributor to the total estrogenicity in waterways. Presence of these compounds in biosolids is also causing concern in terms of their use as soil amendment. In comparison with wastewater treatment, removal of estrogenic compounds in sewage sludge has received less attention. This paper presents a literature review regarding the source and occurrence of these pollutants in our environment. The removal pathways of estrogenic compounds in engineered systems, such as full-scale wastewater treatment plants (WWTPs), are also discussed. Review of the fate studies revealed that activated sludge system with nutrient removal shows very high (>90%) removal of estrogenic hormones in most of the cases. Although, aerobic digestion showed better attenuation of estrogenic compounds, anaerobic digestion increased the overall estrogenicity of biosolids. Finally, this paper highlights the challenges involved in analytical determination of these compounds in sewage sludge matrix.

Degradation of UV filters in sewage sludge and 4-MBC in liquid medium by the ligninolytic fungus Trametes versicolor

Ultraviolet (UV) filters are xenobiotic compounds that can enter the environment through the liquid effluent of wastewater treatment plants (WWTPs) and through adsorption in the sludge by-product because of their high hydrophobicity, as the sludge is subsequently applied as a fertiliser. A solid-state treatment of WWTP sludge with the white-rot fungus Trametes versicolor is reported in the present work as a feasible method for UV filter degradation, with reductions ranging from 87% in the case of 3-(4'-methylbenzylidene) camphor (4-MBC) to 100% for benzophenone-3 (BP3) and its metabolite 4,4'-dihydroxybenzophenone (4DHB). This study represents a first step in the development of a future fungal treatment for UV filters; thus, it is essential to prove that elimination is due only to the action of the fungus and not that of other microorganisms. To this end, the sludge was sterilised prior to fungal treatment. Biological assays indicate that T. versicolor readily eliminates oestrogenic activity, although it may be inefficient at eliminating other compounds, including some with dioxin-like activity. Degradation studies of 4-MBC in liquid media were also performed, and complete removal was achieved in less than 24 h. The main metabolites were identified, and the first steps of the transformation pathway were elucidated: a mono- or di-hydroxylation by cytochrome P450 and a subsequent conjugation with a pentose. None of 4-MBC transformation products was found to be responsible for increased dioxin-like activity in the sludge.

From wastewater to bioenergy and biochemicals via two-stage bioconversion processes: a future paradigm

Recovery of bioenergy and biochemicals from wastewater has attracted growing and widespread interests. In this respect, two-stage bioconversion process (TSBP) offers an appealing avenue to achieve stepwise and directional substrate conversion in separated stages. Such a biosystem not only enables enhanced degradation of organics, but also favors a high product yield and quality. Various TSBRs have been developed for the production of methane, hydrogen, electricity, bioplastics, bioflocculants, biopesticides, biosurfactants and other value-added products, demonstrating marked advantages over the conventional one-stage processes. It represents a promising, and likely the sole viable, paradigm for future application. However, there are also many remaining challenges. This paper provides an overview of the various TSBPs, introduces the recent advances, and discusses the major challenges and the future perspectives for practical application.

Effect of ultrasonication and Fenton oxidation on biodegradation of bis(2-ethylhexyl) phthalate (DEHP) in wastewater sludge

The presence of bis(2-ethylhexyl) phthalate (DEHP) and its metabolites, i.e. 2-ethylhexanol, 2-ethylhexanal, and 2-ethylhexanoic acid in wastewater sludge (WWS) were investigated during aerobic digestion and Bacillus thuringiensis (Bt)-based fermentation of WWS. Ultrasonication and Fenton oxidation pre-treatment was applied to improve biodegradability of WWS and bioavailability of the target compounds for digestion and fermentation. DEHP and 2-ethylhexanoic acid were observed at higher concentration, meanwhile 2-ethylhexanol and 2-ethylhexanal were observed at lower concentration in WWS. After 20-day aerobic digestion, DEHP removal was 72%, 89%, and 85%, and 2-ethylhexanoic acid removal was 71%, 84%, 79%, respectively for raw, ultrasonicated, and Fenton-oxidized sludges. Bt was found to degrade DEHP, leading to DEHP removal of 21%, 40%, and 30%, respectively for raw, ultrasonicated, and Fenton-oxidized sludges in the fermentation. The results suggested that aerobic stabilization and Bt-based fermentation can remove the phthalates, and pre-treatment of WWS was also effective in improvement of DEHP biodegradation. Hence, Bt-based biopesticide production from WWS can be applied safely when taking into consideration the phthalate contaminants.

Fate of endocrine-active compounds during municipal biosolids treatment: a review

For two decades, the fates of endocrine-disrupting compounds (EDCs) across various wastewater treatment processes have been studied using chemical and in vitro bioassay measurements. In comparison, little work has been conducted to track the fates of EDCs during municipal biosolids stabilization, particularly using bioassay approaches. This leads to knowledge gaps with respect to understanding which single or combined biosolid treatments facilitate EDC removal, and what the total endocrine-active potency of treated biosolids might be. These unknowns in turn heighten public opposition and distrust of biosolids reuse applications. This review aims to summarize what is currently known regarding EDC removal during commonly used full-scale biosolids treatment processes and highlights analytical challenges that are relevant when in vitro bioassays and chemical analyses are applied to biosolids samples.

Extraction of 17beta-estradiol in water using non-imprinted polymer submicron particles in membrane filters

17beta-Estradiol (E2) is an endocrine disrupting chemical of harm to both animals and human beings at a low concentration level (ng/L). It cannot be completely removed by wastewater treatments, and is often detected in both environment and drinking waters. The purpose of this feasibility study, towards environmental engineering in the field of water analysis and treatment, was to remove E2 by extraction using non-imprinted polymer (NIP) submicron particles. Experimental results showed that 0.5 mg/L of E2 could be completely extracted by adding 10 mg of NIP particles directly into 10 mL of water. However, the extraction efficiency decreased to 64% for 100 mL of water, prefilling the NIP particles inside a membrane filter showed a potential for water treatment of a large volume, requiring no effort to distribute the particles uniformly in the water. High extraction efficiency (80 +/- 10)% for E2 was achieved for 100 mL of water. A total mass of 0.29 mg E2 was extracted from 1000 mL of water containing 0.8 mg/L E2 (by using only 10 mg of NIP particles). Both efficiency and mass capacity can be increased, by scaling up the amount of NIP particles, towards environmental engineering applications.