Bacterial community structure in atmospheric particulate matters of different sizes during the haze days in Xi'an, China

Effects and health risk assessments of different spray disinfectants on microbial aerosols in chicken houses

This study aims to explore the effects of spray processes with four different disinfectants on airborne culturable and pathogenic microbial concentrations, microbial community compositions and health risk assessments in chicken houses. Results indicate that compared to the microbial concentrations before spraying, hypochlorous acid, glutaraldehyde-decamethonium bromide and sodium dichloroisocyanate increase culturable bacteria, culturable fungi, airborne Staphylococcus and Candida albicans, respectively. Beyond that, the spray processes with different disinfectants have no significant effects on the microbial concentrations. The total relative abundances (RAs) of the screened out 46 pathogenic bacterial genera decrease after spraying with povidone iodine, while increase after spraying with the other three disinfectants, which is opposite for the 35 pathogenic fungal genera. The core bacterial or fungal genera principally interrelate with each other through cooperation. Ammonia (NH3) concentrations, relative humidity (RH) and temperature (T) influence bacterial communities in aerosols; while fungal communities are mainly affected by T, particulate matters and nitrous oxide (N2O) concentrations. Long-term exposure to aerosols in chicken houses have potential adverse effects on human health and the spray processes with different disinfectants exacerbate the health risks of aerosols via inhalation. Hence, different spray disinfectants cannot significantly reduce the microbial aerosols in real chicken farm environments and the cleaning procedures should be comprehensively reviewed and optimized in livestock and poultry farms.

Airborne fungal communities are more susceptible to anthropogenic activities than bacteria

Airborne microorganisms (AM) have significant environmental and health implications. Extensive studies have been conducted to investigate the factors influencing the composition and diversity of AM. However, the knowledge of AM with anthropogenic activities has not reach a consensus. In this study, we took advantage of the dramatic decline of outdoor anthropogenic activities resulting from COVID-19 lockdown to reveal their associations. We collected airborne particulate matter before and during the lockdown period in two cities. The results showed that it was fungal diversity and communities but not bacteria obviously different between pre-lockdown and lockdown samples, suggesting that airborne fungi were more susceptible to anthropogenic activities than bacteria. However, after the implementation of lockdown, the co-occurrence networks of both bacterial and fungal community became more complex, which might be due to the variation of microbial sources. Furthermore, Mantel test and correlation analysis showed that air pollutants also partly contributed to microbial alterations. Airborne fungal community was more affected by air pollutants than bacterial community. Notably, some human pathogens like Nigrospora and Arthrinium were negatively correlated with air pollutants. Overall, our study highlighted the more impacts of anthropogenic activities on airborne fungal community than bacterial community and advanced the understanding of associations between anthropogenic activities and AM.

Characteristics of psychrophilic bacterial communities and associated metabolism pathways in different environments by a metagenomic analysis

Psychrophilic bacteria, the dominant spoilage organisms in raw milk, secrete heat-stable extracellular proteases and lipases that lead to the decomposition of milk and dairy products. In this study, we investigated psychrophilic bacteria in 165 raw milk samples collected across four seasons and six regions in China using shotgun metagenomic sequencing and traditional culture methods. The isolated psychrophilic bacteria were classified into 40 genera and 185 species. Pseudomonas was the most prevalent, accounting for 51.13 % of the genera, while Lactococcus and Chryseobacterium were also notably abundant (> 6.0 %). Metagenomic sequencing revealed that Pseudomonas (47.9 %), Stenotrophomonas (9.75 %), Sphingomonas (6.73 %), Latilactobacillus (6.38 %) and Lactococcus (5.16 %) were the dominant genera in the raw milk samples. The diversity of psychrophilic bacteria in raw milk was strongly influenced by seasonal variations, with the sampling region being a less significant factor. KEGG annotation indicated that carbohydrate and amino acid metabolism were the primary metabolic pathways in these bacteria. Metagenomic sequencing not only accurately identifies species but also provides functional insights into psychrophilic bacteria in raw milk, aiding in understanding their activities, promoting their control on farms, and ultimately improving raw milk quality.

Effects of Paecilomyces lilacinus and Bacillus pumilus on stem nematode and rhizosphere bacterial communities of sweet potato

Stem nematode (Ditylenchus destructor Thorne) is considered one of the most economically devastating species affecting sweet potato production. Biocontrol offers a sustainable strategy for nematode control. This study conducted a pot experiment to evaluate the biocontrol efficacy of Paecilomyces lilacinus CS-Z and Bacillus pumilus Y-26 against the stem nematode, as well as to examine their influence on the bacterial communities in the sweet potato rhizosphere. The findings indicated that B.pumilus Y-26 and P.lilacinus CS-Z exhibited respective suppression rates of 82.9% and 85.1% against the stem nematode, while also stimulating sweet potato plant growth. Both high-throughput sequencing and Biolog analysis revealed distinct impacts of the treatments on the bacterial communities. At the phylum level, B.pumilus Y-26 enhanced the abundance of Actinobacteria but reduced the abundance of Cyanobacteria, with P.lilacinus CS-Z exhibiting similar effects. Additionally, the treatment with B.pumilus Y-26 resulted in increased abundances of Crossiella, Gaiella, Bacillus, and Streptomyces at the genus level, while the treatment with P.lilacinus CS-Z showed increased abundances of Crossiella and Streptomyces. In contrast, the abundance of Pseudarthrobacter was reduced in the treatment with B.pumilus Y-26. Conversely, the application of the nematicide fosthiazate exhibited minor influence on the bacterial community. The findings indicated that the application of P.lilacinus CS-Z and B.pumilus Y-26 led to an increase in the relative abundances of beneficial microorganisms, including Gaiella, Bacillus, and Streptomyces, in the rhizosphere soil. In conclusion, P.lilacinus CS-Z and B.pumilus Y-26 demonstrated their potential as environmentally friendly biocontrol agents for managing stem nematode disease of sweet potato.

Impact of haze on potential pathogens in surface bioaerosol in urban environments

Air quality considerably affects bioaerosol dynamics within the atmosphere. Frequent haze events, with their associated alterations in bioaerosol composition, may pose potential health risks. This study investigated the microbial diversity, community structure, and factors of PM2.5 within an urban environment. We further examined the impact of haze on potentially pathogenic bacteria in bioaerosols, and analyzed the sources of haze pollution. Key findings revealed that the highest levels of microbial richness and diversity were associated with lightly polluted air conditions. While the overall bacterial community structure remained relatively consistent across different air quality levels, the relative abundance of specific bacterial taxa exhibited variations. Meteorological and environmental conditions, particularly sulfur dioxide, nitrogen dioxide, and carbon monoxide, exerted a greater influence on bacterial diversity and community structure compared to the physicochemical properties of the PM2.5 particles themselves. Notably, haze events were observed to strengthen interactions among airborne pathogens. Stable carbon isotope analysis suggested that coal combustion and automobile exhaust were likely to represent the primary source of haze during winter months. These findings indicate that adoption of clean energy alternatives such as natural gas and electricity, and the use of public transportation, is crucial to mitigate particle and harmful pollutant emissions, thereby protecting public health.

Seasonal distribution of human-to-human pathogens in airborne PM2.5 and their potential high-risk ARGs

Airborne microorganisms, an emerging global health threat, have attracted extensive studies. However, few attentions have been paid to the seasonal distribution of airborne pathogens, in particular their associations with antibiotic resistance genes (ARGs). To this end, two-week daily PM2.5 samples were consecutively collected from Nanchang in four seasons, and the human-to-human pathogens were screened based on high-throughput sequencing. The results showed that there were 20 pathogenic taxa in PM2.5 in Nanchang, and the highest relative abundance of pathogens was observed in winter (5.84%), followed by summer (3.51%), autumn (2.66%), and spring (1.80%). Although more than half of pathogenic taxa were shared by the four seasons, the analysis of similarities showed that pathogenic community was shaped by season (r = 0.16, p < 0.01). Co-occurrence network analysis disclosed significant interactions among pathogens in each season. Moreover, some dominant pathogens such as Plesiomonas shigelloides, Bacteroides fragilis, and Escherichia-Shigella were hub pathogens. In addition, PICRUSt2 predicted that there were 35 high-risk ARG subtypes in PM2.5, and the pathogens had strongly positive correlations with these ARGs. Even some pathogens like Plesiomonas shigelloides, Bacteroides fragilis, Aeromonas, Citrobacter, may be multi-drug resistant pathogens, including beta-lactam, aminoglycosides, chloramphenicol and multi-drug resistances, etc. Both air pollutants and meteorological conditions contributed to the seasonal variation of airborne pathogenic bacteria (r = 0.15, p < 0.01), especially CO, O3, PM2.5, temperature and relative humidity. This study furthers our understanding of airborne pathogens and highlights their associations with ARGs.

Comprehensive analysis of metal(loid)s and associated metal(loid) resistance genes in atmospheric particulate matter

Despite global concerns about metal(loid)s in atmospheric particulate matter (PM), the presence of metal(loid) resistance genes (MRGs) in PM remains unknown. Therefore, we conducted a comprehensive investigation of the metal(loid)s and associated MRGs in PMs in two seasons (summer and winter) in Xiamen, China. According to the geoaccumulation index (Igeo), most metal(loid)s, except for V and Mn, exhibited enrichment in PM, suggesting potential anthropogenic sources. By employing Positive Matrix Factorization (PMF) model, utilizing a dataset encompassing both total and bioaccessible metal(loid)s, along with backward trajectory simulations, traffic emissions were determined to be the primary potential contributor of metal(loid)s in summer, whereas coal combustion was observed to have a dominant contribution in winter. The major contributor to the carcinogenic risk of metal(loid)s in both summer and winter was predominantly attributed to coal combustion, which serves as the main source of bioaccessible Cr. Bacterial communities within PMs showed lower diversity and network complexity in summer than in winter, with Pseudomonadales being the dominant order. Abundant MRGs, including the As(III) S-adenosylmethionine methyltransferase gene (arsM), Cu(I)-translocating P-type ATPase gene (copA), Zn(II)/Cd(II)/Pb(II)-translocating P-type ATPase gene (zntA), and Zn(II)-translocating P-type ATPase gene (ziaA), were detected within the PMs. Seasonal variations were observed for the metal(loid) concentration, bacterial community structure, and MRG abundance. The bacterial community composition and MRG abundance within PMs were primarily influenced by temperature, rather than metal(loid)s. This research offers novel perspectives on the occurrence of metal(loid)s and MRGs in PMs, thereby contributing to the control of air pollution.

Fungal community shows more variations by season and particle size than bacteria

The global concern regarding the health risk associated with airborne microorganisms has prompted research in this field. However, there is a lack of systematic investigation into the particle-size distribution of airborne bacterial and fungal communities associated with seasons, which determines where they are deposited in the human respiratory tract. To address this gap, we conducted a study in Nanchang, located in central China, where we collected both coarse and fine particles during summer and winter seasons. The results demonstrated that microbial community exhibited obvious seasonal and particle-size variations except bacterial community in fine particles. Certain taxa (e.g., Bacteroidales, Ktedonobacterales, Capnodiales) displayed either seasonal and/or particle-size preferences. Furthermore, airborne microorganisms in coarse particles were more sensitive to season and particle size compared to those in fine particles, with fungal community being more susceptible than bacterial community. The susceptibility can be attributed to their high vulnerability to air pollutants and meteorological conditions, primarily PM2.5 and PM10. Additionally, a greater relative abundance of pathogenic fungi was observed in fine particles, even though microbial diversity in coarse particles was noticeably higher than that in fine particles. Furthermore, some predominant pathogens such as Alternaria, Nigrospora, and Escherichia-Shigella not only had particle size and/or seasonal preferences, but also were strongly correlated with environmental factors. This study advances our understanding of atmospheric pathogenic microorganisms and highlights the fungal health threat.

Ambient particle composition and toxicity in 31 major cities in China

Current assessment of air quality or control effectiveness is solely based on particulate matter (PM) mass levels, without considering their toxicity differences in terms of health benefits. Here, we collected a total of 465 automobile air conditioning filters from 31 major Chinese cities to study the composition and toxicity of PM at a national scale. Dithiothreitol assay showed that normalized PM toxicity (NIOG) in different Chinese cities varied greatly from the highest 4.99 × 10-3 for Changsha to the lowest 7.72 × 10-4 for Yinchuan. NIOG values were observed to have significant correlations with annual PM10 concentration (r = -0.416, p = 0.020) and some PM components (total fungi, SO4 2- and calcium element). The concentrations of different elements and water-soluble ions in PM also varied by several orders of magnitude for 31 cities in China. Endotoxin concentrations in PM analyzed using limulus amebocyte lysate assay ranged from 2.88 EU/mg PM (Hangzhou) to 62.82 EU/mg PM (Shijiazhuang) among 31 Chinese cities. Besides, real-time qPCR revealed 10∼100-fold differences in total bacterial and fungal levels among 31 Chinese cities. The concentrations of chemical (water soluble ions and trace elements) and biological (fungi, bacteria and endotoxin) components in PM were found to be significantly correlated with some meteorological factors and gaseous pollutants such as SO2. Our results have demonstrated that PM toxicity from 31 major cities varied greatly up to 6.5 times difference; and components such as fungi and SO4 2- in PM could play important roles in the observed PM toxicity. The city-specific air pollution control strategy that integrates toxicity factors should be enacted in order to maximize health and economic co-benefits. This work also provides a comprehensive view on the overall PM pollution situation in China.

Environmental factors and particle size shape the community structure of airborne total and pathogenic bacteria in a university campus

Given the dense population on university campuses, indoor and outdoor airborne bacterial contamination may lead to the rapid spread of diseases in a university environment. However, there are few studies of the characteristics of airborne and pathogenic bacterial communities in different sites on a university campus. In this study, we collected particulate matter samples from indoor and outdoor locations at a university in Bengbu City, Anhui Province, China, and analyzed the community characteristics of airborne and pathogenic bacteria using a high-throughput sequencing technique. The results showed that the composition of the dominant airborne and pathogenic bacterial communities was consistent among sites at the phylum and genus levels, with differences in their relative abundance. There were significant differences in the structure of the airborne and pathogenic bacterial communities between indoor and outdoor sites (p < 0.05). An analysis of similarities (ANOSIM) indicated that the structure of airborne bacterial communities in indoor sites was influenced by the room occupancy rate, ventilation conditions, and the extent of indoor furnishing (p < 0.05), while the structure of pathogenic bacterial communities was influenced by the number of individuals and spatial dimensions (p < 0.05). The impact of particle size on the structure of airborne and pathogenic bacterial communities was relatively minor. A total of 194 suspected pathogenic bacterial species were identified, accounting for 0.0001-1.3923% of the total airborne bacteria, all of which were conditional pathogens. Among them, Saccharopolyspora rectivirgula, Acinetobacter johnsonii, and Moraxella osloensis exhibited relatively high relative abundance, accounting for 24.40, 16.22, and 8.66% of the total pathogenic bacteria, respectively. Moreover, 18 emerging or re-emerging pathogenic bacterial species with significant implications for human health were identified, although their relative abundance was relatively low (0.5098%). The relative abundance of pathogenic bacteria in indoor environments was significantly higher than outdoors, with the laboratory and dormitory having the highest levels. The findings of this study provide valuable guidance for the prevention and control of airborne bacterial contamination and the associated health risks in both a campus environment and other public spaces with high occupancy rates.

A Three-Wavelength Optical Sensor for Measuring the Multi-Particle-Size Channel Mass Concentration of Thermal Power Plant Emissions

Emissions from thermal power plants have always been the central consideration for environmental protection. Existing optical sensors in thermal power plants usually measure the total mass concentration of the particulate matter (PM) by a single-wavelength laser, bearing intrinsic errors owing to the variation in particle size distribution (PSD). However, the total mass concentration alone cannot characterize all the harmful effects of the air pollution caused by the power plant. Therefore, it is necessary to measure the mass concentration and PSD simultaneously, based on which we can obtain multi-particle-size channel mass concentration. To achieve this, we designed an optical sensor based on the three-wavelength technique and tested its performance in a practical environment. Results showed that the prototype cannot only correctly measure the mass concentration of the emitted PM but also determine the mean diameter and standard deviation of the PSDs. Hence, the mass concentrations of PM10, PM2.5, and PM1 are calculated, and the air pollutants emission by a thermal power plant can be estimated comprehensively.

Pollution characteristics and potential health effects of airborne microplastics and culturable microorganisms during urban haze in Harbin, China

In this study, active sampling technology was used to collect microplastics (MPs) and microorganisms simultaneously on haze days in Harbin, China. Airborne MPs concentrations in Junior high school (162.4 ± 44.6 particles/m3) with high vehicular and pedestrian traffic was higher than those in University (63.2 ± 21.8 particles/m3) and Park (12.8 ± 5.5 particles/m3). More airborne MPs were detected in the night samples than in the morning and noon samples. The majority (69.06 %) of airborne MPs measured less than 100 μm, with fibers (69.4 %) being the predominant form. Polyesters and polyethylene were the dominant polymers. In addition, airborne MPs concentrations were positively correlated with microorganisms and PM10 concentrations, and the health hazards associated with microorganisms and MPs exposure via inhalation far exceeded those associated with skin contact, which can serve as a theoretical foundation for considering MPs as indicators of air quality in the future.

Size-resolved ambient bioaerosols concentration, antibiotic resistance, and community composition during autumn and winter seasons in Qatar

This study investigates the size distribution, microbial composition, and antibiotic resistance (ABR) of airborne bioaerosols at a suburban location in Doha, Qatar between October 2021 and January 2022. Samples were collected using an Andersen six-stage viable cascade impactor and a liquid impinger. Findings showed that the mean bacteria concentration (464 CFU/m3) was significantly higher than that of fungi (242 CFU/m3) during the study period. Both bacteria and fungi were most abundant in the aerodynamic size fractions of 1.10-2.21 μm, with peak concentrations observed in the mornings and lowest concentrations in the afternoons across all size fractions. A total of 24 different culturable species were identified, with the most abundant ones being Pasteurella pneumotropica (9.71%), Pantoea spp. 1 (8.73%), and Proteus penneri (7.77%) spp. At the phylum level, the bacterial community configurations during the autumn and winter seasons were nearly identical as revealed by molecular genomics, with Proteobacteria being the most predominant, followed by Firmicutes, Bacteroidetes, Acidobacteriota, and Planctomycetota. However, there was a significant variation in dominant genera between autumn and winter. The most abundant genera included Sphingomonas, Paraburkholderia, Comamonas, Bacillus, and Lysinibacillus. Several bacterial genera identified in this study have important public health and ecological implications, including the risk of respiratory tract infections. Furthermore, the study found that ABR was highest in December, with bioaerosols exhibiting resistance to at least 5 out of 10 antibiotics, and 100% resistance to Metronidazole in all samples. Metagenomics analysis revealed the presence of various airborne bacteria that were not detected through culture-dependent methods. This study provides valuable insights into the airborne microbial composition, temporal variability and ABR in the Arabian Gulf region.

Differences in microbial community composition and factors affecting different particulate matter during autumn in three cities of Xinjiang, China

Environmental pollution has become an issue of increasing concern in China, owing to the country's rapid economic development. Atmospheric particulate matter (PM) is known to be an important parameter in air quality monitoring; further, bioaerosol forms a crucial component of PM. As the climatic environments in the north and south of Xinjiang, China, are significantly different, here, atmospheric PM samples collected from three cities, Shihezi, Yining, and Tumushuk, located in different directions, were analysed for a better understanding of the spatial distribution patterns of microbial community composition of Xinjiang. The16s rDNA and 18 s rDNA were used to locate bacteria and fungi in PM_2.5, PM₁₀, and total suspended particulate matter (TSP) at the species level and genus level, and the microbial communities with the top 15 abundances were selected for analysis. The reports indicate that the most abundant group in Shihezi and Yining was Cenchrus_americanus, which belongs to Proteobacteria. The remaining 14 dominant species had their own distribution pattern in each city. The most dominant strain in Tumushuk was Bacillus_taeanensis, but this strain was not detected in Yining and Shihezi. Similarly, the most predominant fungus in Tumushuk (Microdorylaimus_miser under Myriophyllum) was not detected in the other two cities. The analysis of the effect of environmental impact factors on bacteria and fungi revealed that the impact factors such as temperature, humidity, and wind speed had a greater effect on microorganisms, while O₃ had a negative correlation with most microorganisms, owing to its toxicity. Overall, the results of this study show that short-range transported air masses have a greater impact on local pollutants and microorganisms.

Colonization Ability of Bacillus subtilis NCD-2 in Different Crops and Its Effect on Rhizosphere Microorganisms

Bacillus subtilis strain NCD-2 is a promising biocontrol agent for soil-borne plant diseases and shows potential for promoting the growth of some crops. The purposes of this study were to analyze the colonization ability of strain NCD-2 in different crops and reveal the plant growth promotion mechanism of strain NCD-2 by rhizosphere microbiome analysis. qRT-PCR was used to determine the populations of strain NCD-2, and microbial communities’ structures were analyzed through amplicon sequencing after application of strain NCD-2. Results demonstrated that strain NCD-2 had a good growth promotion effect on tomato, eggplant and pepper, and it was the most abundant in eggplant rhizosphere soil. There were significantly differences in the types of beneficial microorganisms recruited for different crops after application of strain NCD-2. PICRUSt analysis showed that the relative abundances of functional genes for amino acid transport and metabolism, coenzyme transport and metabolism, lipid transport and metabolism, inorganic ion transport and metabolism, and defense mechanisms were enriched in the rhizospheres of pepper and eggplant more than in the rhizospheres of cotton, tomato and maize after application of strain NCD-2. In summary, the colonization ability of strain NCD-2 for five plants was different. There were differences in microbial communities’ structure in rhizosphere of different plants after application of strain NCD-2. Based on the results obtained in this study, it was concluded that the growth promoting ability of strain NCD-2 were correlated with its colonization quantity and the microbial species it recruited.

Seasonal variation characteristics of inhalable bacteria in bioaerosols and antibiotic resistance genes in Harbin

Bioaerosols have received extensive attention due to their impact on climate, ecological environment, and human health. This study aimed to reveal the driving factors that structure bacterial community composition and the transmission route of antibiotic resistance genes (ARGs) in PM_2.5. The results showed that the bacterial concentration in spring (8.76 × 10⁵ copies/m³) was significantly higher than that in summer (1.03 × 10⁵ copies/m³) and winter (4.74 × 10⁴ copies/m³). Low temperatures and air pollution in winter negatively affected bacterial concentrations. Keystone taxa were identified by network analysis. Although about 50 % of the keystone taxa had low relative abundances, the strong impact of complex interactions between keystone taxa and other taxa on bacterial community structure deserved attention. The bacterial community assembly was dominated by stochastic processes (79.3 %). Interactions between bacteria and environmental filtering together affected bacterial community composition. Vertical gene transfer played an important role in the transmission of airborne ARGs. Given the potential integration and expression of ARGs in recipients, the human exposure risk due to high concentrations of ARGs and mobile genetic elements cannot be ignored. This study highlights human exposure to inhalable bacterial pathogens and ARGs in urban areas.

Bioaerosols in an industrial park and the adjacent houses: Dispersal between indoor/outdoor, the impact of air purifier, and health risk reduction

Inhaling airborne pathogens may cause severe epidemics showing huge threats to indoor dwellings residents. The ventilation, environmental parameters, and human activities would affect the abundance and pathogenicity of bioaerosols in indoor. However, people know little about the indoor airborne microbes especially pathogens near the industrial park polluted with organics and heavy metals. Herein, the indoor bioaerosols' community composition, source and influencing factors near an electronic waste (e-waste) industrial park were investigated. Results showed that the average bioaerosol level in the morning was lower than evening. Bioaerosol concentration and activity in indoor (1936 CFU/m³ and 7.62 × 10⁵ ng/m³ sodium fluorescein in average) were lower than the industrial park (4043 CFU/m³ and 7.77 × 10⁵ ng/m³ sodium fluorescein), and higher microbial viability may be caused by other pollutants generated during e-waste dismantling process. Fluorescent biological aerosol particles occupied 17.6%-23.7% of total particles, indicating that most particles were non-biological. Bacterial communities were richer and more diverse than fungi. Furthermore, Bacillus and Cladosporium were the dominant indoor pathogens, and pathogenic fungi were more influenced by environmental factors than bacteria. SourceTracker analysis indicates that outdoor was the main source of indoor bioaerosols. The hazard quotient (<1) of airborne microbes through inhalation was negligible, but long-term exposure to pathogens could be harmful. Air purifiers could effectively remove the airborne fungi and spheroid bacteria than cylindrical bacteria, but open doors and windows would reduce the purification efficiency. This study is great important for risk assessments and control of indoor bioaerosols near industrial park.

Effect of incorporation of broccoli residues into soil on occurrence of verticillium wilt of spring-sowing-cotton and on rhizosphere microbial communities structure and function

Cotton verticillium wilt (CVW) represented a typical plant soil-borne disease and resulted in widespread economic losses in cotton production. However, the effect of broccoli residues (BR) on verticillium wilt of spring-sowing-cotton was not clear. We investigated the effects of BR on CVW, microbial communities structure and function in rhizosphere of two cotton cultivars with different CVW resistance using amplicon sequencing methods. Results showed that control effects of BR on CVW of susceptible cultivar (cv. EJ-1) and resistant cultivar (cv. J863) were 58.49% and 85.96%, and the populations of V. dahliae decreased by 14.31% and 34.19%, respectively. The bacterial diversity indices significantly increased in BR treatment, while fungal diversity indices significantly decreased. In terms of microbial community composition, the abilities to recruit bacteria and fungi were enhanced in BR treatment, including RB41, Gemmatimonas, Pontibacter, Streptomyces, Blastococcus, Massilia, Bacillus, and Gibberella, Plectosphaerella, Neocosmospora, Aspergillus and Preussia. However, the relative abundances of Sphingomonas, Nocardioides, Haliangium, Lysobacter, Penicillium, Mortierella and Chaetomidium were opposite tendency between cultivars in BR treatment. According to PICRUSt analysis, functional profiles prediction showed that significant shifts in metabolic functions impacting KEGG pathways of BR treatment were related to metabolism and biosynthesis. FUNGuild analysis indicated that BR treatment altered the relative abundances of fungal trophic modes. The results of this study demonstrated that BR treatment decreased the populations of V. dahliae in soil, increased bacterial diversity, decreased fungal diversity, changed the microbial community structure and function, and increased the abundances of beneficial microorganisms.

Review on recent progress in on-line monitoring technology for atmospheric pollution source emissions in China

Emissions from mobile sources and stationary sources contribute to atmospheric pollution in China, and its components, which include ultrafine particles (UFPs), volatile organic compounds (VOCs), and other reactive gases, such as NH₃ and NO_x, are the most harmful to human health. China has released various regulations and standards to address pollution from mobile and stationary sources. Thus, it is urgent to develop online monitoring technology for atmospheric pollution source emissions. This study provides an overview of the main progress in mobile and stationary source monitoring technology in China and describes the comprehensive application of some typical instruments in vital areas in recent years. These instruments have been applied to monitor emissions from motor vehicles, ships, airports, the chemical industry, and electric power generation. Not only has the level of atmospheric environment monitoring technology and equipment been improving, but relevant regulations and standards have also been constantly updated. Meanwhile, the developed instruments can provide scientific assistance for the successful implementation of regulations. According to the potential problem areas in atmospheric pollution in China, some research hotspots and future trends of atmospheric online monitoring technology are summarized. Furthermore, more advanced atmospheric online monitoring technology will contribute to a comprehensive understanding of atmospheric pollution and improve environmental monitoring capacity.

Comparison of bacterial community structure in PM2.5 during hazy and non-hazy periods in Guilin, South China

In recent years, significant efforts have been made to study changes in the levels of air pollutants at regional and urban scales, and changes in bioaerosols during air pollution events have attracted increasing attention. In this study, the bacterial structure of PM_2.5 was analysed under different environmental conditions during hazy and non-hazy periods in Guilin. A total of 32 PM_2.5 samples were collected in December 2020 and July 2021, and the microbial community structures were analysed using high-throughput sequencing methods. The results show that air pollution and climate change alter the species distribution and community diversity of bacteria in PM_2.5, particularly Sphingomonas and Pseudomonas. The structure of the bacterial community composition is related to diurnal variation, vertical height, and urban area and their interactions with various environmental factors. This is a comprehensive study that characterises the variability of bacteria associated with PM_2.5 in a variety of environments, highlighting the impacts of environmental effects on the atmospheric microbial community. The results will contribute to our understanding of haze trends in China, particularly the relationship between bioaerosol communities and the urban environment.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10453-022-09777-0.

Co-Exposure of Ambient Particulate Matter and Airborne Transmission Pathogens: The Impairment of the Upper Respiratory Systems

Recent evidence has pinpointed the positive relevance between air particulate matter (PM) pollution and epidemic spread. However, there are still significant knowledge gaps in understanding the transmission and infection of pathogens loaded on PMs, for example, the interactions between pathogens and pre-existing atmospheric PM and the health effects of co-exposure on the inhalation systems. Here, we unraveled the interactions between fine particulate matter (FPM) and Pseudomonas aeruginosa (P. aeruginosa) and evaluated the infection and detrimental effects of co-exposure on the upper respiratory systems in both in vitro and in vivo models. We uncovered the higher accessibility and invasive ability of pathogens to epithelial cells after loading on FPMs, compared with the single exposure. Furthermore, we designed a novel laboratory exposure model to simulate a real co-exposure scenario. Intriguingly, the co-exposure induced more serious functional damage and longer inflammatory reactions to the upper respiratory tract, including the nasal cavity and trachea. Collectively, our results provide a new point of view on the transmission and infection of pathogens loaded on FPMs and uncover the in vivo systematic impairments of the inhalation tract under co-exposure through a novel laboratory exposure model. Hence, this study sheds light on further investigations of the detrimental effects of air pollution and epidemic spread.

Regionalization and Shaping Factors for Microbiomes and Core Resistomes in Atmospheric Particulate Matters

Antimicrobial resistance (AMR) seriously threatens public health by reducing antibiotic effectiveness in curing bacterial infections. Atmospheric particulate matter (APM) is a common environmental hazard that affects human health by causing various diseases and disseminating bacterial pathogenesis, of which pathogenic bacteria and AMR are essential parts. The properties of APM microbiomes and resistomes, along with their shaping factors and mutual relationships, need further examination. To address this, we analyzed APMs collected from 13 cities within four clusters (North and South China, Inner Mongolia, and Tibet). Significant regionalization was found for both the microbiomes (P < 0.001) and core resistomes (P < 0.001) for APMs, with statistical analyses showing significant differences in different regions. Principal coordinate analysis (PCoA) and accompanying ANOSIM analyses showed that microbiomes and core resistomes followed the same regional subclustering hierarchy patterns. This finding, together with response analysis of APM microbiomes and core resistomes to environmental parameters that showed similar response patterns, as well as Procrustes analysis (M² = 0.963, P < 0.05) between APM microbiomes and core resistomes, strongly suggested that APM microbiomes and core resistomes are correlated. Co-occurrence network analysis further revealed key taxa and antimicrobial resistance determinants in the interactions between APM microbiomes and core resistomes. Thus, it was concluded that APM microbiome and resistome compositions were highly regional, that environmental pollutants and APM levels impacted APM microbiomes and resistomes, and that microbiomes and resistomes in APMs are significantly correlated (P < 0.05). IMPORTANCE Bacteria associated with atmospheric particulate matter (APMs) can transmit over long distances. A large portion of these bacteria can potentially threaten human health. The antimicrobial resistance (AMR) of pathogenic bacteria carried by APMs prevents curing from infections. Therefore, both the pathogenic bacteria in APMs and their AMR are receiving more attention. The literature suggests a knowledge gap that exists for bacterial AMR and bacterial pathogenesis in APMs, including their distribution patterns, mutual relationships, and factors influencing their compositions. This work aimed to bridge this knowledge gap by studying APM samples collected from 13 cities. The results demonstrated that both bacteria and antibiotic resistance determinants were highly regional and that their composition patterns were significantly correlated, and influenced by the same group of environmental factors. This study thus determined the relationship between the two important aspects of bacterial pathogenesis in APMs and represents significant progress in understanding bacterial pathogenesis in APMs.

Size distribution, community composition, and influencing factors of bioaerosols on haze and non-haze days in a megacity in Northwest China

Bioaerosols have become a major environmental concern in recent years. In this study, the diurnal variations and size distributions of bioaerosols, as well as airborne bacterial community compositions and their influencing factors on haze and non-haze days in Xi'an, China, were compared. The results indicated that the mean bacteria and fungi concentrations on non-haze days were 1.7 and 1.4 times of those on haze days, respectively, whereas the mean total airborne microbe (TAM) concentration was higher on haze days. Bacteria concentrations were the lowest in the afternoon, and the TAM concentration exhibited a bimodal distribution with two peaks coinciding with traffic rush hours. On haze days airborne fungi was mainly attached to PM_2.5, whereas bacteria and TAM were mainly distributed in coarse PM. The relative abundance of Chao1, Shannon and Simpson indices of bacterial communities were higher in the non-haze day samples, for the reason that high PM_2.5 levels with a large specific surface area may absorb more toxic and harmful substances on haze days, which should affect microbial growth. At the generic level, the relative abundance of Rhodococcus, Paracoccus, Acinetobacter, and Kocuria on haze days was higher than that on non-haze days, indicating a higher risk of contracting pathogenic pneumonia. The results of the redundancy analysis revealed that PM_2.5 and water-soluble inorganic ions (WSIIs, NO₃^-, SO₄²⁺, and NH₄⁺) strongly affected the bacterial communities on non-haze days, especially Acinetobacter. The atmospheric oxidation capacity (O_x) had a significant effect on bacterial communities during haze episodes, which were positively correlated with Paracoccus, Deinococcus, Sphingomonas, and Rubellimicrobium and were negatively correlated with Rhodococcus. These results provide valuable data to elucidate the formation and evolution of bioaerosol between haze and non-haze events and its potential threats to human health.

Effects of antibiotics consumption on the behavior of airborne antibiotic resistance genes in chicken farms

The antibiotics and antibiotic resistance genes (ARGs) have caused pollution of livestock farm environments. There are limited investigations about airborne ARGs and what role the antibiotics play remains largely unclear. The dynamics of various antibiotics were compared between feces samples from chicken fed a diet with and without antibiotics. In contrast to the farm with no antibiotics drugs, the hazard quotients (HQs) of OTC (24.8-205.4) and CTC (18.0-317.0) are particularly high in the farm with in-feed antibiotics drugs. The high ecological risks of antibiotics in chicken feces with in-feed antibiotic drugs were 100 % as determined. We quantified mobile genetic elements (MGEs) and ARGs and investigated bacterial communities in feces and air samples. The concentration of airborne ARG/MGE subtypes with in-feed antibiotic drugs is about two orders of magnitude higher than those without drugs. This study reveals that the indoor air of chicken farms is a reservoir of ARGs in the environment. Continuous feeding of antibiotics can change the intestinal microbial community structure of the chicken. The possibility of horizontal gene transfer of ARGs in air and feces samples might be increased by in-feed antibiotic drugs. The enrichment of ARGs in the chicken farm can be reduced by minimizing antibiotic use.

Airborne microbial community structure and potential pathogen identification across the PM size fractions and seasons in the urban atmosphere

As a vital component of airborne bioaerosols, bacteria and fungi seriously endanger human health as pathogens and allergens. However, comprehensive effects of environmental variables on airborne microbial community structures remain poorly understood across the PM sizes and seasons. We collected atmospheric PM_1.0, PM_2.5, and PM₁₀ samples in Hefei, a typical rapidly-developing city in East China, across three seasons, and performed a comprehensive analysis of airborne microbial community structures using qPCR and high-throughput sequencing. Overall the bacterial and fungal abundances in PM_1.0 were one to two orders of magnitude higher than those in PM_2.5 and PM₁₀ across seasons, but their α-diversity tended to increase from PM_1.0 to PM₁₀. The bacterial gene abundances showed a strong positive correlation (P < 0.05) with atmospheric SO₂ and NO₂ concentrations and air quality index. The bacterial gene abundances were significantly higher (P = 0.001) than fungi, and the bacterial diversity showed stronger seasonality. The PM sizes influenced distribution patterns for airborne microbial communities within the same season. Source-tracking analysis indicated that soils, plants, human and animal feces represented important sources of airborne bacteria with a total relative abundance of more than 60% in summer, but total abundance from the unidentified sources surpassed in fall and winter. Total 10 potential bacterial and 12 potential fungal pathogens were identified at the species level with the highest relative abundances in summer, and their abundances increased with the PM sizes. Together, our results indicated that a complex set of environmental factors, including water-soluble ions in PM, changes in air pollutant levels and meteorological conditions, and shifts in the relative importance of available microbial sources, acted to control the seasonal compositions of microbial communities in the urban atmosphere.

Global Meta-analysis of Airborne Bacterial Communities and Associations with Anthropogenic Activities

Airborne microbiome alterations, an emerging global health concern, have been linked to anthropogenic activities in numerous studies. However, these studies have not reached a consensus. To reveal general trends, we conducted a meta-analysis using 3226 air samples from 42 studies, including 29 samples of our own. We found that samples in anthropogenic activity-related categories showed increased microbial diversity, increased relative abundance of pathogens, increased co-occurrence network complexity, and decreased positive edge proportions in the network compared with the natural environment category. Most of the above conclusions were confirmed using the samples we collected in a particular period with restricted anthropogenic activities. Additionally, unlike most previous studies, we used 15 human-production process factors to quantitatively describe anthropogenic activities. We found that microbial richness was positively correlated with fine particulate matter concentration, NH₃ emissions, and agricultural land proportion and negatively correlated with the gross domestic product per capita. Airborne pathogens showed preferences for different factors, indicating potential health implications. SourceTracker analysis showed that the human body surface was a more likely source of airborne pathogens than other environments. Our results advance the understanding of relationships between anthropogenic activities and airborne bacteria and highlight the role of airborne pathogens in public health.

Air pollution: A culprit of lung cancer

Air pollution is a global health problem, especially in the context of rapid economic development and the expansion of urbanization. Herein, we discuss the harmful effects of outdoor and indoor pollution on the lungs. Ambient particulate matters (PMs) from industrial and vehicle exhausts is associated with lung cancer. Workers exposed to asbestos, polycyclic aromatic hydrocarbons (PAHs), and toxic metals are also likely to develop lung cancer. Indoors, cooking fumes, second-hand smoke, and radioactive products from house decoration materials play roles in the development of lung cancer. Bacteria and viruses can also be detrimental to health and are important risk factors in lung inflammation and cancer. Specific effects of lung cancer caused by air pollution are discussed in detail, including inflammation, DNA damage, and epigenetic regulation. In addition, advanced materials for personal protection, as well as the current government policies to prevent air pollution, are summarized. This review provides a basis for future research on the relationship between lung cancer and air pollution.

Characteristics of airborne bacterial communities and antibiotic resistance genes under different air quality levels

Pathogenic bacteria and antibiotic resistance genes (ARGs) in bioaerosols are major threats to human health. In this study, the microbial community structure and ARG distribution characteristics of airborne bacteria in total suspended particulates (TSP) and PM_2.5 were investigated under different air quality levels in Xinxiang, Central China. The results revealed that with the deterioration of air quality, the concentrations of airborne bacteria in both TSP and PM_2.5 decreased; however, the relative amounts of pathogenic bacteria increased. The predominant genera in pathogenic bacteria of Bacillus, Sphingomonas, Corynebacterium, Rhodococcus, and Staphylococcus were identified in both TSP and PM_2.5. Although the airborne bacteria concentrations and absolute abundances of ARGs in TSP were higher than those in PM_2.5 under identical air quality conditions, the bacterial community structure and relative amounts of pathogenic bacteria were similar. In addition, the relationship between environmental factors of ions, metal elements, and meteorological parameters and the community structures of airborne bacteria and pathogenic bacteria were also analyzed. The effects of soluble ions and metal elements on several dominant genera of total bacteria and pathogenic bacteria differed, probably due to the strong tolerance of pathogenic bacteria to harsh atmospheric environments Different subtypes of ARGs showed various distribution characteristics with variations in air quality. The deterioration of air quality can inhibit the dissemination of ARGs, as the minimum values of all ARGs and class 1 integrase intI1 were observed under Severely Polluted conditions. This study provides a comprehensive understanding of the effect of air pollution levels on the airborne bacteria community composition and ARG distribution.

Assessing the relationship between airborne fungi and potential dust sources using a combined approach

Dust events impose negative socio-economic, health, and environmental impacts on vulnerable areas and reflect their sources' physiochemical and biological characteristics. This study aimed to assess the impact of two dust sources on the concentration and diversity of airborne fungi in one of the dustiest areas in the world. This study is the first attempt to investigate the relationship between dust sources fungal community and those in airborne dust. Also, the contribution of dust sources to airborne fungi was estimated. Air masses arriving at the study area were assessed using local wind rose and the HYSPLIT model. Sampling was carried out from airborne dust at the Arvand Free Zone as target areas and soil in the dried parts of the Hor al-Azim and Shadegan wetlands as source areas to explore the relationship between fungi in the dust sources and the downwind area. The samples were analyzed in the lab to extract DNA. The internal transcribed spacer (ITS) regions of the rDNA gene were amplified using the primers ITS1F and ITS4, and then PCR products were sent to the lab for sequencing. The raw DNA data were processed using the QIIME virtual box to pick operational taxonomic units and taxonomy assignments. The most common fungi at the genus level were in the order of Penicillium > Aspergillus > Alternaria > Fusarium > Paradendryphiella > Talaromyces. The similarity between air and soil fungal genera was investigated using richness and diversity indices, the phylogenetic tree, and principal component analysis. The results showed that the community structures of ambient fungi in the Hor al-Azim and Shadegan dust sources were more similar to those on dusty days than non-dusty days. The source tracker model was used to quantify the contributions of known dust sources to airborne fungi. The results showed that the main source of airborne fungi was Hor al-Azim on dusty and non-dusty days. This study's results can help managers identify and prioritize dust sources regarding fungal species.

PM2.5 drives bacterial functions for carbon, nitrogen, and sulfur cycles in the atmosphere

Airborne bacteria may absorb the substance from the atmospheric particles and play a role in biogeochemical cycling. However, these studies focused on a few culturable bacteria and the samples were usually collected from one site. The metabolic potential of a majority of airborne bacteria on a regional scale and their driving factors remain unknown. In this study, we collected particulates with aerodynamic diameter ≤2.5 μm (PM_2.5) from 8 cities that represent different regions across China and analyzed the samples via high-throughput sequencing of 16S rRNA genes, quantitative polymerase chain reaction (qPCR) analysis, and functional database prediction. Based on the FAPROTAX database, 326 (80.69%), 191 (47.28%) and 45 (11.14%) bacterial genera are possible to conduct the pathways of carbon, nitrogen, and sulfur cycles, respectively. The pathway analysis indicated that airborne bacteria may lead to the decrease in organic carbon while the increase in ammonium and sulfate in PM_2.5 samples, all of which are the important components of PM_2.5. Among the 19 environmental factors studied including air pollutants, meteorological factors, and geographical conditions, PM_2.5 concentration manifested the strongest correlations with the functional genes for the transformation of ammonium and sulfate. Moreover, the PM_2.5 concentration rather than the sampling site will drive the distribution of functional genera. Thus, a bi-directional relationship between PM_2.5 and bacterial metabolism is suggested. Our findings shed light on the potential bacterial pathway for the biogeochemical cycling in the atmosphere and the important role of PM_2.5, offering a new perspective for atmospheric ecology and pollution control.

Evolution of PM2.5 bacterial community structure in Beijing's suburban atmosphere

Biosafety has become one of the greatest challenges facing humanity. Outbreaks of infectious diseases caused by bacteria and viruses have had a huge impact on public health. In addition, non-severe polluted air quality has gradually become the norm; however, literature on the impacts of bioaerosols under long-term exposure to low concentrations of PM_2.5 in China is limited. This study analyzed the evolution of the PM_2.5 bacterial community in the Huairou district of Beijing under different pollution conditions. We used high-throughput sequencing to seasonally analyze samples over a year (from July 2018 to May 2019) and winter samples from different years (2015, 2016, 2018, and 2019). The results showed that the bacterial diversity and community composition of PM_2.5 were significantly different in different seasons, whereas under different pollution levels, there were no significant differences. During the observation period, the number of bacterial species decreased with the increase in pollution; however, a high proportion of bacteria can exist as core species under different pollution levels for a long time. Furthermore, bacteria can be relatively stable in the local environment during the same season but in different years. Although the relative abundances of different bacteria change differently with the variation in pollution level, there is no statistical difference. Importantly, there was a higher abundance of opportunistic pathogenic bacteria when the air quality index was 0-100 in winter. This study comprehensively revealed the characteristics of the evolution of bacterial communities under different pollution levels and in different years and emphasized the health effects of non-pollution air quality. This study can provide a theoretical basis for establishing a sound environmental microbial monitoring and defense system.

The decay of airborne bacteria and fungi in a constant temperature and humidity test chamber

Despite substantial research to profile the microbial characteristics in the atmosphere, the changing metabolism underpinning microbial successional dynamics remains ambiguous. Herein, we applied qPCR, high-throughput sequencing of the genes encoding 16S and ITS rRNA to render the bacterial/fungal dynamics of ambient PM_2.5 filters maintained at constant conditions of temperature (20 ± 2 °C) and humidity (50 ± 5%). The incubation experiments which lasted for 50 days aim to simulate a metabolic process of microbe in two types PM_2.5 (polluted and non-polluted). The results show that microbial community species in polluted PM_2.5 had faster decay rates, more bacterial diversity and less fungal community compared to the non-polluted ones. For bacteria, the proportion of anaerobic species is higher than aerobic ones, and their performance of contain mobile elements, form-biofilms, and pathogenic risks declined rapidly as times went by. Whereas for fungi, saprotroph species occupied about 70% of the population, resulting in a specified peak of abundance due to the adequacy nutrients supplied by the apoptosis cells. Combining the classified microbial species, we found stable community structure and the volatile ones related to the various metabolic survival strategies during different time. Without the input of peripheral environment, the health risks of airborne microbe descend to a healthy level after 20 days, implying their biologic effectiveness was about 20 days no matter the air is polluted or not. This study provided new insights into the different metabolic survival of airborne microorganisms in ideal and stable conditions.

Bioaerosol is an important transmission route of antibiotic resistance genes in pig farms

Although pig farms are hotspots of antibiotic resistance due to intensive use of antibiotics, little is known about the abundance, diversity and transmission of airborne antibiotic resistance genes (ARGs). This study reports that bioaerosol is an important spread route of ARGs in pig farms. ARGs, mobile genetic elements (MGEs), and bacterial communities were investigated in both air and feces samples during winter and summer. The average concentration of airborne ARGs and MGEs during winter is higher than that during summer when using the ventilation system. The tetM is identified as the predominant airborne ARG with abundance of 6.3 ± 1.2 log copies/m³. Clostridium and Streptococcus are two dominant bacteria and several opportunistic pathogens are detected in air samples. High temperature is favorable for more diverse bacterial communities, but relative humidity has negative effects. The wind speed promotes the spread of airborne ARGs. The network analysis results show the average fecal contribution to airborne bacteria is 19.9% and 59.4% during summer and winter, respectively. Horizontal gene transfer plays an important role in the dissemination of airborne ARGs during winter (77.8% possibility), while a lower possibility of 12.0% in summer.

Concentrations, Size Distribution, and Community Structure Characteristics of Culturable Airborne Antibiotic-Resistant Bacteria in Xinxiang, Central China

Antimicrobial resistance is considered an important threat to global health and has recently attracted significant attention from the public. In this study, the concentrations and size distribution characteristics of culturable airborne total bacteria (TB) and four antibiotic-resistant bacteria (tetracycline-resistant bacteria (TRB), ciprofloxacin-resistant bacteria (CRB), erythromycin-resistant bacteria (ERB), and ampicillin-resistant bacteria (ARB)) were investigated for approximately one year to explore their variations under different seasons, diurnal periods, and air quality levels. The concentrations of TB and four antibiotic-resistant bacteria in winter and night were higher than during other seasons and diurnal periods. Their maximum concentrations were detected from air under moderate pollution or heavy pollution. PM2.5, PM10, SO2, and NO2 were positively related to TB and four antibiotic-resistant bacteria (p < 0.01), whereas O3 and wind speed were negatively related to them (p < 0.05). The particle size of TB and four antibiotic-resistant bacteria were mainly distributed in stage V (1.1–2.2 µm). Bacillus was the dominant genus of ARB (75.97%) and CRB (25.67%). Staphylococcus and Macrococcus were the dominant genera of TRB (46.05%) and ERB (47.67%), respectively. The opportunistic pathogens of Micrococcus, Sphingomonas, Enterococcus, Rhodococcus, and Stenotrophomonas were also identified. This study provides important references for understanding the threat of bioaerosols to human health.

Optimization of microcystin biodegradation by bacterial community YFMCD4 using response surface method

The increasing production of microcystin-LR (MC-LR) causing animal and human health issues is found in eutrophic water bodies, marine habitats and desert environments. The health threat posed by MC-LR has led to the establishment of World Health Organization's water guideline value of 1 μg/mL. Combating this has increased the search for cost-effective approach to degrade MC-LR. The study aimed to optimize the MC-degrading environmental factors of bacterial community YFMCD4. Response surface methodology (RSM) was employed to evaluate the influence of varying temperatures, pH and initial MC-LR concentration on the biodegradation efficiency of MC-LR by bacterial community YFMCD4. The optimal MC-LR biodegradation environmental factors were found to be 30 °C, pH 7 and 2 μg/mL initial MC-LR. The biodegradation rate reached 100% after 10 h. YFMCD4 mainly consisted of genera Alacligenes, Sphingobacterium and Pseudomonas using High-throughput pyrosequencing technology. The mlrA gene encoding MlrA enzyme considered most important for MC-LR biodegradation was obtained from YFMCD4. Data demonstrated that the bacterial structure and biodegradation efficiency of YFMCD4 varied with the change of environmental factors including temperature, pH and MC-LR concentrations. RSM is considered a good method to examine the optimal biodegradation environmental conditions for MC-LR. To date, RSM and High-throughput pyrosequencing technology are employed to optimize the biodegradation conditions (30 °C, pH 7 and 2 μg/mL initial MC-LR) and analyze the structure of bacterial community for the first time.

Seasonal Variation Characteristics of Bacteria and Fungi in PM2.5 in Typical Basin Cities of Xi’an and Linfen, China

Microorganisms existing in airborne fine particulate matter (PM2.5) have key implications in biogeochemical cycling and human health. In this study, PM2.5 samples, collected in the typical basin cities of Xi’an and Linfen, China, were analyzed through high-throughput sequencing to understand microbial seasonal variation characteristics and ecological functions. For bacteria, the highest richness and diversity were identified in autumn. The bacterial phyla were dominated by Proteobacteria, Actinobacteria, Firmicutes, and Bacteroidetes. Metabolism was the most abundant pathway, with the highest relative abundance found in autumn. Pathogenic bacteria (Pseudomonas, Acinetobacter, Serratia, and Delftia) were positively correlated with most disease-related pathways. Besides, C cycling dominated in spring and summer, while N cycling dominated in autumn and winter. The relative abundance of S cycling was highest during winter in Linfen. For fungi, the highest richness was found in summer. Basidiomycota and Ascomycota mainly constituted the fungal phyla. Moreover, temperature (T) and sulfur dioxide (SO2) in Xi’an, and T, SO2, and nitrogen dioxide (NO2) in Linfen were the key factors affecting microbial community structures, which were associated with different pollution characteristics in Xi’an and Linfen. Overall, these results provide an important reference for the research into airborne microbial seasonal variations, along with their ecological functions and health impacts.

Diurnal Variations of Size-Resolved Bioaerosols During Autumn and Winter Over a Semi-Arid Megacity in Northwest China

Bioaerosols have a major negative effect on air quality and on public health by causing the spread of diseases. This study evaluated the bioaerosol composition and variation in a semi-arid megacity of northwest China from October 2019 to January 2020 using an Andersen six-stage impactor sampler. The size distribution, diurnal variations of the concentrations of airborne bacteria, airborne fungi, and total airborne microbes (TAM) were investigated in autumn and winter. The mean concentrations of airborne bacteria, fungi, and TAM were 523.5 ± 301.1 colony-forming units (CFU)/m3, 1318.9 ± 447.8 CFU/m3, and (7.25 ± 1.90) × 106 cells/m3, respectively, in autumn and 581 ± 305.4 CFU/m3, 1234.4 ± 519.9 CFU/m3, and (5.96 ± 1.65) × 106 cells/m3, respectively, in winter. The mean bioaerosol concentrations were slightly higher on nonhaze days than on haze days, but the difference was not statistically significant. Higher ambient particulate matter levels and atmospheric oxidation capacity inhibited bacteria survival. The diurnal maximum bioaerosol concentration was observed in the morning in autumn, whereas in winter, bioaerosols did not exhibit such a distribution, the impact of human activities on bioaerosols was still uncertain. The size of airborne bacteria exhibited a bimodal distribution, whereas a unimodal pattern was observed for fungi and TAM. Most bacteria, fungi, and TAM were distributed in the respirable ranges from trachea and primary bronchi to alveoli, indicating that bioaerosols have a high risk of being inhaled and causing respiratory diseases in Xi'an.

Vertical variations in the concentration and community structure of airborne microbes in PM2.5

With the recent rapid development of urbanization, severe air pollution events frequently occur in China. Subsequently, variations of bioaerosols during air pollution events have attracted increasing attention in recent years. However, most published studies on bioaerosols mainly focus on the characteristics of airborne bacteria and fungi at a certain height near the ground surface. The vertical variations in microbial aerosols at different heights are not well understood. In this study, PM_2.5 samples at three heights (1.5 m, 100 m and 229.5 m) were collected from September 2019 to January 2020 in Xi'an, China. The samples were then analyzed by a fluorescence staining and high-throughput sequencing to explore the vertical variations in the concentration and community structure of the airborne bacteria. The results show that the microbial concentration in PM_2.5 decreased with increasing height on polluted days, while there was no significant difference at different heights on non-polluted days (p > 0.05). The bacterial community structures were similar at different heights on polluted days; however, on non-polluted days, the bacterial community structure at 229.5 m was significantly different from that at the other heights. Importantly, meteorological factors had more significant effects on the bacterial community at 229.5 m than at 1.5 m and 100 m. The present results can improve the understanding of vertical distribution of bioaerosols and their diffusion process.

Three-wavelength optical sensor for measuring distributed mass concentrations of aerosols from stationary sources

Stationary source emissions of key industries, such as thermal power plants, have become the central consideration in environmental protection programs. Existing photoelectric sensors at stationary sources usually use a single wavelength laser to measure the total mass concentration of the particulate matter, bearing inherent errors due to the changing particle size distribution (PSD). However, the total mass concentration cannot comprehensively estimate the air pollution caused by the stationary sources. Therefore, it is required to measure both the mass concentration and PSD of the aerosols emitted by the stationary sources, based on which we can get a distributed mass concentration. To implement this, in this study, we designed a novel three-wavelength photoelectric sensor and tested its performance. Results showed that the prototype correctly determines the mean particle size and standard deviation of the PSDs and consequently adjusts the coefficient for measuring the mass concentration from light intensity, providing a comprehensive assessment of the pollutants.

The Microbiome of Size-Fractionated Airborne Particles from the Sahara Region

Diverse airborne microbes affect human health and biodiversity, and the Sahara region of West Africa is a globally important source region for atmospheric dust. We collected size-fractionated (>10, 10-2.5, 2.5-1.0, 1.0-0.5, and <0.5 μm) atmospheric particles in Mali, West Africa and conducted the first cultivation-independent study of airborne microbes in this region using 16S rRNA gene sequencing. Abundant and diverse microbes were detected in all particle size fractions at levels higher than those previously hypothesized for desert regions. Average daily abundance was 1.94 × 10⁵ 16S rRNA copies/m³. Daily patterns in abundance for particles <0.5 μm differed significantly from other size fractions likely because they form mainly in the atmosphere and have limited surface resuspension. Particles >10 μm contained the greatest fraction of daily abundance (51-62%) and had significantly greater diversity than smaller particles. Greater bacterial abundance of particles >2.5 μm that are bigger than the average bacterium suggests that most airborne bacteria are present as aggregates or attached to particles rather than as free-floating cells. Particles >10 μm have very short atmospheric lifetimes and thus tend to have more localized origins. We confirmed the presence of several potential pathogens using polymerase chain reaction that are candidates for viability and strain testing in future studies. These species were detected on all particle sizes tested, including particles <2.5 μm that are expected to undergo long-range transport. Overall, our results suggest that the composition and sources of airborne microbes can be better discriminated by collecting size-fractionated samples.

Assessment and statistical modelling of airborne microorganisms in Madrid

The limited evidence available suggests that the interaction between chemical pollutants and biological particles may intensify respiratory diseases caused by air pollution in urban areas. Unlike air pollutants, which are routinely measured, records of biotic component are scarce. While pollen concentrations are daily surveyed in most cities, data related to airborne bacteria or fungi are not usually available. This work presents the first effort to understand atmospheric pollution integrating both biotic and abiotic agents, trying to identify relationships among the Proteobacteria, Actinobacteria and Ascomycota phyla with palynological, meteorological and air quality variables using all biological historical records available in the Madrid Greater Region. The tools employed involve statistical hypothesis contrast tests such as Kruskal-Wallis and machine learning algorithms. A cluster analysis was performed to analyse which abiotic variables were able to separate the biotic variables into groups. Significant relationships were found for temperature and relative humidity. In addition, the relative abundance of the biological phyla studied was affected by PM₁₀ and O₃ ambient concentration. Preliminary Generalized Additive Models (GAMs) to predict the biotic relative abundances based on these atmospheric variables were developed. The results (r = 0.70) were acceptable taking into account the scarcity of the available data. These models can be used as an indication of the biotic composition when no measurements are available. They are also a good starting point to continue working in the development of more accurate models and to investigate causal relationships.

The source and transport of bioaerosols in the air: A review

Recent pandemic outbreak of the corona-virus disease 2019 (COVID-19) has raised widespread concerns about the importance of the bioaerosols. They are atmospheric aerosol particles of biological origins, mainly including bacteria, fungi, viruses, pollen, and cell debris. Bioaerosols can exert a substantial impact on ecosystems, climate change, air quality, and public health. Here, we review several relevant topics on bioaerosols, including sampling and detection techniques, characterization, effects on health and air quality, and control methods. However, very few studies have focused on the source apportionment and transport of bioaerosols. The knowledge of the sources and transport pathways of bioaerosols is essential for a comprehensive understanding of the role microorganisms play in the atmosphere and control the spread of epidemic diseases associated with them. Therefore, this review comprehensively summarizes the up to date progress on the source characteristics, source identification, and diffusion and transport process of bioaerosols. We intercompare three types of diffusion and transport models, with a special emphasis on a widely used mathematical model. This review also highlights the main factors affecting the source emission and transport process, such as biogeographic regions, land-use types, and environmental factors. Finally, this review outlines future perspectives on bioaerosols.

PM2.5-associated bacteria in ambient air: Is PM2.5 exposure associated with the acquisition of community-acquired staphylococcal infections?

Particulate matter (PM), a major component of air pollution, is an important carrier medium of various chemical and microbial compounds. Air pollution due to PM could increase the level of bacteria and associated adverse health effects. Staphylococci as important opportunistic pathogens that cause hospital- and community-acquired infections may transmit through air. This study aimed to obtain knowledge about the concentration of airborne bacteria as well as staphylococci associated with particulate matter with a diameter of less than 2.5 micrometers (PM_2.5) in ambient air. The impact of meteorological factors including ultraviolet (UV) index, wind speed, temperature, and moisture on microbial concentrations was also investigated. Quartz filters were used to collect PM_2.5 and associated bacteria in ambient air of a semiarid area. Airborne bacteria were quantified by culture method and Staphylococcus species identified by molecular methods. The mean (SD) concentration of PM_2.5 and airborne bacteria was 64.83 (24.87) µg/m³ and 38 (36) colony forming unit (CFU)/m³, respectively. The results showed no significant correlation between the levels of PM_2.5 and concentrations of bacteria (p < 0.05). Staphylococcus species were detected in 8 of 37 (22%) samples in a concentration from 3 to 213 CFU/m³. S. epidermidis was detected with the highest frequency followed by S. gallinarum and S. hominis, but S. aureus and methicillin-resistant Staphylococcus aureus (MRSA) were not detected. No significant correlation between the concentrations of bacteria with meteorological parameters was observed (p < 0.05). Our finding showed that, although the study area is sometimes subject to air pollution from PM_2.5, the concentration of PM_2.5- associated bacteria is relatively low. According to the results, PM_2.5 may not be a source of community-associated staphylococcal infections.

Exploring the disparity of inhalable bacterial communities and antibiotic resistance genes between hazy days and non-hazy days in a cold megacity in Northeast China

The physicochemical properties of inhalable particles during hazy days have been extensively studied, but their biological health threats have not been well-explored. This study aimed to explore the impacts of haze pollution on airborne bacteria and antibiotic-resistance genes (ARGs) by conducting a comparative study of the bacterial community structure and functions, pathogenic compositions, and ARGs between hazy days and non-hazy days in a cold megacity in Northeast China. The results suggested that bacterial communities were shaped by local weather and customs. In this study, cold-resistant and Chinese sauerkraut-related bacterial compositions were identified as predominant genera. In the comparative analysis, higher proportions of gram-negative bacteria and pathogens were detected on hazy days than on non-hazy days. Pollutants on hazy days provided more nutrients (sulfate, nitrate and ammonium) for bacterial metabolism but also caused more bacterial cell damage and death than on non-hazy days. This study also detected increases in the sub-types and average absolute abundance of airborne resistance genes on hazy days compared to non-hazy days. The results of this study revealed that particle pollution promotes the dissemination and exchange of pathogenic bacteria and ARGs among large urban populations, which leads to a higher potential for human inhalation exposure.

Pollution profiles of antibiotic resistance genes associated with airborne opportunistic pathogens from typical area, Pearl River Estuary and their exposure risk to human

To reveal the selective pressures of near-shore human activities on marine and continental bioaerosols, the pollution profile and potential exposure risk of airborne pathogens and antibiotic-resistance genes (ARGs) in Pearl River Estuaries (113.52 ^oE, 22.69 ^oN), a transitional zone between marine and continental environments, were fully explored. The results showed that the total bacteria among bioaerosols varied largely with average pollution levels of 1.86 × 10⁵ and 4.35 × 10⁴ cfu m^-3 in spring and summer, respectively, and were high than those of airborne fungi. The predominant aerodynamic diameters of bioaerosols were in respirable size range (<4.7 µm), and the microbes communities' diversity and abundance varied significantly. Besides, many opportunistic pathogenic bacteria (Burkholderia-Paraburkholderia, Staphylococcus and Acinetobacter) and fungi (Alternaria, Penicillium and Cladosporium) were dominant in bioaerosol samples. Of 21 ARGs subtypes detected, the tetracycline resistance gene tetA was the most abundant, followed by aminoglycoside resistance gene and mobile genetic elements. Correlation analysis revealed that the changes of pathogens community contributed significantly to the prevalence of ARGs in bioaerosol. Based on the average daily dose rates of microorganisms and human direct intake of ARGs, health risk of bioaerosols from the Pearl River Estuaries were also evaluated. In summary, the presence of opportunistic pathogens and diversity of ARGs strengthens the call to consider the bioaerosol in air quality monitoring and risk assessment in the future.

Pollution characteristics of bioaerosols in PM2.5 during the winter heating season in a coastal city of northern China

Frequent heavy air pollution occurred during the winter heating season of northern China. In this study, PM_2.5 (particles with an aerodynamic diameter less than 2.5 μm) was collected from a coastal city of China during the winter heating season from January 1 to March 31, 2018, and the soluble ions, organic carbon (OC), elemental carbon (EC), bacterial, endotoxin, and fungal concentration in PM_2.5 were analyzed. During the winter heating season, PM_2.5 and bioaerosols increased on polluted days, and the secondary inorganic ions, including NO₃^-, NH₄⁺, and SO₄^2-, increased significantly. Meteorological factors, such as wind direction and wind speed, had major impacts on the distributions of PM_2.5 and bioaerosols. Pollutant concentration was high when there was a westerly wind with the speed of 3-6 m/s from inland area. Using the air mass backward trajectories and principal component analysis, we elucidate the potential origins of bioaerosol in PM_2.5. The backward trajectory suggested that air mass for polluted samples (PM_2.5 > 75 μg/m³) commonly originated from continent (9.62%), whereas air masses for clean samples (PM_2.5 < 35 μg/m³) were mainly from marine (56.73%). The interregional transport of pollutants from continental area contributed most to PM_2.5. Principal component analysis of the water-soluble ions and bioaerosol indicated that air pollution of the coastal city was greatly affected by coal combustion, biomass burning, and regional transmission of high-intensity pollutants from continent. Among that, interregional transport, biomass burning, and dust from soil and plants were main sources of bioaerosol. Our findings provide important insights into the origins and characteristics of bioaerosol in PM_2.5 during the winter heating season of the coastal city in northern China.

Variation of near surface atmosphere microbial communities at an urban and a suburban site in Philadelphia, PA, USA

Microorganisms are abundant in the near surface atmosphere and make up a significant fraction of organic aerosols with implications on both human health and ecosystem services. Despite their importance, studies investigating biogeographical patterns of the atmospheric microbiome between urban and suburban areas are limited. Urban and suburban locations (including their microbial communities) vary considerably depending on climate, topography, industrial activities, demographics and other socio-economic factors. Hence, we need more location-specific data to make informed decision affecting air quality, human health, and the implication of a changing climate and policy decisions. The objective of this study was to describe how the atmospheric microbiome varies in composition and function between urban and suburban sites. We used high-throughput sequencing to analyze microbial communities collected at different times from PM_2.5 samples collected by active sampling method (using a pump and an impactor) and dust settling of TSP collected by passive sampling method (no pump and no impactor) from an urban and suburban site. We found diverse communities unique in composition at both sites with equivalent functional potential. Taxonomic composition varied significantly with Proteobacteria, Firmicutes, Actinobacteria, Bacteroidetes, and Other phyla in greater relative abundance at the urban site. In contrast, Cyanobacteria, Tenericutes, Fusobacteria, and Deinococcus, were enriched at the suburban site. Community diversity also demonstrated a high degree of temporal variation within site. We identified over one-third of the communities as potentially pathogenic taxa (urban: 47.52% ± 14.40%, suburban: 34.53% ± 14.60%) and determined the majority of organisms come from animal-associated host or are environmental non-specific. Potentially pathogenic taxa and source environments were similar between active- and passive- sampling method results. Our research is novel it adds to the underrepresented set of studies on atmospheric microbial structure and function across land types and is the first to compare suburban and urban atmospheric communities.

Effects of aerosol pollution on PM2.5-associated bacteria in typical inland and coastal cities of northern China during the winter heating season

Frequent heavy aerosol pollution occurs during the winter heating season in northern China. Here, we characterized the airborne bacterial community structure and concentration, during typical pollution episodes that occurred during the winter heating season of 2017-2018 in Jinan and Weihai. During this heating season, five and four heavy pollution episodes were observed in Jinan and Weihai, respectively. Compared with December and January, pollution episodes in March were significantly affected by sand dust events. Higher Bacillales were identified in the March samples from Jinan, indicating that sand dust influences bacterial communities. During similar pollution episodes, air pollution in the coastal city of Weihai was lower than the inland city of Jinan. The predominant bacteria included Staphylococcus, Cyanobacteria, Lactobacillus, Deinococcus, Enbydrobacter, Ralstonia, Bacillus, Comamonas, and Sphingomonas. These predominant bacteria are mainly from Proteobacteria, Firmicutes, Cyanobacteria, Actinobacteria, and Bacteroidetes phyla. Bacterial concentration showed significant variation with increased airborne pollutants. The highest concentration appeared during moderate pollution (up to 10⁶ cells/m³), whereas bacterial concentration decreased during heavy and severe pollution (10⁵ cells/m³), which may be related to toxic effects of high pollutant concentrations during heavy or severe pollution. Community structure variation indicated that Cyanobacterial genera were dominant in clean or slight pollution. With increased PM_2.5, Staphylococcus increased and became the most abundant bacteria in moderate pollution (up to 40%). During heavy or severe pollution, bacteria that are adaptable to harsh or extreme environments predominate, such as Deinococcus and Bacillus. In the assessment of health risks from air pollution, the bioaerosols risks must consider. Additionally, although most microbial genera are similar between the two cities, there are important differences associated with pollution level. During air pollution regulation in different regions with varied geographical and climatic conditions, bioaerosol pollution difference is an unignored factor.

Seasonal variations of microbial assemblage in fine particulate matter from a nursery pig house

The microorganisms contained in PM_2.5 from livestock houses can spread over long distances through airborne transmission. As such, the potential bacterial pathogens and fungal allergens within can pose a formidable threat to nearby residents' health and the overall environment. However, little is known about the microbial assemblage contained in PM_2.5 from pig houses. In this study, 16S and 18S rRNA gene sequencing was employed to analyze the bacterial and fungal assemblage contained in PM_2.5 from a nursery pig house across four seasons, respectively. The results showed that alpha diversity was higher in summer and autumn compared to the spring and winter. The bacterial and fungal assemblage varied according to season. At the phylum level, the dominant bacteria and fungi were Firmicutes and Basidiomycota, respectively, across the four seasons. At the genus level, a total of five potential bacterial pathogen and 20 potential fungal allergen genera were identified across the samples. The most abundant bacterial pathogen and fungal allergen genera were observed in summer and autumn, respectively, but neither had a significant correlation with PM_2.5 concentration. Moreover, microbial diversity and the relative abundance of fungal allergen genera were positively correlated with temperature and relative humidity. It can be concluded that microbial diversity and assemblage varied significantly among the seasons in a nursery pig house, and this can be useful in exploring the potential risks of PM_2.5 from pig houses across all four seasons.