Tradescantia as a biomonitor for genotoxicity evaluation of diesel and biodiesel exhaust emissions

Assessment of genotoxicity of air pollution in urban areas using an integrated model of passive biomonitoring

Atmospheric pollution is a major public health issue and has become increasingly critical for human health. Urban atmospheric pollution is typically assessed through physicochemical indicators aligned with environmental legislation parameters, providing data on air quality levels. While the effects of pollution on sensitive organisms serve as a warning for public health decision-makers, there remains a need to explore the interpretation of environmental data on pollutants. The use of species adapted to urban environments as sentinels enables continuous and integrated monitoring of environmental pollution implications on biological systems. In this study, we investigated the use of the plant species Tradescantia pallida as a biomonitor to evaluate the genotoxic effects of atmospheric pollution under diverse vehicular traffic conditions. T. pallida was strategically planted at the leading urban intersections in Uberlândia, Brazil. During COVID-19 pandemic lockdowns, we compared indicators such as physical, biological, and traffic data at different intersections in residential and commercial zones. The reduction in vehicular traffic highlighted the sensitivity of plant species to changes in air and soil pollutants. T. pallida showed bioaccumulation of heavy metals Cd and Cr in monitored areas with higher traffic levels. Additionally, we established a multiple linear regression model to estimate genotoxicity using the micronucleus test, with chromium concentration in the soil (X1) and particulate matter (PM) in the atmosphere (X2) identified as the primary independent variables. Our findings provide a comprehensive portrait of the impact of vehicular traffic changes on PM and offer valuable insights for refining parameters and models of Environmental Health Surveillance.

Effect of carbonaceous components of biodiesel combustion particles on optical properties

This paper studies the influence of carbonaceous components on the optical properties of particulate matter (PM) in biodiesel combustion by conducting a bench test on an electronically controlled high-pressure common-rail diesel engine. In addition, the PM produced by the combustion of diesel oil, soybean oil methyl ester (SME), waste edible oil methyl ester (WME), and palm oil methyl ester (PME) was collected. The carbonaceous composition and optical properties of diesel and three biodiesel particulates were then analyzed. The obtained results showed that the ratio of organic carbon (OC) to total carbon (TC) in diesel PM was 0.25 and the ratio of OC/EC was 0.33. The OC to TC ratio of biodiesel PM was significantly greater than that of diesel PM, ranging between 0.59 and 0.65, with OC/EC values in the range of 1.44-1.86. The mass absorption cross-section (MAC) values of three kinds of biodiesel particles were all higher than those of diesel particles. When the incident laser wavelength increased, the difference of MAC values among four kinds of fuel particles gradually decreased. The MAC values of all the three biodiesel particles were higher than those of the diesel particles, and the difference between the MAC values of the four fuel particles gradually decreased with the increase of the incident laser wavelength. Afterwards, the "shell-core" model of particles was developed with 80 nm EC sphere as the core. At the two refractive indices, the scattering cross section, absorption cross section, and extinction cross section of the particles decrease with the increase of the incident light wavelength, and the scattering cross section, absorption cross section, and extinction cross section of the particles increase with the increase of the OC coating thickness.

Assessment of the mutagenic potential of the water of an urban river by means of two Tradescantia-based test systems

River pollution can be caused by anthropogenic or natural factors. When testing water quality for the presence of toxic substances, higher plants as bioindicators for the genotoxic effects of complex mixtures are effective and appropriate. Hence, in this work the Tradescantia (clone 02) stamen hair mutations (Trad-SHM) and Tradescantia micronuclei (Trad-MCN) were used to determine mutagenic and clastogenic potential of an urban river. A significant increase in the level of all studied endpoints as well as morphological changes, including pink cells (PC) and colorless cells (CC) in stamen hairs, stunted hairs (SH), tetrads with micronuclei (MN) and MN in tetrads of pollen microspores in the Tradescantia was observed compared to the negative control (tap water). As an example riverine system, part of the River Hrazdan (Armenia) flowing through a highly urbanized and industrial area was studied. The positive control (10 mM CrO₃) showed the highest genotoxicity for the SHM assay (PC: 5.1 / 1000, CC: 17.9 / 1000) and for the MCN assay (12 MN / 100 tetrads and 9.4 ± 0.53 tetrads with MN). Genetic responses were analyzed in conjunction with the concentrations of select elements in the riverine water. Reasons for observing such a high level of genetic markers in the riverine water and applicability of the Tradescantia (clone 02) test-systems in environmental risk assessment and biomonitoring are discussed.

Cladonia verticillaris (lichen) indicates negative impacts derived from the combustion of biodiesel blends: an alert for the environmental management for biofuels use

The use of biodiesel blends with petroleum diesel in vehicular engines demands the evaluation of the possible impacts and effects of the gases emitted from their combustion on the environment. Among studies on these questions, biomonitoring using lichens is a viable alternative, given their interactions with the elements dispersed in the atmosphere, as well as its sensitivity and capacity to retain contaminants. In this study, we analyzed the effects of gas emissions from the combustion of biodiesel mixture with petroleum diesel on Cladonia verticillaris thalli. Samples of the lichen (10 g) were exposed to the gases emitted by the exhaust of the generator engine during the combustion process of biodiesel mixtures to petroleum diesel (7% (B7), 10% (B10), 40% (B40), 50% (B50), and 70% (B70)). At 90 days after exposure, samples were analyzed for n-alkane profiles, thallus morphology, photosynthetic pigment contents, and secondary lichen metabolites (protocetraric and fumarprotocetraric acids). Sets B7 and B10 showed better resistance of the lichen to pollutants. Set B40 showed a high stress evidenced by the chain elongation of n-alkanes structure and high chlorophyll production, presenting high morphological damages when compared to the control sets, B7 and B10. The results showed significant reductions of n-alkanes profiles for mixtures with high concentrations of biodiesel (B50 and B70), as well as decreases in the chlorophyll content. These groups showed an increase in the synthesis of secondary metabolites, corroborating the hypothesis that high concentrations of biodiesel in the mixture with petroleum diesel have greater impacts on the lichen. Schematic model for demonstration of using the lichen Cladonia verticillaris as biomonitor of effects from gas emissions from the combustion of biodiesel blends with petroleum diesel by a stationary engine.

Cyto-genotoxic potential of petroleum refinery wastewater mixed with domestic sewage used for irrigation of food crops in the vicinity of an oil refinery

Petroleum refinery wastewater combined with domestic sewage were collected from the open channel in the vicinity of Mathura oil refinery, UP (India) and analysed by inductively coupled plasma optical emission spectrometry (ICP-OES) and gas chromatography-mass spectrometry (GC-MS) for elemental analysis and organic pollutants, respectively. Several potentially toxic and non-toxic elements were found to be present in the wastewater samples. GC-MS analysis revealed the presence of several organic contaminants including pesticides. Wastewater samples were extracted using amberlite XAD4/8 resins and liquid-liquid extraction procedures using different organic solvents. The extracts were tested for their cyto-genotoxic potential using bacterial (Salmonella mutagenicity test, E. coli K-12 DNA repair defective mutants, Bacteriophage λ assay) and plant (Vigna mungo phytotoxicity test, Allium cepa chromosomal aberration assay) systems. A significant increase was observed in the number of revertants of TA97a, TA98 and TA100 strains with the test samples and XAD concentrated samples were found to be more mutagenic than liquid-liquid extracts. Colony forming units (CFUs) of DNA repair defective mutants of E. coli K-12 recA, lexA and polA declined significantly as compared to their isogenic wild-type counterparts with the test samples. Significant reduction in plaque forming units (PFUs) of bacteriophage λ was also found on treatment with the solvent extracts. Presence of several toxic pollutants in the wastewater apply prohibitive action on the seed germination process. Germination rate of Vigna mungo seeds as well as radicle and plumule lengths were found to be affected when treated with different concentration of wastewater as compared to control. Present study also indicated concentration dependent reduction in mitotic index of A. cepa i.e., 16.38% at 5% and 9.74% at 100% wastewater and percentage of aberrant cells were highest at 100% effluent. Present findings indicated that mutagenicity/genotoxicity of wastewater is due to the mixture of genotoxins; poses serious hazards to the receiving waterbodies which require continuous monitoring and remedial measures for their improvement.

Analysis of genotoxic effects on plants exposed to high traffic volume in urban crossing intersections

A biological assessment of environmental quality was performed using the tropical plant species Tradescantia pallida (Rose) D.R. Hunt. var. purpurea exposed to different levels of air contamination in urban intersections with high volume of vehicle traffic. Air quality (average daily levels of particulate material in the PM_{1, 2.5, 10} fractions) and traffic volume in crossing intersections were monitored for 30 days before the collection of plants. Frequency of micronuclei and pollen abortivity in inflorescences collected at different intersections with gradual levels of traffic volume were evaluated as biomarkers of genotoxicity. In addition, the concentrations of bioaccumulated heavy metals in the leaves of the collected plants were also investigated. The proposed biological assessment model found a positive association between the environmental variables (traffic volume; concentration of particulate material) and biological effects (leaf concentration of Cr and Cd; micronucleus frequencies and pollen abortivity).

Influence of wood species on toxicity of log-wood stove combustion aerosols: a parallel animal and air-liquid interface cell exposure study on spruce and pine smoke

Background

Wood combustion emissions have been studied previously either by in vitro or in vivo models using collected particles, yet most studies have neglected gaseous compounds. Furthermore, a more accurate and holistic view of the toxicity of aerosols can be gained with parallel in vitro and in vivo studies using direct exposure methods. Moreover, modern exposure techniques such as air-liquid interface (ALI) exposures enable better assessment of the toxicity of the applied aerosols than, for example, the previous state-of-the-art submerged cell exposure techniques.

Methods

We used three different ALI exposure systems in parallel to study the toxicological effects of spruce and pine combustion emissions in human alveolar epithelial (A549) and murine macrophage (RAW264.7) cell lines. A whole-body mouse inhalation system was also used to expose C57BL/6 J mice to aerosol emissions. Moreover, gaseous and particulate fractions were studied separately in one of the cell exposure systems. After exposure, the cells and animals were measured for various parameters of cytotoxicity, inflammation, genotoxicity, transcriptome and proteome.

Results

We found that diluted (1:15) exposure pine combustion emissions (PM₁ mass 7.7 ± 6.5 mg m^− 3, 41 mg MJ^− 1) contained, on average, more PM and polycyclic aromatic hydrocarbons (PAHs) than spruce (PM₁ mass 4.3 ± 5.1 mg m^− 3, 26 mg MJ^− 1) emissions, which instead showed a higher concentration of inorganic metals in the emission aerosol. Both A549 cells and mice exposed to these emissions showed low levels of inflammation but significantly increased genotoxicity. Gaseous emission compounds produced similar genotoxicity and a higher inflammatory response than the corresponding complete combustion emission in A549 cells. Systems biology approaches supported the findings, but we detected differing responses between in vivo and in vitro experiments.

Conclusions

Comprehensive in vitro and in vivo exposure studies with emission characterization and systems biology approaches revealed further information on the effects of combustion aerosol toxicity than could be achieved with either method alone. Interestingly, in vitro and in vivo exposures showed the opposite order of the highest DNA damage. In vitro measurements also indicated that the gaseous fraction of emission aerosols may be more important in causing adverse toxicological effects. Combustion aerosols of different wood species result in mild but aerosol specific in vitro and in vivo effects.

Optical determination of black carbon mass concentrations in snow samples: A new analytical method

Black carbon (BC) aerosols in the atmosphere strongly affect direct radiative forcing and climate, not only while suspended in the atmosphere but also after deposition onto high albedo surfaces. Snow surfaces are especially sensitive to BC deposition, because of their high surface albedo and additional positive feedbacks further enhance faster snowpack melting caused by BC deposition, resulting in modifications in water resources and recession of glaciers. For the analysis of BC deposition on snow, a precise quantification of BC mass is needed. Instead, optical methods have the potential of quantifying only BC, based on its characteristic spectral absorption. Commercial optical transmissometers commonly use quartz filters to filter BC and measure its optical attenuation. They are calibrated for the determination of BC mass concentrations in air, but not adapted or calibrated for their determination in water or snowmelt samples. Additionally, they are generally calibrated using BC-simulating materials that are not representative of ambient BC particles. Here, a new analytical method is demonstrated for the quantitative determination of BC mass concentration in snow samples that considers filtering of melted snow with polycarbonate filters in a new device, and optical filter attenuation BC mass concentration measurement (880 nm). The attenuation can be obtained with any optical equipment that can measure the 880-nm attenuation of filters impacted with BC/snow impurities. This method has been calibrated using real diesel vehicle exhaust soot with well-known optical properties as reference material, yielding a multipoint calibration curve for common BC concentration levels in snow. The limits of detection (0.011 mg of BC), quantification (0.036 mg of BC) and reproducibility (96.39%) of this new analytical method have been determined. Real surface snow samples collected at different locations in "Los Andes" mountains of Chile were measured with this method given a BC concentrations ranged from 151 to 5987 μg kg^-1.