Porous biochar modified with polyethyleneimine (PEI) for effective enrichment of U(VI) in aqueous solution

In Situ, Nitrogen-Doped Porous Carbon Derived from Mixed Biomass as Ultra-High-Performance Supercapacitor

How to address the destruction of the porous structure caused by elemental doping in biochar derived from biomass is still challenging. In this work, the in-situ nitrogen-doped porous carbons (ABPCs) were synthesized for supercapacitor electrode applications through pre-carbonization and activation processes using nitrogen-rich pigskin and broccoli. Detailed characterization of ABPCs revealed that the best simple ABPC-4 exhibited a super high specific surface area (3030.2-3147.0 m2 g-1) and plentiful nitrogen (1.35-2.38 wt%) and oxygen content (10.08-15.35 wt%), which provided more active sites and improved the conductivity and electrochemical activity of the material. Remarkably, ABPC-4 showed an outstanding specific capacitance of 473.03 F g-1 at 1 A g-1. After 10,000 cycles, its capacitance retention decreased by only 4.92% at a current density of 10 A g-1 in 6 M KOH. The assembled symmetric supercapacitor ABPC-4//ABPC-4 achieved a power density of 161.85 W kg-1 at the maximum energy density of 17.51 Wh kg-1 and maintained an energy density of 6.71 Wh kg-1 when the power density increased to 3221.13 W kg-1. This study provides a mixed doping approach to achieve multi-element doping, offering a promising way to apply supercapacitors using mixed biomass.

Microbial etch: A novel construction method of functionalized biochar for enhanced uranium extraction in radioactive wastewater

Nuclear energy is playing an increasingly important role on the earth, but the nuclear plants leaves a legacy of radioactive waste pollution, especially uranium-containing pollution. Straw biochar with wide sources, large output, low cost, and easy availability, has emerged as a promising material for uranium extraction from radioactive wastewater, but the natural biomass with suboptimal structure and low content of functional groups limits the efficiency. In this work, microbial etch was first came up to regulate the biochar's structure and function. The surface of the biochar becomes rougher and more microporous, and the mineral contents (Ca, P) indirectly increased by microbial etch. The biochar was modified by calcium phosphate and exhibited a remarkable uranium extraction capacity of 590.8 mg g-1 (fitted value). This work provides a cost-effective and sustainable method for preparing functionalized biochar via microbial etch, which has potential for application to uranium extraction from radioactive wastewater.

Antimicrobial polymer-based zeolite imidazolate framework composite membranes for uranium extraction from wastewater and seawater

Extraction uranium (VI) (U(VI)) from wastewater and seawater is highly important for environmental protection and life safety, but it remains a great challenge. In this work, the growth of the zeolitic imidazolate framework-8 (ZIF-8) nanoparticles on the tannic acid (TA)-3-aminopropyltriethoxysilane (APTES) modified PVDF (TAP) membrane was designed to obtain an excellent U(VI) adsorbent. The zeolite imidazolate framework composite membrane (TAPP-ZIF-60) was prepared through polyethyleneimine (PEI) bridging strategy and temperature regulation strategy in solvothermal method. The coordination bond between PEI and ZIF-8 and the covalent bond between PEI and TAP are essential in forming stable composite membrane. TAPP-ZIF with different properties was synthesized through a temperature regulation process and the TAPP-ZIF prepared at 60 °C has the uniform morphology and good performance. The adsorption capacity of TAPP-ZIF-60 is 153.68 mg/g (C0 = 95.01 mg/L and pH = 8.0) and water permeability is 5459 L m-2 h-1 bar-1. After ten adsorption-desorption cycles, it is proved that TAPP-ZIF-60 has good repeatability and stability. In addition, the TAPP-ZIF-60 composites membrane has a good inhibitory effect on Staphylococcus aureus and Escherichia coli. X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) analysis reveal that the coordination between TAPP-ZIF-60 and uranyl ions is the primary factor contributing to the high adsorption capacity.

The efficient uptake of uranium by amine-functionalized β-cyclodextrin supported fly ash composite from polluted water

A novel polyethyleneimine/polydopamine-functionalized β-cyclodextrin supported fly ash adsorbent (PEI/PDA/β-CD/FA) had been synthesized to uptake uranium from polluted water. At pH = 5.0 and T = 298 K, the uranium uptake efficiency and capacity of PEI/PDA/β-CD/FA reached to 98.7 % and 622.8 mg/g, respectively, which were much higher than those of FA (71.4 % and 206.7 mg/g).The excellent uranium uptake properties of PEI/PDA/β-CD/FA could be explained by three points: (1) using β-CD as a supporting material could effectively avoid the aggregation of FA and improve the hydrophily of FA; (2) the unique cavity structure of β-CD could form chelates with uranyl ions; (3) the formation of PEI/PDA co-deposition coating on FA further enhanced the affinity of FA to UO22+. With the presence of interfering ions, the uptake efficiency of PEI/PDA/β-CD/FA for uranium was still up to 94.5 % after five cycles, indicating the high selectively and recoverability of PEI/PDA/β-CD/FA. In terms of the results of characterizations, uranium was captured by PEI/PDA/β-CD/FA via electrostatic attraction, hydrogen bond, coordination and complexation. To sum up, PEI/PDA/β-CD/FA was expected to be used for actual sewage treatment owing to its excellent uranium uptake efficiency/capacity, selectivity, cycle stability and feasibility of actual application.

Oxygen Self-Supplied Nanoplatform for Enhanced Photodynamic Therapy against Enterococcus Faecalis within Root Canals

The successful treatment of persistent and recurrent endodontic infections hinges upon the eradication of residual microorganisms within the root canal system, which urgently needs novel drugs to deliver potent yet gentle antimicrobial effects. Antibacterial photodynamic therapy (aPDT) is a promising tool for root canal infection management. Nevertheless, the hypoxic microenvironment within the root canal system significantly limits the efficacy of this treatment. Herein, a nanohybrid drug, Ce6/CaO2/ZIF-8@polyethylenimine (PEI), is developed using a bottom-up strategy to self-supply oxygen for enhanced aPDT. PEI provides a positively charged surface, which enables precise targeting of bacteria. CaO2 reacts with H2O to generate O2, which alleviates the hypoxia in the root canal and serves as a substrate for Ce6 under 660 nm laser irradiation, leading to the successful eradication of planktonic Enterococcus faecalis (E. faecalis) and biofilm in vitro and, moreover, the effective elimination of mature E. faecalis biofilm in situ within the root canal system. This smart design offers a viable alternative for mitigating hypoxia within the root canal system to overcome the restricted efficacy of photosensitizers, providing an exciting prospect for the clinical management of persistent endodontic infection.

Boosting Water Retention in Agriculture: Vine Biochar-Doped Hydrogels' Swelling and Germination Effects

Water scarcity presents a formidable challenge to agriculture, particularly in arid, semiarid, and rainfed settings. In agricultural contexts, hydrogels serve as granular agents for water retention, undergoing considerable expansion upon water exposure. They assume versatile roles encompassing soil-water retention, the dispensation of nutrients and pesticides, seed encapsulation, erosion mitigation, and even food supplementation. This study's objective involves the examination of biochar-infused hydrogels, fashioned by incorporating vine pruning waste-derived biochars, and the assessment of swelling behaviors in various aqueous environments encompassing deionized, tap, and saline water at concentrations of 0.5-1%. Characterizations of the vine-biochars-VB and biochar-incorporated hydrogels-VBHG are executed, with particular attention to their swelling properties across diverse media. As an initial step toward appraising their agricultural relevance, these hydrogels are introduced to a germination medium featuring wheat seeds to discern potential influences on germination dynamics. The maximum swelling capacity of VBHG is recorded in deionized water, tap water at pH 7.0, tap water at pH 9.0, saline water at 0.5%, and saline water at 1%, reaching 352%, 207%, 230%, 522%, and 549%, respectively. Remarkably, the 0.5% VBHG treatment exhibits the most pronounced root elongation. The application of hydrogels in agriculture exhibits promise, particularly within drought-related contexts and potential soilless applications.

New insights into the effect of pyrolysis temperature on the spectroscopy properties of dissolved organic matter in manure-based biochar

Dissolved organic matter (DOM) derived from biochar takes a crucial role in transport and bioavailability toward contaminants; hence, it is undeniable that a thorough analysis of its properties is important. So far, the effect of pyrolysis temperature on the functional groups, components, and evolutionary sequence of manure-based biochar DOM has not been adequately investigated. Here, DOM was released from two typical livestock manures (cow and pig) at five pyrolysis temperatures (300 ~ 700°C), and it was explored in depth with the aid of moving window 2D correlation spectroscopy (MW-2D-COS) and heterogeneous 2D correlation spectroscopy (hetero-2D-COS). The results demonstrated that the concentration, aromaticity, and hydrophobicity of DOM were greater at high temperatures, and more DOM was liberated from cow manure-based biochar at identical temperature. Protein-like compounds dominated at high temperatures. The pyrolysis temperatures of final configuration transformation points of the fulvic acid-like component and the aromatic ring C=C in DOM were 400°C and 500°C, respectively. Moreover, Fourier transform infrared spectroscopy combined with two-dimensional correlation analysis indicated that the functional group evolution of DOM depends on the pyrolysis temperature and feedstock type. The study provides a new perspective on manure management and environmental applications of biochar.

Waste for Waste: Interface-Intensified Durable Superhydrophilic-Superoleophobic Collagen Fiber Membrane for Efficient Separation of Cationic Surfactant-Stabilized Oil-in-Water Emulsions

Cationic surfactant-stabilized oil-in-water emulsions pose a significant challenge in separation due to the presence of surfactants. Herein, we develop a collagen-fiber-based CFM-PMDA-TiO2 membrane with unique infiltration properties capable of efficiently separating cationic surfactant-stabilized oil-in-water emulsions by exploiting the charge-demulsification effect. The membrane exhibits superhydrophilic and submerged superoleophobic properties, making it highly suitable for separating a wide range of commercially available cationic surfactant-stabilized oil-in-water microemulsions and nanoemulsions, which demonstrates an exceptional separation efficiency as high as 99.86% and an impressive flux of up to 1436.40 L m-2 h-1. Furthermore, even after a strong subjecting of the membrane to sandpaper abrasion and a full 15 time use, the separation efficacy of oil-in-water emulsions is retained, highlighting the durability, reusability, and economic viability. We propose that these features are enabled by the electrostatic interactions triggered from pyromellitic dianhydride (PMDA) and superhydrophilic-superoleophobic membrane intensified by the TiO2 on the unique collagen fiber membrane. Outcomes emphasize the versatility and potential of our membrane in addressing emulsified oily wastewater hurdles.

The modified biochar from wheat straw by the combined composites of MnFe2O4 nanoparticles and chitosan Schiff base for enhanced removal of U(VI) ions from aqueous solutions

In the last few decades, U(VI) is a significant environmental threat. The innovative and environmentally friendly adsorbent materials for U(VI) removal were urgent. Preparation of the modified biochar from wheat straw by combined composites of MnFe2O4 nanoparticles and chitosan Schiff base (MnFe2O4@CsSB/BC) was characterized, and adsorption experiments were carried out to investigate the performance and interfacial mechanism of U(VI) removal. The results showed that MnFe2O4@CsSB/BC exhibited high adsorption capacity of U(VI) compared with BC. The adsorption process of U(VI) removal by MnFe2O4@CsSB/BC could be ascribed as pseudo-second-order model and Langmuir model. The maximum adsorption capacity of U(VI) removal by MnFe2O4@CsSB/BC reached 19.57 mg/g at pH4.0, 30 mg/L of U(VI), and 25 °C. The possible mechanism was a chemical adsorption process, and it mainly contained electrostatic attraction and surface complexation. Additionally, it also was an economic and environmental friendly adsorbent.

Effect mechanism of iron conversion on adsorption performance of hydrochar derived from coking sludge

In this study, Fe conversion during hydrothermal carbonization (HTC) of coking sludge were investigated, and the effect mechanism of Fe component on the adsorption performance of coking sludge hydrochar (CHC) was explored. The results showed that after HTC treatment, more than 95 % of Fe remained in the CHC. Fe3+ was reduced to Fe2+ by sugar and amino acids. Fe was stabilized during the HTC process and was still predominantly in the Fe manganese oxidation state. The CHC prepared at 270 °C exhibited excellent adsorption capacities for Congo red (CR), tetracycline (TC), and Cr (VI). Their maximum adsorption capacities were 140.85, 147.06, and 19.92 mg/g, respectively. Quantitative adsorption mechanism experiments, XRD and VSM characterization revealed that Fe component played a significant role in adsorption, and CHC with more Fe3O4 exhibited better adsorption capacity. The results of the XPS characterization of CHC before and after adsorption showed that Fe3O4 provided rich Fe adsorption sites on the surface of CHC to strengthen the adsorption efficiency of pollutants through Fe3+/Fe2+ reduction and complexation of Fe-O/N. In addition, the formed Fe3O4 also imparted CHC with magnetic properties (Ms = 4.12 emu/g) to facilitate the subsequent separation and recovery. These results demonstrated that the prepared CHC has great potential for treating actual wastewater containing CR and TC.

A novel biochar composite derived from oil-based drill sludge and cuttings: Structural characterization and electrochemical properties

How to dispose of large quantities of hazardous shale gas drilling waste is an important worldwide problem facing the oil and gas industry. In this study, we report an environmentally friendly and low energy consumption approach (carbonization followed by activation) to convert oil-based drill sludge (OBDS) and oil-based drill cuttings (OBDCs) into biochar composites and investigate the effect of hydrofluoric acid (HF) acidification on them. The biochar composites were prepared using the OBDS, OBDCs, the mixtures of OBDS and OBDCs, and HF treatment the mixtures were named OS, OC, OSC, and OSC-HF, respectively. The characterization result of synthesized biochar composites indicated that the OSC had a larger specific surface area and a higher degree of graphitization. The composites mainly consisted of SiO2 and BaSO4, except for biochar. The OSC electrode exhibited the highest oxygen evolution potential (1.72 V vs Ag/AgCl) and the lowest charge transfer resistance compared with OS, OC, and OSC-HF electrodes, implying that SiO2 plays an important role in electrochemical performance. Using the OSC electrode as an anode, the chemical oxygen demand removal efficiency of the OBDS supernatant was 79.4 ± 0.95%. Further, the OSC electrode could maintain higher degradation efficiency and stability after the fifth reuse. The study provides a promising route for the proper disposal and resource utilization of OBDS and OBDCs and proposes a novel biochar compound as an electrode for the efficient treatment of wastewater. Moreover, this work highlights the important significance of the simultaneous resource utilization of waste and the treatment of wastewater using waste materials.

Activation of peroxymonosulfate with biochar-supported CuO (CuO@BC) for natural organic matter removal and membrane fouling control

To achieve excellent activation efficiency of peroxymonosulfate (PMS), this work prepared a biochar-supported CuO (CuO@BC) catalyst, and the CuO@BC/PMS system was proposed to remove the organic matter in natural surface water and reduce the fouling of ultrafiltration membrane. The successful synthesis of CuO@BC was demonstrated through characterization of its microscopic morphology and chemical composition by various techniques. The prepared heterogeneous catalyst showed a strong catalytic effect on PMS, which significantly removed natural organic matter through the production of active substances (•OH, SO4•-, O2•- and 1O2) from water. With respective degradation rates of 39.4% and 59.4%, the concentrations of DOC and UV254 dropped to 1.702 mg/L and 0.026 cm-1, respectively. Additionally, the CuO@BC/PMS oxidation displayed potent oxidation capabilities for contaminants and fluorescent organics with various molecular weights. The system effectively decreased the amount of organic matter that caused reversible and irreversible fouling of polyethersulfone membranes in natural water by 85.8% and 56.3%, respectively. The main fouling mechanisms changed as well, with standard and complete blocking dominating the entire filtration process. The results demonstrated the capacity of the CuO@BC/PMS system to remove contaminants in natural water and mitigate membrane fouling.

An effective uranium removal using diversified synthesized cross-linked chitosan bis-aldehyde Schiff base derivatives from aqueous solutions

Three new cross-linked chitosan derivatives were yielded through intensification of chitosan with diverse types of bis-aldehydes. The prepared cross-linked chitosan was characterized by FTIR, 1H NMR, XRD, and TGA techniques. TGA indicated an improvement in thermal stability of the cross-linked chitosan compared with pure chitosan. Batch adsorption experiments showed that the three novel cross-linked chitosan bis-aldehyde derivatives possessed good adsorption capacity against U(VI) in the order of BFPA > BFB > BODB (adsorption capacity of the three adsorbents for U(VI) reaches 142, 124, and 114 mg/g respectively) and the adsorption isotherm and kinetic were well described by the Langmuir and the pseudo-second-order kinetic model, respectively. In addition, the prepared cross-linked chitosan bis-aldehyde derivatives were examined as U(VI) catcher from waste solutions.

Comparing the separation performance of poly(ethyleneimine) embedded butyric and octanoic acid based chromatographic stationary phases

Poly(ethyleneimine) (PEI) modified silica spheres were used to graft butyric acid and octanoic acid onto their surfaces, forming two stationary phases named Sil-PEI-BAD and Sil-PEI-CAD, respectively. Characterized methods including fourier transform infrared spectroscopy (FT-IR), elemental analysis (EA) and thermogravimetric analysis (TGA) were utilized to determine the successful synthesis of these two stationary phase materials. The chromatographic performance of these two stationary phases was analyzed with hydrophobic and hydrophilic compounds as analytes. Compared with Sil-PEI-CAD column, Sil-PEI-BAD column was more effective in separating hydrophilic compounds including nucleosides, alkaloids and vitamins. Hydrophobic substances including polycyclic aromatic hydrocarbons (PAHs) and alkylbenzenes obtained excellent separation results on Sil-PEI-CAD column than Sil-PEI-BAD column. Additionally, according to the separation of phenols, Sil-PEI-CAD column can be used in HILIC/RPLC mixed-mode. The results showed that the properties and retention mechanisms of the prepared stationary phases depended on the length of the alkyl chains bonded on the silica surface.

MXene@Au based electrochemical biosensor with pretreatment by magnetic nanoparticles for determination of MRSA from clinical samples

Pathogenic bacteria are associated with high morbidity rates and present significant diagnostic challenges in terms of rapid detection. This study introduces a magnetic separation-based electrochemical biosensor for the detection of Methicillin-resistant Staphylococcus aureus (MRSA). Vancomycin (Van) was used to modify on the surface of polyethyleneimine (PEI) mediated MBs (MBs-PEI-Van) for separation and enrichment of MRSA. The MBs-PEI-Van shown a satisfactory stability and applicability with capture effective (CE) > 85% in both PBS and cerebrospinal fluid (CSF) samples. MXene@Au with controllable size of AuNPs was synthesized by a self-reduction method and employed to modify the glassy carbon electrode (GCE). Immunoglobulin G (IgG) was loaded onto the modified electrode to immobilize MRSA, and ferroceneboronic acid (Fc-BA) was used as a probe for quantitative determination. The differential pulse voltammetry (DPV) current was plotted against the concentration of MRSA from 3.8 × 101 to 3.8 × 107 CFU/mL with a limit of detection (LOD) of 3.8 × 101 CFU/mL. In addition, MRSA was successfully detected in spiked CSF samples with satisfactory recoveries (94.35-107.81 %) and validation results (RSD < 11 %). Overall, this study presents a promising method for the detection of MRSA, with the potential to be further developed into a universal pathogen detection method.

Tailoring B, N-Enriched Carbon Nanosheets via a Gelation-Assisted Strategy for High-Capacity and Fast-Response Capacitive Desalination

Designing high-performance carbonous electrodes for capacitive deionization with remarkable salt adsorption capacity (SAC) and outstanding salt adsorption rate (SAR) is quite significant yet challenging for brackish water desalination. Herein, a unique gelation-assisted strategy is proposed to tailor two-dimensional B and N-enriched carbon nanosheets (BNCTs) for efficient desalination. During the synthesis process, boric acid and polyvinyl alcohol were cross-linked to form a gelation template for the carbon precursor (polyethyleneimine), which endows BNCTs with ultrathin thickness (∼2 nm) and ultrahigh heteroatoms doping level (14.5 atom % of B and 14.8 atom % of N) after freeze-drying and pyrolysis. The laminar B, N-doped carbon enables an excellent SAC of 42.5 mg g-1 and fast SAR of 4.25 mg g-1 min-1 in 500 mg L-1 NaCl solution, both of which are four times as much as those of activated carbon. Moreover, the density functional theory (DFT) calculation demonstrates that the dual doping of B and N atoms firmly enhances the adsorption capacity of Na+, leading to a prominent chemical SAC for brackish water. This work paves a new way to rationally integrate both conducive surface morphology and systematic effects of B, N doping to construct high-efficiency carbonaceous electrodes for desalination.

Efficient removal of uranium (VI) from water by a hyper-cross-linked polymer adsorbent modified with polyethylenimine via phosphoramidate linkers

Practical adsorbents with high efficiency are essential to effectively treating wastewater. Herein, a novel porous uranium adsorbent (PA-HCP) having a considerable amount of amine and phosphoryl groups was designed and synthesized by grafting polyethyleneimine (PEI) on a hyper-cross-linked fluorene-9-bisphenol skeleton via phosphoramidate linkers. Furthermore, it was used to treat uranium contamination in the environment. PA-HCP exhibited a large specific surface area (up to 124 m2/g) and a pore diameter of 2.5 nm. Batch uranium adsorptions on PA-HCP were investigated methodically. PA-HCP demonstrated a uranium sorption capacity of >300 mg/g in the pH range of 4-10 (C0 = 60 mg/L, T = 298.15 K), with its maximum capacity reaching 573.51 mg/g at pH = 7. The uranium sorption process obeyed the pseudo-second-order model and fitted well with the Langmuir isothermal. In the thermodynamic experiments, uranium sorption on PA-HCP was revealed to be an endothermic, spontaneous process. Even in the presence of competing metal ions, PA-HCP exhibited excellent sorption selectivity for uranium. Additionally, excellent recyclability can be achieved after six cycles. Based on FT-IR and XPS measurements, both the PO and -NH2 (and/or -NH-) groups on PA-HCP contributed to efficient uranium adsorption as a result of the strong coordination between these groups and uranium. Furthermore, the high hydrophilicity of the grafted PEI improved the dispersion of the adsorbents in water and facilitated uranium sorption. These findings suggest that PA-HCP can be used as an efficient and economical sorbent to remove U(VI) from wastewater.

Enhanced elimination of Cr(VI) from aqueous media by polyethyleneimine modified corn straw biochar supported sulfide nanoscale zero valent iron: Performance and mechanism

A novel polyethyleneimine modified corn straw biochar supported sulfide nanoscale zero-valent iron (S-nZVI@PBC) was developed to enhance Cr(VI) removal from aqueous media. The characteristics of morphology, chemical composition, and functional groups of S-nZVI@PBC, as well as its kinetics and mechanism for Cr(VI) removal were explored. Characterization verified S-nZVI was successfully loaded onto PEI modified biochar. The adsorption process was well represented pseudo-second-order model (R² = 0.990) and Langmuir isotherm model (R² = 0.962), indicating it was a monolayer chemical adsorption process. The Cr(VI) removal was affected by pH and achieved the maximum when pH = 3.0, which may be ascribed to the better corrosion of nZVI and release of Fe(II) from the S-nZVI@PBC in acidic condition. The primary mechanisms were adsorption, reduction, and co-precipitation. S-nZVI@PBC exhibited higher stability and reusability than nZVI, which makes it more promising in environmental application. Overall, S-nZVI@PBC is of great potential for treating Cr(VI)-containing wastewater.

Simultaneous alleviation of Cd availability in contaminated soil and accumulation in rice (Oryza sativa L.) by Fe-Mn oxide-modified biochar

Fe-Mn oxide-modified biochar (BC-FM) was used to remediate Cd-contaminated soil and mitigate Cd accumulation in rice. The roles of Fe and Mn in soil Cd immobilization and in controlling Cd uptake by rice were investigated via X-ray photoelectron spectroscopy (XPS) characterization and chemical analysis. Fe and Mn loaded on BC-FM increased the removal efficiencies of CaCl₂ extractable Cd in soil and Cd in pore water compared to those in only biochar (BC)-treated soil, with maximum removal rates at 67.9 % and 77.8 %, respectively. The XPS results indicated that the redox reactions of the Fe-Mn oxides on BC-FM surface affected Cd immobilization in the soil. The Fe (II/III) components on BC-FM were primarily converted to Fe₃O₄ in the soil system, which may form stable complexes with Cd²⁺ (Fe-O-Cd) during the entire rice growth period, and Cd may be bound to MnO or Mn₂O₃ in the form of CdMn₂O₄. The excellent adsorption performance of BC-FM enhanced by Fe-Mn oxides reduced the available Cd in the soil and stimulated Fe and Mn transport in rice, thereby inhibiting Cd accumulation in the aerial parts of rice. Cd concentrations in brown rice under BC-FM treatments reached the national safety standard (0.2 mg/kg, GB2762-2017). And BC-FM significantly increased the biomass of brown rice with a maximum rate of 26.8 %. These findings suggest that BC-FM could be used as an efficient material for Cd-contaminated soil remediation, and Fe-Mn plays important role in immobilizing Cd in soil and reducing Cd transport in rice.

Amine-functionalized MOF-derived carbon materials for efficient removal of Congo red dye from aqueous solutions: simulation and adsorption studies

In this study, a novel polyethyleneimine (PEI) modified MOF-derived carbon adsorbent (PEI@MDC) was proposed, which exhibited significant adsorption capacity for Congo Red (CR) in aqueous solutions. FT-IR and XPS results showed that PEI was successfully grafted onto MDC, increasing the content of amine groups on the surface of MDC. The adsorption process conformed to the Langmuir isotherm adsorption model and pseudo-second-order kinetic equation, indicating that the adsorption of CR on PEI@MDC was covered by a single layer, and the adsorption process was controlled by chemical processes. According to the Langmuir model, the maximum adsorption capacity at 30 °C was 1723.86 mg g^-1. Hydrogen bonding and electrostatic interactions between CR and PEI@MDC surface functional groups were the main mechanisms controlling the adsorption process. After five adsorption-desorption cycles, PEI@MDC still showed a high adsorption capacity for CR, indicating that the adsorbent had an excellent regeneration ability.

Biochar for the removal of contaminants from soil and water: a review

Biochar shows significant potential to serve as a globally applicable material to remediate water and soil owing to the extensive availability of feedstocks and conducive physio-chemical surface characteristics. This review aims to highlight biochar production technologies, characteristics of biochar, and the latest advancements in immobilizing and eliminating heavy metal ions and organic pollutants in soil and water. Pyrolysis temperature, heat transfer rate, residence time, and type of feedstock are critical influential parameters. Biochar’s efficacy in managing contaminants relies on the pore size distribution, surface groups, and ion-exchange capacity. The molecular composition and physical architecture of biochar may be crucial when practically applied to water and soil. In general, biochar produced at relatively high pyrolysis temperatures can effectively manage organic pollutants via increasing surface area, hydrophobicity and microporosity. Biochar generated at lower temperatures is deemed to be more suitable for removing polar organic and inorganic pollutants through oxygen-containing functional groups, precipitation and electrostatic attraction. This review also presents the existing obstacles and future research direction related to biochar-based materials in immobilizing organic contaminants and heavy metal ions in effluents and soil.

Graphical Abstract

Polyethylenimine-grafted nitrogen-doping magnetic biochar for efficient Cr(VI) decontamination: Insights into synthesis and adsorption mechanisms

Herein, polyethylenimine (PEI)-grafted nitrogen (N)-doping magnetic biochar (PEI_MW@MNBC_BM) was synthesized, and characterization results showed that the microwave-assisted PEI grafting and ball milling-assisted N doping introduced abundant amino, pyridine N and pyrrole N structures onto biochar, which possessed high affinity to Cr(VI) in the anion form. The as-prepared PEI_MW@MNBC_BM displayed pH-dependence adsorption performance and high tolerance to co-existing ions with maximum uptake capacity of Cr(VI) identified as 183.02 mg/g. Furthermore, PEI_MW@MNBC_BM could bind Cr(VI) through electrostatic attraction, complexion, precipitation, reduction and pore filling. Especially, effective reduction of Cr(VI) was ascribed to cooperative electron transfer of partial oxygen-containing functional groups, intramolecular pyridine/pyrrole N, protonated amino and Fe²⁺ on the adsorbent, while oxygen-containing and amino functional groups from N-doping biochar and PEI synergistically complexed Cr(III) via providing lone pair electrons to form coordinate bonds. Furthermore, the stable precipitation was formed between Fe³⁺ and Cr(III). Additionally, the Cr(VI) elimination efficiency could maintain 95.83% even after four adsorption-desorption cycles, suggesting PEI_MW@MNBC_BM as a high-performance adsorbent for Cr(VI) contaminated water remediation.

Enhanced adsorption of Congo red dye onto polyethyleneimine-impregnated biochar derived from pine needles

Biochar derived from waste pine needles was chemically modified using polyethyleneimine (PEI) to increase its adsorptive potential for withdrawal of anionic dye Congo red from aqueous solution. PEI impregnation on biochar was confirmed from scanning electron microscopy and energy-dispersive X-ray analysis, Fourier transform infrared spectroscopy, and X-ray diffraction analysis. The surface area of biochar decreased after PEI treatment, but the amine groups increased on biochar surface. PEI-treated biochar displayed considerable increase in adsorption at acidic conditions. Adsorption isotherm was best explained by Langmuir model (R² > 99) and the adsorption kinetics agrees well with pseudo-second-order model. The maximum adsorption capacity of PEI-treated biochar was observed to be 294.11 mg g^-1 and 30.76 mg g^-1 for pristine biochar displaying a 9.5-fold increase. The positive value of standard enthalpy of adsorption (∆H° = 14.96 KJmole^-1) indicated the endothermic nature of adsorption, and positive value of entropy (∆S° = 74.43 Jmole^-1 K^-1) revealed the affinity of biochar towards dye molecules. Negative value of Gibb's free energy ∆G° (- 7.2 KJmole^-1) revealed that the process was spontaneous. Electrostatic interaction appeared to be the key mechanism governing the adsorption process. Thus, PEI-impregnated biochar represents novel low-cost sorbent that can effectively remove anionic dyes which are poorly removed by pristine biochar.

Functionalized biochars: Synthesis, characterization, and applications for removing trace elements from water

Biochar (BC) has been recognized as an effective adsorbent to remove trace elements (TEs) from water. However, low surface functionality and small pore size can limit the adsorption ability of pristine biochar. These limitations can be addressed by using functionalized biochars which are developed by physical, chemical, or biological activation of biochar to improve their physico-chemical properties and adsorption efficiency. Despite the large amount of research concerning functionalized biochars in recent decades, to our knowledge, no comprehensive review of this topic has been published. This review focuses solely on the synthesis, characterization, and applications of functionalized/engineered biochars for removing TEs from water. Firstly, we evaluate the synthesis of functionalized biochars by physical, chemical, and biological strategies that yield the desired properties in the final product. The following section describes the characterization of functionalized biochars using various techniques (SEM, TEM, EDS, XRD, XANES/NEXAFS, XPS, FTIR, and Raman spectroscopy). Afterward, the role of functionalized biochars in the adsorption of different TEs from water/wastewater is critically evaluated with an emphasis on the factors affecting sorption efficiency, sorption mechanisms, fate of sorbed TEs from contaminated environments and associated challenges. Finally, we specifically scrutinized the future recommendations and research directions for the application of functionalized biochar. This review serves as a comprehensive resource for the use of functionalized biochar as an emerging environmental material capable of removing TEs from contaminated water/wastewater.

Integrated green complexing agent and biochar modified nano zero-valent iron for hexavalent chromium removal: A characterisation and performance study

In this study, nano zero-valent iron (nZVI) was loaded on biochar (BC) prepared from recycled waste peanut shells. The loaded BC in the nZVI@BC composite was assumed to weaken the agglomeration of nZVI and the environmentally-friendly complexing agents sodium citrate (Cit) and sodium carboxymethyl cellulose (CMC) were used to establish Cit-nZVI@BC and CMC-nZVI@BC for the effective removal of Cr(VI) from aqueous environments. The characterisation results suggested that Cit and CMC not only inhibited the oxidation of nZVI, but also effectively improved its reactivity. The experimental results demonstrated that the Cr(VI) removal efficiency by nZVI was less than 20%, while CMC-nZVI@BC enhanced the Cr(VI) removal efficiency to 80.73%, because CMC was coated on the nZVI surface for anti-passivation and improved the surface activity of nanoparticles. In addition, the Cr(VI) removal efficiency reached almost 100% with Cit-nZVI@BC, and the citrate dissociated the passivation layer on the surface of the zero-valent iron particles to ensure the reactivity of the zero-valent iron. The reaction mechanism of Cit-nZVI@BC includes adsorption, reduction, and co-precipitation, whereas CMC-nZVI@BC also involves surface complexation reactions. The kinetic studies revealed that the removal of Cr(VI) by Cit-nZVI@BC and CMC-nZVI@BC followed the second-order reaction kinetic model, and the reaction rates of Cit-nZVI@BC and CMC-nZVI@BC were both higher than that of nZVI. The results indicate that the prepared systems are promising for Cr(VI) remediation in contaminated environments.

Protective effects of Polygonatum kingianum polysaccharides and aqueous extract on uranium-induced toxicity in human kidney (HK-2) cells

The current detoxification options of uranium, a toxic radioactive heavy metal, have obvious side effects. Polygonatum kingianum (PK), a natural product with the function of antioxidant, may be effective in detoxification and prevention of uranium-induced nephrotoxicity. Here, we studied the protective effects of PK polysaccharides (PKP) and aqueous extract (PKAE) on uranium-induced toxicity in human kidney (HK-2) cells. First, the physicochemical properties of PKP and PKAE were characterized. Assays on cultured cells demonstrated that pretreatment with PKP and PKAE significantly increased metabolic activity, relieved morphological impairments, and alleviated apoptosis. The impairments caused by uranium exposure were ameliorated (mitochondrial membrane potential and ATP level increased while reactive oxygen species decreased). Molecular mechanistic studies revealed that PKP and PKAE alleviated uranium-induced cytotoxicity by regulating mitochondria-mediated apoptosis and the GSK-3β/Fyn/Nrf2 pathway. Collectively, our data support the preventive and therapeutic applications of PKP and PKAE for uranium poisoning.

A Review on Bamboo as an Adsorbent for Removal of Pollutants for Wastewater Treatment

Water and wastewater treatment are very important for obtaining clean and sanitary water as well as protecting the environment from toxic pollutants. Not only enriched with cellulose and carbon but the abundant resources of bamboo also make it suitable to be utilized as an adsorbent. With the right processing technologies and improvements, the potential of bamboo is unlimited. This study review provides knowledge on the use of bamboo-based adsorbents for the removal of contaminants and pollutants in wastewater in the form of activated carbon, biochar, and aerogel. This review highlighted bamboo utilization and its relevance as an adsorbent for wastewater treatment. The technologies for the processing and improvement of bamboo as well as the performance of the bamboo-based adsorbents are also discussed in this study. The adsorption capacity of bamboo has shown improvement with modification and good adsorption capacity achieved with some of the adsorbent being able to be recycled and reused.

Effectively remove p-arsanilic acid from water over amphiphilic amino modified collagen fiber

Efficient and rapid removal of p-arsanilic acid (p-ASA) in water is very important in environmental protection and human health, however it is still a severe challenge in actual engineering. Herein, a novel sorbent (CF-PEI) was successfully fabricated by simply modifying the amphiphilic skin collagen fiber (CF) substrate with Polyethylenimine (PEI). The as-prepared CF-PEI exhibits high-efficiency adsorption for negatively charged p-ASA with aromatic rings due to the introduction of amino groups and the existence of hydrophobic bands, and the maximum adsorption capacity of CF-PEI for p-ASA was high up to 285.71 mg g^-1. In addition, the adsorption mechanism of CF-PEI on p-ASA mainly includes electrostatic interaction, hydrogen bond and amphiphilicity. The multi-level all-fiber structure of CF makes it mainly focus on surface mass transfer with short mass transfer distance, and its capillary drainage effect can realize large flow and rapid separation. CF-PEI based on CF can realize the ability to separate low-concentration p-ASA with high flow rate and high efficiency. The effective processing volume was 12.5 L g^-1 when the separation flux reached as high as 9931.27 L m^-2 h^-1. Notably, the p-ASA adsorbed on CF-PEI was almost completely eluted by NaOH (0.5 mol L^-1). The adsorbent is convenient to prepare, recyclable, high in efficiency, and has a great application prospect in removing organic micro-pollutants.

Preparation and application of polyethyleneimine-modified corncob magnetic gel for removal of Pb(ii) and Cu(ii) ions from aqueous solution

As a biomass resource, corncob is a kind of agricultural by-product with wide sources and low cost. Because its composition contains a large number of functional polymers such as cellulose, chitosan, and semi chitosan, corncob can be chemically modified to prepare a variety of adsorption materials. In this study, a magnetic gel material (PEI-CC@Fe3O4) consisting of corncob modified by glutaraldehyde-crosslinked polyethyleneimine (PEI) was successfully prepared and applied to the adsorption of heavy metal ions in aqueous solutions. The structure, thermal stability, and adsorption of heavy metal ions of the magnetic gel material (PEI-CC@Fe3O4) were characterized by Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction phase analysis (XRD), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). The results showed that PEI was crosslinked to the corncob through Aldol reaction and Schiff-base reaction. The heavy metal ion adsorption experiment showed that the PEI-CC@Fe3O4 had better adsorption toward divalent copper ions and divalent lead ions at 303 K, and the maximum adsorption capacities reached 459.4 mg g-1 and 290.8 mg g-1, respectively. Moreover, the study of isothermal adsorption and adsorption kinetics shows that the adsorption process is pseudo-second-order kinetics model adsorption, which belongs to Langmuir isothermal adsorption. Such excellent adsorption performance will contribute to the application of corncob biomass materials in industrial polluted wastewater.

Tailored metal-organic frameworks facilitate the simultaneously high-efficient sorption of UO22+ and ReO4- in water

The simultaneously efficient extraction of radioactive metal cations and anions from radioactive waste is of great interest for the proper disposal of spent fuel and environmental protection. Modifying metal-organic frameworks (MOFs) into multifunctional materials with controllable and desired properties is an efficient strategy for broadening their practical applications. Herein, poly(ethyleneimine) (PEI) tailored MIL-101(Cr) (MILP) was obtained through an easy operation and low-cost strategy and was utilized to simultaneously extract uranium (UO₂²⁺) and rhenium (ReO₄^-) from water. The effects of PEI coating amounts, system pH, contact time, initial UO₂²⁺/ReO₄^- concentrations, ionic strength, as well as interfering ions were studied to evaluate the sorption performance of MILP composites. The maximum sorption capacity was 416.67 mg/g for UO₂²⁺ at pH 5.5 and 434.78 mg/g for ReO₄^- at pH 3.5, levels that are superior to those of most adsorbents. The sorption of UO₂²⁺/ReO₄^- occurred in a pH-dependent, spontaneous and endothermic manner, which showed preferable modeling by the pseudo-second-order (PSO) kinetic equation and Freundlich isotherm equation. The adsorption of ReO₄^- was inhibited by the coexistence of UO₂²⁺ and high ion strength. Batch experiments and X-ray photoelectron spectroscopy (XPS) results indicate that UO₂²⁺/ReO₄^- sorption was driven by the abundant amino groups and unsaturated metal sites in the MILP-3 composites. MILP-3 also showed excellent recycling performance and maintained high sorption capacities for UO₂²⁺/ReO₄^- in different simulated water samples. This study shows that MILP composites can effectively extract radioactive metal cations and anions from water, and lays a foundation for designing an excellent new category of candidates with versatile functions for wastewater management.

Removal of copper ions by functionalized biochar based on a multicomponent Ugi reaction

Copper is widely present in the natural environment and inevitably poses a risk to both human health and the natural environment. Biochar is an inexpensive, clean and sustainable sorbent material that can be used as a resource for copper removal, and there is interest in new ways to chemically treat biochar to tune its unique properties and modify its atomic structure. In this study, biochar was oxidized, and then polyethyleneimine (PEI) modified chitosan and carboxylated biochar were economically compounded through a multicomponent Ugi reaction to effectively remove Cu(ii). PEI enhances the adsorption of Cu(ii) within an optimum solution pH range of 3.5–5.5. The adsorption process follows a pseudo-second-order kinetic model. When the dosage of BC-NH2 was 4 g L⁻¹ and the temperature was 303 K, the maximum adsorption capacity calculated by the Langmuir model was 26.67 mg g⁻¹. The adsorption process of Cu(ii) on BC-NH2 was heat-trapping and spontaneous. BC-NH2 showed good selectivity for K⁺ and Mg²⁺, and BC-NH2 desorbed by NaOH showed better adsorption performance than H₂SO₄ in the adsorption–desorption cycle. Characterization by SEM, EDS, BET, FTIR, TGA and XPS showed successful coupling and that the amide group of BC-NH2 had chelated with Cu(ii). This atomically economical multicomponent Ugi reaction provides a new option for preparing composite materials that effectively remove heavy metals.

Polyethyleneimine-modified chitosan and carboxylated biochar were economically compounded by a multicomponent Ugi reaction to produce products rich in amide functional groups.

Amine-rich quartz nanoparticles for Cu(II) chelation and their application as an efficient catalyst for oxidative degradation of Rhodamine B dye

The study describes the loading of the quartz SiO₂ nanoparticles (NPs) with (3-aminopropyl)triethoxysilane (APTES) linker with simultaneous lengthening of the linker through the terminal amine group by glutaraldehyde (GA). The reactive polyethylenimine (PEI) was introduced to the surface to increase the ability to capture Cu(II) ions. The composite got the abbreviation SiO₂/PEI-Cu(II). The Cu(II) ions were the active center with a peroxo-complex activation state. The composite characterization included scanning electron microscopy (SEM), transmission electron microscopy (TEM), electron-dispersive X-ray analysis (EDX), Fourier transform infrared spectroscopy (FT-IR), X-ray powder diffraction (XRD), thermogravimetric analysis (TGA), and Brunauer-Emmett-Teller (BET) surface analyzer. The kinetics of the oxidative degradation of Rhodamine B (RhB) dye obeyed the pseudo-first order under flooding conditions. The reaction parameters including the catalyst dose, solution pH, initial concentration of reactants, and temperature got some attention. The obtained results showed that more than 91.7 ± 1% of RhB dye was degraded to CO₂, NH₄⁺, NO₃^-, H₂O, and some inorganic acids after 30 min as confirmed by gas chromatography mass spectrometry and total organic carbon (TOC) measurements. Also, GC-MS spectra for water samples drawn from the reaction in successive periods had suggested a conceivable degradation pathway for RhB by hydroxyl radicals. Degradation starts with de-alkylation then carboxyphenyl removal followed by two successive ring-opening stages. Both the effects of the catalyst recycling and treated water reusability on the reaction rate were studied. The catalyst provided noticeable stability over three consecutive cycles.

Designed Core-Shell Fe3O4@Polydopamine for Effectively Removing Uranium(VI) from Aqueous Solution

Adsorbents with the combination of magnetic separation and removal performance are expected for reducing the adverse impact of nuclear pollution. In this study, the core-shell Fe₃O₄@polydopamine (Fe₃O₄@PDA) was successfully synthesized and used for removal of uranium (U(VI)) ion from aqueous solution. The abundant N-containing groups derived from PDA exist as the chelate sites for U(VI) and contribute greatly for U(VI) removal. Experimental results show that Fe₃O₄@PDA (56.39 mg g^-1) exhibits greater sorption capacity for U(VI) removal compared with the pure Fe₃O₄ (9.17 mg g^-1). The sorption isotherm can be well fitted with Freundlich model and the sorption process is endothermic and spontaneous. The removal of U(VI) can be explained by the complexation of U(VI) with -NH-, -NH₂ and C-O in the surface of Fe₃O₄@PDA by X-ray photoelectron spectroscopy (XPS) analysis.

The removal of uranium using novel temperature sensitive urea-formaldehyde resin: adsorption and fast regeneration

A novel adsorbent of temperature sensitive urea-formaldehyde (TS-UF) resin was synthesized by base/acid two-step synthetic strategy with low formaldehyde/urea mole ratio of 0.8. The sorption kinetics of TS-UF resin obeys the pseudo-second-order model, and the adsorption is an endothermic process. The Langmuir model can well describe the sorption isotherms, through which the Q_max is calculated to be 99.2 mg/g for uranium (VI) at pH 6.0 and T = 298 K. The characterized results show that the functional groups -NH- and -CH₂OH in TS-UF resin have been involved in uranium sorption via chemical interaction. The temperature sensitive property of TS-UF resin significantly accelerates the regeneration of TS-UF resin, which can be fast regenerated within 15 min at its low critical solution temperature 333 K and exhibits high removal efficiency of uranium (VI) (>90%) over 5 cycles. Therefore, TS-UF resin can be as a promising sorbent for the uranium (VI) removal from wastewater due to its low-cost, easy-fabrication, high-efficiency and fast regeneration. This work can not only boost the exploration of novel adsorbent materials, but also promote the investigations of the regeneration and reusability of adsorbents.