Enhanced degradation of triclosan by cobalt manganese spinel-type oxide activated peroxymonosulfate oxidation process via sulfate radicals and singlet oxygen: Mechanisms and intermediates identification

Graphene/MoS2-assisted alum sludge electrode induces selective oxidation for organophosphorus pesticides degradation: Co-oxidation and detoxification mechanism

Designing an electrode that can generate abundant free radicals and 1O2, which can effectively degrade and detoxify organophosphorus pesticides (OPPs) through a co-oxidation pathway, is important. In this study, we prepared a electrode GO/MoS2@AS by supporting MoS2 on alum sludge (AS) under graphene oxide (GO) nanoconfinement. The results show that the dominant role of 1O2 at the cathode and •OHads at the anode for degradation, in addition to the involvement of 1O2 in the cathodic degradation mechanism, can be attributed to the abundant precursor •O2- and H2O2. Furthermore, calculations using density functional theory and toxicity prediction of products show that the energy (∆E) requirements of •OHfree to break the C-O bond of the pyridine ring and phosphate group are higher than that required for 1O2, and this non-radical oxidation plays a key role in detoxification. In contrast, accelerating ring opening and oxidation processes are attributed to radical oxidation. Above all, the cathodic detoxification is more effective than anodic detoxification. Three prevalent OPPs, chlorpyrifos, glyphosate, and trichlorfon, were degraded in the GO/MoS2@AS system by over 90 %, with mineralization rates of 76.66 %, 85.46 %, and 82.18 %, respectively. This study provides insights into the co-oxidation degradation and detoxification mechanism mediated by 1O2 and •OHfree.

The CoO-doped carbon nanotubes enhance electronic performance and effectively activate persulfate for the degradation of sulfafurazole

In recent studies, carbon nanotube (CNTs) materials and their composites have demonstrated remarkable catalytic activity in the activation of persulfate (PS), facilitating the efficient degradation of organic pollutants. In this study, a novel Co loaded carbon nanotubes (CoO@CNT) catalyst was prepared to promote PDS activation for the degradation of sulfafurazole (SIZ). Experimental results, the CNT as a carrier effectively reduces the leaching of cobalt ions and improves the electron transport capacity，whereas the introduced Co effectively activates the PDS, promoting the generation of highly reactive radicals to degrade SIZ. Under optimized conditions (a catalyst dose of 0.2 g/L, a PDS dose of 1 g/L and an initial pH = 9.0), the obtained CoO@CNT demonstrated favorable Fenton-like performance, reaching a degradation efficiency of 95.55% within 30 min. Furthermore, density functional theory (DFT) calculations demonstrate that the introduction of cobalt (Co) accelerates electron transfer, promoting the decomposition of PDS while facilitating the Co2+/Co3+ redox cycling. We further employed the environmental chemistry and risk assessment system (ECOSAR) to evaluate the ecological toxicity of intermediate products, revealing a significant reduction in ecological toxicity associated with this degradation process, thereby confirming its environmental harmlessness. Through batch experiments and studies, we gained a comprehensive understanding of the mechanism and influencing factors of CoO@CNT in the role of SIZ degradation, and provided robust support for evaluating the ecological toxicity of degradation products. This study provides a significant strategy for the development of efficient catalysts incorporating Co for the environmentally friendly degradation of organic pollutants.

Preparation of MWCNT/CoMn2O4 nanocomposite for effectual degradation of picric acid via peroxymonosulfate activation

In recent years, using nanomaterials based on multi-wall carbon nanotubes (MWCNT) through the activation of peroxymonosulfate (PMS) has attracted more attention to the degradation of organic pollutants. This research presented a new route for the synthesis of MWCNT/CoMn2O4 nanocomposite for the degradation of picric acid using advanced oxidation processes (AOPs). Firstly, CoMn2O4 nanoparticles were prepared and then loaded on MWCNT using ultrasonic waves. The results of various analyzes confirmed the successful loading of nanoparticles on carbon nanotubes. As the degradation process proceeds through oxidation processes, the high electronic conductivity of MWCNT and the active sites of Mn and Co in the nanocomposite play an essential role in activating PMS to generate reactive oxygen species (ROS). An investigation of the reaction mechanism in different conditions showed that the highest speed of picric acid decomposition in the presence of nanocomposite (98%) was in 47 min. However, the scavenger test showed that HO· and SO4·- radicals are more important in the degradation process. Meanwhile, the results showed that removing picric acid using MWCNT/CoMn2O4 was more effective than CoMn2O4 alone and confirmed the interaction effect of MWCNT nanotubes with AB2O4 nanocatalyst.

Efficient pollutant degradation by peroxymonosulfate activated by a Co/Mn metal-organic framework

In this work, a three-dimensional bimetallic metal-organic framework (BMOF), BUC-101 (Co/Mn-H6chhc, H6chhc = cis-1,2,3,4,5,6-cyclohexane-hexacarboxylic acid, BUC = Beijing University of Civil Engineering and Architecture) was synthesized by a one-pot solvothermal method and characterized in detail by single crystal X-ray diffraction (SCXRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) element mapping analysis. BUC-101 showed excellent catalytic peroxymonosulfate (PMS) activation performance to degrade rhodamine B (RhB) without energy input. In addition, BUC-101 can maintain good stability and recyclability during the PMS activation processes, in which 99.9% RhB degradation efficiencies could be accomplished in 5 operational runs. The possible PMS activation and RhB degradation mechanisms of the BUC-101/PMS system were proposed and affirmed.

Synchronous removal of oxytetracycline and Cr(Ⅵ) in Fenton-like photocatalysis process driven by MnFe2O4/g-C3N4: Performance and mechanisms

Complex wastewater has more complicated toxicity and potential harm to organisms, and synchronous REDOX of complex pollutants in wastewater has always been a bottleneck in the development of advanced oxidation technology. Herein, a Fenton-like photocatalytic system (MnFe2O4/g-C3N4 heterojunction composites) was established to simultaneously remove oxytetracycline (OTC) and Cr(Ⅵ) in this study. The MnFe2O4/g-C3N4 heterojunction composites exhibited outstanding catalytic performances for OTC and Cr(Ⅵ) removal, and more than 90% of OTC and nearly 100% of Cr(Ⅵ) were simultaneously removed within 1 min photocatalysis. The photo-generared electrons and holes played significant roles in Cr(Ⅵ) reduction and OTC degradation, respectively. Moreover, the heterojunction formed between g-C3N4 and MnFe2O4 effectively accelerated the separation and migration of photogenerated carriers. The OTC degradation was mainly initiated by cracking of benzene rings, degradation of substituents, and removal of groups such as -OH, -NH2, -CH3, and -CONH2, resulting in generation of small molecular substances; Cr(Ⅲ) was the main reduction product of Cr(Ⅵ). Meanwhile, the MnFe2O4/g-C3N4 heterojunction composites also exhibited excellent stability and reusability in removal of OTC and Cr(Ⅵ).

Inhibition mechanisms of biochar-derived dissolved organic matter to triclosan photodegradation: A remarkable role of aliphatics

Endocrine disrupting chemicals like triclosan (TCS) have been thought to be an emergent environmental pollutant. The ubiquitous dissolved organic matter (DOM) is able to interrelate with TCS and hamper its phototransformation. However, how the components in DOM can inhibit the photodegradation of DOM/TCS complex is largely unknown. Herein, we discovered that TCS photodegradation with biochar-derived DOM (BDOM) was interfered by both binding affinity and reactive oxygen species (ROS) productivity. BDOM can not only stimulate TCS photodegradation by producing ROS, but also inhibit the removal of TCS through the interactions between BDOMs and TCS. The quantification of BDOM's impact on TCS photodegradation revealed that BDOM hampered TCS removal with the proportion of -7.95 to -11.24% at pH 8.5, but strengthened it to 13.20% at pH 7.0. Binding process was more easily to inhibit TCS photodegradation in molecular form, while anionic TCS photodegradation was dominated by ROS productivity. Different inhibition mechanisms were involved in TCS photodegradation depending on the components of BDOMs. The hydroxyls and aromatic carbonyls might have hindered the attack of ROS on the phenolic hydroxyl of TCS via hydrogen bond interaction or π-π electron donor-acceptor interaction. Through hydrophobic interaction, the mobile aliphatics could greatly shield TCS to prevent ROS attack by wrapping or twining TCS, playing a significant role in inhibiting TCS removal. Results from this present study can afford a new viewpoint in elucidating the function of BDOMs in the phototransformation of organics and decrease the spread of antibiotic resistance genes.

Facilitated Visible-Light-Driven Peroxymonosulfate Activation by a Co-Fe Layered Double Hydroxide Derived p-n Heterostructure for Sulfadiazine Degradation: Affecting Parameters, Kinetics, and Mechanistic Insights

The utilization of multivalence ionic metal species generated through a peroxymonosulfate (PMS)-assisted photocatalytic system is a promising platform for the selective degradation of water contaminants. However, achieving an effective electron transport and enhanced separation efficiency for these metal species is a daunting challenge. Thus, our current study addresses this challenge by using a Co-Fe-based layered-double-hydroxide template to synthesize a Co3O4/FeCo2O4 p-n heterojunction composite via a simple monosynthetic route. The resultant composite is thoroughly validated through advanced characterization techniques that efficiently activate PMS for sulfadiazine (SDZ) degradation under visible light, achieving a remarkable degradation efficiency of up to 90%. This accomplishment is attributed to factors including intimate interfacial contact, excellent light harvesting, mesoporosity, and oxygen vacancies within the composite. The formation of a distinct p-n heterojunction following the S-scheme charge dynamic significantly enhances photogenerated carrier separation and reduces charge recombination. The research delves into comprehensive investigations including degradation studies, active species trapping experiments, parameter exploration, and in-depth liquid chromatography-mass spectrometry for analysis of the degradation byproducts and pathway. Induced oxygen vacancies, strategically placed active surface sites, and mesoporosity in the Co3O4/FeCo2O4 composite synergistically boosted the sluggish PMS activation, leading to enhanced SDZ degradation. This study introduces a new perspective by demonstrating the potential of a single-material, mixed-metal oxide-based p-n heterojunction photocatalytic system following the S-scheme charge-transfer route for SDZ degradation. The findings contribute toward emphasizing the importance of tailored composite materials in tackling persistent contaminants.

Dual Activation of Peroxymonosulfate Using MnFe2O4/g-C3N4 and Visible Light for the Efficient Degradation of Steroid Hormones: Performance, Mechanisms, and Environmental Impacts

Single activation of peroxymonosulfate (PMS) in a homogeneous system is sometimes insufficient for producing reactive oxygen species (ROS) for water treatment applications. In this work, manganese spinel ferrite and graphitic carbon nitride (MnFe2O4/g-C3N4; MnF) were successfully used as an activator for PMS under visible light irradiation to remove the four-most-detected-hormone-contaminated water under different environmental conditions. The incorporation of g-C3N4 in the nanocomposites led to material enhancements, including increased crystallinity, reduced particle agglomeration, amplified magnetism, improved recyclability, and increased active surface area, thereby facilitating the PMS activation and electron transfer processes. The dominant active radical species included singlet oxygen (1O2) and superoxide anions (O2•-), which were more susceptible to the estrogen molecular structure than testosterone due to the higher electron-rich moieties. The self-scavenging effect occurred at high PMS concentrations, whereas elevated constituent ion concentrations can be both inhibitors and promoters due to the generation of secondary radicals. The MnF/PMS/vis system degradation byproducts and possible pathways of 17β-estradiol and 17α-methyltestosterone were identified. The impact of hormone-treated water on Oryza sativa L. seed germination, shoot length, and root length was found to be lower than that of untreated water. However, the viability of both ELT3 and Sertoli TM4 cells was affected only at higher water compositions. Our results confirmed that MnF and visible light could be potential PMS activators due to their superior degradation performance and ability to produce safer treated water.

A novel peroxymonosulfate activation process by single-atom iron catalyst from waste biomass for efficient singlet oxygen-mediated degradation of organic pollutants

Single-atom dispersed catalysts (SACs) have gained considerable attention in organic contaminants remediation due to their superior reactivity and stability. However, the complex and costly synthesis processes limit their practical applications in environmental protection. Herein, a facile and cost-effective single-atom iron catalyst (Fe-SA/NC) anchored on nitrogen-doped porous carbon was first fabricated by using waste biomass as a carbon source. The Fe-SA/NC catalyst exhibited outstanding performance with a high turnover frequency of 1.72 min^-1 toward antibiotics degradation via peroxymonosulfate activation. ECOSAR program and algae growth experiments demonstrated that the byproducts produced during the sulfamethoxazole degradation process were not detrimental to the aquatic environment. Radical quenching and electron paramagnetic resonance experiments revealed that Fe-SA/NC remarkably promoted ¹O₂ production in PMS-assisted reaction, and thus ¹O₂ contributed as much as 78.77% to sulfamethoxazole degradation. As indicated by experiment and density functional theory (DFT) calculations, FeN₂O₂ configuration serves as the active site. DFT calculations further presented the most rational generation route of ¹O₂ as PMS→OH* →O* →¹O₂. We also designed Fe-SA/NC embedded spherical pellets for contaminants elimination at the device level. This study offers new insights into the synthesis of SACs from waste biomass and their practical application in environmental remediation.

A critical review on correlating active sites, oxidative species and degradation routes with persulfate-based antibiotics oxidation

At present, numerous heterogeneous catalysts have been synthesized to activate persulfate (PS) and produce various reactive species for antibiotic degradation from water. However, the systematic summary of the correlation among catalyst active sites, PS activation pathway and pollutant degradation has not been reported. This review summarized the effect of metal-based, carbon-based and metal-carbon composite catalysts on the degradation of antibiotics by activating PS. Metal and non-metal sites are conducive to inducing different oxidation pathways (SO₄^•-, ^•OH radical oxidation and ¹O₂ oxidation, mediated electron transfer, surface-bound reactive complexes and high-valent metal oxidation). SO₄^•- and ^•OH are easy to attack CH, S-N, CN bonds, CC double bonds and amino groups in antibiotics. ¹O₂ is more selective to the structure of the aniline ring and amino group, and also to attacking CS, CN and CH bonds. Surface-bound active species can cleave CC, SN, CS and CN bonds. Other non-radical pathways may also induce different antibiotic degradation routes due to differences in oxidation potential and electronic properties. This critical review clarified the functions of active sites in producing different reactive species for selective oxidation of antibiotics via featured pathways. The outcomes will provide valuable guidance of oriented-regulation of active sites in heterogeneous catalysts to produce on-demand reactive species toward high-efficiency removing antibiotics from water.

Highly Active Manganese Oxide from Electrolytic Manganese Anode Slime for Efficient Removal of Antibiotics Induced by Dissociation of Peroxymonosulfate

In this paper, high-activity manganese oxide was prepared from electrolytic manganese anode slime to realize the efficient removal of antibiotics. The effects of sulfuric acid concentration, ethanol dosage, liquid-solid ratio, leaching temperature and leaching time on the leaching of manganese from electrolytic manganese anode slime were systematically studied. Under the optimal conditions, the leaching rate of manganese reached 88.74%. In addition, a Mn₃O₄ catalyst was synthesized and used to activate hydrogen persulfate (PMS) to degrade tetracycline hydrochloride (TCH). The synthesized Mn₃O₄ was characterized by XRD, XPS, Raman, SEM and HRTEM. As a result, the prepared Mn₃O₄ is spherical, with high purity and crystallinity. The catalytic activity of Mn₃O₄ for PMS to degrade TCH was increased to 82.11%. In addition, after four cycles, the performance remained at 78.5%, showing excellent stability and recyclability. In addition, O₂^- and ¹O₂ are the main active species in the degradation reaction. The activity of Mn₃O₄ is attributed to it containing Mn(II) and Mn(III) at the same time, which can quickly realize the transformation of high-valence and low-valence manganese, promote the transfer of electrons and realize the degradation of organic pollutants.

Photoelectrocatalytic peroxymonosulfate activation over CoFe2O4-BiVO4 photoanode for environmental purification: Unveiling of multi-active sites, interfacial engineering and degradation pathways

This work reported on the development of CoFe₂O₄-BiVO₄ photoanode based photoelectrocatalytic system collaborating with peroxymonosulfate activation for organic contaminants removal. CoFe₂O₄ layer not only provided active sites for direct peroxymonosulfate activation but also accelerated charge separation process for the enhancement of photocurrent density and photoelectrocatalytic performance. Junction of CoFe₂O₄ layer on BiVO₄ photoanode led to the improvement of photocurrent density to 4.43 mA/cm² at 1.23 V_RHE, which was approximately 4.06 times higher than that of pure BiVO₄. Subsequently, the corresponding optimal degradation efficiency toward the tetracycline model contaminant achieved to be 89.1% with total organic carbon removal value of about 43.7% within 60 min. Moreover, the degradation rate constant of CoFe₂O₄-BiVO₄ photoanode in photoelectrocatalytic system was 0.037 min^-1, which was about 1.23, 2.64 and 3.70 times higher than the values in photocatalysis, electrocatalysis and PMS only based systems, respectively. In addition, radical scavenging experiments and electron spin resonance spectra indicated a synergy of radical and nonradical coupling process where •OH and ¹O₂ played vital roles during tetracycline degradation. Plausible photoelectrocatalytic mechanism and degradation pathway were proposed. This work provided an effective strategy to construct peroxymonosulfate assisted photoelectrocatalytic system toward green environmental applications.

Peroxymonosulfate activated by composite ceramic membrane for the removal of pharmaceuticals and personal care products (PPCPs) mixture: Insights of catalytic and noncatalytic oxidation

A composite manganese-based catalytic ceramic membrane (Mn-CCM) was developed by a solid-state sintering method, and its effectiveness toward activation of peroxymonosulfate (PMS) for the degradation of 11 pharmaceutical and personal care products (PPCPs) mixture was tested. The optimized Mn-CCMs/PMS system showed remarkable degradation efficiencies for PPCPs mixture with total removal >90% in ultrapure water, river water and natural organic matter (NOM) solution. The Mn-CCMs/PMS system showed the contribution of different phenomena in PPCPs removal in the order of catalytic oxidation (54.7%, Mn-CCMs/PMS) > noncatalytic oxidation (42.3%, PMS oxidation) > adsorption (3.0%, by Mn-CCMs). The singlet oxygen (¹O₂) was the dominant reactive oxygen specie for the degradation of PPCPs in all water matrices proved by the quenching experiments and electro-paramagnetic resonance (EPR) spectroscopy. The extraordinary stability of Mn-CCMs for the activation of PMS has been noted in terms of repeatability experiments for PPCPs degradation with fewer leaching of Mn (1.9 to 3.6 µg/L). Mineralization was achieved in the range of 28-65% for different water matrices. The toxicity of the PPCPs mixture was reduced by 85.9%. The Mn-CCMs/PMS system showed a reduction (25-100%) in precursors of different carbon- and nitrogen-based disinfection by-products. This study found the Mn-CCMs/PMS system as a feasible purification unit for removing trace concentrations of PPCPs (ng/L) in real drinking water matrices.

Alkali-catalyzed hydrothermal oxidation treatment of triclosan in soil: Mechanism, degradation pathway and toxicity evaluation

The continuous accumulation of chlorinated organic pollutants in soil poses a potential threat to ecosystems and human health alike. Alkali-catalyzed hydrothermal oxidation (HTO) can successfully remove chlorinated organic pollutants from water, but it is rarely applied to soil remediation. In this work, we assessed this technique to degrade and detoxify triclosan (TCS) in soil and we determined the underlying mechanisms. The results showed a dechlorination efficiency of TCS (100 mg per kg soil) of 49.03 % after 120 min reaction (H₂O₂/soil ratio 25 mL·g^-1, reaction temperature 180 °C in presence of 1 g·L^-1 NaOH). It was found that soil organic constituents (humic acid, HA) and inorganic minerals (SiO₂, Al₂O₃, and CaCO₃) suppressed the dechlorination degradation of TCS, with HA having the strongest inhibitory effect. During alkali-catalyzed HTO, the TCS molecules were effectively destroyed and humic acid-like or fulvic acid-like organics with oxygen functional groups were generated. Fluorescence spectroscopy analysis showed that hydroxyl radicals (OH) were the dominant reactive species of TCS degradation in soil. On the basis of the Fukui function and the degradation intermediates, two degradation pathways were proposed. One started with cleavage of the ether bond between the benzene rings of TCS, followed by dechlorination and the opening of benzene via oxidation. The other pathway started with direct hydroxylation of the benzene rings of TCS, after which they were opened and dechlorinated through oxidation. Analysis of the soil structure before and after treatment revealed that the soil surface changed from rough to smooth without affecting soil surface elements. Finally, biotoxicity tests proved that alkali-catalyzed HTO effectively reduced the toxicity of TCS-contaminated soil. This study suggests that alkali-catalyzed hydrothermal oxidation provides an environmentally friendly approach for the treatment of soil contaminated with chlorinated organics such as TCS.

Bisphenol A removal in treated wastewater matrix at neutral pH using magnetic graphite intercalation compounds as persulfate activators

Effluents of municipal wastewater treatment plants (WWTPs) are major sources for releasing contaminants of emerging concern (CECs) into the aquatic environment, which can result in negative effects on aquatic ecosystems and, as a consequence, on humans. Herein, the graphite intercalation concept was used to synthesize heterogeneous catalysts to degrade bisphenol A (BPA) as a model CEC in municipal WWTP effluents at neutral pH. The catalyst was synthesized using the simple molten salt method and showed several benefits, such as iron leaching prevention and stability in environmental matrices. Different methods were applied to describe the catalyst's structural characteristics. The proposed system removed 99.3% of BPA in 75 min using 2 g/L of the synthesized catalyst and 1.19 g/L (5 mM) persulfate at neutral pH. Quenching experiments showed that catalytic activities and BPA removals were significantly aided by both radical and non-radical pathways through the generation of free radicals and singlet oxygen (¹ O₂ ). Furthermore, the reuse of recycled synthesized catalyst was investigated on treated urban wastewater, and the results showed that the catalyst could degrade BPA from the wastewater in consecutive cycles, demonstrating its applicability under real conditions. PRACTITIONER POINTS: BPA was effectively removed from the effluents of municipal WWTPs at neutral pH. A new catalyst (magnetic GIC) was fabricated for heterogeneous catalytic systems. The catalyst activates persulfate to generate free radicals and ¹ O₂ , indicating that radical and non-radical pathways contribute to BPA degradation. The catalyst showed the ability to remove BPA even in the sixth cycle of use, demonstrating its stability and reusability.

Mechanistic and structure investigation of the KOH activation ZIF-8 derived porous carbon as metal-free for unprecedented peroxymonosulfate activation degradation of bisphenol A

The high-performance and free secondary pollution of the catalysts are the most critical issues in the peroxymonosulfate-based advanced oxidation processes (PMS-AOPs). In this research, the KOH was used to activate ZIF-8 derived carbon materials to synthesize the NC-KOH-x (x = 700, 800, 900 °C), which was an effective metal-free PMS activator. As-prepared NC-KOH-x showed significant improvement not only pore structure and BET surface area but also CO groups, and graphite N content, which were beneficial for the adsorptive and oxidative reaction. The NC-KOH-900 as an excellent metal-free carbon-catalyst exhibited considerable reactivity for bisphenol A (BPA) removal in broad pH ranges. Almost 100% of BPA was eliminated using 9 mg NC-KOH-900, 0.5 mM PMS within 60 min. Interestingly, It was found that the BPA removal efficiency by adding PMS after saturated adsorption of NC-KOH-x was better than that by adding NC-KOH-x and PMS simultaneously. Electronic paramagnetic resonance (EPR) and quenching experiments results demonstrated that the BPA degradation relied mainly on the nonradical (¹O₂) pathways and the defects (I_D/I_G), graphitic nitrogen, pyridinic nitrogen, and CO were verified as leading catalytic sites for BPA degradation via PMS activation. Finally, degradation pathways of BPA were proposed and the Toxicity Estimation Software Tool (T.E.S.T.) result implicated that the intermediates of BPA were environmentally friendly to the microorganism and recycled in the ecosystem. The outcomes of this study illustrated the NC-KOH-x owned many merits of state-of-the-art, eco-friendly, and high-performance for great potential practical application value.

Mn2O3/Mn3O4-Cu1.5Mn1.5O4 spinel as an efficient Fenton-like catalyst activating persulfate for the degradation of bisphenol A: Superoxide radicals dominate the reaction

In this work, a Mn₂O₃/Mn₃O₄-Cu_1.5Mn_1.5O₄ spinel was fabricated and utilised as a catalyst to activate peroxydisulfate (PDS) leading to degradation of bisphenol A (BPA). The results showed that the system exhibited an excellent turnover frequency (TOF) of 2.7 × 10^-3 s^-1 and high stability. The amount of ion leaching was small and the degree of mineralisation was up to 66.2%. Superoxide radicals (O₂^-) were determined to be the dominant active species in the system. ≡Mn(II) and oxygen vacancies (V_o) were found to be the main active sites at the catalyst surface. The activation of PDS by the spinel catalyst and the reduction of dissolved oxygen both contributed to the production of O₂^- species. The synergistic effect of ≡Cu(I)/≡Cu(II) and ≡Mn(II)/≡Mn(III) redox pairs enabled the reaction to occur continuously. These results suggest the promise of this novel spinel catalyst in the removal of refractory organic compounds due to its excellent performance and stability. The catalyst may thus have great utility for environmental remediation.

Efficient Activation of Peroxymonosulfate by Biochar-Loaded Zero-Valent Copper for Enrofloxacin Degradation: Singlet Oxygen-Dominated Oxidation Process

The removal of contaminants of emerging concern (CECs) has become a hot research topic in the field of environmental engineering in recent years. In this work, a simple pyrolysis method was designed to prepare a high-performance biochar-loaded zero-valent copper (CuC) material for the catalytic degradation of antibiotics ENR by PMS. The results showed that 10 mg/L of ENR was completely removed within 30 min at an initial pH of 3, CuC 0.3 g/L, and PMS 2 mmol/L. Further studies confirmed that the reactive oxygen species (ROS) involved in ENR degradation are ·OH, SO4-·, ¹O₂, and O2-. Among them, ¹O₂ played a major role in degradation, whereas O2-· played a key role in the indirect generation of ¹O₂. On the one hand, CuC adsorbed and activated PMS to generate ·OH, SO4-· and O2-·. O2-· was unstable and reacted rapidly with H₂O and ·OH to generate large amounts of ¹O₂. On the other hand, both the self-decomposition of PMS and direct activation of PMS by C=O on biochar also generated ¹O₂. Five byproducts were generated during degradation and eventually mineralized to CO₂, H₂O, NO3-, and F^-. This study provides a facile strategy and new insights into the biochar-loaded zero-valent transition-metal-catalyzed PMS degradation of CECs.

Nonradical electron transfer-based peroxydisulfate activation by a Mn-Fe bimetallic oxide derived from spent alkaline battery for the oxidation of bisphenol A

Mn-Fe bimetallic oxide has been employed as an outstanding peroxydisulfate (PDS) activator, but the underlying mechanism is still controversial. In this work, Mn_0.27FeO_4.55 (MFBO) was synthesized using the recovered waste alkaline battery and its catalytic activity and mechanism for PDS activation were explored in detail. Results show that MFBO exhibited a higher catalytic activity than the individual single metal oxides (FeO_x and Mn₂O₃) due to the synergistic effect between Fe and Mn elements. The removal efficiency of bisphenol A (BPA) with an initial concentration of 10 mg/L reached 97.8% within 90 min in the presence of 0.5 g/L MFBO and 2.0 mM PDS. Moreover, the MFBO maintained high stability and reusability even after being recycled for five times. With the aid of a series of experiments and ex-situ/in-situ characterizations, a non-radical PDS activation mechanism was proposed, in which organic contaminants would be oxidized through a direct electron transfer pathway mediated by the metastable reactive complexes (MFBO-PDS*). Notably, the MFBO/PDS system revealed selective oxidation towards different organic pollutants and the reaction rates were closely related to their structures and properties. The research provided an effective alternation process for application of the waste battery, as well as developed a novel perspective for removal of recalcitrant aqueous contaminants through a nonradical mechanism.

Electron delocalization triggers nonradical Fenton-like catalysis over spinel oxides

Nonradical Fenton-like catalysis offers opportunities to overcome the low efficiency and secondary pollution limitations of existing advanced oxidation decontamination technologies, but realizing this on transition metal spinel oxide catalysts remains challenging due to insufficient understanding of their catalytic mechanisms. Here, we explore the origins of catalytic selectivity of Fe-Mn spinel oxide and identify electron delocalization of the surface metal active site as the key driver of its nonradical catalysis. Through fine-tuning the crystal geometry to trigger Fe-Mn superexchange interaction at the spinel octahedra, ZnFeMnO₄ with high-degree electron delocalization of the Mn-O unit was created to enable near 100% nonradical activation of peroxymonosulfate (PMS) at unprecedented utilization efficiency. The resulting surface-bound PMS* complex can efficiently oxidize electron-rich pollutants with extraordinary degradation activity, selectivity, and good environmental robustness to favor water decontamination applications. Our work provides a molecule-level understanding of the catalytic selectivity and bimetallic interactions of Fe-Mn spinel oxides, which may guide the design of low-cost spinel oxides for more selective and efficient decontamination applications.

Nanoarchitecturing TiO2/NiCr2O4 p-n heterojunction photocatalysts for visible-light-induced activation of persulfate to remove tetracycline hydrochloride

Herein, TiO₂/NiCr₂O₄ nanocomposites with p-n heterojunctions were synthesized via a refluxing method and used with peroxydisulfate (PDS) to produce extensive reactive radicals. Textural, optical, photoelectrochemical, structural, and morphological properties of the prepared materials were extensively investigated. After adding 1.48 mM PDS, the removal rate constant of tetracycline hydrochloride (TH) over the TiO₂/NiCr₂O₄ (20%)/PDS system was almost 20.5, 7.24, and 5.91-times as high as the pristine TiO₂, TiO₂/PDS, and TiO₂/NiCr₂O₄ (20%) samples, respectively. Therefore, the synergistic effect of PDS and heterogeneous photocatalysis remarkably impacted the degradation reaction of TH. It was proposed that all h⁺, ^•O₂^-, ^•OH, and SO₄^•- contributed to the degradation reaction. According to the formation of heterojunction between n-TiO₂, and p-NiCr₂O₄ semiconductors, a plausible mechanism for removal of different contaminants in the TiO₂/NiCr₂O₄/PDS system was discussed.

Efficient activation of peroxymonosulfate by nanotubular Co3O4 for degradation of Acid Orange 7: performance and mechanism

Morphology optimization of catalysts has been considered as a viable strategy to improve the catalytic efficiency for peroxymonosulfate (PMS) activation by providing high surface area and abundant active sites. In this study, nanotubular Co₃O₄ (NT-Co₃O₄) was successfully synthesized as a PMS activator for the rapid removal of acid orange 7 (AO7) in aqueous solutions. Characterization results showed that NT-Co₃O₄ presented as aggregated nanotubes, with an average pore diameter of 10 nm. The specific surface area of NT-Co₃O₄ was as high as 41.8 m² g^-1. Catalytic experiments demonstrated that the degradation rate of AO7 in the NT-Co₃O₄/PMS system was 15 times greater than that in commercially available Co₃O₄/PMS system. The effects of various experimental parameters, including catalyst dose, PMS dose, pH, and temperature, were comprehensively investigated. The reactive species in the NT-Co₃O₄/PMS system were identified as sulfate radical (SO₄^•-) through both quenching tests and electron paramagnetic resonance (EPR) technology, and ≡CoOH⁺ played an important role in PMS activation. N atoms in the AO7 molecule were found to be preferentially attacked by SO₄^•-. Moreover, the good stability and reusability of NT-Co₃O₄ were confirmed by a five-cycle AO7 removal experiment. This study provides a broader view of the potential applications of nanotubular materials to achieve highly efficient PMS activation in treating dyes in wastewater.

Mechanistic insights of removing pollutant in adsorption and advanced oxidation processes by sludge biochar

With the accelerated industrialization, more and more sewage sludge (SS) needs to be treated properly. The conversion of sludge into harmless biochar material with dual utilization value of adsorption and catalysis by pyrolysis is in line with the concept of sustainable development. However, the reaction mechanisms of pristine sludge biochar (SDBC) and its composites (SDBCs) in adsorption, persulfate (PS), and Fenton-like advanced oxidation processes (AOPs) are very closely related to its adsorption performance and catalytic efficiency. In this paper, from the application mechanisms of SDBC in adsorption and AOPs, we review in detail the common methods for synthesizing SDBC and their characteristics. We discuss the synthesis techniques that affect the structural, chemical, and catalytic properties of SDBC, including gasification, pyrolysis, and hydrothermal carbonation (HTC). The pyrolysis temperature, environmental factors, and sludge characteristics have important effects on the properties of SDBC, leading to different mechanisms in adsorption and catalytic processes. Furthermore, this paper systematically generalizes the mechanisms of SDBCs in adsorption, where π-π interactions and electrostatic attractions are the main adsorption mechanisms. Then, activation mechanisms of SDBCs in PS and Fenton-like AOPs systems are discussed, including free radical pathways and non-free radical pathways. Finally, we present several challenges and perspectives for the application of SDBC and SDBCs in the field of adsorption, PS, and Fenton-like AOPs from the mechanistic point of views.

Degradation of methyl orange by pyrite activated persulfate oxidation: mechanism, pathway and influences of water substrates

Degradation mechanism of methyl orange (MO), a typical azo dye, with pyrite (FeS₂) activated persulfate (PS) was explored. The results showed that when the initial concentration of MO was 0.1 mM, FeS₂ was 1.6 g/L and PS was 1.0 mM, the removal rate of MO could reach 92.9% in 150 min, and the removal rate of total organic carbon could reach 14.1%. In addition, both pH ≤ 2 and pH ≥ 10 could have an inhibitory effect in the FeS₂/PS system. Furthermore, Cl^- and low concentrations of HCO^-₃ had little effect on the degradation of MO with FeS₂/PS. However, H₂PO^-₄ and high concentrations of HCO^-₃ could inhibit the degradation of MO in the system. Besides, MO in river water and tap water were not degraded in FeS₂/PS system, but acidification (pH = 4) would greatly promote the degradation. In addition, the removal rate of MO with FeS₂/PS could still reach about 90% after five cycles of FeS₂. Furthermore, the intermediates and possible degradation pathways were speculated by LC-MS, and the degradation mechanism of MO by FeS₂/PS was that the cycle of Fe(III)/Fe(II) could continuously activate persulfate to produce SO₄^•-. The results could provide technical support for azo dye degradation in the FeS₂/PS system.

Efficient degradation of aqueous organic contaminants in manganese(II)/peroxymonosulfate system assisted by pyridine organic ligands

Although manganese(II) is known to have no role in peroxymonosulfate (PMS) activation, through a series of sulfamethoxazole (SMX) oxidation experiments, we found that the addition of pyridine organic ligands can improve the catalytic activity and accelerate SMX oxidation. For the organic ligands to be effective: the stability constant of the Mn(III) complex should be higher than that of the Mn(II) complex. A positive correlation was observed between the SMX oxidation rate and Mn(II) concentration, and the maximum PMS utilization efficiency was achieved. Many shreds of evidence verified that neither •SO₄^- nor •OH was associated with SMX oxidation. The enhanced effect of phenanthroline on the Mn(II)/PMS system was attributed to the highly oxidative intermediate manganese species (Mn(V)), originating from the two-electron transfer reaction of complexed Mn(III) and PMS. Notably, the main oxidizing species did not change (η-(PMSO₂) ∼ 100%) regardless of the initial PMSO concentration or pH value. Additionally, the analysis of SMX degradation products revealed that the oxygen transfer oxidation pathway was dominant in the Mn(II)/phenanthroline/PMS system, while the N radical coupling pathway also contributed significantly to SMX oxidation. This work offers new insights into the formation of high-valent manganese species and provides a potential strategy for applying low-concentration Mn(II) to wastewater treatment.

Recent Advances in Endocrine Disrupting Compounds Degradation through Metal Oxide-Based Nanomaterials

Endocrine Disrupting Compounds (EDCs) comprise a class of natural or synthetic molecules and groups of substances which are considered as emerging contaminants due to their toxicity and danger for the ecosystems, including human health. Nowadays, the presence of EDCs in water and wastewater has become a global problem, which is challenging the scientific community to address the development and application of effective strategies for their removal from the environment. Particularly, catalytic and photocatalytic degradation processes employing nanostructured materials based on metal oxides, mainly acting through the generation of reactive oxygen species, are widely explored to eradicate EDCs from water. In this review, we report the recent advances described by the major publications in recent years and focused on the degradation processes of several classes of EDCs, such as plastic components and additives, agricultural chemicals, pharmaceuticals, and personal care products, which were realized by using novel metal oxide-based nanomaterials. A variety of doped, hybrid, composite and heterostructured semiconductors were reported, whose performances are influenced by their chemical, structural as well as morphological features. Along with photocatalysis, alternative heterogeneous advanced oxidation processes are in development, and their combination may be a promising way toward industrial scale application.

Mechanism study of CoS2/Fe(III)/peroxymonosulfate catalysis system: The vital role of sulfur vacancies

Peroxymonosulfate (PMS) activation methods have attractive advantages in advanced oxidation process (AOPs) due to their powerful ability of directly or indirectly generating various reactive oxygen species (ROS). Herein, trace amount of Fe(III) ions were added into the commercial-CoS₂/PMS system to improve the CoS₂/PMS decomposition for organics removal. The organics removal efficiency could reach >90% towards methylene blue (MB), diclofenac sodium (DCF), sulfamethoxazole (SMX) and bisphenol A (BPA) in the CoS₂/Fe(III)/PMS system, with the kinetic apparent rate constant k_obs of 0.141, 0.206, 0.247 and 0.091 min^-1, respectively. The synergistic effect between Fe(III) ions and sulfur-vacancies on CoS₂ for PMS degradation were revealed for the first time in cobalt sulfides/PMS system. Quenching experiments and ESR analysis proved that ¹O₂ was the major ROS and was produced mainly by the hydrolysis of SO₅^•-. Besides, the high degradation efficiency was obtained by the contribution of SO₄^•- and ^•OH. Electron spin-resonance spectroscopy (ESR), cyclic voltammetry (CV) and Raman spectrum data revealed that the addition of Fe(III) ions could optimize the intensity of sulfur vacancies on the CoS₂ surface, which hindered the PMS reduction ability of Co(II), but accelerated the PMS oxidation to form ¹O₂. The degradation path of MB was analyzed by liquid chromatograph-mass spectrometer (LC-MS). The mechanism studies speculated that the sulfur vacancies of CoS₂ provided the binding sites for Fe(III) ions with Co(II), which facilitated the PMS activation by Co(III).

The synergistic interactions of reaction parameters in heterogeneous peroxymonosulfate oxidation: Reaction kinetic and catalytic mechanism

The reaction parameters including catalyst dosage, oxidant amount, initial contaminant concentration and pH etc. play the crucial roles in the heterogeneous persulfate oxidation processes, while the synergistic interactions among these reaction parameters are still obscure. We herein took an efficient heterogeneous persulfate oxidation system "bimetallic Mn_xCo_3-xO₄ solid solution (MnCo) activated peroxymonosulfate (PMS)" for carbamazepine (CBZ) removal from water. MnCo/PMS system exhibited outstanding performance that CBZ was completely removed within 10 min. The CBZ degradation performance was ascribed to the radical oxidation of SO₄^·- and O₂·^-, the nonradical oxidation of ¹O₂, the redox cycles between Mn and Co species and synergistic interactions among MnCo, PMS and CBZ. By monotonously or synchronously adjusting the MnCo dosage, PMS amount and initial CBZ concentration, the inherent connections of different reaction parameters were established. Strong and different synergistic interactions between MnCo and PMS, and among MnCo, PMS and CBZ, were existed due to the formation of three different reaction modes when reaction parameters met certain conditions. The features of the modes were "two-stage, the following auto-deceleration", "one-stage, constant velocity" and "two-stage, the following auto-acceleration". This discovery may provide new insights into the synergistic interactions of reaction parameters in advanced oxidation processes for wastewater treatment.

A review of microwave-assisted advanced oxidation processes for wastewater treatment

Microwave (MW) technology has gained increasing interest in wastewater treatment due to its unique properties, such as fast and uniform heating, hot spots effect, and non-thermal effect. MW enhances the production of active radicals (e.g., OH, SO₄^-), which exerts a stronger integrated treatment effect in combination with advanced oxidation processes. Over the years, microwave-assisted advanced oxidation processes (MW-AOPs) have developed rapidly to degrade pollutants as innovative treatment approaches. This paper provides a detailed classification and a comprehensive review of MW-AOPs. The latest applications of MW in different advanced oxidation systems (oxidation systems, catalytic oxidation systems, and photochemical, electrochemical and sonochemical systems) are reviewed. The reaction parameters and performance of MW-AOPs in wastewater treatment are discussed, and the enhancement of pollutant degradation by MW is highlighted. In addition, the operating costs of MW-AOPs are evaluated. Some recommendations on MW-AOPs are made for future research. This review provides meaningful information on the potential development and evolution of MW-AOPs.

Monodisperse-porous Mn5O8 microspheres as an efficient catalyst for fast degradation of organic pollutants via peroxymonosulfate activation

Monodisperse-porous Mn5O8 microspheres with multiple oxidation states were used as a highly stable, efficient heterogeneous catalyst for the fast degradation of organic pollutants via peroxymonosulfate activation.

Oxygen vacancies-enriched CoFe2O4 for peroxymonosulfate activation: The reactivity between radical-nonradical coupling way and bisphenol A

Oxygen vacancies (O_V) play a vital role in catalytic activity. Herein, a series of MOF-derived CoFe₂O₄ nanomaterials with O_V tuned by a simple thermal aging strategy are prepared for peroxymonosulfate (PMS) activation. Remarkably, the stability, structural and catalytic properties show dependence on the annealing temperature. The abundant surface O_V and functional groups on CoFe₂O₄ were verified as active sites to boost catalytic activity. Based on the density functional theory (DFT) calculations, (1 1 1), (2 2 2) and (4 2 2) planes exposed at higher temperatures facilitate catalytic performance, ascribed to the intense surface adsorption energy. The quenching and electron paramagnetic resonance (EPR) experiments indicate catalysis degradation is a radical-nonradical coupling process. The reactivity between reactive oxygen species (ROS) and bisphenol A and the radical-nonradical dual degradation pathways are systematically explored by combined DFT and HPLC-MS.

Prompting direct single electron transfer to produce non-radical 1O2/H* by electro-activating peroxydisulfate process with core-shell cathode

A novel heteroatomic N, P and S co-doped core-shell material (MnFe₃O₄@PZS) was synthesized by a simple polycondensation hydro-thermal method, and used as the cathode to cooperate with electron-catalysis to activate persulfate (S₂O₈^2-) (E-MnFe₃O₄@PZS-PDS) for tetracycline (TTC) degradation. Radical scavenger studies demonstrated that non-radicals including atomic H* and singlet oxygen (¹O₂) rather than sulfate and hydroxyl radicals were the crucial reactive oxygen species (ROS). Electrochemical analysis indicated that Mn doping could promote electro-catalytic process via diverting pathway from four/two-electron to one-electron to generate non-radical H*/¹O₂ at the cathode, including one-electron oxygen reduction reaction (1e-ORR) (O₂→¹O₂), and one-electron hydrogen reduction reaction (1e-HRR) (H₂O+e^-→H^∗), as evidenced by the lowest onset potential (0.072 V) together with electron transfer number (n = 1.65). Besides, the regeneration/reduction of Fe^Ⅱ/Ⅲ/Mn^Ⅱ/Ⅲ/Ⅳ and persulfate will not cause excessive consumption of electron and chemicals due to that could directly get the electron individually from the cathode and anode, and finally TTC could be completely degraded with low energy consumption (0.655 kWh m^-3). This study provides new insights into the direct single electron activating PDS to produce non-radical H*/¹O₂ via core-shell catalytic MnFe₃O₄@PZS, and displays a promising application in wastewater treatment.

Recent advances in cobalt-activated sulfate radical-based advanced oxidation processes for water remediation: A review

Sulfate radical-based advanced oxidation processes (SR-AOPs) have attracted increasing attention for the degradation of organic contaminants in water. The oxidants of SR-AOPs could be activated to generate different kinds of reactive oxygen species (ROS, e.g., hydroxyl radicals (OH), sulfate radicals (SO₄^-), singlet oxygen (¹O₂), and superoxide radicals (O₂^-)) by various catalysts. As one of the promising catalysts, cobalt-based catalysts have been extensively investigated in catalytic activity and stability during water remediation. This article mainly summarizes recent advances in preparation and applications of cobalt-based catalysts on peroxydisulfate (PDS)/peroxymonosulfate (PMS) activation since 2016. The review covers the development of homogeneous cobalt ions, cobalt oxides, supported cobalt composites, and cobalt-based mixed metal oxides for PDS/PMS activation, especially for the latest nanocomposites such as cobalt-based metal-organic frameworks and single-atom catalysts. This article also discussed the activation mechanisms and the influencing factors of different cobalt-based catalysts for activating PDS/PMS. Finally, the future perspectives on the challenges and applications of cobalt-based catalysts are presented at the end of this paper.

A novel electrocatalytic filtration system with carbon nanotube supported nanoscale zerovalent copper toward ultrafast oxidation of organic pollutants

In this study, we designed an integrated electrochemical filtration system for catalytic activation of peroxymonosulfate (PMS) and degradation of aqueous microcontaminants. Composites of carbon nanotube (CNT) and nanoscale zero valence copper (nZVC) were developed to serve as high-performance catalysts, electrode and filtration media simultaneously. We observed both radical and nonradical reaction pathways, which collectively contributed to the degradation of model pollutants. Congo red was completely removed via a single-pass through the nZVCCNT filter (τ <2 s) at neutral pH. The rapid kinetics of Congo red degradation were maintained across a wide pH range (from 3.0-7.0), in complicated matrixes (e.g., tap water and lake water), and for the degradation of a wide array of persistent organic contaminants. The superior activity of nZVCCNT stems from the boosted redox cycles of Cu²⁺/Cu⁺ in the presence of an external electric field. The flow-through design remarkably outperformed the conventional batch system due to the convection-enhanced mass transport. Mechanism studies suggested that the carbonyl group and electrophilic oxygen of CNT served as electron donor and electron acceptor, respectively, to activate PMS to generate •OH and ¹O₂via one-electron transport. The electron-deficient Cu atoms are prone to react with PMS via surface hydroxyl group to produce reactive intermediates (Cu²⁺-O-O-SO₃^-), and then ¹O₂ will be generated by breaking the coordination bond of the metastable intermediate. The study will provide a green strategy for the remediation of organic pollution by a highly efficient and integrated system based on catalytic oxidation, electrochemistry, and nano-filtration techniques.

Evolution of Singlet Oxygen by Activating Peroxydisulfate and Peroxymonosulfate: A Review

Advanced oxidation processes (AOPs) based on peroxydisulfate (PDS) or peroxymonosulfate (PMS) activation have attracted much research attention in the last decade for the degradation of recalcitrant organic contaminants. Sulfate (SO₄^•−) and hydroxyl (^•OH) radicals are most frequently generated from catalytic PDS/PMS decomposition by thermal, base, irradiation, transition metals and carbon materials. In addition, increasingly more recent studies have reported the involvement of singlet oxygen (¹O₂) during PDS/PMS-based AOPs. Typically, ¹O₂ can be produced either along with SO₄^•− and ^•OH or discovered as the dominant reactive oxygen species (ROSs) for pollutants degradation. This paper reviews recent advances in ¹O₂ generation during PDS/PMS activation. First, it introduces the basic chemistry of ¹O₂, its oxidation properties and detection methodologies. Furthermore, it elaborates different activation strategies/techniques, including homogeneous and heterogeneous systems, and discusses the possible reaction mechanisms to give an overview of the principle of ¹O₂ production by activating PDS/PMS. Moreover, although ¹O₂ has shown promising features such as high degradation selectivity and anti-interference capability, its production pathways and mechanisms remain controversial in the present literatures. Therefore, this study identifies the research gaps and proposes future perspectives in the aspects of novel catalysts and related mechanisms.