Temperature dependence of characteristics of organic precursors, bromide, and disinfection byproduct formation

Analysis of brominide disinfection by-products (DBPs) in aquaculture water using ultra-high performance liquid chromatography-quadrupole-time of flight mass spectrometry (UPLC-Q-tof/MS)

BACKGROUND

halogenic disinfectants have been shown to produce toxic and carcinogenic disinfection by-products in the water disinfection process. Dibromohydantoin (DBDMH) is a commonly used water disinfectant in aquaculture. Aquaculture water has more complex matrix, and the analytical method for disinfection by-products (DBPs) have not been reported. Since the content of DBPs is related to the external conditions such as ultraviolet irradiation, temperatures, pH and humic acid. The semi-target screening method for mainly DBPs based on tracing mass spectrometry fragments of bromide and accurate mass of high resolution mass spectrometry was established by ultra performance liquid chromatography-quadrupole-time of flight-mass spectrometry (UPLC-Q-tof/MS). Br-DBPs as a important class of DBPs from DBDMH, which quantification analysis methods were developed based on accurate mass of high resolution mass spectrometry.

METHODS

through screening method to identify unknown Br-DBPs and quantitative analysis of the typical 4-bromophenol by-product of accurate mass was established. The conditions of the instrument parameters of mass spectrometry and SPE sample preparation procedure in complex real sample were optimized. The high efficiency method was demonstrated for the determination of Br-DBPs with a good linear correlation (R2 = 0.999) in the range of 0.500-200 μg L-1 and limit of detections (LODs) and limit of quantifications (LOQs) were 0.0250 ng L-1 and 0.0834 ng L-1, respectively.

CONCLUSION

the developed screening and quantification analytical strategy for Br-DBPs is rapid, accurate and sensitivity applicable for environmental in aquaculture water monitoring.

Reduced formation of brominated trihalomethanes during chlorination of bromide-containing waters in the presence of Mn(II)

Manganese(II) (Mn(II)) and bromide (Br-) are common in natural waters. This study investigated the effect of in-situ Mn(II) oxidation and preformed MnOx on the brominated trihalomethane (Br-THM) formation during chlorination of bromide-containing waters. The results showed Br-THM formation could be substantially inhibited by in-situ Mn(II) oxidation, but the addition of preformed MnOx had limited influence on Br-THM formation during chlorination of bromide-containing waters. Analysis of bromine species showed that about 30 % bromine species were incorporated into the MnOx particles and formed MnOx-Br during the in-situ Mn(II) oxidation process. Consequently, the availability of reactive bromine species for the reaction with dissolved organic matter (DOM) reduced, leading to less Br-THM formation. X-ray diffraction (XRD) analysis of in-situ Mn(II) oxidation product indicated the presence of Br- decreased the crystallinity of Mn oxides, verifying the bromine species entered MnOx crystal. However, the adsorptive uptake of bromine species by preformed MnOx was negligible and had no impact on Br-THM formation. Inhibition rate of Mn(II) oxidation on THM formation decreased with increasing specific ultraviolet absorbance (SUVA254) value of filtered water, showing SUVA254 could be a good indicator of DOM competition ability for oxidant with Mn(II). In addition, Excitation/Emission Matrix indicated that Mn(II) could form complexes with humic substances, which might also retard the reaction between humic substances and oxidant to form Br-THMs. This study highlighted the inhibiting effect of in-situ Mn(II) oxidation on Br-THM formation during chlorination of bromide-containing waters.

Response mechanism of soil leachate and disinfection by-product formation to extreme precipitation events under continuous drought scenario

In this study, a rainfall simulation device was employed to investigate the response mechanism of soil leachate and disinfection by-products formation potential (DBPsFP) to extreme precipitation events. The results revealed that the aromaticity of dissolved organic matter (DOM) and the concentration of hydrophobic DOM containing aromatic carbon groups in leachate decreased with rising temperature. The humification degree of DOM decreased at 25 °C (99 mm/h), while the humification degree and protein-like level of DOM increased under high temperatures droughts (45 °C and 65 °C). Higher temperatures resulted in the leach of more microbial-derived humus and low molecular phenolic compounds from soil and broadened the range of molecular weight distribution. Increasing temperature increased DBPsFP and DBPs species and caused the precursors of haloacetic acids (HAAs) in leachate to become more hydrophobic, while the precursors of trihalomethanes (THMs) became more hydrophilic. Most importantly, the increased temperature attenuated the rainfall-mediated dilution of organic pollutant concentration, and temperature has a more significant effect than extreme rainfall in DOM abundance and the formation potential (or species) of DBPs. The results help to better understand the impact of climate change on the physicochemical processes of water quality.

Rainwater extracting characteristics and its potential impact on DBPs generation: A case study

Frequent extreme precipitation events due to global warming can lead to large amounts of pollutants entering source water bodies via surface runoff and wet deposition, thus posing a threat to water supply security. In order to better understand the source characteristics and leaching mechanisms of rainwater dissolved organic matter (DOM), as well as its disinfection by-products formation potential (DBPsFP) during disinfection processes, rainwater samples were collected and extracting experiments were conducted. Three components were identified in rainwater through Parallel factor (PARAFAC) analysis, which were microbial humic-like component C1 (63.1 %), protein (tryptophan-like) component C2 (28.9 %), marine or terrestrial humic-like component C3 (8.1 %). The average molecular weight of rainwater fractions was ordered: hydrophobic neutral (HON) < hydrophobic bases (HOB) < hydrophobic acidic (HOA) < hydrophilic (HIS). The HOA and HON fractions of rainwater were the dominant precursors of trihalomethanes (THMs), while the rainwater HON fraction and hydrophilic fraction were the main precursor of haloacetic acids (HAAs) and trihloroacetonitrile (TCAN), respectively. Subsoil extracts had a higher concentration of dissolved organic carbon (DOC) and total dissolved nitrogen (TDN) than topsoil extracts. Partial least squares path modeling (PLS-PM) demonstrated that the extraction temperature was the dominant factor affecting the abundance of DOM in the topsoil extracts (R2 = 0.28), while the extraction time accounted more for the abundance of fluorescence substance and physicochemical indices in the subsoil extracts (R2 = 0.23 and 0.32, respectively). These results provide key information for controlling the impacts of global warming, in particular the risk of water sources being heavily contaminated by request rainfalls.

Development of adaptive neuro-fuzzy inference system model for predict trihalomethane formation potential in distribution network simulation test

Trihalomethanes (THMs), which is one of the major classes of DBP known to be highly cytotoxic and genotoxic, were formed and modeled under controlled conditions by laboratory-scale distribution network simulation test. The formation potentials of THM depending on the parameters such as natural organic matter, bromide, chlorine, pH, and contact time were determined. Subsequently, the Adaptive Neuro-Fuzzy Inference System (ANFIS) model was developed using these parameters as inputs and THM formation potentials as output, and the correlation coefficient was 0.9817. In the range of the inputs, the ANFIS model representing the simulation test results were compared with THM formations of an actual distribution network system in dry and wet seasons. As a result, the predictions of the ANFIS model were little affected by the unidentified factors that were not used in model training but are known to affect THM formations in real waters and gave more consistent results than the EPA model.

Temporospatial variation and health risk assessment of trihalomethanes (THMs) in drinking water (northwest Iran)

Trihalomethanes (THMs) are one of the most common classes of disinfection by-products. In this study, the temporospatial trends and health risks due to exposure to THMs in the Tabriz water distribution network were investigated. THM series were analyzed using gas chromatography equipped with electron capture detector. The non-carcinogenic and carcinogenic risks due to exposure to THMs were calculated using Monte Carlo simulations. Mean concentrations of THMs in winter and spring were 10.2 ± 9.3 μg/l and 252 ± 185.9 μg/l, respectively. More than 80% of THMs identified were bromodichloromethane. The mean values of lifetime cancer risk (LTCR) of THMs were calculated as 4.23E-06 and 2.38E-04 for winter and spring, respectively. This study showed that there were noticeable levels of THMs in Tabriz water distribution network, especially in the center of the city. Although the non-cancer risk through THMs was below permissible recommended levels, the cancer risk likely remains due to high levels of THMs in some locations.

Cumulative risk analysis of carcinogenic contaminants in United States drinking water

Cumulative risk analysis of contaminant occurrence in United States drinking water for the period of 2010-2017 indicates that over 100,000 lifetime cancer cases could be due to carcinogenic chemicals in tap water. The majority of this risk is due to the presence of arsenic, disinfection byproducts and radioactive contaminants. For different states within the U.S., cumulative cancer risk for drinking water contaminants ranges between 1 × 10^-4 and 1 × 10^-3, similar to the range of cumulative cancer risks reported for air pollutants. Overall, national attributable risk due to tap water contaminants is approximately 4 × 10^-4, which is two orders of magnitude higher than the de minimus cancer risk of one-in-a-million. Thus, decreasing the levels of chemical contaminants in drinking water represents an important opportunity for protecting public health.