Sorption of ionic and nonionic organic solutes onto giant Miscanthus-derived biochar from methanol-water mixtures

Thermo-chemical behaviour of Dunaliella salina biomass and valorising their biochar for naphthalene removal from aqueous rural environment

Thermo-chemical behavior of a microalgal biomass; Dunaliella salina was investigated through thermo-gravimetric analyses. Fully-grown D. salina biomass were subjected for biochar conversion using pyrolytic treatment at three distinct heating rates such as 2.5, 5, and 15 °C min-1. The kinetic appraisals were explained by using model-free kinetics viz., Kissinger-Akahira-Sanose, Flynn-Waal-Ozawa and Starink iso-conversional correlations with concomitant evaluation of activation energies (Ea). The Ea value is 194.2 kJ mol-1 at 90% conversion in FWO model, which is higher as compared to other two models. Moisture, volatile substances, and other biochemical components of the biomass were volatilized between 400 and 1000 K in two separate thermo-chemical breakdown regimes. Microscopic and surface characterization analyses were carried out to elucidate the elemental and morphological characteristics of the biomass and biochar. Further, the proficiency of the prepared biochar was tested for removing naphthalene from the watery media. The novelty of the present study lies in extending the applicability of biochar prepared from D. salina for the removal of a model polyaromatic hydrocarbon, naphthalene.

Biochar-based materials as remediation strategy in petroleum hydrocarbon-contaminated soil and water: Performances, mechanisms, and environmental impact

Petroleum contamination is considered as a major risk to the health of humans and environment. Biochars as low-cost and eco-friendly carbon materials, have been widely used for the removal of petroleum hydrocarbon in the environment. The purpose of this paper is to review the performance, mechanisms, and potential environmental toxicity of biochar, modified biochar and its integration use with other materials in petroleum contaminated soil and water. Specifically, the use of biochar in oil-contaminated water and soil as well as the factors that could influence the removal ability of biochar were systematically evaluated. In addition, the modification and integrated use of biochar for improving the removal efficiency were summarized from the aspects of sorption, biodegradation, chemical degradation, and reusability. Moreover, the functional impacts and associated ecotoxicity of pristine and modified biochars in various environments were demonstrated. Finally, some shortcoming of current approaches, and future research needs were provided for the future direction and challenges of modified biochar research. Overall, this paper gain insight into biochar application in petroleum remediation from the perspectives of performance enhancement and environmental sustainability.

Carbon-based adsorbents for the mitigation of polycyclic aromatic hydrocarbon: a review of recent research

Accumulation of polycyclic aromatic hydrocarbons (PAH) poses significant dangers to the environment and human health. The advancement of technology for cleaning up PAH-contaminated environments is receiving more attention. Adsorption is the preferred and most favorable approach for cleaning up sediments polluted with PAH. Due to their affordability and environmental friendliness, carbonaceous adsorbents (CAs) have been regarded as promising for adsorbing PAH. However, adsorbent qualities, environmental features, and factors may all significantly impact how well CAs remove PAH. According to growing data, CAs, most of which come from laboratory tests, may be utilized to decontaminate PAH in aquatic setups. However, their full potential has not yet been established, especially concerning field applications. This review aims to concisely summarize recent developments in CA, PAH stabilization processes, and essential field application-controlling variables. This review analysis emphasizes activated carbon, biochar, Graphene, carbon nanotubes, and carbon-nanomaterials composite since these CAs are most often utilized as adsorbents for PAH in aquatic systems.

Sorption behavior of three aromatic acids (benzoic acid, 1-naphthoic acid and 9-anthroic acid) on biochar: Cosolvent effect in different liquid phases

Influence of the cosolvent on the sorption of organic acids on biochar has not been well understood. For this purpose, the sorption (log Km, L kg-1) of three aromatic acids (benzoic acid (BA, pKa = 4.20), 1-naphthoic acid (1-NAPA, pKa = 3.70), and 9-anthroic acid (9-ANTA, pKa = 3.65) was evaluated as a function of methanol volume fraction (fc = 0.0, 0.25, and 0.5), liquid pH (2.5 and 7.0), ionic composition (CaCl2 and KCl) and ionic strength (0.005 M, 0.5 M, and 1 M CaCl2). A giant Miscanthus-derived biochar (ZPC of 2.86) was used as the sorbent. For all solutes, the sorption coefficients (log Km) measured at pH 2.5 (i.e., pH < pKa) tended to decrease with increasing fc, as expected from the cosolvency model, while the result obtained at pH 7.0 was not fully explained by the same model. The log Km of 1-NAPA in the CaCl2 system was always greater than in the KCl system (p < 0.05) and the impact became pronounced at high pH (>pKa) with increasing fc. Increasing the Ca2+ concentration at fc = 0.0 (from 0.005 M to 1 M) enhanced the value by 0.32 log unit of Km. These phenomena indicate a significant role of dissolved Ca2+ in the liquid phase, most likely due to the formation of cation bridges between aromatic carboxylates and the biochar surface (i.e., [R-COO--Ca2+]-{Biochar-}). A decrease in the dielectric constant of the methanol mixture could fortify the formation of this bridge. Regardless of the degree of cosolvency power (σ), as the number of aromatic rings of solutes increases, Km decreases in the order BA > 1-NAPA > 9-ANTA, where fc = 0.0. In conclusion, the sorption potential of biochar can be significantly weakened by increasing pH and fc, and in the absence of a divalent cation.

Influence of Miscanthus Rhizome Pyrolysis Operating Conditions on Products Properties

Waste from the Miscanthus production cycle may be a promising source of material for the pyrolysis and biochar production. The biochar can be used to enrich the soil on which the crop grows, thus increasing productivity. A sample of Miscanthus rhizomes was used as a raw material in a series of experiments in order to find the most suitable conditions for the preparation of biochar. Miscanthus biochar was prepared in a laboratory unit using four different temperatures (i.e., 400, 500, 600 and 700 °C). All pyrolysis products were subsequently evaluated in terms of their quality and product yields were determined. For a temperature of 600 °C and a residence time of 2 h, the appropriate properties of biochar were achieved and the process was still economical. The biochar contained a minimal number of polycyclic aromatic hydrocarbons and a high percentage of carbon. Surface area was measured to be 217 m2/g. The aqueous extract of biochar was alkaline.

Characteristics of Cu(II)-modified aerobic granular sludge biocarbon in removal of doxycycline hydroxide

In this study, the biocarbon derived from aerobic granular sludge with different nutritive proportions was modified by Cu(NO₃)₂•3H₂O (Cu-BC) to improve its adsorption capacity of doxycycline hydrochloride (DOX). The surface area, pores, functional groups, and element composition of biocarbon were characterized by scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) surface area, X-ray photoelectron spectrometer, X-ray diffraction (XRD), the X-ray photoelectron spectrometer, and Fourier transform infrared spectrometry (FT-IR), respectively. Effects of DOX concentration, initial pH, and background electrolyte on adsorption effects of composite were analyzed. Furthermore, the adsorption kinetics, isotherm, thermodynamics, and diffusion model were investigated. Results demonstrated that biocarbons which were prepared with aerobic granular sludge under different nutritive proportions presented different performances. The BET specific surface area of Cu-NaAC/AGS-BC was 260.1592 m²/g, and the micropore volume was 0.054101 cm³/g. The BET specific surface area of Cu-GLC /AGS-BC was only 10.6821 m²/g, and the micropore volume was 0.008687 cm³/g. Both kinds of modified biochar contain a large number of oxygen-containing functional groups. The highest adsorption efficiency of Cu-BC could reach 99.54%. The adsorption of DOX on two modified biocarbons conforms to the pseudo-second-order dynamic model and Temkin isothermal model.

Changes in surface characteristics and adsorption properties of 2,4,6-trichlorophenol following Fenton-like aging of biochar

Fenton-like system formed in a natural soil environment deemed to be significant in the aging process of biochar. Aged biochars have distinct physico-chemical and surface properties compared to non-aged biochar. The aged biochar proved to be useful soil amendment due to its improved elements contents and surface properties. The biochar aging process resulted in increased surface area and pore volume, as well as carbon and oxygen-containing functional groups (such as C=O, –COOH, O–C=O etc.) on its surface, which were also associated with the adsorption behavior of 2,4,6-trichlorophenol (2,4,6-TCP). The biochar aging increased the adsorption capacity of 2,4,6-TCP, which was maximum at pH 3.0. The 2,4,6-TCP adsorption capacity of aged-bush biochar (ABB) and aged-peanut shell biochar (APB) was increased by 1.0–11.0% and 7.4–38.8%, respectively compared with bush biochar (BB) and peanut shell biochar (PB) at the same initial concentration of 2,4,6-TCP. All biochars had similar 2,4,6-TCP desorption rates ranging from 33.2 to 73.3% at different sorption temperatures and times. The desorbed components were mainly 2,4,6-TCP and other degraded components, which were low in concentration with small molecule substance. The results indicated that the aged-biochar could be effective for the long-term remediation of naturally organic polluted soils.

The enhancement of reactive red 24 adsorption from aqueous solution using agricultural waste-derived biochar modified with ZnO nanoparticles

In this study, two types of agricultural wastes, sugarcane bagasse (SB) and cassava root husks (CRHs), were used to fabricate biochars. The pristine biochars derived from SB and CRHs (SBB and CRHB, respectively) were modified using ZnO nanoparticles to generate modified biochars (SBB-ZnO and CRHB-ZnO, respectively) for the removal of Reactive Red 24 (RR24) from stimulated wastewater. Batch experiments were performed to evaluate the effects of ZnO nanoparticles' loading ratio, solution pH, contact time, and initial RR24 concentration on the RR24 adsorption capacity of biochars. The RR24 adsorption isotherm and kinetic data on SBB, SBB-ZnO3, CRHB, and CRHB-ZnO3 were analyzed. Results indicate that SB- and CRH-derived biochars with a ZnO nanoparticle loading ratio of 3 wt% could generate maximum adsorption capacities of RR24 thanks to the double growth on the BET surface of modified biochars. The RR24 adsorption capacities of CRHB-ZnO3 and SBB-ZnO3 reached 81.04 and 105.24 mg g-1, respectively, which were much higher than those of pristine CRHB and SBB (66.19 and 76.14, respectively) at an initial RR24 concentration of 250 mg L-1, pH 3, and contact time of 60 min. The adsorption of RR24 onto biochars agreed well with the pseudo-first-order model and the Langmuir isotherm. The RR24 adsorption capacity on modified biochars, which were reused after five adsorption-desorption cycles showed no insignificant drop. The main adsorption mechanisms of RR24 onto biochars were controlled by electrostatic interactions between biochars' surface positively charged functional groups with azo dye anions, pore filling, hydrogen bonding formation, and π-π interaction.

Activation of grapefruit derived biochar by its peel extracts and its performance for tetracycline removal

A novel adsorbent derived from grapefruit peel (GP) based biochar (GPBC) was synthesized by combined carbonization of GP and subsequent activation by GP extracts. Compared to biochar without extracts activation, the technique granted GPBC-20 (with 1:20 of solid-solution ratio) more abundant surface functional groups, which exerts the adsorbent superior performance for tetracycline (TC) adsorption (37.92 mg/g v.s. 16.64 mg/g). The adsorption kinetics, isotherms and thermodynamics models were further used to evaluate the adsorption behavior of GPBC. The enhanced adsorption was analyzed by characterization of fresh and used GPBC, revealing that the adsorption mechanism was comprised of pore filling, charge interaction and chemical bonding. The comprehensive investigation of using agricultural waste extracts as activator to prepare its raw materials-based adsorbents may be of great significance for enhanced resource utilization.

ZnCl2 modified biochar derived from aerobic granular sludge for developed microporosity and enhanced adsorption to tetracycline

In this study, biochar derived from aerobic granular sludge was modified by ZnCl₂ (Zn-BC) to improve the adsorption performance of tetracycline (TC). The surface area, pores, and functional groups of Zn-BC were characterized by scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) surface area, Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) and the effects of initial pH, TC concentration, and temperature on TC adsorption performance were analyzed. At the same time, the adsorption kinetics, isotherms, thermodynamics and diffusion models were studied. The results showed that the BET surface area and micropore volume of Zn-BC were 852.41 m²·g^-1 and 0.086 cm³·g^-1, respectively. The maximum adsorption performance of TC was 93.44 mg·g^-1, and it was less influenced by pH. The adsorption of TC on Zn-BC agreed well with the pseudo-second-order model and the Langmuir isotherm. The thermodynamic parameters indicated that the adsorption process was a spontaneously endothermic reaction.

Sorption of tetracycline on H3PO4 modified biochar derived from rice straw and swine manure

Currently, the information about the sorption of tetracycline (TC) on animal manure derived biochar was rare although plant residue derived biochar showed high sorption of TC). Therefore, this study explored the sorption of TC on swine manure derived biochar, and compared with rice straw derived biochar simultaneously. Also, H₃PO₄ was adopted to modify both types of biochar. The sorption kinetic and isotherm data showed H₃PO₄ modification enhanced the sorption of TC on both types of biochar (especially swine-manure-biochar), and indicated the chemisorptions including H-bonding and π-π electron donor acceptor interaction might be the primary mechanism. Moreover, the strengthened electrostatic attraction between TC and biochars might largely explain the enhanced sorption capacity of TC along with pH increasing from 5.0 to 9.0. At the same conditions, swine manure derived biochar demonstrated lower sorption capacity of TC than rice straw biochar, but still could be good material for the sorption of TC.