Efficient reduction of nitrobenzene by sulfate-reducer enriched biocathode in microbial electrolysis cell

A combination of microbial electrolysis cells and bioaugmentation can effectively treat synthetic wastewater containing polycyclic aromatic hydrocarbon

The anaerobic biodegradation of polycyclic aromatic hydrocarbons (PAHs) is challenging due to its toxic effect on the microbes. Microbial electrolysis cells (MECs), with their excellent characteristics of anodic and cathodic biofilms, can be a viable way to enhance the biodegradation of PAHs. This work assessed different cathode materials (carbon brush and nickel foam) combined with bioaugmentation on typical PAHs-naphthalene biodegradation and analyzed the inhibition amendment mechanism of microbial biofilms in MECs. Compared with the control, the degradation efficiency of naphthalene with the nickel foam cathode supplied with bioaugmentation dosage realized a maximum removal rate of 94.5 ± 3.2%. The highest daily recovered methane yield (227 ± 2 mL/gCOD) was also found in the nickel foam cathode supplied with bioaugmentation. Moreover, the microbial analysis demonstrated the significant switch of predominant PAH-degrading microorganisms from Pseudomonas in control to norank_f_Prolixibacteraceae in MECs. Furthermore, hydrogentrophic methanogenesis prevailed in MEC reactors, which is responsible for methane production. This study proved that MEC combined with bioaugmentation could effectively alleviate the inhibition of PAH, with the nickel foam cathode obtaining the fastest recovery rate in terms of methane yield.

Geobacter sulfurreducens promoted the biosynthesis of reduced graphene oxide and coupled it for nitrobenzene reduction

In order to explore an efficient and green method to deal with nitrobenzene (NB) pollutant, reduced graphene oxide (rGO) as an electron shuttle was applied to enhance the extracellular electron transfer (EET) process of Geobacter sulfurreducens, which was a typical electrochemically active bacteria (EAB). In this study, rGO biosynthesis was achieved via the reduction of graphene oxide (GO) by G. sulfurreducens PCA within 3 days. Also, the rGO-PCA combining system completely reduced 50-200 µmol/L of NB to aniline as end product within one day. SEM characterization revealed that PCA cells were partly wrapped by rGO, and therefore the distance of electron transfer between strain PCA and rGO material was reduced. Beside, the ID/IG of GO, rGO, and rGO-PCA combining system were 0.990, 1.293 and 1.31, respectively. Moreover, highest currents were observed in rGO-PCA-NB as 12.950 µA/-12.560 µA at -408 mV/156 mV, attributing to the faster electron transfer efficiency in EET process. Therefore, the NB reduction was mainly due to: (I) direct EET process from G. sulfurreducens PCA to NB; (II) rGO served as electron shuttle and accelerated electron transfer to NB, which was the main degradation pathway. Overall, the biosynthesis of rGO via GO reduction by Geobacter promoted the NB removal process, which provided a facile strategy to alleviate the problematic nitroaromatic pollution in the environment.

Autotrophic degradation of sulfamethoxazole using sulfate-reducing biocathode in microbial photo-electrolysis system

Sulfamethoxazole is a representative of sulfonamide antibiotic pollutants. This study aims to investigate the degradation pathways of sulfamethoxazole and the response of microbial communities using the autotrophic biocathode in microbial photo-electrolysis systems (MPESs). Sulfamethoxazole with an initial concentration of 2 mg L-1 was degraded into small molecule propanol within 6 h with the biocathode. Elemental sulfur (S0) was detected in the cathode chamber, accounting for 57 % of the removed sulfate. The conversion from sulfate to S0 indicated that autotrophic microorganisms might adopt a novel pathway for sulfamethoxazole removal in the MPES. In the abiotic cathode, sulfamethoxazole degradation rate was 0.09 mg L-1 h-1 with the electrochemistry process. However, sulfamethoxazole was converted to products that still contain benzene rings, including p-aminothiophenol, 3-amino-5-methylisoxazole, and sulfonamide. The microbial community analysis indicated that the synergistic interaction of Desulfovibrio and Acetobacterium promoted the autotrophic degradation of sulfamethoxazole. The results suggested that autotrophic microorganisms may play an important role in the environmental transformation of sulfamethoxazole.

Enhancement of medium-chain fatty acids production from sludge anaerobic fermentation liquid under moderate sulfate reduction

In recent years, there has been a marked increase in the production of excess sludge. Chain-elongation (CE) fermentation presents a promising approach for carbon resource recovery from sludge, enabling the transformation of carbon into medium-chain fatty acids (MCFAs). However, the impact of sulfate, commonly presents in sludge, on the CE process remains largely unexplored. In this study, batch tests for CE process of sludge anaerobic fermentation liquid (SAFL) under different SCOD/SO42- ratios were performed. The moderate sulfate reduction under the optimum SCOD/SO42- of 20:1 enhanced the n-caproate production, giving the maximum n-caproate concentration, selectivity and production rate of 5.49 g COD/L, 21.4% and 4.87 g COD/L/d, respectively. The excessive sulfate reduction under SCOD/SO42- ≤ 5 completely inhibited the CE process, resulting in almost no n-caproate generation. The variations in n-caproate production under different conditions of SCOD/SO42- were all well fitted with the modified Gompertz kinetic model. Alcaligenes and Ruminococcaceae_UCG-014 were the dominant genus-level biomarkers under moderate sulfate reduction (SCOD/SO42- = 20), which enhanced the n-caproate production by increasing the generation of acetyl-CoA and the hydrolysis of difficult biodegradable substances in SAFL. The findings presented in this work elucidate a strategy and provide a theoretical framework for the further enhancement of MCFAs production from excess sludge.

Evaluating the inhibitory effects of Nitrobenzene short-term stress on denitrification performance: Electron behaviors, bacterial and fungal community

Denitrifying system is a feasible way to remove nitro-aromatic compounds (NACs) in wastewater. However, the toxicity and mechanisms of NACs to denitrification remain unknown. This study investigated effects of nitrobenzene (NB, a typical NAC) on denitrification in short term. Results showed that NB in 10-50 mg/L groups decreased NO3--N removal efficiency by 9%-24%, but increased nitrous oxide (N2O) generation by 6-17fold. Mechanistic research indicated that NB could deteriorate electron behaviors and disturbed enzyme activities of microbial metabolism and denitrification, leading to a decline in denitrification performance. Structural equation modeling revealed that N2O reductase activity was the core factor in predicting denitrification performance at exposure of NB, with the indirect effects of NADH and electron transport system activity. High-throughput sequencing analysis demonstrated that NB had made an alteration on both bacterial and fungal community structure, as well as their interactions.

Heterogeneous V2O5/TiO2-Mediated Photocatalytic Reduction of Nitro Compounds to the Corresponding Amines under Visible Light

The hydrogenation of nitro compounds to their corresponding amines is developed using a heterogeneous and recyclable catalyst (V₂O₅/TiO₂) under irradiation of blue LED (9 W) at ambient temperature. Hydrazine hydrate is used as a reductant and ethanol is used as a solvent, facilitating green, sustainable, low-cost production. The synthesis of 32 (hetero)arylamines and their pharmaceutically relevant molecules (five) are described. Significant features of the protocol include catalyst recyclability, green solvent, ambient temperature, and gram-scale reactions. Among the other aspects studied are ¹H-NMR-assisted reaction progress monitoring, control experiments for mechanistic studies, protocol applications, and recyclability studies. Furthermore, the developed protocol enabled wide functional group tolerance, chemo-selectivity, high yield, and low-cost, sustainable, and environmentally benign synthesis.

Electroactive microorganism-assisted remediation of groundwater contamination: Advances and challenges

Groundwater contamination has become increasingly prominent, therefore, the development of efficient remediation technology is crucial for improving groundwater quality. Bioremediation is cost-effective and environmentally friendly, while coexisting pollutant stress can affect microbial processes, and the heterogeneous character of groundwater medium can induce bioavailability limitations and electron donor/acceptor imbalances. Electroactive microorganisms (EAMs) are advantageous in contaminated groundwater because of their unique bidirectional electron transfer mechanism, which allows them to use solid electrodes as electron donors/acceptors. However, the relatively low-conductivity groundwater environment is unfavorable for electron transfer, which becomes a bottleneck problem that limits the remediation efficiency of EAMs. Therefore, this study reviews the recent advances and challenges of EAMs applied in the groundwater environment with complex coexisting ions, heterogeneity, and low conductivity and proposes corresponding future directions.

Nitrobenzene reduction promoted by the integration of carbon nanotubes and Geobacter sulfurreducens

Electron shuttles (ES) can mediate long-distance electron transfer between extracellular respiratory bacteria (ERB) and the surroundings. However, the effects of graphite structure in ES on the extracellular electron transfer (EET) process remain ambiguous. This work investigated the function of graphite structure in the process of nitrobenzene (NB) degradation by Geobacter sulfurreducens PCA, in which highly aromatic carbon nanotubes (CNTs) was studied as a typical ES. The results showed that the addition of 1.5 g L^-1 of CNTs improved the NB biodegradation up to 81.2%, plus 18.8% NB loss due to the adsorption property of CNTs, achieving complete removal of 200 μM NB within 9 h. The amendment of CNTs greatly increased the EET rate, indicating that graphite structure exhibited excellent electron shuttle performance. Furthermore, Raman spectrum proved that CNTs obtained better graphite structure after 90 h of cultivation with strain PCA, resulting in higher electrochemical performance. Also, CNTs was perceived as the "Contaminant Reservoir", which alleviated the toxic effect of NB and shortened the distance of EET process. Overall, this work focused on the effects of material graphite structure on the EET process, which enriched the understanding of the interaction between CNTs and ERB, and these results might promote their application in the in-situ bioremediation of nitroaromatic-polluted environment.

Molybdenum-Mediated Reductive Hydroamination of Vinylcyclopropanes with Nitroarenes: Synthesis of Homoallylamines

A molybdenum-mediated reductive hydroamination of vinylcyclopropanes with nitroarenes has been developed. A broad range of substituted homoallylamines were prepared in good to excellent yields from readily available starting materials. No noble metal catalysts were used in this reaction, and Mo(CO)₆ acted as both catalyst and reductant. This protocol provides an effective method for the selective synthesis of substituted homoallylamines from easily available nitroarenes.

Ammonia/ammonium removal/recovery from wastewaters using bioelectrochemical systems (BES): A review

This review updates the current research efforts on using BES to recover NH₃/NH₄⁺, highlighting the novel configurations and introducing the working principles and the applications of microbial fuel cell (MFC), microbial electrolysis cell (MEC), microbial desalination cell (MDC), and microbial electrosynthesis cell (MESC) for NH₃/NH₄⁺ removal/recovery. However, commonly studied BES processes for NH₃/NH₄⁺ removal/recovery are energy intensive with external aeration needed for NH₃ stripping being the largest energy input. In such a process bipolar membranes used for yielding a local alkaline pool recovering NH₃ is not cost-effective. This gives a chance to microbial electrosynthesis which turned out to be a potential alternative option to approach circular bioeconomy. Furtherly, the reactor volume and NH₃/NH₄⁺ removal/recovery efficiency has a weakly positive correlation, indicating that there might be other factors controlling the reactor performance that are yet to be investigated.

Synergistic effect of bioanode and biocathode on nitrobenzene removal: Microbial community structure and functions

This study aimed to reveal the synergistic effect of bioanode and biocathode on nitrobenzene (NB) removal with different microbial community structures and functions. Single-chamber bioelectrochemical reactors were constructed and operated with different initial concentrations of NB and glucose as the substrate. With the synergistic effect of biocathode and bioanode, NB was completely removed within 8 h at a kinetic rate constant of 0.8256 h^-1, and high conversion rate from NB to AN (92%) was achieved within 18 h. The kinetic rate constant of NB removal was linearly correlated with the maximum current density and total coulombs (R² > 0.95). Increase of glucose and NB concentrations had significantly positive and negative effects, respectively, on the NB removal kinetics (R² > 0.97 and R² > 0.93, respectively). Geobacter sp. and Enterococcus sp. dominated in the bioanode and biocathode, respectively. The presence of Klebsiella pneumoniae in the bioanode was beneficial for Geobacter species to produce electricity and to alleviate the NB inhibition. As one of the dominant species at the biocathode, Methanobacterium formicicum has the ability of nitroaromatics degradation according to KEGG analysis, which played a crucial role for NB reduction. Fermentative bacteria converted glucose into volatile fatty acids or H₂, to provide energy sources to other species (e.g., Geobacter sulfurreducens and Methanobacterium formicicum). The information from this study is useful to optimize the bioelectrocatalytic system for nitroaromatic compound removal.

Palladium-Catalyzed Intramolecular Heck/Aminocarbonylation of Alkene-Tethered Iodobenzenes with Nitro Compounds: Synthesis of Carbamoyl-Substituted Benzoheterocycles

A palladium-catalyzed intramolecular Heck/aminocarbonylation of alkene-tethered iodobenzenes with nitro compounds has been developed for the synthesis of carbamoyl-substituted benzoheterocycles. Using Mo(CO)₆ as a solid CO source, no external reductant or additives were needed in this procedure. Both nitroarenes and nitroalkanes were well tolerated. A range of carbamoyl-substituted dihydrobenzofurans and indolines were prepared in moderate to high yields.

Bio-augmentation with dissimilatory nitrate reduction to ammonium (DNRA) driven sulfide-oxidizing bacteria enhances the durability of nitrate-mediated souring control

Biological souring (producing sulfide) is a global challenge facing anaerobic water bodies, especially the oil reservoir fluids. Nitrate injection has demonstrated great potential in souring control, and dissimilatory nitrate reduction to ammonium (DNRA) bacteria was proposed to play crucial roles in the process. How to durably control souring with nitrate amendment, however, remains undiscovered. Herein, Gordonia sp. TD-4, a DNRA-driven sulfide-oxidizing bacterium, was used to elucidate the effects of bio-augmentation with DNRA bacteria on the durability of nitrate-mediated souring control. The results revealed that nitrate amendment combined with bio-augmentation with TD-4 after souring could effectively control souring and enhance the durability of nitrate-mediated souring control, while nitrate amendment before souring failed to persistently control souring. Nitrate amendment before and after souring resulted in different evolution dynamics of nitrate-reducing bacteria. Denitrifying bacteria were enriched in reactors amended with nitrate before souring or in dissolved sulfide exhausted reactors amended with nitrate after souring. The heterotrophic denitrifying activity of denitrifying bacteria, however, decreased the durability of nitrate-mediated souring control. Comparative and functional genomics analysis identified potential niche adaptation mechanisms (autotrophic and heterotrophic nitrate/nitrite reduction, including DNRA and denitrification) of predominant SRB in nitrate-amended environments, which were responsible for the rapid resumption of sulfide accumulation after the depletion of nitrate and nitrite. Pulsed injection of nitrate combined with bio-augmentation with DNRA-driven sulfide-oxidizing bacteria was proposed as a potential method to enhance the durability of nitrate-mediated souring control. The findings were innovatively applied to simultaneous bio-demulsification and souring control of emulsified and sour produced water from the petroleum industry.

Antimony reduction by a non-conventional sulfate reducer with simultaneous bioenergy production in microbial fuel cells

Environmental toxicity of antimony (Sb) is significantly increased through the widespread industrial application. The extended release of Sb above the regulatory level became a risk to humans habituated in the ecosystem. Conventional methods to remediate Sb demand high energy or resource input, which further leads to secondary pollution. The bio-electrochemical system offers a promising bioremediation strategy to remove or reduce toxic heavy metals. Thus, this research explores the possibilities of simultaneous metal sulfide (MeS) precipitation and electricity production using a full biological Microbial fuel cell (MFC). A non-conventional sulfate-reducing bacteria (SRB) Citrobacter freundii SR10 was used for this investigation, where the MFC was operated for lactate utilization in the bio-anode and Sb reduction at the bio-cathode. This study observed 81% of coulombic efficiency (bio-anode) and 97% of sulfate reduction with 99.3% Sb (V) reduction (bio-cathode), and it was concluded that the MeS precipitation entirely depends on sulfide concentration via SR10 sulfate reduction. The MFC-SR10 offers a maximum power density of 1652.9 ± 32.1 mW/m^3, and their performance was depicted using cyclic voltammetry and electrochemical impedance spectroscopy. The Sb reduction was evaluated through fluorescence spectroscopy, and the Sb (V) MeS precipitation was confirmed as stibnite (Sb₂S₃) by Raman spectroscopy and X-ray photoelectron spectroscopy. Furthermore, the matured anodic and cathodic biofilm formation was confirmed by Scanning electron microscopy with Energy-dispersive X-ray spectroscopy. Thus the MFC with SRB bio-cathode can be used as an alternative to simultaneously remove sulfate and Sb from the wastewater with electricity production.

Electrical selection for planktonic sludge microbial community function and assembly

Electrostimulated hydrolysis acidification (eHA) has been used as an efficient biological pre-treatment of refractory industrial wastewater. However, the effects of electrostimulation on the function and assembly of planktonic anaerobic sludge microbial communities are poorly understood. Using 16S rRNA gene and metagenomic sequencing, we investigated planktonic sludge microbial community structure, composition, function, assembly, and microbial interactions in response to electrostimulation. Compared with a conventional hydrolysis acidification (HA) reactor, the planktonic sludge microbial communities selected by electrostimulation promoted biotransformation of the azo dye Alizarin Yellow R. The taxonomic and functional structure and composition were significantly shifted upon electrostimulation with azo dyes degraders (e.g. Acinetobacter and Dechloromonas) and electroactive bacteria (e.g. Pseudomonas) being enriched. More microbial interactions between fermenters and decolorizing and electroactive bacteria, as well as fewer interactions between different fermenters evolved in the eHA microbial communities. Moreover, the decolorizing bacteria were linked to the higher abundance of genes encoding for azo- and nitro-reductases and redox mediator (e.g. ubiquinone) biosynthesis involved in the transformation of azo dye. Microbial community assembly was more driven by deterministic processes upon electrostimulation. This study offers new insights into the effects of electrostimulation on planktonic sludge microbial community function and assembly, and provides a promising strategy for the manipulation of anaerobic sludge microbiomes in HA engineering systems.

Role of bioelectrochemical systems for the remediation of emerging contaminants from wastewater: A review

Bioelectrochemical systems (BESs) are a unique group of wastewater remediating technology that possesses the added advantage of valuable recovery with concomitant wastewater treatment. Moreover, due to the application of robust microbial biocatalysts in BESs, effective removal of emerging contaminants (ECs) can be accomplished in these BESs. Thus, this review emphasizes the recent demonstrations pertaining to the removal of complex organic pollutants of emerging concern present in wastewater through BES. Owing to the recalcitrant nature of these pollutants, they are not effectively removed through conventional wastewater treatment systems and thereby are discharged into the environment without proper treatment. Application of BES in terms of ECs removal and degradation mechanism along with valuables that can be recovered are discussed. Moreover, the factors affecting the performance of BES, like biocatalyst, substrate, salinity, and applied potential are also summarized. In addition, the present review also elucidates the occurrence and toxic nature of ECs as well as future recommendations pertaining to the commercialization of this BES technology for the removal of ECs from wastewater. Therefore, the present review intends to aid the researchers in developing more efficient BESs for the removal of ECs from wastewater.

Hydrogen production in single-chamber microbial electrolysis cell under high applied voltages

The aim of this study was to investigate the performance of single-chamber MEC under applied voltages higher than that for water electrolysis. With different acetate concentrations (1.0-2.0 g/L), the MEC was tested under applied voltages from 0.8 to 2.2 V within 2600 h (54 cycles). Results showed that the MEC was stably operated for the first time within 20 cycles under 2.0 and 2.2 V, compared with the control MEC with significant water electrolysis. The maximum current density reached 27.8 ± 1.4 A/m² under 2.0 V, which was about three times as that under 0.8 V. The anode potential in the MEC could be kept at 0.832 ± 0.110 V (vs. Ag/AgCl) under 2.2 V, thus without water electrolysis in the MEC. High applied voltage of 1.6 V combined with alkaline solution (pH = 11.2) could result in high hydrogen production and high current density. The maximum current density of MEC at 1.6 V and pH = 11.2 reached 42.0 ± 10.0 A/m², which was 1.85 times as that at 1.6 V and pH = 7.0. The average hydrogen content reached 97.2% of the total biogas throughout all the cycles, indicating that the methanogenesis was successfully inhibited in the MEC at 1.6 V and pH = 11.2. With high hydrogen production rate and current density, the size and investment of MEC could be significantly reduced under high applied voltages. Our results should be useful for extending the range of applied voltages in the MEC.

NaI/PPh3-Mediated Photochemical Reduction and Amination of Nitroarenes

A mild transition-metal- and photosensitizer-free photoredox system based on the combination of NaI and PPh₃ was found to enable highly selective reduction of nitroarenes. This protocol tolerates a broad range of reducible functional groups such as halogen (Cl, Br, and even I), aldehyde, ketone, carboxyl, and cyano. Moreover, the photoredox catalysis with NaI and stoichiometric PPh₃ provides also an alternative entry to Cadogan-type reductive amination when o-nitrobiarenes were used.

Damage of anodic biofilms by high salinity deteriorates PAHs degradation in single-chamber microbial electrolysis cell reactor

The anaerobic biodegradation of polycyclic aromatic hydrocarbons (PAHs) in high salinity wastewater is rather hard due to the inhibition of microorganisms by complex and high dosage of salts. Microbial electrolysis cell (MEC), with its excellent characteristic of anodic biofilms, can be an effective way to enhance the PAHs biodegradation. This work evaluated the impact of NaCl concentrations (0 g/L, 10 g/L, 30 g/L, and 60 g/L) on naphthalene biodegradation and analyzed the damage protection mechanism of anodic biofilms in batching MECs. Compared with the open circuit, the degradation efficiency of naphthalene under the closed circuit with 10 g/L NaCl concentration reached the maximum of 95.17% within 5 days. Even when NaCl concentration reached 60 g/L, the degradation efficiency only decreased by 10.02%, compared with the MEC without additional NaCl. Confocal scanning laser microscope (CSLM) proved the superiority of the biofilm states of MEC anode under high salinity in terms of thicker biofilms and higher proportion of live/dead bacteria cells. The highest dehydrogenase activity (DHA) was found in the MEC with 10 g/L NaCl concentration. Moreover, microbial diversity analysis demonstrated the classical electroactive microorganisms Geobacter and Pseudomonas were found on the anodic biofilms of MECs, which have both PAHs degradability and the electrochemical activity. Therefore, this study proved that high salinity had adverse effects on the anodic biofilms, but MEC alleviated the damage caused by high salinity.

Efficient reduction of antimony by sulfate-reducer enriched bio-cathode with hydrogen production in a microbial electrolysis cell

Bio-cathode Microbial electrolysis cell (MEC) is a promising and eco-friendly technology for concurrent hydrogen production and heavy metal reduction. However, the bioreduction of Antimony (Sb) in a bio-electrochemical system with H₂ production is not explored. In this study, two efficient sulfate-reducing bacterial (SRB) strains were used to investigate the enhanced bioreduction of sulfate and Sb with H₂ production in the MEC. SRB Bio-cathode MEC was developed from the microbial fuel cell (MFC) and operated with an applied voltage of 0.8 V. The performance of the SRB bio-cathode was confirmed by cyclic voltammetry, linear sweep voltammetry and electrochemical impedance spectroscopy. SRB strains of BY7 and SR10 supported the synergy reduction of sulfate and Sb by sulfide metal precipitation reaction. Hydrogen gas was the main product of SRB bio-cathode, with 86.9%, and 83.6% of H₂ is produced by SR10 and BY7, respectively. Sb removal efficiency reached up to 88.2% in BY7 and 96.3% in SR10 with a sulfate reduction rate of 92.3 ± 2.6 and 98.4 ± 1.6 gm^-3d^-1 in BY7 and SR10, respectively. The conversion efficiency of Sb (V) to Sb (III) reached up to 70.1% in BY7 and 89.2% in SR10. It was concluded that the total removal efficiency of Sb relies on the amount of sulfide concentration produced by the sulfate reduction reaction. The hydrogen production rate was increased up to 1.25 ± 0.06 (BY7) and 1.36 ± 0.02 m³ H₂/(m³·d) (SR10) before addition of Sb and produced up to 0.893 ± 0.03 and 0.981 ± 0.02 m³H₂/(m³·d) after addition of Sb. The precipitates were characterized by X-ray diffraction and X-ray photoelectron spectroscopy, which confirmed Sb (V) was reduced to Sb₂S₃.

Recent advances in soil microbial fuel cells for soil contaminants remediation

The cost-effective and eco-friendly approaches are needed for decontamination of polluted soils. The bio-electrochemical system, especially microbial fuel cells (MFCs) offer great promise as a technology for remediation of soil, sediment, sludge and wastewater. Recently, soil MFCs (SMFCs) have been attracting increasing amounts of interest in environmental remediation, since they are capable of providing a clean and inexhaustible source of electron donors or acceptors and can be easily controlled by adjusting the electrochemical parameters. In this review, we comprehensively covered the principle of SMFCs including the mechanisms of electron releasing and electron transportation, summarized the applications for soil contaminants remediation by SMFCs with highlights on organic contaminants degradation and heavy metal ions removal. In addition, the main factors that affected the performance of SMFCs were discussed in details which would be helpful for performance optimization of SMFCs as well as the efficiency improvement for soil remediation. Moreover, the key issues need to be addressed and future perspectives are presented.

A review on self-sustainable microbial electrolysis cells for electro-biohydrogen production via coupling with carbon-neutral renewable energy technologies

Microbial electrolysis cell (MEC) technology is a promising bioelectrochemical hydrogen production technology that utilizes anodic bio-catalytic oxidation and cathodic reduction processes. MECs require a lower external energy input than water electrolysis; however, as they also require the application of external power sources, this inevitably renders MEC systems a less sustainable option. This issue is the main obstacle hindering the practical application of MECs. Therefore, this review aims to introduce a self-sustainable MEC technology by combining conventional MECs with advanced carbon-neutral technologies, such as solar-, microbial-, osmotic-, and thermoelectric-powers (and their combinations). Moreover, new approaches to overcome the thermodynamic barriers and attain self-sustaining MECs are discussed in detail, thereby providing a working principle, current challenges, and future perspective in the field. This review provides comprehensive insights into reliable hydrogen production as well as the latest trends towards self-sustainable MECs for practical application.

Enhanced electron transfer on microbial electrosynthesis biocathode by polypyrrole-coated acetogens

Extracellular electron transfer (EET) is a significant pathway to transport electrons between bacteria and electrode in microbial electrosynthesis systems (MESs). To enhance EET in the MES, a high-conductivity polymer, polypyrrole (PPy), was coated on the surface of mixed culture acetogens in situ and the PPy-coated bacteria were inoculated on the cathode of MES. The charge transfer resistance of PPy-coated biocathode was 33%-70% of that with PPy-uncoated. Acetate production rate and Faradic efficiency in PPy-coated biocathodes increased by 3 to 6 times. After 960 h operation, Acetobacterium, Desulfovibrio, and Acinetobacter dominate the community on the coated and uncoated biocathode. Quinone loop and NADH dehydrogenase to ubiquinone were involved in electron transfer pathway of biocathode and stimulated by PPy coating. Low-level expression of C-type cytochromes on biocathode indicated its less important role in inward EET. The study provided useful information for applications of high-conductivity chemicals in microbial electrosynthesis.

Rapid aerobic visible-light-driven photo-reduction of nitrobenzene

Many strategies have been proposed to treat wastewater containing toxic contaminants, such as nitrobenzene, prior to discharge. Most of these degradation processes, especially biodegradation, undergo a limited step of nitrobenzene reduction into aniline and a subsequent fast step of aniline mineralization. The low efficiency of nitrobenzene reduction and the requirement of an anaerobic atmosphere limit the overall degradation performance. In this communication, eosin Y is reported as a potential homogeneous catalyst for the rapid photoreduction of nitrobenzene under aerobic conditions. As a result, a conversion (~10 min) of nitrobenzene (25 mg/L) into aniline driven by visible light was achieved. The reduction rate constants under aerobic conditions (0.30 min^-1) were even slightly higher than those under anaerobic conditions (0.28 min^-1), and the lifetime of the catalytic system was extended. Furthermore, the mechanism of nitrobenzene transformation was speculated based on the identification of intermediate products. To provide guidance for the practical application of this pretreatment strategy, the impact of pH value and widely existing heavy metal ions on photoreduction were also demonstrated. The results from this work provide a novel insight into the integrated control of organic pollutants produced in chemical industries.

Enhanced nitrobenzene reduction by modified biochar supported sulfidated nano zerovalent iron: Comparison of surface modification methods

In our previous study, biochar (BC) supported sulfidated nano zerovalent iron (S-nZVI@BC) was prepared for nitrobenzene (NB) reduction. In this study, in order to further improve the reduction performance of S-nZVI@BC, BC was modified before the loading of S-nZVI through three methods: oxidant (H₂O₂) pretreatment, alkali (NaOH) pretreatment and acid (HCl) pretreatment. The results indicated that S-nZVI could be evenly distributed onto HCl-BC due to increased surface area, negative surface charge and increased acidic functional groups on HCl-BC. At an initial concentration of 200 mg L^-1, NB could be completely removed by S-nZVI@HCl-BC within a reaction time as short as 60 min, indicating rather excellent performance of S-nZVI@HCl-BC. NB reduction performance followed the order: S-nZVI@HCl-BC > S-nZVI@NaOH-BC > S-nZVI@BC > S-nZVI@H₂O₂-BC. The mass ratio of S-nZVI and HCl-BC was optimized in terms of NB removal efficiency, with 3:1 being identified as the best mass ratio. Furthermore, the mechanism involved in the enhanced NB reduction by S-nZVI@HCl-BC was proposed. This study demonstrated that S-nZVI@HCl-BC is a promising alternative for efficient NB removal from wastewater.