Source apportionment of size resolved particulate matter at a European air pollution hot spot

Benzo[b]naphtho[d]thiophenes and naphthylbenzo[b]thiophenes: Their aryl hydrocarbon receptor-mediated activities and environmental presence

Polycyclic aromatic sulfur heterocyclic compounds (PASHs) belong among ubiquitous environmental pollutants; however, their toxic effects remain poorly understood. Here, we studied the aryl hydrocarbon receptor (AhR)-mediated activity of dibenzothiophene, benzo[b]naphtho[d]thiophenes, and naphthylbenzo[b]thiophenes, as well as their presence in two types of environmental matrices: river sediments collected from both rural and urban areas, and in airborne particulate matter (PM_2.5) sampled in cities with different levels and sources of pollution. Benzo[b]naphtho[2,1-d]thiophene, benzo[b]naphtho[2,3-d]thiophene, 2,2-naphthylbenzo[b]thiophene, and 2,1-naphthylbenzo[b]thiophene were newly identified as efficient AhR agonists in both rat and human AhR-based reporter gene assays, with 2,2-naphthylbenzo[b]thiophene being the most potent compound identified in both species. Benzo[b]naphtho[1,2-d]thiophene and 3,2-naphthylbenzo[b]thiophene elicited AhR-mediated activity only in the rat liver cell model, while dibenzothiophene and 3,1-naphthylbenzo[b]thiophene were inactive in either cell type. Independently of their ability to activate the AhR, benzo[b]naphtho[1,2-d]thiophene, 2,1-naphthylbenzo[b]thiophene, 3,1-naphthylbenzo[b]thiophene, and 3,2-naphthylbenzo[b]thiophene inhibited gap junctional intercellular communication in a model of rat liver epithelial cells. Benzo[b]naphtho[d]thiophenes were dominant PASHs present in both PM_2.5 and sediment samples, with benzo[b]naphtho[2,1-d]thiophene being the most abundant one, followed by benzo[b]naphtho[2,3-d]thiophene. The levels of naphthylbenzo[b]thiophenes were mostly low or below detection limit. Benzo[b]naphtho[2,1-d]thiophene and benzo[b]naphtho[2,3-d]thiophene were identified as the most significant contributors to the AhR-mediated activity in the environmental samples evaluated in this study. Both induced nuclear translocation of the AhR, and they induced CYP1A1 expression in a time-dependent manner, suggesting that their AhR-mediated activity may depend on the rate of their intracellular metabolism. In conclusion, some PASHs could be significant contributors to the overall AhR-mediated toxicity of complex environmental samples suggesting that more attention should be paid to the potential health impacts of this group of environmental pollutants.

Summertime Characteristics of Atmospheric Polycyclic Aromatic Hydrocarbons in a Coastal City of Northern Poland

Parent polycyclic aromatic hydrocarbons (PAHs) in the gas and particle fraction were measured between May and August 2021 at a coastal urban site in Poland, to examine their chemical characteristics, distribution, sources, deposition fluxes and interactions with basic meteorological drivers. The mean concentration of PAHs in the gas phase was significantly higher (26.26 ± 15.83 ng m^-3) than levels measured in the particle phase (1.77 ± 1.26 ng m^-3). The highest concentration in the gas phase was found for phenanthrene (Phe), followed by fluoranthene (Flt), acenaphthene (Ace) and naphthalene (Naph). The contribution from each group of PAHs to the total particulate phase accounted for 50%, 25%, 14% and 12% for 3-, 4-, 5- and 6-ring compounds, respectively. The mean ΣPAH deposition flux was 59 ± 24 ng m^-2 day^-1. During the whole field campaign, the efficient removal of PM-bound PAHs was typically observed after precipitation events. Based on statistical analysis, it was found that 4-ring PAHs were less effectively removed (25%) by daily precipitation as compared to 5- and 6-ring components, whose fluxes decreased by 32% and 53%, respectively. This study revealed local urban sources such as vehicular emissions, coal-fired power plants, shipping activities, docks/ports infrastructure and municipal solid waste recycling units as predominant contributors to PM-bound and gas-phase PAHs.

Atmospheric Deposition of Benzo[a]pyrene: Developing a Spatial Pattern at a National Scale

Benzo[a]pyrene (BaP), an indicator of polycyclic aromatic hydrocarbons (PAHs) in the atmosphere, is an important ambient air pollutant with significant human health and environmental effects. In the Czech Republic (CR), BaP, together with aerosol and ambient ozone, ranks (with respect to limit value exceedances and resulting population exposure) among the most problematic air pollutants. The aim of this study is to develop atmospheric deposition patterns of BaP in three years, namely 2012, 2015 and 2019, reflecting different BaP ambient levels. With respect to the available measurements, we accounted for dry deposition fluxes, neglecting wet contribution. We assumed, nevertheless, that the real atmospheric deposition is dominated by dry pathways in our conditions, which is supported by measurements from the rural site of Košetice. The dry deposition spatial pattern was constructed using an inferential approach, with two input layers, i.e., annual mean ambient air BaP concentrations, and deposition velocity of 0.89 cm·s−1. Though our results show an overall decrease in BaP loads over the years, the BaP deposition fluxes, in particular in the broader Ostrava region, remain very high. The presented maps can be considered an acceptable approximation of total BaP deposition and are useful for further detailed analysis of airborne BaP impacts on the environment.

Nitrated monoaromatic hydrocarbons (nitrophenols, nitrocatechols, nitrosalicylic acids) in ambient air: levels, mass size distributions and inhalation bioaccessibility

Nitrated monoaromatic hydrocarbons (NMAHs) are ubiquitous in the environment and an important part of atmospheric humic-like substances (HULIS) and brown carbon. They are ecotoxic and with underresearched toxic potential for humans. NMAHs were determined in size-segregated ambient particulate matter collected at two urban sites in central Europe, Ostrava and Kladno, Czech Republic. The average sums of 12 NMAHs (Σ12NMAH) measured in winter PM10 samples from Ostrava and Kladno were 102 and 93 ng m-3, respectively, and 8.8 ng m-3 in summer PM10 samples from Ostrava. The concentrations in winter corresponded to 6.3-7.3% and 2.6-3.1% of HULIS-C and water-soluble organic carbon (WSOC), respectively. Nitrocatechols represented 67-93%, 61-73% and 28-96% of NMAHs in PM10 samples collected in winter and summer at Ostrava and in winter at Kladno, respectively. The mass size distribution of the targeted substance classes peaked in the submicrometre size fractions (PM1), often in the PM0.5 size fraction especially in summer. The bioaccessible fraction of NMAHs was determined by leaching PM3 samples in two simulated lung fluids, Gamble's solution and artificial lysosomal fluid (ALF). More than half of NMAH mass is found bioaccessible, almost complete for nitrosalicylic acids. The bioaccessible fraction was generally higher when using ALF (mimics the chemical environment created by macrophage activity, pH 4.5) than Gamble's solution (pH 7.4). Bioaccessibility may be negligible for lipophilic substances (i.e. log KOW > 4.5).

Coal beneficiation technology to reduce hazardous heavy metals in fly ash

Fly ash emitted from the coal-fired power plant is the major contributor of the outdoor airborne particulate matters (PMs). Coal beneficiation, an industrial process to improve the quality of raw coal by removing ash-bearing components, can be a cost-effective sustainable and clean technology to reduce the emission of hazardous trace metals. As the removal efficiency of mineral matters and heavy metals within the coal is depend highly on the raw coal and the employed beneficiation process, a wide range of case studies at laboratory- and industrial-scale, published in the last 20 years, are reviewed in this study. Our review indicates that the coal beneficiation processes can effectively reduce content of heavy metals of fly ash, encouraging the use of clean coal to reduce pollutants emission.

Concentrations, sizes distributions, and seasonal variations of ambient air pollutants (particulates, trace metals) in Daya/Xitun District, Taichung, Central Taiwan: a case study at Taichung Science Park

Taichung Science Park in central Taiwan releases ambient air pollutants to the atmosphere. This issue has attracted much attention over the past few years. This study concerns seasonal concentrations of atmospheric particles and metallic elements and particle size distributions. A M.O.U.D.I sampler is used at a Taichung Science Park sampling site to obtain relevant data. Fe, followed by Al, had the highest average metallic element concentrations in particles of various sizes (PM₁₈, PM₁₀, PM_2.5, PM₁ and PM_<1(0.3)); Cd had the lowest. The average concentrations of metallic elements in particles of various sizes were lowest in the summer. Fe, Al and Cr had the three highest concentrations among all metallic elements for all particles sizes in all seasons. Ambient air particulate pollutants (crustal and anthropogenic metallic elements) were released from a single emission source at Taichung Science Park site.

Characterization of PM10 Sampled on the Top of a Former Mining Tower by the High-Volume Wind Direction-Dependent Sampler Using INNA

The PM10 concentrations in the studied region (Ostravsko-karvinská agglomeration, Czech Republic) exceed air pollution limit values in the long-term and pose a significant problem for human health, quality of life and the environment. In order to characterize the pollution in the region and identify the pollution origin, Instrumental Neutron Activation Analysis (INAA) was employed for determination of 34 elements in PM10 samples collected at a height of 90 m above ground level. From April 2018 to March 2019, 111 PM10 samples from eight basic wind directions and calm and two smog situations were sampled. The elemental composition significantly varied depending on season and sampling conditions. The contribution of three important industrial sources (iron and steelworks, cement works) was identified, and the long-range cross-border transport representing the pollution from the Polish domestic boilers confirmed the most important pollution inflow during the winter season.

Spatial-temporal variability of aerosol sources based on chemical composition and particle number size distributions in an urban settlement influenced by metallurgical industry

The Moravian-Silesian region of the Czech Republic with its capital city Ostrava is a European air pollution hot spot for airborne particulate matter (PM). Therefore, the spatiotemporal variability assessment of source contributions to aerosol particles is essential for the successful abatement strategies implementation. Positive Matrix Factorization (PMF) was applied to highly-time resolved PM_0.15-1.15 chemical composition (1 h resolution) and particle number size distribution (PNSD, 14 nm - 10 μm) data measured at the suburban (Ostrava-Plesná) and urban (Ostrava-Radvanice) residential receptor sites in parallel during an intensive winter campaign. Diel patterns, meteorological variables, inorganic and organic markers, and associations between the chemical composition factors and PNSD factors were used to identify the pollution sources and their origins (local, urban agglomeration and regional). The source apportionment analysis resolved six and four PM_0.15-1.15 sources in Plesná and Radvanice, respectively. In Plesná, local residential combustion sources (coal and biomass combustion) followed by regional combustion sources (residential heating, metallurgical industry) were the main contributors to PM_0.15-1.15. In Radvanice, local residential combustion and the metallurgical industry were the most important PM_0.15-1.15 sources. Aitken and accumulation mode particles emitted by local residential combustion sources along with common urban sources (residential heating, industry and traffic) were the main contributors to the particle number concentration (PNC) in Plesná. Additionally, accumulation mode particles from local residential combustion sources and regional pollution dominated the particle volume concentration (PVC). In Radvanice, local industrial sources were the major contributors to PNC and local coal combustion was the main contributor to PVC. The source apportionment results from the complementary datasets elucidated the relevance of highly time-resolved parallel measurements at both receptor sites given the specific meteorological conditions produced by the regional orography. These results are in agreement with our previous studies conducted at this site. Graphical abstract.

Characterization and Source Identification of Elements and Water-Soluble Ions in Submicrometre Aerosols in Brno and Šlapanice (Czech Republic)

Submicrometre aerosol particles (particulate matter, PM1) were collected in two Czech cities (Brno and Šlapanice) during week campaigns in winter and summer of 2009 and 2010. The aerosols were analysed for 14 elements and 12 water-soluble ions using inductively coupled plasma–mass spectrometry and ion chromatography techniques. The average PM1 mass concentration was 14.4 and 20.4 µg m−3 in Brno and Šlapanice, respectively. Most of the analysed elements and ions exhibit distinct seasonal variability with higher concentrations in winter in comparison to summer. The determined elements and ions together accounted for about 29% of total PM1 mass, ranging between 16% and 44%. Ion species were the most abundant components in collected aerosols, accounting for 27.2% of mass of PM1 aerosols, and elements accounted for 1.8% of mass of PM1 aerosols. One-day backward trajectories were calculated using the Hysplit model to analyse air masses transported towards the sampling sites. The Pearson correlation coefficients between individual PM1 components and PM1 mass and air temperature were calculated. To identify the main aerosol sources, factor analysis was applied. Six factors were identified for each locality. The following sources of PM1 particles were identified in Brno: a municipal incinerator, vehicle exhausts, secondary sulphate, a cement factory, industry and biomass burning. The identified sources in Šlapanice were as follows: a combustion source, coal combustion, a cement factory, a municipal incinerator, vehicle exhausts and industry.

Toxic potentials of particulate and gaseous air pollutant mixtures and the role of PAHs and their derivatives

BACKGROUND

Air pollution, which represents a major environmental risk to human health, comprises a complex mixture of compounds where only little is known about its specific toxicities.

OBJECTIVES

This study examined the specific toxicities associated with ambient air pollutant mixtures with respect to gas/particle partitioning, particulate matter (PM) size, pollutant polarity and bioaccessibility from PM, and evaluated the contribution of PAHs and their oxygenated and nitrated derivatives (OPAHs, NPAHs).

METHODS

Air samples (gas phase, PM₁₀ and size-segregated PM), were collected at urban (in winter and summer) and background (winter) sites in the Czech Republic. The total and bioaccessible concentrations were addressed using organic solvent extraction and simulated lung fluid extraction, respectively. Organic extracts were also further fractionated according to polarity. Aryl hydrocarbon receptor (AhR)-mediated activity, anti-/estrogenicity, anti-/androgenicity, thyroid receptor (TR)-mediated activity and cytotoxicity for bronchial cells were determined by human cell-based in vitro bioassays. The contribution of studied compounds to observed effects was assessed by both modelling and reconstructing the mixtures.

RESULTS

Significant effects were detected in the sub-micrometre size fraction of PM (estrogenicity, androgenicity, TR- and AhR-mediated activities) and in the gas phase (TR-mediated activity, antiandrogenicity). Compounds interacting with TR showed high bioaccessibility to simulated lung fluid. Relatively lower bioaccessibility was observed for estrogenicity and AhR-mediated activity. However, the toxicity testing of reconstructed mixtures revealed that the targeted pollutants are not the main contributors, except for urban PM air pollution in winter, where they accounted for 5-88% of several effects detected in the original complex environmental samples.

DISCUSSION

Studied toxicities were mostly driven by polar compounds largely attributed to the easily inhalable PM₁, which is of high relevance for human health risk assessment. Except of parent PAHs in some cases, the targeted compounds contributed to the detected effects mostly to a relatively low extent implying huge data gaps in terms of endocrine disruptive potencies of targeted substances and the significance of other polar compounds present in ambient air.

Oxygenated and Nitrated Polycyclic Aromatic Hydrocarbons in Ambient Air-Levels, Phase Partitioning, Mass Size Distributions, and Inhalation Bioaccessibility

Among the nitrated and oxygenated polycyclic aromatic hydrocarbons (NPAHs and OPAHs) are some of the most hazardous substances to public health, mainly because of their carcinogenicity and oxidative potential. Despite these concerns, the concentrations and fate of NPAHs and OPAHs in the atmospheric environment are largely unknown. Ambient air concentrations of 18 NPAHs, 5 quinones, and 5 other OPAHs were determined at two urban and one regional background sites in central Europe. At one of the urban sites, the total (gas and particulate) concentrations of Σ10OPAHs were 10.0 ± 9.2 ng/m3 in winter and 3.5 ± 1.6 ng/m3 in summer. The gradient to the regional background site exceeded 1 order of magnitude. Σ18NPAH concentrations were typically 1 order of magnitude lower than OPAHs. Among OPAHs, 9-fluorenone and (9,10)-anthraquinone were the most abundant species, accompanied by benzanthrone in winter. (9,10)-Anthraquinone represented two-thirds of quinones. We found that a large fraction of the target substance particulate mass was carried by submicrometer particles. The derived inhalation bioaccessibility in the PM10 size fraction is found to be ≈5% of the total ambient concentration of OPAHs and up to ≈2% for NPAHs. For 9-fluorenone and (9,10)-anthraquinone, up to 86 and 18%, respectively, were found at the rural site. Our results indicate that water solubility could function as a limiting factor for bioaccessibility of inhaled particulate NPAHs and OPAHs, without considerable effect of surfactant lipids and proteins in the lung lining fluid.

Ambient Air Quality in the Czech Republic: Past and Present

Based on an analysis of related core papers and reports, this review presents a historical perspective on ambient air pollution and ambient air quality development in the modern-day Czech Republic (CR) over the past seven decades, i.e., from the 1950s to the present. It offers insights into major air pollution problems, reveals the main hot spots and problematic regions and indicates the principal air pollutants in the CR. Air pollution is not presented as a stand-alone problem, but in the wider context of air pollution impacts both on human health and the environment in the CR. The review is arranged into three main parts: (1) the time period until the Velvet Revolution of 1989, (2) the transition period of the 1990s and (3) the modern period after 2000. Obviously, a major improvement in ambient air quality has been achieved since the 1970s and 1980s, when air pollution in the former Czechoslovakia culminated. Nevertheless, new challenges including fine aerosol, benzo[a]pyrene and ground-level ozone, of which the limit values are still vastly exceeded, have emerged. Furthermore, in spite of a significant reduction in overall emissions, the atmospheric deposition of nitrogen, in particular, remains high in some regions.

Long-Term Trends in PAH Concentrations and Sources at Rural Background Site in Central Europe

An increased burden due to polycyclic aromatic hydrocarbons (PAH) is a long-term air quality problem in Central and Eastern Europe. Extensive PAH monitoring has been implemented at the National Atmospheric Observatory Košetice (NAOK), a rural background site in the Czech Republic, as a representative for Central Europe. Data from NAOK are used for evaluation of PAH concentration trends and source apportionment. In total, concentrations of 14 PAHs in particulate matter (PM10) and in the gas phase between 2006 and 2016 were evaluated. The highest concentrations were measured at the beginning of the study period in 2006. Mean annual concentrations of benzo(a)pyrene, for example, showed a weak, however statistically significant decreasing trend. The positive matrix factorization (PMF) was used to determine the sources of PAHs at NAOK, with three factors resolved. The probable origin areas of PMF factors were identified by the conditional bivariate probability function (CBPF) and the potential source contribution function (PSCF) methods. The NAOK is affected by local sources of PAHs, as well as by regional and long-range transport. The PAH concentrations correlate negatively with industrial production and traffic intensity. High PAH emissions have been linked to local heating, suggesting that the planned replacement of obsolete combustion sources in the households could improve the overall air quality situation, not only with respect to PAHs.

Socio-Economic and Environmental Factors Related to Spatial Differences in Human Non-Tuberculous Mycobacterial Diseases in the Czech Republic

Non-tuberculous mycobacteria (NTM) are ubiquitous environmental bacteria that can induce pulmonary and non-pulmonary diseases in susceptible persons. It is reported that the prevalence of NTM diseases is increasing in developed countries, but this differs by regions and countries. NTM species distribution and the rate of diseases caused by NTM vary widely in the historical territories of Moravia and Silesia (Czech Republic). This epidemiologic study of NTM diseases covers the period 2012–2018, reviews isolates obtained from patients with clinical disease and investigates correlations with related socio-economic and environmental factors. Individual NTM patients were included only once during the studied period and results were presented as incidence rate per year. The most frequently isolated NTM meeting the microbiological and clinical criteria in the study were the Mycobacterium avium-intracellulare complex, followed by Mycobacterium kansasii and Mycobacteriumxenopi. A previously described endemic incidence of M.kansasii in the Karviná district and M.xenopi in the Ostrava district was also observed in this study. The incidence of NTM patients in the whole studied territory was 1.10/100,000 inhabitants (1.33/100,000 in men and 0.88/100,000 in women). The annual incidence of lymphadenitis in children (≤5 years of age) was 2.35/100,000 of the population of children during the 7 year period but increased in the year 2018 to 5.95/100,000. The rate of human tuberculosis in the studied area was 1.97/100,000 inhabitants. The incidence of NTM pulmonary diseases correlated with a lower socio-economic status (r = 0.63) and a higher concentration of benzo[a]pyrene pollution in the air (r = 0.64).

Assessment of air pollution origin based on year-long parallel measurement of PM2.5 and PM10 at two suburban sites in Prague, Czech Republic

From 2nd April 2008 to 28th March 2009, a total 248 daily samples of the PM_2.5 and PM₁₀ were collected every sixth day parallel at two suburban sites (Libuš and Suchdol) located at the two opposite sides (south and north, respectively) of Prague, Czech Republic. The PM_2.5 samples were analyzed for ions by ion chromatography (IC), organic and elemental carbon (OC and EC) by OC/EC analyzer and PM₁₀ samples also for 56 elements by inductively coupled plasma-mass spectrometry (ICP-MS). The average annual PM_2.5 and PM₁₀ was 24.4 ± 13.0 μg m^-3 and 26.7 ± 15.1 μg m^-3, respectively, in Prague-Libuš, and 25.1 ± 22.1 μg m^-3 and 27.1 ± 23.2 μg m^-3, respectively, in Prague-Suchdol. Since the species forming large part of the aerosol mass were strongly correlated (Spearman's rank correlation coefficient r_s > 0.80), the variability of PM_2.5 and PM₁₀ concentration was mainly driven by the local meteorology or regional and/or long range transport. PM₁₀ mass closure was calculated based on analytical results with the average percentage of recalculated mass of 77 ± 19% in Prague-Libuš and 86 ± 16% in Prague-Suchdol. The most abundant groups in PM₁₀ at both sites during the four seasons were OM (Prague-Libuš 34% and Prague-Suchdol 37%) and SIA (Prague-Libuš 30% and Prague-Suchdol 34%). The Positive Matrix Factorization (PMF) was applied to the chemical composition of PM₁₀ from both sites (124 samples) together to determine its sources. The nine factors were assigned as: mixed factor secondary sulphate and biomass burning, secondary sulphate, traffic, secondary nitrate, road dust, residential heating, aged sea salt, industry and mixed factor road salt along with aged sea salt. According to the polar plots and ventilation index (VI) east/west classification analysis the sources were separated based on origin to four categories local, urban agglomeration, regional and long range transport (LRT). The mixed source secondary sulphate and biomass burning, residential heating and industry were common sources of local origin at both sites. Prague-Suchdol was influenced by traffic related pollution from the urban agglomeration more than Prague-Libuš where the traffic and road dust/salt were of local origin. The regional pollution by secondary sulphates and nitrate was also relevant at both sites along with long range transport of sea salt from North Atlantic Ocean, Norwegian Sea and North Sea. The contribution of the local sources to PM₁₀ was significant mainly at Prague-Libuš site. However, the sources of regional origin were also important and influence of urban agglomeration pollution to PM₁₀ is not negligible as well.

The influence of local emissions and regional air pollution transport on a European air pollution hot spot

The EU air quality standards have been frequently exceeded in one of the European air pollution hot spots: Ostrava. The aim of this study was to perform an air quality comparison between an urban site (Radvanice), which has a nearby metallurgical complex, and a suburban site (Plesná) to estimate air pollution sources and determine their local and/or regional origins. Twenty-four hour PM₁ and PM₁₀ (particular matter) concentrations, detailed mass size distributions (MSDs) to distinguish the sources of the fine and coarse PM, and their chemical compositions were investigated in parallel at both sites during the winter of 2014. Positive matrix factorization (PMF) was applied to the PM₁ and PM₁₀ chemical compositions to investigate their sources. During the measurement campaign, prevailing northeastern-southwestern (NE-SW) wind directions (WDs) were recorded. Higher average PM₁₀ concentration was measured in Radvanice than in Plesná, whereas PM₁ concentrations were similar at both sites. A source apportionment analysis revealed six and five sources for PM₁₀ and PM₁, respectively. In Radvanice, the amount of PM and the most chemical species were similar under SW and NE WD conditions. The dominant sources were industrial (43% for PM₁₀ and 27% for PM₁), which were caused by a large metallurgical complex located to the SW, and biomass burning (25% for PM₁₀ and 36% for PM₁). In Plesná, the concentrations of PM and all species significantly increased under NE WD conditions. Secondary inorganic aerosols were dominant, with the highest contributions deriving from the NE WD. Therefore, regional pollution transport from the industrial sector in Silesian Province (Poland) was evident. Biomass burning contributed 22% and 24% to PM₁₀ and PM₁, respectively. The air quality in Ostrava was influenced by local sources and regional pollution transport. The issue of poor air quality in this region is complex. Therefore, international cooperation from both states (the Czech Republic and Poland) is needed to achieve a reduction in air pollution levels.

Comparison of PM2.5 chemical composition and sources at a rural background site in Central Europe between 1993/1994/1995 and 2009/2010: Effect of legislative regulations and economic transformation on the air quality

From December 1993 to January 1995 and from October 2009 to October 2010, a total of 320 and 365 daily samples of the PM_2.5 were collected at a rural background site (National Atmospheric Observatory Košetice) in Central Europe. The PM_2.5 samples were analyzed for 29 and 26 elements respectively by Particle-Induced X-ray Emission (PIXE) and water-soluble inorganic ions by Ion Chromatography (IC) in 2009/2010. The Positive Matrix Factorization (PMF) was applied to the chemical composition of PM_2.5 to determine its sources. The decreasing trends of almost all elements concentrations, especially the metals regulated by the EU Directive (2004/107/EC) are evident. The annual median ratios indicate a decrease in concentrations of the PM_2.5 elements. The slight increase of K concentrations and Spearman's rank correlation coefficient r_s 0.09 K/Se points to a rise in residential wood combustion. The S concentrations are nearly comparable (higher mean in 2009/2010, while the annual median ratio is under 1). The five major source types in the mid-1990s were ascribed to brown coal combustion, oil combustion, sea salt and dust - long-range transport, re-suspended dust and black coal combustion. The industrial combustion of brown and/or black coal (r_s 0.75 Se/As, r_s 0.57 Ga/Ge and r_s 0.20 As/Zn) and oil (r_s 0.72 V/Ni) of the regional origin dominated. In the 1990s, the potential source regions were the border area of Czech Republic, German and Poland (brown coal), the Moravia-Silesia region at the Czech-Polish border (black coal), and Slovakia, Austria, Hungary, and the Balkans (oil). In 2009/2010, the apportioned sources were sulfate, residential heating, nitrate, industry, re-suspended dust, and sea salt and dust - long-range transport. The secondary sulfate from coal combustion and residential biomass burning (r_s 0.96, K/K⁺) of local origin dominated. The declining trend of the elemental concentrations and change in the source pattern of the regional background PM2.5 in Central Europe between the mid-1990s and 2009/10 reflects the economic transformation and impact of stricter legislation in Central Europe.

Source apportionment of aerosol particles at a European air pollution hot spot using particle number size distributions and chemical composition

Ostrava in the Moravian-Silesian region (Czech Republic) is a European air pollution hot spot for airborne particulate matter (PM), polycyclic aromatic hydrocarbons (PAHs), and ultrafine particles (UFPs). Air pollution source apportionment is essential for implementation of successful abatement strategies. UFPs or nanoparticles of diameter <100 nm exhibit the highest deposition efficiency in human lungs. To permit apportionment of PM sources at the hot-spot including nanoparticles, Positive Matrix Factorization (PMF) was applied to highly time resolved particle number size distributions (NSD, 14 nm-10 μm) and PM_0.09-1.15 chemical composition. Diurnal patterns, meteorological variables, gaseous pollutants, organic markers, and associations between the NSD factors and chemical composition factors were used to identify the pollution sources. The PMF on the NSD reveals two factors in the ultrafine size range: industrial UFPs (28%, number mode diameter - NMD 45 nm), industrial/fresh road traffic nanoparticles (26%, NMD 26 nm); three factors in the accumulation size range: urban background (24%, NMD 93 nm), coal burning (14%, volume mode diameter - VMD 0.5 μm), regional pollution (3%, VMD 0.8 μm) and one factor in the coarse size range: industrial coarse particles/road dust (2%, VMD 5 μm). The PMF analysis of PM_0.09-1.15 revealed four factors: SIA/CC/BB (52%), road dust (18%), sinter/steel (16%), iron production (16%). The factors in the ultrafine size range resolved with NSD have a positive correlation with sinter/steel production and iron production factors resolved with chemical composition. Coal combustion factor resolved with NSD has moderate correlation with SIA/CC/BB factor. The organic markers homohopanes correlate with coal combustion and the levoglucosan correlates with urban background. The PMF applications to NSD and chemical composition datasets are complementary. PAHs in PM₁ were found to be associated with coal combustion factor.

Temporal and seasonal variations of black carbon in a highly polluted European city: Apportionment of potential sources and the effect of meteorological conditions

Black carbon - a primary component of particulate matter emitted from an incomplete combustion of fossil fuels, biomass, and biofuels - has been found to have a detrimental effect on human health and the environment. Since black carbon emissions data are not readily available, no measures are implemented to reduce black carbon emissions. The temporal and seasonal variations of black carbon concentrations were evaluated during 2012-2014. The data were collected in the highly polluted European city - Ostrava, Czech Republic, surrounded by major highways and large industries. Significantly higher black carbon concentrations were obtained in Ostrava, relative to other European cities and the magnitude was equivalent to the magnitude of black carbon concentrations measured in Poland and China. The data were categorized to heating and non-heating seasons based on the periodic pattern of daily and monthly average concentrations of black carbon. A higher black carbon concentration was obtained during heating season than non-heating season and was primarily associated with an increase in residential coal burning and meteorological parameters. The concentration of black carbon was found to be negatively correlated with temperature and wind speed, and positively correlated with the relative humidity. Other black carbon sources potentially included emissions from vehicle exhaust and the local steel-producing industry.

Impact of fugitive sources and meteorological parameters on vertical distribution of particulate matter over the industrial agglomeration

The aim of the study was to characterize vertical distribution of particulate matter, in an area well known by highest air pollution levels in Europe. A balloon filled with helium with measuring instrumentation was used for vertical observation of air pollution over the fugitive sources in Moravian-Silesian metropolitan area during spring and summer. Synchronously, selected meteorological parameters were recorded together with particulate matter for exploration its relationship with particulate matter. Concentrations of particulate matter in the vertical profile were significantly higher in the spring than in the summer. Significant effect of fugitive sources was observed up to the altitude ∼255 m (∼45 m above ground) in both seasons. The presence of inversion layer was observed at the altitude ∼350 m (120-135 m above ground) at locations with major source traffic load. Both particulate matter concentrations and number of particles for the selected particle sizes decreased with increasing height. Strong correlation of particulate matter with meteorological parameters was not observed. The study represents the first attempt to assess the vertical profile over the fugitive emission sources - old environmental burdens in industrial region.

Source Impact Determination using Airborne and Ground Measurements of Industrial Plumes

Industrial particulate matter (PM) air pollution exposing nearby residential areas forms several European air pollution hot-spots. One of these hot-spot is the residential district of Ostrava Radvanice-Bartovice with frequent exceedances for PM and benzo[a]pyrene B[a]P, a carcinogenic polycyclic aromatic hydrocarbon (PAH) of MW > 228 amu. Such PAHs are highly bonded to the ultrafine particles (UFPs), the smallest PM size fraction, which deposits most efficiently in the alveolar region of human lungs. Airborne measurements identified UFP point sources in the adjacent metallurgical complex and mapped limited horizontal and vertical dispersion of industrial plumes enriched with UFPs (3.2 × 10(5)cm(-3)). The plumes, episodes of simultaneous peaks of UFPs (1.4 × 10(5)cm(-3)), SO2 (88.2 ppb), and CO (11.3 ppm), were recorded on the ground downwind in the residential district when wind speeds >1 ms(-1). In the plumes, UFPs were mostly 19-44 nm in diameter, enriched with PAHs/B[a]P up to 43.8/3.5 mg·g(-1). Electron microscopy showed that these plume UFPs were mostly agglomerates of spherules of 30-50 nm in diameter. These source impact measurements, that combine airborne and ground-level measurements, are applicable to clearly identify specific industrial air pollution sources and provide information to assess their possible impact to human health in similar hot-spots worldwide.

Contribution of heavy metals to toxicity of coal combustion related fine particulate matter (PM2.5) in Caenorhabditis elegans with wild-type or susceptible genetic background

Contribution of chemical components in coal combustion related fine particulate matter (PM2.5) to its toxicity is largely unclear. We focused on heavy metals in PM2.5 to investigate their contribution to toxicity formation in Caenorhabditis elegans. Among 8 heavy metals examined (Fe, Zn, Pb, As, Cd, Cr, Cu, and Ni), Pb, Cr, and Cu potentially contributed to PM2.5 toxicity in wild-type nematodes. Combinational exposure to any two of these three heavy metals caused higher toxicity than exposure to Pb, Cr, or Cu alone. Toxicity from the combinational exposure to Pb, Cr, and Cu at the examined concentrations was higher than exposure to PM2.5 (100 mg/L). Moreover, mutation of sod-2 or sod-3 gene encoding Mn-SOD increased susceptibility in nematodes exposed to Fe, Zn, or Ni, although Fe, Zn, or Ni at the examined concentration did not lead to toxicity in wild-type nematodes. Our results highlight the potential contribution of heavy metals to PM2.5 toxicity in environmental organisms.

Size-segregated urban particulate matter: mass closure, chemical composition, and primary and secondary matter content

Forty-nine components of ambient particulate matter (PM) in size-fractionated PM were investigated at an urban background site in Katowice (Silesian Agglomeration in Southern Poland) in the non-heating season of 2012. PM was analyzed for two groups of carbon compounds (organic (OC) and elemental (EC) carbon, Lab OC-EC Aerosol Analyzer), five major water-soluble ions (NH₄⁺, Cl^-, SO₄^2-, NO₃^-, and Na⁺ contents in PM water extracts, ion chromatography), 26 elements (X-ray fluorescence spectrometry), and 16 polycyclic aromatic hydrocarbons (PAHs, gas chromatography). The distributions of the masses of these components among 13 basic PM fractions were determined, and chemical mass closure was checked for each of these fractions separately. The particles having their aerodynamic diameters in the interval 0.03-0.26 μm, the fraction PM_0.03-0.26, contributed about 13 % to the total PM mass. This PM fraction consisted of primary particles predominantly composed of various inorganic compounds, primary organic compounds, and, in lesser amounts, of elemental carbon, secondary ions, and secondary organic compounds. The second particle fraction, PM_0.26-1.6, consisted mainly of secondary matter, and its mass contribution to the total PM mass was about 59 %. The third fraction, PM_1.6-40, was a fraction of coarse particles composed of mineral/soil and organic matter and elemental carbon. It contributed to the PM mass about 28 %. For each of PM_0.03-0.26, PM_0.26-1.6, and PM_1.6-40, the health hazard from its 16 PAH contents was determined by computing toxicity factors. PM_0.26-1.6 posed the greatest health hazard from the mixture of the 16 PAHs that it contained, PM_1.6-40 was the next, and the hazard from the PM_0.03-0.26-bound 16 PAHs was the smallest. The molecular diagnostic ratios computed for these three fractions were specific for coal and wood combustion; some indicated the road traffic effects.

Day-to-day variability of toxic events induced by organic compounds bound to size segregated atmospheric aerosol

This study quantified the temporal variability of concentration of carcinogenic polycyclic aromatic hydrocarbons (c-PAHs), genotoxicity, oxidative DNA damage and dioxin-like activity of the extractable organic matter (EOM) of atmospheric aerosol particles of aerodynamic diameter (dae, μm) coarse (1 < dae < 10), upper- (0.5 < dae < 1) and lower-accumulation (0.17 < dae < 0.5) and ultrafine (<0.17) fractions. The upper accumulation fraction formed most of the aerosol mass for 22 of the 26 study days and contained ∼44% of total c-PAHs, while the ultrafine fraction contained only ∼11%. DNA adduct levels suggested a crucial contribution of c-PAHs bound to the upper accumulation fraction. The dioxin-like activity was also driven primarily by c-PAH concentrations. In contrast, oxidative DNA damage was not related to c-PAHs, as a negative correlation with c-PAHs was observed. These results suggest that genotoxicity and dioxin-like activity are the major toxic effects of organic compounds bound to size segregated aerosol, while oxidative DNA damage is not induced by EOM.

Adverse effects of coal combustion related fine particulate matter (PM2.5) on nematode Caenorhabditis elegans

The toxic effects of coal combustion related fine particulate matter (PM2.5), collected from Datong, Shanxi province, China, on nematode Caenorhabditis elegans were investigated. Exposure to PM2.5 resulted in deficits in development, reproduction, locomotion behavior, and lifespan, and induction of intestinal autofluorescence or reactive oxygen species (ROS) production. Prolonged exposure to PM2.5 led to more severe toxicity on nematodes than acute exposure. In addition, exposure to PM2.5 induced altered expression patterns of genes required for the control of oxidative stress. Reduction in mean defecation cycle length and developmental deficits in AVL and DVB neurons, which are involved in the control of defecation behavior, were also triggered by PM2.5 exposure. Thus, oxidative stress and abnormal defecation behavior may contribute greatly to the toxicity of coal combustion related PM2.5 in nematodes. The results also imply that the long-term adverse effects of coal combustion related PM2.5 on environmental organisms should be carefully considered.