Effects of charge and surface defects of multi-walled carbon nanotubes on the disruption of model cell membranes

Magnetic carbon nanotubes modified with proteins and hydrophilic monomers: Cytocompatibility, in-vitro toxicity assays and permeation across biological interfaces

Carbon nanotubes are promising materials for biomedical applications like delivery systems and tissue scaffolds. In this paper, magnetic carbon nanotubes (M-CNTs) covered with bovine serum albumin (M-CNTs-BSA) or functionalized with hydrophilic monomers (M-CNTs-HL) were synthesized, characterized, and evaluated concerning their interaction with Caco-2 cells. There is no comparison between these two types of functionalization, and this study aimed to verify their influence on the material's interaction with the cells. Different concentrations of the nanotubes were applied to investigate cytotoxicity, cell metabolism, oxidative stress, apoptosis, and capability to cross biomimetic barriers. The materials showed cytocompatibility up to 100 μg mL-1 and a hemolysis rate below 2 %. Nanotubes' suspensions were allowed to permeate Caco-2 monolayers for up to 8 h under the effect of the magnetic field. Magnetic nanoparticles associated with the nanotubes allowed estimation of permeation through the monolayers, with values ranging from 0.50 to 7.19 and 0.27 to 9.30 × 10-3 μg (equivalent to 0.43 to 6.22 and 0.23 to 9.54 × 10-2 % of the initially estimated mass of magnetic nanoparticles) for cells exposed and non-exposed to the magnets, respectively. Together, these results support that the developed materials are promising for applications in biomedical and biotechnological fields.

Influence of silicon nanocone on cell membrane self-sealing capabilities for targeted drug delivery-Computer simulation study

Efficient and non-invasive techniques of cargo delivery to biological cells are the focus of biomedical research because of their great potential importance for targeted drug therapy. Therefore, much effort is being made to study the characteristics of using nano-based biocompatible materials as systems that can facilitate this task while ensuring appropriate self-sealing of the cell membrane. Here, we study the effects of indentation and withdrawal of nanocone on phospholipid membrane by applying steered molecular dynamics (SMD) technique. Our results show that the withdrawal process directly depends on the initial position of the nanocone. The average force and work are considerably more significant in case of the withdrawal starting from a larger depth. This result is attributed to stronger hydrophobic interactions between the nanocone and lipid tails of the membrane molecules. Furthermore, when the indenter was started from the lower initial depth, the number of lipids removed from the membrane was several times smaller than the deeper indentation. The choice of the least invasive method for nanostructure-assisted drug delivery is crucial for possible applications in medicine. Therefore, the results presented in this work might be helpful in efficient and safe drug delivery with nanomaterials.

Damage Effect of Amorphous Carbon Black Nanoparticle Aggregates on Model Phospholipid Membranes: Surface Charge, Exposure Concentration and Time Dependence

Commercial nano-scale carbon blacks (CB) are being harnessed widely and may impose potentially hazardous effects because of their unique properties, especially if they have been modified to grow reactive functional groups on their surface. Cytotoxicity of CB has been well studied but the membrane damage mechanisms and role of surface modification are still open to debate. Negatively and positively charged giant unilamellar vesicles (GUVs) were prepared using three lipids as model cell membranes to examine the mechanistic damage of CB and MCB (modified by acidic potassium permanganate) aggregates. Optical images showed that both anionic CB and MCB disrupted the positively charged but not the negatively charged GUVs. This disruption deteriorated with the rise and extension of exposure concentration and time. Lipids extraction caused by CBNs (CB and MCB together are called CBNs) was found. MCB caused more severe disruption than CB. MCB was enveloped into vesicles through an endocytosis-like process at 120 mg/L. MCB mediated the gelation of GUVs, perhaps through C-O-P bonding bridges. The lower hydrodynamic diameter and more negative charges may have been responsible for the distinction effect of MCB over CB. The adhesion and bonding of CBNs to the membrane were favored by electrostatic interaction and the practical application of CBNs warrants more attention.

Nanoscale biophysical properties of small extracellular vesicles from senescent cells using atomic force microscopy, surface potential microscopy, and Raman spectroscopy

Cells secrete extracellular vesicles (EVs) carrying cell-of-origin markers to communicate with surrounding cells. EVs regulate physiological processes ranging from intercellular signaling to waste management. However, when senescent cells (SnCs) secrete EVs, the EVs, which are newly regarded as senescence-associated secretory phenotype (SASP) factors, can evoke inflammation, senescence induction, and metabolic disorders in neighboring cells. Unlike other soluble SASP factors, the biophysical properties of EVs, including small EVs (sEVs), derived from SnCs have not yet been investigated. In this study, sEVs were extracted from a human IMR90 lung fibroblast in vitro senescence model. Their biomechanical properties were mapped using atomic force microscopy-based quantitative nanomechanical techniques, surface potential microscopy, and Raman spectroscopy. The surfaces of sEVs derived from SnCs are slightly stiffer but their cores are softer than those of sEVs secreted from non-senescent cells (non-SnCs). This inversely proportional relationship between deformation and stiffness, attributed to a decrease in the concentration of genetic and protein materials inside the vesicles and the adsorption of positively charged SASP factors onto the vesicle surfaces, respectively, was found to be a peculiar characteristic of SnC-derived sEVs. Our results demonstrate that the biomechanical properties of SnC-derived sEVs differ from those of non-SnC-derived sEVs and provide insight into the mechanisms underlying their formation and composition.

Biomimetic Nanochannels: From Fabrication Principles to Theoretical Insights

Biological nanochannels which can regulate ionic transport across cell membranes intelligently play a significant role in physiological functions. Inspired by these nanochannels, numerous artificial nanochannels have been developed during recent years. The exploration of smart solid-state nanochannels can lay a solid foundation, not only for fundamental studies of biological systems but also practical applications in various fields. The basic fabrication principles, functional materials, and diverse applications based on artificial nanochannels are summarized in this review. In addition, theoretical insights into transport mechanisms and structure-function relationships are discussed. Meanwhile, it is believed that improvements will be made via computer-guided strategy in designing more efficient devices with upgrading accuracy. Finally, some remaining challenges and perspectives for developments in both novel conceptions and technology of this inspiring research field are stated.

Photocatalytic nanoparticles - From membrane interactions to antimicrobial and antiviral effects

As a result of increasing resistance among pathogens against antibiotics and anti-viral therapeutics, nanomaterials are attracting current interest as antimicrobial agents. Such materials offer triggered functionalities to combat challenging infections, based on either direct membrane action, effects of released ions, thermal shock induced by either light or magnetic fields, or oxidative photocatalysis. In the present overview, we focus on photocatalytic antimicrobial effects, in which light exposure triggers generation of reactive oxygen species. These, in turn, cause oxidative damage to key components in bacteria and viruses, including lipid membranes, lipopolysaccharides, proteins, and DNA/RNA. While an increasing body of studies demonstrate that potent antimicrobial effects can be achieved by photocatalytic nanomaterials, understanding of the mechanistic foundation underlying such effects is still in its infancy. Addressing this, we here provide an overview of the current understanding of the interaction of photocatalytic nanomaterials with pathogen membranes and membrane components, and how this translates into antibacterial and antiviral effects.

Antipathogenic properties and applications of low-dimensional materials

A major health concern of the 21st century is the rise of multi-drug resistant pathogenic microbial species. Recent technological advancements have led to considerable opportunities for low-dimensional materials (LDMs) as potential next-generation antimicrobials. LDMs have demonstrated antimicrobial behaviour towards a variety of pathogenic bacterial and fungal cells, due to their unique physicochemical properties. This review provides a critical assessment of current LDMs that have exhibited antimicrobial behaviour and their mechanism of action. Future design considerations and constraints in deploying LDMs for antimicrobial applications are discussed. It is envisioned that this review will guide future design parameters for LDM-based antimicrobial applications.

Interaction of graphene oxide with artificial cell membranes: Role of anionic phospholipid and cholesterol in nanoparticle attachment and membrane disruption

A mechanistic understanding of the interaction of graphene oxide (GO) with cell membranes is critical for predicting the biological effects of GO following accidental exposure and biomedical applications. We herein used a quartz crystal microbalance with dissipation monitoring (QCM-D) to probe the interaction of GO with model cell membranes modified with anionic lipids or cholesterol under biologically relevant conditions. The attachment efficiency of GO on supported lipid bilayers (SLBs) decreased with increasing anionic lipid content and was unchanged with varying cholesterol content. In addition, the incorporation of anionic lipids to the SLBs rendered the attachment of GO partially reversible upon a decrease in solution ionic strength. These results demonstrate the critical role of lipid bilayer surface charge in controlling GO attachment and release. We also employed the fluorescent dye leakage technique to quantify the role of anionic lipids and cholesterol in vesicle disruption caused by GO. Notably, we observed a linear correlation between the amount of dye leakage from the vesicles and the attachment efficiencies of GO on the SLBs, confirming that membrane disruption is preceded by GO attachment. This study highlights the non-negligible role of lipid bilayer composition in controlling the physicochemical interactions between cell membranes and GO.

Carbon Nanotubes: Smart Drug/Gene Delivery Carriers

The unique properties of carbon nanotubes (CNTs) (such as their high surface to volume ratios, enhanced conductivity and strength, biocompatibility, ease of functionalization, optical properties, etc.) have led to their consideration to serve as novel drug and gene delivery carriers. CNTs are effectively taken up by many different cell types through several mechanisms. CNTs have acted as carriers of anticancer molecules (including docetaxel (DTX), doxorubicin (DOX), methotrexate (MTX), paclitaxel (PTX), and gemcitabine (GEM)), anti-inflammatory drugs, osteogenic dexamethasone (DEX) steroids, etc. In addition, the unique optical properties of CNTs have led to their use in a number of platforms for improved photo-therapy. Further, the easy surface functionalization of CNTs has prompted their use to deliver different genes, such as plasmid DNA (PDNA), micro-RNA (miRNA), and small interfering RNA (siRNA) as gene delivery vectors for various diseases such as cancers. However, despite all of these promises, the most important continuous concerns raised by scientists reside in CNT nanotoxicology and the environmental effects of CNTs, mostly because of their non-biodegradable state. Despite a lack of widespread FDA approval, CNTs have been studied for decades and plenty of in vivo and in vitro reports have been published, which are reviewed here. Lastly, this review covers the future research necessary for the field of CNT medicine to grow even further.

Combined toxicity of functionalized nano-carbon black and cadmium on Eisenia fetida coelomocytes: The role of adsorption

Little is known about the potential threats of functionalized nano-carbon black (FNCB) combined with cadmium (Cd) to soil invertebrates. In this study, immunocompetent coelomocytes from Eisenia fetida are harnessed, and the joint cytotoxicity types of FNCB and Cd co-exposure are analyzed. The extracellular interaction mechanisms of FNCB and Cd were completely explored using adsorption kinetics and thermodynamics accompanied by isotherm batch experiments and Fourier infrared spectroscopy. The results indicated that functional amorphous carbon nanoparticles up to certain dose may injure cells due to their surface oxygen-containing groups. The MIXTOX model and the combination index suggested that the combined action of FNCB and Cd exhibited antagonism at the low dose/effect-level and synergism at the high dose/effect-level. FNCB decreased the intracellular free Cd²⁺ content at a low mixture dose, while it increased it at a high mixture dose. The adsorption of Cd on FNCB followed pseudo-second-kinetics and the Langmuir isotherm, hence better indicating a chemisorption, which was also supported by the activation energy (E_a = 36.6 kJ/mol), enthalpy change (ΔH = -98.4 kJ/mol), and functional group changes. Coordination binding should be responsible for the subsequent interaction of toxicity.

Carbon nanotubes and their polymeric composites: the applications in tissue engineering

Carbon nanotubes (CNTs), with unique graphitic structure, superior mechanical, electrical, optical and biological properties, has attracted more and more interests in biomedical applications, including gene/drug delivery, bioimaging, biosensor and tissue engineering. In this review, we focus on the role of CNTs and their polymeric composites in tissue engineering applications, with emphasis on their usages in the nerve, cardiac and bone tissue regenerations. The intrinsic natures of CNTs including their physical and chemical properties are first introduced, explaining the structure effects on CNTs electrical conductivity and various functionalization of CNTs to improve their hydrophobic characteristics. Biosafety issues of CNTs are also discussed in detail including the potential reasons to induce the toxicity and their potential strategies to minimise the toxicity effects. Several processing strategies including solution-based processing, polymerization, melt-based processing and grafting methods are presented to show the 2D/3D construct formations using the polymeric composite containing CNTs. For the sake of improving mechanical, electrical and biological properties and minimising the potential toxicity effects, recent advances using polymer/CNT composite the tissue engineering applications are displayed and they are mainly used in the neural tissue (to improve electrical conductivity and biological properties), cardiac tissue (to improve electrical, elastic properties and biological properties) and bone tissue (to improve mechanical properties and biological properties). Current limitations of CNTs in the tissue engineering are discussed and the corresponded future prospective are also provided. Overall, this review indicates that CNTs are promising “next-generation” materials for future biomedical applications.

The Importance of Evaluating the Lot-to-Lot Batch Consistency of Commercial Multi-Walled Carbon Nanotube Products

The biological response of multi-walled carbon nanotubes (MWNTs) is related to their physicochemical properties and a thorough MWNT characterization should accompany an assessment of their biological activity, including their potential toxicity. Beyond characterizing the physicochemical properties of MWNTs from different sources or manufacturers, it is also important to characterize different production lots of the same MWNT product from the same vendor (i.e., lot-to-lot batch consistency). Herein, we present a comprehensive physicochemical characterization of two lots of commercial pristine MWNTs (pMWNTs) and carboxylated MWNTs (cMWNTs) used to study the response of mammalian macrophages to MWNTs. There were many similarities between the physicochemical properties of the two lots of cMWNTs and neither significantly diminished the 24-h proliferation of RAW 264.7 macrophages up to the highest concentration tested (200 μg cMWNTs/mL). Conversely, several physicochemical properties of the two lots of pMWNTs were different; notably, the newer lot of pMWNTs displayed less oxidative stability, a higher defect density, and a smaller amount of surface oxygen species relative to the original lot. Furthermore, a 72-h half maximal inhibitory concentration (IC-50) of ~90 µg pMWNTs/mL was determined for RAW 264.7 cells with the new lot of pMWNTs. These results demonstrate that subtle physicochemical differences can lead to significantly dissimilar cellular responses, and that production-lot consistency must be considered when assessing the toxicity of MWNTs.

Graphene nanosheets damage the lysosomal and mitochondrial membranes and induce the apoptosis of RBL-2H3 cells

The induced membrane damage is a key mechanism for the cytotoxicity of graphene nanosheets (GNSs). In this research, the physical interaction of GNSs on model membranes was investigated using artificial membranes and plasma membrane vesicles. The effects of the GNSs on plasma membrane, lysosomal and mitochondrial membranes were investigated using rat basophilic leukemia (RBL2H3) cells via lactate dehydrogenase (LDH) assay, acridine orange staining and JC-1 probe, respectively. The physical interaction with model membranes was dominated by electrostatic forces, and the adhered GNSs disrupted the membrane. The degree of physical membrane disruption was quantified by the quartz crystal microbalance with dissipation (QCM-D), confirming the serious membrane disruption. The internalized GNSs were mainly distributed in the lysosomes. They caused plasma membrane leakage, increased the lysosomal membrane permeability (LMP), and depolarized the mitochondrial membrane potential (MMP). The increased cellular levels of reactive oxygen species (ROS) were also detected after GNS exposure. The combination of physical interaction and the excess ROS production damaged the plasma and organelle membranes in living RBL-2H3 cells. The lysosomal and mitochondrial dysfunction, and the oxidative stress further induced cell apoptosis. Specially, the exposure to 25 mg/L GNSs caused severest cell mortality, plasma membrane damage, ROS generation, MMP depolarization and apoptosis. The research findings provide more comprehensive information on the graphene-induced plasma and organelle membrane damage, which is important to understand and predict the cytotoxicity of carbon-based nanomaterials.

A closer look into the physical interactions between lipid membranes and layered double hydroxide nanoparticles

Layered double hydroxide nanoparticles (LDH-NPs) constitute promising nanocarriers for drug and gene delivery. Although their cell internalization has been studied, the interaction between LDH-NPs and biological membrane models, such as giant unilamellar vesicles (GUVs), remains unexplored. These vesicles are widely-used membrane models that allow minimizing the complexity and uncertainty associated with biological systems to study the physical interactions in the absence of cell metabolism effects. With such an approach the physicochemical properties of the membrane can be differentiated from the biological functionalities involved in cell internalization and the membrane-mediated internalization can be directly understood. In this work, we describe for the first time the interaction of LDH-NPs with freestanding negatively charged POPC:POPS GUVs by fluorescence microscopy. The experiments were performed with fluorescein labeled LDH-NPs of about 100 nm together with different fluorophores in order to evaluate the NPs interactions with the vesicles as well as their impact on the membrane morphology and permeability. Positively charged LDH-NPs are electrostatically accumulated at the GUVs membrane, altering its lateral phospholipid distribution and increasing the stiffness and permeability of the membrane. The adsorption of albumin (LDH@ALB) or polyacrylic acid (LDH@PA) passivates the surface of LDH-NPs eliminating long-range electrostatic attraction. The absence of membrane-mediated internalization of either LDH@ALB or LDH@PA, represents an advantage in the use of LDH-NPs as drug or nucleic acids nanocarriers, because suitable functionalization will allow an optimal cell targeting.

Pleural translocation and lesions by pulmonary exposed multi-walled carbon nanotubes

Carbon nanotubes (CNTs) are recently developed tubular nanomaterials, with diameters ranging from a few nanometers to tens of nanometers, and the length reaching up to several micrometers. They can be either single-walled carbon nanotubes (SWCNTs) or multi-walled carbon nanotubes (MWCNTs). Due to their nano-scaled structure, CNTs have a unique set of mechanical, electrical, and chemical properties that make them useful in information technologies, optoelectronics, energy technologies, material sciences, medical technologies, and other fields. However, with the wide application and increasing production of CNTs, their potential risks have led to concerns regarding their impact on environment and health. The shape of some types of CNTs is similar to asbestos fibers, which suggests that these CNTs may cause characteristic pleural diseases similar to those found in asbestos-exposed humans, such as pleural plaques and malignant mesothelioma. Experimental data indicate that CNTs can induce lung and pleural lesions, inflammation, pleural fibrosis, lung tumors, and malignant mesothelioma upon inhalation in the experimental animals. In this review, we focus on the potential of MWCNTs to induce diseases similar to those by asbestos, molecular and cellular mechanisms associated with these diseases, and we discuss a method for evaluating the pleural toxicity of MWCNTs.

Size-dependent interaction of hydrophilic/hydrophobic ligand functionalized cationic and anionic nanoparticles with lipid bilayers

We study the nature of nanoparticle (NPs)-membrane interaction as a function of nanoparticle size for different functionalization using molecular dynamics simulation. Zinc sulphide quantum dots of size, 2 nm and 4 nm are used as model NPs, and DLPC and DPPC lipid bilayers are used as model membranes. We use coarse-grained polarizable MARTINI model (MPW) to simulate the NPs and lipid bilayers. Our simulation results show that uncharged bare NPs penetrate the lipid bilayers and embed themselves within the hydrophobic core of the bilayer both in the gel and fluid phases. NPs of size 4 nm are shown to disrupt the bilayer. The bilayer recovers from the damages caused by smaller NPs of size 2 nm. In case of either purely hydrophilic or hybrid (with hydrophilic/hydrophobic ratio of 2:1) ligand-functionalized NPs of smaller size (shell size 2 nm), only cationic NPs bind to the bilayer. However, for larger NPs with a shell size of 4 nm, both anionic and cationic hybrid functionalized NPs bind to the bilayer. The performance of standard Martini (SM) force field for the charged NP/bilayer systems has also been tested and compared with the results obtained using MPW model. Although the overall trend that the cationic NPs interact strongly with the bilayers than their anionic counterparts has been captured correctly using SM, the adsorption behaviour of the functionalized NPs differ significantly in the SM force field. The interaction of anionic NPs with both fluid and gel bilayers has been observed to be least accurately represented in the SM force field.

Effects of carbon nanotubes on biodegradation of pollutants: Positive or negative?

Recently, a large quantity of carbon nanotubes (CNTs) enters the environment due to the increasing production and applications. More and more researches are focused on the fate and possible ecological risks of CNTs. Some literatures summarized the effects of CNTs on the chemical behavior and fate of pollutants. However, little reviewed the effects of CNTs on the biodegradation of pollutants. In general, the effects of CNTs on the biodegradation of pollutants and the related mechanisms were summarized in this review. CNTs have positive or negative effects on the biodegradation of contaminants by affecting the functional microorganisms, enzymes and the bioavailability of pollutants. CNTs may affect the microbial growth, activity, biomass, community composition, diversity and the activity of enzymes. The decrease of the bioavailability of pollutants due to the sorption on CNTs also causes the reduction of the biodegradation of contaminants. In addition, the roles of CNTs are controlled by multiple mechanisms, which are divided into three aspects i.e., properties of CNTs, environment condition, and microorganisms themself. The better understanding of the fate of CNTs and their impacts on the biochemical process in the environment is conducive to determine the release of CNTs into the environment.

Discerning the mechanism of the multiwalled carbon nanotubes effect on root cell water and nutrient transport

Multiwalled carbon nanotubes (MWCNTs) are tubular carbon structures that are able to enter cells through holes in the plasma membrane and produce changes in gene expression. In this work, we compared the functionality of carbon nanotubes with the electroporation that perforates membranes, in Brassica oleracea var. Italica (broccoli) root protoplasts. For this, we combined those treatments with control conditions and abiotic stress (salinity) in order to elucidate if the response is related to conditions optimal for the plant. The measurement of the osmotic water permeability (Pf), mineral concentrations and expression levels of aquaporins (PIP1s and PIP2s) revealed that the physiological action of the nanotubes was similar to that achieved with electroporation for both Pf and the concentrations of nutrients in the protoplasts. On the other hand, PIP1s and PIP2s expression was increased in the protoplasts receiving the control plus MWCNTs treatment but not in those treated with electroporation. This opens new and interesting lines, as it shows that nanotubes are able to modulate the expression of aquaporins.

Deposition of protein-coated multi-walled carbon nanotubes on oxide surfaces and the retention in a silicon micromodel

The aggregation, deposition and porous retention of bovine serum albumin treated multi-walled carbon nanotubes (BSA-MWCNTs) are investigated using dynamic light scattering (DLS), quartz crystal microbalance with dissipation (QCM-D) and 2-dimensional silicon micromodel, respectively. The aggregation of BSA-MWCNTs is consistent with Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. The critical coagulation concentration (CCC) is 175 mM NaCl and 2.7 mM CaCl₂, suggesting that Ca²⁺ causes stronger aggregation. The BSA-MWCNT deposition on SiO₂ surface is unfavorable with critical deposition concentration (CDC) of 100 mM in NaCl and 0.9 mM in CaCl₂. The deposition on the Al₂O₃ surface is favorable. Deposition rate is dominated by electrostatic forces at low ionic strength (IS), but electrostatic interaction is eliminated when IS is above CDC. Therefore the deposition rate on SiO₂ or Al₂O₃ surface starts decreasing at the CDC point due to the reduced particle diffusion. In micromodel, the amount and position of attached BSA-MWCNTs in pore space can be observed by a microscope. The retention attachment efficiency increases at higher IS. The suspended BSA-MWCNTs approach to the collector through either diffusion or interception. The attached BSA-MWCNTs narrow the pore space and then clog the pore throats. The straining process happens on the clogged pore throats.

A conductive cell-imprinted substrate based on CNT-PDMS composite

Cell function regulation is influenced by continuous biochemical and biophysical signal exchange within the body. Substrates with nano/micro-scaled topographies that mimic the physiological niche are widely applied for tissue engineering applications. As the cartilage niche is composed of several stimulating factors, a multifunctional substrate providing topographical features while having the capability of electrical stimulation is presented. Herein, we demonstrate a biocompatible and conductive chondrocyte cell-imprinted substrate using polydimethylsiloxane (PDMS) and carbon nanotubes (CNTs) as conductive fillers. Unlike the conventional silicon wafers or structural photoresist masters used for molding, cell surface topographical replication is challenging as biological cells showed extremely sensitive to chemical solvent residues during molding. The composite showed no significant difference compared with PDMS with regard to cytotoxicity, whereas an enhanced cell adhesion was observed on the conductive composite's surface. Integration of nanomaterials into the cell seeding scaffolds can make tissue regeneration process more efficient.

A coupled effect of dehydration and electrostatic interactions on selective ion transport through charged nanochannels

Selective ion transport is an essential feature of biological ion channels. Due to the subnanometer size and negatively charged surface of ion channels, the ion selectivity is affected by both dehydration effects and electrostatic interactions. Their coupled effect on selective ion transport, however, has been elusive. Here, using molecular dynamics simulations, we study ion (Li⁺ and Mg²⁺) transport through subnanometer carbon nanotubes (CNTs) with varying charge densities. Our results indicate that the dehydration effect governs the ionic transport at low surface charge densities, hence the nanochannel shows a selectivity for Li⁺ ions. In contrast, the nanochannel switches to a selectivity for Mg²⁺ ions as the electrostatic interaction between the cations and the negatively charged wall dominates the transport at high surface charge densities.

Aggregation kinetics of microplastics in aquatic environment: Complex roles of electrolytes, pH, and natural organic matter

Microplastics are an emerging contaminants of concern in aquatic environments. The aggregation behaviors of microplastics governing their fate and ecological risks in aquatic environments is in need of evaluation. In this study, the aggregation behavior of polystyrene microspheres (micro-PS) in aquatic environments was systematically investigated over a range of monovalent and divalent electrolytes with and without natural organic matter (i.e., Suwannee River humic acid (HA)), at pH 6.0, respectively. The zeta potentials and hydrodynamic diameters of micro-PS were measured and the subsequent aggregation kinetics and attachment efficiencies (α) were calculated. The aggregation kinetics of micro-PS exhibited reaction- and diffusion-limited regimes in the presence of monovalent or divalent electrolytes with distinct critical coagulation concentration (CCC) values, followed the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. The CCC values of micro-PS were14.9, 13.7, 14.8, 2.95 and 3.20 mM for NaCl, NaNO₃, KNO₃, CaCl₂ and BaCl₂, respectively. As expected, divalent electrolytes (i.e., CaCl₂ and BaCl₂) had stronger influence on the aggregation behaviors of micro-PS as compared to monovalent electrolytes (i.e., NaCl, NaNO₃ and KNO₃). HA enhanced micro-PS stability and shifted the CCC values to higher electrolyte concentrations for all types of electrolytes. The CCC values of micro-PS were lower than reported carbonaceous nanoparticles CCC values. The CCC[Ca²⁺]/CCC [Na⁺] ratios in the absence and presence of HA at pH 6.0 were proportional to Z^-2.34 and Z^-2.30, respectively. These ratios were in accordance with the theoretical Schulze-Hardy rule, which considers that the CCC is proportional to z^-6-z^-2. These results indicate that the stability of micro-PS in the natural aquatic environment and the possibility of significant aqueous transport of micro-PS.

Synthesis, characterization, and interactions of single-walled carbon nanotubes modified with doxorubicin with Langmuir-Blodgett biomimetic membranes

The synthesis, characterization, and the influence of single-walled carbon nanotubes (SWCNTs) modified with an anticancer drug doxorubicin (DOx) on the properties of model biological membrane as well as the comparison of the two modes of modification has been presented. The drug was covalently attached to the nanotubes either preferentially on the sides or at the ends of the nanotubes by the formation of hydrazone bond. The efficiency of the modification was proved by the results of FTIR, Raman, and thermogravimetric analysis. In order to characterize the influence of SWCNT-DOx conjugates on model biological membranes, Langmuir technique has been employed. The mixed monolayers composed of 1,2-dipalmitoyl-sn-glycero-3-phosphothioethanol (DPPTE) and SWCNT-DOx with different weight ratio have been prepared. It has been shown that changes in the isotherm characteristics depend on the SWCNTs content. While smaller amounts of SWCNTs do not exert significant differences, the introduction of the prevailing content of the nanotubes increases area per molecule and decreases the maximum value of compression modulus, leading to more fluid monolayer. However, upon increasing the surface pressure, the aggregation of carbon nanotubes within the thiolipid matrix has been observed. Mixed layers of DPPTE/SWCNT-DOx were also transferred onto gold electrodes by means of LB method. Cyclic voltammetry showed that SWCNT-DOx conjugates remain adsorbed at the electrode surface and are stable in time. Additionally, higher values of peak current and DOx surface concentration obtained for side modification prove that side modification allows for more efficient conjugation of the drug to carbon nanotubes. Graphical abstractᅟ.

Surface characterization of nanoparticles using near-field light scattering

The effect of nanoparticle surface coating characteristics on colloidal stability in solution is a critical parameter in understanding the potential applications of nanoparticles, especially in biomedicine. Here we explored the modification of the surface of poly(ethylene glycol)-coated superparamagnetic iron oxide nanoparticles (PEG-SPIOs) with the synthetic pseudotannin polygallol via interpolymer complexation (IPC). Changes in particle size and zeta potential were indirectly assessed via differences between PEG-SPIOs and IPC-SPIOs in particle velocity and scattering intensity using near-field light scattering. The local scattering intensity is correlated with the distance between the particle and waveguide, which is affected by the size of the particle (coating thickness) as well as the interactions between the particle and waveguide (related to the zeta potential of the coating). Therefore, we report here the use of near-field light scattering using nanophotonic force microscopy (using a NanoTweezer^TM instrument, Halo Labs) to determine the changes that occurred in hydrated particle characteristics, which is accompanied by an analytical model. Furthermore, we found that altering the salt concentration of the suspension solution affected the velocity of particles due to the change of dielectric constant and viscosity of the solution. These findings suggest that this technique is suitable for studying particle surface changes and perhaps can be used to dynamically study reaction kinetics at the particle surface.

Quantification of C60-induced membrane disruption using a quartz crystal microbalance

Direct contact between fullerene C₆₀ nanoparticles (NPs) and cell membranes is one of mechanisms for its cytotoxicity. In this study, the influence of C₆₀ NPs on lipid membranes was investigated. Giant unilamellar vesicles (GUVs) were used as model cell membranes to observe the membrane disruption after C₆₀ exposure. C₆₀ NPs disrupted the positively charged GUVs but not the negatively charged vesicles, confirming the role of electrostatic forces. To quantify the C₆₀ adhesion on membrane and the induced membrane disruption, a supported lipid bilayer (SLB) and a layer of small unilamellar vesicles (SUVs) were used to cover the sensor of a quartz crystal microbalance (QCM). The mass change on the SLB (Δm_SLB) was caused by the C₆₀ adhesion on the membrane, while the mass change on the SUV layer (Δm_SUV) was the combined result of C₆₀ adhesion (mass increase) and SUV disruption (mass loss). The surface area of SLB (A_SLB) was much smaller than the surface area of SUV (A_SUV), but Δm_SLB was larger than Δm_SUV after C₆₀ deposition, indicating that C₆₀ NPs caused remarkable membrane disruption. Therefore a new method was built to quantify the degree of NP-induced membrane disruption using the values of Δm_SUV/Δm_SLB and A_SUV/A_SLB. In this way, C₆₀ can be compared with other types of NPs to know which one causes more serious membrane disruption. In addition, C₆₀ NPs caused negligible change in the membrane phase, indicating that membrane gelation was not the mechanism of cytotoxicity for C₆₀ NPs. This study provides important information to predict the environmental hazard presented by fullerene NPs and to evaluate the degree of membrane damage caused by different NPs.

Fullerene C₆₀ NPs adhere on lipid membrane due to electrostatic force and cause membrane disruption.

Coating carbon nanotubes with humic acid using an eco-friendly mechanochemical method: Application for Cu(II) ions removal from water and aquatic ecotoxicity

In this work, industrial grade multi-walled carbon nanotubes (MWCNT) were coated with humic acid (HA) for the first time by means of a milling process, which can be considered an eco-friendly mechanochemical method to prepare materials and composites. The HA-MWCNT hybrid material was characterized by atomic force microscopy (AFM), scanning electron microscopies (SEM and STEM), X-ray photoelectron spectroscopy (XPS), termogravimetric analysis (TGA), and Raman spectroscopy. STEM and AFM images demonstrated that the MWCNTs were efficiently coated by the humic acid, thus leading to an increase of 20% in the oxygen content at the nanotube surface as observed by the XPS data. After the milling process, the carbon nanotubes were shortened as unveiled by SEM images and the values of ID/IG intensity ratio increased due to shortening of the nanotubes and increasing in the number defects at the graphitic structure of carbon nanotubes walls. The analysis of TGA data showed that the quantity of the organic matter of HA on the nanotube surface was 25%. The HA coating was responsible to favor the dispersion of MWCNTs in ultrapure water (i.e. -42mV, zeta-potential value) and to improve their capacity for copper removal. HA-MWCNTs hybrid material adsorbed 2.5 times more Cu(II) ions than oxidized MWCNTs with HNO₃, thus evidencing that it is a very efficient adsorbent material for removing copper ions from reconstituted water. The HA-MWCNTs hybrid material did not show acute ecotoxicity to the tested aquatic model organisms (Hydra attenuata, Daphnia magna, and Danio rerio embryos) up to the highest concentration evaluated (10mgL^-1). The results allowed concluding that the mechanochemical method is effective to coat carbon nanotubes with humic acid, thus generating a functional hybrid material with low aquatic toxicity and great potential to be applied in environmental nanotechnologies such as the removal of heavy metal ions from water.

Effect of Multi-walled Carbon Nanotubes on Metabolism and Morphology of Filamentous Green Microalgae

Multi-walled carbon nanotubes (MWCNTs) have potential applications in the industrial, agricultural, pharmaceutical, medical, and environmental remediation fields. However, many uncertainties exist regarding the environmental implications of engineered nanomaterials. This study examined the effect of the MWCNTs on metabolic status and morphology of filamentous green microalgae Klebsormidium flaccidum. Appropriate concentrations of MWCNT (1, 50, and 100 μg mL^-1) were added to a microalgal culture in the exponential growth phase and incubated for 24, 48, 72, and 96 h. Exposure to MWCNT led to reductions in algal growth after 48 h and decreased on cell viability for all experimental endpoints except for 1 µg mL^-1 at 24 h and 100 µg mL^-1 after 72 h. At 100 µg mL^-1, MWCNTs induced reactive oxygen species (ROS) production and had an effect on intracellular adenosine triphosphate (ATP) content depending on concentration and time. No photosynthetic activity variation was observed. Observations by scanning transmission electron microscopy showed cell damage. In conclusion, we have demonstrated that exposure to MWCNTs affects cell metabolism and microalgal cell morphology. To our best knowledge, this is the first case in which MWCNTs exhibit adverse effects on filamentous green microalgae K. flaccidum. These results contribute to elucidate the mechanism of MWCNT nanotoxicity in the bioindicator organism of terrestrial and freshwater habitats.

Membrane interactions and antimicrobial effects of inorganic nanoparticles

Interactions between nanoparticles and biological membranes are attracting increasing attention in current nanomedicine, and play a key role both for nanotoxicology and for utilizing nanomaterials in diagnostics, drug delivery, functional biomaterials, as well as combinations of these, e.g., in theranostics. In addition, there is considerable current interest in the use of nanomaterials as antimicrobial agents, motivated by increasing resistance development against conventional antibiotics. Here, various nanomaterials offer opportunities for triggered functionalites to combat challenging infections. Although the performance in these diverse applications is governed by a complex interplay between the nanomaterial, the properties of included drugs (if any), and the biological system, nanoparticle-membrane interactions constitute a key initial step and play a key role for the subsequent biological response. In the present overview, the current understanding of inorganic nanomaterials as antimicrobial agents is outlined, with special focus on the interplay between antimicrobial effects and membrane interactions, and how membrane interactions and antimicrobial effects of such materials depend on nanoparticle properties, membrane composition, and external (e.g., light and magnetic) fields.

Cytotoxicity induced by carbon nanotubes in experimental malignant glioma

Despite multiple advances in the diagnosis of brain tumors, there is no effective treatment for glioblastoma. Multiwalled carbon nanotubes (MWCNTs), which were previously used as a diagnostic and drug delivery tool, have now been explored as a possible therapy against neoplasms. However, although the toxicity profile of nanotubes is dependent on the physicochemical characteristics of specific particles, there are no studies exploring how the effectivity of the carbon nanotubes (CNTs) is affected by different methods of production. In this study, we characterize the structure and biocompatibility of four different types of MWCNTs in rat astrocytes and in RG2 glioma cells as well as the induction of cell lysis and possible additive effect of the combination of MWCNTs with temozolomide. We used undoped MWCNTs (labeled simply as MWCNTs) and nitrogen-doped MWCNTs (labeled as N-MWCNTs). The average diameter of both pristine MWCNTs and pristine N-MWCNTs was ~22 and ~35 nm, respectively. In vitro and in vivo results suggested that these CNTs can be used as adjuvant therapy along with the standard treatment to increase the survival of rats implanted with malignant glioma.

Bound and unbound humic acids perform different roles in the aggregation and deposition of multi-walled carbon nanotubes

Natural organic matter influences the carbon nanotube transport in aqueous environments. The role of bound humic acid (HA) on carbon nanotubes and unbound HA in bulk solution in the aggregation and deposition of carboxylated multi-walled carbon nanotubes (C-MWNTs) was examined in NaCl and CaCl₂ electrolyte solution. Time-resolved dynamic light scattering and quartz crystal microbalance with dissipation monitoring were employed to investigate the C-MWNT aggregation and deposition kinetics, respectively. The critical coagulation concentration (CCC) of C-MWNTs is 30mM in NaCl and 3mM in CaCl₂. The bound HA results in CCCs of 32mM in NaCl and 2.9mM in CaCl₂. However, the existing unbound HA causes much slower aggregation in both NaCl and CaCl₂ electrolytes and results in CCCs of 86mM in NaCl and 5.8mM in CaCl₂. The HA adsorption experiment confirms the additional adsorption of unbound HA in the presence of cations, which can increase the steric effect between C-MWNTs. The more negative charge of C-MWNTs in the presence of unbound HA also stabilizes the suspension. In contrast, the bound HA on C-MWNTs has a more remarkable effect on the deposition rate on the SiO₂ surface than the unbound HA. Bound HA changes the C-MWNT surface functional groups, leading to differences in the interaction between C-MWNTs and the SiO₂ surface. Hence, the C-MWNTs dispersed by their covalently bonded oxygen-containing groups on the carbon framework and dispersed by the bound HA show nearly the same aggregation rates but quite different deposition rates. The additional unbound HA adsorption does not change the surface functional groups or the changing trend of the CNT deposition rate. Distinguishing the role of bound and unbound HA in the aggregation and deposition of carbon nanomaterials is important to predict their transport in various natural waters.