Testing of two different strains of green microalgae for Cu and Ni removal from aqueous media

Exogenous GABA supplementation to facilitate Cr (III) tolerance and lipid biosynthesis in Chlorella sorokiniana

Microalgae possess the prospective to be efficiently involved in bioremediation and biodiesel generation. However, conditions of stress often restrict their growth and diminish different metabolic processes. The current study evaluates the potential of GABA to improve the growth of the microalga Chlorella sorokiniana under Cr (III) stress through the exogenous administration of GABA. The research also investigates the concurrent impact of GABA and Cr (III) stress on various metabolic and biochemical pathways of the microalgae. In addition to the control, cultures treated with Cr (III), GABA, and both Cr (III) and GABA treated were assessed for accurately analysing the influence of GABA. The outcomes illustrated that GABA significantly promoted growth of the microalgae, resulting in higher biomass productivity (19.14 mg/L/day), lipid productivity (3.445 mg/L/day) and lipid content (18%) when compared with the cultures under Cr (III) treatment only. GABA also enhanced Chl a content (5.992 μg/ml) and percentage of protein (23.75%). FAMEs analysis by GC-MS and total lipid profile revealed that GABA treatment can boost the production of SFA and lower the level of PUFA, a distribution ideal for improving biodiesel quality. ICP-MS analysis revealed that GABA supplementation could extend Cr (III) mitigation level up to 97.7%, suggesting a potential strategy for bioremediation. This novel study demonstrates the merits of incorporating GABA in C. sorokiniana cultures under Cr (III) stress, in terms of its potential in bioremediation and biodiesel production without disrupting the pathways of photosynthesis and protein production.

Advances, challenges, and prospects in microalgal-bacterial symbiosis system treating heavy metal wastewater

Heavy metal (HM) pollution, particularly in its ionic form in water bodies, is a chronic issue threatening environmental security and human health. The microalgal-bacterial symbiosis (MABS) system, as the basis of water ecosystems, has the potential to treat HM wastewater in a sustainable manner, with the advantages of environmental friendliness and carbon sequestration. However, the differences between laboratory studies and engineering practices, including the complexity of pollutant compositions and extreme environmental conditions, limit the applications of the MABS system. Additionally, the biomass from the MABS system containing HMs requires further disposal or recycling. This review summarized the recent advances of the MABS system treating HM wastewater, including key mechanisms, influence factors related to HM removal, and the tolerance threshold values of the MABS system to HM toxicity. Furthermore, the challenges and prospects of the MABS system in treating actual HM wastewater are analyzed and discussed, and suggestions for biochar preparation from the MABS biomass containing HMs are provided. This review provides a reference point for the MABS system treating HM wastewater and the corresponding challenges faced by future engineering practices.

Supplementation of micro-nutrients to growth media of microalgae-induced biomass and fatty acids composition for clean energy generation

The presence of harmful heavy metals (HMs) in the aquatic environment can damage the environment and threaten human health. Traditional remediation techniques can have secondary impacts. Thus, more sustainable approaches must be developed. Microalgae have biological properties (such as high photosynthetic efficiency and growth), which are of great advantage in the HMs removal. In this study, the effect of various concentrations (2×, 4×, and 6×) of copper (Cu), cobalt (Co), and zinc (Zn) on microalgae (C. sorokiniana GEEL-01, P. kessleri GEEL-02, D. asymmetricus GEEL-05) was investigated. The microalgal growth kinetics, HMs removal, total nitrogen (TN), total phosphor (TP), and fatty acids (FAs) compositions were analyzed. The highest growth of 1.474 OD680nm and 1.348 OD680nm was obtained at 2× and 4×, respectively, for P. kessleri GEEL-02. P. kessleri GEEL-02 showed high removal efficiency of Cu, Co, and Zn (38.92-55.44%), (36.27-68.38%), and (32.94-51.71%), respectively. Fatty acids (FAs) analysis showed that saturated FAs in C. sorokiniana GEEL-01 and P. kessleri GEEL-02 increased at 2× and 4× concentrations while decreasing at 6×. For P. kessleri GEEL-02, the properties of biodiesel including the degree of unsaturation (UD) and cetane value (CN) increased at 2×, 4×, and 6× as compared to the control. Thus, this study demonstrated that the three microalgae (particularly P. kessleri GEEL-02) are more suitable for nutrient and HMs removal coupled with biomass/biodiesel production.

Terbium Removal from Aqueous Solutions Using a In2O3 Nanoadsorbent and Arthrospira platensis Biomass

Terbium is a rare-earth element with critical importance for industry. Two adsorbents of different origin, In2O3 nanoparticles and the biological sorbent Arthrospira platensis, were applied for terbium removal from aqueous solutions. Several analytical techniques, including X-ray diffraction, Fourier-transform infrared spectroscopy, and scanning electron microscopy, were employed to characterize the adsorbents. The effect of time, pH, and terbium concentration on the adsorption efficiency was evaluated. For both adsorbents, adsorption efficiency was shown to be dependent on the time of interaction and the pH of the solution. Maximum removal of terbium by Arthrospira platensis was attained at pH 3.0 and by In2O3 at pH 4.0-7.0, both after 3 min of interaction. Several equilibrium (Langmuir, Freundlich, and Temkin) and kinetics (pseudo-first order, pseudo-second order, and Elovich) models were applied to describe the adsorption. The maximum adsorption capacity was calculated from the Langmuir model as 212 mg/g for Arthrospira platensis and 94.7 mg/g for the In2O3 nanoadsorbent. The studied adsorbents can be regarded as potential candidates for terbium recovery from wastewater.

Roles and significance of chelating agents for potentially toxic elements (PTEs) phytoremediation in soil: A review

Phytoremediation is a biological remediation technique known for low-cost technology and environmentally friendly approach, which employs plants to extract, stabilise, and transform various compounds, such as potentially toxic elements (PTEs), in the soil or water. Recent developments in utilising chelating agents soil remediation have led to a renewed interest in chelate-induced phytoremediation. This review article summarises the roles of various chelating agents and the mechanisms of chelate-induced phytoremediation. This paper also discusses the recent findings on the impacts of chelating agents on PTEs uptake and plant growth and development in phytoremediation. It was found that the chelating agents have increased the rate of metal absorption and translocation up to 45% from roots to the aboveground plant parts during PTEs phytoremediation. Besides, it was also explored that the plants may experience some phytotoxicity after adding chelating agents to the soil. However, due to the leaching potential of synthetic chelating agents, the use of organic chelants have been explored to be used in PTEs phytoremediation. Finally, this paper also presents comprehensive insights on the significance of using chelating agents through SWOT analysis to discuss the advantages and limitations of chelate-induced phytoremediation.

Copper multifaceted interferences during swine wastewater treatment in high-rate algal ponds: alterations on nutrient removal, biomass composition and resource recovery

Microalgae cultivation in swine wastewater (SW) allows the removal of nutrients and biomass production. However, SW is known for its Cu contamination, and its effects on algae cultivation systems such as high-rate algal ponds (HRAPs) are poorly understood. This gap in the literature limits the proposition of adequate concentrations of Cu to optimise SW treatment and resource recovery in HRAPs. For this assessment, 12 HRAPs installed outdoors were operated with 800 L of SW with different Cu concentrations (0.1-4.0 mg/L). Cu's interferences on the growth and composition of biomass and nutrient removal from SW were investigated through mass balance and experimental modelling. The results showed that the concentration of 1.0 mg Cu/L stimulated microalgae growth, and above 3.0 mg Cu/L caused inhibition accompanied by an accumulation of H₂O₂. Furthermore, Cu affected the contents of lipids and carotenoids observed in the biomass; the highest concentration was observed in the control (16%) and 0.5 mg Cu/L (1.6 mg/g), respectively. An innovative result was verified for nutrient removal, in which increased Cu concentration reduced the N-NH₄⁺ removal rate. In contrast, the soluble P removal rate was enhanced by 2.0 mg Cu/L. Removal of soluble Cu in treated SW reached 91%. However, the action of microalgae in this process was not associated with assimilation but with a pH increase resulting from photosynthesis. A preliminary evaluation of economic viability showed that the commercialisation of biomass considering the concentration of carotenoids obtained in HRAPs with 0.5 mg Cu/L could be economically attractive. In conclusion, Cu affected the different parameters evaluated in this study in a complex way. This can help managers consort nutrient removal, biomass production, and resource recovery, providing information for possible industrial exploitation of the generated bioproducts.

Integrated Omics Approach to Discover Differences in the Metabolism of a New Tibetan Desmodesmus sp. in Two Types of Sewage Treatments

Microalgae are now widely applied in municipal (YH_3) and industrial sewage (YH_4) treatments. Through integrated omics analysis, we studied the similarities and differences at the molecular level between the two different types of sewage treatment processes. The most significantly enriched gene ontology (GO) terms in both types of sewage treatments were the ribosome, photosynthesis, and proteasome pathways. The results show that the pathways of differentially expressed genes (DEGs) and differentially accumulated metabolites (DAMs) were enriched for photosynthesis, glyoxylate and dicarboxylate metabolism, and carbon fixation in photosynthetic organisms. Considering YH_3 vs. YH_4, the metabolism of citrate, sedoheptulose-7P, and succinate was significantly upregulated. In addition, the results showed that the pathways of DEGs and DAMs were enriched in terms of amino acid metabolism and carotenoid biosynthesis in YH_4 vs. YH_3. The metabolism of S-Adenosyl-L-homocysteine was significantly downregulated, 2-oxobutanoate was significantly upregulated and downregulated, and the metabolism of abscisic acid glucose ester (ABA-GE) was also significantly upregulated. Overall, the results of this paper will help to improve the basic knowledge of the molecular response of microalgae to sewage treatments, and help design a response strategy based on microalgae for complex, mixed sewage treatments.

Enhanced Cd(II) biomineralization induced by microalgae after cultivating modification in high-phosphorus culture

In this study, high-phosphorus beared microalgae was prepared by cultivating modification in high-phosphorus culture, and used for the enhanced Cd(II) biomineralization in soil. Batch experiment results showed that Chlorella sorokiniana FK was modified successfully in highly phosphate culture. Both intracellular P (Poly-P, 29.7 mg/kg) and surface P (phosphoryl based functional groups, 3.7 mol/kg) were greatly enhanced, and the Cd(II) removal capacity surged to 45.98 mg/g at equilibrium in the Langmuir simulation. The EXAFS analysis indicated that Cd tended to form a more stable bidentate complex (RPO₄)₂Cd when bounding with phosphate groups on the surface of the high-phosphorus microalgae. Moreover, high-phosphorus beared microalgae not only had higher immobilization amount of Cd(II), but also promoted immobilized Cd from adsorbed state to mineralized state. After high-phosphate cultured, increased density of P-related groups provided more adsorption sites, while the decomposition of intracellular Poly-P released phosphate ions into cell surface microenvironment, which combined and promoted the formation of Cd₃(PO₄)₂/Cd(H₂PO₄)₂ on cell surface. Cd-contaminated soil remediation experiments applying high-surface-phosphate beared microalgae further showed that more Cd stabilized as a residue fraction within 49 days. This study proposes that the high-phosphate culture strategy is a good way to improve the immobilization of heavy metals in soil induced by microorganisms.

Effective Usage of Biochar and Microorganisms for the Removal of Heavy Metal Ions and Pesticides

The bioremediation of heavy metal ions and pesticides is both cost-effective and environmentally friendly. Microbial remediation is considered superior to conventional abiotic remediation processes, due to its cost-effectiveness, decrement of biological and chemical sludge, selectivity toward specific metal ions, and high removal efficiency in dilute effluents. Immobilization technology using biochar as a carrier is one important approach for advancing microbial remediation. This article provides an overview of biochar-based materials, including their design and production strategies, physicochemical properties, and applications as adsorbents and support for microorganisms. Microorganisms that can cope with the various heavy metal ions and/or pesticides that enter the environment are also outlined in this review. Pesticide and heavy metal bioremediation can be influenced by microbial activity, pollutant bioavailability, and environmental factors, such as pH and temperature. Furthermore, by elucidating the interaction mechanisms, this paper summarizes the microbe-mediated remediation of heavy metals and pesticides. In this review, we also compile and discuss those works focusing on the study of various bioremediation strategies utilizing biochar and microorganisms and how the immobilized bacteria on biochar contribute to the improvement of bioremediation strategies. There is also a summary of the sources and harmful effects of pesticides and heavy metals. Finally, based on the research described above, this study outlines the future scope of this field.

Biosorption of chromium (VI), iron (II), copper (II), and nickel (II) ions onto alkaline modified Chlorella vulgaris and Spirulina platensis in binary systems

The simultaneous biosorption of chromium (VI), copper (II), iron (II), and nickel (II) was investigated by alkaline-modified Chlorella vulgaris and Spirulina platensis in binary systems. The alkaline modified biosorbents were CV-KCl, SP-KCl, CV-Na2CO3, and SP-Na2CO3. The maximum removal efficiency recorded in this study was 99.7% with a biosorbent dosage of 0.3 g within a pH range of 2 to 6. The highest biosorption capacities obtained were 14.1, 13.5, 21.6, and 15.8 mg/g for Cr (VI), Cu (II), Fe (II), and Ni (II), respectively. The pseudo-second-order best described the biosorption rate, while the Langmuir isotherm model best described the biosorption equilibrium interaction. The values for Gibbs free energy (ΔG°) were in the range of 0.5 to 6.5 kJ/mol (Cr-Fe), 1.3 to 8.4 kJ/mol (Cr-Ni), and 3.9 to 11.3 kJ/mol (Cr-Cu) binary systems. This showed that the biosorption processes were characterized by physisorption reactions. The Temkin constant B values were in the range of 0.339 to 1.485 kcal/mol and the biosorption processes were largely exothermic reactions. The values for the Freundlich constant KF were between 1.4 and 10.4 (L/g), which indicated favourable biosorption. The Temkin isotherm model confirmed a strong binding affinity for Fe (II) and Ni (II). The results suggest that potassium chloride and sodium carbonate modification are very suitable for green algae and cyanobacteria for the efficient removal of heavy metals.

Adsorption of Ni2+ in aqueous solution by KMnO4 modified biomass: investigation on adsorption kinetics and modification mechanism

In this study, KMnO₄ modification was proved to effectively increase the Ni²⁺ adsorption capacity of biomass. In order to clarify the KMnO₄ modification mechanism, the Ni²⁺ adsorption characteristics of KMnO₄ modified corncob (PPCB) under adsorption time, pH and Ni²⁺ concentration were studied. The results showed that the adsorption was the pseudo second-order kinetic process, indicating that chemisorption was the dominated process, which followed the Langmuir isotherm model and the highest Ni²⁺ adsorption capacity of PPCB reached 35.6 mg/g. By KMnO₄ modification, the corncob was oxidized to generate carboxylates, and the MnO₂ (reduction product) was loaded on the modified corncob, both carboxylates and MnO₂ increased the Ni²⁺ adsorption capacity of PPCB. The molecular dynamic results indicated the carboxylate structures had the strongest adsorption capacity. Moreover, the Ni²⁺ removal efficiency of KMnO₄ modified biomass decreased linearly with the increase of lignin content in biomass, while KMnO₄ modified lignin showed a good adsorption performance, indicating that the cross-linked structures between lignin and other components in the biomass could inhibit the adsorption capacity of PPCB.

Assessment of Metal Accumulation by Arthrospira platensis and Its Adaptation to Iterative Action of Nickel Mono- and Polymetallic Synthetic Effluents

Cyanobacteria-mediated wastewater remediation is an economical, efficient, and eco-friendly technology. The present work deals with the bioaccumulation performance of Arthrospira platensis (Spirulina) grown for four cycles in a medium containing nickel mono- and polymetallic synthetic effluents. The metal uptake by spirulina biomass was evaluated using neutron activation analysis. The effects of effluents on biomass production, protein, and phycobiliprotein content were assessed. Metal accumulation in the biomass depended on the effluent composition and metal ion concentrations. Nickel accumulation in the biomass was directly proportional to its concentration in effluents, and maximum uptake (1310 mg/kg) was attained in the Ni/Cr/Fe system. In the same system, biomass accumulated 110 times more chromium and 4.7 times more iron than control. The highest accumulation of copper (2870 mg/kg) was achieved in the Ni/Cu/Zn/Mo system and zinc (1860 mg/kg)—in the Ni/Cu/Zn/Sr system. In biomass grown in the media loaded with nickel and also chromium, iron, copper, strontium, zinc, and molybdenum, a decrease in productivity (on average by 10%) during the first cycle of cultivation and moderate reduction of protein content (by 15–27%) was observed. The presence of metals in the cultivation media inhibited phycobiliprotein synthesis, especially of phycocyanin, and promoted the synthesis of allophycocyanin. The maximum reduction of phycocyanin content was 77%, and the increase of allophycocyanin content—by 45%. Arthrospira platensis may be deemed as bioremediation of nickel-polluted wastewaters of complex composition.

Potential of three local marine microalgae from Tunisian coasts for cadmium, lead and chromium removals

Metal elements are widely used in various industrial activities and are considered as common water source contaminants. Thus, the development of cost-effective, simple design and efficient processes for trace metal elements removal from contaminated water sources is of great interest. The effects of cadmium, lead and chromium on growth, biomolecules accumulation and metabolic responses of Amphora coffaeiformis, Navicula salinicola and Dunaliella salina isolated from Tunisian coasts were tested. The bioremediation capacities of the three microalgae strains and the mechanisms involved in ions metal removal were also investigated. N. salinicola and D. salina seem to be better tolerating to Cr, while A. coffaeiformis and N. salinicola showed high resistance to Pb. The expression profile analyses by qRT-PCR of the antioxidant defense-related genes revealed that Cd, Pb and Cr treatments induce the up-regulation of catalase and superoxide dismutase coding genes for A. coffaeiformis and D. salina. Regarding N. salinicola, the catalase coding gene seems to be overexpressed after Cd, Pb and Cr exposure while only Cd and Cr induce superoxide dismutase gene overexpression. Moreover, the phytochelatin synthase (a metal chelator synthesis-related gene) was up-regulated in N. salinicola, A. coffaeiformis and D. salina after Cr exposure and also in A. coffaeiformis and D. salina after Cd exposure. While Pb treatments induce overexpression of phytochelatin synthase coding gene only for D. salina. Studied strains showed promising metal removal efficiencies for both Pb and Cr ions metals reached 95% for D. salina. Ion metal removal mechanisms study revealed that intracellular bioaccumulation process is used by D. salina for Cr up-taking. However, both intracellular and extracellular removal mechanisms are involved for Pb and Cr removal using A. coffaeiformis, N. salinicola and for Pb removal using D. salina. FTIR analysis demonstrated that several functional groups as carboxyl, hydroxyl, amino, phosphate and sulfate may participate in the bioadsorption process.

Chlorella vulgaris phycoremediation at low Cu+2 contents: Proteomic profiling of microalgal metabolism related to fatty acids and CO2 fixation

The aim of this work was to correlate metabolic changes with copper ions (Cu⁺²) bioremediation by microalgae C. vulgaris 097 CCMA-UFSCar at low Cu⁺² content. The metabolic effects include proteome changes related to fatty acid biosynthesis (value-added product) and carbon fixation (climate change mitigation). Cu⁺², even at low concentration, showed a significant negative impact on C. vulgaris growth. The microalgal bioremediation reached 100, 74, 38 and 26% for Cu⁺² content at 0.1; 0.3; 0.6 and 0.9 mg L^-1, respectively. Regarding proteomics, the numbers of proteins reduced (≈37%) from 581 proteins (control) to 369 proteins (0.9 mg of Cu⁺² L^-1) compared to control. The microalgal CO₂ fixation is strictly related to the Calvin cycle, particularly phase 1, in which ribulose bisphosphate carboxylase large chain (RuBisCO) produces two phosphoglycerate molecules from CO₂ and ribulose 1,5-bisphosphate. Then, phosphoglycerate can be metabolically reduced into glucose. When compared to control, the RuBisCO was underexpressed (≈50%). Similar changes in proteomic profiling of metabolism-related to fatty acid biosynthesis was observed. Nevertheless, no protein was found for the cultivation at 0.9 mg of Cu⁺² L^-1. Thus, the analysis of C. vulgaris proteomic data indicated that even at low concentration, Cu⁺² lead to drastic metabolic changes.

Swine wastewater treatment in high rate algal ponds: Effects of Cu and Zn on nutrient removal, productivity and biomass composition

This study aimed to evaluate the simultaneous interferences of Cu and Zn found in swine wastewater (SW) in the development of microalgae considering real conditions of cultivation in high rate algal ponds (HRAPs). Ten HRAPs on a pilot scale were fed with SW with different mixtures of Cu (0.5-3.0 mg/L) and Zn (5.0-25.0 mg/L). The interferences of these metals in removing nutrients (N-NH₄⁺ and soluble phosphorus (Ps)) from the SW were determined. In addition, this study evaluated the effects on biomass growth and biochemical composition. Chlorella sp. was dominant in all HRAPs and the condition that potentiated its growth occurred in medium containing 1.8 mg Cu/L + 15.0 mg Zn/L, while higher concentrations conferred inhibition. Only Cu compromised the removal rates of N-NH₄⁺ while the effects of Zn were not significant. Contrary, Zn interfered with Ps removal rates, but the impact of Cu was not significant. The greatest Cu applications increased the protein levels by biomass (50.5-55.2 %). Carbohydrate accumulation was favored by conditions that inhibited the development of microalgae due to either limitation or excess of metals. Copper and Zn compromised the levels of lipids, and the control treatment had the highest content (24.5 %). The presence of Cu and Zn changed the dynamics of HRAPs regarding nutrient removal, productivity, and biochemical composition of the biomass.

Bio-removal of PtCl62- complex by Galdieria sulphuraria

Bio-removal of negative charged platinum complex is of great challenge owing to electrostatic repulsions between PtCl₆^2- and general extracellular polymeric substance (EPS) of microorganism. Galdieria sulphuraria (GS) are thermophilic and acidophilic microalga with specific metabolism, which subsequently lead to their unique cellular compositions such as EPS and phycocyanin, possibly providing a strategy to deal with negative charged metal complex. Accordingly, G. sulphuraria are employed to remove negative charged PtCl₆^2- complex with initial concentrations ranging from 0, 10, 20, 30, to 45 ppm. The growth rates of G. sulphuraria with microalgae named as GS-0, GS-10, GS-20, GS-30, and GS-45, respectively, and simultaneously bio-removal efficiencies of PtCl₆^2- are investigated. G. sulphuraria are independent to PtCl₆^2- within 0-30 ppm, while they are inhibited within 45 ppm of PtCl₆^2-. The PtCl₆^2- removal efficiencies of GS-10, GS-20, and GS-30 increase from 94.58%, 95.52%, to 95.92%, while decrease to 71.81% of GS-45. About 92.39%, 93.77%, 94.29%, and 75.21% of PtCl₆^2- adsorbed are accumulated within GS-10, GS-20, GS-30, GS-45, with few in EPS. The PtCl₆^2- complexes accumulated in EPS and algae cells are possibly decomposed to PtCl₄ according to the increasing zeta potentials of EPS and algae cells. The results indicate that PtCl₆^2- is efficiently removed by G. sulphuraria, achieving bio-removal of negative charged PtCl₆^2- complex from wastewater.

Bioremediation of heavy metals from wastewater: a current perspective on microalgae-based future

Heavy metals-containing drinking water and wastewater are posing a severe threat to the environment, and living beings on land, air and water. Different conventional, advanced nanomaterials-based and biological method has been employed for the treatment of heavy metals. Among the biological methods, microalgae are an important group of micro-organisms that have numerous environmental applications and can remediate heavy metals from wastewater. Also, it has numerous advantages over conventional remediation processes. Microalgae cells can uptake the heavy metal via different physiological and biological methods and are utilized as a nutrient source to regulate its metabolic process for the production of biomass. Furthermore, the enhancement in heavy metal removal efficiency can be improved using different strategies such as immobilization of algal cells, development of algal consortia and designing of microalgae-based nanocomposite materials. Also, it can significantly contribute towards environmental sustainability and future. Thus, the review provides a critical overview of heavy metals and their existence along with their negative effects on humans. This review provides insight on recent advanced nanomaterial approaches for the removal of heavy metals, overviews of microalgae-based heavy metal uptake mechanisms and their potential for the amputation of different heavy metals. Furthermore, the special focus is on recent strategies that enhance heavy metal removal efficiency and contribute towards sustainability for the development of a microalgae-based future.

Native Desmodesmus sp. and Chlorella sp. isolated from the Reconquista River display a different binding preference for Cu(II) and Zn(II)

The present work was developed to study the metal removal performance of unicellular algae isolated from the Reconquista River and to evaluate the effect of the presence of more than one metal in the removal process. Thus, native species of unicellular algae were isolated from the highly contaminated Reconquista River. All of the isolates were classified, at genus level, based on their morphological appearance. Nine isolates were screened for their Zn(II) removal capacities. Chlorella sp. RR5 and Desmodesmus sp. RR7 were selected based on their removal performance, and their potential in the remediation of multiple metals was analyzed. Therefore, zinc (Zn(II)), copper (Cu(II)), and chromium (Cr(VI)) removal was evaluated in mono- and multi-metallic solutions. Biosorption capacities were high (0.8-1.8 mmol g^-1) for Zn(II) and Cu(II) in mono-metallic solutions. Removal capacities decreased up to 48% in multi-metallic solutions. Interestingly, when multi-metallic systems were considered, each strain showed a metal preference. Chlorella sp. removed better Cu(II) meanwhile Desmodesmus sp. showed a preference for Zn(II). Thus, a metal-binding selectivity in each strain was determined. Chromium (VI) remediation was almost null in the conditions analyzed in this work. Fourier transformation infrared spectroscopy (FT-IR) analysis showed that polysaccharides were the main functional group involved in metal adsorption and, in some cases, also the carboxylates played an important role. Overall, we were able to analyze a new source of algal diversity and perform a metal removal characterization of them, leading to the identification of a metal selectivity based on the characteristics of the tested algal strains.

Exploiting the Potential in Water Cleanup from Metals and Nutrients of Desmodesmus sp. and Ampelodesmos mauritanicus

Increasing levels of freshwater contaminants, mainly due to anthropogenic activities, have resulted in a great deal of interest in finding new eco-friendly, cost-effective and efficient methods for remediating polluted waters. The aim of this work was to assess the feasibility of using a green microalga Desmodesmus sp., a cyanobacterium Nostoc sp. and a hemicryptophyte Ampelodesmos mauritanicus to bioremediate a water polluted with an excess of nutrients (nitrogen and phosphorus) and heavy metals (copper and nickel). We immediately determined that Nostoc sp. was sensitive to metal toxicity, and thus Desmodesmus sp. was chosen for sequential tests with A. mauritanicus. First, A. mauritanicus plants were grown in the 'polluted' culture medium for seven days and were, then, substituted by Desmodesmus sp. for a further seven days (14 days in total). Heavy metals were shown to negatively affect both the growth rates and nutrient removal capacity. The sequential approach resulted in high metal removal rates in the single metal solutions up to 74% for Cu and 85% for Ni, while, in the bi-metal solutions, the removal rates were lower and showed a bias for Cu uptake. Single species controls showed better outcomes; however, further studies are necessary to investigate the behavior of new species.

Microalgal biosorption of heavy metals: A comprehensive bibliometric review

Heavy metals in the effluents released from industrial establishments pose risks to the environment and society. Prevalent organisms such as microalgae in industrial wastes can thrive in this harmful environment. The connection of the metal-binding proteins of the microalgal cell wall to the metal ions of the heavy metals enables microalgae as an ideal medium for biosorption. The current literature lacks the review of various microalgae used as biosorption of heavy metals from industrial effluents. This work aims to comprehensively review the literature on the use of microalgae as a biosorption for heavy metals. The study summarizes the application of different microalgae for heavy metals removal by identifying the various factors affecting the biosorption performance. Approaches to quantifying the heavy metals concentration are outlined. The methods of microalgae to generate biocompounds to enable biosorption of heavy metals are itemized. The study also aims to identify the materials produced by microalgae to facilitate biosorption. The industrial sectors with the potential benefit from the adoption of microalgal biosorption of heavy metals are recognized. Moreover, the current challenges and future perspectives of microalgal biosorption are discussed.

Enhanced removal of cesium by potassium-starved microalga, Desmodesmus armatus SCK, under photoheterotrophic condition with magnetic separation

This study investigated the feasibility of using photoheterotrophic microalga, Desmodesmus armatus SCK, for removal of cesium (Cs⁺) followed by recovery process using magnetic nanoparticles. The comparison of three microalgae results indicated that D. armatus SCK removed the most Cs⁺ at both 25 °C and 10 °C. The results also revealed that the use of microalga grown in potassium (K⁺)-starved condition improves the accumulation of Cs⁺. Heterotrophic mode with addition of volatile fatty acids (VFAs), especially acetic acids (HAc), also enhanced removal of Cs⁺ by K⁺-starved D. armatus SCK; maximum removal efficiency of Cs⁺ was almost 2-fold higher than that of cells grown without organic carbon source. The Cs⁺ taken up by this microalga was efficiently harvested using magnetic nanoparticles, polydiallyldimethylammonium (PDDA)-FeO₃. Finally, this strain eliminated more than 99% of radioactive ¹³⁷Cs from solutions of 10, 100, and 1000 Bq mL^-1. Therefore, use of K⁺-starved microalga, D. armatus SCK, with VFAs could be promising means to remove the Cs from the liquid wastes.

Microalgal Metallothioneins and Phytochelatins and Their Potential Use in Bioremediation

The persistence of heavy metals (HMs) in the environment causes adverse effects to all living organisms; HMs accumulate along the food chain affecting different levels of biological organizations, from cells to tissues. HMs enter cells through transporter proteins and can bind to enzymes and nucleic acids interfering with their functioning. Strategies used by microalgae to minimize HM toxicity include the biosynthesis of metal-binding peptides that chelate metal cations inhibiting their activity. Metal-binding peptides include genetically encoded metallothioneins (MTs) and enzymatically produced phytochelatins (PCs). A number of techniques, including genetic engineering, focus on increasing the biosynthesis of MTs and PCs in microalgae. The present review reports the current knowledge on microalgal MTs and PCs and describes the state of art of their use for HM bioremediation and other putative biotechnological applications, also emphasizing on techniques aimed at increasing the cellular concentrations of MTs and PCs. In spite of the broad metabolic and chemical diversity of microalgae that are currently receiving increasing attention by biotechnological research, knowledge on MTs and PCs from these organisms is still limited to date.

Sustainable Iron Recovery and Biodiesel Yield by Acid-Adapted Microalgae, Desmodesmus sp. MAS1 and Heterochlorella sp. MAS3, Grown in Synthetic Acid Mine Drainage

Sustainable resource recovery is the key to manage the overburden of various waste entities of mining practices. The present study demonstrates for the first time a novel approach for iron recovery and biodiesel yield from two acid-adapted microalgae, Desmodesmus sp. MAS1 and Heterochlorella sp. MAS3, grown in synthetic acid mine drainage (SAMD). Virtually, there was no difference in the growth of the strain MAS3 both in Bold's basal medium (control) and SAMD. Using the IC50 level (200 mg L-1) and a lower concentration (50 mg L-1) of iron in SAMD, the cell granularity, exopolysaccharide (EPS) secretion, iron recovery, and biodiesel were assessed in both the strains. Both cell granularity and accumulation of EPS were significantly altered under metal stress in SAMD, resulting in an increase in total accumulation of iron. Growth of the microalgal strains in SAMD yielded 12-20% biodiesel, with no traces of heavy metals, from the biomass. The entire amount of iron, accumulated intracellularly, was recovered in the residual biomass. Our results on the ability of the acid-adapted microalgal strains in iron recovery and yield of biodiesel when grown in SAMD indicate that they could be the potential candidates for use in bioremediation of extreme habitats like AMD.

Aluminium triggers oxidative stress and antioxidant response in the microalgae Scenedesmus sp

Aluminium (Al) water pollution is an increasing environmental problem and comprehensive analysis of toxic responses of aquatic primary producer organisms is imperative. We characterized the antioxidant response of Scenedesmus sp. microalga to Al-induced oxidative stress. After 72 h of exposure to Al (0, 10, and 100 μM) in a modified Bold Basal Medium (pH 5.0), we observed cell aggregation and alterations in the subcellular structure, strong lipid peroxidation and oxidative stress induction (detected with the fluorescent probe 2',7'-dichlorodihydrofluorescein diacetate) in parallel with Al accumulation in cells. At the same time, Al toxicity caused depletion of important macronutrients like Ca, which is important for cell-wall structure. Analysis of antioxidant enzymatic activities in Al-treated Scenedesmus cells revealed that catalase, ascorbate peroxidase, as well as different isoforms of superoxide dismutase were inhibited especially at the highest Al dose (100 μM), cells that accumulated the highest concentration of Al. On the other hand, glutathione reductase activity increased at that Al concentration. Immunodetection after Western-blotting confirmed that only ascorbate peroxidase inhibition was apparently due to a decrease in enzyme levels. However, the inhibition of catalase and activation of glutathione reductase activities seemed related with post-translational modifications in protein function as protein expression decreased or increased, respectively under Al stress. Our results may help to understand toxic mechanisms triggered by Al in freshwater microalgae, which in turn could aid to select suitable biomarkers of Al contamination in aquatic ecosystems.

Environment-enhancing process for algal wastewater treatment, heavy metal control and hydrothermal biofuel production: A critical review

Coupling algae growth on wastewater with hydrothermal liquefaction (HTL) is regarded as an environment-enhancing pathway for wastewater management, biomass amplification, sustainable energy generation and value-added products generation. Through this integrated pathway, microalgae can not only recover nitrogen and phosphorus, but also absorb heavy metals from the wastewater. The migration and transformation of heavy metals need to be specifically assessed and considered due to the environmental concerns associated with metal toxicity. This work reviewed recent advances with respect to bioremediation mechanisms. Particular emphasis was placed on the heavy metal migration, transformation, and the key factors involved in algal wastewater treatment and biomass conversion. Additionally, the challenges of coupling algae wastewater treatment, hydrothermal conversion, and heavy metal control were addressed. Finally, a paradigm involving enhanced algal wastewater treatment and bioenergy production for field application was proposed.

Immobilization of mercury using high-phosphate culture-modified microalgae

This study developed a novel Hg(II) immobilization strategy by firstly incubating algal cells in high-phosphate cultures for surface modification, followed by obtaining the P-rich biomass as adsorbents for enhanced Hg(II) removal and then charring the Hg-loaded biomass to prevent leaching of phosphate and to immobilize Hg(II). For algal surface modification, Scenedesmus obtusus XJ-15 were cultivated under different P concentrations and obtained the highest sites concentration of surface phosphoryl functional groups in 80 mg L^-1 P cultures. For Hg(II) adsorption, biomass from 80 mg L^-1 P cultures (B-80) achieved the highest saturated sorption capacity of 95 mg g^-1 fitting to Langmuir isotherm model under the optimum pH of 5.0. For charring stabilization, the Hg-loaded B-80 was calcinated under different temperatures, and the product obtained from 300 °C charring showed the lowest Hg(II) leaching rate without P release. Moreover, FT-IR and XPS analysis indicate that the surge of surface phosphoryl functional groups dominated the enhancement of Hg(II) sorption and also Hg(II) charring immobilization. The above results suggested that the developed strategy is promising for both phosphate and mercury removal from water and for co-immobilization of P and Hg(II) to prevent leaching.

Combined Confocal Laser Scanning Microscopy Techniques for A Rapid Assessment of the Effect and Cell Viability of Scenedesmus sp. DE2009 Under Metal Stress

Phototrophic microorganisms are the dominant populations in microbial mats, which play an important role in stabilizing sediments, such as happens in the Ebro Delta. These microorganisms are exposed to low metal concentrations over a long period of time. Distinct methods have been used to evaluate their toxic effect on the preservation of these ecosystems. Nevertheless, most of these techniques are difficult to apply in isolated phototrophs because (i) they usually form consortia with heterotrophic bacteria, (ii) are difficult to obtain in axenic cultures, and (iii) do not grow on solid media.In this study, and for the first time, a combination of fast, non-invasive, and in vivo Confocal Laser Scanning Microscopy (CLSM) techniques were applied in a consortium of Scenedesmus sp. DE2009 to analyze its physiological state and viability under metal stress conditions. Microalga was more resistant to Pb followed by Cr and Cu. However, in multimetal combinations, the presence of Cu negatively affected microalga growth. Additionally, the inhibitory concentration (IC) values were also calculated by CLSM pigment analysis. The result determines a higher degree of toxicity for Cu and Cr in comparison to Pb. The high sensitivity of these CLSM-methods to detect low concentrations allows consideration of Scenedesmus sp. DE2009 as a good bioindicator of metal pollution in natural environments.

Scaling-up of wastewater bioremediation by Tetradesmus obliquus, sequential bio-treatments of nutrients and metals

Microalgae may be exploited in water or wastewater treatment facilities to reduce excess concentrations of nutrients and metals to comply with regulatory limits. In this study, we characterized the growth and phosphorus (P) removal capacity of an isolated strain of Tetradesmus obliquus VRUC280. Investigations were carried out from laboratory scale (50 mL) up to a 100 L outdoor photobioreactor (PBR). After 10 days, batch cultures removed up to 74% of the media P, while in the PBR, 95% removal was achieved within five days. The harvested biomass was then inactivated (freeze-dried) and used for metal adsorption tests, employing solutions containing 6.0 mg Cu L^-1 or 4.8 mg Ni L^-1. Metal removal rates were evaluated after 15, 30, 60 and 120 min by the analysis of liquid and biomass metal contents. For the latter, a specific biomass digestion method was developed. Cu removal ranged between 50% and 65%, while for Ni, removal varied between 30% and 50%. 300-400 mg Cu Kg DW^-1 and 130-250 mg Ni Kg DW^-1 were rapidly adsorbed on the cell surface of T. obliquus (ca. 15-30 min incubations). This study demonstrates the potential of microalgae, in this case T. obliquus, to remove sequentially P and metals from aqueous media.

Potential of acid-tolerant microalgae, Desmodesmus sp. MAS1 and Heterochlorella sp. MAS3, in heavy metal removal and biodiesel production at acidic pH

Metals in traces are vital for microalgae but their occurrence at high concentrations in habitats is a serious ecological concern. We investigated the potential of two acid-tolerant microalgae, Desmodesmus sp. MAS1 and Heterochlorella sp. MAS3, isolated from neutral environments, for simultaneous removal of heavy metals such as copper (Cu), iron (Fe), manganese (Mn) and zinc (Zn), and production of biodiesel when grown at pH 3.5. Excepting Cu, the selected metals at concentrations of 10-20 mg L^-1 supported good growth of both the strains. Cellular analysis for metal removal revealed the predominance of intracellular mechanism in both the strains resulting in 40-80 and 40-60% removal of Fe and Mn, respectively. In-situ transesterification of biomass indicated enhanced biodiesel yield with increasing concentrations of metals suggesting that both these acid-tolerant microalgae may be the suitable candidates for simultaneous remediation, and sustainable biomass and biodiesel production in environments like metal-rich acid mine drainages.

Microalgae biomass from swine wastewater and its conversion to bioenergy

Ever-increasing swine wastewater (SW) has become a serious environmental concern. High levels of nutrients and toxic contaminants in SW significantly impact on the ecosystem and public health. On the other hand, swine wastewater is considered as valuable water and nutrient source for microalgae cultivation. The potential for converting the nutrients from SW into valuable biomass and then generating bioenergy from it has drawn increasing attention. For this reason, this review comprehensively discussed the biomass production, SW treatment efficiencies, and bioenergy generation potentials through cultivating microalgae in SW. Microalgae species grow well in SW with large amounts of biomass being produced, despite the impact of various parameters (e.g., nutrients and toxicants levels, cultivation conditions, and bacteria in SW). Pollutants in SW can effectively be removed by harvesting microalgae from SW, and the harvested microalgae biomass elicits high potential for conversion to valuable bioenergy.

Utilization of Non-Living Microalgae Biomass from Two Different Strains for the Adsorptive Removal of Diclofenac from Water

In the present work, the adsorptive removal of diclofenac from water by biosorption onto non-living microalgae biomass was assessed. Kinetic and equilibrium experiments were carried out using biomass of two different microalgae strains, namely Synechocystis sp. and Scenedesmus sp. Also, for comparison purposes, a commercial activated carbon was used under identical experimental conditions. The kinetics of the diclofenac adsorption fitted the pseudo-second order equation, and the corresponding kinetic constants indicating that adsorption was faster onto microalgae biomass than onto the activated carbon. Regarding the equilibrium results, which mostly fitted the Langmuir isotherm model, these pointed to significant differences between the adsorbent materials. The Langmuir maximum capacity (Qmax) of the activated carbon (232 mg∙g−1) was higher than that of Scenedesmus sp. (28 mg∙g−1) and of Synechocystis sp. (20 mg∙g−1). In any case, the Qmax values determined here were within the values published in the recent scientific literature on the utilization of different adsorbents for the removal of diclofenac from water. Still, Synechocystis sp. showed the largest KL fitted values, which points to the affinity of this strain for diclofenac at relative low equilibrium concentrations in solution. Overall, the results obtained point to the possible utilization of microalgae biomass waste in the treatment of water, namely for the adsorption of pharmaceuticals.

Optimisation of Tray Drier Microalgae Dewatering Techniques Using Response Surface Methodology

The feasibility of the application of a tray drier in dewatering microalgae was investigated. Response surface methodology (RSM) based on Central Composite Design (CCD) was used to evaluate and optimise the effect of air temperature and air velocity as independent variables on the dewatering efficiency as a response function. The significance of independent variables and their interactions was tested by means of analysis of variance (ANOVA) with a 95% confidence level. Results indicate that the air supply temperature was the main parameter affecting dewatering efficiency, while air velocity had a slight effect on the process. The optimum operating conditions to achieve maximum dewatering were determined: air velocities and temperatures ranged between 4 to 10 m/s and 40 to 56 °C respectively. An optimised dewatering efficiency of 92.83% was achieved at air an velocity of 4 m/s and air temperature of 48 °C. Energy used per 1 kg of dry algae was 0.34 kWh.

Supercritical water gasification of microalgae over a two-component catalyst mixture

Supercritical water gasification (SCWG) of the microalga Chlorella pyrenoidosa was examined with a catalyst mixture of Ru/C and Rh/C in a mass ratio of 1:1. The influences of temperature (380-600°C), water density (0-0.197g/cm³), and catalyst loading (0-20wt%) on the yields and composition of the gaseous products and the gasification efficiency were examined. The temperature and water density significantly affected the SCWG of the microalgae. The hydrogen gasification efficiency was more dependent on the temperature, while the carbon gasification efficiency was more dependent on the water density. The gaseous products mainly consisted of CH₄, H₂, CO, and CO₂, with smaller amounts of C₂-C₃ hydrocarbons. CH₄ made up half of the mole fraction of the gaseous products under most reaction conditions. A synergistic effect between Ru/C and Rh/C existed during the SCWG of the microalgae, and this effect favored the production of CH₄. The role of the catalyst mixture became indistinct at higher temperatures. Hydrogen atoms from the water were transferred to the gaseous products during the SCWG, leading to hydrogen gasification efficiencies that exceeded 100%. The main components of the bio-oil were aromatics and nitrogen-containing compounds, and the main aromatics consisted of azulene and anthracene. The nitrogen-containing compounds are potential poisons to the catalyst mixture.

Phosphorus and metal removal combined with lipid production by the green microalga Desmodesmus sp.: An integrated approach

This work focused on the potential of Desmodesmus sp. to be employed for wastewater bioremediation and biodiesel production. The green microalga was grown in a culture medium with a phosphorus (P) content of 4.55 mg L^-1 simulating an industrial effluent; it was also exposed to a bimetal solution of copper (Cu) and nickel (Ni) for 2 days. P removal was between 94 and 100%. After 2 days of exposure to metals, 94% of Cu and 85% of Ni were removed by Desmodesmus sp. Adsorption tests showed that the green microalga was able to remove up to 90% of Cu and 43% of Ni in less than 30 min. The presence of metals decreased the lipid yield, but biodiesel quality from the biomass obtained from metal exposed samples was higher than that grown without metals. This result revealed that this technology could offer a new alternative solution to environmental pollution and carbon-neutral fuel generation.