The antimony sorption and transport mechanisms in removal experiment by Mn-coated biochar

Exploring nanomaterial-modified biochar for environmental remediation applications

Environmental pollution, particularly from heavy metals and toxic elements, poses a significant threat to both human health and ecological systems. While various remediation technologies exist, there is an urgent need for cost-effective and sustainable solutions. Biochar, a carbon-rich product derived from the pyrolysis of organic matter, has emerged as a promising material for environmental remediation. However, its pristine form has limitations, such as low adsorption capacities, a relatively narrow range of pH adaptability which can limit its effectiveness in diverse environmental conditions, and a tendency to lose adsorption capacity rapidly in the presence of competing ions or organic matters. This review aims to explore the burgeoning field of nanomaterial-modified biochar, which seeks to overcome the limitations of pristine biochar. By incorporating nanomaterials, the adsorptive and reactive properties of biochar can be significantly enhanced. Such modifications, especially biochar supported with metal nanoparticles (biochar-MNPs), have shown promise in various applications, including the removal of heavy metals, organic contaminants, and other inorganic pollutants from aqueous environments, soil, and air. This review provides a comprehensive overview of the synthesis techniques, characterization methods, and applications of biochar-MNPs, as well as discusses their underlying mechanisms for contaminant removal. It also offers insights into the advantages and challenges of using nanomaterial-modified biochar for environmental remediation and suggests directions for future research.

Cellulose nanocrystal-infused polymer hydrogel imbued with ferric-manganese oxide nanoparticles for efficient antinomy removal

Antimony is a highly poisonous pollutant that needs to be removed from water to ensured safety. In this work, we have fabricated a novel adsorbent, the ferric-manganese oxide (FeMnOx) nanoparticles embedded cellulose nanocrystal-based polymer hydrogel (FeMnOx @CNC-g-PAA/qP4VP, denoted as FMO@CPqP), specifically engineered for the remediation of antimony-laden water. Comprehensive evaluations have been conducted to investigate the efficacy of the FMO@CPqP hydrogel in removal of antimony from water. The hydrogel exhibits superior affinity for antimony, with maximum adsorption capacities of 276.1 mg/g for Sb(III) and 286.8 mg/g for Sb(V). The adsorptive dynamics, governed by the kinetics and isotherm analyses, elucidate that the immobilization of both Sb(III) and Sb(V) is facilitated through a homogeneous and monolayer chemisorption mechanism. The hydrogel has a three-dimensional interconnected porous structure and exhibits good swelling behavior, which facilitates the rapid absorption of antimony ions by this high surface area hydrogel into the channels. Furthermore, various effects, including the oxidation and inner-sphere coordination mediated by FeMnOx NPs and the electrostatic attractions of the quaternized P4VP chains, promote the immobilization of antimony species. Owing to its high removal efficiency, stability and reusability, the FMO@CPqP hydrogel emerges as an exemplary candidate for the removal of antimony contaminants in water treatment processes.

Remediation on antimony-contaminated soil from mine area using zero-valent-iron doped biochar and their effect on the bioavailability of antimony

Due to the bioavailability and movement of antimony in trophic web, the overexploitation of antimony mine resulted in antimony contamination that harmed the ecology nearby, raising concerns for public health. Whereas, most researches focused on the removal of antimony in the aqueous instead of the immobilization of antimony in the soil. Herein, the immobilized performance of biochar (BC) loaded with nano zero-valent iron (nZVI-BC) on antimony in the soil near the smelting area was researched through pot experiments for the first time, and its stabilization mechanism on antimony was investigated by valent state variation of antimony. The results demonstrated that BC restricted the cation exchange capacity and catalase activity in the soil, while nZVI-BC had a favorable and negative impact on two variables, respectively. The nZVI-BC showed more stable immobilization capacity on antimony over time than BC, whose exchangeable speciation only marginally rose (2%-6%), although the exchangeable speciation of antimony fell both from 15% to 2% after adding the BC and nZVI-BC, The electron attraction force between nZVI-BC and antimony was also intensified owing to the oxidation-reduction process, which was considered as the stabilizing principle of nZVI-BC on antimony in soil. Furthermore, the decreased bioaccumulation factor for the perennial ryegrass (0.46-0.21) and Galinsoga parviflora Cav. (0.26-0.17) stated that the BC effectively mitigated the bioaccumulation risk of antimony.

Managing antimony pollution: Insights into Soil-Plant system dynamics and remediation Strategies

Researchers are increasingly concerned about antimony (Sb) in ecosystems and the environment. Sb primarily enters the environment through anthropogenic (urbanization, industries, coal mining, cars, and biosolid wastes) and geological (natural and chemical weathering of parent material, leaching, and wet deposition) processes. Sb is a hazardous metal that can potentially harm human health. However, no comprehensive information is available on its sources, how it behaves in soil, and its bioaccumulation. Thus, this study reviews more than 160 peer-reviewed studies examining Sb's origins, geochemical distribution and speciation in soil, biogeochemical mechanisms regulating Sb mobilization, bioavailability, and plant phytotoxicity. In addition, Sb exposure effects plant physio-morphological and biochemical attributes were investigated. The toxicity of Sb has a pronounced impact on various aspects of plant life, including a reduction in seed germination and impeding plant growth and development, resulting from restricted essential nutrient uptake, oxidative damages, disruption of photosynthetic system, and amino acid and protein synthesis. Various widely employed methods for Sb remediation, such as organic manure and compost, coal fly ash, biochar, phytoremediation, microbial-based bioremediation, micronutrients, clay minerals, and nanoremediation, are reviewed with a critical assessment of their effectiveness, cost-efficiency, and suitability for use in agricultural soils. This review shows how plants deal with Sb stress, providing insights into lowering Sb levels in the environment and lessening risks to ecosystems and human health along the food chain. Examining different methods like bioaccumulation, bio-sorption, electrostatic attraction, and complexation actively works to reduce toxicity in contaminated agricultural soil caused by Sb. In the end, the exploration of recent advancements in genetics and molecular biology techniques are highlighted, which offers valuable insights into combating Sb toxicity. In conclusion, the findings of this comprehensive review should help develop innovative and useful strategies for minimizing Sb absorption and contamination and thus successfully managing Sb-polluted soil and plants to reduce environmental and public health risks.

Antimony isotopic fractionation induced by Sb(V) adsorption on β-MnO2

Antimony (Sb) isotopes hold immense promise for unraveling Sb biogeochemical cycling in environmental systems. Mn oxides help control the fate of Sb via adsorption reactions, yet the behavior and mechanisms of Sb isotopic fractionation on Mn oxides are poorly understood. In this study, we examine the Sb isotopic fractionation induced by adsorption on β-MnO2 in different experiments (kinetic, isothermal, effect of pH). We observe that adsorption on β-MnO2 surfaces preferentially enriches lighter Sb isotopes through equilibrium fractionation, with Δ123Sbaqueous-adsorbed of 0.55-0.79 ‰. Neither the pH or surface coverage affects the fractionation magnitude. The analysis of extended X-ray absorption fine structure (EXAFS) demonstrates that the enrichment of light isotope results from the adsorption of inner-sphere complexation on solids. Our finding of this study enhances our comprehension of the impact of β-MnO2 on Sb isotopic fractionation behavior and mechanism and facilitate the applicability of Sb isotopes as effective tracers to elucidate the origins and pathways of Sb contamination in environmental systems, as well as provide a new insight into forecasting the isotopic fractionation of other similar metals adsorbed by manganese oxides.

Arsenic and antimony desorption in water treatment processes: Scaling up challenges with emerging adsorbents

The metalloids arsenic (As) and antimony (Sb) belong to the pnictogen group of the periodic table; they share many characteristics, including their toxic and carcinogenic properties; and rank as high-priority pollutants in the United States and the European Union. Adsorption is one of the most effective techniques for removing both elements and desorption, for further reuse, is a part of the process to make adsorption more sustainable and feasible. This review presents the current state of knowledge on arsenic and antimony desorption from exhausted adsorbents previously used in water treatment, that has been reported in the literature. The application of different types of eluents to desorb As and Sb and their desorption performance are described. The regeneration of saturated adsorbents and adsorbate recovery techniques are outlined, including the fate of spent media and possible alternatives for waste disposal of exhausted materials. Future research directions are discussed, as well as current issues including the lack of environmental impact analysis of emerging adsorbents.

Insights into the biogeochemical transformation, environmental impacts and biochar-based soil decontamination of antimony

Every year, a significant amount of antimony (Sb) enters the environment from natural and anthropogenic sources like mining, smelting, industrial operations, ore processing, vehicle emissions, shooting activities, and coal power plants. Humans, plants, animals, and aquatic life are heavily exposed to hazardous Sb or antimonide by either direct consumption or indirect exposure to Sb in the environment. This review summarizes the current knowledge about Sb global occurrence, its fate, distribution, speciation, associated health hazards, and advanced biochar composites studies used for the remediation of soil contaminated with Sb to lessen Sb bioavailability and toxicity in soil. Anionic metal(loid) like Sb in the soil is significantly immobilized by pristine biochar and its composites, reducing their bioavailability. However, a comprehensive review of the impacts of biochar-based composites on soil Sb remediation is needed. Therefore, the current review focuses on (1) the fundamental aspects of Sb global occurrence, global soil Sb contamination, its transformation in soil, and associated health hazards, (2) the role of different biochar-based composites in the immobilization of Sb from soil to increase biochar applicability toward Sb decontamination. The review aids in developing advanced, efficient, and effective engineered biochar composites for Sb remediation by evaluating novel materials and techniques and through sustainable management of Sb-contaminated soil, ultimately reducing its environmental and health risks.

Using biochar for environmental recovery and boosting the yield of valuable non-food crops: The case of hemp in a soil contaminated by potentially toxic elements (PTEs)

Hemp (Cannabis sativa L.) is known to tolerate high concentrations of soil contaminants which however can limit its biomass yield. On the other hand, organic-based amendments such as biochar can immobilize soil contaminants and assist hemp growth in soils contaminated by potentially toxic elements (PTEs), allowing for environmental recovery and income generation, e.g. due to green energy production from plant biomass. The aim of this study was therefore to evaluate the suitability of a softwood-derived biochar to enhance hemp growth and promote the assisted phytoremediation of a PTE-contaminated soil (i.e., Sb 2175 mg kg-1; Zn 3149 mg kg-1; Pb 403 mg kg-1; and Cd 12 mg kg-1). Adding 3% (w/w) biochar to soil favoured the reduction of soluble and exchangeable PTEs, decreased soil dehydrogenase activity (by ∼2.08-fold), and increased alkaline phosphomonoesterase and urease activities, basal respiration and soil microbial carbon (by ∼1.18-, 1.22-, 1.22-, and 1.66-fold, respectively). Biochar increased the abundance of selected soil culturable microorganisms, while amplicon sequencing analysis showed a positive biochar impact on α-diversity and the induction of structural changes on soil bacterial community structure. Biochar did not affect root growth of hemp but significantly increased its aboveground biomass by ∼1.67-fold for shoots, and by ∼2-fold for both seed number and weight. Biochar increased the PTEs phytostabilisation potential of hemp with respect to Cd, Pb and Zn, and also stimulated hemp phytoextracting capacity with respect to Sb. Overall, the results showed that biochar can boost hemp yield and its phytoremediation effectiveness in soils contaminated by PTEs providing valuable biomass that can generate profit in economic, environmental and sustainability terms.

Utilizing different types of biomass materials to modify steel slag for the preparation of composite materials used in the adsorption and solidification of Pb in solutions and soil

This study utilized discarded steel slag (SS) as raw material and prepared modified steel slag materials (SS-SBC, SS-NBC, SS-BHA) through modification with biomass materials such as straw biochar (SBC), nutshell biochar (NBC), and biochemical humic acid (BHA). These materials were then applied for the removal of Pb from both solution and soil. The physical and chemical properties of the materials were analyzed using characterization techniques such as SEM, EDS, XRD, and BET. The specific surface area of the modified materials increased from the original 3.8584 m2/g to 34.7133 m2/g, 181.7329 m2/g, and 7.7384 m2/g, respectively. The study then explored the influence of different adsorption conditions on the adsorption capacity of Pb in solution, determining the optimal conditions as follows: initial concentration of 200 mg/L, adsorbent mass of 0.04 g, temperature of 15 °C, and pH = 2. To further investigate the adsorption process, kinetic and isotherm models were established. The results indicated that the adsorption process for all three materials followed a pseudo-second-order kinetic model and Freundlich isotherm model, suggesting a multi-layer chemical adsorption. Thermodynamic analysis revealed that the adsorption process was an exothermic spontaneous reaction. Soil cultivation experiments were conducted to explore the effects of different material addition amounts and cultivation times on the passivation of Pb-polluted soil. Analysis of heavy metal forms in the soil revealed that the addition of modified materials reduced the acid-extractable form of Pb in the soil and increased the residual form, which is beneficial for reducing the migration of Pb in the soil. FT-IR and XPS analyses were employed to study the functional groups, element composition, and valence states before and after adsorption passivation of Pb by the three materials. The results confirmed that the adsorption mechanisms of SS-SBC, SS-NBC, and SS-BHA mainly involved electrostatic adsorption, ion and ligand exchange, and surface precipitation. This study not only provides a new material for adsorbing and immobilizing heavy metals in soil and water but also offers a new approach for the resource utilization of steel slag waste.

Preparation of Mn-doped sludge biochar and its catalytic activity to persulfate for phenol removal

In recent years, the increasing prevalence of phenolic pollutants emitted into the environment has posed severe hazards to ecosystems and living organisms. Consequently, there is an urgent need for a green and efficient method to address environmental pollution. This study utilized waste sludge as a precursor and employed a hydrothermal-calcination co-pyrolysis method to prepare manganese (Mn)-doped biochar composite material (Mn@SBC-HP). The material was used to activate peroxydisulfate (PDS) for the removal of phenol. The study investigated various factors (such as the type and amount of doping metal, pyrolysis temperature, catalyst dosage, PDS dosage, pH value, initial phenol concentration, inorganic anions, and salinity) affecting phenol removal and the mechanisms within the Mn@SBC-HP/PDS system. Results indicated that under optimal conditions, the Mn@SBC-HP/PDS system achieved 100% removal of 100 mg/L phenol within 180 min, with a TOC removal efficiency of 82.7%. Additionally, the phenol removal efficiency of the Mn@SBC-HP/PDS system remained above 90% over a wide pH range (3-9). Free radical quenching experiments and electron spin resonance (ESR) results suggested that hydroxyl radicals (·OH) and sulfate radicals (SO4-) yed a role in the removal of phenol through radical pathways, with singlet oxygen (1O2) being the dominant non-radical pathway. The phenol removal efficiency remained above 90%, demonstrating the excellent adaptability of the Mn@SBC-HP/PDS system under the interference of coexisting inorganic anions or increased salinity. This study proposes an innovative method for the resource utilization of waste, creating metal-biochar composite catalysts for the remediation of water environments. It provides a new approach for the efficiency of organic pollutants in water environments.

Adsorption behavior of lead, cadmium, and arsenic on manganese-modified biochar: competition and promotion

Biochar adsorption of heavy metals has been a research hotspot, yet there has been limited reports on the effect of heavy metal interactions on adsorption efficiency in complex systems. In this study, the adsorbent was prepared by pyrolysis of rice straw loaded with manganese (BC-Mn). The interactions of Pb, Cd and As adsorption on BC-Mn were systematically studied. The results of the adsorption isotherms for the binary metal system revealed a competitive adsorption between Pb and Cd, resulting in decreased Pb (from 214.38 mg/g to 148.20 mg/g) and Cd (from 165.73 mg/g to 92.11 mg/g). A notable promotion occurred between As and Cd, showing an increase from 234.93 mg/g to 305.00 mg/g for As and 165.73 mg/g to 313.94 mg/g for Cd. In the ternary metal system, Pb inhibition did not counteract the promotion of Cd and As. Furthermore, the Langmuir isotherm effectively described BC-Mn's adsorption process in monometallic, binary, and ternary metal systems (R2 > 0.9294). Zeta and FTIR analyses revealed simultaneous competition between Pb and Cd for adsorption on BC-Mn's -OH sites. XPS analysis revealed that As adsorption by BC-Mn facilitated the conversion of MnO2 and MnO to MnOOH, resulting in increased hydroxyl radical production on BC-Mn's surface. Simultaneously, Cd combined with the adsorbed As to form ternary Cd-As-Mn complexes, which expedited the removal of Cd. These results help to provide theoretical support as well as technical support for the treatment of Pb-Cd-As contaminated wastewater.

Coupled sorptive and oxidative antimony(III) removal by iron-modified biochar: Mechanisms of electron-donating capacity and reactive Fe species

Sorption and oxidation are two potential pathways for the decontamination of trivalent antimony (Sb(III))-bearing water, using iron (Fe)-modified biochar (FeBC). Here we investigated the sorption and oxidation behavior of FeBC for Sb(III) in aqueous solutions. Results revealed that Sb(III) removal by FeBC was significantly improved showing the maximum Sb(III) sorption (64.0 mg g-1). Density functional theory (DFT) calculations indicated that magnetite (Fe3O4) in FeBC offered a sorption energy of -0.22 eV, which is 5 times that of non-modified biochar. With the addition of peroxymonosulfate (PMS), the sorption of Sb(III) on FeBC was 7 times higher than that on BC, indicating the sorption capacity of FeBC for Sb(III) could be substantially increased by adding oxidizing agents. Electrochemical analysis showed that Fe modification imparted FeBC higher electron-donating capacity than that of BC (0.045 v. s. 0.023 mmol e- (g biochar)-1), which might be the reason for the strong Sb(III) oxidation (63.6%) on the surface of FeBC. This study provides new information that is key for the development of effective biochar-based composite materials for the removal of Sb(III) from drinking water and wastewater. The findings from this study have important implications for protecting human health and agriculture.

A review on sources of soil antimony pollution and recent progress on remediation of antimony polluted soils

Antimony (Sb) is a serious toxic and non-essential metalloid for animals, humans, and plants. The rapid increase in anthropogenic inputs from mining and industrial activities, vehicle emissions, and shoot activity increased the Sb concentration in the environment, which has become a serious concern across the globe. Hence, remediation of Sb-contaminated soils needs serious attention to provide safe and healthy foods to humans. Different techniques, including biochar (BC), compost, manures, plant additives, phyto-hormones, nano-particles (NPs), organic acids (OA), silicon (Si), microbial remediation techniques, and phytoremediation are being used globally to remediate the Sb polluted soils. In the present review, we described sources of soil Sb pollution, the environmental impact of antimony pollution, the multi-faceted nature of antimony pollution, recent progress in remediation techniques, and recommendations for the remediation of soil Sb-pollution. We also discussed the success stories and potential of different practices to remediate Sb-polluted soils. In particular, we discussed the various mechanisms, including bio-sorption, bio-accumulation, complexation, and electrostatic attraction, that can reduce the toxicity of Sb by converting Sb-V into Sb-III. Additionally, we also identified the research gaps that need to be filled in future studies. Therefore, the current review will help to develop appropriate and innovative strategies to limit Sb bioavailability and toxicity and sustainably manage Sb polluted soils hence reducing the toxic effects of Sb on the environment and human health.

Enhanced adsorption for trivalent antimony by nano-zero-valent iron-loaded biochar: performance, mechanism, and sustainability

The discharge of tailing leachate and metallurgical wastewater has led to an increasing trend of water pollution. In this study, nZVI-modified low-temperature biochar was used to adsorb Sb(III) from water. The adsorption capacity and speed of nZVI-BC were better than those of BC, and the best adsorption effect was observed for 4nZVI-BC, with 93.60 mg·g-1 maximum adsorptive capacity, which was 208.61% higher than the original BC. The Langmuir and Temkin models were well fitted (R2 ≥ 0.99), and PSO was more in line with the 4nZVI-BC adsorption process, indicating that the adsorption was a monolayer physico-chemical adsorption. The combination of XRD, FTIR, and XPS characterization demonstrated that the adsorption mechanism predominantly included redox reactions, complexation, and electrostatic interactions. The thermodynamic results demonstrated that 4nZVI-BC adsorption on Sb(III) was a spontaneous endothermic process. Additionally, the order of the influence of interfering ions on 4nZVI-BC was CO32-  > H2PO4-  > SO42-  > Cl-. After three repeated uses and adsorption-desorption, the adsorption ratio of Sb(III) by 4nZVI-BC was still as high as 90% and 65%, respectively. This study provides a theoretical reference for the exploration and development of Sb(III) removal technologies for aquatic environments.

Mn-modified biochars for efficient adsorption and degradation of cephalexin: Insight into the enhanced redox reactivity

Mn-modified biochars (BCs) were developed by pre-treatment of feedstock (MBCs) or post-modification of biochar (BCM), for simultaneous adsorption and degradation of a model pollutant, cephalexin. The apparent removal rates of cephalexin in the presence of MBCs (2.49 - 6.39 × 10-2 h-1) and BCM (13.3 × 10-3 h-1) were significantly higher than that in the presence of biochar prepared under similar conditions (4.2 × 10-3 h-1). While the •OH generated from the activation of dissolved O2 by the persistent free radicals (PFRs) and phenolic -OH on BC could cause degradation of cephalexin, its removal was drastically enhanced through direct oxidation by the MnOx and related Mn species on Mn-modified BCs. The removal of cephalexin by MBCs decreased as the solution pH was raised from 5.0 to 9.0, which supports the critical role played by Mn3O4 in its oxidation. Removal of cephalexin in the presence of MBCs and Mn3O4 was enhanced with the introduction of Mn(II) ions, suggesting that the Mn3O4 present on MBCs facilitates the re-oxidation of Mn(II) to highly reactive Mn(III). While MnO2 anchored on BCM also enhanced the cephalexin oxidation, the active sites of BC and MnO2 were partially destroyed during post-modification of BC, compromising the redox cycling of Mn(II)/Mn(III) and the generation of •OH. As a result, the performance of BCM in oxidizing cephalexin was inferior to that of MBCs. These findings shed new light on the development of environmentally benign sorbents capable of simultaneously adsorbing and oxidizing organic pollutants.

Synthesis of co-pyrolyzed biochar using red mud and peanut shell for removing phosphate from pickling wastewater: Performance and mechanism

Iron (Fe)/iron oxide-modified biochar has practicable adsorption capability for phosphorus (P), but it is expensive. In this study, we synthesized novel low-cost and eco-friendly adsorbents co-pyrolyzed biochars using Fe-rich red mud (RM) and peanut shell (PS) wastes via a one-step pyrolysis process for removing P from pickling wastewater. The preparation conditions (heating rate, pyrolysis temperature, and feedstock ratio) and P adsorption behaviors were systematically investigated. In addition, a series of characterization and approximate site energy distribution (ASED) analyses were conducted to understand the P adsorption mechanisms. The magnetic biochar (BR7P3) with m (RM):m (PS) of 7:3 prepared at 900°C and 10 °C/min had a high surface area (164.43 m2/g) and different abundant ions (including Fe3+, and Al3+). In addition, BR7P3 exhibited the best P removal capability (142.6 mg/g). The Fe2O3 from RM was successfully reduced to Fe0, which was easily oxidized as Fe3+ to precipitate with H2PO4-. The electrostatic effect, Fe-O-P bonding, and surface precipitation were the main mechanisms of P removal. ASED analyses revealed that high distribution frequency and solution temperature led to a high P adsorption rate of the adsorbent. Therefore, this study provides new insight into the waste-to-wealth strategy by transforming PS and RM into mineral-biomass biochar with excellent P adsorption capability and environmental adaptability.

Performance and mechanism of simultaneous Sb(III) and Cd(II) removal from water by Fe-Mn binary oxide/bone char

A novel Fe-Mn binary oxide (FMBO)/bone char composite (FMBC) was synthesized and utilized to simultaneously adsorb Sb(III) and Cd(II) from aqueous phase in this study. The successful loading of Fe-Mn binary oxide on the bone char surface was revealed by the results of scanning electron microscope, X-ray diffraction patterns, and energy dispersive spectroscopy of FMBC. The FMBC exhibited remarkable ability of simultaneous removing Sb(III) and Cd(II) from aqueous, and the presence of Cd(II) enhanced Langmuir theoretical maximum adsorption capacity for Sb(III) significantly from 67.8 to 209.0 mg/g. Besides, FMBC could efficiently remove Sb(III) and Cd(II) in the wide initial pH range of 2-7. The influences of ionic strength, co-existing anions, humic acid, and temperature on the adsorption of Sb(III) and Cd(II), and the application potential of FMBC in actual groundwater were investigated. The main mechanisms of Sb(III) and Cd(II) adsorption onto FMBC involved redox, electrostatic interaction, surface complexation, ion exchange, and precipitation. The result of X-ray photoelectron spectroscopy and mapping spectrum analysis revealed that Mn(III) on FMBC played the key role in the Sb(III) oxidation, while FeOOH worked as the adsorption sites of FMBC. Meanwhile, the hydroxyapatite on FMBC also contributed to the removal of Cd(II). The presence of Cd(II) not only increased the positive charge on the surface of FMBC but also formed the Fe-Sb-Cd ternary complex, promoting the removal of Sb. This work provides valuable information for the application of FMBO/bone char as a cost-effective adsorbent to remediate co-pollution of Sb(III) and Cd(II) in aqueous environment.

Recent advancements in antimony (Sb) removal from water and wastewater by carbon-based materials: a systematic review

Antimony (Sb) has been classified as a high-priority contaminant in the environment. Sb contamination resulting from the use of antimony-containing compounds in industry necessitates the development of efficient methods to remove it from water and wastewater. Adsorption is a highly efficient and reliable method for pollutants removal owing to its availability, recyclability, and low cost. Recently, carbonaceous materials and their applications for the removal of Sb from the aqueous matrices have received special attention worldwide. Herein, this review systematically summarizes the occurrence and exposure of Sb in the environment and on human health, respectively. Different carbon-based adsorbents have been classified for the adsorptive removal of Sb and their adsorption characteristics have been delineated. Recent development in the adsorption performance of the adsorbent materials for improving the Sb removal from the aqueous medium has been outlined. Further, to develop an understanding of the effect of different parameters like pH, competitive ions, and dissolved ions for Sb adsorption and subsequent removal have been discussed. A retrospective analysis of literature was conducted to present the adsorption behavior and underlying mechanisms involved in the removal of Sb using various adsorbents. Moreover, this study has identified emerging research gaps and emphasized the need for developing modified/engineered carbonaceous adsorbents to enhance Sb adsorption from various aqueous matrices.

Removal of antimonite and antimonate in aqueous solution by mugwort biochar modified by Acidithiobacillus ferrooxidans after pyrolysis

In the research, iron oxides-biochar composites (ALBC) were prepared from pristine biochar modified by Acidithiobacillus ferrooxidans (A. ferrooxidans) and pyrolyzed at 500 °C and 700 °C in order to remove antimonite (Sb(III)) and antimonate (Sb(V)) from water. The results indicated that biochar prepared at 500 °C and 700 °C (ALBC500 and ALBC700) were loaded with Fe₂O₃ and Fe₃O₄, respectively. In bacterial modification systems, ferrous iron and total iron concentrations decreased continuously. The pH values of bacterial modification systems including ALBC500 increased first and then decreased to a stable state, while the pH values of bacterial modification systems with ALBC700 continued to decrease. The bacterial modification systems can facilitate the formation of more jarosites by A. ferrooxidans. ALBC500 had optimal adsorbing capacities for Sb(III) (18.81 mg·g^-1) and Sb(V) (14.64 mg·g^-1). The main mechanisms of Sb(III) and Sb(V) adsorption by ALBC were electrostatic interaction and pore filling.

Adsorption of chitosan combined with nicotinamide-modified eupatorium adenophorum biochar to Sb3+: Application of DFT calculation

The pollution and harm of Sb³⁺ to aquatic systems is a global problem, so Sb³⁺ removal from the water environment to make sure environment safety and human beings wellbeing is of urgency. This study explored the effect of chitosan combined with nicotinamide-modified eupatorium adenophorum biochar (CEBC) on adsorbing Sb³⁺ through batch adsorption experiments. The experiments indicated CEBC's maximum adsorption capacity to Sb³⁺ is 170.15 mg·g^-1. Meanwhile, the capacity of the original biochar (EBC) is only 9.97 mg·g^-1. Compared with EBC, CEBC contains more functional groups, such as CO, -OH and -NH₂. In addition, the pseudo-second-order kinetic model and the Langmuir model are fit to describe the kinetics and isotherms of adsorption of CEBC to Sb³⁺, which suggests that the adsorption of CEBC to Sb³⁺ is dominated by monolayer chemisorption. Density functional theory (DFT) calculations confirmed that the chelation between -NH₂ and Sb³⁺ is of significance in the adsorption process of CEBC. DFT calculations also found that the newly added -OH and CO in EBC have a synergistic enhancement effect on the absorption of Sb³⁺. The mechanism of CEBC absorbing Sb³⁺ includes electrostatic interactions, pore filling, Л-Л interactions, hydrogen bonding, functional group complexation, chelation, and oxidation. CEBC has an excellent anti-interference ability for inorganic anions (NO₃^-, SO₄^2- and Cl^-) and can also use the coexisting HA to improve its adsorption performance. In addition, CEBC has better mitigation of Sb³⁺ on the performance of Sb³⁺ about its secondary release and good reproducibility, which indicates that CEBC is a viable Sb³⁺ adsorbent.

High capacity adsorption of antimony in biomass-based composite and its consequential utilization as battery anode

Antimony is more than an emerging pollutant in water but a scare resource. In this study, we report an adsorbent with the record capacity so far from the balanced view of Sb(III) and Sb(V). The composite adsorbent was fabricated by encapsulating hollow Fe₃O₄ nanosphere with the EDTA grafted chitosan, and it has superhigh adsorption capacity of for 657.1 mg/g for Sb(III) and 467.3 mg/g for Sb(V), respectively. The mechanism study reveals that the adsorption of Sb initializes from the Fe₃O₄, propagates along the chitosan with hydrogen bond, and terminates at the inner sphere complex with the EDTA moiety in the adsorbent. In view of the ultra-high adsorption capacity of the adsorbent, the recovered adsorbent that contains abundant (>36.4%) highly dispersed antimony nanoparticles (600-FCSE-Sb) is applied to Li-ion battery anode after reduction. This article provides a new idea for connecting water treatment and electric energy storage.

Adsorption and immobilization performance of pine-cone pristine and engineered biochars for antimony in aqueous solution and military shooting range soil: An integrated novel approach

Antimony (Sb-V), a carcinogenic metalloid, is becoming prevalent in water and soil due to anthropogenic activities. Biochar could be an effective remedy for Sb(V)-contaminated water and soil. In this study, we used pristine and engineered pinecone-derived biochar as an innovative approach for treating Sb(V)-contaminated water and shooting range soil. Biochar was produced from pine-cone waste (pristine biochar) and enriched with Fe and Al salts via saturation (engineered biochar). Adsorption tests in water revealed that iron-modified biochar showed higher adsorption capacity (8.68 mg g^-1) than that of the pristine biochar (2.49 mg g^-1) and aluminum-modified biochar (3.40 mg g^-1). Isotherm and kinetic modeling of the adsorption data suggested that the adsorption process varied from monolayer to multilayer, with chemisorption as the dominant interaction mechanism between Sb(V) and the biochars. The post-adsorption study of iron-modified biochar by Fourier Transform Infrared (FTIR) and X-ray diffraction (XRD) further supported the chemical bonding and outer-sphere complexation of Sb(V) with Fe, N-H, O-H, C-O and CC components. The pristine and iron-modified biochars also successfully immobilized Sb(V) in a shooting range soil, more so in the latter. Subsequent sequential extractions and post-analysis by scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), and elemental dot mapping revealed that Sb in the treated soil transformed to a more stable form. It was concluded that iron-modified biochar could act as an efficient material for the adsorption and immobilization of Sb(V) in water and soil, respectively.

Effects of oxygen on the adsorption/oxidation of aqueous Sb(III) by Fe-loaded biochar: An X-ray absorption spectroscopy study

Fe-loaded biochar (FeBC) has been considered for Sb(III) adsorption, but the effects of oxygen (O₂) on the adsorption need further investigation. Liquid-/solid-phase analyses were conducted to investigate the role of O₂ in the Sb(III) adsorption by FeBC. The adsorption was best described by the pseudo-second-order (PSO) model for kinetic results and by the Langmuir model for thermodynamic results. More than 96.8 % of Sb(III) was adsorbed by FeBC, and available O₂ increased the liquid-phase Sb(III) oxidation efficiency by 2.1-7.5 times. The peak changes at ~1640 and 3450 cm^-1 in FTIR spectra indicated the occurrence of inner-sphere complexation between Sb(III)/Sb(V) and hydroxyl (-OH)/carboxyl (-COOH) groups in FeBC under aerobic and anaerobic conditions. Fe/Sb X-ray absorption spectroscopy (XAS) analysis results showed aqueous Sb(III) complexed to the edge-sharing Fe(III)-O-Fe(III) in FeBC. Regardless of whether O₂ was available or not, solid-phase edge-sharing Fe(III)-O-Sb(V) complexes (~3.05 Å), which had lower toxicity and migration ability than aqueous Sb(III), formed through a ligand-to-metal charge-transfer (LMCT) process. More than 91 % of adsorbed Sb(III) was oxidized to edge-sharing Fe(III)-O-Sb(V) complexes in 3 h. Additionally, the Sb(V) from liquid-phase oxidation could also directly complex to the Fe(III)-O-Fe(III) and form edge-sharing Fe(III)-O-Sb(V) complexes. These results provide evidence to inform further FeBC application for the Sb-contaminated water treatment.

Toxic effects of antimony in plants: Reasons and remediation possibilities-A review and future prospects

Antimony (Sb) is a dangerous heavy metal (HM) that poses a serious threat to the health of plants, animals, and humans. Leaching from mining wastes and weathering of sulfide ores are the major ways of introducing Sb into our soils and aquatic environments. Crops grown on Sb-contaminated soils are a major reason of Sb entry into humans by eating Sb-contaminated foods. Sb toxicity in plants reduces seed germination and root and shoot growth, and causes substantial reduction in plant growth and final productions. Moreover, Sb also induces chlorosis, causes damage to the photosynthetic apparatus, reduces membrane stability and nutrient uptake, and increases oxidative stress by increasing reactive oxygen species, thereby reducing plant growth and development. The threats induced by Sb toxicity and Sb concentration in soils are increasing day by day, which would be a major risk to crop production and human health. Additionally, the lack of appropriate measures regarding the remediation of Sb-contaminated soils will further intensify the current situation. Therefore, future research must be aimed at devising appropriate measures to mitigate the hazardous impacts of Sb toxicity on plants, humans, and the environment and to prevent the entry of Sb into our ecosystem. We have also described the various strategies to remediate Sb-contaminated soils to prevent its entry into the human food chain. Additionally, we also identified the various research gaps that must be addressed in future research programs. We believe that this review will help readers to develop the appropriate measures to minimize the toxic effects of Sb and its entry into our ecosystem. This will ensure the proper food production on Sb-contaminated soils.

Functionalized biochars: Synthesis, characterization, and applications for removing trace elements from water

Biochar (BC) has been recognized as an effective adsorbent to remove trace elements (TEs) from water. However, low surface functionality and small pore size can limit the adsorption ability of pristine biochar. These limitations can be addressed by using functionalized biochars which are developed by physical, chemical, or biological activation of biochar to improve their physico-chemical properties and adsorption efficiency. Despite the large amount of research concerning functionalized biochars in recent decades, to our knowledge, no comprehensive review of this topic has been published. This review focuses solely on the synthesis, characterization, and applications of functionalized/engineered biochars for removing TEs from water. Firstly, we evaluate the synthesis of functionalized biochars by physical, chemical, and biological strategies that yield the desired properties in the final product. The following section describes the characterization of functionalized biochars using various techniques (SEM, TEM, EDS, XRD, XANES/NEXAFS, XPS, FTIR, and Raman spectroscopy). Afterward, the role of functionalized biochars in the adsorption of different TEs from water/wastewater is critically evaluated with an emphasis on the factors affecting sorption efficiency, sorption mechanisms, fate of sorbed TEs from contaminated environments and associated challenges. Finally, we specifically scrutinized the future recommendations and research directions for the application of functionalized biochar. This review serves as a comprehensive resource for the use of functionalized biochar as an emerging environmental material capable of removing TEs from contaminated water/wastewater.

Manganese oxide-modified biochar derived from discarded mushroom-stick for the removal of Sb(III) from aqueous solution

In this study, discarded mushroom-stick, which is widely available, was selected as a precursor to prepare MnO₂-modified biochar (MBC) for Sb(III) removal. Several characterisation methods (SEM, BET, XPS, FT-IR, and XRD) were used to explore the mechanisms of antimony adsorption onto MBC. The results showed that MBC is a mesoporous material with a fluffy structure and a higher specific surface area (23.56 and 32.09 m²·g^-1) than PBC600 (13.62 m²·g^-1), exhibiting superior and stable adsorption capacities for Sb(III) (50.30 mg·g^-1 for 1/30MBC600 and 64·12 mg·g^-1 for 1/20MBC600) across a wide pH range (pH 4-8). X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FT-IR) spectroscopy analyses indicated that the main oxides and functional groups involved in the adsorption were manganese oxides and hydroxyl groups. Forty-four per cent of the adsorbed Sb(III) was oxidised to Sb(V) by manganese oxides or hydroxyl groups both on the surface of biochar and in solution. According to adsorption kinetics and isotherms, the adsorption process of Sb(III) is chemisorption, which includes monolayer and multilayer heterogeneous chemisorption processes. To sum up, MBC is an excellent adsorbent for the capture of Sb(III) from contaminated water with strong potential for future application.

Antimony redox processes in the environment: A critical review of associated oxidants and reductants

The environmental behavior of antimony (Sb) has recently received greater attention due to the increasing global use of Sb in a range of industrial applications. Although present at trace levels in most natural systems, elevated Sb concentrations in aquatic and terrestrial environments may result from anthropogenic activities. The mobility and toxicity of Sb largely depend on its speciation, which is dependent to a large extent on its oxidation state. To a certain extent, our understanding of the environmental behavior of Sb has been informed by studies of the environmental behavior of arsenic (As), as Sb and As have somewhat similar chemical properties. However, recently it has become evident that the speciation of Sb and As, especially in the context of redox reactions, may be fundamentally different. Therefore, it is crucial to study the biogeochemical processes impacting Sb redox transformations to understand the behavior of Sb in natural and engineered environments. Currently, there is a growing body of literature involving the speciation, mobility, toxicity, and remediation of Sb, and several reviews on these general topics are available; however, a comprehensive review focused on Sb environmental redox chemistry is lacking. This paper provides a review of research conducted within the past two decades examining the redox chemistry of Sb in aquatic and terrestrial environments and identifies knowledge gaps that need to be addressed to develop a better understanding of Sb biogeochemistry for improved management of Sb in natural and engineered systems.

Trivalent antimony removal using carbonaceous nanomaterial loaded with zero-valent bimetal (iron/copper) and their effect on seed growth

As rapid industrial and social growth, antimony mines are the overexploited, leading to the accumulation of trivalent antimony in the aquatic environment near smelters, which harm human health. To eradicate trivalent antimony from water, an innovative nanomaterial in the form of sludge biochar loaded with zero-valent bimetal was synthesized using a liquid-phase reduction method. The adsorption performance of the nanomaterial for trivalent antimony was investigated based on a series of adsorption experiments using sludge biochar, nano zero-valent iron biochar, and nano zero-valent bimetal biochar. The results showed that the optimal adsorption performance of the three nanomaterials for trivalent antimony, considering the economic practicability, was highlighted at solution pH of 3 and 0.05 g of nanomaterial. Additionally, the maximum adsorption capacity of sludge biochar, nano zero-valent iron biochar, and nano zero-valent bimetal biochar is 3.89 mg g^-1 at 35 °C, 32.01 mg g^-1 at 25 °C, 50.96 mg g^-1 at 25 °C, respectively. The adsorption process of sludge biochar is endothermic, resulting in an increase in the adsorption capacity with increasing temperature, whereas the exothermic reaction contributes to decrease in the adsorption capacity at increasing temperature for the other two carbon nanomaterials. The inhibitory effect of coexisting ions was in the order: Al³⁺ > NH₄⁺ > Na⁺ > K⁺; CO₃^2- > CH₃COO^- > H₂PO₄^- > S^2-. Additionally, nanomaterials promoted seed germination and growth. Investigation of the adsorption mechanism using X-ray photoelectron spectroscopy showed that trivalent antimony was oxidised to pentavalent antimony, and Fe(III) was reduced to Fe(II). The formed primary battery formed by copper ions and iron acclerated electron transfer and improved the adsorption rate. This implied that trivalent antimony could be removed through the synergistic action of the adsorption behaviour and redox reaction. Therefore, the biochar loaded with the zero-valent bimetal serves as a pathway for eradicating trivalent antimony.

Effective Sb(V) removal from aqueous solution using phosphogypsum-modified biochar

Antimonate is the dominant form of antimony (Sb) in Sb mine water. The treatment of high-Sb mine water essentially reduces the discharge of antimonate oxyanions ([Sb(OH)₆]^-) in it. Biochar obtained from phosphogypsum-modified anaerobic digested distillers' grain (PADC) can effectively adsorb antimonate from water. In this work, using batch adsorption experiments, mathematical models, and characterization methods, the mechanism of Sb(V) adsorption by PADC was studied. Compared with pristine biochar, PADC biochar showed abundant lamellar and vesicular structures with significant calcium ion loading on the surface. The kinetics data of the adsorption of Sb(V) on the PADC biochar followed the Elovich equation (R² = 0.992), indicating that heterogeneous adsorption had occurred. The results also showed that intraparticle diffusion played an important role in controlling Sb(V) adsorption by PADC biochar. The Redlich-Peterson model best fit the Sb(V) adsorption isotherm (R² = 0.997), indicating that the adsorption was a combination of the Langmuir and Freundlich models. The maximum adsorption capacity of PADC biochar for Sb(V) is 8123 mg/kg, which is more than twice that of the pristine biochar (3487 mg/kg) and is sufficient for Sb(V) treatment in most mine water. Fourier transform infrared (FTIR) spectra, X-ray photoelectron spectroscopy (XPS), X-ray diffractometry (XRD), and Transmission electron microscopy with energy dispersive X-ray spectroscopy (TEM-EDS) analyses revealed that the dominant mechanism of Sb(V) removal by PADC biochar was the formation of Ca-O-Sb complexes or amorphous surface precipitation as well as electrostatic adsorption. This work demonstrated the potential of PADC biochar in the treatment of Sb-contaminated mine water.

Antimony isotope fractionation during adsorption on aluminum oxides

The environmental fate of antimony (Sb) is often strongly affected by adsorption, and the Sb isotope fractionation mechanism during adsorption has not been reported. Four batch experiments (kinetic, isothermal, effect of pH, and effect of coexisting anions) were conducted to evaluate the mechanism of Sb(V) adsorption to γ-Al₂O₃ and the fractionation of Sb isotopes. Extended X-ray absorption fine structure (EXAFS) analyses show Sb(V) adsorption on γ-Al₂O₃ occurs via outer-sphere surface complexation. The triple-layer model (TLM) effectively predicted the theoretical Sb adsorption amount under different pH conditions. The Sb isotope fractionation in the adsorption process can be divided into an initial kinetic stage (Rayleigh model, α_{adsorbed-aqueous} = 0.99975 ± 0.00003) and subsequent isotopic equilibrium stage due to isotope exchange; however, no significant equilibrium isotope fractionation (Δ¹²³Sb_{aqueous-adsorbed} = ~0 ± 0.08‰) was evident by the end of the experiments. We propose the lack of significant equilibrium isotope fractionation in the effect of pH and isothermal experiments is due to Sb forming an outer-sphere complex on γ-Al₂O_3. This study reveals Sb equilibrium isotope fractionation does not occur during Sb(V) adsorption onto γ-Al₂O₃, providing a reference for the future study of Sb isotopes and furthering understanding of the Sb isotope fractionation mechanism.

Effective adsorption of antimony (V) from contaminated water by a novel composite manganese oxide/oxyhydroxide as an adsorbent

To obtain an efficient and low-cost adsorbent for the Sb(V) removal in Sb(V)-contaminated water, a novel composite manganese oxide/oxyhydroxide (CMO) was synthesized by a simple hydrothermal synthesis method. The synthesized adsorbent was characterized via scanning electron microscopy, X-ray diffraction, transmission electron microscopy, Brunauer-Emmett-Teller surface area, Fourier transform infrared, and X-ray photoelectron spectroscopy analyses. The results revealed that the as-prepared CMO adsorbent possessed a porous structure consisting of Mn₃O₄ nanoparticles and MnOOH nanorods. Batch experiments showed that the adsorption behaviours were well fitted by the Langmuir isotherm and the pseudo-second-order kinetic model, reaching the maximum adsorption capacity of 119.63 mg/g at 25 °C. The application of CMO adsorbent showed that the Sb(V) removal efficiency in 6.24 L Sb(V)-containing water with a concentration of 3.6 mg/L was more than 90%. The reusability of CMO adsorbent demonstrated that the Sb(V) removal efficiency was still more than 80% even after five times of regeneration. The adsorption mechanism for Sb(V) can be described as ligand exchange between hydroxyl groups on the adsorbent surface and hydroxyl groups in Sb(OH)₆^- molecules by forming inner-sphere complexes. Those results suggested that the CMO adsorbent can be considered as a potential adsorbent to remove Sb(V) from contaminated water.

Periodate activated by manganese oxide/biochar composites for antibiotic degradation in aqueous system: Combined effects of active manganese species and biochar

Developing efficient catalysts for oxytetracycline (OTC) degradation is an ideal strategy to tackle environmental pollution, and advanced oxidation processes (AOPs) have been widely used for its degradation. However, the studies on the activation of periodate (PI) by biochar and its composites in recent years have been scarcely reported. In this study, we focused on the degradation of OTC by PI activation with manganese oxide/biochar composites (Mn_xO_y@BC). Experimental results showed that the OTC degradation rate of Mn_xO_y@BC/PI system reached almost 98%, and the TOC removal efficiency reached 75%. Various characteristic analysis proved that PI could be activated efficiently by surface functional groups and manganese-active species (Mn(II), Mn(III), and Mn(IV)) on biochar, and various reactive species such as singlet oxygen (¹O₂), hydroxyl radical (∙OH), and superoxide radical (O₂^∙-) can be observed via radical quenching experiments. Based on this, three degradation pathways were proposed. Furthermore, Mn_xO_y@BC and PI were combined to degrade environmental pollutants, which achieved excellent practical benefits and had great practical application potential. We hope that it can provide new ideas for advanced oxidation processes (AOPs) applying for wastewater treatment in the future.

Review of recently used adsorbents for antimony removal from contaminated water

As prior pollutants, antimony (Sb) and its compounds are carcinogenic to threaten human health. With the development of the industry, various Sb-contained pollutants have been released into nature, thus heavily damaging the ecological environment. Effectively treating Sb-polluted waterbodies is very important and have obtained ever-growing attention. In this review, we have summarized and classified the adsorbents used for removing Sb from water in recent two decades as natural and synthetic biological adsorbents, mineral adsorbents, natural and synthetic carbon materials, metal-based adsorbents, and metal-organic frameworks. We focus on the adsorption behavior of various adsorbents for Sb, including adsorption capacity, isotherms, kinetics, thermodynamics, and effects of environmental factors (e.g., pH, coexisting anions, and natural organic matter). Meanwhile, the involved adsorption mechanisms of Sb by different adsorbents are discussed. Finally, we have outlined the development of adsorbents over the last two decades and summarized the performance characteristics of effective adsorbents, such as the rich functional groups on the surface of the adsorbents (i.e., hydroxyl, carboxyl and amino groups), and the presence of metal elements to coordinate with Sb in (i.e., iron and manganese). We hope this review give enlightenment to design adsorbents for effective removal of Sb.

Study on the Arsenate Removal from Raw As(V)-Rich Wastewater Using Zero-Valent Iron

Due to the large volumes of solid waste produced by the traditional arsenic-rich lime iron salt precipitation method treatment produced during wet-smelting by precious metal workshops, raw As(V)-rich wastewater from a domestic metallurgical enterprise was chosen as the research object. Zero-valent iron (ZVI) was used to remove arsenate (As(V)) from raw wastewater. Factors affecting the adsorption of As(V), such as the ZVI size and adsorption time, were investigated. The As(V) removal percentage was >98.2% when using 40, 100, 250, or 300 mesh ZVI in a 2.8 mg·L−1 As(V) solution at pH 7, with an iron mass–wastewater ratio of 5 g/100 mL, and 12 h reaction time. The As(V) removal percentage was >86.5% when using 40 mesh ZVI after 50 min of reaction. A comprehensive evaluation was performed on the effects of factors such as cost and water head loss. Here, 40 mesh ZVI was used for column-based separation, in which the mass of solid waste was very small. Column experiments indicated that the adsorbent more efficiently eliminated arsenate in comparison to the earlier reported adsorbents. High bed volumes (BV) of 3200 BV, 6300 BV, and 8400 BV up to a breakthrough concentration of 100 μg·L−1 were achieved for arsenate removal in the presence of 2.8 mg·L−1 of arsenic. The empty bed contact times (EBCTs) were 2.6 min, 5.1 min, and 9.8 min, respectively. Furthermore, the concentrations of other pollutants such as Cu2+, Zn2+, F−, Cd2+, Cr6+, Pb2+, and F- met the national discharge standard. The elimination of As(V) and other heavy metals from solutions employing ZVI is efficient, cheap, and produces no secondary environmental pollution, making it an ideal candidate for heavy metal removal from wastewater.

Reduction of antimony mobility from Sb-rich smelting slag by Shewanella oneidensis: Integrated biosorption and precipitation

The dissimilatory Fe(III)-reducing bacteria play a significant role in the mobility of antimony (Sb) under reducing environment. Sb-rich smelting slag is iron (Fe)-containing antimonic mine waste, which is one of the main sources of antimony pollution. In this study, the soluble antimony reacted with Fe(III) by S. oneidensis (Shewanella oneidensis strain MR-1) was performed in reduction condition, then the dissolution behavior of the Sb-rich smelting slag with S. oneidensis was investigated. The results showed that the released Sb was immobilized by S. oneidensis and the strain adsorbed Sb(III) preferentially. Sb(V) can be reduced by S. oneidensis without aqueous Fe. In the presence of Fe(III), S. oneidensis mediated Sb bio-adsorption and the chemical redox of Sb-Fe occurred simultaneously. Sb was co-precipitated with Fe to form the Sb(V)-O-Fe(III) secondary mineral, which was identified as the bidentate mononuclear edge-sharing structure by extended X-ray absorption fine structure (EXAFS) analysis. These results suggest that S. oneidensis has a positive effect on the immobilization and minimizing toxicity of antimony in anoxic soil and groundwater, which provides a theoretical basis for the treatment of antimony contamination.

Enhanced sorption of trivalent antimony by chitosan-loaded biochar in aqueous solutions: Characterization, performance and mechanisms

Contamination of aquatic systems by antimony (Sb) is a worldwide issue due to its risks to eco-environment and human health. Batch sorption experiments were conducted to assess the equilibrium, kinetics and thermodynamics of antimonite [Sb(III)] sorption by pristine biochar (BC) and chitosan-loaded biochar (CHBC) derived from branches of Ficus microcarpa. Results showed the successful loading of chitosan onto biochar surface, exhibiting more functional groups (e.g., CO, -NH₂, and -OH). Langmuir model well described the Sb(III) sorption isotherm experimental data, and the maximum sorption capacity of Sb(III) by CH₁BC (biochar loaded with chitosan at a ratio of 1:1) was 168 mg g^-1, whereas for the BC it was only 10 mg g^-1. X-ray photoelectron spectroscopy demonstrated that CH₁BC oxidized 86% of Sb(III) to Sb(V), while BC oxidized 71% of Sb(III). Density functional theory calculations suggested that the synergistic effect of exogenous hydroxyl and inherent carbonyl contributed to the enhanced removal efficiency of Sb(III) by CHBC. Key mechanisms for Sb(III) sorption onto CHBCs included electrostatic interaction, chelation, surface complexation, π-π interaction, and hydrogen bonding. Overall, this study implies that CHBC can be a new, viable sorbent for the removal of Sb(III) from aquatic systems aiding their safe and sustainable management.

The effect of co-pyrolysis temperature for iron-biochar composites on their adsorption behavior of antimonite and antimonate in aqueous solution

Iron-biochar is an efficient adsorbent for contaminants, whereas the role of prepared temperature on removal of antimony (Sb) is unacquainted. In this study, the iron-biochar composites (FBC) were fabricated by co-pyrolysis at 500°C and 800°C and applied to remove antimonite (Sb(III)) and antimonate (Sb(V)) in aqueous. The results showed Fe₃O₄ was loaded on biochar prepared at 500°C (FBC500), while FeOOH with zero-valent iron (ZVI) was formed on biochar pyrolyzed at 800°C (FBC800). However, FBC500 showed the maximum absorbance for Sb(V) (30.47 mg/g), and FBC800 had optimal removal efficiency for Sb(III) (52.30 mg/g). The sorption of Sb(III) and Sb(V) on FBC was multilayer heterogeneous chemisorption (complexation and ligand exchange). Sb(III) was oxidized to Sb(V) with less toxicity during the corrosion of ZVI on FBC800, leading to the co-precipitation of Sb₂O₅. The electrostatic interaction affected the adsorption of Sb(V) on FBC500 and FBC800. The FBC800 showed superior reusability and resistance than FBC500.

Unraveling the molecular mechanisms of Cd sorption onto MnOx-loaded biochar produced from the Mn-hyperaccumulator Phytolacca americana

Engineered biochar represents a promising material for green remediation practices. In this paper, we present an innovative approach to produce MnO_x-loaded biochars by pyrolyzing the biomass of a Mn-hyperaccumulator species (Phytolacca americana). Batch sorption and stirred-flow kinetic experiments were combined with spectroscopic techniques to elucidate the mechanisms behind the Cd sorption onto those biochars, named here as PABCs. The incorporation of MnO_x into the PABCs increased their surface densities of oxygen-containing functional groups. The average Mn leaching (< 9%) from PABCs was lower than that measured for the non-pyrolyzed biomass of P. americana (30-43%). PABCs pyrolyzed at 500 °C had Cd sorption capacities as high as 212-337 mg/g, which achieved by far the best performance reported for biochar materials. The stirred-flow experiments showed that MnO_x loading was instrumental in increasing both the Cd sorption onto PABCs as well as its irreversibility. Extended X-ray absorption fine structure spectroscopy revealed that the Cd immobilization occurred mainly through its association with organic matter (Cd-OM) and, to a lesser extent, with carbonate (CdCO₃) and MnO_x (Cd-MnO_x). In short, MnO_x-loaded biochar prepared from the biomass of a Mn-hyperaccumulator species proved to be an effective, sustainable, and eco-friendly material for remediating Cd-contaminated waters.

Antimony removal from water by pine bark tannin resin: Batch and fixed-bed adsorption

Antimony is present in water by natural causes but is also mobilized in the environment by anthropogenic activities, particularly mining. Considering its toxicological behavior, antimony removal from contaminated groundwater and mine effluents is necessary. In this work, Sb(III) and Sb(V) removal from aqueous solution was studied using a resin prepared from pine bark tannins. Subsequent iron loading of the tannin resin was tested, but this chemical modification was shown not to improve adsorptive properties. Tannin resin (unmodified form) presented a good ability to uptake antimony, with maximum adsorption capacities, evaluated in batch mode, of 30-33 mg g^-1 (Sb(III), pH 6) and 16-47 mg g^-1 (Sb(V), pH 2), depending on the particle size. The performance of the adsorbent was not affected by high levels of sulfate, which characterize most mining-impacted waters, but depending on Sb-load of the water it could be moderately affected by metal cations coexisting in solution. The applicability of the tannin resin on Sb(III) uptake was confirmed in continuous fixed-bed experiments. Breakthrough curves were obtained for different inlet adsorbate concentrations, bed heights, flow rates and aqueous media (distilled water and a simulated mine effluent). The adsorptive capacity of the tannin resin was practically maintained and adsorbent usage rates as low as 0.11 kg m^-3 were determined to treat efficiently (90% removal) 1 mg-Sb(III) L^-1 contaminated water. Overall, tannin resin is a bio-derived sorbent that shows affinity for antimony in both redox states, being stable in pH conditions commonly found in Sb-contaminated waters.

Antimony contamination and its risk management in complex environmental settings: A review

Antimony (Sb) is introduced into soils, sediments, and aquatic environments from various sources such as weathering of sulfide ores, leaching of mining wastes, and anthropogenic activities. High Sb concentrations are toxic to ecosystems and potentially to public health via the accumulation in food chain. Although Sb is poisonous and carcinogenic to humans, the exact mechanisms causing toxicity still remain unclear. Most studies concerning the remediation of soils and aquatic environments contaminated with Sb have evaluated various amendments that reduce Sb bioavailability and toxicity. However, there is no comprehensive review on the biogeochemistry and transformation of Sb related to its remediation. Therefore, the present review summarizes: (1) the sources of Sb and its geochemical distribution and speciation in soils and aquatic environments, (2) the biogeochemical processes that govern Sb mobilization, bioavailability, toxicity in soils and aquatic environments, and possible threats to human and ecosystem health, and (3) the approaches used to remediate Sb-contaminated soils and water and mitigate potential environmental and health risks. Knowledge gaps and future research needs also are discussed. The review presents up-to-date knowledge about the fate of Sb in soils and aquatic environments and contributes to an important insight into the environmental hazards of Sb. The findings from the review should help to develop innovative and appropriate technologies for controlling Sb bioavailability and toxicity and sustainably managing Sb-polluted soils and water, subsequently minimizing its environmental and human health risks.

Removal of Antimony(V) from Drinking Water Using nZVI/AC: Optimization of Batch and Fix Bed Conditions

Antimony (Sb) traces in water pose a serious threat to human health due to their negative effects. In this work, nanoscale zero-valent iron (Fe0) supported on activated carbon (nZVI) was employed for eliminating Sb(V) from the drinking water. To better understand the overall process, the effects of several experimental variables, including pH, dissolved oxygen (DO), coexisting ions, and adsorption kinetics on the removal of Sb(V) from the SW were investigated by employing fixed-bed column runs or batch-adsorption methods. A pH of 4.5 and 72 h of equilibrium time were found to be the ideal conditions for drinking water. The presence of phosphate (PO43-), silicate (SiO42-), chromate (CrO42-) and arsenate (AsO43-) significantly decreased the rate of Sb(V) removal, while humic acid and other anions exhibited a negligible effect. The capacity for Sb(V) uptake decreased from 6.665 to 2.433 mg when the flow rate was increased from 5 to 10 mL·min-1. The dynamic adsorption penetration curves of Sb(V) were 116.4% and 144.1% with the weak magnetic field (WMF) in fixed-bed column runs. Considering the removal rate of Sb(V), reusability, operability, no release of Sb(V) after being incorporated into the iron (hydr)oxides structure, it can be concluded that WMF coupled with ZVI would be an effective Sb(V) immobilization technology for drinking water.

Investigation of antimony adsorption on a zirconium-porphyrin-based metal-organic framework

A zirconium-porphyrin based organic framework PCN-222 was employed for investigating the adsorption performance of Sb(III) in aqueous solution. It is proved that the adsorbent has the advantages of rapid adsorption and high capacity. Interestingly, we discover that PCN-222 shows pH-dependent adsorption performance, with higher capacity at pH = 2 and 8 than at pH = 5. According to XPS and FT-IR analyses, an adsorption model of PCN-222 with pH = 2, 5, and 8 is proposed, that is, zirconium clusters combine with antimony at different pH values with bidentate complexes, monodentate complexes, and alkaline monodentate complexes, thus producing an excellent adsorption effect. Moreover, the porphyrin ring is also beneficial for the adsorption of antimony. In addition, PCN-222 shows good regeneration and recycling performance, and it is a promising adsorbent as well as a platform for investigating the removal of Sb(III) in water treatment.

Application of Fe-Impregnated Biochar from Cattle Manure for Removing Pentavalent Antimony from Aqueous Solution

This study assessed the applicability of Fe-impregnated biochar derived from cattle manure (Fe-CMB) as an adsorbent for removing Sb(V) from aqueous solutions and investigated the Sb(V) adsorption mechanism. Fe-CMB was mainly composed of C, O, Cl, Fe, Ca, and P, and the adsorption of Sb(V) onto Fe-CMB was identified using an energy dispersive spectrometer and Fourier transform infrared spectroscopy. Sb(V) adsorption reached equilibrium within 6 h, and the Sb(V) adsorption data as a function of time were well described by the pseudo-second-order model. The Langmuir isotherm model fit the equilibrium data better than the Freundlich model. The maximum adsorption capacity of Fe-CMB for Sb(V) obtained from the Langmuir model was 58.3 mg/g. Thermodynamic analysis of Sb(V) adsorption by Fe-CMB indicated that the adsorption process was exothermic and spontaneous. The Sb(V) removal percentage increased with the Fe-CMB dose, which achieved a removal of 98.5% at 10.0 g/L Fe-CMB. Increasing the solution pH from 3 to 11 slightly reduced Sb(V) adsorption by 6.5%. The inhibitory effect of anions on Sb(V) adsorption followed the order: Cl− ≈ NO3− < SO42− < HCO3− < PO43−.

Removal mechanism of Sb(III) by a hybrid rGO-Fe/Ni composite prepared by green synthesis via a one-step method

The annual influx of antimony (Sb) into the environment due to the widespread use of Sb compounds in industry and agriculture has become of global concern. Herein, a functional nanomaterial composite based on loading bimetallic iron/nickel nanoparticles on reduced graphene oxide (rGO-Fe/Ni) was initially prepared in a one-step phytogenic synthesis using a green tea extract. Subsequently, when applied for Sb(III) removal, the removal efficiency of rGO-Fe/Ni reached 69.7% within 3 h at an initial Sb concentration of 1.0 mg·L^-1. Advanced materials characterization via scanning electron microscopy-energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy revealed that Sb(III) was initially adsorbed onto the surface of rGO and then oxidized to Sb(V). This result was also supported by adsorption isotherm, kinetics, and thermodynamic analysis. These studies revealed that the adsorption was spontaneous and endothermic, following a Langmuir adsorption model with pseudo-second-order kinetics and allowed a Sb(III) removal mechanism based on adsorption and catalytic oxidation to be proposed. Furthermore, when rGO-Fe/Ni was practically used to remove Sb(III) in groundwater a 95.7% removal efficiency was obtained at 1 mg·L^-1 Sb(III), thus successfully demonstrating that rGO-Fe/Ni has significant potential for the practical remediation of Sb contaminated groundwater.

Antimony, a pollutant of emerging concern: A review on industrial sources and remediation technologies

Technologies for remediation of industrial effluents and natural sources contaminated with antimony - a pollutant of emerging concern - are just emerging. The complex speciation of antimony makes it challenging to devise effective remediation technologies. Antimony is used in several industrial applications and comes into the environment majorly through human induced activities such as antimony mining and other activities involving the use of various products containing antimony. Many researchers are working on the important task of developing methodologies to stop or limit the release of antimony into the environment through these activities. Antimony removal is an important requirement in nuclear industry as well due to the formation of its radioactive isotopes during power plant operations. Thus, better antimony remediation or removal techniques can have wider applications ranging from domestic water treatment and industrial effluent remediation to safe isolation of radioactive waste in the nuclear industry. Proper understanding of the problem is very important in designing the source appropriate remediation technique. Treatment methodologies needed for antimony effluents from antimony mining and smelting industries are different from antimony decontamination in nuclear reactors. The problem of antimony leaching from a polyethylene terephthalate bottle is very much different from the leaching of antimony from mining wastes. Each process necessitates custom-made treatment methodologies by taking into account various factors including the speciation and concentration. The current review is focused on this aspect. The review attempts to bring out a clear understanding on various industry specific sources of antimony pollution and the available antimony removal/remediation technologies.