Nationwide screening of surface water toxicity to algae

Combining Polar Organic Chemical Integrative Samplers (POCIS) with Toxicity Testing on Microalgae to Evaluate the Impact of Herbicide Mixtures in Surface Waters

Pesticide risk assessment within the European Union Water Framework Directive is largely deficient in the assessment of the actual exposure and chemical mixture effects. Pesticide contamination, in particular herbicidal loading, has been shown to exert pressure on surface waters. Such pollution can have direct impact on autotrophic species, as well as indirect impacts on freshwater communities through primary production degradation. The present study proposes a screening method combining polar organic chemical integrative samplers (POCIS) with mode of action-specific toxicity testing on microalgae exposed to POCIS extracts as a standard approach to effectively address the problem of herbicide mixture effects detection. This methodology has been tested using Luxembourgish rivers as a case study and has proven to be a fast and reliable information source that is complementary to chemical analysis, allowing assessment of missing target analytes. Pesticide pressure in the 24 analyzed streams was mainly exerted by flufenacet, terbuthylazine, nicosulfuron, and foramsulfuron, with occasional impacts by the nonagricultural biocide diuron. Algae tests were more sensitive to endpoints affecting photosystem II and reproduction than to growth and could be best predicted with the concentration addition model. In addition, analysis revealed that herbicide mixture toxicity is correlated with macrophyte disappearance in the field, relating mainly to emissions from maize cultures. Combining passive sampler extracts with standard toxicity tests offers promising perspectives for ecological risk assessment. The full implementation of the proposed approach, however, requires adaptation of the legislation to scientific progress. Environ Toxicol Chem 2022;41:2667-2678. © 2022 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

A sensitive electrochemical sensor for environmental toxicity monitoring based on tungsten disulfide nanosheets/hydroxylated carbon nanotubes nanocomposite

There has been growing concern about the toxic effects of pollutants in the aquatic environment. In this study, a novel cell-based electrochemical sensor was developed to detect the toxicity of contaminants in water samples. A screen-printed carbon electrode, which was low-cost, energy-efficient, and disposable, was modified with tungsten disulfide nanosheets/hydroxylated multi-walled carbon nanotubes (WS₂/MWCNTs-OH) to improve electrocatalytic performance and sensitivity. The surface morphology, structure, and electrochemical property of WS₂/MWCNTs-OH composite film were characterized by emission scanning electron microscopy, transmission electron microscopy, energy dispersive spectroscopy, X-ray diffraction, Raman spectroscopy, and electrochemical impedance spectroscopy. Grass carp kidney cell line was utilized as the sensor biorecognition element to determine the electrochemical signals and evaluate cell viability. The sensor was used to detect the toxicity of one typical contaminant (2,4,6-trichlorophenol) and two emerging contaminants (bisphenol AF and polystyrene nanoplastics). The 48 h half inhibitory concentration (IC₅₀) values were 169.96 μM, 21.88 μM, and 123.01 μg mL^-1, respectively, which were lower than those of conventional MTT assay, indicating the higher sensitivity of the proposed sensor. Furthermore, the practical application of the sensor was evaluated in chemical wastewater samples. This study provides an up-and-coming tool for environmental toxicity monitoring.

The Fusion of Microfluidics and Optics for On-Chip Detection and Characterization of Microalgae

It has been demonstrated that microalgae play an important role in the food, agriculture and medicine industries. Additionally, the identification and counting of the microalgae are also a critical step in evaluating water quality, and some lipid-rich microalgae species even have the potential to be an alternative to fossil fuels. However, current technologies for the detection and analysis of microalgae are costly, labor-intensive, time-consuming and throughput limited. In the past few years, microfluidic chips integrating optical components have emerged as powerful tools that can be used for the analysis of microalgae with high specificity, sensitivity and throughput. In this paper, we review recent optofluidic lab-on-chip systems and techniques used for microalgal detection and characterization. We introduce three optofluidic technologies that are based on fluorescence, Raman spectroscopy and imaging-based flow cytometry, each of which can achieve the determination of cell viability, lipid content, metabolic heterogeneity and counting. We analyze and summarize the merits and drawbacks of these micro-systems and conclude the direction of the future development of the optofluidic platforms applied in microalgal research.

A margin of safety approach for the assessment of environmentally realistic chemical mixtures in the marine environment based on combined passive sampling and ecotoxicity testing

Organisms in the marine environment are being exposed to an increasing variety of chemicals. This research presents an effect-based monitoring method for the derivation of a margin of safety for environmentally realistic chemical mixtures. The method is based on a combination of passive sampling and ecotoxicity testing. First, passive sampling was performed using H₂O-philic divinylbenzene Speedisks during 3 sampling campaigns between 2016 and 2018 at 4 sampling locations in the Belgian part of the North Sea. Next, we exposed the marine diatom Phaeodactylum tricornutum to Speedisk extracts that were reconstituted in HPLC-grade water and defined the MoS of each sample as the highest no-observed effect concentration, expressed as relative enrichment factor (REF). A REF was defined by comparing the concentrations of 89 personal care products, pesticides and pharmaceuticals in the biotest medium with those measured in water grab samples to relate exposure concentrations in the tests to environmental concentrations. Across eight marine samples, diatom growth inhibition was observed at REF ≥ 3.2 and margins of safety were found between REF 1.1-11.0. In addition, we found that reconstitution of extracts in HPLC-water was suitable to overcome the solvent-related challenges in biotesting that are usually associated with passive sampler extract spiking, whilst it still allowed REFs up to 44 in the biotest medium to be achieved. This method, however, likely covers mainly the polar fraction of environmentally realistic chemical mixtures and less the non-polar fraction. Nevertheless, for 5 out of 8 samples, the Margin of Safety (MoS) was found to be lower than 10, which represents the typically lowest possible assessment factor applied to no effects ecotoxicological data in conventional environmental risk assessments, suggesting ecological risks for these samples.

The Combined Algae Test for the Evaluation of Mixture Toxicity in Environmental Samples

The combined algae test is a 96-well plate-based algal toxicity assay with the green algae Raphidocelis subcapitata that combines inhibition of 24-h population growth rate with inhibition of photosynthesis detected after 2 and 24 h with pulse-amplitude modulated (PAM) fluorometry using a Maxi-Imaging PAM. The combined algae test has been in use for more than a decade but has had limitations due to incompatibilities of the measurements of the 2 biological endpoints on the same microtiter plates. These limitations could be overcome by increasing growth rates and doubling times on black, clear-bottom 96-well plates by application of dichromatic red/blue light-emitting diode illumination. Different robotic dosing approaches and additional data evaluation methods helped to further expand the applicability domain of the assay. The combined algae test differentiates between nonspecifically acting compounds and photosynthesis inhibitors, such as photosystem II (PSII) herbicides. The PSII herbicides acted immediately on photosynthesis and showed growth rate inhibition at higher concentrations. If growth was a similar or more sensitive endpoint than photosynthesis inhibition, this was an indication that the tested chemical acted nonspecifically or that a mixture or a water sample was dominated by chemicals other than PSII herbicides acting on algal growth. We fingerprinted the effects of 45 chemicals on photosynthesis inhibition and growth rate and related the effects of the single compounds to designed mixtures of these chemicals detected in water samples and to the effects directly measured in water samples. Most of the observed effects in the water samples could be explained by known photosystem II inhibitors such as triazines and phenylurea herbicides. The improved setup of the combined algae test gave results consistent with those of the previous method but has lower costs, higher throughput, and higher precision. Environ Toxicol Chem 2020;39:2496-2508. © 2020 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Advancements in effect-based surface water quality assessment

Legally-prescribed chemical monitoring is unfit for determining the pollution status of surface waters, and there is a need for improved assessment methods that consider the aggregated risk of all bioavailable micropollutants present in the aquatic environment. Therefore, the present study aimed to advance effect-based water quality assessment by implementing methodological improvements and to gain insight into contamination source-specific bioanalytical responses. Passive sampling of non-polar and polar organic compounds and metals was applied at 14 surface water locations that were characterized by two major anthropogenic contamination sources, agriculture and wastewater treatment plant (WWTP) effluent, as well as reference locations with a low expected impact from micropollutants. Departing from the experience gained in previous studies, a battery of 20 in vivo and in vitro bioassays was composed and subsequently exposed to the passive sampler extracts. Next, the bioanalytical responses were divided by their respective effect-based trigger values to obtain effect-based risk quotients, which were summed per location. These cumulative ecotoxicological risks were lowest for reference locations (4.3-10.9), followed by agriculture locations (11.3-27.2) and the highest for WWTP locations (12.8-47.7), and were mainly driven by polar organic contaminants. The bioanalytical assessment of the joint risks of metals and (non-)polar organic compounds resulted in the successful identification of pollution source-specific ecotoxicological risk profiles: none of the bioassays were significantly associated with reference locations nor with multiple location types, while horticulture locations were significantly characterized by anti-AR and anti-PR activity and cytotoxicity, and WWTP sites by ERα activity and toxicity in the in vivo bioassays. It is concluded that the presently employed advanced effect-based methods can readily be applied in surface water quality assessment and that the integration of chemical- and effect-based monitoring approaches will foster future-proof water quality assessment strategies on the road to a non-toxic environment.

Herbicide Exposure and Toxicity to Aquatic Primary Producers

The aim of the present review was to give an overview of the current state of science concerning herbicide exposure and toxicity to aquatic primary producers. To this end we assessed the open literature, revealing the widespread presence of (mixtures of) herbicides, inevitably leading to the exposure of non-target primary producers. Yet, herbicide concentrations show strong temporal and spatial variations. Concerning herbicide toxicity, it was concluded that the most sensitive as well as the least sensitive species differed per herbicide and that the observed effect concentrations for some herbicides were rather independent from the exposure time. More extensive ecotoxicity testing is required, especially considering macrophytes and marine herbicide toxicity. Hence, it was concluded that the largest knowledge gap concerns the effects of sediment-associated herbicides on primary producers in the marine/estuarine environment. Generally, there is no actual risk of waterborne herbicides to aquatic primary producers. Still, median concentrations of atrazine and especially of diuron measured in China, the USA and Europe represented moderate risks for primary producers. Maximum concentrations due to misuse and accidents may even cause the exceedance of almost 60% of the effect concentrations plotted in SSDs. Using bioassays to determine the effect of contaminated water and sediment and to identify the herbicides of concern is a promising addition to chemical analysis, especially for the photosynthesis-inhibiting herbicides using photosynthesis as endpoint in the bioassays. This review concluded that to come to a reliable herbicide hazard and risk assessment, an extensive catch-up must be made concerning macrophytes, the marine environment and especially sediment as overlooked and understudied environmental compartments.

Smarter Sediment Screening: Effect-Based Quality Assessment, Chemical Profiling, and Risk Identification

Sediments play an essential role in the functioning of aquatic ecosystems but simultaneously retain harmful compounds. However, sediment quality assessment methods that consider the risks caused by the combined action of all sediment-associated contaminants to benthic biota are still underrepresented in water quality assessment strategies. Significant advancements have been made in the application of effect-based methods, but methodological improvements can still advance sediment risk assessment. The present study aimed to explore such improvements by integrating effect-monitoring and chemical profiling of sediment contamination. To this end, 28 day life cycle bioassays with Chironomus riparius using intact whole sediment cores from contaminated sites were performed in tandem with explorative chemical profiling of bioavailable concentrations of groups of legacy and emerging sediment contaminants to investigate ecotoxicological risks to benthic biota. All contaminated sediments caused effects on the resilient midge C. riparius, stressing that sediment contamination is ubiquitous and potentially harmful to aquatic ecosystems. However, bioassay responses were not in line with any of the calculated toxicity indices, suggesting that toxicity was caused by unmeasured compounds. Hence, this study underlines the relevance of effect-based sediment quality assessment and provides smarter ways to do so.

Effect-based nationwide surface water quality assessment to identify ecotoxicological risks

A large portion of the toxic effects observed in surface waters cannot be attributed to compounds regularly measured by water authorities. Hence, there is an urgent need for an effect-based monitoring strategy that employs bioassays to identify environmental risks. The aim of the present study was to perform an effect-based nationwide water quality assessment to identify ecotoxicological risks in a wide variety of surface waters. At 45 locations silicone rubbers and polar organic chemical integrative samplers were exposed to surface water for 6 weeks. Alongside the passive samplers an in-situ daphnid test was performed. Subsequent to field exposure, accumulated compounds were extracted from the passive samplers after which a battery of in vivo and in vitro bioassays was exposed to the extracts. The bioassay battery was selected such that it could identify the risks posed by a wide range of chemical pollutants and their transformation products, while simultaneously allowing for targeted identification of groups of compounds that cause specific effects. Bioassay responses were compared to effect-based trigger values to identify potential ecotoxicological risks at the investigated locations. Responses were observed in all bioassays, and trigger values were exceeded in 9 out of the 21 applied assays, allowing for ranking of the investigated locations based on ecotoxicological risks. No relationship between land use and the identification of ecotoxicological risks was observed. Based on the results, considerations regarding future improvements of effect-based monitoring are given. It is concluded that effect-based water quality assessment allowed prioritization of sites based on ecotoxicological risks, identified the presence of hazardous compounds regardless of being listed as priority substances, and meanwhile could prevent costly chemical analysis at sites with low ecotoxicological risks.

Physiological and enzymatic responses of Chlorella vulgaris exposed to produced water and its potential for bioremediation

In South America, Colombia is known as an important oil-producing country. However, the environmental impact of crude oil industry has not been studied deeply and few studies have been carried out for evaluating responses of algae and its adaptation under specific conditions. Enzymatic and physiological effects in Chlorella vulgaris and its potential for bioremediation after exposure to produced water (PW) were assessed using different PW concentrations (0, 25, 50, 75 and 100%) and crude oil. Variables such as cell density, growth rate (μ), percentage of growth inhibition (% I), chlorophyll a and b and cell diameter were evaluated during 5 days. Furthermore, enzymatic biomarkers such as superoxide dismutase (SOD) and catalase (CAT) were also measured. Results showed that the treatment with 100% PW had the highest cell density and μ; similarly, 25% PW treatment had a similar behaviour, being these two treatments with the highest growth. A dose-dependent response was seen for chlorophyll a and b and cell diameter, showing significant differences between treatments and the control. Different levels of SOD and CAT were observed in algae exposed to PW. At 24 h, an increase in SOD and CAT activity was observed, probably due to effects caused by xenobiotics. After 72 h, a decrease in the activity of both enzymes was observed. The results evidenced that C. vulgaris can adapt easily to PW, showing an increase on its growth and stabilisation in its antioxidant activity. Additionally, cell diameter results and decrease of hydrocarbons and phenols show the potential of these algae to degrade xenobiotics from PW.