Novel carbon nanotube (CNT)-based ultrasensitive sensors for trace mercury(II) detection in water: A review

Chromoionophoric molecular probe infused bimodal porous polymer rostrum as solid-state ocular sensor for the selective and expeditious optical sensing of ultra-trace toxic mercury ions

This study presents a distinctive solid-state naked-eye colorimetric sensing approach by encapsulating a chromoionophoric probe onto a hybrid macro-/meso-pore polymer scaffold for fast and selective sensing of ultra-trace Hg(II). The customized structural/surface properties of the poly(VPy-co-TM) monolith are attained by specific proportions of 2-vinylpyridine (VPy), trimethylolpropane trimethacrylate (TM), and pore-tuning solvents. The interconnected porous network of poly(VPy-co-TM), inherent superior surface area and porosity, is captivating for the homogeneous/voluminous incorporation of probe molecules, i.e., 7-((4-methoxyphenyl)diazenyl)quinoline-8-ol (MPDQ), for the target-specific colorimetric detection. The structural morphology, surface topography, and phase characteristics of the bare poly(VPy-co-TM) monolith and MPDQ@poly(VPy-co-TM) sensor are examined using HR-TEM-SAED (High-Resolution Transmission Electron Microscopy - Selected Area Electron Diffraction), FE-SEM-EDAX (Field Emission Scanning Electron Microscopy - Energy Dispersive X-ray Spectroscopy), XPS (X-ray Photoelectron Spectroscopy), p-XRD (Powder X-Ray Diffraction), FT-IR (Fourier Transform Infrared Spectroscopy), UV-Vis-DRS (Ultraviolet-Visible Diffuse Reflectance Spectroscopy), and BET/BJH (Brunauer-Emmett-Teller / Barrett-Joyner-Halenda) analysis. The distinctive properties of the sensor reveal a constrained geometrical orientation of the MPDQ probe onto the long-range continuous monolithic network of meso-/-macropore template, enabling selective interaction with Hg(II) with peculiar color transfiguration from pale yellow to deep brown. The sensor demonstrates a linear spectral-color alliance in the 0-200 ppb concentration range for Hg(II), with quantification and detection limits of 0.63 and 0.19 ppb. The sensor efficacy is verified using certified contaminated water and tobacco samples, with excellent reusability, reliability, and reproducibility of ≥ 99.23 % (RSD ≤1.89 %) and ≥ 99.19 % (RSD ≤1.94 %) of Hg(II), respectively.

Thiourea Functionalised Receptor for Selective Detection of Mercury Ions and its Application in Serum Sample

A thiourea functionalised fluorescent probe 1-phenyl-3-(pyridin-4-yl)thiourea was synthesized and utilised as a fluorescent turn-on chemosensor for the selective recognition of Hg2+ ion over competitive metal ions including Na+, Mn2+, Li+, Cr2+, Ni2+, Ca2+, Cd2+, Mg2+, K+, Co2+, Cu2+, Zn2+, Al3+ and Fe2+ ions based on the inter-molecular charge transfer (ICT). Intriguingly, the receptor demonstrated unique sensing capabilities for Hg2+ in DMSO: H2O (10:90, v/v). The addition of Hg2+ ions to the sensor resulted in a blue shift in the absorption intensity and also enhancement in fluorescence intensity at 435 nm. Fluorescence emission intensity increased linearly with Hg2+ concentration ranging from 0 to 80 µL. The detection limit and binding constant were determined as 0.134 × 10-6 M and 1.733 × 107 M-1, respectively. The sensing behavior of Hg2+ was further examined using DLS, SEM and FTIR. The probe could detect Hg2+ ions across a wide pH range. Furthermore, the receptor L demonstrated good sensing performance for Hg2+ in bovine serum albumin and actual water samples.

An aggregation-induced emission fluorescent probe for highly sensitive and selective detection and imaging of Hg2+ in living cells

Mercury ions (Hg2+), as one of heavy transition metals (HTM), is a highly toxic metal that is hazardous to human health. Here an aggregation-induced emission (AIE) fluorescent probe is designed for the highly sensitive and selective detection of Hg2+. The probe is engineered with a tetraphenylethene (TPE) derivative as the fluorophore and thiopropionic acid as the site of recognition for Hg2+. Due to the different solubilities of the probe AIE-COOH and its corresponding product after reaction with Hg2+. The probe demonstrates a maximum detection limit of 22 nM and a fast response time of ∼100 s. Simultaneously, AIE-COOH exhibits outstanding detectivity and hypersensitivity for the detection of Hg2+ in aqueous solutions. These characteristics demonstrate that AIE-COOH hold a great potential in environmental, food and biological systems. Moreover, we have also successfully applied it to Hg2+ fluorescence imaging in in living cells.

Carbon nanotube-wastewater treatment nexus: Where are we heading to?

Water treatment is crucial in solving the rising people's appetite for water and global water shortages. Carbon nanotubes (CNTs) have considerable promise for water treatment because of their adjustable and distinctive arbitrary, physical, as well as chemical characteristics. This illustrates the benefits and risks of integrating CNT into the traditional water treatment resource. Due to their outstanding adsorbent ability and chemical and mechanical properties, CNTs have gained global consideration in environmental applications. The desalination and extraction capability of CNT were improved due to chemical or physical modifications in pure CNTs by various functional groups. The CNT-based composites have many benefits, such as antifouling performance, high selectivity, and increased water permeability. Nevertheless, their full-scale implementations are still constrained by their high costs. Functionalized CNTs and their promising nanocomposites to eliminate contaminants are advised for marketing and extensive water/wastewater treatment.

A methionine biomolecule-modified chromenylium-cyanine fluorescent probe for the analysis of Hg2+ in the environment and living cells

The objective of the study is, for the first time, to construct a new near infrared (NIR) fluorophore, spectrophotometric, colorimetric, ratiometric, and turn-on probe (CSME) based on chromenylium cyanine platform decorated with methionine biomolecule to provide an efficient solution for critical shortcoming to be encountered for analysis of hazardous Hg²⁺ in environment and living cell. The CSME structure and its interaction with Hg²⁺ ion were evaluated by NMR, FTIR, MS, UV-Vis and fluorescence methods as well as Density Functional Theory (DFT) calculations. The none fluorescence CSME having spirolactam ring only interacted with Hg²⁺ in aqueous solution including competing ions. This interaction caused the fluorescence CSME with opened spirolactam form which exhibited spectral and colorimetric changes in the NIR region. The probe based on UV-Vis and fluorescence techniques respond in 90 s, has wide linear ranges (for UV-Vis: 6.29 × 10^-8 - 1.86 × 10^-4 M; for fluorescence: 9.49 × 10^-9 - 1.13 × 10^-5 M), and has a lower Limit of Detection (LOD) value (for fluorescence: 4.93 × 10^-9 M, 0.99 ng/mL) than the value predicted by the US Environmental Protection Agency (EPA) organization. Hg²⁺ analysis was performed in drinking and tap water with low Relative Standard Deviation (RSD) values and high recovery. Smartphone and living cell applications were successfully performed for colorimetric sensing Hg²⁺ in real samples and 3T3 cells, respectively.

Progress and opportunities for metal-organic framework composites in electrochemical sensors

Metal-organic framework composites have the advantages of large surface area, high porosity, strong catalytic efficiency and good stability, which provide a great possibility of finding excellent electrode materials for electrochemical sensors. However, MOF composites still face various challenges and difficulties, which limit their development and application. This paper reviews the application of MOF composites in electrochemical sensors, including MOF/carbon composites, MOF/metal nanoparticle composites, MOF/metal oxide composites and MOF/enzyme composites. In addition, the application challenges of MOF composites in electrochemical sensors are summarized. Finally, the application prospect for MOF composites is considered to promote the synthesis of more MOF composites with excellent properties.

Novel Amperometric Mercury-Selective Sensor Based on Organic Chelator Ionophore

A novel amperometric sensor for the direct determination of toxic mercury ions, Hg²⁺, based on the organic chelator ionophore N, N di (2-hydroxy-5-[(4-nitrophenyl)diazenyl]benzaldehyde) benzene-1,2-diamine (NDBD), and multiwalled carbon nanotubes (MWCNT) immobilized on a glassy carbon electrode surface was developed. The parameters influencing sensor performance including the ionophore concentration, the applied potential, and electrolyte pH were optimized. The sensor response to Hg²⁺ was linear between 1-25 µM with a limit of detection of 60 nM. Interferences from other heavy metal ions were evaluated and the sensor showed excellent selectivity towards Hg²⁺. The method was successfully applied to the determination of mercury ions in milk and water samples.

Highly sensitive electrochemical detection of carbendazim residues in water by synergistic enhancement of nitrogen-doped carbon nanohorns and polyethyleneimine modified carbon nanotubes

Carbendazim (CBZ) can protect crops from pathogens, but it is also easy to cause pesticide residues, threatening human health. In our work, an electrochemical sensor based on nitrogen-doped carbon nanohorns (N-CNHs) and polyethyleneimine-modified carbon nanotubes (PEI-CNTs) was developed for the detection of CBZ content in water. The results showed that N-doping provided the CN bonds for CNHs and improved the electrochemical reaction performance of N-CNHs surface. With the participation of PEI, the surface of CNTs was positively charged and contained a large number of NH bonds, which not only promoted the electrostatic assembly of N-CNHs and PEI-CNTs but also was beneficial to further enriching CBZ. After further ultrasound-assisted assembly of N-CNHs and PEI-CNTs, the electron transfer capacity, electrochemical active surface area, and catalytic activity of N-CNHs/PEI-CNTs were significantly improved. The sensor performed a wider linear range (15 nmol/L ~ 70 μmol/L), low detection limit (4 nmol/L) and satisfactory recovery (87.33 % ~ 117.67 %) under the optimal conditions. In addition, the sensor had good anti-interference, reproducibility, and stability. Our work provided a new strategy for quantification of CBZ in environment.

Switching on-off-on colorimetric sensor based on Fe-N/S-C single-atom nanozyme for ultrasensitive and multimodal detection of Hg2

Single-atom nanozymes (SAzymes) as a new class of efficient nanozymes have attracted extensive research interest due to their high catalytic activity and specificity. However, it is challenging to develop a novel nanoenzyme with high activity, good stability and reproducibility. In this paper, the nitrogen and sulfur coordinated Fe-N/S-C SAzymes were synthesized using peanuts shells as carbon, nitrogen and sulfur source. It shows high oxidase-like activities due to the doping of S induced geometric and electronic effects, which is further confirmed by density functional theory calculations. The prepared Fe-N/S-C SAzymes with the remarkable oxidase-mimicking activity could oxidize TMB to blue oxTMB, but the GSH can inhibit the oxidation of TMB resulting in blue fading. However, when Hg²⁺ is added into above system, Hg²⁺-SH complexes are generated attributed to a high affinity between GSH and Hg²⁺, ultimately leading to blue recovery. Based on this phenomenon, we constructed a novel "on-off-on" colorimetric sensor for the simultaneous detection of GSH (off) and Hg²⁺ (on), and the signal is acquired by various modes such as naked eye, UV-Vis spectrometer and smartphone. The colorimetric detection mode based on a smartphone showed a good linear response from 10 to 80 μM for GSH with a detection limit of 3.92 μM, and for Hg²⁺ with a linear range of 1 nM-10 μM and LOD of 0.17 nM, which is more suitable for routine laboratory applications. More importantly, the proposed colorimetric sensor has been successfully applied to the detection of GSH and Hg²⁺ in real samples with good analytical performance. This work not only provides a simple and cost-effective method to detect GSH and Hg²⁺ but also makes a certain contribution to environmental protection.

Development of lab-on-chip biosensor for the detection of toxic heavy metals: A review

Recently, a decrease in water availability and quality has been raised due to rapid industrialization, unsustainable agricultural activities and anthropogenic activities. Heavy metals are considered significant pollutants in the water environment, cause environmental hazards and health effects to humans. For monitoring water contaminants utilized different conventional techniques. Still, they have some drawbacks, such as cost expensive, ecological issues, and processing time, requiring technicians and researchers to operate them effectively. Biosensors have become reasonable devices for screening and identifying environmental contaminants because of their different benefits contrasted with other detecting techniques. This review summarizes the toxic effect of heavy metal and their source, occurrence. A detailed discussion is provided on the heavy metal recognition materials for detecting heavy metals in wastewater. Lab on chip (LOC) is an emerging micro-electrical mechanical system (MEMS) device that intakes liquid and makes it move through the micro-channels, to accomplish fast, cost-effective and profoundly sensitive analysis with significant yield. LOC also provided a discussion on numerous laboratory functions on a single platform. This article attempts to discuss the detection of heavy metals using lab on a chip by suitable recognition materials. Further, the design and fabrication mechanism and their recognition abilities of LOC were also reviewed. The review mainly focuses on the application of LOC biosensors, pros, and cons, and suggests a roadmap towards future development to enhance the practical use in pollutant monitoring.

Wide-field determination of aqueous mercury(II) based on tail-extensible DNA fluorescent probe with tunable dynamic range

Mercury (Hg) is one of the most hazardous pollutants, widely distributed in water, atmosphere, and soil, while the Hg contents from different sources are greatly different. Until now, numerous reported methods are only suitable for a kind of sample because they cannot reconcile sensitivity and linear range. In this work, a tail-extensible DNA fluorescent probe for "turn on" detection of Hg²⁺ with tunable dynamic range and high sensitivity was developed, which was based on segmental hybridization between silver nanoclusters (AgNCs)-covered DNA and different guanine-rich DNAs. By adding adenine-guanine-cytosine (AGC) base repeats as a tail of the guanine-rich DNA, the formation constant of T-Hg²⁺-T complex was effectively modulated within two orders of magnitude. Based on it, a tunable dynamic range from 0.035 to 0.2 pM to 8.0-120.0 pM was achieved by combining four fluorescent probes with different tail lengths. The Hg²⁺contents from different sources were successfully measured. This evidenced the proposed sensor's application toward wide-field detection, which is useful for the direct and objective comparison of results from different sources, and therefore providing a way for solving the shortcomings of reported methods for Hg²⁺ detection. Additionally,this present method is simple, cost-effective and time-saving, ultrasensitive and highly selective, which is favorable for expanding its applications and subsequent mercury pollution control.

Adsorption-improved MoSe2 nanosheet by heteroatom doping and its application for simultaneous detection and removal of mercury (II)

Water pollution arising from heavy metal ions continues to be a major environmental problem, which represents a serious threat to human beings and animals worldwide. New materials that can simultaneously detect and remove these toxic ions are urgently required. Herein, nitrogen and sulfur co-doped molybdenum selenide nanosheets (N, S-MoSe₂) were prepared and found to be fluorescently responsive to mercury (II) with an improved adsorption capacity (208.33 mg g^-1), thereby providing the possibility for the simultaneous detection and removal of mercury (II) in water samples. The great affinity was the result of the complexation of mercury (II) with Se and S atoms in N, S-MoSe₂ as well as the electrostatic adsorption of cation mercury (II) on negatively charged N, S-MoSe₂. Besides good sensitivity and selectivity toward mercury (II), N, S-MoSe₂ displayed a relatively consistent performance under a wide pH range from 3 to 10. The removal efficiency reached 87.5% with fast adsorption kinetics, and N, S-MoSe₂ could be reused after simple treatment. Thus, this work is expected to provide new material for the detection and removal of mercury (II) in an aqueous solution and offer an insight into the interaction between heavy metal ions and inorganic nanomaterials.

Nanomaterials in the environment, human exposure pathway, and health effects: A review

Nanomaterials (NMs), both natural and synthetic, are produced, transformed, and exported into our environment daily. Natural NMs annual flux to the environment is around 97% of the total and is significantly higher than synthetic NMs. However, synthetic NMs are considered to have a detrimental effect on the environment. The extensive usage of synthetic NMs in different fields, including chemical, engineering, electronics, and medicine, makes them susceptible to be discharged into the atmosphere, various water sources, soil, and landfill waste. As ever-larger quantities of NMs end up in our environment and start interacting with the biota, it is crucial to understand their behavior under various environmental conditions, their exposure pathway, and their health effects on human beings. This review paper comprises a large portion of the latest research on NMs and the environment. The article describes the natural and synthetic NMs, covering both incidental and engineered NMs and their behavior in the natural environment. The review includes a brief discussion on sampling strategies and various analytical tools to study NMs in complex environmental matrices. The interaction of NMs in natural environments and their pathway to human exposure has been summarized. The potential of NMs to impact human health has been elaborated. The nanotoxicological effect of NMs based on their inherent properties concerning to human health is also reviewed. The knowledge gaps and future research needs on NMs are reported. The findings in this paper will be a resource for researchers working on NMs all over the world to understand better the challenges associated with NMs in the natural environment and their human health effects.

Development of an Aptamer Based Luminescent Optical Fiber Sensor for the Continuous Monitoring of Hg2+ in Aqueous Media

A fluorescent optical fiber sensor for the detection of mercury (Hg²⁺) ions in aqueous solutions is presented in this work. The sensor was based on a fluorophore-labeled thymine (T)-rich oligodeoxyribonucleotide (ON) sequence that was directly immobilized onto the tip of a tapered optical fiber. In the presence of mercury ions, the formation of T–Hg²⁺-T mismatches quenches the fluorescence emission by the labeled fluorophore, which enables the measurement of Hg²⁺ ions in aqueous solutions. Thus, in contrast to commonly designed sensors, neither a fluorescence quencher nor a complementary ON sequence is required. The sensor presented a response time of 24.8 seconds toward 5 × 10⁻¹² M Hg²⁺. It also showed both good reversibility (higher than the 95.8%) and selectivity: the I₀/I variation was 10 times higher for Hg²⁺ ions than for Mn²⁺ ions. Other contaminants examined (Co²⁺, Ag⁺, Cd²⁺, Ni²⁺, Ca²⁺, Pb²⁺, Mn²⁺, Zn²⁺, Fe³⁺, and Cu²⁺) presented an even lower interference. The limit of detection of the sensor was 4.73 × 10⁻¹³ M Hg²⁺ in buffer solution and 9.03 × 10⁻¹³ M Hg²⁺ in ultrapure water, and was also able to detect 5 × 10⁻¹² M Hg²⁺ in tap water.

Magnetically separable and recyclable bamboo-like carbon nanotube-based FRET assay for sensitive and selective detection of Hg2

The global occurrence of toxic hazards in aquatic ecosystems has aroused concern about the potential impacts on the ecological environment and human health in recent decades. Mercury(II) ions that originate from widespread sources including the mining industry, fossil fuel consumption, and industrial wastes are now well known as a highly toxic pollutant. Despite various detection methods which have been reported to sense Hg²⁺, it still poses a great challenge for us to develop a new effective sensing platform to replenish current fluorescent detection techniques. Here, we report a novel fluorescent biosensor using bamboo-like magnetic carbon nanotubes (BMCNTs) and FAM-labeled T-rich ssDNA for efficient detection of Hg²⁺ in aqueous solution. The proposed biosensor shows a good response toward Hg²⁺ detection over a linear response range of 0.05~1 μM (R² = 0.98) with a detection limit of 20 nM. It also exhibits the capability to discriminate Hg²⁺ ions with negligible response to other metal ions, such as Ca²⁺, Cd²⁺, Cu²⁺, Mg²⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺. Interestingly, the BMCNTs could be separated and recycled easily by using an external magnet, which means a much more cost-effective, easy-to-operate, and eco-friendly method for Hg²⁺ ion detection.

A natural cyanobacterial protein C-phycoerythrin as an Hg2+ selective fluorescent probe in aqueous systems

C-phycoerythrin (CPE) as a natural protein-based fluorescence ‘turn off’ probe for Hg²⁺ in aqueous systems.

Sensor-as-a-Service: Convergence of Sensor Analytic Point Solutions (SNAPS) and Pay-A-Penny-Per-Use (PAPPU) Paradigm as a Catalyst for Democratization of Healthcare in Underserved Communities

In this manuscript, we discuss relevant socioeconomic factors for developing and implementing sensor analytic point solutions (SNAPS) as point-of-care tools to serve impoverished communities. The distinct economic, environmental, cultural, and ethical paradigms that affect economically disadvantaged users add complexity to the process of technology development and deployment beyond the science and engineering issues. We begin by contextualizing the environmental burden of disease in select low-income regions around the world, including environmental hazards at work, home, and the broader community environment, where SNAPS may be helpful in the prevention and mitigation of human exposure to harmful biological vectors and chemical agents. We offer examples of SNAPS designed for economically disadvantaged users, specifically for supporting decision-making in cases of tuberculosis (TB) infection and mercury exposure. We follow-up by discussing the economic challenges that are involved in the phased implementation of diagnostic tools in low-income markets and describe a micropayment-based systems-as-a-service approach (pay-a-penny-per-use-PAPPU), which may be catalytic for the adoption of low-end, low-margin, low-research, and the development SNAPS. Finally, we provide some insights into the social and ethical considerations for the assimilation of SNAPS to improve health outcomes in marginalized communities.

Solid-state polymer membranes for simple, sensitive, and low-cost monitoring of mercury in water

Solid-state Hg(II) selective membranes were produced and assessed by means of X-ray absorption near edge structure in the total reflection X-ray fluorescence (TXRF-XANES) setup and by the energy dispersive X-ray fluorescence (EDXRF) technique. Membranes were functionalized using four promising ligands for mercury complexation, i.e.: i) 4-(2-Pyridylazo) resorcinol (PAR), ii) thiourea, iii) calconcarboxylic acid (CCS), and iv) dithizone. A simple analytical procedure was followed, using miniscule reagent quantities, thus suggesting the process is also cost-effective. TXRF-XANES revealed that mercury complexes with the ligands, and is not simply adsorbed onto the PVC matrix, while the complexation was found to not be affected by the matrix existence. Mercury exhibited an increased oxidation grade and was covalently bound to the ligand functional groups, via a strong chemical bond. EDXRF revealed that the solid-state membranes can be used for mercury speciation and trace analysis from environmentally relevant matrices, such as tap water. The membranes could be a promising alternative to polymer inclusion membranes (PIMs), due to their simple configuration and high Hg (II) selectivity in aqueous media, but more research is needed. PAR appears to be the most promising ligand, followed by dithizone and thiourea. CCS had a minuscule preconcentration efficiency since it was preferably bound with Cu in tap water, indicating limited usefulness for mercury preconcentration. However, results suggest that, depending on the ligand, the solid-state membranes could be also possibly used for multi-elemental heavy metals analysis in water.

Functionalized Electrospun Nanofibers as Colorimetric Sensory Probe for Mercury Detection: A Review

Mercury is considered the most hazardous pollutant of aquatic resources; it exerts numerous adverse effects on environmental and human health. To date, significant progress has been made in employing a variety of nanomaterials for the colorimetric detection of mercury ions. Electrospun nanofibers exhibit several beneficial features, including a large surface area, porous nature, and easy functionalization; thus, providing several opportunities to encapsulate a variety of functional materials for sensing applications with enhanced sensitivity and selectivity, and a fast response. In this review, several examples of electrospun nanofiber-based sensing platforms devised by utilizing the two foremost approaches, namely, direct incorporation and surface decoration envisioned for detection of mercury ions are provided. We believe these examples provide sufficient evidence for the potential use and progress of electrospun nanofibers toward colorimetric sensing of mercury ions. Furthermore, the summary of the review is focused on providing an insight into the future directions of designing electrospun nanofiber-based, metal ion colorimetric sensors for practical applications.

A cytosine-rich hairpin DNA loaded with silver nanoclusters as a fluorescent probe for uranium(IV) and mercury(II) ions

A dually responsive fluorescent probe for determination of U(IV) and mercury(II) ions was synthesized. The probe consists of a cytosine-rich hairpin DNA loaded with silver nanoclusters (DNA-AgNCs). The fluorescence of the AgNCs is found to be quenched by UO₂(II) at pH 5.0 and Hg(II) at pH 7.0 due to combined static and dynamic quenching. Under the optimal conditions, the green fluorescence of the DNA-AgNCs, best measured at excitation/emission wavelengths of 420/525 nm, decreases in the 4.0 to 75 pM UO₂(II) concentration range, and in the 0.3 to 8.0 nM Hg(II) concentration range. The respective detection limits are as low as 1.8 pM and 0.1 nM. The method was successfully applied to the determination of UO₂(II) and Hg(II) in (spiked) pond and taps waters and in soil extracts. Graphical abstract A label-free DNA was designed to synthesize green-fluorescent silver nanoclusters (AgNCs) and used for rapid dual detection of uranyl ions (UO₂(II)) at pH 5.0 and of mercury ions (Hg(II)) at pH 7.0 in environmental samples.

Colorimetric method for glucose detection with enhanced signal intensity using ZnFe2O4-carbon nanotube-glucose oxidase composite material

In this paper, a composite material comprised of ZnFe2O4 nanomaterial, carbon nanotubes (CNT) and glucose oxidase (GOD) was synthesized and used for glucose detection. ZnFe2O4-CNT was formed by a one-step solvothermal approach using acid-treated CNT as precursor, then GOD was linked to it by coupling reaction between -NH2 and -COOH. After addition of glucose, which is oxidized by GOD, the intermediate product (H2O2) further oxidizes the 3,3',5,5'-tetramethylbenzidine (TMB) substrate and forms a blue product. This process was accelerated in the presence of peroxidase-mimic ZnFe2O4 nanomaterial and the detected signal intensity was correspondingly enhanced. The linear detection range of glucose was 0.8 to 250 μM, with a limit of detection of 0.58 μM. This may originate from (1) the limited diffusion of intermediate species, which resulted in enhanced local concentrations of reaction compounds; (2) enhanced electron transmission among CNT, GOD and ZnFe2O4; (3) the synergistic enhancement of catalytic activity of ZnFe2O4 compared with other metal oxides; (4) the high loading capacity of ZnFe2O4-CNT for GOD molecules, because of its high surface-to-volume ratio. Meanwhile, this method has reasonable selectivity, stability and reusability and can be used for real serum detection, which may be useful for the development of sensitive biosensors.

Helical Assembly of Flavin Mononucleotides on Carbon Nanotubes as Multimodal Near-IR Hg(II)-Selective Probes

The development of novel methods to detect mercury is of paramount importance owing to the impact of this metal on human health and the environment. We observed that flavin mononucleotide (FMN) and its helical assembly with a single-walled carbon nanotube (SWNT) selectively bind Hg²⁺ arising from HgCl₂ and MeHgCl. Absorption spectroscopic studies show that FMN preferentially forms a 2:1 rather than a 1:1 complex with Hg²⁺ at high FMN concentrations. On the basis of the analogy to the thymine-Hg-thymine complex, it is proposed that the 2:1 complex between FMN and Hg²⁺ comprises a Hg-bridged pair of FMN groups, regardless of the presence of SWNT. Upon addition of as little as a few hundred nanomoles of Hg²⁺, both FMN and FMN-SWNT exhibit absorption and photoluminescence (PL) changes. Moreover, FMN-SWNT displays simultaneous multiple sigmoidal changes in PL of SWNT tubes having different chiral vectors. Assessment of binding affinities using the Hill equation suggests that 2:1 and 1:1 complexes form between Hg²⁺ and FMN groups on the FMN-SWNT. Theoretical calculations indicate that optical changes of the FMN-SWNT originate from Hg-mediated conformational changes occurring on the helical array of FMN on the SWNT. High-resolution transmission electron microscopy revealed that the presence of Hg²⁺ in complexes with the FMN-SWNT enables visualization of helical periodic undulation of FMN groups along SWNT without the need for staining. Circular dichroism (CD) study revealed that FMN-SWNT whose CD signal mainly originates from FMN decreases dichroic bands upon the addition of Hg²⁺ owing to the formation of a centrosymmetric FMN-Hg-FMN triad on SWNT. The binding mode specificity and multimodal changes observed in response to Hg²⁺ ions suggest that systems based on FMN-SWNT can serve as in vivo NIR beacons for the detection of various mercury derivatives.

Progress in rapid optical assays for heavy metal ions based on the use of nanoparticles and receptor molecules

This review (with 230 refs.) covers recent progress in rapid optical assays for heavy metals (primarily lead and mercury as the most relevant) based on the use of nanoparticles and receptor molecules. An introduction surveys the importance, regulatory demands (such as maximum permissible concentrations) and potential and limitations of various existing methods. This is followed by a general discussion on the use of nanoparticles in optical assays of heavy metals (including properties, basic mechanisms of signal generation). The next sections cover methods for the functionalization of nanoparticles with (a) sulfur-containing compounds (used for modification of nanoparticles or added to the reaction medium), (b) nitrogen-containing compounds (such as amino acids, polypeptides, and heterocyclic molecules), and (c) oxygen-containing species (such as hydroxy and carbonyl compounds). This is continued by a specific description of specific assays based on the use of aptamers as receptors, on the use of deoxyribozymes as synthetic reaction catalysts, of G-quadruplex aptamers, of aptamers in logic gate-type of assays of linear (unstructured) aptamers ("hairpins"), and on the use of aptamers in lateral flow assays. A next section covers assays based on the employment of antibodies as receptors (used in the immunoassay development). The properties of various nanoparticles and their applicability in optical assays are also discussed in some detail. Final sections discuss the selectivity of assays, potential interferences by other cations, methods for their elimination, and also matrix effects and approaches for sample pretreatment. A concluding section discusses current challenges and future trends. Analysis based on enzyme inhibition assay is not treated here but enzyme-like action of some receptor molecules such as DNAzymes is discussed. Graphical abstract Schematic presentation of main principles of application of various nanoparticles with receptor molecules (S-, N-, O-containing, heterocyclic compounds, proteins, antibody, aptamers) for heavy metals ions detection. The included methods cover optical assays with description of mechanisms of interactions and signal generation.

An Overview of the Recent Progress in the Synthesis and Applications of Carbon Nanotubes

Carbon nanotubes (CNTs) are known as nano-architectured allotropes of carbon, having graphene sheets that are wrapped forming a cylindrical shape. Rolling of graphene sheets in different ways makes CNTs either metals or narrow-band semiconductors. Over the years, researchers have devoted much attention to understanding the intriguing properties CNTs. They exhibit some unusual properties like a high degree of stiffness, a large length-to-diameter ratio, and exceptional resilience, and for this reason, they are used in a variety of applications. These properties can be manipulated by controlling the diameter, chirality, wall nature, and length of CNTs which are in turn, synthesis procedure-dependent. In this review article, various synthesis methods for the production of CNTs are thoroughly elaborated. Several characterization methods are also described in the paper. The applications of CNTs in various technologically important fields are discussed in detail. Finally, future prospects of CNTs are outlined in view of their commercial applications.

Mix-&-Read Determination of Mercury(II) at Trace Levels with Hybrid Mesoporous Silica Materials Incorporating Fluorescent Probes by a Simple Mix-&-Load Technique

The synthesis, characterization, and application of mesoporous materials containing boron-dipyrromethene (BODIPY) moieties that allow the sensitive and selective detection of HgII in aqueous environments by fluorescence enhancement is reported. For this purpose, BODIPY dye I containing a thia-aza crown ether receptor as the fluorescent probe for the detection of HgII in aqueous environments is encapsulated into mesoporous materials to avoid self-quenching or aggregation in water. Determination of HgII is accomplished within a few seconds with high selectivity and sensitivity, reaching a limit of detection of 12 ppt. The determination of trace amounts of HgII in natural waters and in fish extracts is demonstrated by using our sensing material. The incorporation of the material into several μ-PAD strips yields a portable, cheap, quick, and easy-to-handle tool for trace HgII analysis in water.

Thiosemicarbazone@Gold nanoparticle hybrid as selective SERS substrate for Hg2+ ions

The Raman spectral profile of p-methylcarbohydrazonethioamide (MCHT) is completely changed due to strong SERS effects upon bonding onto gold nanoparticles surface, but some vibrational modes are further enhanced in the presence of Hg(II) ions. The lack of SERS response for most common metal ions indicates that the coordinating groups are interacting with the gold nanoparticles surface and not available for binding metal ions in solution, except for mercury ions. The selective enhancement of some vibrational modes is consistent with significant conformational changes upon binding of Hg(II) ion onto the AuNP@MCHT hybrid, as confirmed by TEM/EDS measurements, demonstrating its potentiality as a highly selective and sensitive SERS substrate.

Electrochemical DNA Sensor Based on Carbon Black-Poly(Neutral Red) Composite for Detection of Oxidative DNA Damage

Voltammetric DNA sensor has been proposed on the platform of glassy carbon electrode covered with carbon black with adsorbed pillar[5]arene molecules. Electropolymerization of Neutral Red performed in the presence of native or oxidatively damaged DNA resulted in formation of hybrid material which activity depended on the DNA conditions. The assembling of the surface layer was confirmed by scanning electron microscopy and electrochemical impedance spectroscopy. The influence of DNA and pillar[5]arene on redox activity of polymeric dye was investigated and a significant increase of the peak currents was found for DNA damaged by reactive oxygen species generated by Cu²⁺/H₂O₂ mixture. Pillar[5]arene improves the electron exchange conditions and increases the response and its reproducibility. The applicability of the DNA sensor developed was shown on the example of ascorbic acid as antioxidant. It decreases the current in the concentration range from 1.0 μM to 1.0 mM. The possibility to detect antioxidant activity was qualitatively confirmed by testing tera infusion. The DNA sensor developed can find application in testing of carcinogenic species and searching for new antitumor drugs.

The preparation of a flexible AuNP modified carbon cloth electrode and its application in electrochemical detection of Hg(ii) by continuous flow in environmental water

In this article, a carbon cloth composite electrode modified with gold nanoparticles (AuNPs) was prepared by a facile in situ electrodeposition method and applied to the detection of mercury ions in water. With the optimized electrochemical detection conditions and methods, the limit of detection (LOD) was 0.6 μg L^-1 with the linearity ranging from 2 to 200 μg L^-1 by the SWSV detection method, and the electrode showed good repeatability after many cycles. Based on this detection method, a continuous flow electrochemical detection system was constructed and applied to the detection of Hg ions in environmental water samples. The standard addition experimental results of two real water samples with an addition level of 10 and 50 μg L^-1 showed that the recoveries were between 92.4% and 108.9% with RSDs from 2.01% to 3.22%. These results showed the same performance as that of the ZAAS mercury detection method (recovery: 94-102.4%, RSD 2.09-5.4%). Compared with other electrode materials, a shorter detection time, a wider linear range and high stability with a similar LOD can be achieved by a continuous flow detection method by using the composite electrode. The established continuous flow electrochemical detection system would have promising application in online and real-time detection of heavy metals in environmental water.

Mix-&-Read Determination of Mercury(II) at Trace Levels with Hybrid Mesoporous Silica Materials Incorporating Fluorescent Probes by a Simple Mix-&-Load Technique

The synthesis, characterization, and application of mesoporous materials containing boron-dipyrromethene (BODIPY) moieties that allow the sensitive and selective detection of HgII in aqueous environments by fluorescence enhancement is reported. For this purpose, BODIPY dye I containing a thia-aza crown ether receptor as the fluorescent probe for the detection of HgII in aqueous environments is encapsulated into mesoporous materials to avoid self-quenching or aggregation in water. Determination of HgII is accomplished within a few seconds with high selectivity and sensitivity, reaching a limit of detection of 12 ppt. The determination of trace amounts of HgII in natural waters and in fish extracts is demonstrated by using our sensing material. The incorporation of the material into several μ-PAD strips yields a portable, cheap, quick, and easy-to-handle tool for trace HgII analysis in water.

Highly fluorescent carbon quantum dots as nanoprobes for sensitive and selective determination of mercury (II) in surface waters

A novel carbon quantum dots (CQDs) was successfully prepared through one-step green hydrothermal method using polyacrylamide as carbon source. The prepared CQDs were characterized using TEM, XRD, XPS, FT-IR, UV-Vis, and fluorescence spectroscopy. The CQDs was demonstrated as nanoprobes for mercury ion detection, moreover, it demonstrated excitation-dependent and superior stability in acidic and alkaline media. Besides, the probe exhibited a good linearity range (0.25-50μM) and a low detection limit (13.48nM). These attractive properties indicated that this novel CQDs can adapt to a variety of complex pH environment, which had extensive prospect and promising application for detection of mercury ions in complex water samples.