Effect of coating on the environmental applications of zero valent iron nanoparticles: the lindane case

Remediation of lindane contaminated soil by fluidization-like dielectric barrier discharge

This study proposed the fluidization-like dielectric barrier discharge (DBD) plasma for the remediation of lindane contaminated soil and integrated physical and chemical reaction pathway. Soil particle distribution within the reactor was simulated with Euler-Euler and Gidaspow drag models, and a bipolar pulsed power supply was applied to energize the DBD reactor after full fluidized. The effect of soil particles movement on electric features was discussed in terms of voltage waveforms and Lissajous figures. Lindane degradation was found to be related to electrics parameters and soil properties. Soil samples before and after treatment were analyzed by XRD and SEM methods. A 95.98% lindane decomposition and 0.66 mg_Lindane/h average reaction rate were obtained with 3 wt% CaO injection by pulse power drove fluidization-like DBD after 32 min treatment. Ozone was proved to play a major role during lindane degrading by plasma. The reaction potential pathway of lindane decomposition contains 4 steps, including dehydrogen, dehydrochlorination, and dechlorination, respectively.

Electrochemical Reduction and Oxidation of Chlorinated Aromatic Compounds Enhanced by the Fe-ZSM-5 Catalyst: Kinetics and Mechanisms

Devising cost-effective electrochemical catalyst system for the efficient degradation of chlorinated aromatic compounds is urgently needed for environmental pollution control. Herein, a Fe-ZSM-5 zeolite was used as a suspended catalyst to facilitate the degradation of lindane as a model chlorinated pesticide in an electrochemical system consisting of the commercial DSA (Ti/RuO₂-IrO₂) anode and graphite cathode. It was found that the Fe-ZSM-5 zeolite greatly accelerated the degradation of lindane, with the degradation rate constant more than 8 times higher than that without Fe-ZSM-5. In addition, the Fe-ZSM-5 zeolite widened the working pH range from 3 to 11, while efficient degradation of lindane in the absence of Fe-ZSM-5 was only obtained at pH ≤ 5. The degradation of lindane was primarily due to reductive dechlorination mediated by atomic H* followed by ^•OH oxidation. Fe-ZSM-5 zeolite could enrich lindane, H*, and ^•OH on its surface, thus provided a suitable local environment for lindane degradation. The Fe-ZSM-5 zeolite exhibited high stability and reusability, and reduced the energy consumption. This research provides a potential reduction-oxidation strategy for removing organochlorine compounds through a cost-efficient Fe-ZSM-5 catalytic electrochemical system.

Electro and magnetoactive printed bi-functional actuators based on alginate hybrid hydrogels

Soft materials are attracting much attention for the development of biostructures able to mimic the movement of natural systems by remote actuation. Multi-sensitive hydrogels are among the best materials for obtaining dynamic and biocompatible soft structures for soft actuators and related biomedical devices. Nevertheless, bioinks based on naturally occurring and stimuli responsive hydrogels able to be 3D printed continues being a challenge for advanced applications. In this work 3D printable electrically and magnetically responsive, non-cytotoxic, hybrid hydrogels based on alginate and zero monovalent iron nanoparticles (NPs) are presented. The effect of NPs addition on the physico-chemical properties of the hydrogels is addressed, together with its effect on the functional electroactive and magnetoactive response. NPs concentration up to 10 % do not affect the mechanical stability of the gels, while promoting an increase actuation response.

Iron turning waste: Low cost and sustainable permeable reactive barrier media for remediating dieldrin, endrin, DDT and lindane in groundwater

The feasibility and effectiveness of iron turning waste as low cost and sustainable permeable reactive barrier (PRB) media for remediating dieldrin, endrin, dichlorodiphenyltrichloroethane (DDT), and lindane individually (batch system) and combined (continuous flow column) in water were investigated. After 10 min of reaction in a batch system, removal of endrin, dieldrin, and DDT was higher (86-91 %) than lindane (41 %) using 1 g of iron turning waste in 200 mL of pesticide solution (20 μg/L for each pesticide). Among the studied pesticides, only lindane removal decreased substantially in the presence of nitrate (37 %) and magnesium (18 %). Acidic water environment (pH = 4) favored the pesticide removal than neutral and basic environments. For the column experiments, sand alone as PRB media was ineffective for remediating the pesticides in water. When only iron turning was used, the removal efficiencies of lindane, endrin, and dieldrin were 83-88 % and remained stable during 60 min of the experiments. DDT removal was less than other pesticides (58 %). Sandwiching the iron turning waste media between two sand layers improved DDT removal (79 %) as well as limited the iron content below a permissible level in product water. In a long-term PRB column performance evaluation, iron turning waste (150 g) removed all pesticides in water (initial concentration of each pesticide = 2 μg/L) effectively (≥94 %) at a hydraulic retention time of 1.6 h. Iron turning waste, which was mainly in the form of zerovalent iron (Fe⁰), was oxidized to ferrous (Fe²⁺) and ferric (Fe³⁺) iron during its reaction with pesticides, and electrons donated by Fe⁰ and Fe²⁺ were responsible for complete dechlorination of all the pesticides. Therefore, it can be used as inexpensive and sustainable PRB media for groundwater remediation especially in developing countries where groundwater contamination with pesticides is more prevalent.

A green approach to DDT degradation and metabolite monitoring in water comparing the hydrodechlorination efficiency of Pd, Au-on-Pd and Cu-on-Pd nanoparticle catalysis

DDT (1,1,1-trichloro-2,2-bi(p-chlorophenyl)-ethane) and its metabolites (DDD, 1,1-dichloro-2,2-bis-(4'-chlorophenyl)ethane, and DDE, 1,1-dichloro-2,2-bis-(4'-chlorophenyl)ethylene) are persistent organic pollutants that can be catalytically degraded into a less toxic and less persistent compound. In this work, ecofriendly methodologies for catalyst synthesis, catalytic degradation of DDT and reaction monitoring have been proposed. Three types of Pd-based nanoparticles, NPs, (Pd, Au-on-Pd and Cu-on-Pd) were synthesized and used for catalytic hydrodechlorination of DDT and its metabolites. The structural and electronic properties of NPs were investigated using TEM and XAS spectroscopy. Au-on-Pd showed the highest hydrodechlorination efficiency within 1 h of reaction. To obtain the best reaction conditions, the effects of H₂ flow and base addition Au-on-Pd NPs activity were investigated. To study the effectiveness of the different NPs, a solvent-free analytical method was optimized to detect and measure DDT and its by-products. The SPME-GC-MS method provided low detection limits (0.03 μg L^-1) and high recovery (≥88.75%) and was a valuable tool for the NP degradation study. In this way, a green method for degradation and monitoring of DDT and its by-products in water was achieved.

Nanoparticle Beads of Chitosan-Ethylene Glycol Diglycidyl Ether/Fe for the Removal of Aldrin

This article reports on the preparation of iron nanoparticles (FeNPs) supported in chitosan beads (Chi-EDGE-Fe) for removing aldrin from aqueous solutions. The FeNPs and Chi-EDGE-Fe beads were characterized by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR), and the Mössbauer spectroscopy (MS) techniques. TEM, XRD, and MS showed that the FeNPs had core-shell structures consisting of a core of either Fe0 or Fe2B and a shell of magnetite. Furthermore, SEM images showed that Chi-EDGE-Fe beads were spherical with irregular surfaces and certain degrees of roughness and porosity, whilst the sorbent mean pore size was 204 nm, and the occluded iron nanoparticles in the chitosan material had diameters of 70 nm and formed agglomerates. The sorbent beads consisted of carbon, oxygen, chlorine, aluminum, silicon, and iron according to the SEM-EDS analysis. Functional groups such as O-H, C-H, -CH2, N-H, C-O, C-OH, and Fe-OH were detected in the FTIR spectra. In addition, a characteristic band appeared at about 1700 cm−1 after the sorption process involving aldrin. MS also showed that the iron nanoparticles in the beads probably oxidized into NPs of α-Fe2O3 as a result of the supporting process. The isotherm of the aldrin removal followed the Langmuir–Freundlich model and presented a maximum adsorption capacity of 74.84 mg/g, demonstrating that chitosan-Fe beads are promising sorbents for the removal of toxic pollutants in aqueous solutions.

Biotechnology and nanotechnology for remediation of chlorinated volatile organic compounds: current perspectives

Chlorinated volatile organic compounds (CVOCs) are persistent organic pollutants which are harmful to public health and the environment. Many CVOCs occur in substantial quantities in groundwater and soil, even though their use has been more carefully managed and restricted in recent years. This review summarizes recent data on several innovative treatment solutions for CVOC-affected media including bioremediation, phytoremediation, nanoscale zero-valent iron (nZVI)-based reductive dehalogenation, and photooxidation. There is no optimally developed single technology; therefore, the possibility of using combined technologies for CVOC remediation, for example bioremediation integrated with reduction by nZVI, is presented. Some methods are still in the development stage. Advantages and disadvantages of each treatment strategy are provided. It is hoped that this paper can provide a basic framework for selection of successful CVOC remediation strategies.

Phytoremediation of polycyclic aromatic hydrocarbons (PAHs) in mangrove sediments using Rhizophora mangle

A phytoremediation experiment was carried out in mesocosms to investigate the performance of Rhizophora mangle in the remediation of polycyclic aromatic hydrocarbons (PAHs) in mangrove sediment contaminated with crude oil. The water pH of the experiments (phytoremediation and natural attenuation) ranged from 4.9 to 8.4 at 0 and 90 days, respectively. The oxy-reduction potential (Eh) ranged from oxidising (108.0 mV, time 0) to reducing (approximately -110.0 mV, time 90) environments. Dissolved oxygen (DO) ranged from 5.7 mg L^-1 (time 0) to 4.5 mg L^-1 and 3.6 mg L^-1 (time 90) in phytoremediation and natural attenuation, respectively. The sediments had silty texture and an average concentration of 5% organic matter (OM). Phytoremediation (60.76%) showed better efficiency in the remediation of the 16 PAHs compared to natural attenuation (49.57%). Principal component analyses showed a correlation between the concentrations of PAHs with pH, Eh, OM and DO in both experiments.

Zero-Valent Iron Nanoparticles for Soil and Groundwater Remediation

Zero-valent iron has been reported as a successful remediation agent for environmental issues, being extensively used in soil and groundwater remediation. The use of zero-valent nanoparticles have been arisen as a highly effective method due to the high specific surface area of zero-valent nanoparticles. Then, the development of nanosized materials in general, and the improvement of the properties of the nano-iron in particular, has facilitated their application in remediation technologies. As the result, highly efficient and versatile nanomaterials have been obtained. Among the possible nanoparticle systems, the reactivity and availability of zero-valent iron nanoparticles (NZVI) have achieved very interesting and promising results make them particularly attractive for the remediation of subsurface contaminants. In fact, a large number of laboratory and pilot studies have reported the high effectiveness of these NZVI-based technologies for the remediation of groundwater and contaminated soils. Although the results are often based on a limited contaminant target, there is a large gap between the amount of contaminants tested with NZVI at the laboratory level and those remediated at the pilot and field level. In this review, the main zero-valent iron nanoparticles and their remediation capacity are summarized, in addition to the pilot and land scale studies reported until date for each kind of nanomaterials.

Remediation of Anthracene-Contaminated Soil with Sophorolipids-SDBS-Na2SiO3 and Treatment of Eluting Wastewater

The soil pollution of polycyclic aromatic hydrocarbons (PAHs) is serious in China, which not only affects the living and growing environment of plants and animals but also has a great impact on people’s health. The use of hydrophobic organic compounds to make use of surfactant ectopic elution processing is more convenient and cheaper as a repair scheme and can effectively wash out the polycyclic aromatic hydrocarbons in the soil. Therefore, we mixed sophorolipids:sodium dodecylbenzene sulfonate (SDBS):Na2SiO3 according to the mass ratio of 1:15:150. We explored the influencing factors of high and low concentrations of PAH-contaminated soil using a single factor test and four factors at a two-level factorial design. Then, the elution wastewater was treated by ultrasonic oxidation technology and the alkali-activated sodium persulfate technology. The results showed that: (1) In the single factor test, when the elution time is 8 h, the concentration of the compounded surfactant is 1200 mg/L, the particle size is 60 mesh, the concentration of NaCl is 100 mmol/L, and the concentration of KCl is 50 mmol/L, and the effect of the PAH-contaminated soil eluted by the composite surfactant is the best. Externally added NaCl and KCl salt ions have a more obvious promotion effect on the polycyclic aromatic hydrocarbon-contaminated soil; (2) in the interaction experiment, single factor B (elution time) and D (NaCl concentration) have a significant main effect. There is also a certain interaction between factor A (concentration agent concentration) and factor D, factor B, and factor C (KCl concentration); (3) the treatment of anthracene in the eluate by ultrasonic completely mineralizes the organic pollutants by the thermal and chemical effects produced by the ultrasonic cavitation phenomenon, so that the organic pollutants in the eluate are oxidized and degraded into simple environmentally friendly small molecular substances. When the optimal ultrasonic time is 60 min and the ratio of oxidant to activator is 1:2, the removal rate of contaminants in the eluent can reach 63.7%. At the same time, the turbidity of the eluent is significantly lower than that of the liquid after centrifugal separation, indicating that oxidants can not only remove the pollutants in elution water but also remove the residual soil particulate matter; and (4) by comparing the infrared spectrum of the eluted waste liquid before and after oxidation, it can be seen that during the oxidation process, the inner part of eluent waste liquid underwent a ring-opening reaction, and the ring-opening reaction also occurred in the part of the cyclic ester group of the surfactant, which changed from a ring to non-ring.

Chemical oxidation and reduction of hexachlorocyclohexanes: A review

Lindane (γ-hexachlorocyclohexane) and its isomers (HCH) are some of the most common and most easily detected organochlorine pesticides in the environment. The widespread distribution of lindane is due to its use as an insecticide, accompanied by its persistence and bioaccumulation, whereas HCH were disposed of as waste in unmanaged landfills. Unfortunately, certain HCH (especially the most reactive ones: γ- and α-HCH) are harmful to the central nervous system and to reproductive and endocrine systems, therefore development of suitable remediation methods is needed to remove them from contaminated soil and water. This paper provides a short history of the use of lindane and a description of the properties of HCH, as well as their determination methods. The main focus of the paper, however, is a review of oxidative and reductive treatment methods. Although these methods of HCH remediation are popular, there are no review papers summarising their principles, history, advantages and disadvantages. Furthermore, recent advances in the chemical treatment of HCH are discussed and risks concerning these processes are given.

Filter paper supported nZVI for continuous treatment of simulated dyeing wastewater

In this study, polyacrylic acid modified filter paper (FP/PAA) was synthesized by in-situ polymerization of acrylic acid, which was used as a matrix to chelate nano-scale zero valent iron (nZVI). The loading content of nZVI in the filter paper reached 24.8%. The fabricated composite FP/PAA/nZVI was characterized by SEM, FT-IR and TGA respectively. Moreover, it was used for the removal of methyl blue and methylene blue as model anionic and cationic dyes. The effect of initial dye concentration on decolorization efficiency was investigated. The results showed that FP/PAA/nZVI enhanced the removal of dye from the simulated dye wastewater and the decolorization efficiency exceeded 95% for the dye solutions lower than 20 mg/L. More importantly, the filter paper supported nZVI realized the continuous treatment of simulated dye wastewater by a simple filtration process. This study hopes to serve as a basis for the application of nZVI in textile wastewater treatment.

In-situ reductive degradation of chlorinated DNAPLs in contaminated groundwater using polyethyleneimine-modified zero-valent iron nanoparticles

Zero-valent iron nanoparticles (ZVIN) have found applications in many strategies for on-site soil and groundwater decontamination. A number of studies have reported the prospective utilization of ZVIN in the reduction of chlorinated organic compounds such as dense non-aqueous phase liquids (DNAPLs) in groundwater. Due to their bioaccumulation and carcinogenesis, DNAPLs in groundwater are a human health hazard and pose environmental risks. Therefore, decontamination of these contaminants is necessary. This study presents the in-situ remediation of trichloroethylene (TCE), perchloroethene (PCE), and 1,2-dichloroethene (1,2-DCE) DNAPLs through the direct injection of polyethylenimine (PEI)-coated ZVIN (PEI-ZVIN composite materials) to facilitate the reduction of contaminants in low-permeability media. A field test was conducted at the premises of a petrochemical company, situated in the Miaoli County of Northern Taiwan that discharged significant amounts of DNAPLs. After in-situ injection and one-day of reaction with groundwater contaminants, ZVIN was further characterized to examine its efficacy in the reduction of pollutants. After the direct injection of PEI-ZVIN, a notable reduction in the concentration of DNAPLs was recorded with conversion from toxic to non-toxic substances. Use of resistivity image profiling (RIP) technique suggested similar conductivity data for the PEI-coated ZVIN suspension and groundwater samples. X-ray absorption near edge structure (XANES) and X-ray absorption fine structure (EXAFS) studies depicted that the oxidation of ZVIN and PEI-ZVIN was occurring after the reductive reaction with contaminated groundwater. The reacted samples had bond distance values of 1.98, 2.00, 1.96, and 1.94 Å. Combining floating surface-coated ZVIN and RIP technique seems promising and environmentally attractive.

Enhanced polycyclic aromatic hydrocarbons degradation in rhizosphere soil planted with tall fescue: Bacterial community and functional gene expression mechanisms

To investigate the bacterial mechanisms of polycyclic aromatic hydrocarbons (PAHs) degradation in an aged-contaminated agricultural soil planted with tall fescue (Festuca arundinacea), a rhizo-box experiment was carried out for 60 d. Shifts in bacterial community structure in the soils during the experiment were performed using denaturing gradient gel electrophoresis. The abundance and activity of total bacteria and PAH-degraders were measured by quantification of 16S rDNA, PAH-ring hydroxylating dioxygenase (PAH-RHDα) genes and their transcripts, respectively. The residual PAH concentrations were monitored using high-performance liquid chromatography analysis. Results showed that the removal percentage of total PAHs in rhizosphere soil was 11% higher than that in unplanted soil. Soil bacteria were dominated by Alphaproteobacteria (48.4%) and Gammaproteobacteria (25.8%). Tall fescue positively affected the abundance and activity of total bacteria in the soil, and stimulated RHDα gram-negative (GN) gene expression while inhibiting RHDα gram-positive gene expression. PAH dissipation in rhizosphere soil could be ascribed to modifications in the bacterial community structure, increase in the abundance of PAH-degraders, and enhancement of the RHDα GN gene expression during the incubation.