Enhanced performance and microbial community analysis of bioelectrochemical system integrated with bio-contact oxidation reactor for treatment of wastewater containing azo dye

Frequency-modulated alternating current-driven bioelectrodes for enhanced mineralization of Alizarin Yellow R

The alternating current (AC)-driven bioelectrochemical process, in-situ coupling cathodic reduction and anodic oxidation in a single electrode, offers a promising way for the mineralization of refractory aromatic pollutants (RAPs). Frequency modulation is vital for aligning reduction and oxidation phases in AC-driven bioelectrodes, potentially enhancing their capability to mineralize RAPs. Herein, a frequency-modulated AC-driven bioelectrode was developed to enhance RAP mineralization, exemplified by the degradation of Alizarin Yellow R (AYR). Optimal performance was achieved at a frequency of 1.67 mHz, resulting in the highest efficiency for AYR decolorization and subsequent mineralization of intermediates. Performance declined at both higher (3.33 and 8.30 mHz) and lower (0.83 mHz) frequencies. The bioelectrode exhibited superior electron utilization, bidirectional electron transfer, and redox bifunctionality, effectively aligning reduction and oxidation processes to enhance AYR mineralization. The 1.67 mHz frequency facilitated the assembly of a collaborative microbiome dedicated to AYR bio-mineralization, characterized by an increased abundance of functional consortia proficient in azo dye reduction (e.g., Stenotrophomonas and Shinella), aromatic intermediates oxidation (e.g., Sphingopyxis and Sphingomonas), and electron transfer (e.g., Geobacter and Pseudomonas). This study reveals the role of frequency modulation in AC-driven bioelectrodes for enhanced RAP mineralization, offering a novel and sustainable approach for treating RAP-bearing wastewater.

Pre-exposure of Triclosan compromise tetracycline-derived antibiotic resistance in methanogenic digestion microbiome

Triclosan (TCS) and tetracycline (TC) are commonly detected antibacterial agents in sewage and environment matrices. Nonetheless, the impact of sequential exposure to TCS and TC on the methanogenic digestion microbiome remains unknown. In this study, TCS was shown to reduce COD removal efficiency to 69.8%, but alleviated the inhibitive effect of consequent TC-amendment on the digestion microbiome. Interestingly, TCS pre-exposure resulted in abundance increase of acetotrophic Methanosaeta to 2.68%, being 2.91 folds higher than that without TCS amendment. Microbial network analyses showed that TCS pre-exposure caused microorganisms to establish a co-ecological relationship against TC disturbance. Further analyses of total antibiotic resistance genes (ARGs) showed the TCS-derived compromise of TC-induced ARGs enrichment in digestion microbiomes, e.g., 238.2% and 152.1% ARGs increase upon TC addition in digestion microbiomes without and with TCS pre-exposure, respectively. This study provides new insights into the impact of antibacterial agents on the methanogenic digestion microbiome.

Unlocking water potential in drylands: Quicklime and fly ash enhance soil microbiome structure, ecological networks and function in acid mine drainage water-irrigated agriculture

In water-stressed regions, treated acid mine drainage (AMD) water for irrigated agriculture is a potential solution to address freshwater scarcity. However, a significant knowledge gap exists on the short and long-term effects of treated AMD water on soil health. This study used high-throughput Illumina sequencing and predictive metagenomic profiling to investigate the impact of untreated AMD (AMD), quicklime- (A1Q and A2Q) and quicklime and fly ash-treated AMD water (AFQ) irrigation on soil bacterial diversity, co-occurrence networks and function. Results showed that untreated AMD water significantly increased soil acidity, electrical conductivity (EC), sulfate (SO42-), and heavy metals (HM), including reduced microbial diversity, disrupted interaction networks, and functional capacity. pH, EC, Cu, and Pb were identified as key environmental factors shaping soil microbial diversity and structure. Predominantly, Pseudomonas, Ralstonia picketti, Methylotenera KB913035, Brevundimonas vesicularis, and Methylobacteriumoryzae, known for their adaptability to acidic conditions and metal resistance, were abundant in AMD soils. However, soils irrigated with treated AMD water exhibited significantly reduced acidity (pH > 6.5), HM and SO42- levels, with an enrichment of a balanced bacterial taxa associated with diverse functions related to soil health and agricultural productivity. These taxa included Sphingomonas, Pseudoxanthomonas, Achromobacter, Microbacterium, Rhodobacter, Clostridium, Massillia, Rhizobium, Paenibacillus, and Hyphomicrobium. Moreover, treated AMD water contributed to higher connectivity and balance within soil bacterial co-occurrence networks compared to untreated AMD water. These results show that quicklime/fly ash treatments can help lessen impacts of AMD water on soil microbiome and health, suggesting its potential for irrigated agriculture in water-scarce regions.

Tetracycline hydrochloride degradation in polarity inverted microbial fuel cells: Performance, mechanisms and microbiology

Tetracycline antibiotics are widely used in veterinary medicine, human therapy and agriculture, and their presence in natural water raises environmental concerns. In this study, more than 94% of tetracycline hydrochloride (TCH) could be rapidly degraded within 48 h in polarity-inverted microbial fuel cells. The electrochemically active bacteria had the best electrochemical performance at 1 mg/L of TCH with the minimum internal resistance of 77.38 Ω. The electron-rich functional groups of TCH were continuously attacked and finally degradated into small molecules in three possible degradation pathways. Microbial community structure analysis showed that Comamonas and Shinella were enriched at the electrode as polarity-inverted bacteria. Genomic analysis showed that both direct and indirect electron transfer participated in the degradation of TCH in polarity-inverted microbial fuel cell (MFC) and the functional genes related to electrical conductivity in polarity-inverted MFC were more enriched on the electrode surface than non-polarity-inverted MFC. This study can facilitate further investigations about the biodegradation of TCH in polarity-inverted microbial fuel cell.

Performance and mechanism of azo dyes degradation and greenhouse gases reduction in single-chamber electroactive constructed wetland system

A single-chamber microbial fuel cell-microbial electrolytic cell with a novel constructed wetland system was proposed for synergistic degradation of congo red and reduction in emissions of greenhouse gases. The closed-circuit system showed higher chemical oxygen demand and congo red removal efficiencies by 98 % and 96 % on average, respectively, than traditional constructed wetland. It could also significantly reduce the emissions of CH₄ and N₂O (about 52 % CO₂-equivalents) by increasing the electron transfer. Microbial community analysis demonstrated that the progressive enrichment of dye-degrading microorganisms (Comamonas), electroactive bacteria (Tolumonas, Trichococcus) and denitrifying microorganisms (Dechloromonas) promoted pollutant removal and electron transfer. Based on gene abundance of xenobiotics biodegradation, the congo red biodegradation pathway was described as congo red → naphthalene and alcohols → CO₂ and H₂O. In summary, the single-chamber closed-circuit system could significantly improve the degradation of congo red and reduce the emissions of greenhouse gases by influencing electron transfer and microbial activity.

Analysis of the chloride ion removal mechanism from simulated wastewater by discarded vitamin tablets

Vitamin (VM) tablets are often discarded or incinerated as medical waste, and untreated highly chlorinated wastewater is discharged, polluting the environment. In this study, Cu²⁺ was reduced by vitamin C (VC, a component of VM), and the precipitate formed by the reaction of its product with Cl^- in water was used to remove Cl^- from simulated wastewater. This allows for the resourceful use of waste VM, while also achieving the goal of dechlorinating wastewater. Meanwhile, the effect of various parameters on dechlorination was studied, and the dechlorination mechanism was analyzed. According to the results, the removal rate of Cl^- increased first and then decreased with pH, removal time and reaction temperature. Using VC in VM to dechlorinate simulated wastewater, the removal rate of Cl^- was 94.31% under optimum conditions: pH 2.5, temperature 30 °C and reaction time 10 minutes. According to the dechlorination process, it can be inferred that Cu²⁺ is reduced to Cu⁺ by VC, and Cu⁺ and Cl^- coprecipitate to remove Cl^-. Therefore, it is feasible to use discarded VM to treat high concentration chlorine-containing wastewater.

Synthesis, Characterization, and Solar Photo-Activation of Chitosan-Modified Nickel Magnetite Bio-Composite for Degradation of Recalcitrant Organic Pollutants in Water

Photocatalysis is a promising process for decomposing harmful organic pollutants in water. In this study, solar/photocatalytic degradation of two model azo dyes, i.e., methylene blue (MB) and methyl red (MR), in water usinga nanostructured chitosan-modified nickel magnetite (CS-NM) bio-composite was investigated. The CS-NM bio-composite was synthesized through a co-precipitation method and characterized by Fourier transform infrared (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), thermogravimetry (TGA), and UV-Vis spectroscopy. FTIR analysis showed the uniform incorporation and conjugation of nickel magnetite (NM) into the chitosan (CS) polymer matrix. SEM showed that the average particle size was 0.5 μm. The TGA results revealed the good thermal stability of the prepared bio-composite at 300 °C. The point of zero charge was calculated as 7.5. The effect of water quality and process parameters, such as concentration of dyes, catalyst dose, solution pH, and temperatures, was investigated, for application purposes. The solar/CS-NM photocatalysis resulted in 99 and 96% degradation of individual MB and MR (C0 = 50 ppm), respectively, in 90 min. The degradation of MB and MR by solar/CS-NM photocatalysis followed pseudo-first-order kinetics, with observed rate constants (k) of 0.077 and 0.072 min−1, respectively. The CS-NM photocatalyst showed high recyclability, represented by only a 4–6% loss in the photocatalytic efficiency, after four cycles. The results showed that solar/CS-NM photocatalysis is an efficient technique for degrading recalcitrant organic pollutants, such as azo dyes, in water environments.

A divided flow aerobic-anoxic baffled reactor for simultaneous nitrification-denitrification of domestic wastewater

A novel aerobic-anoxic baffled reactor is designed for the effective denitrification of real domestic wastewater without an external carbon source. The flow is divided between two inlets at the beginning of each zone to provide a carbon source for the denitrifying bacteria. The effects of operating parameters such as the ratio of chemical oxygen demand to nitrogen (COD/N), flow division ratio, and hydraulic retention time (HRT) on the nitrogen removal were investigated. The optimum values of COD/N and HRT were estimated using response surface methodology (RSM) coupled with a central composite experimental design. The addition of porous biomass support media considerably improved the denitrification and removal of COD. Furthermore, the aerobic-anoxic system showed high stability against sudden HRT and COD/N ratio changes. The microbial analysis showed that Alcaligenes, Achromobacter, and Bordetella were the dominant denitrifying bacteria in the anoxic zone, whereas other species coexisted in the aerobic zone.

Safety Assessment of Nanomaterials in Cosmetics: Focus on Dermal and Hair Dyes Products

Nanomaterials use in cosmetics is markedly enhancing, so their exposure and toxicity are important parameters to consider for their risk assessment. This review article provides an overview of the active cosmetic ingredients used for cosmetic application, including dermal cosmetics and also hair dye cosmetics, as well as their safety assessment, enriched with a compilation of the safety assessment tests available to evaluate the different types of toxicity. In fact, despite the increase in research and the number of papers published in the field of nanotechnology, the related safety assessment is still insufficient. To elucidate the possible effects that nanosized particles can have on living systems, more studies reproducing similar conditions to what happens in vivo should be conducted, particularly considering the complex interactions of the biological systems and active cosmetic ingredients to achieve newer, safer, and more efficient nanomaterials. Toward this end, ecological issues and the toxicological pattern should also be a study target.

Electrode Microbial Communities Associated with Electron Donor Source Types in a Bioelectrochemical System Treating Azo-Dye Wastewater

Bioelectrochemical systems (BESs) have been acknowledged to be an efficient technology for refractory pollution treatment. An electron donor is as an indispensable element of BES, and domestic wastewater (DW) has been proved as a cost-efficient and accessible alternative option to expensive carbon sources (such as acetate and glucose), yet its effect on microbial community evolution has not been thoroughly revealed. In this study, the electrode microbial communities from BESs treating azo dye wastewater fed by DW (RDW), acetate (RAc), and glucose (RGlu) were systematically revealed based on 16S rRNA Illumina MiSeq sequencing platform. It was found that there were significant differences between three groups in microbial community structures. Desulfovibrio, Acinetobacter, and Klebsiella were identified as the predominant bacterial genera in RDW, RAc, and RGlu, respectively. Methanosaeta, the most enriched methanogen in all reactors, had a relative lower abundance in RDW. Microbial communities in RAc and RGlu were sensitive to electrode polarity while RDW was sensitive to electrode position. Compared with pure substrates, DW increased the diversity of microbial community and, thus, may enhance the stability of electrode biofilm. This study provides an insight into the microbial response mechanism to the electron donors and provides engineering implications for the development of BES.

A mini review on bio-electrochemical systems for the treatment of azo dye wastewater: State-of-the-art and future prospects

Azo dyes are typical toxic and refractory organic pollutants widely used in the textile industry. Bio-electrochemical systems (BESs) have great potential for the treatment of azo dyes with the help of microorganisms as biocatalysts and have advanced significantly in recent years. However, the latest and significant advancement and achievements of BESs treating azo dyes have not been reviewed since 8 years ago. This review thus focuses on the recent investigations of BESs treating azo dyes from the year of 2013-2020 in order to broaden the knowledge and deepen the understanding in this field. In this review, azo dyes degradation mechanisms of BESs are first elaborated, followed by the introduction of BES configurations with the emphasis on the novelties. The azo dye degradation performance of BESs is then presented to demonstrate their effectiveness in azo dye removal. Effects of various operating parameters on the overall performance of BESs are comprehensively elucidated, including electrode materials, external resistances and applied potentials, initial concentrations of azo dyes, and co-substrates. Predominant microorganisms responsible for degradation of azo dyes in BESs are highlighted in details. Furthermore, the combination of BESs with other processes to further improve the azo dye removal are discussed. Finally, an outlook on the future research directions and challenges is provided from the viewpoint of realistic applications of the technology.

Polyaniline on Stainless Steel Fiber Felt as Anodes for Bioelectrodegradation of Acid Blue 29 in Microbial Fuel Cells

This study investigated the advantages of using low-cost polyaniline-fabricated stainless steel fiber felt anode-based microbial fuel cells (PANI-SSFF-MFCs) for azo dye acid blue 29 (AB29) containing wastewater treatment integrated with an aerobic bioreactor. The findings of electrochemical impedance spectroscopy (EIS) and polarization studies showed that the PANI–SSFF anode considerably decreased the MFC internal resistance. The highest power density of 103 ± 3.6 mW m−2 was achieved by PANI-SSFF-MFCs with a decolorization efficiency of 93 ± 3.1% and a start-up time of 13 days. The final chemical oxygen demand (COD) removal efficiencies for integrated PANI–SSFF–MFC–bioreactor and SSFF–MFC–bioreactor set-ups were 92.5 ± 2% and 80 ± 2%, respectively. Based on 16S rRNA gene sequencing, a substantial microbial community change was observed in MFCs. The majority of sequences were from the Proteobacteria phylum, accounting for 72% and 55% in PANI–SSFF–anodic biofilm and suspension, respectively, and 58 and 45% in SSFF–anodic biofilm and suspension, respectively. The relative abundance of the seven most abundant genera (Pseudomonas, Acinetobacter, Stenotrophomonas, Geothrix, Dysgonomonas, Shinella, and Rhizobiales) was higher in PANI–SSFF–MFCs (46.1% in biofilm and 55.4% in suspension) as compared to SSFF–MFC (43% in biofilm and 40.8% in suspension) which predominantly contributed to the decolorization of AB29 and/or electron transfer. We demonstrate in this work that microbial consortia acclimated to the MFC environment and PANI-fabricated anodes are capable of high decolorization rates with enhanced electricity production. A combined single-chamber MFC (SMFC)-aerobic bioreactor operation was also performed in this study for the efficient biodegradation of AB29.

Establishment of electrochemical treatment method to dye wastewater and its application to real samples

It is of great significance to study the treatment of organic dye pollution. In this work, a method of electrochemical treatment for reactive blue 19 dye (RB19) wastewater system was established, and it was applied to the actual dye wastewater treatment. The effects of applied voltage, electrolyte concentration, electrode spacing, and initial concentration on the removal effect of RB19 have been studied in detail. The results show that the removal rate of RB19 can reach 82.6% and the chemical oxygen demand (CODcr) removal rate is 54.3% under optimal conditions. The removal of RB19 in the system is mainly the oxidation of hydroxyl free radicals. The possible degradation pathway is inferred by ion chromatography: hydroxyl free radicals attack the chromophoric group of RB19 to make it fall off, and then decompose it into ring-opening. The product is finally oxidized to CO2 and water. The kinetic fitting is in accordance with the zero-order reaction kinetics. At the same time, using the established electrochemical system to treat the actual dye wastewater has also achieved good results. After 3 hours of treatment, the CODcr removal rate of the raw water is 44.8%, and the CODcr removal of the effluent can reach 89.5%. The degradation process conforms to the zero-order reaction kinetics. The result is consistent with the electrochemical treatment of RB19.

Photocatalytic Degradation of Single and Binary Mixture of Brilliant Green and Rhodamine B Dyes by Zinc Sulfide Quantum Dots

We present the preparation of octadecylamine-capped ZnS quantum dots from bis(morpholinyldithiocarbamato)Zn(II) complex. The complex was thermolyzed at 130 °C in octadecylamine at different times, to study the effect of reaction time on the morphological and photocatalytic properties of the ZnS quantum dots. Powder X-ray diffraction patterns confirmed a hexagonal wurtzite crystalline phase of ZnS, while HRTEM images showed particle sizes of about 1–3 nm, and energy band gaps of 3.68 eV (ZnS–1), 3.87 eV (ZnS–2), and 4.16 eV (ZnS–3) were obtained from the Tauc plot for the ZnS nanoparticles. The as-prepared ZnS were used as photocatalysts for the degradation of brilliant green, rhodamine B, and binary dye consisting of a mixture of brilliant green-rhodamine B. The highest photocatalytic degradation efficiency of 94% was obtained from ZnS–3 with low photoluminescence intensity. The effect of catalytic dosage and pH of the dyes solution on the photocatalytic process shows that pH 8 is optimal for the degradation of brilliant green, while pH 6.5 is the best for photocatalytic degradation of rhodamine B. The degradation of the binary dyes followed the same trends. The effect of catalytic dosage shows that 1 mg mL⁻¹ of the ZnS nano-photocatalyst is the optimum dosage for the degradation of organic dyes. Reusability studies show that the ZnS quantum dots can be reused five times without a significant reduction in degradation efficiency.

Biogenic sulfide for azo dye decolorization from textile dyeing wastewater

Azo dye is the most versatile class of dyes used in the textile industry. Although the sulfidogenic process shows superiority in the removal of azo dye, the role of biogenic sulfide produced by sulfate-reducing bacteria (SRB) in the decolorization of azo dye is unclear. This study explored the mechanism of biogenic sulfide for removal of a model azo dye (Direct Red 81 (DR 81)) through biotic and abiotic batch tests with analysis of intermediates of the azo dye degradation. The results showed that biogenic sulfide produced from sulfate reduction directly cleaved two groups of azo bond (-NN-), thereby achieving decolorization. Moreover, the decolorization rate was enhanced by nearly 3-fold (up to 42 ± 1 mg/L-hr; removal efficiency > 99%) by adding an external carbon source or elevating the initial azo dye concentration. This study showed that biogenic sulfide plays an essential role in azo dye decolorization and provides a new avenue for the potential application of biogenic sulfide from the sulfidogenic system for the treatment of azo dye-laden wastewater.

Recent advancements in azo dye decolorization in bio-electrochemical systems (BESs): Insights into decolorization mechanism and practical application

Recent advances in bio-electrochemical systems (BESs) for azo dye removal are gaining momentum due to having electrode biocarrier and electro-active bacteria that could stimulate decolorization via extracellular electron transfer. Enhanced decolorization performance is observed in most laboratory studies, indicating the great potential of BESs as an alternative to the traditional biological processes or serving as a pre-/post-processing unit to improve the performance of biological processes. It is proven more competitive in environmental friendly than physicochemical methods. While, the successful application of BESs to azo dye-containing wastewater remediation requires a deeper evaluation of its performance, mechanism and typical attributes, and a comprehensive potential evaluation of BESs practical application in terms of economic analysis and technical optimizations. This review is organized to address BESs as a practical option for azo dye removal by analyzing the decolorization mechanisms and involved functional microorganisms, followed by the comparisons of device configurations, operational conditions, and economic evaluation. It further highlights the current hurdles and prospects for the abatement of azo dyes via BES related techniques.

Biological detoxification and decolorization enhancement of azo dye by introducing natural electron mediators in MFCs

Reactive red 2 (RR2) is a highly recalcitrant and toxic azo dye that can cause the collapse of biological treatment system. Although MFC can decolorize RR2 effectively, its performance is still inevitably affected by toxicity. Anthraquinone can enhance MFCs' performance through mediating electron transfer. In this study, an anthraquinone-rich natural plants (B.rheum (Rheum offcinale Baill)) was extracted and then added to MFCs. The optimal dosage was selected and the enhanced effects were investigated. The results showed that adding 5%(V/V) extract resulted in the optimal performance elevation of MFC. When 5% extract was added together with RR2, 15.63% and 1.33-fold improvement in RR2 decolorization efficiency and rate were achieved compared with the control group. Meanwhile, higher power density (2.75 W/m³), coulombic efficiency (6.45%), and lower internal resistance (233.69 Ω) were also observed when 5% B.rheum extract and RR2 were added. B.rheum extract in MFCs enhanced microbial activity and enriched the dye-degrading microorganisms, such as Enterobacter, Raoultella, Comamonas and Shinella. B.rheum extract acts as "antidote" in alleviating the biotoxicity of RR2 was firstly illustrated in this study. The results provided a new strategy for using plant-source electron mediators to simultaneously improve biological detoxification, bioelectricity generation and dye decolorization in bioelectrochemical system.

Application of macroalgal biomass derived biochar and bioelectrochemical system with Shewanella for the adsorptive removal and biodegradation of toxic azo dye

The present study aimed towards adsorptive removal of the toxic azo dye onto biochar derived from Eucheuma spinosum biomass. Characterization of the produced biochar was performed using X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), and Brunauer-Emmett-Teller (BET). Eucheuma spinosum biochar (ES-BC) produced at 600 °C revealed a maximum adsorption capacity of 331.97 mg/g towards reactive red 120 dye. The adsorption data fitted best to the pseudo-second order kinetics (R² > 0.99) and Langmuir isotherm (R² > 0.98) models. These adsorption models signified the chemisorption mechanism with monolayer coverage of the adsorbent surface with dye molecules. Furthermore, the adsorption process was mainly governed by electrostatic interaction, ion exchange, metal complexation, and hydrogen bonding as supported by the solution pH, FTIR, XPS, and XRD investigation. Nevertheless, alone adsorption technology could not offer a complete solution for eliminating the noxious dyes. Therefore, the bioelectrochemical system (BES) equipped with previously isolated marine Shewanella marisflavi BBL25 was intended for the complete remediation of azo dye. The BES II demonstrated highest dye decolorization (97.06%) within 48 h at biocathode where the reductive cleavage of the azo bond occurred. Cyclic voltammetry (CV) studies of the BES revealed perfect redox reactions taking place where the redox mediators shuttled the electrons to the dye molecule to accelerate the dye decolorization. Besides, the GC-MS analysis revealed biotransformation of the dye into less toxic metabolites as tested using a phyto and cytogenotoxicity.

Effect of waterproof breathable membrane based cathodes on performance and biofilm microbiomes in bioelectrochemical systems

A novel method for fabricating air-cathodes was developed by assembling an activated carbon (AC) catalyst together with a waterproof breathable membrane (WBM) and stainless steel mesh (SSM) to reduce manufacturing costs of bioelectrochemical systems (BESs). WBMs made of different materials were tested in the assembly, including a hybrid of polypropylene and polyolefin (PPPO), polyethylene (PE), and polyurethane (PU), and compared against poly tetrafluoroethylene (PTFE)-based cathodes. Results showed that the maximum power density of the activated carbon-stainless steel mesh-polyurethane (AC@SSM/PU) assembly was 2.03 W/m² while that of conventional carbon cloth cathode assembly (Pt@CC/PTFE) was 1.51 W/m². Compared to conventional cathode fabrication, AC@SSM/PU had a much lower cost and simpler manufacturing process. Illumina Miseq sequencing of 16S rRNA gene amplicons indicated that microbiomes were substantially different between anode and cathode biofilms. There was also a difference in the community composition between different cathode biofilms. The predominant population in the anode biofilms was Geobacter (38-75% relative abundance), while Thauera and Pseudomonas dominated the cathode biofilms. The results demonstrated that different types of air-cathodes influenced the microbial community assembly on the electrodes.

Microbial mechanisms responsible for the variation of soil Cd availability under different pe+pH environments

The objective of this study was to explore potential microbial mechanisms associated with how water management may alter soil Cd availability under changing pe + pH environments. Four water regimes, aerobic [70% MWHC] + dissolved oxygen, aerobic, continuous flooding, and continuous flooding + N₂, were applied to Cd-contaminated soil. The results show that the anoxic treatments were effective in decreasing soil pe + pH and in turn decreased Cd availability and increased soil S and Fe availability relative to those of the aerobic treatments. The decreased pe + pH enriched some anaerobic microorganisms such as those in the families Anaerolineaceae and Geobacteraceae. Conversely, other families, such as Gemmatimonadaceae and Sphingomonadaceae, appeared to be sensitive biomarkers that responded to aerobic treatments. Bacterial community structure and network interactions were altered to strengthen bacterial responses to different pe + pH environments as indicated by phylogenetic molecular ecological network (pMEN) analysis. The majority of predicted functional categories, such as metabolism, cell motility, and membrane transport, were affected by different irrigation regimes as indicated by a functional gene profile analysis. The categories were related to important traits that facilitated acclimation of bacteria to their local environment with altered soil pe + pH. Structural equation models revealed that soil pe + pH contributed significantly to soil enzyme activities and differences in bacterial community and function, and consequently, was responsible for the variation of soil Cd availability and iron or sulfur reduction.

Bioelectrochemical degradation of monoaromatic compounds: Current advances and challenges

Monoaromatic compounds (MACs) are typical refractory organic pollutants which are existing widely in various environments. Biodegradation strategies are benign while the key issue is the sustainable supply of electron acceptors/donors. Bioelectrochemical system (BES) shows great potential in this field for providing continuous electrons for MACs degradation. Phenol and BTEX (Benzene, Toluene, Ethylbenzene and Xylenes) can utilize anode to enhance oxidative degradation, while chlorophenols, nitrobenzene and antibiotic chloramphenicol (CAP) can be efficiently reduced to less-toxic products by the cathode. However, there still have several aspects need to be improved including the scale, electricity output and MACs degradation efficiency of BES. This review provides a comprehensive summary on the BES degradation of MACs, and discusses the advantages, future challenges and perspectives for BES development. Instead of traditional expensive dual-chamber configurations for MACs degradation, new single-chamber membrane-less reactors are cost-effective and the hydrogen generated from cathodes may promote the anode degradation. Electrode materials are the key to improve BES performance, approaches to increase the biofilm enrichment and conductivity of materials have been discussed, including surface modification as well as composition of carbon and metal-based materials. Besides, the development and introduction of functional microbes and redox mediators, participation of sulfur/hydrogen cycling may further enhance the BES versatility. Some critical parameters, such as the applied voltage and conductivity, can also affect the BES performance, which shouldn't be overlooked. Moreover, sequential cathode-anode cascaded mode is a promising strategy for MACs complete mineralization.

Chitosan‑zinc sulfide nanoparticles, characterization and their photocatalytic degradation efficiency for azo dyes

Herein, chitosan‑zinc sulfide nanoparticles (CS-ZnS-NPs) were developed as an efficient photocatalyst for the degradation of toxic dyes. The as-synthesized CS-ZnS-NPs were analyzed using XRD, FTIR, SEM, and EDS. The functional groups of CS-ZnS-NPs were validated with FTIR spectroscopy. The SEM envisaged the average particle size as 40 nm, whereas EDS interpreted the compositional analysis of the nanocomposite. XRD analysis illustrated the crystallinity and hexagonal crystal structure of the CS-ZnS-NPs. The photocatalytic efficiency of CS-ZnS-NPs was evaluated using two carcinogenic azo dyes, Acid Brown 98 and Acid Black 234. A UV lamp (254 nm) was used as an irradiation source during the photocatalytic degradation of dyes. At the optimum conditions, the synthesized CS-ZnS-NPs showed 96.7% degradation for Acid Black 234 in 100 min and 92.6% for Acid Brown 98 in 165 min. The degradation phenomena followed pseudo-first-order kinetics. The values of rate constant (k) were 0.01464 and 0.04096 min^-1 with correlation coefficient (R²) of 0.98891 and 0.99406 for Acid Brown 98 and Acid Black 234, respectively. The CS-ZnS-NPs were easily recovered and recycled for four successive batches. The results showed that CS-ZnS-NPs are considered as highly productive, cost-effective and promising photocatalyst in degrading pollutants in several consecutive cycles.

Electrochemical oxidation of Acid Orange 7 azo dye using a PbO2 electrode: Parameter optimization, reaction mechanism and toxicity evaluation

In this study, electrochemical oxidation of Acid Orange 7 (AO 7) azo dye has been investigated using a Fe-doped PbO₂ electrode. The degradation of AO 7 followed pseudo-first-order reaction kinetics. The removals of AO 7, chemical oxygen demand (COD) and total organic carbon (TOC) were 87.15%, 49.88% and 44.94% after 60 min of electrolysis at the optimal conditions (Na₂SO₄ concentration 0.1 M, initial pH 5, initial AO 7 concentration 100 mg L^-1 and applied current density 20 mA cm^-2), respectively. And the corresponding degradation rate constant was 0.035 min^-1. The intermediates formed during electrochemical process were identified, and a possible degradation pathway was proposed, which was initiated by the oxidation of azo bond (-NN-), hydroxylation and substitution reaction of -NH₂ and -SO₃H under the attack of OH, and ended with the formation of mineralization products such as NH₄⁺, NO₃^-, SO₄^2-, CO₂ and H₂O. The toxicity of treated AO 7 solution towards Vibrio fischeri increased slightly at first and then rapidly reduced to non-toxicity with prolonging time. The results indicate that electrochemical oxidation of AO 7 using Fe-doped PbO₂ electrode is a promising way.

Bacterial degradation of anthraquinone dyes

Anthraquinone dyes, which contain anthraquinone chromophore groups, are the second largest class of dyes after azo dyes and are used extensively in textile industries. The majority of these dyes are resistant to degradation because of their complex and stable structures; consequently, a large number of anthraquinone dyes find their way into the environment causing serious pollution. At present, the microbiological approach to treating printing and dyeing wastewater is considered to be an economical and feasible method, and reports regarding the bacterial degradation of anthraquinone dyes are increasing. This paper reviews the classification and structures of anthraquinone dyes, summarizes the types of degradative bacteria, and explores the possible mechanisms and influencing factors of bacterial anthraquinone dye degradation. Present research progress and existing problems are further discussed. Finally, future research directions and key points are presented.

Study of simultaneous bioremediation of mixed reactive dyes and Cr(VI) containing wastewater through designed experiments

Xenobiotic azo dyes and chromate (Cr(VI)) containing industrial wastewaters cause severe ecological problems. The present bioremediation study aims to treat wastewater containing Cr(VI) ions and mixed azo dyes (reactive red 21 (RR21) and reactive orange 16 (RO16)) by Pseudomonas aeruginosa 23N1. The process optimization of bioremediation is investigated using statistical designed experimental tool of response surface methodology. The ANOVA analysis is performed to evaluate optimal biodecolourization condition. This study shows that the amount of yeast extract has major influence on biodecolourization performance. The decolourization of individual RO16 and RR21 dye in presence of 60 mg/L of Cr(VI) ions is obtained as 88.5 ± 0.8 and 92.3 ± 0.7% for 100 and 150 mg/L initial dye concentrations, respectively. In this study, bacteria exhibit high Cr(VI) removal potential of ~ 99.1% against initial Cr(VI) concentration of 150 mg/L. The negative influence of Cr(VI) ions on biodecolourization is only noticed when initial Cr(VI) concentration in wastewater is found above 150 mg/L. The results reveal that bacteria studied here could be used to biodecolourize dyes even in high saline condition (> 6000 mg/L). The reduction of ~ 80% in American Dye Manufacturers Institute colour index value is achieved for mixed dyes solution containing 50 mg/L of both RR21 and RO16 dyes along with 50 mg/L Cr(VI) ions. Significant changes in the UV-visible and ATR-FTIR spectra are observed in treated water that confirms the biodegradation of dyes. Toxicity study with Vigna radiata reveals the non-toxicity of degraded metabolites and strain 23N1 is recommended as an effective bioremediation agent.

Investigating the role of anodic potential in the biodegradation of carbamazepine in bioelectrochemical systems

Anode potential is a critical factor in the biodegradation of organics in bioelectrochemical systems (BESs), but research on these systems with complex recalcitrant co-substrates at set anode potentials is scarce. In this study, carbamazepine (CBZ) biodegradation in a BES was examined over a wide range of set anode potentials (-200 to +600 mV vs Ag/AgCl). Current generation and current densities were improved with the increase in positive anode potentials. However, at a negative potential (-200 mV), current generation was higher as compared to that for +000 and +200 mV. The highest CBZ degradation (84%) and TOC removal efficiency (70%) were achieved at +400 mV. At +600 mV, a decrease in CBZ degradation was observed, which can be attributed to a low number of active bacteria and a poor ability to adapt to high voltage. This study signified that BESs operated at optimum anode potentials could be used for enhancing the biodegradation of complex and recalcitrant contaminants in the environment.

Nitrogen removal from wastewater via simultaneous nitrification and denitrification using a biological folded non-aerated filter

A conventional biological filter has been shown to be a viable method for removing nitrogenous compounds from wastewater, but it still has many disadvantages. In this study, a biological folded non-aerated filter (BFNAF) was designed, and its feasibility for nitrogen-loaded wastewater treatment has been confirmed. Effects of the HRT and the COD/N ratio on the performance of BFNAF were investigated. Through response surface method, when the COD/N ratio and the HRT were 5.39 and 10.83 h, removal efficiencies of NH₄⁺, COD and TN reached maximum values of 88.62 ± 0.81%, 76.12 ± 0.57%, and 50.48 ± 1.02%, respectively. In addition, it was found that several denitrifying bacteria, such as Azoarcus, Arcobacter, Flavobacterium, along with many ammonia-oxidizing bacteria and nitrite-oxidizing bacteria, co-existed in the community of the biofilm. All the results showed that the BFNAF could realize the simultaneous nitrification and denitrification (SND) process effectively.

Ultrasonic treatment enhances sludge disintegration and degradation in a photosynthetic bacteria-bioelectrochemical system

Excess sludge contains a large amount of organic matter, most of which is present in the form of bacteria and extracellular polymeric substances. In this study, a photosynthetic bioelectrochemical system (BES) combined with ultrasonic treatment (UT) was investigated to mineralize sludge. The sludge was disintegrated by the UT, and the supernatant separated from the treated sludge was further degraded through a bioelectrochemical system containing photosynthetic bacteria (PSB-BES). The UT efficiency was enhanced by supernatant separation. The PSB-BES method effectively improved the degradation of the soluble chemical oxygen demand (SCOD) from the supernatant. The SCOD and protein removal were increased 1.4 and 1.5 times, respectively, compared to BES without PSB. In addition, the effects of several key operating factors including illumination, voltage, and temperature were systematically investigated. This study provides a basis for further development of sludge mineralization processes. PRACTITIONER POINTS: The sludge was disintegrated by the ultrasound treatment. The supernatant separated from treated sludge was further degraded by a bioelectrochemical system combined with photosynthetic bacteria. The ultrasonic treatment efficiency was enhanced by supernatant separation. The PSB-BES method effectively improved the soluble chemical oxygen demand (SCOD) degradation from the supernatant. The effects of several key operating factors including light (dark-photo), voltage, and temperature were systematically investigated.

Accelerated Rhodamine B removal by enlarged anode electric biological (EAEB) with electro-biological particle electrode (EPE) made from steel converter slag (SCS)

Electro-biological particle electrode (EPE) made from steel converter slag (SCS) was used as a particle electrode in an enlarged anode electric biological (EAEB) reactor for Rhodamine B (RhB) wastewater treatment, and its purification performance and microbial community were examined. The results revealed that (1) the EAEB reactor showed much higher average removal rates of RhB, COD and NH₄⁺-N, i.e. 91.68%, 87.63%, and 90.54%, which meant an increase by 59.86%, 20.48%, and 14.22%, respectively, compared with BAF; (2) The optimum current intensity (CI) for simultaneously removing RhB, COD and NH₄⁺-N in the EAEB reactor was at 1.00 A; and (3)Methylophilus, Aeromonas, Pseudomonas, Pelomonas and Zoogloea accounted for the main bacterial community in EAEB. Therefore, the EAEB reactor with EPE produced from steel converter slag (SCS) was suitable to simultaneously remove RhB, COD and NH₄⁺-N.

Performance and microbial community of an electric biological integration reactor (EBIR) for treatment of wastewater containing ibuprofen

Electric biological integration reactor (EBIR) was designed and built for the treatment of wastewater containing ibuprofen. This study evaluates the removal performance of EBIR by comparison with biological aerated filter (BAF), while also discussing the optimal operational parameters of EBIR within the context of the response surface methodology. The results indicate that EBIR exhibits higher average removal rates of ibuprofen, chemical oxygen demand (COD) and NH₄⁺-N, i.e. 93.48%, 86.72% and 85.19%, representing an increase by 61.59%, 14.57% and 10.49%, respectively, compared with BAF. The optimal conditions for EBIR were 12.73 A/m² current density (CD), 3.5 h hydraulic retention time and 0.08 mg/L influent ibuprofen concentration. In addition, microbial community structures were detected using an Illumina Miseq PE300 system, which were different at the phylum, class, and genus levels between EBIR and BAF. The microbial communities of EBIR, including mainly Trichococcus, Aeromonas, Saprospiraceae_uncultured, Thiobacillus, Aeromonas Flavobacterium, Sphingopyxis, Candidate_division_TM7_norank, Acinetobacter and physicochemical properties indirectly confirmed the excellent removal performance at 12.73 A/m² CD.

Sludge degradation and microbial community structures analysis in a microbial electrolysis cell-coupled up flow anaerobic blanket reactor with an ultrasound treatment system

This study proposed a sludge degradation system comprised of: (i) an ultrasound treatment (UT) system to disintegrate sludge; (ii) an up flow anaerobic sludge blanket (UASB) reactor to degrade the disintegrated sludge; and (iii) a microbial electrolysis cell (MEC) in replacement of a three-phase UASB separator to deeply degrade the disintegrated sludge. The influence of the ultrasound power, the temperature, and the voltage on the sludge degradation process was discussed. The experimental results showed that the UT unit effectively promoted sludge disintegration, thereby leading to deterioration of the quality of the reactor effluent. The temperature and the voltage parameters were found to be key for the anaerobic degradation (AD) process within this system. The volatile suspended solid concentration in the effluent was maintained at 320–380 mg L⁻¹ (ca. 0.08 times the raw sludge concentration), thereby validating the utilization of MEC as a three-phase separation unit. The total chemical oxygen demand removal was maintained at 61.3% during 5 days of AD upon intermittent exposure of the sludge to the UT unit, thereby showing that the system can effectively degrade solid organic matter. The bacterial community structure of the raw sludge significantly changed, with the high biodiversity of this system increasing the ecological stability. This system can degrade sludge with high efficiency and could be used in further engineering applications.

This study proposes an ultrasound treatment–up flow anaerobic sludge blanket–microbial electrolysis cell (UT-UASB-MEC) degradation system.